Amide Groups Research Articles

Construction of coal pitch-based HA-K grafted poly condensates and their excellent anti-temperature and viscosity-reducing properties

Humic acids (HAs) are widely used as filtrate and viscosity reducers in drilling fluids. However, their practical utility is limited due to poor stability in salt resistance and high-temperature resistance. High-temperature coal pitch (CP) is a by-product from coal pyrolysis above 650 °C. The substance's molecular structure is characterized by a dense arrangement of aromatic hydrocarbon and alkyl substituents. This unique structure gives it unique chemical properties and excellent drilling performance, surpassing traditional humic acids in drilling operations. Potassium humate is prepared from CP (CP-HA-K) by thermal catalysis. A new type of high-quality humic acid temperature-resistant viscosity-reducer (Graft CP-HA-K polymer) is synthesized with CP-HA-K, hydrolyzed polyacrylonitrile sodium salt (Na-HPAN), urea, formaldehyde, phenol and acrylamide (AAM) as raw materials. The experimental results demonstrate that the most favorable conditions for the catalytic preparation of CP-HA-K are 1 wt% catalyst dosage, 30 wt% KOH dosage, a reaction temperature of 250 °C, and a reaction time of 2 h, resulting in a maximum yield of CP-HA-K of 39.58%. The temperature resistance of the Graft CP-HA-K polymer is measured to be 177.39 °C, which is 55.39 °C higher than that of commercial HA-K. This is due to the abundant presence of amide, hydroxyl, and amine functional groups in the Graft CP-HA-K polymer, which increase the length of the carbon chains, enhance the electrostatic repulsion on the surface of solid particles. After being aged to 120 °C for a specified duration, the Graft CP-HA-K polymer demonstrates significantly higher viscosity reduction (42.12%) compared to commercial HA-K (C-HA-K). Furthermore, the Graft CP-HA-K polymer can tolerate a high salt concentration of 8000 mg·L−1, measured after the addition of optimum amount of 3 wt% Graft CP-HA-K polymer. The action mechanism of Graft CP-HA-K polymer on high-temperature drilling fluid is that the Graft CP-HA-K polymer can increase the repulsive force between solid particles and disrupt bentonite's reticulation structure. Overall, this research provides novelty insights into the synthesis of artificial humic acid materials and the development of temperature-resistant viscosity reducers, offering a new avenue for the utilization of CP resources.

Benzofurans as Acetylcholinesterase Inhibitors for Treating Alzheimer's Disease: Synthesis, in vitro Testing, and in silico Analysis.

Alzheimer's disease (AD) is a neurodegenerative disorder and the leading cause of dementia worldwide. It is characterized by a progressive decline in cholinergic neurotransmission. During the development of AD, acetylcholinesterase (AChE) binds to β-amyloid peptides to form amyloid fibrils, which aggregate into plaque deposits. Meanwhile, tau proteins are hyperphosphorylated, forming neurofibrillary tangles (NFTs) that aggregate into inclusions. These complexes are cytotoxic for the brain, causing impairment of memory, attention, and cognition. AChE inhibitors are the main treatment for AD, but their effect is only palliative. This study aimed to design and synthesize novel benzofuran derivatives and evaluate their inhibition of AChE in vitro and in silico. Results: The seven synthesized benzofuran derivatives inhibited AChE in vitro. Benzofurans hydroxy ester 4, amino ester 5, and amido ester (±)-7 had the lowest inhibition constant (Ki) values and displayed good affinity for EeAChE in molecular docking. Six derivatives showed competitive inhibition, while the best compound (5: Ki=36.53 μM) exhibited uncompetitive inhibition. The amino, hydroxyl, amide, and ester groups of the ligands favored interaction with the enzyme by hydrogen bonds. Conclusion: Three benzofurans were promising AChE inhibitors with excellent Ki values. In future research on their their application to AD, 5 will be considered as the base structure.

