Amorphous Poly Ethylene Terephthalate Research Articles

Unveiling the crystal structure of thermostable dienelactone hydrolase exhibiting activity on terephthalate esters

Dienelactone hydrolase (DLH) is one of numerous hydrolytic enzymes with an α/β-hydrolase fold, which catalyze the hydrolysis of dienelactone to maleylacetate. The DLHs share remarkably similar tertiary structures and a conserved arrangement of catalytic residues. This study presents the crystal structure and comprehensive functional characterization of a novel thermostable DLH from the bacterium Hydrogenobacter thermophilus (HtDLH). The crystal structure of the HtDLH, solved at a resolution of about 1.67 Å, exhibits a canonical α/β-hydrolase fold formed by eight β-sheet strands in the core, with one buried α-helix and six others exposed to the solvent. The structure also confirmed the conserved catalytic triad of DHLs formed by Cys121, Asp170, and His202 residues. The HtDLH forms stable homodimers in solution. Functional studies showed that HtDLH has the expected esterase activity over esters with short carbon chains, such as p-nitrophenyl acetate, reaching optimal activity at pH 7.5 and 70 °C. Furthermore, HtDLH maintains more than 50 % of its activity even after incubation at 90 °C for 16 h. Interestingly, HtDLH exhibits catalytic activity towards polyethylene terephthalate (PET) monomers, including bis-1,2-hydroxyethyl terephthalate (BHET) and 1-(2-hydroxyethyl) 4-methyl terephthalate, as well as other aliphatic and aromatic esters. These findings associated with the lack of activity on amorphous PET indicate that HtDLH has characteristic of a BHET-degrading enzyme. This work expands our understanding of enzyme families involved in PET degradation, providing novel insights for plastic biorecycling through protein engineering, which could lead to eco-friendly solutions to reduce the accumulation of plastic in landfills and natural environments.

Structural-Mechanical Modification of Amorphous Polyethylene Terephthalate and Hybrid Nanocomposite Materials Based on It

Hybrid nanocomposite materials based on polyethylene terephthalate and inorganic flame-retardant diammonium phosphate were prepared according to the fundamental strategy of environmental crazing of polymers. Structural-mechanical modification of the initial amorphous polyethylene terephthalate and the resultant nanocomposite polyethylene terephthalate-based was carried out by rolling at room temperature. The effect of preliminary rolling on the deformation behavior of polyethylene terephthalate during subsequent stretching in air and in physically active liquid media was established.

Hydrolase-Catalyzed Depolymerization Mechanism toward Crystalline and Amorphous Polyethylene Terephthalate

Hydrolase-Catalyzed Depolymerization Mechanism toward Crystalline and Amorphous Polyethylene Terephthalate

Mimicking the enzymatic plant cell wall hydrolysis mechanism for the degradation of polyethylene terephthalate

Plastic pollution presents a global challenge, impacting ecosystems, wildlife, and economies. Polyethylene terephthalate (PET), widely used in products like bottles, significantly contributes to this issue due to poor waste collection. In recent years, there has been increasing interest in plant biomass-degrading enzymes for plastic breakdown, due to the structural and physicochemical similarities between natural and synthetic polymers. Filamentous fungi involved in hemicellulose degradation have developed a complex mode of action that includes not only enzymes but also biosurfactants; surface-active molecules that facilitate enzyme-substrate interactions. For this reason, this study aimed to mimic the mechanism of biomass degradation by repurposing plant cell wall degrading enzymes including a cutinase and three esterases to cooperatively contribute to PET degradation. Surfactants of different charge were also introduced in the reactions, as their role is similar to biosurfactants, altering the surface tension of the polymers and thus improving enzymes’ accessibility. Notably, Fusarium oxysporum cutinase combined with anionic surfactant exhibited a 2.3- and 1.6-fold higher efficacy in hydrolyzing amorphous and semi-crystalline PET, respectively. When cutinase was combined with either of two ferulic acid esterases, it resulted in complete conversion of PET intermediate products to TPA, increasing the overall product release up to 1.9– fold in presence of surfactant. The combination of cutinase with a glucuronoyl esterase demonstrated significant potential in plastic depolymerization, increasing degradation yields in semi-crystalline PET by up to 1.4-fold. The approach of incorporating enzyme cocktails and surfactants emerge as an efficient solution for PET degradation in mild reaction conditions, with potential applications in eco-friendly plastic waste management.

