Ammonium Adduct Research Articles

Human Brain Lipidomics: Utilities of Chloride Adducts in Flow Injection Analysis.

Ceramides have been implicated in a number of disease processes. However, current means of evaluation with flow infusion analysis (FIA) have been limited primarily due to poor sensitivity within our high-resolution mass spectrometry lipidomics analytical platform. To circumvent this deficiency, we investigated the potential of chloride adducts as an alternative method to improve sensitivity with electrospray ionization. Chloride adducts of ceramides and ceramide subfamilies provided 2- to 50-fold increases in sensitivity both with analytical standards and biological samples. Chloride adducts of a number of other lipids with reactive hydroxy groups were also enhanced. For example, monogalactosyl diacylglycerols (MGDGs), extracted from frontal lobe cortical gray and subcortical white matter of cognitively intact subjects, were not detected as ammonium adducts but were readily detected as chloride adducts. Hydroxy lipids demonstrate a high level of specificity in that phosphoglycerols and phosphoinositols do not form chloride adducts. In the case of choline glycerophospholipids, the fatty acid substituents of these lipids could be monitored by MS2 of the chloride adducts. Monitoring the chloride adducts of a number of key lipids offers enhanced sensitivity and specificity with FIA. In the case of glycerophosphocholines, the chloride adducts also allow determination of fatty acid substituents. The chloride adducts of lipids possessing electrophilic hydrogens of hydroxyl groups provide significant increases in sensitivity. In the case of glycerophosphocholines, chloride attachment to the quaternary ammonium group generates a dominant anion, which provides the identities of the fatty acid substituents under MS2 conditions.

Analysis of Free and Esterified Sterol Content and Composition in Seeds Using GC and ESI-MS/MS.

Total sterol content and composition in plant tissues can be easily determined by gas chromatography (GC) after saponification of the total lipid extract. However, in oleogenic tissues a significant proportion of the sterol is esterified to fatty acids, with GC methodologies unable to provide information about the proportion and the molecular species composition of intact steryl esters (SEs). Here we describe an electrospray ionization-tandem mass spectrometry (ESI-MS/MS) and Multiple Reaction Monitoring (MRM) method which, in parallel with GC analysis, allows for the accurate determination of both free and esterified sterol content and composition in seeds. After extraction of seed oil with hexane, free sterols are derivatized with undecanoyl chloride, total steryl esters are then purified from triacylglycerol (TAG) by liquid chromatography, infused and ionized as ammonium adducts, with molecular species identified and quantified by fragmentation in the presence of internal standards.

Adduct annotation in liquid chromatography/high-resolution mass spectrometry to enhance compound identification

Annotation and interpretation of full scan electrospray mass spectra of metabolites is complicated by the presence of a wide variety of ions. Not only protonated, deprotonated, and neutral loss ions but also sodium, potassium, and ammonium adducts as well as oligomers are frequently observed. This diversity challenges automatic annotation and is often poorly addressed by current annotation tools. In many cases, annotation is integrated in metabolomics workflows and is based on specific chromatographic peak-picking tools. We introduce mzAdan, a nonchromatography-based multipurpose standalone application that was developed for the annotation and exploration of convolved high-resolution ESI-MS spectra. The tool annotates single or multiple accurate mass spectra using a customizable adduct annotation list and outputs a list of [M+H]+ candidates. MzAdan was first tested with a collection of 408 analytes acquired with flow injection analysis. This resulted in 402 correct [M+H]+ identifications and, with combinations of sodium, ammonium, and potassium adducts and water and ammonia losses within a tolerance of 10 mmu, explained close to 50% of the total ion current. False positives were monitored with mass accuracy and bias as well as chromatographic behavior which led to the identification of adducts with calcium instead of the expected potassium. MzAdan was then integrated in a workflow with XCMS for the untargeted LC-MS data analysis of a 52 metabolite standard mix and a human urine sample. The results were benchmarked against three other annotation tools, CAMERA, findMAIN, and CliqueMS: findMAIN and mzAdan consistently produced higher numbers of [M+H]+ candidates compared with CliqueMS and CAMERA, especially with co-eluting metabolites. Detection of low-intensity ions and correct grouping were found to be essential for annotation performance.Graphical abstract