Thermal Oxidative Aging Effect on Chemo-Rheological and Morphological Evolution of Crumb Rubber Modified Asphalt Binders with Wax-Based Warm Mix Additives

Wax-based warm mix additives can decrease the viscosity and improve the workability of crumb rubber (CR)-modified asphalt, but the mechanism of influence on the aging performance of CR-modified asphalt is not clear. To investigate the thermal aging behavior and mechanism of wax-based warm mix CR-modified asphalt, polyethylene wax (PEW) and polyamide wax (PAW) were mixed to prepare warm mix CR-modified asphalt. The effect of thermal aging on the rheological and mechanical properties was characterized by a basic property test, frequency sweep test, and multiple stress creep recovery test. The chemical composition changes during aging were then analyzed by Fourier transform infrared spectroscopy and gel permeation chromatography. Finally, the phase morphology during thermal aging was observed by fluorescence microscopy. The results showed that compared with the degradation of CR, the oxidative aging of the asphalt binder played a dominant role in the process. Not only did PEW and PAW attach to the asphalt surface in the form of crystallization to prevent its reaction with oxygen but they also promoted the dissolution of CR, and released polymerization chains, thereby enhancing the antiaging properties of CR-modified asphalt. Furthermore, the antiaging of PAW/CR-modified asphalt was better than that of PEW/CR-modified asphalt, because the amide group of PAW reacted with CR-modified asphalt to form a polymer structure.

Insight into the drying-mediated and thioether bond activated chiral inversion assembly of nano building blocks

Supramolecular materials are typically obtained from a solvent environment, while the assembled nano-structures always affected and unpredictably changed by irreversible evaporation of solvents, which brings great challenges for the precise controlling of assembled structures. Herein, a drying-mediated and thioether bond activated chiral inversion assembly behavior of organic/inorganic nano-building blocks polyhedral oligomeric silsesquioxane (POSS) was investigated. The POSS was modified by eight methylated terminal cysteine, while the existence of thioether bond could capture the hydrogen bonds belonging to amide groups during drying process, resulting in weaken of the inter-molecular hydrogen bonds and displacing the stacking of the nano-building blocks, which activates the forming of super-helical structures opposite to the original chirality. This research reveals the solvent-induced chiral assembly principle of the giant molecules and helpful for the construction of the precise architecture.

Amide-functionalized g-C3N4 nanosheet for the adsorption of arsenite (As3+): Process optimization, experimental, and density functional theory insight

Long-term exposure to arsenite (As3+) from water resources poses a global health concern. In the current study, g-C3N4 (C3N4) nanosheets were functionalized with amide groups to increase their adsorption capacity to remove As3+ from aqueous environments. Experimental assessments and density functional theory (DFT) calculations have been utilized to explore the adsorption characteristics of As3+ on C3N4 and amide-functionalized C3N4 (AC3N4) nanosheets. The central composite design (CCD) method unveiled the optimal operating conditions, including a pH level of 6.5, an adsorbent mass of 0.12 g, and an As3+ initial concentration of 250 mg/L. The AC3N4 nanosheet showed a higher adsorption capacity (205.8 mg/g) than the pristine C3N4 nanosheet (27.7 mg/g). The experimental data demonstrated conformity with the Freundlich isotherm in the adsorption study. DFT calculations revealed that the As3+/AC3N4 complex exhibited a higher adsorption energy (-40.98 eV) and stronger covalent bonds than the As3+/C3N4 complex (28.34 eV). The outstanding adsorptive properties of AC3N4 present it as an effective adsorbent for eliminating heavy metal ions from water, highlighting its capability for environmental remediation.

Novel Binder with Cross-Linking Reconfiguration Functionality for Silicon Anodes of Lithium-Ion Batteries.