Efficient thermophilic polyethylene terephthalate hydrolase enhanced by cross correlation-based accumulated mutagenesis strategy

Polyethylene terephthalate (PET) has caused significant pollution issues. Compared to chemical degradation with high energy consumption and cost, enzymatic degradation offers a sustainable solution for PET waste recycling. However, the hydrolytic activity of current PET hydrolases still requires improvement. In this study, a cross-correlation-based accumulated mutagenesis (CAM) strategy was developed to enhance the hydrolysis activity. By mitigating epistatic effect and combinational mutations, we achieved a highly active variant LCC-YGA (H183Y/L124G/S29A) with 2.1-fold hydrolytic activity on amorphous PET films of LCC-ICCG. Conformational analysis elucidated how the introduction of distal mutations enhanced activity. The dynamic correlation among different regions facilitated a synergistic effect, enhancing binding pocket flexibility through remote interactions. Totally, this work offers novel insights and methods for PET hydrolases engineering and provides an efficient enzyme for PET degradation and recycling.

Influence of PET as single-use contact material on gloss and surface properties of chocolate

Polyethylene terephthalate (PET) is a commonly used polymer in many industry sectors including confectionery industry. In the latter, PET is utilized for single-use moulds for chocolate manufacturing. Despite the broad application of PET in these areas, information regarding its influence on chocolate gloss and surface properties is not available. Meanwhile, it is already well established that fat crystal modification influence these properties (including gloss) distinctly. To bridge this disparity, this study examined how amorphous and glycol-copolymerized PET sheets influence non-pre-crystallised and pre-crystallised dark chocolate properties throughout a 28-day storage period. Polymorphic properties of cocoa butter were analysed via DSC. Non-pre-crystallised and pre-crystallised chocolate surfaces were characterised regarding colour, gloss, polarity, adhesion, roughness, and topography. While pre-crystallised chocolate shows consistent results, non-pre-crystallised chocolate experiences considerable changes in surface properties due to fat crystal transitions during storage. The findings show that the polymorphic state had a major impact on chocolate surface properties. Furthermore, results demonstrated that the type of PET had a significant impact on chocolate surface properties as well. Pre-crystallised chocolate gloss was significantly impacted by the choice of PET contact material. As a result, pre-crystallised chocolates exhibited a larger tendency to gloss inhomogeneities following amorphous PET monolayer sheet contact.

Constructing Escherichia coli co-display systems for biodegradation of polyethylene terephthalate

BackgroundThe accumulation of fast-growing polyethylene terephthalate (PET) wastes has posed numerous threats to the environments and human health. Enzymatic degradation of PET is a promising approach for PET waste treatment. Currently, the efficiency of various PET biodegradation systems requires further improvements.ResultsIn this work, we engineered whole cell systems with co-display of strong adhesive proteins and the most active PETase for PET biodegradation in E. coli cells. Adhesive proteins of cp52k and mfp-3 and Fast-PETase were simultaneously displayed on the surfaces of E. coli cells, and the resulting cells displaying mfp-3 showed 50% increase of adhesion ability compared to those without adhesive proteins. Consequently, the degradation rate of E. coli cells co-displaying mfp-3 and Fast-PETase for amorphous PET exceeded 15% within 24 h, exhibiting fast and thorough PET degradation.ConclusionsThrough the engineering of co-display systems in E. coli cells, PET degradation efficiency was significantly increased compared to E. coli cells with sole display of Fast-PETase and free enzyme. This feasible E. coli co-display system could be served as a convenient tool for extending the treatment options for PET biodegradation.Graphical

Glacier as a source of novel polyethylene terephthalate hydrolases.

Polyethylene terephthalate (PET) is a major component of microplastic contamination globally, which is now detected in pristine environments including Polar and mountain glaciers. As a carbon-rich molecule, PET could be a carbon source for microorganisms dwelling in glacier habitats. Thus, glacial microorganisms may be potential PET degraders with novel PET hydrolases. Here, we obtained 414 putative PET hydrolase sequences by searching a global glacier metagenome dataset. Metagenomes from the Alps and Tibetan glaciers exhibited a higher relative abundance of putative PET hydrolases than those from the Arctic and Antarctic. Twelve putative PET hydrolase sequences were cloned and expressed, with one sequence (designated as GlacPETase) proven to degrade amorphous PET film with a similar performance as IsPETase, but with a higher thermostability. GlacPETase exhibited only 30% sequence identity to known active PET hydrolases with a novel disulphide bridge location and, therefore may represent a novel PET hydrolases class. The present work suggests that extreme carbon-poor environments may harbour a diverse range of known and novel PET hydrolases for carbon acquisition as an environmental adaptation mechanism.