Analyses of the brominated vegetable oil in soft drinks using gas chromatography–flame ionization detector and atmospheric pressure gas chromatography–quadrupole/time-of-flight mass spectrometry

Herein, a new method for quantifying the brominated vegetable oil content in commercial soft drinks was developed, which accelerated the sample preparation process and improved analytical efficiency. First, simple and accurate chromatographic separation techniques were performed using a VF-5ht column for both GC-FID (quantitative) and APGC-QTOF (qualitative) analyses. The samples were subjected to chromatography on a reversed-phase solid-phase extraction cartridge. (PoraPak™RxnRP). Transesterification using a boron trifluoride methanol complex in methanol solution was performed. When validating this method, the analyte recovery percentages were between 82.2% and 99.9%, and the recovery and standard deviation of repeatability values were between 1.2% and 3.5%. Using an isotope library, the bromostearic acid methyl esters (9,10-dibromostearic acid methyl ester, 9,10,12,13-tetrabromostearic acid methyl ester, and hexabromostearic acid methyl ester) in the sample mixtures were qualitatively confirmed via APGC-QTOF. A novel aqueous ammonium adduct, which has not been previously reported, was also confirmed. These results indicated that this new method was simple, accurate, and also allowed for precise qualitative and quantitative confirmation as well as high reproducibility.

Optimal conditions for tandem mass spectrometric sequencing of information-containing nitrogen-substituted polyurethanes.

To prevent solubility issues faced with sequence-defined polyurethanes, a new family of digital polyurethanes was conceived with the alkyl coding chain held by the carbamate nitrogen (N) atom and CH3 instead of OH as the ϖ termination. This led to different dissociation mechanisms that were explored prior to optimizing tandem mass spectrometric (MS/MS) sequencing. N-Substituted polyurethanes (N-R PUs) were dissolved in methanol and subjected to collision-induced dissociation (CID) as deprotonated chains in the negative ion mode, and as ammonium and sodium adducts in the positive ion mode, using electrospray ionization (ESI) as the ionization technique. Their dissociation behavior was thoroughly investigated using a quadrupole time-of-flight (QTOF) instrument in order to provide accurate mass measurements to support proposed fragmentation mechanisms. While O-(CO) bonds were broken in N-H PUs, the CH2 -O linkage between repeating units was cleaved upon CID of N-R PUs. This main process occurred either from deprotonated molecules or from cationized chains but was followed by different rearrangements, producing up to four product ion series. Yet, MS/MS spectra could be drastically simplified for precursor ions having their acidic α group methylated, as was found to spontaneously occur upon storage in methanol. Using experimental conditions aimed at avoiding any reactive proton in precursor ions (no acidic end-groups and alkali adduction), full coverage sequence of N-R PUs was successfully achieved with the single ion series observed in MS/MS, opening a promising perspective for reading large amounts of information stored in these dyad-encoded polymers.

Profiling of Cholesteryl Esters by Coupling Charge-Tagging Paternò-Büchi Reaction and Liquid Chromatography-Mass Spectrometry.

The profile of cholesteryl esters (CEs) is increasingly used in metabolic disease monitoring due to the roles of CE in regulating the cholesterol level. While electrospray ionization-tandem mass spectrometry is routinely applied for the identification and quantitation of CE, it has a limitation of not being able to provide the location of carbon-carbon double bond (C═C) within unsaturated fatty acyls. In this study, we paired offline 2-acetylpyridine (2-AP) Paternò-Büchi (PB) reaction and reversed-phase liquid chromatography-tandem mass spectrometry to achieve highly sensitive and structural informative CE analysis from complex mixtures. The 2-AP PB reactions of CE standards provided 20-30% conversion but resulted in enhanced ion signal relative to that of intact CE detected as ammonium adduct ions. MS/MS of 2-AP derivatized CE via collision-induced dissociation produced two abundant diagnostic ions for each C═C in a fatty acyl, leading to both sensitive identification and quantitation of C═C location isomers. Twelve saturated and twenty-seven unsaturated CEs were profiled in pooled human plasma; of the latter group, relative quantitation of 6 groups of C═C location isomers was achieved. A dehydrocholesteryl ester, DHE 18:2 (Δ9,12), was confidently differentiated from coexisting compositional isomers: CE 18:3 (Δ9,12,15) and CE 18:3 (Δ6,9,12). The above results represented improved CE coverage at the C═C location level over those reported by gas chromatography MS or acetone PB-MS/MS methods.

