Amberlite XAD-2 Research Articles

Catalytic Hydrolysis of Paraoxon by Immobilized Copper(II) Complexes of 1,4,7-Triazacyclononane Derivatives.

Organophosphate neuroactive agents represent severe security threats in various scenarios, including military conflicts, terrorist activities and industrial accidents. Addressing these threats necessitates effective protective measures, with a focus on decontamination strategies. Adsorbents such as bentonite have been explored as a preliminary method for chemical warfare agent immobilization, albeit lacking chemical destruction capabilities. Chemical decontamination, on the other hand, involves converting these agents into non-toxic or less toxic forms. In this study, we investigated the hydrolytic activity of a Cu(II) complex, previously studied for phosphate ester hydrolysis, as a potential agent for chemical warfare decontamination. Specifically, we focused on a ligand featuring a thiophene anchor bound through an aliphatic spacer, which exhibited high hydrolytic activity in its Cu(II) complex form in our previous studies. Paraoxon, an efficient insecticide, was selected as a model substrate for hydrolytic studies due to its structural resemblance to specific chemical warfare agents and due to the presence of a chromogenic 4-nitrophenolate moiety. Our findings clearly show the hydrolytic activity of the studied Cu(II) complexes. Additionally, we demonstrate the immobilization of the studied complex onto a solid substrate of Amberlite XAD4 via copolymerization of its thiophene side group with dithiophene. The hydrolytic activity of the resultant material towards paraoxon was studied, indicating its potential utilization in organophosphate neuroactive agent decontamination under mild conditions and the key importance of surface adsorption of paraoxon on the polymer surface.

Assessment of in situ product recovery techniques to enhance 2-phenylethanol production by Acinetobacter soli ANG344B

The 2-phenylethanol (2-PE) production process by the newly isolated Acinetobacter soli ANG344B is limited by product toxicity. To overcome this limitation and enhance 2-PE production process, various alternatives based in in situ product removal (ISPR) approaches were evaluated. The approaches selected for assessment were gas stripping using the air supplied to the bioreactor, liquid-liquid extraction and adsorption. Adsorption was found to be the most promising approach to increase 2-PE production. Amberlite XAD 4 was chosen from the different adsorbents tested since it has high affinity for 2-PE, being able to adsorb 205.8 ± 8.1 mg2-PE/gdry resin. In a batch cultivation process, in presence of 3 % (dry w/v) of Amberlite XAD 4, A. soli ANG344B was able to produce 6.99 ± 0.06 g/L of 2-PE with a volumetric productivity of 0.17 ± 0.00 g/L.h, which represents an improvement of 3.3-fold. To the best of our knowledge, this is the highest 2-PE production reported for a wild-type bacteria. These findings highlight the potential of Acinetobacter soli ANG344B as 2-PE producer, contributing to the development of natural 2-PE production process.

Effective and sustainable removal of Pb2+ ions from wastewater by a new synthetic bis-thiosemicarbazone derivative immobilized in amberlite XAD-2: Kinetic, isotherm and thermodynamic aspects

ABSTRACT A new composite material, named TSC/AXAD-2, was developed by incorporating a bis-thiosemicarbazone derivative (TSC) into Amberlite XAD-2 to extract Pb2+ ions from wastewater. The new composite was characterized using XPS, TGA, FTIR, BET, EDX, 1H-NMR, 13C-NMR, and GC-MS analyses. The sorption parameters, such as pH value of media, equilibrium time, initial Pb2+ ion concentration, composite dose, temperature, and eluting agents, were methodically optimized. The utmost adsorption capacity is 45.3 mg.g−1; it was achieved at pH value of of 5.5, 15 min of agitation, room temperature, and initial concentration of 200 mg.L−1 Pb2+ ions. The isotherm studies revealed that the adsorption process closely matches the Langmuir model, with a theoretical retention capacity of 46.12 mg.g−1. Furthermore, kinetic modeling using the pseudo-first-order accurately depicted the adsorption of Pb2+ ions. The thermodynamic study suggested that the adsorption process is exothermic, spontaneous, and more favorable at lower temperatures. The desorption of Pb2+ ions from the loaded composite was conducted with 1.0 M of either HCl or HNO3. The TSC/AXAD-2 composite successfully met WHO and FAO guidelines for removal of Pb2+ ions from wastewater before its discharge into the marine environment.