Deep learning guided enzyme engineering of Thermobifida fusca cutinase for increased PET depolymerization

A responsible and sustainable circular economy of polymers requires efficient recycling processes with a low CO2 footprint. Enzymatic depolymerization of polyethylene terephthalate (PET) is a first step to make PET polymers a part of a circular economy of polymers. In this study, a structure-based deep learning model was utilized to identify residues in TfCut2 that are responsible for improved hydrolytic activity and enhanced stability. Machine learning guided design identified novel beneficial positions (L32E, S35E, H77Y, R110L, S113E, T237Q, R245Q, and E253H), which were evaluated and stepwise recombined yielding finally the beneficial variant L32E/S113E/T237Q. The latter TfCut2 variant exhibited improved PET depolymerization when compared with TfCut2 WT (amorphous PET film, 2.9-fold improvement // crystalline PET powder (crystallinity > 40%), 5.3-fold improvement). In terms of thermal resistance the variant L32E/S113E/T237Q showed a 5.7 °C increased half-inactivation temperature (T5060). The PET-hydrolysis process was monitored via a quartz crystal microbalance with dissipation monitoring (QCM-D) in real-time to determine depolymerization kinetics of PET coated onto the gold sensor. Finally, conformational dynamics analysis revealed that the substitutions induced a conformational change in the variant L32E/S113E/T237Q, in which the dominant conformation enabled a closer contact between the catalytic site and PET resulting in increased PET-hydrolysis. Overall, this study demonstrates the potential of deep learning models in protein engineering for identifying and designing efficient PET depolymerization enzymes.

Fabrication and characterization of a bifunctional zinc oxide/multiwalled carbon nanotube/ poly(3,4-ethylenedioxythiophene): Polystyrene sulfonate composite thin film

Hybrid thin film sensors based on semiconductor oxides and carbon nanostructures are promising materials to improve the sensing, thermomechanical and optical properties. In this study, a thin film based on a composite from ZnO nanoparticles, milled multiwalled carbon nanotubes, and conducting polymer was fabricated. The layer was spray-coated to the surface of amorphous polyethylene terephthalate substrate. The hybrid layer and components have been systematically characterized by transmission and scanning electron microscopy, dynamic light scattering and the optical absorption spectrum was observed by ultraviolet-visible spectroscopy. The change in glass transition temperature was measured by dynamic mechanical analysis. Gas sensing tests reveal that the ZnO/multiwalled carbon nanotube/ poly(3,4-ethylenedioxythiophene): polystyrene sulfonate film on amorphous polyethylene terephthalate has remarkably enhanced performance compared to the same layer on indium tin oxide /polyethylene terephthalate. It could detect ethanol vapor in a wide concentration range with good response, fast recovery, and repeatability at room temperature. The layer was also tested as an ultraviolet photodetector, showing a promising signal. These features indicate the composite usability in further sensor applications.

Structure and function of the metagenomic plastic-degrading polyester hydrolase PHL7 bound to its product

The recently discovered metagenomic-derived polyester hydrolase PHL7 is able to efficiently degrade amorphous polyethylene terephthalate (PET) in post-consumer plastic waste. We present the cocrystal structure of this hydrolase with its hydrolysis product terephthalic acid and elucidate the influence of 17 single mutations on the PET-hydrolytic activity and thermal stability of PHL7. The substrate-binding mode of terephthalic acid is similar to that of the thermophilic polyester hydrolase LCC and deviates from the mesophilic IsPETase. The subsite I modifications L93F and Q95Y, derived from LCC, increased the thermal stability, while exchange of H185S, derived from IsPETase, reduced the stability of PHL7. The subsite II residue H130 is suggested to represent an adaptation for high thermal stability, whereas L210 emerged as the main contributor to the observed high PET-hydrolytic activity. Variant L210T showed significantly higher activity, achieving a degradation rate of 20 µm h−1 with amorphous PET films.

