Amine-functionalized Silica Nanoparticles Research Articles

Systemic Codelivery of Thymoquinone and Doxorubicin by Targeted Mesoporous Silica Nanoparticle Sensitizes Doxorubicin-Resistant Breast Cancer by Interfering between the MDR1/P-gp and miR 298 Crosstalk.

Multi drug resistance (MDR) in breast carcinoma still poses a significant impairment to successful chemotherapy. As the arsenal of anticancer agents increases with improved preclinical methods, the growth of therapeutic drug combinations is now unprecedented. The malignancies addressed by mono drugs often fail to limit cancer progression, resulting in resistant cancer, thereby offering combinatorial therapies a terrific edge over monodrug regimes. However, the selection of drug combinations required enough preliminary evidence for their synergistic effect. The fundamental mechanisms of MDR to chemotherapeutics are associated with the overexpression of membrane efflux pumps, alternations in drug targets, and increased drug metabolism. Unfortunately, it is very difficult for drugs to overcome resistance produced on their own or by another different drug action. In this context, herein, we report a simple delivery system for coencapsulation and intracellular codelivery of dual-drug thymoquinone (TQ) and doxorubicin (DOX) to resensitize DOX-resistant MDA MB231 cell line (231 R). The 231 R cell line developed in our lab showed an enhanced expression of the ATP-binding cassette (ABC) transporters P-gp1/MDR-1 and a declined miR-298 expression. The present delivery system is based on amine-functionalized mesoporous silica nanoparticles (MSNs), in which the side chain amine functional group was used to react with the carbonyl group of TQ, which acts as a pro-drug system (TQ-MSN) to release TQ and DOX simultaneously. DOX was encapsulated later into the above TQ-MSN by a simple diffusion method. The drugs containing MSNs were further coated with a hyaluronic acid-conjugated PEG-PLGA polymer (HA@TQ-DOX-MSN). This simple nanostrategy interferes with the MDR-1/miR-298 cross-talk, thereby allowing a significant reduction in drug efflux from the cell and highlighting a promising nanotechnology-based combinatorial delivery approach in managing breast cancer chemoresistance.

Amine-functionalized mesoporous silica nanoparticles decorated by silver nanoparticles for delivery of doxorubicin in breast and cervical cancer cells

Nanocarriers have demonstrated promising potential in the delivery of various anticancer drugs and in improving the efficiency of the treatment. In this study, silver nanoparticles (AgNPs) were green-synthesized using the extracts of different parts of the pomegranate plant, including the peel, flower petals, and calyx. To obtain the most efficient extract used for the green synthesis of AgNPs, all three types of synthesized nanoparticles were characterized. Then, (3-Aminopropyl) triethoxysilane-functionalized mesoporous silica nanoparticles (MSNs-APTES) decorated with AgNPs were fabricated via a one-pot green-synthesis method. AgNPs were directly coated on the surface of MSNs-APTES by adding pomegranate extract enriched with a source of reducing agent leading to converting the silver ion to AgNPs. The MSN-APTES-AgNPs (MSNs-AgNPs) have been thoroughly characterized using nanoparticle characterization techniques. In addition, DNA cleavage and hemolysis activities of the synthesized nanoparticles were analyzed, confirming the biocompatibility of synthesized nanoparticles. The Doxorubicin (DOX, as a breast/cervical anti-cancer drug) loading (42.8%) and release profiles were investigated via UV–visible spectroscopy. The fibroblast, breast cancer, and cervical cancer cells’ viability against DOX-loaded nanoparticles were also studied. The results of this high drug loading, uniform shape, and small functionalized nanoparticles demonstrated its great potential for breast and cervical cancer management.

Promotion of Th17 Polarized Immunity via Co-Delivery of Mincle Agonist and Tuberculosis Antigen Using Silica Nanoparticles.

