Allylic Hydrogen Atoms Research Articles

Intermolecular Aza-Wacker Coupling of Alkenes with Azoles by Photo-Aerobic Selenium-π-Acid Multicatalysis.

Herein, the intermolecular, photoaerobic aza-Wacker coupling of azoles with alkenes by means of dual and ternary selenium-π-acid multicatalysis is presented. The title method permits an expedited avenue toward a broad scope of N-allylated azoles and representative azinones under mild conditions with broad functional group tolerance, as is showcased in more than 60 examples including late-stage drug derivatizations. From a regiochemical perspective, the protocol is complementary to cognate photoredox catalytic olefin aminations, as they typically proceed through either allylic hydrogen atom abstraction or single electron oxidation of the alkene substrate. These methods predominantly result in C-N bond formations at the allylic periphery of the alkene or the less substituted position of the former π-bond (i.e., anti-Markovnikov selectivity). The current process, however, operates through a radical-polar crossover mechanism, which solely affects the selenium catalyst, thus allowing the alkene to be converted strictly through an ionic two-electron transfer regime under Markovnikov control. In addition, it is shown that the corresponding N-vinyl azoles can also be accessed by sequential or one-pot treatment of the allylic azoles with base, thus emphasizing the exquisite utility of this method.

The tandem catalysis of porous CoW composite oxide: Intensified allylic oxidation of cyclohexene to 2-cyclohexene-1-one

The controllable oxidation of the allylic CH bond has great academic and industrial value. Different Co/W ratios of CoW composite oxides were prepared using hydrothermal method and used in the allylic oxidation reaction of cyclohexene containing unstable allylic hydrogen atoms and carbon-carbon double bonds. The relationship between the structure of active sites and catalytic performance was revealed using characterization techniques such as XRD, N2 adsorption/desorption, SEM, TEM, FT-IR, UV–vis, and XPS. The results indicated that the Co(II)/Co(III) sites effectively mediate the first step of the entire oxidation reaction system, which generates hydroxyl radicals and peroxyl radicals through the activation of H2O2 to achieve chain initiation. Subsequently, the cyclohexene underwent a series of chain migration reactions under the action of hydroxyl radicals and peroxyl radicals, resulting in the formation of 2-cyclohexen-1-one and 2-cyclohexen-1-ol. Finally, 2-cyclohexen-1-ol interacted with W(VI) sites to form 2-cyclohexen-1-one via an alcohol-coordinated hydroxyl intermediate. The tandem oxidation reaction of cyclohexene allylic oxidation and 2-cyclohexen-1-ol dehydrogenation was realized by the CoW synergistic catalytic. The synergy between Co and W sites, composed of Co-O-W units on the surface of the CoW oxide with porous channel features, was elucidated. The experimental results showed that under the optimal conditions, using CoW composite oxide (Co/W = 1:1) as the catalyst, a 79.8% conversion rate of cyclohexene was achieved with 93.9% selectivity for the allylic products, among which the selectivity for 2-cyclohexen-1-one was 73.8%.

From electronic structure to model application of key reactions for gasoline/alcohol combustion: Hydrogen-atom abstraction by CH3OȮ radicals

Hydrogen atom abstraction by methyl peroxy (CH3OȮ) radicals can play an important role in gasoline/ethanol interacting chemistry for fuels that produce high concentrations of methyl radicals. Detailed kinetic reactions for hydrogen atom abstraction by CH3OȮ radicals from the components of FGF-LLNL (a gasoline surrogate) including cyclopentane, toluene, 1-hexene, n-heptane, and isooctane have been systematically studied in this work. The M06–2X/6–311++G(d,p) level of theory was used to obtain the optimized structure and vibrational frequency for all stationary points and the low-frequency torsional modes. The 1-D hindered rotor treatment for low-frequency torsional modes was treated at M06–2X/6–31G level of theory. The UCCSD(T)-F12a/cc-pVDZ-F12 and QCISD(T)/CBS level of theory were used to calculate single point energies for all species. High pressure limiting rate constants for all hydrogen atom abstraction channels were performed using conventional transition state theory with unsymmetric tunneling corrections. Individual rate constants are reported in the temperature range from 298.15 to 2000 K. Our computed results show that the abstraction of allylic hydrogen atoms from 1-hexene is the fastest at low temperatures. When the temperature increases, the hydrogen atom abstraction reaction channel at the primary alkyl site gradually becomes dominant. Thermodynamics properties for all stable species and high-pressure limiting rate constants for each reaction pathway obtained in this work were incorporated into the latest gasoline surrogate/ethanol model to investigate the influence of the rate constants calculated here on model predicted ignition delay times.