A high-throughput LC-MS/MS method for the measurement of the bile acid/salt content in microbiome-derived sample sets

Due to the physicochemical properties of bile acids/salts (i.e., hydrophobic and ionizable), the application of reverse-phase liquid chromatography-tandem mass spectrometry (LC-MS/MS)-based methods are ideally suited for the measurement of these compounds in a host of microbiologically-relevant matrices. Here, we provide a detailed bioanalytical protocol that contains several modifications of a method previously described by Wegner et al. [1]. Briefly, this modified method exhibits the following advantages for the measurement of cholic acid (CA), taurocholic acid (TCA), and deoxycholic acid (DCA) in microbiome-relevant sample matrices: i) fecal sample processing has been streamlined by the elimination of lyophilization and manual homogenization steps; ii) the Sciex 6500 QTRAP hybrid triple-quadrupole/linear ion trap mass spectrometer has sufficient sensitivity to perform the measurement of bile acids/salts in negative ion mode – ammonium adducts of bile acids/salts are not required for detection; and, iii) assay throughput has been boosted by more than 5-fold by shortening the chromatographic duty cycle of a single sample injection from 45 min to 8.4 min. Recently, the method was used to perform 508 sequential injections (72 calibration standards, 52 blank-internal standard sample, and 368 MiniBioReactor Array (MBRA)-derived samples) from four separate batches over a 4-day time period.

Quantitation of Cyclosporin A in Cell Culture Media by Differential Mobility Mass Spectrometry (DMS-MS/MS).

Cell permeability is an important factor in determining the bioavailability of therapeutics that is usually measured by cell culture testing. The concentration of pharmaceutical in a medium such as Hank's Balanced Salt Solution with HEPES organic buffer (HBSS-HEPES) is measured at a series of time points, making simplicity and high throughput of the analytical method important characteristics. We report an electrospray differential mobility spectrometry mass spectrometry method (nanoESI-DMS-MS) for the rapid determination of cyclosporin A (CsA, cyclosporine) concentration in such a buffer. DMS technology provides gas phase atmospheric pressure ion filtration for small-molecule bioanalytical methods that suppresses interfering ions and reduces chemical noise, without the use of chromatography. This allows simplified sample preparation, fast calibration curve development, and shortened analysis times. It has also been noted that the DMS prefilter can reduce contamination of the mass spectrometer by salts, thereby extending mass spectrometer system uptime.In the application described here, DMS-MS/MS is applied to cyclosporine A (CsA) in cell medium. Sample preparation is limited to dilution with an ammonium acetate-methanol-water mobile phase and the addition of CsA-d4 internal standard. The isotope ratio data are obtained in DMS-MS MRM mode observing NH3 loss from the ammonium adduct of the two species. A calibration curve with high linearity (R2=0.998) is rapidly obtained with nearly zero intercept, while it was found that a liquid chromatography LC-MS method required a preliminary SPE step to obtain a linear calibration curve. The time for data acquisition in the DMS-MS MRM method with flow injection (FIA) or infusion introduction at ESI flow of 400nL/min is typically 30s leading to a cycle time of less than 1min.