Silicon is expected to be used as a high theoretical capacity anode material in lithium-ion batteries with high energy densities. However, the huge volume change incurred when silicon de-embeds lithium ions, leading to destruction of the electrode structure and a rapid reduction in battery capacity. Although binders play a key role in maintaining the stability of the electrode structure, commonly used binders cannot withstand the large volume expansion of the silicon. To alleviate this problem, we propose a PGC cross-linking reconfiguration binder based on poly(acrylic acid) (PAA), gelatin (GN), and β-cyclodextrin (β-CD). Within PGC, PAA supports the main chain and provides a large number of carboxyl groups (-COOH), GN provides rich carboxyl and amide groups that can form a cross-linking network with PAA, and β-CD offers rich hydroxyl groups and a cone-shaped hollow ring structure that can alleviate stress accumulation in the polymer chain by forming a new dynamic cross-linking coordination conformation during stretching. In the half cell, the silicon negative prepared by the PGC binder exhibited a high specific capacity and capacity maintenance ratio, and the specific capacity of the silicon negative electrode prepared by the PGC binder is still 1809 mAh g-1 and the capacity maintenance ratio is 73.76% following 200 cycles at 2 A g-1 current density, indicating that PGC sufficiently maintains the silicon negative structure during the battery cycle. The PGC binder has a simple preparation method and good capacity retention ability, making it a potential reference for the further development of silicon negative electrodes.

Ionic strength and anion‐specificity effects on the interfacial behavior of double hydrophilic block copolymer PNIPAM‐b‐POEGA

AbstractIn our prior paper, surface micelles with the core‐shell‐petal structure of the double hydrophilic block copolymer poly(N‐isopropylacrylamide)‐block‐poly[oligo(ethylene glycol) acrylate] (PNIPAM‐b‐POEGA) were successfully evaluated. In this work, ionic strength (under acidic conditions) and anion‐specificity effects (under neutral conditions) on the aggregation behavior of PNIPAM‐b‐POEGA at the air/water interface and the morphologies of its Langmuir–Blodgett (LB) films were systematically studied. Under acidic conditions, the salting‐out effect prevails over the electrostatic shielding effect, and the amide group shells with a slight protonation degree are covered up by the large POEGA petals. Under neutral conditions, the stretching degrees of POEGA blocks at low/moderate salt concentrations are close. At high salt concentrations, the isotherms gradually shift to large molecular areas in the order of the NaCl, Na2SO4, NaNO3, and NaSCN cases. The hysteresis degrees of the monolayers increase with the increase of salt concentrations due to the gradually increased interfacial stretching degree and compression‐induced underwater solubility of POEGA blocks. All the initial LB films of PNIPAM‐b‐POEGA exhibit isolated circular micelles with small cores. Upon compression, the LB films exhibit slightly large micelles because of the possible coalescence of some neighboring cores.

Methyl N-{(1R)-2-[(meth-oxy-carbon-yl)-oxy]-1-phenyleth-yl}carbamate.

The title mol-ecule, C12H15NO5, is a methyl carbamate derivative obtained by reacting (R)-2-phenyl-glycinol and methyl chloro-formate, with calcium hydroxide as heterogeneous catalyst. Supra-molecular chains are formed in the [100] direction, based on N-H⋯O hydrogen bonds between the amide and carboxyl-ate groups. These chains weakly inter-act in the crystal, and the phenyl rings do not display significant π-π inter-actions.

Synthesis and antihepatoma activity of guaianolide dimers derived from lavandiolide I

Guaianolide dimers represent a unique class of natural products with anticancer activities, but their low content in plants has limited in-depth pharmacological studies. Lavandiolide I is a guaianolide dimer isolated from Artemisia species, and had been synthesized on a ten-gram scale in four steps with 60 % overall yield, which showed potent antihepatoma activity on the HepG2, Huh7, and SK-Hep-1 cell lines with IC50 values of 12.1, 18.4, and 17.6 µM, respectively. To explore more active dimers, 33 lavandiolide I derivatives were designed, synthesized, and evaluated for their inhibitory activity on human hepatoma cell lines. Among them, 10 derivatives were more active than lavandiolide I and sorafenib on the three cell lines. The primary structure–activity relationship concluded that the introduction of aldehyde, ester, azide, amide, carbamate and urea functional groups at C-14′ of the guaianolide dimer significantly enhanced the antihepatoma activity. Among these compounds, derivatives 25, 27, and 33 enhanced antihepatoma activity more than 1.2–5.8 folds than that of lavandiolide I, and demonstrated low toxicity to the human liver cell lines (THLE-2) and good safety profiles with selective index ranging from 1.3 to 3.4, while lavandiolide I was more toxic to THLE-2 cells. This work provides new insights into enhancing the antihepatoma efficacy and reducing the toxicity of sesquiterpenoid dimers.