Density Functional Theory Guide for an Allyl Monomer Polymerization Mechanism: Photoinduced Radical-Mediated [3 + 2] Cyclization.

Polymerization of allyl ether monomers has previously been considered a free-radical addition polymerization mechanism, but it is difficult to achieve because of the high electron density of their double bond. To interpret the mechanism of photopolymerization, we therefore proposed a radical-mediated cyclization (RMC) reaction, which has been validated by results from quantum chemistry calculations and real-time infrared observation. Our RMC reaction begins with the radical abstracting one allylic hydrogen atom from the methylene group of allyl ether to generate an allyl ether radical with a delocalized π33 bond. Then, the radical reacts with the double bond of a second allyl ether molecule to form a five-membered cyclopentane-like ring (CP) radical. The CP radical abstracts a hydrogen atom from a third ether molecule. At last, a new allyl ether radical is generated and the next circulation as chain propagation begins. The distortion/interaction model was employed to explore the transient state of reaction, and real-time infrared was chosen to clarify the RMC reaction mechanism initiated by different photoinitiators. These results demonstrated that the RMC mechanism can give new insights into these fundamental processes.

Effect of acrylonitrile content of acrylonitrile butadiene rubber on mechanical and thermal properties of dynamically vulcanized poly(lactic acid) blends

AbstractWe report here the morphology, thermal and tensile properties of poly(lactic acid) (PLA) blends composed of acrylonitrile butadiene rubber (NBR) with different acrylonitrile contents with/without dynamic vulcanization by dicumyl peroxide (DCP). The interfacial tension of PLA and NBR measured by contact angle measurement decreased as the acrylonitrile content of NBR decreased. Likewise, SEM images showed that the rubber particle size reduced with decreasing acrylonitrile content owing to the stronger interfacial adhesion between the PLA matrix and NBR domains. Incorporation of DCP at 1.0 phr for dynamic vulcanization led to higher crosslink density and, in turn, optimal tensile strength and tensile toughness as a result of the action of PLA‐NBR copolymer as a reactive compatibilizer. The dynamic vulcanization of the blends containing low acrylonitrile NBR gave the most improved tensile properties because the free radicals from DCP decomposition preferentially attacked the allylic hydrogen atoms or double bonds of the butadiene backbone. Accordingly, more NBR macroradicals were generated and probably more PLA‐NBR copolymers were produced. Moreover, further addition of DCP at 2.0 phr provided a large amount of crosslinked NBR gel, which significantly degraded the tensile properties. From the DSC results, dynamic vulcanization lowered the cold crystallization temperature, implying an improvement of cold crystallization. Finally, TGA results showed a higher degradation temperature as a function of DCP content, which suggested that thermal stability increased due to stronger interfacial adhesion as well as higher gel content. © 2019 Society of Chemical Industry

The Autoxidation of Alkenyl Succinimides—Mimics for Polyisobutenyl Succinimide Dispersants

Short chain alkenyl succinimides (ASIs) were synthesized and used as high purity chemical models to investigate the autoxidative degradation at 170 °C of polyisobutenyl succinimide dispersants (PIBSIs), a significant additive in automotive engine lubricants. Degradation products were characterized by gas chromatography–electron ionization mass spectrometry and quantified by gas chromatography-flame ionization detection. The rate of autoxidation of ASIs in a model lubricant, squalane, was also investigated. Although this is a complex molecule containing many possible sites of radical attack, all of the autoxidation products identified result from attack at the double bond or the adjacent allylic hydrogen atoms, which indicates the controlling influence of the double bond in the degradation of alkenyl succinimides, and therefore of commercial polyisobutenyl succinimide dispersants. The observed site-selective cleavage of the ASI structure, and by analogy PIBSI dispersants, would yield products that both reduce dispersancy and promote the formation of insoluble products that could have a detrimental effect on lubricant performance.