Engineering Streptomyces albus B4 for Enhanced Production of (R)-Mellein: A High-Titer Heterologous Biosynthesis Approach.

The natural compound (R)-(-)-mellein exhibits antiseptic and fungicidal activities. We investigated its biosynthesis using the polyketide synthase encoded by SACE_5532 (pks8) from Saccharopolyspora erythraea heterologously expressed in Streptomyces albus B4, a chassis chosen for its fast growth, genetic manipulability, and ample large short-chain acyl-CoA precursor supply. High-level heterologous (R)-(-)-mellein yield was achieved by pks8 overexpression and duplication. The precursor supply pathways were strengthened by overexpression of SACE_0028 (encoding acetyl-CoA carboxylase) and four genes involved in β-oxidation (fadD, fadE, fadB, and fadA). Cell growth inhibition by (R)-(-)-mellein production at high concentration was relieved by in situ adsorption using Amberlite XAD16 resin. The final strain, B4mel12, produced (R)-(-)-mellein at 6395.2 mg/L in shake-flask fermentation. Overall, this is the first report of heterologous (R)-(-)-mellein synthesis in microorganism with a high titer. (R)-(-)-mellein prototype in this study opens a possibility for the overproduction of valuable melleins in S. albus B4.

Quercetin as the primary xanthine oxidase inhibitor compound in Maclura tricuspidata leaf

Maclura tricuspidata (MT) leaf demonstrated various health benefits, notably the inhibition of xanthine oxidase (XOD) activity, which is crucial in the management of hyperuricaemia and many diseases related to oxidative stress. This study aimed to identify the primary compound responsible for this inhibitory effect. Through a systematic investigation, MT leaf extracts were subjected to solvent-solvent partitioning using ethyl acetate, n-hexane, n-butanol, and dichloromethane. Further purification involved adsorption and desorption using Amberlite XAD-2 resin, followed by column chromatography on Silica Gel and Sephadex LH-20. The purified compounds were analysed using UPLC-QTOF-MS coupled with NMR spectroscopy. Our findings identified quercetin, a phenolic compound, as the most significant inhibitor of XOD activity in MT leaf, with an IC50 value of 212.92 μg/ml. This is the first report of purifying and identifying a single compound responsible for XOD inhibition in MT.

Utilization of macroporous beads impregnated with Cyanex 572 for effective separation of Sr(II), Y(III), and Zr(IV) from chloride medium: batch and fixed-bed column study

This work focuses on using a new, inexpensive adsorbent, Amberlite XAD–4 resin impregnated with Cyanex 572 to extract and separate Zr(IV) from its parents Y(III) and Sr(II). The extraction performance was investigated using both batch and continuous flow techniques. The highest separation factor of Zr from Y and Sr was obtained at 0.05 mol L−1 HCl. Zr(IV), Y(III), and Sr(II) were found to have maximal monolayer capacities of 29.1, 9.3, and 6.1 mg g−1, respectively. Chromatography was utilized to effectively separate the relevant metals from their mixed solution in a single step, yielding high recovery values of approximately 99.0%.