Adjuvants and immunomodulators that effectively drive a Th17-skewed immune response are not part of the standard vaccine toolkit. Vaccine adjuvants and delivery technologies that can induce Th17 or Th1/17 immunity and protection against bacterial pathogens, such as tuberculosis (TB), are urgently needed. Th17-polarized immune response can be induced using agonists that bind and activate C-type lectin receptors (CLRs) such as macrophage inducible C-type lectin (Mincle). A simple but effective strategy was developed for codelivering Mincle agonists with the recombinant Mycobacterium tuberculosis fusion antigen, M72, using tunable silica nanoparticles (SNP). Anionic bare SNP, hydrophobic phenyl-functionalized SNP (P-SNP), and cationic amine-functionalized SNP (A-SNP) of different sizes were coated with three synthetic Mincle agonists, UM-1024, UM-1052, and UM-1098, and evaluated for adjuvant activity in vitro and in vivo. The antigen and adjuvant were coadsorbed onto SNP via electrostatic and hydrophobic interactions, facilitating multivalent display and delivery to antigen presenting cells. The cationic A-SNP showed the highest coloading efficiency for the antigen and adjuvant. In addition, the UM-1098-adsorbed A-SNP formulation demonstrated slow-release kinetics in vitro, excellent stability over 12 months of storage, and strong IL-6 induction from human peripheral blood mononuclear cells. Co-adsorption of UM-1098 and M72 on A-SNP significantly improved antigen-specific humoral and Th17-polarized immune responses in vivo in BALB/c mice relative to the controls. Taken together, A-SNP is a promising platform for codelivery and proper presentation of adjuvants and antigens and provides the basis for their further development as a vaccine delivery platform for immunization against TB or other diseases for which Th17 immunity contributes to protection.

Itaconic Acid Cross-Linked Biomolecule Immobilization Approach on Amine-Functionalized Silica Nanoparticles for Highly Sensitive Enzyme-Linked Immunosorbent Assay (ELISA).

Biomolecule immobilization on nanomaterials is attractive for biosensors since it enables the capture of a higher concentration of bioreceptor units while also serving as a transduction element. The technique could enhance the accuracy, specificity, and sensitivity of the analytical measurements of biomolecules. However, it was found that the limitation in chemically binding biomolecules on nanoparticle surfaces could only cross-link between the C-terminal and N-terminal. Here, we report the facile one-step synthesis of amine-functionalized silica nanoparticles (AFSNPs). (3-Aminopropyl)triethoxysilane was used as a precursor to modify the functional surface of nanoparticles via the Stöber process. The biomolecules were immobilized to the AFSNPs through itaconic acid, a novel cross-linker that binds between the N-terminal and N-terminal and potentially improves proteins and nucleic acid immobilization onto the nanoparticle surface. The newly developed immobilization approach on AFSNPs for biomolecular detection enhanced the efficiency of ELISA, resulting in increased sensitivity. It might also be easily used to identify different pathogens for clinical diagnostics.

Development of amine-functionalized fluorescent silica nanoparticles from coal fly ash as a sustainable source for nanofertilizer

Scaling up the synthesis of fluorescent silica nanoparticles to meet the current demand in diverse applications involves technological limitations. The present study relates to the hydrothermal synthesis of water-soluble, crystalline, blue-emitting amine-functionalized silica nanoparticles from coal fly ash sustainably and economically. This study used tertiary amine (trimethylamine) to prepare amine-functionalized fluorescent silica nanoparticles, enhancing fluorescence quantum yield and nitrogen content for nanofertilizer application. The TEM and FESEM studies show that the silica nanoparticles have a spherical morphology with an average diameter of 4.0 nm. The x-ray photoelectron and Fourier transform infrared spectroscopy studies reveal the presence of the amine group at the surface of silica nanoparticles. The silica nanoparticles exhibit blue fluorescence with an emission maximum of 454 nm at 370 nm excitation and show excitation-dependent emission properties in the aqueous medium. With the perfect spectral overlap between silica nanoparticle emission (donor) and chlorophyll absorption (acceptor), fluorescent silica nanoparticles enhance plant photosynthesis rate by resonance energy transfer. This process accelerates the photosynthesis rate to improve the individual plant’s quality and growth. These findings suggested that the fly ash-derived functionalized silica nanoparticles could be employed as nanofertilizers and novel delivery agents.

Hydrogel Contact Lenses Embedded with Amine-Functionalized Large-Pore Mesoporous Silica Nanoparticles with Extended Hyaluronic Acid Release.