Chemoselectivity in the Oxidation of Cycloalkenes with a Non-Heme Iron(IV)-Oxo-Chloride Complex: Epoxidation vs. Hydroxylation Selectivity

We report and analyze chemoselectivity in the gas phase reactions of cycloalkenes (cyclohexene, cycloheptene, cis-cyclooctene, 1,4-cyclohexadiene) with a non-heme iron(IV)-oxo complex [(PyTACN)Fe(O)(Cl)]+, which models the active species in iron-dependent halogenases. Unlike in the halogenases, we did not observe any chlorination of the substrate. However, we observed two other reaction pathways: allylic hydrogen atom transfer (HAT) and alkene epoxidation. The HAT is clearly preferred in the case of 1,4-cyclohexadiene, both pathways have comparable reaction rates in reaction with cyclohexene, and epoxidation is strongly favored in reactions with cycloheptene and cis-cyclooctene. This preference for epoxidation differs from the reactivity of iron(IV)-oxo complexes in the condensed phase, where HAT usually prevails. To understand the observed selectivity, we analyze effects of the substrate, spin state, and solvation. Our DFT and CASPT2 calculations suggest that all the reactions occur on the quintet potential energy surface. The DFT-calculated energies of the transition states for the epoxidation and hydroxylation pathways explain the observed chemoselectivity. The SMD implicit solvation model predicts the relative increase of the epoxidation barriers with solvent polarity, which explains the clear preference of HAT in the condensed phase.

Rate coefficients of reactions of 1-chlorocyclopentene with tropospheric oxidants at 298 K

The reactions of 1-chlorocyclopentene with tropospheric oxidants, Cl, OH and O3 are studied to measure the rate coefficients at 298 K and 800 Torr of N2 using the relative rate method with butene, cyclopentene and butane as references. The concentrations of the organics are measured by Gas Chromatograpy technique. The measured average rate coefficient values of kCl, kOH and kO3 (in cm3 molecule−1 s−1) are (3.51 ± 1.26) x 10−10, (5.97 ± 1.08) x 10−11 and (1.50 ± 0.19) x 10−17, respectively. In addition, the rate coefficient for reaction of OH with 1-chlorocyclopentene at 298 K and 30 Torr was also measured using an absolute method of laser photolysis-laser induced fluorescence technique, and the kOH value is found to be (6.01 ± 0.70) x 10−11 cm3 molecule−1 s−1. The stable products formed during the reaction of Cl, OH and O3 initiated oxidation of the 1-chlorocyclopentene in presence of air are characterized by GCMS. The abstraction and addition products are identified among them, the latter are found to be major products. The experimental results are supported by molecular orbital calculations, and abstraction of the allylic hydrogen atoms is predicted to be the major abstraction channel. Calculations predict the preferential addition of chlorine atom to the carbon atom of the unsaturation center not having Cl attached to it. The rate coefficients of 1-chlorocyclopentene are compared with that of cyclopentene and substituted cyclopentene to understand the effect of substituent Cl on the reactivity. The measured rate coefficients have been used to calculate tropospheric lifetime of the compound to be 316, 2 and 26 h for Cl, OH and O3, respectively. Based on these values, the major degradation pathway of 1-chlorocyclopentene is suggested to be its reaction with OH. Atmospheric impact of these molecules is local as tropospheric lifetime (τ) < 2 h. Using the tropospheric lifetime of 1-chlorocyclopentene, and its IR absorption cross-section in tropospheric IR window and under the assumption of a well mixed atmosphere, the radiative forcing of 1-chlorocyclopentene was estimated to be 22.41 mWm−2 ppb−1, and the global warming potentials for 20 and 100 years time horizon were calculated to be 0.01 and 0.003, respectively.

One-Carbon Oxidative Annulations of 1,3-Enynes by Catalytic C-H Functionalization and 1,4-Rhodium(III) Migration.