Mixed ligand 4‑hydroxy acetanilide-febuxostat complexes of Co(II),- Ni(II), Cu(II) and Zr(IV): Synthesis, structural characterization, DFT calculations, antibacterial, antioxidant and molecular docking studies

The synthesized mixed ligand metal complexes were achieved by a combination of febuxostat (2-(3-cyano-4-isobutyloxyphenyl)-4-methyl-5-thiazolecarboxylic acid) (FEB) and paracetamol (4‑hydroxy acetanilide) (Para) together with crucial biologically relevant elements. These elements, including Co(II), Cu(II), Zr(IV), and Ni(II) chlorides, play important roles in various biological systems and mechanisms, such as antioxidant, antimicrobial systems, and contribute to diverse functions and structures. To identify chemical formulae and structures of synthesized complexes, physical-analytical, spectroscopic (XRD, FT-IR, ESR, 13C NMR, 1H NMR, and UV-visible), mass spectrometry (MS), TG-DTG studies were used and supported by computational approaches. FT-IR and 1H NMR data revealed that FEB chelated through sulfur of thiazole ring as a mono-negative bidentate type and deprotonated oxygen of carboxylate group, according to lack of characteristic band at 1677 cm−1 and signal at δ = 13.37 ppm (-OHCOOH), whereas Para chelated through nitrogen and oxygen of amide group as a neutral bidentate ligand. Magnetic moment and electronic spectra data revealed that complexes have an octahedral structure. The optical band gap (Eg) for our compounds was calculated and according to Eg values, all complexes were semi-conductors and fell into the class of solar materials compared with FEB and Para. XRD pattern showed the monoclinic polycrystalline structure for all compounds except the Zr(IV) complex was amorphous. Kinetic parameters of the thermal decomposition stages were calculated. DFT was utilized to confirm bonding mode for FEB and Para with metal ions and according to calculations of energy band gap (ΔE) of complexes, Cu(II) complex with smaller ΔE is more reactive but, Zr(IV) complex with higher ΔE is less reactive than FEB and Para. The antibacterial activity of FEB, Para, and their complexes were tested against two G-ve and three G+ve bacteria. Co(II) complex displayed remarkable effectiveness and high significance against all strains of bacteria, compared with other compounds tested. All compounds demonstrated antioxidant effects, Cu(II) and Zr(IV) show greater antioxidants than parent ligands with IC50 values 0.040 and 0.057 mg/mL. The binding pattern and active site of all compounds were put through molecular docking studies and compared with empirical biological data.

Performance evaluation of Trichoderma reseei in tolerance and biodegradation of diuron herbicide in agar plate, liquid culture and solid-state fermentation.

The present study evaluated the performance of the fungus Trichoderma reesei to tolerate and biodegrade the herbicide diuron in its agrochemical presentation in agar plates, liquid culture, and solid-state fermentation. The tolerance of T. reesei to diuron was characterized through a non-competitive inhibition model of the fungal radial growth on the PDA agar plate and growth in liquid culture with glucose and ammonium nitrate, showing a higher tolerance to diuron on the PDA agar plate (inhibition constant 98.63 mg L-1) than in liquid culture (inhibition constant 39.4 mg L-1). Diuron biodegradation by T. reesei was characterized through model inhibition by the substrate on agar plate and liquid culture. In liquid culture, the fungus biotransformed diuron into 3,4-dichloroaniline using the amide group from the diuron structure as a carbon and nitrogen source, yielding 0.154mg of biomass per mg of diuron. A mixture of barley straw and agrolite was used as the support and substrate for solid-state fermentation. The diuron removal percentage in solid-state fermentation was fitted by non-multiple linear regression to a parabolic surface response model and reached the higher removal (97.26%) with a specific aeration rate of 1.0 vkgm and inoculum of 2.6 × 108 spores g-1. The diuron removal in solid-state fermentation by sorption on barley straw and agrolite was discarded compared to the removal magnitude of the biosorption and biodegradation mechanisms of Trichoderma reesei. The findings in this work about the tolerance and capability of Trichoderma reesei to remove diuron in liquid and solid culture media demonstrate the potential of the fungus to be implemented in bioremediation technologies of herbicide-polluted sites.