Native Mexican black bean purified anthocyanins fractionated by high-performance counter-current chromatography modulate inflammatory pathways

In addition to their pigment properties, the potential health benefits of anthocyanins have made them a subject of interest in recent years. This study aimed to obtain purified anthocyanin fractions from native Mexican black bean cultivars using Amberlite XAD-7 resin column and HPCCC and evaluate their anti-inflammatory properties using RAW 264.7 cells. The major anthocyanins in the purified anthocyanin fractions were delphinidin 3-glucoside (61.8%), petunidin 3-glucoside (25.2%), and malvidin 3-glucoside (12.2%). Purified anthocyanin fractions at 12.5 μg/mL effectively prevented LPS-induced ERK1/ERK2 phosphorylation and reduced the protein expression of COX-2 and mRNA expression of iNOS. Results showed that purified anthocyanin fractions have the potential to modulate the inflammatory response by inhibiting the production of pro-inflammatory mediators through the ERK1/ERK2 and NF-κB pathways. This study suggests that anthocyanins from black beans could be used as a natural strategy to help modulate inflammation-associated diseases.

An Adsorption Based Downstream Processing Approach for Penicillin V from a Penicillium chrysogenum BIONCL I22 Culture Filtrate.

Penicillin V (phenoxy methyl penicillin) is highly sought after among natural penicillins because of its exceptional acid stability and effectiveness against common skin and respiratory infections. Given its wide-ranging therapeutic uses, there is a need to establish a greener method for its maximum recovery to reduce the carbon footprint. Here, we have identified and validated optimized operational conditions for resin-based penicillin V recovery. It was observed that Amberlite XAD4 had the highest penicillin V hydrophobic adsorption capacity among the other screened resins. Kinetic and isothermal studies using linear and nonlinear regression analysis showed that the adsorption process well fitted with pseudo-second-order kinetics (R 2 = 0.9816) and the Freundlich adsorption isotherm model (R 2 = 0.9871). Adsorption equilibrium was attained within 4 h, while maximum adsorption was observed at 3 mg/mL penicillin V concentration. Furthermore, the optimized extraction protocol was compared with the conventional butyl acetate-based downstream processing. Under optimum conditions resin-based penicillin V recovery was 2-fold higher as compared to the solvent extraction method and the resin could be reused for over six cycles without compromising the yield. These findings signify substantial progress toward the development of an environmentally sustainable approach for penicillin V recovery and a potentially viable method for extractive fermentation.

Development of complete hydrometallurgical processes for gold recovery from ICs and CPUs using ionic liquids

Integrated circuits (ICs) and central processing units (CPUs), essential components of electrical and electronic equipment (EEE), are complex composite materials rich in recyclable high-value strategic and critical metals, with many in concentrations higher than in their natural ores. With gold the most valuable metal present, increase in demand for gold for EEE and its limited availability have led to a steep rise in the market price of gold, making gold recycling a high priority to meet demand. To overcome the limitations associated with conventional technologies for recycling e-waste, the use of greener technologies (ionic liquids (ILs) as leaching agents), offers greater potential for the recovery of gold from e-waste components. While previous studies have demonstrated the efficiency and feasibility of using ILs for gold recovery, these works predominantly concentrate on the extraction stage and often utilise simulated solutions, lacking the implementation of a complete process validated with real samples to effectively assess its overall effectiveness. In this work, a simulated Model Test System was used to determine the optimal leaching and extraction conditions before application to real samples. With copper being the most abundant metal in the e-waste fractions, to access the gold necessitated a two-stage pre-treatment (nitric acid leaching followed by aqua regia leaching) to ensure complete removal of copper and deliver a gold-enriched leach liquor. Gold extraction from the leach liquor was achieved by liquid-liquid extraction using Cyphos 101 (0.1 M in toluene with an O:A = 1:1, 20 °C, 150 rpm, and 15 min) and as a second process by sorption extraction with loaded resins (Amberlite XAD-7 with 300 mg of Cyphos 101/g of resins at 20 °C, 150 rpm and 3 h). In both processes, complete stripping and desorption of gold was achieved (0.5 M thiourea in 0.5 M HCl) and gold recovered, as nanoparticles of purity ≥95%, via a reduction step using a sodium borohydride solution (0.1 M NaBH4 in 0.1 M NaOH). These two hydrometallurgical processes developed can achieve overall efficiencies of ≥95% for gold recovery from real e-waste components, permit the reuse of the IL and resins up to five consecutive times, and offer a promising approach for recovery from any e-waste stream rich in gold.