Contact lenses (CLs) have emerged as an effective method for delivering ophthalmic drugs. In this research, we designed hydrogel CLs capable of extended release, utilizing large-pore mesoporous silica nanoparticles (LPMSNs) to deliver hyaluronic acid (HA) for treating dry eye syndrome. LPMSNs were functionalized with amine groups (LPMSN-amine) to enhance HA loading and release capacity. In vitro release studies demonstrated that LPMSN-amine CLs exhibited superior slower HA release than LPMSN-siloxane and standard CLs. Within 120 h, the cumulative amount of HA released from LPMSN-amine CLs reached approximately 275.58 µg, marking a 12.6-fold improvement compared to standard CLs, when loaded from 0.1 wt% HA solutions. Furthermore, LPMSN-amine CLs effectively maintained moisture, mitigating ocular surface dehydration, making them a promising solution for dry eye management. This study successfully developed LPMSN-amine CLs for extended HA release, identifying the optimal functional groups and loading conditions to achieve sustained release.

Size variations of mesoporous silica nanoparticle control uptake efficiency and delivery of AC2-derived dsRNA for protection against tomato leaf curl New Delhi virus.

We report the size dependent uptake of dsRNA loaded MSNPs into the leaves and roots of Nicotiana benthamiana plants and accessed for their relative reduction in Tomato leaf curl New Delhi viral load. A non-GMO method of RNA interference (RNAi) has been recently in practice through direct delivery of double stranded RNA into the plant cells. Tomato leaf curl New Delhi virus (ToLCNDV), a bipartitie begomovirus, is a significant viral pathogen of many crops in the Indian subcontinent. Conventional RNAi cargo delivery strategies for instance uses viral vectors and Agrobacterium-facilitated delivery, exhibiting specific host responses from the plant system. In the present study, we synthesized three different sizes of amine-functionalized mesoporous silica nanoparticles (amino-MSNPs) to mediate the delivery of dsRNA derived from the AC2 (dsAC2) gene of ToLCNDV and showed that these dsRNA loaded nanoparticles enabled effective reduction in viral load. Furthermore, we demonstrate that amino-MSNPs protected the dsRNA molecules from nuclease degradation, while the complex was efficiently taken up by the leaves and roots of Nicotiana benthamiana. The real time gene expression evaluation showed that plants treated with nanoparticles of different sizes ~ 10nm (MSNPDEA), ~ 32nm (MSNPTEA) and ~ 66nm (MSNPNH3) showed five-, eleven- and threefold reduction of ToLCNDV in N. benthamiana, respectively compared to the plants treated with naked dsRNA. This work clearly demonstrates the size dependent internalization of amino-MSNPs and relative efficacy in transporting dsRNA into the plant system, which will be useful in convenient topical treatment to protect plants against their pathogens including viruses. Mesoporous silica nanoparticles loaded with FITC, checked for its uptake into Nicotiana benthamiana.

PCL/gelatin nanofibers embedded with doxorubicin-loaded mesoporous silica nanoparticles/silver nanoparticles as an antibacterial and anti-melanoma cancer

Melanoma cancer wound healing is critical and complex and poses a significant challenge to researchers. Drug resistance, adverse side effects, and inefficient localization of chemotherapeutic drugs limit common treatment strategies in melanoma cancer. Using drug delivery nanostructures with low side effects and high efficiency, besides having antibacterial and antiseptic properties, can effectively repair the damage caused by the disease. To this end, this study aimed to develop a drug delivery nanosystem based on doxorubicin (DOX)-loaded amine-functionalized mesoporous silica nanoparticles (MSNs), linked with green synthesized silver nanoparticles (AgNPs). Characterization methods including microscopic methods and X-ray diffraction (XRD) confirmed the synthesis and functionalization of the well-dispersed nanoparticles with nanosized and uniform structures. The poly(ε-caprolactone) (PCL) nanofibers as a strong scaffold were produced by the blow spinning method and DOX-loaded nanoparticles were blow spun on PCL nanofibers along with gelatin solution. The resulting nanosystem including nanofibers and nanoparticles (NFs/NPS) showed a fine loading percent with a proper release profile of DOX and AgNPs and low hemolysis activity. Moreover, besides preventing infection by AgNPs, the DOX-loaded NFs/NPs could effectively destroy melanoma cancer cells. The attachment of normal cells to the nanoparticles-loaded nanofibers scaffold revealed the possibility of healing wounds caused by melanoma cancer.

Nanocomposite Hydrogels with Polymer Grafted Silica Nanoparticles, Using Glucose Oxidase.