RAPID, METHOD FOR DETERMINATION OF METFORMIN AND CANAGLIFLOZIN IN PLASMA BY LIQUID CHROMATOGRAPHY-TANDEM MASS SPECTROMETER, APPLICATION TO BIOEQUIVALENCE STUDY

Objective: The objective of the study was to develop and validate a rapid selective bioanalytical method for the simultaneous determination of metformin and canagliflozin in plasma by liquid chromatography-tandem mass spectrometer (LC-MS/MS) to facilitate bioequivalence study sample analysis. Stock solutions and spiking solutions were prepared accurately in methanol and 80% methanol in water, respectively.
 Methods: Chromatography monitored using Analyst 1.6.2 software. Method was found selective, no matrix effect, reproducible and consistent recovery, accuracy, precision, and stable in aqueous as well as extracted/matrix samples. Method found linear over the range 10–2000 ng/ml for metformin and 30–6000 ng/ml for canagliflozin. The method is successfully applied to analyze samples collected in a bioequivalence study after administration of metformin/canagliflozin 1000/150 mg to 24 healthy male volunteers.
 Results: Extraction was carried out using a simple solid phase extraction using mobile phase elution. 5 μl sample delivered as injection volume in 1.000 ml/min isocratic mobile phase flow on turbo ion electron spray technique for positive mode on API 4000 MS.
 Discussion: Chromatography achieved within 3 min using a mobile phase containing acetonitrile and 10 mM ammonium formate buffer in a ratio of 70:30 on chromolith C18 analytical column. Q1/Q3 are 130.1/70.1, 136.3/77.1, 462.2/267.2 (with ammonium adduct), and 466.4/267.1 for metformin, metformin D6, canagliflozin, and canagliflozin D4, respectively.
 Conclusion: Rapid, sensitive method for the simultaneous estimation of metformin and canagliflozin in plasma by LC-MS/MS is successfully developed, validated and applied to analyze 960 unknown samples of a bioequivalence study. Incurred sample reanalysis was revealed great reproducibility.

Validation and clinical application of an LC-MS/MS method for the quantification of everolimus using volumetric absorptive microsampling

Everolimus is a mammalian target of rapamycin inhibitor approved for the treatment of various tumor types. Less invasive measurement of everolimus concentrations could facilitate pharmacokinetic studies and personalized dosing based on whole blood concentrations, known as therapeutic drug monitoring.Volumetric Absorptive Microsampling (VAMS) has been introduced as a patient friendly, less invasive sampling technique to obtain an accurate volume of whole blood regardless of hematocrit value. We describe the bioanalytical validation and clinical application of a liquid chromatography tandem mass spectrometry (LC-MS/MS) method to quantify everolimus using VAMS.For the quantification, 13C2D4-Everolimus was used as internal standard (IS). Everolimus and the IS were extracted with methanol from the VAMS device, which was evaporated after ultrasonification and shaking. The residue was reconstituted in 20 mM ammonium formate buffer and methanol (50%, v/v) of which 5 μL was injected into the LC-MS/MS system. Quantification was performed for the ammonium adduct of everolimus in positive electrospray ion mode.The VAMS method met all pre-defined validation criteria. Accuracy and precision were within 11.1% and ≤14.6%, respectively. Samples were shown to be stable on the VAMS device for at least 362 days at ambient temperatures. Considerable biases from −20 to 31% were observed over a 30–50% hematocrit range.Although the method fulfilled all validation criteria, the perceived advantage of VAMS over dried blood spot sampling could not be demonstrated. Despite the effect of hematocrit, using an empirically derived formula the whole blood everolimus concentration could be back calculated with reasonable accuracy in the clinical application study.

Sensitive and robust LC-MS/MS analysis of digoxin in human plasma through optimization of in-source adduct formation.

To develop and validate an LC-MS/MS assay for the quantification of digoxin in human plasma. An LLOQ of 10pg/ml using a 100μl sample was required to support drug-drug interactions studies. Digoxin formed multiple precursor ions in positive and negative ESI and methods based on several of these have been reported previously. After screening viable precursor ions, we found the ammonium adduct gave the best combination of sensitivity and selectivity on our LC-MS/MS platform. Samples were extracted using a simple liquid-liquid procedure. The assay was successfully validation to current EMA guidelines. To the best of our knowledge the developed assay is the most sensitive published to date.