A sensitive determination of Brilliant Blue FCF in some food samples using hydrophillic deep eutectic solvent-assisted magnetic nano gel-based dispersive solid phase microextraction prior to spectrophotometric analysis

A new magnetic nano gel (MNG) was prepared from choline chloride/phenol deep eutectic solvent and magnetic amberlite XAD-7 nanocomposite. The dispersive solid phase micro extraction (dSPME) method was developed for seperation and preconcentration of Brilliant Blue FCF (BB) by the prepared MNG. In this study, firstly, the optimum DES type and mole ratio of DES were investigated before response surface methodology optimization. Then, the effect of the MNG-dSPME experimental parameters were optimized by response surface methodology using central composite design. Under the optimum microextraction conditions, limit of detection (LOD), limit of quantification (LOQ), preconcentration factor (PF), enhencament factor (EF) were found to be 1.15 μg L−1,3.80 µg L-1, 70, and 88, respectively. It was seen that the recovery of real samples were obtained from 95.5 to 103.6%. The pesent method was succesfully for extraction of BB in some food, personal care samples, to the best of our knowledge, this is the first study that is presented method on determination of BB by preconcentration with magnetic nano gel. The obtained results showed that the present procedure is effective, sensitive, and has high accuracy for the quantitative detection of BB.

Anticandidal Activity of a Siderophore from Marine Endophyte Pseudomonas aeruginosa Mgrv7.

An endophytic symbiont P. aeruginosa-producing anticandidal siderophore was recovered from mangrove leaves for the first time. Production was optimal in a succinate medium supplemented with 0.4% citric acid and 15 µM iron at pH 7 and 35 °C after 60 h of fermentation. UV spectra of the acidic preparation after purification with Amberlite XAD-4 resin gave a peak at 400 nm, while the neutralized form gave a peak at 360 nm. A prominent peak with RP-HPLC was obtained at RT 18.95 min, confirming its homogeneity. It was pH stable at 5.0-9.5 and thermally stable at elevated temperatures, which encourages the possibility of its application in extreme environments. The minimum inhibitory concentration (MIC) and minimum fungicidal concentration (MFC) against Candida spp. Were in the range of 128 µg/mL and lower. It enhanced the intracellular iron accumulation with 3.2-4.2-fold (as judged by atomic absorption spectrometry) with a subsequent increase in the intracellular antioxidative enzymes SOD and CAT. Furthermore, the malondialdehyde (MDA) concentration due to cellular lipid peroxidation increased to 3.8-fold and 7.3-fold in C. albicans and C. tropicalis, respectively. The scanning electron microscope (SEM) confirmed cellular damage in the form of roughness, malformation, and production of defensive exopolysaccharides and/or proteins after exposure to siderophore. In conclusion, this anticandidal siderophore may be a promising biocontrol, nonpolluting agent against waterborne pathogens and pathogens of the skin. It indirectly kills Candida spp. by ferroptosis and mediation of hyperaccumulation of iron rather than directly attacking the cell targets, which triggers the activation of antioxidative enzymes.

Isolation of Polyphenols from Aqueous Extract of the Halophyte Salicornia ramosissima.