Nanocomposite hydrogels offer remarkable potential for applications in bone tissue engineering. They are synthesized through the chemical or physical crosslinking of polymers and nanomaterials, allowing for the enhancement of their behaviour by modifying the properties and compositions of the nanomaterials involved. However, their mechanical properties require further enhancement to meet the demands of bone tissue engineering. Here, we present an approach to improve the mechanical properties of nanocomposite hydrogels by incorporating polymer grafted silica nanoparticles into a double network inspired hydrogel (gSNP Gels). The gSNP Gels were synthesised via a graft polymerization process using a redox initiator. gSNP Gels were formed by grafting 2-acrylamido-2-methylpropanesulfonic acid (AMPS) as the first network gel followed by a sequential second network acrylamide (AAm) onto amine functionalized silica nanoparticles (ASNPs). We utilized glucose oxidase (GOx) to create an oxygen-free atmosphere during polymerization, resulting in higher polymer conversion compared to argon degassing. The gSNP Gels showed excellent compressive strengths of 13.9 ± 5.5 MPa, a strain of 69.6 ± 6.4%, and a water content of 63.4% ± 1.8. The synthesis technique demonstrates a promising approach to enhance the mechanical properties of hydrogels, which can have significant implications for bone tissue engineering and other soft tissue applications.

Biodegradable Dual-Function Nanocomposite Hydrogels for Prevention of Bisphosphonate-Related Osteonecrosis of the Jaw.

This study presents the development of composite hydrogels, comprising a biodegradable polymer (carboxymethyl chitosan (CMCS or CM)) and a mixture of plasma-treated mesoporous silica nanoparticles (PMCM-41 or PM) and amine-functionalized mesoporous silica nanoparticles (NMCM-41 or NM), coloaded with a hydrophilic antibiotic (clindamycin hydrochloride (CDM or C)) and a poorly water-soluble compound (geranylgeraniol (GGOH or G)) for prevention of bisphosphonate-related osteonecrosis of the jaw (BRONJ). The CG-loaded hydrogel stabilities were better maintained when CDM-preloaded PMCM-41 and NMCM-41 were initially used and governed by weight ratios of CDM-loaded PMCM-41 to NMCM-41 and CDM quantity utilized. 5PM240C-1NM-CM demonstrated the best CDM-loaded hydrogel for GGOH postloading. The scanning electron microscopy (SEM) and X-ray microcomputer-tomography (μCT) images of 5PM240C-1NM-CM revealed a porous structure with homogeneously distributed nanoparticles. Two GGOH-loaded 5PM240C-1NM-CM hydrogels were generated after GGOH loadings. Their biphasic drug release profiles were fitted by Ritger-Peppas and Hixson-Crowell models. The copresence of GGOH could hinder CDM releases, while GGOH was released with a slower rate. The hydrogels prolonged the CDM and GGOH releases up to 9 days. They possessed antibacterial activities against Streptococcus sanguinis for up to 14 days and satisfactorily provided good cytoprotection against zoledronic acid for osteoclastic and osteoblastic progenitors, thus preserving a pool of viable progenitor cells that had the capacity to differentiate into mature osteoclasts and osteoblasts in vitro, suggesting their potential local application for prevention of BRONJ.

Electrospun amine-functionalized silica nanoparticles–cellulose acetate nanofiber membranes for effective removal of hardness and heavy metals (As(v), Cd(ii),Pb(ii)) in drinking water sources

This study reports an efficient and convenient method for removal of water hardness and heavy metals using amine-functionalized silica nanoparticle incorporated cellulose acetate electrospun nanofiber membranes.

Double-Network Hydrogels Reinforced with Covalently Bonded Silica Nanoparticles via 1-Ethyl-3-(3-dimethylaminopropyl)carbodiimide Chemistry.