Comparison of the enzymatic depolymerization of polyethylene terephthalate and AkestraTM using Humicola insolens cutinase

The enzymatic depolymerization of synthetic polyesters has become of great interest in recycling plastics. Most of the research in this area focuses on the depolymerization of polyethylene terephthalate (PET) due to its widespread use in various applications. However, the enzymatic activity on other commercial polyesters is less frequently investigated. Therefore, AkestraTM attracted our attention, which is a copolymer derived from PET with a partially biobased spirocyclic acetal structure. In this study, the activity of Humicola insolens cutinase (HiCut) on PET and AkestraTM films and powder was investigated. HiCut showed higher depolymerization activity on amorphous PET films than on Akestra™ films. However, an outstanding performance was achieved on AkestraTM powder, reaching 38% depolymerization in 235h, while only 12% for PET powder. These results are consistent with the dependence of the enzymes on the crystallinity of the polymer since Akestra™ is amorphous while the PET powder has 14% crystallinity. On the other hand, HiCut docking studies and molecular dynamic simulations (MD) suggested that the PET-derived mono (hydroxyethyl)terephthalate dimer (MHET)2 is a hydrolyzable ligand, producing terephthalic acid (TPA), while the Akestra™-derived TPA-spiroglycol ester is not, which is consistent with the depolymerization products determined experimentally. MD studies also suggest ligand-induced local conformational changes in the active site.

Efficient depolymerization of polyethylene terephthalate (PET) and polyethylene furanoate by engineered PET hydrolase Cut190

The enzymatic recycling of polyethylene terephthalate (PET) can be a promising approach to tackle the problem of plastic waste. The thermostability and activity of PET-hydrolyzing enzymes are still insufficient for practical application. Pretreatment of PET waste is needed for bio-recycling. Here, we analyzed the degradation of PET films, packages, and bottles using the newly engineered cutinase Cut190. Using gel permeation chromatography and high-performance liquid chromatography, the degradation of PET films by the Cut190 variant was shown to proceed via a repeating two-step hydrolysis process; initial endo-type scission of a surface polymer chain, followed by exo-type hydrolysis to produce mono/bis(2-hydroxyethyl) terephthalate and terephthalate from the ends of fragmented polymer molecules. Amorphous PET powders were degraded more than twofold higher than amorphous PET film with the same weight. Moreover, homogenization of post-consumer PET products, such as packages and bottles, increased their degradability, indicating the importance of surface area for the enzymatic hydrolysis of PET. In addition, it was required to maintain an alkaline pH to enable continuous enzymatic hydrolysis, by increasing the buffer concentration (HEPES, pH 9.0) depending on the level of the acidic products formed. The cationic surfactant dodecyltrimethylammonium chloride promoted PET degradation via adsorption on the PET surface and binding to the anionic surface of the Cut190 variant. The Cut190 variant also hydrolyzed polyethylene furanoate. Using the best performing Cut190 variant (L136F/Q138A/S226P/R228S/D250C-E296C/Q123H/N202H/K305del/L306del/N307del) and amorphous PET powders, more than 90 mM degradation products were obtained in 3 days and approximately 80 mM in 1 day.Graphical

Microbial enzymes will offer limited solutions to the global plastic pollution crisis.

Global economies depend on the use of fossil-fuel-based polymers with 360-400 million metric tons of synthetic polymers being produced per year. Unfortunately, an estimated 60% of the global production is disposed into the environment. Within this framework, microbiologists have tried to identify plastic-active enzymes over the past decade. Until now, this research has largely failed to deliver functional biocatalysts acting on the commodity polymers such as polyethylene (PE), polypropylene (PP), polyvinylchloride (PVC), ether-based polyurethane (PUR), polyamide (PA), polystyrene (PS) and synthetic rubber (SR). However, few enzymes are known to act on low-density and low-crystalline (amorphous) polyethylene terephthalate (PET) and ester-based PUR. These above-mentioned polymers represent >95% of all synthetic plastics produced. Therefore, the main challenge microbiologists are currently facing is in finding polymer-active enzymes targeting the majority of fossil-fuel-based plastics. However, identifying plastic-active enzymes either to implement them in biotechnological processes or to understand their potential role in nature is an emerging research field. The application of these enzymes is still in its infancy. Here, we summarize the current knowledge on microbial plastic-active enzymes, their global distribution and potential impact on plastic degradation in industrial processes and nature. We further outline major challenges in finding novel plastic-active enzymes, optimizing known ones by synthetic approaches and problems arising through falsely annotated and unfiltered use of database entries. Finally, we highlight potential biotechnological applications and possible re- and upcycling concepts using microorganisms.