The Impact of the Complexing Cation on the Sensitivity of the Collisional-Induced Dissociation Spectra to Fatty Acid Position for a Set of YXY/YYX-type Triglycerides.

The development of an automated platform for the positional analysis of triglycerides based on electrospray tandem mass spectrometry continues to be pursued. This work compares the positional sensitivities of the collisional-induced dissociation spectra for a representative set of YXY/YYX triglycerides using ammonium, silver, sodium and lithium as complexing agents. A set of triglycerides were synthesized and analyzed by electrospray tandem mass spectrometry using an ion trap mass spectrometer. Using different salt additives, the product ion spectra of the corresponding parent ions for twelve systems of the form YXY/YYX, where Y and X represent C16:0 , C18:1(c-9), C18:2(cc-9,12) and C20:4(cccc-5,8,11,14) , were collected. The data was used to prepare two-point calibration plots for each of the twelve positional isomer systems using each of the four complexing agents. The positional sensitivities for all twelve positional isomer systems were robust for both the sodium and lithium TAG adducts. The CID data for both the sodium and lithium TAG adducts are much less sensitive to the degree of unsaturation and double bond position of the fatty acids constituents than the CID data for the ammonium adducts. Using sodium or lithium TAG adducts may be advantageous for the development of an accurate predictive model for performing positional analysis of complex TAG mixtures based on electrospray tandem mass spectrometry. Ammonium adducts are likely complicated by the ability of the ammonium ion to provide extra stability to some parent ions through hydrogen bond-like interactions.

Identification of organic hydroperoxides and peroxy acids using atmospheric pressure chemical ionization–tandem mass spectrometry (APCI-MS/MS): application to secondary organic aerosol

Abstract. Molecules with hydroperoxide functional groups are of extreme importance to both the atmospheric and biological chemistry fields. In this work, an analytical method is presented for the identification of organic hydroperoxides and peroxy acids (ROOH) by direct infusion of liquid samples into a positive-ion atmospheric pressure chemical ionization–tandem mass spectrometer ((+)-APCI-MS/MS). Under collisional dissociation conditions, a characteristic neutral loss of 51 Da (arising from loss of H2O2+NH3) from ammonium adducts of the molecular ions ([M + NH4]+) is observed for ROOH standards (i.e. cumene hydroperoxide, isoprene-4-hydroxy-3-hydroperoxide (ISOPOOH), tert-butyl hydroperoxide, 2-butanone peroxide and peracetic acid), as well as the ROOH formed from the reactions of H2O2 with aldehydes (i.e. acetaldehyde, hexanal, glyoxal and methylglyoxal). This new ROOH detection method was applied to methanol extracts of secondary organic aerosol (SOA) material generated from ozonolysis of α-pinene, indicating a number of ROOH molecules in the SOA material. While the full-scan mass spectrum of SOA demonstrates the presence of monomers (m∕z = 80–250), dimers (m∕z = 250–450) and trimers (m∕z = 450–600), the neutral loss scan shows that the ROOH products all have masses less than 300 Da, indicating that ROOH molecules may not contribute significantly to the SOA oligomeric content. We anticipate this method could also be applied to biological systems with considerable value.

Effective mobility as a robust criterion for compound annotation and identification in metabolomics: Toward a mobility-based library

Capillary electrophoresis (CE) presents many advantageous features as an analytical technique in metabolomics, such as very low consumption of a sample or the possibility to easily detect very polar and ionizable compounds. However, CE remains an approach only used by a few research groups due to a relatively lower sensitivity and, higher analysis time compared to liquid chromatography. To circumvent these drawbacks, herein we propose a generic CE–mass spectrometry (MS) approach using positive electrospray ionization mode and performing normal- and reverse-polarity CE separations to analyze anionic and acidic compounds. Preliminary experiments showed better sensitivity using the ESI positive mode compared to the ESI negative mode on a set of representative anionic compounds from different biochemical families. This approach was applied to the investigation of an available library of metabolites. More than 450 compounds out of the 596 in the library were detected, with the possibility to monitor negatively ionizable compounds through their ammonium adducts. Migration time of each data point was converted to an effective mobility (μeff) scale and used for peak alignment in data pre-processing; μeff features were used as a robust migration index for peak annotation and identification criterion. For the first time, a large database based on experimental μeff was built, allowing for the straightforward annotation of detected features in biological samples and demonstrating how CE-MS can complement other analytical techniques commonly used in metabolomics.