Hydrogels have progressed from single-network materials with low mechanical integrity to double-network hydrogels (DNHGs) with tough, tunable properties. In this work, we introduce a nanocomposite structure into the first network of a DNHG. Amine-functionalized silica nanoparticles (ASNPs) were covalently cross-linked by forming amide bonds through the carboxylic groups of polyacrylic acid (PAAc) in the first network. DNHGs with varying sizes of ASNPs (50, 100, and 150 nm) and varying concentrations (2.5, 10, 20, and 40 wt %) were explored and compared to a control without a nanocomposite structure. Compressive strengths improved from 0.10 MPa for the control to a maximum of 1.28 MPa for the PAAc/PAAm DNHGs. All hydrogels experienced increased resistance to strain with a maximum of 74% compared to 45% for the control. SEM images of freeze-dried gels showed that ASNPs were integrated into the gel mesh. Nanoparticle retention was calculated using thermal gravimetric analysis (TGA) with improved retention values for larger ASNPs. New DNHG composites have been formed with improved mechanical properties and a potential use in tissue engineering and biomaterial applications.

Amine-functionalized and non-functionalized mesoporous silica nanoparticles as the delivery system for tertiary butylhydroquinone (TBHQ)

Amine-functionalized and non-functionalized mesoporous silica nanoparticles as the delivery system for tertiary butylhydroquinone (TBHQ)

In Vitro Efficacy of Curcumin-Loaded Amine-Functionalized Mesoporous Silica Nanoparticles against MCF-7 Breast Cancer Cells.

Purpose: Mesoporous silica nanoparticles (MSNs) have drawn substantial interest as drug nanocarriers for breast cancer therapy. Nevertheless, because of the hydrophilic surfaces, the loading of well-known hydrophobic polyphenol anticancer agent curcumin (Curc) into MSNs is usually very low. Methods: For this purpose, Curc molecules were loaded into amine-functionalized MSNs (MSNs-NH2 -Curc) and characterized using thermal gravimetric analysis (TGA), Fourier-transform infrared (FTIR), field emission scanning electron microscope (FE-SEM), transmission electron microscope (TEM), Brunauer-Emmett-Teller (BET). MTT assay and confocal microscopy, respectively, were used to determine the cytotoxicity and cellular uptake of the MSNs-NH2 - Curc in the MCF-7 breast cancer cells. Besides, the expression levels of apoptotic genes were evaluated via quantitative polymerase chain reaction (qPCR) and western blot. Results: It was revealed that MSNs-NH2 possessed high values of drug loading efficiency and exhibited slow and sustained drug release compared to bare MSNs. According to the MTT findings, while the MSNs-NH2 -Curc were nontoxic to the human non-tumorigenic MCF-10A cells at low concentrations, it could considerably decrease the viability of MCF-7 breast cancer cells compared to the free Curc in all concentrations after 24, 48 and 72 hours exposure times. A cellular uptake study using confocal fluorescence microscopy confirmed the higher cytotoxicity of MSNs-NH2 -Curc in MCF-7 cells. Further, it was found that the MSNs-NH2 -Curc could drastically affect the mRNA and protein levels of Bax, Bcl-2, caspase 3, caspase 9, and hTERT relative to the free Curc treatment. Conclusion: Taken together, these preliminary results suggest the amine-functionalized MSNs-based drug delivery platform as a promising alternative approach for Curc loading and safe breast cancer treatment.

A polymeric suspension of amine functionalized silica nanoparticles derived from Moonj grass for the carbon capture and storage applications

Herewith, amine functionalization of low cost support from a novel and sustainable source has been entrenched to improve the carbon dioxide (CO2) capture efficiency. The support used is silica nanoparticles (SNPs), derived from a commonly available weed grass namely, Moonj (Saccharum munja L.). The amine functionality was anchored over the SNPs’s surface to obtain amine-functionalized SNPs (AFSNPs) using one step process. The SNPs and AFSNPs were characterized with FTIR, XRD, SEM, TEM, and BET to confirm the structural and textural properties. Subsequently, AFSNPs were suspended in a polymeric solution of 1000 ppm hydrolyzed polyacrylamide (HPAM) forming an AFSNP-HPAM nano-fluid. The nano-fluid remained stable for over 21 days and no sign of sedimentation was observed. Increasing the AFSNPs’s concentration in the nano-fluid increased the viscosity of the nano-fluid while increasing the amine loading over SNPs did not much affect the base viscosity. The nano-fluid showed improved CO2 absorption property for AFSNPs over SNPs. This improved CO2 absorption property can be attributed to the synergy between polymer and AFSNPs. The inclusion of the AFSNPs in the polymer matrix also enhanced thermal stability of polymer at high temperatures. Thus, the utilization of these AFSNPs is proposed in subsurface applications for effective carbon utilization and storage.