Metabolic engineering of Yarrowia lipolytica for poly(ethylene terephthalate) degradation

Polyethylene terephthalate (PET) is the most widely used plastic, whose global production scale causes serious problems due to it being highly non-biodegradable. The present work provides a novel approach to plastic degradation studies, which involves direct degradation of PET in the culture of a modified Y. lipolytica yeast strain extracellularly producing cutinase from Fusarium solani. In this study, we successfully accomplished a scale-up of the degradation process in culture, which is promising from the perspective of wider application of the developed method in the future. Additionally, we tested the effect of various supplements, which may increase the PET degradation efficiency in the culture of the Y. lipolytica pAD CUT_FS strain. The ability of PET decomposition was verified by the amount of the released degradation products, such as terephthalic acid (TPA) and mono-(2-hydroxyethyl)-terephthalic acid (MHET), during cultivation. We observed that the quantities of TPA and MHET released during the PET degradation process were increasing daily, and were 1.51 gL−1 and 0.45 gL−1, respectively after 240 h of the bioreactor fermentation. Analysis of the PET film by electron microscopy indicated that there was abundant damage on the surface of the material. This study also demonstrated that the engineered Y. lipolytica strain is able to degrade PET at 28 °C during fermentation. The results obtained in this study using amorphous PET powder provide a wide range of possibilities for application of the cutinase-secreting strain of Y. lipolytica on the more difficult to degrade highly crystalline PET films, PET bottles and PET melts.

Influence of substrate crystallinity and glass transition temperature on enzymatic degradation of polyethylene terephthalate (PET)

This work examines the significance of the degree of crystallinity (XC) of polyethylene terephthalate (PET) and the PET glass transition temperature (Tg) on enzymatic degradation of PET at elevated temperatures using two engineered, thermostable PET degrading enzymes: LCCICCG, a variant of the leaf-branch compost cutinase, and DuraPETase, evolved from the Ideonella sakaiensis PETase. The XC was systematically varied by thermal annealing of PET disks (Ø 6 mm, thickness 1 mm). The XC affected the enzymatic product release rate that essentially ceased at XC 22–27% for the LCCICCG and at XC ∼17% for the DuraPETase. Scanning Electron Microscopy revealed that enzymatic treatment produced cavities on the PET surface when the XC was > 10% but resulted in a smooth surface on amorphous PET (XC ∼10%). The Tg of amorphous PET disks decreased from 75 °C to 60 °C during 24 h pre-soaking in water at 65 °C, while the XC remained unchanged. Enzymatic reaction on pre-soaked disks at 68 °C, i.e. above the Tg, did not affect the enzymatic product release rate catalyzed by LCCICCG. These findings improve the understanding of enzymatic PET degradation and have implications for development of efficient enzymatic PET upcycling processes.

Low Carbon Footprint Recycling of Post-Consumer PET Plastic with a Metagenomic Polyester Hydrolase.

Earth is flooded with plastics and the need for sustainable recycling strategies for polymers has become increasingly urgent. Enzyme‐based hydrolysis of post‐consumer plastic is an emerging strategy for closed‐loop recycling of polyethylene terephthalate (PET). The polyester hydrolase PHL7, isolated from a compost metagenome, completely hydrolyzes amorphous PET films, releasing 91 mg of terephthalic acid per hour and mg of enzyme. Vertical scanning interferometry shows degradation rates of the PET film of 6.8 μm h−1. Structural analysis indicates the importance of leucine at position 210 for the extraordinarily high PET‐hydrolyzing activity of PHL7. Within 24 h, 0.6 mgenzyme gPET −1 completely degrades post‐consumer thermoform PET packaging in an aqueous buffer at 70 °C without any energy‐intensive pretreatments. Terephthalic acid recovered from the enzymatic hydrolysate is then used to synthesize virgin PET, demonstrating the potential of polyester hydrolases as catalysts in sustainable PET recycling processes with a low carbon footprint.

The Bacteroidetes Aequorivita sp. and Kaistella jeonii Produce Promiscuous Esterases With PET-Hydrolyzing Activity.