Rhodium(III)-catalyzed C-H functionalization-oxidative annulations of aromatic substrates with 1,3-enynes that contain allylic hydrogen atoms cis to the alkyne are described. The key step in these reactions is an alkenyl-to-allyl 1,4-rhodium(III) migration to give electrophilic π-allylrhodium(III) species. Nucleophilic trapping of these species gives heterocycles such as benzopyrans, isobenzofuranones, and isoindolinones.

Synergistic hollow CoMo oxide dual catalysis for tandem oxygen transfer: Preferred aerobic epoxidation of cyclohexene to 1,2-epoxycyclohexane

The CoMo hollow bimetallic oxide has been exploited in the aerobic epoxidation of cyclohexene containing labile allylic hydrogen atoms using ethylbenzene as a solvent. Cooperativity between Co(II) and Mo(VI) sites consisting of CoOMo or Mo−Oδ−⋯Coδ+ unit on hollow oxide surfaces is investigated for controlling preferred epoxidation catalysis via tandem oxygen transfer. Various characterization techniques like XRD diffraction, N2 physisorption, TEM, and Raman, XPS, Infrared, and UV–vis spectroscopies are employed to reveal the relationship between structure of active sites and catalytic performance. Together with these comprehensive experimental and computational studies, in this unique tandem catalytic process, Co(II) sites effectively mediate the first step of the overall oxidation cycle yielding a phenylethylperoxy radical by oxygen activation [Co(II) to Co(III) O2− to phenylethyl radical and finally to a phenylethylperoxy radical]. On the other hand, Mo(VI) sites are shown to be the excellent catalytic species for the subsequent epoxidation step by the transfer of oxygen atom of the phenylethylperoxy radical to cyclohexene. Hence, a 59% epoxidation selectivity with 33% cyclohexene conversion is accomplished through the required combination of Co(II) and Mo(VI) (2:1), allowing to tune epoxidation efficiency toward higher driving forces (relative to oxygenation of allylic hydrogen atom). This remarkably different catalytic performances between Co(II) and Mo(VI) can be attributed to the stronger overall polarization ability of Mo(VI) toward σ* OO orbital of the OO unit derived from its d-type orbitals, which helps the donor-acceptor interactions with the double bond.

The Distant Double Bond Determines the Fate of the Carboxylic Group in the Dissociative Photoionization of Oleic Acid.

The valence threshold photoionization of oleic acid has been studied using synchrotron VUV radiation and imaging photoelectron photoion coincidence (iPEPICO) spectroscopy. An oleic acid aerosol beam was impacted on a copper thermodesorber, heated to 130 °C, to evaporate the particles quantitatively. Upon threshold photoionization, oleic acid produces the intact parent ion first, followed by dehydration at higher energies. Starting at ca. 10 eV, a large number of fragment ions slowly rise suggesting several fragmentation coordinates with quasi-degenerate activation energies. However, water loss is the dominant low-energy dissociation channel, and it is shown to be closely related to the unsaturated carbon chain. In the lowest-barrier process, one of the four allylic hydrogen atoms is transferred to the carboxyl group to form the leaving water molecule and a cyclic ketone fragment ion. A statistical model to analyze the breakdown diagram and measured rate constants yields a 0 K appearance energy of 9.77 eV, which can be compared with the density functional theory result of 9.19 eV. Alternative H-transfer steps yielding a terminal C=O group are ruled out based on energetics and kinetics arguments. Some of the previous photoionization mass spectrometric studies also reported 2 amu and 26 amu loss fragment ions, corresponding to hydrogen and acetylene loss. We could not identify such peaks in the mass spectrum of oleic acid.

Exploiting Benzophenone Photoreactivity To Probe the Phospholipid Environment and Insertion Depth of the Cell-Penetrating Peptide Penetratin in Model Membranes.