Polyphenols from residual non-food grade Salicornia ramosissima have health-promoting effects in feed, food, or nutraceutical applications. Therefore, the isolation of polyphenols is of interest from a series of environmentally friendly isolation methods with recyclable solvents. The isolation of polyphenols from non-food grade S. ramosissima was investigated using sequential membrane filtration with and without acid pretreatment, liquid-liquid extraction, resin adsorption, and centrifugal partition chromatography (CPC); analyzed by the Folin-Ciocalteu assay for total polyphenols; and finally analyzed using UPLC-TQMS in negative ion-spray mode for detection of 14 polyphenols. Sequential membrane filtration and acid hydrolysis indicated the polyphenols forming complexes with other compounds, retaining the polyphenols in the retentate fraction of large molecular weight cut-off membrane sizes. Conventional liquid-liquid extraction using sequential ethyl acetate and n-butanol showed most polyphenols were extracted, apart from chlorogenic acids, indicating a low isolation efficiency of higher polarity polyphenols. Analysis of the extract after resin adsorption by Amberlite XAD-4 resin showed high efficiency for separation, with 100% of polyphenols adsorbed to the resin after 13 bed volumes and 96.7% eluted from the resin using ethanol. CPC fractionations were performed to fractionate the concentrated extract after resin adsorption. CPC fractionations of the 14 polyphenols were performed using an organic or aqueous phase as a mobile phase. Depending on the mobile phase, different compounds were isolated in a high concentration. Using these easily scalable methods, it was possible to comprehensively study the polyphenols of interest from S. ramosissima and their isolation mechanics. This study will potentially lead the way for the large-scale isolation of polyphenols from S. ramosissima and other complex halophytes. The compounds of the highest concentration after CPC fractionation were isoquercitrin and hyperoside (155.27 mg/g), chlorogenic acid (85.54 mg/g), cryptochlorogenic acid (101.50 mg/g), and protocatechuic acid (398.67 mg/g), and further isolation using CPC could potentially yield novel polyphenol nutraceuticals.

Preconcentration and determination of Cu(II) and Cd(II) ions from wastewaters by using hazelnut shell biosorbent immobilized on Amberlite XAD-4 resin

Hazelnut shell biosorbent immobilized on Amberlite XAD-4 polymer resin as solid phase extraction method was developed and used for preconcentration of Cu(II) and Cd(II) ions from aqueous solutions. Concentrations of analytes in solutions were determined by Flame Atomic Absorption Spectrometry after extraction with column technique. Functional groups of nutshell biosorbent immobilized on resin were characterized by Fourier transform infrared spectrometry. Optimized critical parameters for preconcentration of Cu2+ and Cd2+ ions from sample solutions with nutshell immobilized on the resin were the pH value of solution, type of eluent solutions, the flow rate of sample solution, quantities of nutshell biosorbent, Amberlite XAD-4 resin, and enrichment factors, respectively. Detection limits of Cu2+ and Cd2+ ions found were 0.29 μg L-1 and 0.25 μg L-1, respectively. The method proposed was applied for determinations of Cu2+ and Cd2+ ions in standard reference material (BCR-670 aquatic plant sample) for accuracy and applied to real water samples such as wastewater and Van lake water. At the 95% confidence level, relative standard deviations (RSDs) were found as 1.44% for Cd2+ and 1.21% for Cu2+ ions with three replicate measurements.

Biotechnological strategies for controlled accumulation of flavones in hairy root culture of Scutellaria lateriflora L.

Accumulation of medicinally important flavones and acteoside was evaluated in Scutellaria lateriflora hairy root cultures subjected to different experimental strategies – feeding with precursors of phenolics biosynthesis (phenylalanine, cinnamic acid, and sodium cinnamate), addition of elicitors (chitosan, jasmonic acid) and Amberlite XAD-4 and XAD-7 resins and permeabilization with dimethyl sulfoxide (DMSO) and methanol. The production profile of S. lateriflora cultures changed under the influence of the applied strategies. Hairy roots of S. lateriflora were found to be a rich source of wogonoside or wogonin, depending on the treatment used. The addition of sodium cinnamate (1.0 mg/L) was the most effective approach to provide high production of flavonoids, especially wogonoside (4.41% dry weight /DW/; 566.78 mg/L). Permeabilization with DMSO (2 µg/ml for 12 h) or methanol (30% for 12 h) resulted in high biosynthesis of wogonin (299.77 mg/L and 274.03 mg/L, respectively). The obtained results provide new insight into the selection of the optimal growth conditions for the production of in vitro biomass with a significant level of flavone accumulation. The data may be valuable for designing large-scale cultivation systems of hairy roots of S. lateriflora with high productivity of bioactive compounds – wogonin or wogonoside.