Dual hydrogen bond donor functionalized hierarchical porous poly(ionic liquid)s for efficient CO2 fixation into cyclic carbonates

CO2 capture and conversion to high-value-added products is critical for the purposes of environmental preservation and carbon resource utilization. In this study, a novel class of porous poly(ionic liquid)s has been synthesized, incorporating dual hydrogen bond donors (amide and hydroxyl groups) and nucleophiles (Br-) as multiple effective active sites for the cycloaddition reaction between CO2 and epoxides. The presence of dual hydrogen bond donors not only provides two active sites for synergistic catalysis with epoxides but also enhances the capacity for CO2 adsorption. Comprehensive characterization has been conducted to elucidate the structural features and properties of these innovative materials. By regulating the ratio between ionic liquid monomer and divinylbenzene, a hierarchical porous structure favorable for the reaction was constructed, resulting in optimized catalytic activity comparable to that of bulk ionic liquid monomers. Furthermore, this catalyst exhibits remarkable structural stability with minimal activity loss even after five consecutive use cycles. Combining density functional theory calculations with in-situ Fourier transform infrared spectroscopy analysis, the catalytic mechanism was proposed that the dual hydrogen bond donors and Br- synergistically promote ring-opening reactions of epoxides, while amide groups serve as basic sites to enhance CO2 adsorption during the reaction process.

Interaction of Cyclodextrins with Amphiphilic Alternating Cooligomers Possessing the Dense Triazole Backbone.

The interaction of cyclodextrins (CDs) with structure-controlled polymers is expected to provide significant insights into macromolecular recognition. However, the interaction of CDs with structure-controlled polymers has been an underexamined issue of investigation. Herein, alternating amphiphilic cooligomers (oligoCnAH, where n denotes the carbon number of alkyl groups; n = 4, 8, and 12) were synthesized by copper(I)-catalyzed azide-alkyne cycloaddition polymerization of heterodimers of 4-azido-5-hexynoic acid (AH) derivatives carrying N-alkylamide and t-butyl (tBu) ester side chains, followed by hydrolysis of the tBu ester, to study the interaction of CDs with oligoCnAH by 1H NMR, nuclear Overhauser effect spectroscopy, and pulse-field-gradient spin-echo NMR. These NMR studies indicated that αCD interacted with oligoC4AH, αCD and βCD interacted with oligoC8AH, and all CDs interacted with oligoC12AH. Based on the equilibrium models proposed, the binding constants were evaluated for the binary mixtures, which showed interaction. Comparing the interactions of the CDs/oligoC12AH binary mixtures with those of the binary mixtures of CDs and alternating copolymers of sodium maleate and dodecyl vinyl ether (polyC12M), it is concluded that oligoC12AH forms less stable micelles than does polyC12M presumably because of the lower molecular weight, the hydrophilic amide groups in the side chain, and the longer interval between neighboring C12 groups in oligoC12AH.

Asparagine-Glucose Amadori Compounds: Formation, Characterization, and Analysis in Dry Jujube Fruit.

Amadori rearrangement products of asparagine with glucose (Asn-Glc-ARP) were first prepared through Maillard model reactions and identified via liquid chromatography-mass spectroscopy. With the study on the effect of the reaction temperature, pH values, and reaction time, the ideal reaction condition for accumulation of Asn-Glc-ARP was determined at 100 °C for 40 min under pH 7. Asparagine (Asn) was prone to degrade from Asn-Glc-ARP in alkaline pH values within a lower temperature range, while in an acidic environment with high temperatures, deamidation of Asn-Glc-ARP to Asp-Glc-ARP (Amadori rearrangement products of aspartic acid with glucose) was displayed as the dominant pathway. The deamidation reaction on the side chain of the amide group took place at Asn-Glc-ARP and transferred it into the hydroxyl group, forming Asp-Glc-ARP at the end. Considering that lyophilization as pretreatment led to limited water activity, a single aspartic acid was not deamidated from Asn directly nor did it degrade from Asp-Glc-ARP even at 120 °C. The degradation of Asn-Glc-ARP through tandem mass spectrometry (MS/MS) analysis showed the obvious fragment ion at m/z 211, indicating that the stable oxonium ion formed during fragmentation. The structure of Asn-Glc-ARP was proposed as 1-deoxy-1-l-asparagino-d-fructose after separation and purification. Also, the content of Asn-Glc-ARP within dry jujube fruit (HeTianYuZao) was quantitated as high as 8.1 ± 0.5 mg/g.