Bioanalysis of sulprostone, a prostaglandin E2 analogue and selective EP3 agonist, in monkey plasma by liquid chromatography-tandem mass spectrometry

Sulprostone is a potent prostaglandin E2 (PGE2) analogue and one of the first identified selective G-protein-coupled receptor 3 (EP3) agonists. It has been investigated as a potential antiulcer agent and frequently used in the research of EP3 antagonist. To assist pharmacokinetic and pharmacodynamic studies, a rapid and sensitive LC-MS/MS method was developed and qualified for the quantitation of sulprostone in monkey plasma. Using electrospray ionization mass spectrometry, an ammonium adduct in positive mode was chosen for analysis which had seven times of the sensitivity of the depronated ion in negative mode. Latanoprost, a prostaglandin F2α analogue, was used as the internal standard while good sensitivity and chromatography were obtained on a 2.6 μm core-shell column with pentafluorophenyl stationary phase. An assay dynamic range of 2 to 4000 ng/mL was achieved with a sample volume of 25 μL plasma on a Sciex API4000 instrument with simple protein precipitation. Several esterase inhibitors including sodium fluoride (NaF), phenylmethanesulfonyl fluoride (PMSF), diisopropylfluorophosphate (DFP), paraoxon and dichlorvos as well as wet ice conditions were explored for the stabilization of sulprostone in monkey plasma. The developed method was successfully applied for the evaluation of pharmacokinetics of sulprostone after intravenous administration of 0.5 mg/kg to cynomolgus monkey.

Shotgun Analysis of Diacylglycerols Enabled by Thiol-ene Click Chemistry.

Diacylglycerols (DAGs) are a subclass of neutral lipids actively involved in cell signaling and metabolism. Alteration in DAG metabolism has been associated with onset and progression of several human-related diseases. The structural diversity of DAGs and their low concentrations in biological samples call for the development of methods that are capable of sensitive identification and quantitation of each DAG species as well as rapid profiling when a biochemical pathway is perturbed. In this work, the thiol-ene click chemistry has been employed to introduce a charge-tag, namely, cysteamine (CA), at a carbon-carbon double bond (C═C) of unsaturated DAGs. This one-pot photochemical derivatization is fast (within 1 min), universal (monotagging) for DAGs varying in fatty acyl chain lengths and the number of C═Cs, and suitable for small sample volume (e.g., 1-50 μL plasma). Because of the presence of the amine group in CA, tagged DAGs showed at least 10 times increase in response to electrospray ionization as compared to conventional ammonium adduct formation. Low-energy collision-induced dissociation of CA tagged DAGs allowed confident assignment of fatty acyl composition. A neutral loss scan based on characteristic 95 Da loss (a combined loss of CA and H2O) of tagged DAGs has been established as a sensitive means for unsaturated DAG detection (limit of detection = 100 pM) and quantitation from mixtures. The analytical utility of CA tagging was demonstrated by shotgun analysis of unsaturated DAGs in human plasma, including samples from type 2 diabetes mellitus patients.

Fragmentation patterns involving ammonium adduct fragment ions: A comparison of the determination of metaldehyde in human blood by HPLC-QqQ-MS/MS and UHPLC-Q-TOF-MS

This paper presents a rapid, sensitive and precise method for the determination of metaldehyde in human blood, using ultra-performance liquid chromatography coupled with quadrupole time-of-flight tandem mass spectrometry and high-performance liquid chromatography coupled with triple quadrupole tandem mass spectrometry. Separation was performed with a Poroshell 120 EC-C18 column; 2.7 μm atrazine‑d5 (IS) and 200 mg NaCl were added to the blood sample. Proteins in human blood were precipitated using acetonitrile; the supernatant was then analyzed with the UHPLC-Q-TOF-MS or HPLC-QqQ-MS/MS system. The results of selectivity, linearity, accuracy, precision, limits of quantification, recovery, and matrix effects were sufficient to enable the measurement of metaldehyde in human blood samples. In addition, we proposed a fragmentation pathway involving ammonium adduct fragment ions for metaldehyde.