Simultaneous extraction and purification of natural astaxanthin from Haematococcus pluvialis using adsorptive chromatography

The Haematococcus pluvialis is a recognized source of natural astaxanthin. The realm of astaxanthin bioprocessing is emerging with advanced techniques of cultivation and astaxanthin extraction. The present study addresses constraint of H. pluvialis cultivation under the Indian tropical environment for improved astaxanthin production, followed by purification of extracted astaxanthin. The chemical-based extraction using DMSO, yielded 163 mg g−1 of astaxanthin. Further, alkaline saponification was performed with 0.015 M NaOH at 25 °C to de-esterify astaxanthin esters. Considering the prerequisite of food and feed applications, a process was developed for the removal of non-GRAS solvent (DMSO) using adsorptive chromatography. Based on static adsorption and desorption studies of the resins, Amberlite XAD 1180 N was selected for column chromatography. Purification by column chromatographic study yielded DMSO-free 97.3 mg g−1 of astaxanthin, resulting in 80.8 % recovery. Stability studies confirmed 92 % retention of purified astaxanthin with 85 % antioxidant activity at 4 °C over 90 days.

Isolation and structural determination of cis- and trans-p-coumaroyl-secologanoside (comselogoside) from olive oil waste (alperujo). Photoisomerization with ultraviolet irradiation and antioxidant activities

p-Coumaroyl-6́-secologanoside (comselogoside) is a secoiridoid identified in large amounts in olive fruits, although no studies in vitro or in vivo of comselogoside have been reported. This work focuses on the recovery and purification of this compound from olive mill waste (alperujo). The successive isolation on Amberlite XAD-16 and Sephadex LH-20 resins, allowed a comselogoside extract with 80–85% of purity. A photoisomerization of the vinyl-double bond in the p-coumaroyl moiety occurred when the extract was exposed to ultraviolet radiation and a mixture of the trans and cis-isomers was obtained. Both isomers were characterized using NMR, mass spectroscopy, and UV spectrometry. The J (coupling constant) of the protons on the C7 and C8 on the unsaturated chain were found to be the difference between cis (12.8 Hz) and trans- (15.9 Hz) comselogoside. Cis-isomer exhibited lower radical-scavenging activity than trans, although a synergistic effect occurred when the cis-isomer was supplement by the trans-isomer.

Investigation and elimination of surfactant-induced interferences in anodic stripping voltammetry for the determination of trace amounts of cadmium

This article aims to investigate in detail to what extent surfactants affect the determination of cadmium by anodic stripping voltammetry. In recent years, the production and use of surfactants have been steadily increasing, so that their concentration in environmental water samples is rising. At the same time, it is known that organic compounds, such as surfactants, often hinder the voltammetric determination of trace elements by stripping. Non-ionic (Triton X-100, Brij 35, Tween 20, Tween 60, Tween 80), cationic (CTAB, CTAC, DTAB, HPC) and anionic (DSS, SDS) compounds were selected to investigate the effect of surfactants on the voltammetric signal of cadmium. At the same time, the extent to which the addition of Amberlite resins to the analysed solution eliminates the interfering effect of surfactants was tested. Three types of Amberlite resins XAD-2, XAD-7 and XAD-16 were selected for the study and the ratio of resin weight to solution volume was determined. Finally, the determination of cadmium in surfactant-enriched environmental samples was carried out. The recoveries obtained between 95.5 and 107%, with RSD between 3.4 and 6.2%, confirm the validity and correctness of the proposed procedure All measurements were carried out by anodic stripping voltammetry using a CNTs/SGC electrode modified with a bismuth film as the working electrode.