Penetratin (RQIKIWFQNRRMKWKK) enters cells by different mechanisms, including membrane translocation, thus implying that the peptide interacts with the lipid bilayer. Penetratin also crosses the membrane of artificial vesicles, depending on their phospholipid content. To evaluate the phospholipid preference of penetratin, as the first step of translocation, we exploited the benzophenone triplet kinetics of hydrogen abstraction, which is slower for secondary than for allylic hydrogen atoms. By using multilamellar vesicles of varying phospholipid content, we identified and characterized the cross-linked products by MALDI-TOF mass spectrometry. Penetratin showed a preference for negatively charged (vs. zwitterionic) polar heads, and for unsaturated (vs. saturated) and short (vs. long) saturated phospholipids. Our study highlights the potential of using benzophenone to probe the environment and insertion depth of membranotropic peptides in membranes.

Exploiting Benzophenone Photoreactivity To Probe the Phospholipid Environment and Insertion Depth of the Cell‐Penetrating Peptide Penetratin in Model Membranes

AbstractPenetratin (RQIKIWFQNRRMKWKK) enters cells by different mechanisms, including membrane translocation, thus implying that the peptide interacts with the lipid bilayer. Penetratin also crosses the membrane of artificial vesicles, depending on their phospholipid content. To evaluate the phospholipid preference of penetratin, as the first step of translocation, we exploited the benzophenone triplet kinetics of hydrogen abstraction, which is slower for secondary than for allylic hydrogen atoms. By using multilamellar vesicles of varying phospholipid content, we identified and characterized the cross‐linked products by MALDI‐TOF mass spectrometry. Penetratin showed a preference for negatively charged (vs. zwitterionic) polar heads, and for unsaturated (vs. saturated) and short (vs. long) saturated phospholipids. Our study highlights the potential of using benzophenone to probe the environment and insertion depth of membranotropic peptides in membranes.

Exploring the impacts of the vinylogous anomeric effect on the synchronous early and late transition states of the hydrogen molecule elimination reactions of cis-3,6-dihalocyclohexa-1,4-dienes

LC-ωPBE, B3LYP, and M06-2X methods with the 6–311+G** basis set on all atoms and natural bond orbital (NBO) interpretation were performed to investigate the roles and contributions of the effective factors on the potential energy surfaces of the hydrogen molecule elimination reactions of cyclohexa-1,4-diene (1) and its cis-3,6-dihalo derivatives [halogen=F (2), Cl (3), Br (4)] to hydrogen molecule and their corresponding aromatic rings. The ring puckering in compound 2 (which results from the repulsive electrostatic interactions between the natural bond orbital dipole moments of two C-F bonds) shortens the allylic hydrogen atoms’ distance, leading to the smaller barrier height in compound 2 compared to that in compound 1. The barrier heights of the hydrogen molecule elimination reactions increase from compounds 2 to 4 while their corresponding exothermic characters decrease. The variations of the advancements of transition state structures (δB av) reveal that the hydrogen molecule elimination reactions of compounds 2–4 do not obey the Hammond-Leffler postulate. In compound 2, the ring puckering shortens the allylic hydrogen distance (d H8-H10) while d H8-H10 values increase going from compounds 2 to 4, leading to the increase of their corresponding hydrogen molecule elimination reactions barrier heights. Interestingly, the variations of the vinylogous hyperconjugative anomeric effects justify the directions of the rings puckering going from compounds 2 to 4. The increase of the activation exchange components [PETR (TS)-PETR (GS)] going from compounds 2 to 4 correlates well with their corresponding hydrogen molecule elimination process barrier heights.

Effect of Cα-Cβ Bond Type on the Radical Scavenging Activity of Hydroxy Stilbenes: Theoretical Insights in the Gas and Liquid Phase.

Density functional theory/Becke's three-parameter hybrid functional combined with the Lee-Yang-Parr correlation functional (DFT/B3LYP) was used to examine the radical scavenging potential of resveratrol, piceatannol, and their dehydro/dihydro counterparts. For this reason, the values of molecular descriptors predicting the hydrogen atom transfer (HAT) and the single electron transfer preceding (SET-PT) or following a proton transfer (SPLET) were computed in the gas and liquid (benzene, water) phases. The double bond, resulting in molecular planarity, was predicted to favor the single hydrogen or electron transfer. The triple bond, resulting in a linear backbone, was predicted to decrease the ease of these transfers, whereas the saturation, resulting in loss of planarity, was expected to decrease the activity even more. The impact of saturation was predicted to be detrimental for resveratrol. However, for piceatannol, an enhancement of activity was proposed only under stepwise HAT because allylic hydrogen atoms could be prone for abstraction after the formation of quinone. The predictions (gas, liquid phase) were in agreement with experimental evidence for resveratrol and its derivatives. The lipophilicity, which may affect antioxidant activity in real systems, increased according to partition coefficient (log P) values as follows: dihydrostilbene > stilbene > dehydrostilbene. On the basis of dipole moment values, no clear trend was observed.