Layer-by-layer assembly of nanofilms from colloidally stable amine-functionalized silica nanoparticles

The assembly of uniform thin films with functional silica nanoparticles (FSNPs) by the layer-by-layer (LbL) technique has been studied to provide rough, robust, and functional surfaces. Initially, monodisperse silica nanoparticles (SNPs) have been synthesized by the reverse microemulsion method. Then SNPs have been functionalized using amino silane coupling agents with various chain lengths and amine positions such as (3-aminopropyl)trimethoxy silane (APS), N-[3-(trimethoxysilyl)propyl]-N,N,N-trimethylammonium chloride (NPC), N -(6-aminohexyl)aminopropyltrimethoxy silane (AHAPS), and 3-aminopropyl(dimethyl)ethoxy silane (APDMES). The amine-functionalized silica nanoparticles have been characterized using zeta potential, Fourier Transform-Infrared Spectroscopy (FT-IR), and 1 H Nuclear Magnetic Resonance (NMR) spectroscopy to prove the existence of amine groups on the silica surface. Scanning electron microscopy (SEM) images have revealed that the LbL assembled thin film coatings of FSNPs are uniform and monodisperse. The thickness measurements of the coatings have been conducted by spectroscopic ellipsometry. Water contact angle measurements were performed to analyze the alteration of surface features with functional groups. The roughness, topography, and elastic modulus of the assembled thin-film coatings were probed by atomic force microscopy (AFM). The dispersion of AHAPS-FSNPs has indicated superior colloidal stability than other FSNPs because of their secondary amines creating steric hindrance. Moreover, AHAPS-FSNPs film exhibited the lowest coating thickness and the highest elastic modulus comparing with the other FSNPS because of their crosslinking and hydrogen-bonding ability. Briefly, in this work, LbL assembly of the amine FSNPs was established by an extensive investigation to form rough and functional surfaces for many demanding applications.

CO2 adsorption capacities of amine-functionalized microporous silica nanoparticles

Efforts on CO2 capture have intensified as climate change compromises ecosystems and biodiversity. Therefore, it is crucial to develop different methods for CO2 sequestration to improve solid sorbent capabilities (NPs). To this end, the surface of 200-nm silica nanoparticles (SiO2NPs) was covalently anchored with aminated ligands, 3-aminopropyltriethoxysilane (APTES), poly(amidoamine) dendrimers (PAMAM) and a short peptide comprising two lysine units, aiming for CO2 adsorption over a wide range of pressures. Our goal was to explore the influence of functional chemical groups (attached to the SiO2NPs) on CO2 sequestration. The observed results showed that at low and high CO2 gas pressure conditions, typical APTES functionalized SiO2Np surpassed the CO2 adsorption capacities of dendritic and peptide-based nanoparticles bearing amine-polymer functionalities, a remarkable effect that was investigated in this work. In addition, a convenient and facile method to decorate and quantify SiO2 nanoparticles with PAMAM and a short peptide is reported.

Nanoparticle-stabilized encapsulation of borneol and citral: Physicochemical characteristics, storage stability, and enhanced antibacterial activities.

Combinations of phytochemical(s) and engineered nanoparticles have attracted immense research interest due to their superior antimicrobial effects against contaminations. Herein, a Pickering emulsion is developed with capsulized phytochemicals including borneol and citral (BC-Cap) stabilized by hydrophilic amine-functionalized silica nanoparticles (SiO2 ─NH2 NPs). The droplet sizes of Pickering emulsion were 5.2 ± 1.4 µm under the condition that the concentrations of SiO2 ─NH2 NPs ranged from 0.6 to 1.2 wt.%, and the emulsion showed desirable stability during storage at 40°C for 365 days. In addition, the antibacterial and antibiofilm activities of the Pickering emulsion were investigated. The antibacterial effect of BC-Cap increased by two- to fourfold compared with citral or borneol alone. Treatment of BC/BC-Cap for 4 h eliminated the formation of biofilms generated by Listeria monocytogenes (at 5/1.25 mg/ml; 2 × MIC concentration) and Pseudomonas aeruginosa (at 5/2.5 mg/ml; 2 × MIC concentration). Further mechanistic studies revealed that the antibiofilm effects of BC-Cap were attributed to its ability to increase the porosity and lytic effects on the cell membrane of bacteria. Findings from the current study support the antibacterial and antibiofilm effects of BC-Cap Pickering emulsion as a promising food additive. PRACTICAL APPLICATION: The Pickering emulsion has potential applications as bacteriostatic agent in packaging materials and general surface disinfectant. The combination of borneol and citral is stabilized by hydrophilic amine-functionalized silica nanoparticles (SiO2 ─NH2 NPs). With the synergistic effects of borneol and citral, the Pickering emulsion shows a promising elimination effect against the formation of biofilms produced by Listeria monocytogenes and Pseudomonas aeruginosa.