Highly efficient and selective adsorption of palladium(II) from simulated nuclear waste solution using Amberlite XAD-7 resin impregnated with a phenanthroline-derived diamide

The increasing demand and limited natural resources for rare precious metal palladium render its separation and recovery from secondary sources such as acidic nuclear liquid waste greatly interesting. Herein, a novel Et-Tol-DAPhen extraction resin was prepared by impregnating Amberlite XAD-7 resin with a phenanthroline-derived diamide extractant N,N′-diethyl-N,N′-ditolyl-2,9-diamide-1,10-phenanthroline (Et-Tol-DAPhen), and the adsorption behavior of this new extraction resin towards Pd2+ in HNO3 solution was investigated through the batch and column experiments. The Et-Tol-DAPhen extraction resin exhibited strong adsorbability, high adsorption capacity, excellent selectivity and good reusability for Pd2+ in highly acidic HNO3 solution. In addition, the pseudo-second-order and Langmuir models were applied to understand the adsorption process of Pd2+ on Et-Tol-DAPhen extraction resin, respectively. It demonstrated the characteristics of a uniform single-layer chemisorption. The maximum uptake capacity could reach as high as 74.6 mg g−1 for Pd2+ in 3.0 mol/L HNO3 solution which is much higher than most adsorbent materials of palladium reported before. Furthermore, Et-Tol-DAPhen extraction resin could selectively uptake Pd2+ from a simulated acidic nuclear waste solution containing 20 different kinds of ions with the separation factor SFPd/M values as high as 100 to 10,000. Moreover, although the adsorption efficiency had a slight decrease after 5 times of adsorption-desorption process, it still remained at a high level. This new extraction resin displayed a potential application prospect in the field of separation and recovery of Pd2+ from acidic nuclear liquid waste.

Characterization of a solid-supported aqueous biphasic system for the sorption of dyes from aqueous solution

An aqueous biphasic system (ABS) comprising solutions of ammonium sulfate and polyethylene glycol-2000 (PEG-2000) in which the latter is supported on a porous polymeric substrate (Amberlite XAD-16) has been characterized by examining its performance in the removal of dyes from aqueous solution. Comparison of its behavior to that of a commercial sorbent (ABEC) consisting of a polyethylene glycol covalently bound to a polymer support indicates that the capacity, uptake kinetics, and efficiency of the supported ABS are comparable or superior to that of the ABEC resin. In addition, results obtained at various PEG-2000 concentrations and with PEGs of a range of molecular weights demonstrate that in contrast to ABEC resin, the behavior of a supported ABS can be readily “tuned” to provide the desired dye retention. The relative retention of various dyes is not generally predictable from their behavior in an analogous liquid-liquid system, however, the apparent result of synergistic effects between the XAD-16 support and the PEG phase.

Fungal biodegradation of ellagitannins extracted from rambutan peel

The rambutan peel is a by-product with a high quantity of ellagitannins. When ellagitannins are biodegraded, they produce ellagic acid. This work aimed to extract ellagitannins from rambutan peel and make a solid-state fermentation (SSF) to identify which enzymes are involved in the biodegradation of ellagitannins. Extraction of rambutan ellagitannins (RE) was done by microwave/ultrasound technology, isolated by column chromatography with Amberlite XAD-16 resin, and characterized by HPLC-MS. The SSF was done using RE as substrate at three different concentrations (7.5, 15, and 22.5 g/L), Aspergillus niger GH1, polyurethane foam as support and Czapeck-dox medium in tray reactors. Enzymatic activities cellulase, xylanase, polyphenol oxidase, ellagitannase, tannase, β-glucosidase and α-L-arabinofuranosidase were tested, and ellagic acid was quantified. The microwave/ultrasound allowed the extraction of seven ellagitannins where the major compound was geraniin. SSF allows the biodegradation of geraniin into ellagic acid, and ellagitannase was the enzyme with the highest value (25.49 U/L) at the times of maximum accumulation of ellagic acid (6–12 h of fermentation), indicating that this enzyme is directly associated to the process of biodegradation. Finally, the maximum titles of this enzymatic activity (353.27 U/L) were found at fermentation time of 42 h and RE concentration of 22.5 g/L.