Chemical Kinetics of Hydrogen Atom Abstraction from Allylic Sites by 3O2; Implications for Combustion Modeling and Simulation.

Hydrogen atom abstraction from allylic C-H bonds by molecular oxygen plays a very important role in determining the reactivity of fuel molecules having allylic hydrogen atoms. Rate constants for hydrogen atom abstraction by molecular oxygen from molecules with allylic sites have been calculated. A series of molecules with primary, secondary, tertiary, and super secondary allylic hydrogen atoms of alkene, furan, and alkylbenzene families are taken into consideration. Those molecules include propene, 2-butene, isobutene, 2-methylfuran, and toluene containing the primary allylic hydrogen atom; 1-butene, 1-pentene, 2-ethylfuran, ethylbenzene, and n-propylbenzene containing the secondary allylic hydrogen atom; 3-methyl-1-butene, 2-isopropylfuran, and isopropylbenzene containing tertiary allylic hydrogen atom; and 1-4-pentadiene containing super allylic secondary hydrogen atoms. The M06-2X/6-311++G(d,p) level of theory was used to optimize the geometries of all of the reactants, transition states, products and also the hinder rotation treatments for lower frequency modes. The G4 level of theory was used to calculate the electronic single point energies for those species to determine the 0 K barriers to reaction. Conventional transition state theory with Eckart tunnelling corrections was used to calculate the rate constants. The comparison between our calculated rate constants with the available experimental results from the literature shows good agreement for the reactions of propene and isobutene with molecular oxygen. The rate constant for toluene with O2 is about an order magnitude slower than that experimentally derived from a comprehensive model proposed by Oehlschlaeger and coauthors. The results clearly indicate the need for a more detailed investigation of the combustion kinetics of toluene oxidation and its key pyrolysis and oxidation intermediates. Despite this, our computed barriers and rate constants retain an important internal consistency. Rate constants calculated in this work have also been used in predicting the reactivity of the target fuels of 1-butene, 2-butene, isobutene, 2-methylfuran, 2,5-dimethylfuran, and toluene, and the results show that the ignition delay times for those fuels have been increased by a factor of 1.5-3. This work provides a first systematic study of one of the key initiation reaction for compounds containing allylic hydrogen atoms.

DFT study of radical scavenging activity of sesame oil lignans and selected in vivo metabolites of sesamin

DFT calculation of various molecular descriptors was carried out in order to examine the radical scavenging properties of sesame oil lignans and some selected metabolites of sesamin formed in vivo. The major sesame oil lignans, namely sesamin and sesamolin may present antioxidant activity through hydrogen atom transfer, though lacking a phenolic group. This can be achieved via the contribution of allylic hydrogen atoms according to C–H bond dissociation enthalpy (BDE) values. Even so, the predicted activity is not higher than that of some phenolic derivatives (e.g. pinoresinol) or metabolites bearing catechol moieties. The contribution of non-phenolic hydrogen atoms may result in the formation of planar or semi-planar conjugated compounds. Some of the tested lignans (e.g. sesaminol, sesamolinol) may be efficient electron donors comparable to active flavonoids according to ionization potential (IP) values. Neutral sesamol can be an efficient electron donor rather than hydrogen atom donor according to IP and net electrophilicity values. Only computation in water could partially justify literature experimental findings on the higher reactivity of sesamol over that of sesamin. The metabolites of sesamin, bearing one or two catechol groups were found as the most efficient hydrogen atom donors and most prone to ionization. Therefore, they could be capable to act efficiently via hydrogen atom transfer (HAT) or sequential proton loss electron transfer (SPLET) in real systems as shown by gas-phase and calculations in solvents (benzene, water). Thus, these metabolites may account for the high in vivo antioxidant activity of sesamin. Examination of the succeeding products of metabolism indicated the progressive loss of radical scavenging efficiency which was predicted to be negligible in the compounds excreted from the body of mammals.