Fabrication and characterization of a multi-functional GBR membrane of gelatin-chitosan for osteogenesis and angiogenesis

Guided bone regeneration (GBR) membranes are widely used to treat bone defects. In this study, sequential electrospinning and electrospraying techniques were used to prepare a dual-layer GBR membrane composed of gelatin (Gel) and chitosan (CS) containing simvastatin (Sim)-loaded poly(lactic-co-glycolic acid) (PLGA) microspheres (Sim@PLGA/Gel-CS). As a GBR membrane, Sim@PLGA/Gel-CS could act as a barrier to prevent soft tissue from occupying regions of bone tissue. Furthermore, compared with traditional GBR membranes, Sim@PLGA/Gel-CS played an active role on stimulating osteogenesis and angiogenesis. Determination of the physical, chemical, and biological properties of Sim@PLGA/Gel-CS membranes revealed uniform sizes of the nanofibers and microspheres and appropriate morphologies. Fourier-transform infrared spectroscopy was used to characterize the interactions between Sim@PLGA/Gel-CS molecules and the increase in the number of amide groups in crosslinked membranes. The thermal stability and tensile strength of the membranes increased after N-(3-dimethylaminopropyl)-N9- ethylcarbodiimide/N-hydroxysuccinimide crosslinking. The increased fiber density of the barrier layer decreased fibroblast migration compared with that in the osteogenic layer. Osteogenic function was indicated by the increased alkaline phosphatase activity, calcium deposition, and neovascularization. In conclusion, the multifunctional effects of Sim@PLGA/Gel-CS on the barrier and bone microenvironment were achieved via its dual-layer structure and simvastatin coating. Sim@PLGA/Gel-CS has potential applications in bone tissue regeneration.

Non-isothermal crystallization and thermal degradation studies on nylons 7,10 and 10,7 as isomeric odd-even and even-odd polyamides

Aliphatic polyamides (nylons) show a remarkable variability in terms of crystallographic structures, polymorphic transitions and crystal morphology despite all polymers of this family have a simple constitution that is based on amide groups and polymethylene segments. Nylons derived from diamines and dicarboxylic acids having different parity (e.g., even or odd) have peculiar characteristics due to the difficulty of establishing an optimal hydrogen-bonding geometry when molecular chains adopt a typical all trans conformation. In this work, two isomeric odd-even (nylon 7,10) and even-odd (nylon 10,7) polyamides with the same methylene/amide ratio have been studied. Specifically, crystallization kinetics have been evaluated from calorimetric data, while thermal degradation mechanisms from thermogravimetric analysis. Classical methods (e.g., Avrami) together with isoconversional analyses have been considered for crystallization studies, being found significant differences between both nylons in terms of nucleation and activation energies. The isoconversional analyses of the non-isothermal crystallization allowed to determine the temperature dependence of both the crystal growth and the overall crystallization rate that points out the slower crystallization process of nylon 10,7. Isoconversional methods (integral and differential) were applied to evaluate thermal degradation. The mechanism was similar for both nylons (e.g., A3/2 and A1.8 for nylons 7,10 and 10,7, respectively), although a remarkable difference was determined for the corresponding activation energies (175 and 210 kJ/mol for nylons 7,10 and 10,7, respectively).

Multifunctionalized Carbon Dots as an Active Nanocarrier for Drug Delivery to the Glioblastoma Cell Line.