Certain members of the Actinobacteria and Proteobacteria are known to degrade polyethylene terephthalate (PET). Here, we describe the first functional PET-active enzymes from the Bacteroidetes phylum. Using a PETase-specific Hidden-Markov-Model- (HMM-) based search algorithm, we identified several PETase candidates from Flavobacteriaceae and Porphyromonadaceae. Among them, two promiscuous and cold-active esterases derived from Aequorivita sp. (PET27) and Kaistella jeonii (PET30) showed depolymerizing activity on polycaprolactone (PCL), amorphous PET foil and on the polyester polyurethane Impranil® DLN. PET27 is a 37.8 kDa enzyme that released an average of 174.4 nmol terephthalic acid (TPA) after 120 h at 30°C from a 7 mg PET foil platelet in a 200 μl reaction volume, 38-times more than PET30 (37.4 kDa) released under the same conditions. The crystal structure of PET30 without its C-terminal Por-domain (PET30ΔPorC) was solved at 2.1 Å and displays high structural similarity to the IsPETase. PET30 shows a Phe-Met-Tyr substrate binding motif, which seems to be a unique feature, as IsPETase, LCC and PET2 all contain Tyr-Met-Trp binding residues, while PET27 possesses a Phe-Met-Trp motif that is identical to Cut190. Microscopic analyses showed that K. jeonii cells are indeed able to bind on and colonize PET surfaces after a few days of incubation. Homologs of PET27 and PET30 were detected in metagenomes, predominantly aquatic habitats, encompassing a wide range of different global climate zones and suggesting a hitherto unknown influence of this bacterial phylum on man-made polymer degradation.

Engineering and evaluation of thermostable IsPETase variants for PET degradation.

Polyethylene terephthalate (PET) is a mass‐produced petroleum‐based synthetic polymer. Enzymatic PET degradation using, for example, Ideonella sakaiensis PETase (IsPETase) can be a more environmentally friendly and energy‐saving alternative to the chemical recycling of PET. However, IsPETase is a mesophilic enzyme with an optimal reaction temperature lower than the glass transition temperature (T g) of PET, where the amorphous polymers can be readily accessed for enzymatic breakdown. In this study, we used error‐prone PCR to generate a mutant library based on a thermostable triple mutant (TM) of IsPETase. The library was screened against the commercially available polyester‐polyurethane Impranil DLN W 50 for more thermostable IsPETase variants, yielding four variants with higher melting points. The most promising IsPETaseTMK95N/F201I variant had a 5.0°C higher melting point than IsPETaseTM. Although this variant showed a slightly lower activity on PET at lower incubation temperatures, its increased thermostability makes it a more active PET hydrolase at higher reaction temperatures up to 60°C. Several other variants were compared and combined with selected previously published IsPETase mutants in terms of thermostability and hydrolytic activity against PET nanoparticles and amorphous PET films. Our findings indicate that thermostability is one of the most important characteristics of an effective PET hydrolase.

The proliferation and colonization of functional bacteria on amorphous polyethylene terephthalate: Key role of ultraviolet irradiation and nonionic surfactant polysorbate 80 addition

Environmental pollution with plastics including polyethylene terephthalate (PET) has become a severe global problem, especially microplastic pollution, which is acknowledged as an emerging global pollutant. Biodegradation as a feasible and promising method has been studied, while colonization as the initiating step of the degradation process has seldom been studied. Here in this paper, we explored for the first time the key role of ultraviolet (UV) irradiation and nonionic surfactant polysorbate 80 (Tween-80, 0.2% V/V) in the proliferation and colonization of three functional bacteria (Pseudomonas putida, Pseudomonas sp. and Paracoccus sp.) on amorphous PET (APET). We found that 25 days of UV irradiation can trigger photolytic degradation process (appear the stretching vibration of associating carboxyl end group and the in-plane bending vibration of -OH) and introduce oxygen-containing functional groups on the surface of APET, even though the hydrophobicity of APET was scarcely changed. With regard to Tween-80, it can be utilized by these bacteria strains as carbon source to promote the proliferation, and it can also improve the cell surface hydrophobicity to stimulate the bacterial colonization during the first ten days of the experiment. When UV-irradiation and Tween-80 were provided together, the former factor can provide the target sites for functional bacteria to colonize, and the later factor can provide more candidates waiting to colonize by stimulating proliferation. As a result, an even better proliferation and colonization result can be achieved through the synergistic effect between the two factors. To some extent, the exposure between potential degrading bacteria and substrates to be degraded can be increased, which will create conditions for degrading. Generally, this research can provide certain theoretical basis and technical guidance for the remediation of plastic-polluted soil and the ocean.