Radical scavenging activity characterization of synthetic isochroman-derivatives of hydroxytyrosol: A gas-phase DFT approach

Hydroxytyrosol (HT) and a set of synthetic isochroman derivatives of HT have been studied with regards to their radical scavenging activity in the gas employing density functional theory (DFT) and the Becke's 3 Lee Yang Parr (B3LYP) functional. Values of molecular descriptors (bond dissociation enthalpy, BDE; ionization potential, IP; proton dissociation enthalpy, PDE; proton affinity, PA; electron transfer energy, ETE; electron accepting power, ɷ+; electron donating power, ɷ−; net electrophilicity, Δɷ±) characterizing the hydrogen atom or electron donating efficiency of test compounds were used. Published experimental findings for the radical scavenging activity of the same compounds using methods such as Rancimat, 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) radical cation and oxygen radical absorbance capacity were discussed. All the synthetic isochromans were predicted to be more potent hydrogen atom and electron donors than HT, though polarity may affect their performance in lipidic systems. Present findings point out that HT and examined isochromans prefer to scavenge free radicals via hydrogen atom transfer instead of electron donation and that allylic hydrogen atoms are expected to account for a higher activity in comparison to other phenolic antioxidants. The most potent hydrogen atom donor was the one bearing two catechol groups which can form stepwise a di-quinone and then scavenge additional radicals via allylic hydrogen atom donation and subsequent adduct formation. The total enthalpy required for all hydrogen atoms donated by test compounds was the most appropriate index of experimental activity prediction instead of common descriptors.

The role of peroxyl radicals in polyester degradation--a mass spectrometric product and kinetic study using the distonic radical ion approach.

Mass spectrometric techniques were used to obtain detailed insight into the reactions of peroxyl radicals with model systems of (damaged) polyesters. Using a distonic radical ion approach, it was shown that N-methylpyridinium peroxyl radical cations, Pyr(+)OO˙, do not react with non-activated C-H bonds typically present in polyesters that resist degradation. Structural damage in the polymer, for example small amounts of alkene moieties formed during the manufacturing process, is required to enable reaction with Pyr(+)OO˙, which proceeds with high preference through addition to the π system rather than via allylic hydrogen atom abstraction (kadd/kHAT > 20 for internal alkenes). This is due to the very fast and strongly exothermic subsequent fragmentation of the peroxyl-alkene radical adduct to epoxides and highly reactive Pyr(+)O˙, which both could promote further degradation of the polymer through non-radical and radical pathways. This work provides essential experimental support that the basic autoxidation mechanism is a too simplistic model to rationalize radical mediated degradation of polymers under ambient conditions.

Mechanism of Hop-Derived Terpenes Oxidation in Beer

Terpenes are the main constituents of hops essentiol oil and contribute to the singular sensory properties of beer. However, terpenes are sensitive to oxidation leading to quality loss during beer aging. Herein, the reactivity of terpenes towards 1-hydroxyethyl radical has been determined employing a competitive kinetic approach using the spin-trap α-(4-pyridyl-1-oxide)- N-tert-butylnitrone (4-POBN). The apparent rate constant (kapp) for the reaction of terpenes with 1-hydroxyethyl radical ranges from (3.9 ± 0.2) × 105 to (1.5 ± 0.2) × 107 L mol−1 s−1 for β-pinene and terpinolene, respectively. The reaction involves hydrogen atom transfer from the terpene to 1-hydroxyethyl radical rather than electron-transfer and the rate constant is shown to be dependent on the number of allylic and benzylic hydrogen atoms and on the value of the bond dissociation enthalpy for the weakest C−H bond. The results provide a better understanding on the mechanism behind terpene decomposition in beer brewing and aging process and may further contibute to improve the oxidative stability of the herb-flavored beverages.