Antimicrobial action of mesoporous silica nanoparticles loaded with cefepime and meropenem separately against multidrug-resistant (MDR) Acinetobacter baumannii

The extensive use of antibiotics drives the evolution of drug resistance in pathogenic bacteria clearly. Multidrug-resistance (MDR) is being a major challenge in world public health and A. baumannii is becoming an increasingly important human pathogen due to the emergence of MDR strains. In this study, amine-functionalized mesoporous silica nanoparticles (MSN-NH2) was synthesized and loaded by cefepime (CEF) and meropenem (MEP) as antibiotic drugs. The results showed a high loading efficiency of the CEF and MEP into MSN-NH2 (MSN–NH2–CEF and MSN–NH2–MEP). The prepared nanoparticles were fully characterized by Scanning Electron Microscopy (SEM), nitrogen adsorption/desorption isotherms, Fourier Transform Infrared (FT-IR) spectroscopy, and X-ray Diffraction (XRD) spectroscopy. In order to determine the antibacterial action of MSN–NH2–CEF and MSN–NH2–MEP against MDR A. baumannii, the broth microdilution and well diffusion method were used. The antimicrobial test results against MDR A. baumannii isolate were showed that drug-loaded MSN-NH2 more effective than the free drug. The results of the present study demonstrated that MSN–NH2–CEF and MSN–NH2–MEP potentiate antimicrobial activity than free drugs and enhanced the possibility of combat against A. baumannii isolate.

Metals and Antibiotics as Aqueous Sequestration Targets for Magnetic Polyamidoamine-Grafted SBA-15.

In this study, a magnetic generation-5 polyamidoamine (G-5 PAMAM) dendrimer-functionalized SBA-15 (mPSBA) composite was synthesized by coupling amine-functionalized silica (SBA-15-NH2) and amine-functionalized magnetic nanoparticles (MNP-NH2) with the G-5 PAMAM, before characterization and aqueous sorption of As(III), Cd(II), tetracycline, and ciprofloxacin using the composite. The mPSBA characterization data exhibited the typical Si-O-Si infrared peaks from the SBA-15 backbone in addition to the acquired characteristic infrared Fe-O and amide-I/II peaks from the MNP and G-5 PAMAM dendrimers, respectively. Postsorption infrared spectra showing shifts for the amide-linked groups indicated the likely points of contaminant attachment on the composite. Its thermal stability was lower than that of SBA-15 but higher than that of SBA-15-NH, while the XRD diffractograms of the backbone SBA-15-NH and MNP were unchanged in the final composite. The mPSBA composite was a better As(III) and Cd(II) adsorbent than SBA-15 by ≈400 and 140%, respectively, with rapid uptake in the first 60 min and equilibrium achieved at 120 min. Sorption was enhanced with increasing pH (until pHpzc) and initial contaminant concentration. The process was spontaneous and endothermic; thus, increasing ambient temperature enhanced Cd(II) sorption. The sorption data fitted better to the homogeneous fractal pseudo-second-order (FPSO) kinetics model and the Brouers-Sotolongo fractal adsorption isotherm models, indicating complex sorption interactions and pore-filling/contaminant trapping within mPSBA. Further experiments using mPSBA for the uptake of tetracycline and ciprofloxacin showed 679% and 325% higher sorption, respectively, compared with that for SBA-15-NH. In addition to the added advantage of easy removal from solution/treated water after the adsorption process, mPSBA sorption capacities for these studied contaminants [As(III): 23.3 mg/g; Cd(II): 74.5 mg/g; tetracycline: 38.4 mg/g; ciprofloxacin: 23.0 mg/g] are better than those of several advanced adsorbents reported in the literature.