Nanoparticle-based nanocarriers represent a viable alternative to conventional direct administration in cancer cells. This advanced approach employs the use of nanotechnology to transport therapeutic agents directly to cancer cells, thereby reducing the risk of damage to healthy cells and enhancing the efficacy of treatment. By approving nanoparticle-based nanocarriers, the potential for targeted, effective treatment is greatly increased. The so-called carbon-based nanoparticles, or carbon dots, have been hydrothermally prepared and initiated by a polymerization process. We synthesized and characterized nanoparticles of 2-acrylamido-2-methylpropanesulfonic acid, which showed biocompatibility with glioblastoma cells, and further, we tested them as a carrier for the drug riluzole. The obtained nanoparticles have been extensively characterized by techniques to obtain the exact composition of their surface by using Fourier transform infrared (FTIR), X-ray photoelectron spectroscopy (XPS), and nuclear magnetic resonance (NMR) spectroscopy, as well as cryo-transmission electron microscopy. We found that the surface of the synthesized nanoparticles (NPs) is covered mainly by sulfonated, carboxylic, and substituted amide groups. These functional groups make them suitable as carriers for drug delivery in cancer cells. Specifically, we have successfully utilized the NPs as a delivery system for the drug riluzole, which has shown efficacy in treating glioblastoma cancer cells. The effect of nanoparticles as carriers for the riluzole system on glioblastoma cells was studied using live-cell synchrotron-based FTIR microspectroscopy to monitor in situ biochemical changes. After applying nanoparticles as nanocarriers, we have observed changes in all biomacromolecules, including the nucleic acids and protein conformation. These findings provide a strong foundation for further exploration into the development of targeted treatments for glioblastoma.

Coated Cotton Fabrics with Antibacterial and Anti-Inflammatory Silica Nanoparticles for Improving Wound Healing.

Herein, we report the preparation of bifunctional silica nanoparticles by covalent attachment of both an anti-inflammatory drug (ibuprofen) and an antibiotic (levofloxacin or norfloxacin) through amide groups. We also describe the coating of cotton fabrics with silica nanoparticles containing both ibuprofen and norfloxacin moieties linked by amide groups by using a one-step coating procedure under ultrasonic conditions. The functionalized nanoparticles and cotton fabrics have been characterized using spectroscopic and microscopic techniques. The functionalized nanoparticles and textiles have been treated with model proteases for the in situ release of the drugs by the amide bond enzymatic cleavage. Topical dermal applications in medical bandages are expected, which favor wound healing.

A simple and reliable electrochemical method employing an unmodified boron-doped diamond electrode for the determination of triclocarban

Since the advent of the COVID-19 pandemic, triclocarban-containing cleaning products have been increasingly consumed. As triclocarban is an emerging compound, it is necessary to develop new sensors for its monitoring. So, a simple and reliable electroanalytical method for the determination of triclocarban using an unmodified boron-doped diamond electrode was developed. The application of a cathodic pretreatment (−2.0 V, 30 min, 0.5 mol L−1 H2SO4) on the electrode surface provided higher current intensities and lower resistance to charge transfer in contrast to the non-treated surface. On the diamond electrode surface, the triclocarban showed an irreversible behavior with two oxidation peaks at +1.10 and +1.40 V vs. Ag/AgCl, KCl(sat). The hypothesis for removing hydrogens of both amide groups of the triclocarban structure was supported by computational methodology which also explained the broadened oxidation peaks and the distance between them. The calibration curve for triclocarban, obtained by using differential pulse voltammetry in a supporting electrolyte composed of McIlvaine buffer (pH 3.0) and ethanol (80:20 v/v), covered a concentration range of 1.0 to 50 μmol L−1, and it exhibited a detection limit of 0.31 μmol L−1 under optimized experimental conditions. Using an accumulation time of 120 s at open circuit potential, a calibration curve by differential pulse adsorptive stripping voltammetry was constructed in a range of 0.05 to 20 µmol L−1 of triclocarban, with a detection limit of 18 nmol L−1. Triclocarban quantification assays were carried out on samples of antibacterial soaps and river water, and data were recorded with acceptable precision and accuracy.

The amide group and its preparation methods by acid-amine coupling reactions: an overview

The amide group and its preparation methods by acid-amine coupling reactions: an overview