Correction: Characterization of hydroxypropyl-beta-cyclodextrins used in the treatment of Niemann-Pick Disease type C1.

[This corrects the article DOI: 10.1371/journal.pone.0175478.].

Adduction of ammonium to polylactides to modify their dissociation behavior in collision-induced dissociation.

The goal of this work was to modify the dissociation pathways of polylactide (PLA) holding benzyl and hydroxyl terminations, in order to circumvent coincidence of product ions generated during collisional activation of sodiated chains, which prevented their reliable characterization. Benzyl-, hydroxyl-terminated PLAs were ionized as ammonium adducts in positive ion mode electrospray and subjected to collision-induced dissociation (CID). Tandem mass spectrometry (MS/MS) experiments were conducted in a quadrupole time-of-flight (QTOF) instrument for safe assignment of product ions based on their elemental composition derived from accurate mass measurements. Adduction of ammonium to PLAs was found to induce chain fragmentation via charge-assisted processes, in great contrast to the charge-remote mechanisms experienced by sodiated molecules. The main reaction produced ions containing the ω termination only, hence allowing straightforward end-group determination. Other minor pathways were studied in detail to establish dissociation rules for ammoniated PLAs. Some reactions were found to be end-group specific, highlighting the higher reactivity of ammonium than alkali ion adducts. Changing the usually employed sodium-cationizing agent to ammonium was shown to induce dramatic changes in the CID behavior of PLAs. This was a simple and efficient approach to address issues encountered for end-group analysis of the particular PLA studied here.

Adduct ion-targeted qualitative and quantitative analysis of polyoxypregnanes by ultra-high pressure liquid chromatography coupled with triple quadrupole mass spectrometry

Polyoxypregnane and its glycosides (POPs) are frequently present in plants of Asclepiadaceae family, and have a variety of biological activities. There is a great need to comprehensively profile these phytochemicals and to quantify them for monitoring their contents in the herbs and the biological samples. However, POPs undergo extensive adduct ion formation in ESI-MS, which has posed a challenge for qualitative and quantitative analysis of POPs. In the present study, we took the advantage of such extensive adduct ion formation to investigate the suitability of adduct ion-targeted analysis of POPs. For the qualitative analysis, we firstly demonstrated that the sodium and ammonium adduct ion-targeted product ion scans (PIS) provided adequate MS/MS fragmentations for structural characterization of POPs. Aided with precursor ion (PI) scans, which showed high selectivity and sensitivity and improved peak assignment confidence in conjunction with full scan (FS), the informative adduct ion-targeted PIS enabled rapid POPs profiling. For the quantification, we used formic acid rather than ammonium acetate as an additive in the mobile phase to avoid simultaneous formation of sodium and ammonium adduct ions, and greatly improved reproducibility of MS response of POPs. By monitoring the solely formed sodium adduct ions [M+Na]+, a method for simultaneous quantification of 25 POPs in the dynamic multiple reaction monitoring mode was then developed and validated. Finally, the aforementioned methods were applied to qualitative and quantitative analysis of POPs in the extract of a traditional Chinses medicinal herb, Marsdenia tenacissima (Roxb.) Wight et Arn., and in the plasma obtained from the rats treated with this herb. The results demonstrated that adduct ion formation could be optimized for the qualitative and quantitative analysis of POPs, and our developed PI/FS-PIS scanning and sole [M+Na]+ ion monitoring significantly improved the analysis of POPs in both herbal and biological samples. This study also provides implications for the analysis of other compounds which undergo extensive adduct ion formation in ESI–MS.