Allyl Research Articles

Synthesis and Porous Structure Characteristics of Allyl Methacrylate/Divinylbenzene Polymers

A set of six porous copolymers of allyl methacrylate (AllMeth) and divinylbenzene (DVB), containing 5 to 50 wt% of the latter crosslinker, are synthesized by suspension polymerization method in the presence of inert diluents. Obtained polymers have various specific surface areas—those with 20 to 50 wt% of DVB have a high surface area in the range of 410–480 m2/g, depending only slightly on the amount of the aromatic crosslinker. Specific surface area decreases strongly only when DVB content is 15 and 5 wt%. That is the feature that is unusual for crosslinked polymers and indicates the participation of allyl groups in making a novel polymeric network of high porosity. All polymers contain polar carbonyl groups, with an electron pair able to interact with polar sorbates. Polymers are characterized using elemental analysis, FTIR, and their porous structure is characterized by nitrogen adsorption at 77 K. All polymers contain residual allyl groups, which possibly can serve as convenient points for chemical modification, allowing for the future synthesis of specialty polymers (such as ion-exchangers and coordinating resins).

A convenient strategy for mitigating microplastics in wastewater treatment using natural light and ZnO nanoparticles as photocatalysts: A mechanistic study

Polypropylene microplastics (PPMPs) are one of the major emerging contaminants in the ecosystem due to their frequent usage and improper disposal practices. These PPMPs enter ecosystems via wastewater effluent plants and cause severe environmental health issues. In addition, quantifying PPMPs smaller than 50 μm in wastewater plant extraction is very difficult. Thus, the current study was designed to mitigate the PPMPs using zinc oxide nanoparticles (ZnONPs) as a photocatalyst under sunlight. The photocatalytic reaction was examined using spectroscopic techniques and microscopic imaging. The findings indicated that the weight loss percentage of PPMPs increased, and a decrease in UV–Vis DRS peak intensities was observed. The spectroscopic results elucidated the formation of free radicals, which affect the PPMPs and lead to the formation of carbonyl, allylic, and unsaturated groups. Further, EDS reports clarified that there is increased oxygen content due to the photooxidation process and the disintegration of the polymer chain owing to decreased carbon levels. Overall, ZnO photocatalyst absorbs photons from the visible spectrum of sunlight and forms free radicals, which affect the PPMPs to initiate polymer deterioration. Also, the current study revealed the mechanistic pathway of PPMP degradation under the photocatalytic reaction as proposed in the results obtained above.

Catalytic pyrolysis mechanism of lignin moieties driven by aldehyde, hydroxyl, methoxy, and allyl functionalization: the role of reactive quinone methide and ketene intermediates.

The catalytic pyrolysis of guaiacol-based lignin monomers, vanillin, syringol, and eugenol over commercial HZSM-5 has been investigated using operando Photoelectron Photoion Coincidence (PEPICO) spectroscopy to unveil the reaction mechanism by detecting reactive intermediates, such as quinone methides and ketenes, and products. Vanillin shares the decomposition mechanism with guaiacol due to prompt and efficient decarbonylation, which allows us to control this reaction leading to a phenol selectivity increase by switching to a faujasite catalyst and decreasing the Si/Al ratio. Syringol first demethylates to 3-methoxycatechol, which mainly dehydroxylates to o- and m-guaiacol. Ketene formation channels over HZSM-5 are less important here than for guaiacol or vanillin, but product distributionremains similar. C3 addition to guaiacol yields eugenol, which shows a more complex product distribution upon catalytic pyrolysis. By analogies to monomers with simplified functionalization, namely allylbenzene, 4-allylcatechol, and 4-methylcatechol, the eugenol chemistry could be fully resolved. Previously postulated reactive semi-quinone intermediates are detected spectroscopically, and their involvement opens alternative pathways to condensation and phenol formation. Allyl groups, produced by dehydroxylation of the β-O-4 bond, may not only decompose via C1/C2/C3 loss, but also cyclize to indene and its derivatives over HZSM-5. This comparably high reactivity leads to an unselective branching of the chemistry and to a complex product distribution, which is difficult to control. Indenes and naphthalenes are also prototypical coke precursors efficiently deactivating the catalyst. We rely on these mechanistic insights to discuss strategies to fine-tune process conditions to increase the selectivities of desired products by enhancing either vanillin and guaiacol or supressing eugenol yields from native lignin.

Mechanism and Origins of Nucleophile‐Controlled Regioselectivity of Palladium‐Catalyzed Allylic C−H Amination of 1,4‐Dienes: A Computational Study

AbstractDensity functional theory calculations have been conducted to investigate the palladium‐catalyzed allylic C−H amination of 1,4‐dienes with commonly available amines. The computations indicate that the reaction begins with the allylic C−H bond cleavage through the concerted proton and two‐electron transfer process to forge the η3‐allyl Pd(II) species. The ensuing C−N bond formation was found to be highly dependent on the basicity of the nucleophile, enabling the regioselectivity switch upon change of the nucleophile. With the weakly basic aromatic amine, the reaction occurs through the hydrogen‐bonding enabled inner‐sphere nucleophilic attack pathway. The distance between the reacting carbon atom and the terminal carbon atom is responsible for the Z/E‐selectivity. The regioselectivity is primarily due to steric repulsion between the allyl group and the ligand. On the other hand, the outer‐sphere nucleophilic attack pathway is favored for the reaction with the more basic aliphatic cyclic amine. The change of the coordinating mode of the allylic moiety was found to play a crucial role in determining the regioselectivity.

Mechanism Insights into Allylic Hydroxylation versus Epoxidation of Propene Catalyzed by Model Catalyst Iron Phthalocyanine in the Presence of Hydrogen Peroxide.

High-valent metal-oxo species are key reactive intermediates in many biological and biological oxidation reactions. Herein, allylic hydroxylation (C-H) versus epoxidation (C═C) reactions of propene with a model catalyst iron phthalocyanine (FePc) in the presence of hydrogen peroxide were investigated contrastively, aiming to probe the active intermediates, structure-activity relationship, and reaction pathways. Our results showed that H2O2 as an oxygen-donor reagent can be easily decomposed on FePc to produce key active intermediates O═FePc and O═FePc═O with the energy barriers of 19.57 and 23.89 kcal/mol, respectively. In the selective oxidation of propene, O═FePc has a small preference for C═C epoxidation over C-H hydroxylation while O═FePc═O has a small preference for C-H hydroxylation. Since the electron-withdrawing O axial ligand in O═FePc═O further increases the radical character (Fe-O·) and Fe-O bond length of the iron-oxo moiety, O═FePc═O has better catalytic performance in both C═C epoxidation and C-H hydroxylation than O═FePc. Furthermore, in the whole reaction processes, the dual-hydrogen bonds between the two terminal H atoms of the alkene and allylic groups of propene and oxygen atom of the iron-oxo moiety would lead to the reaction toward C═C epoxidation while the single-hydrogen bond between the terminal H atom of the allylic group and the oxygen atom of the iron-oxo moiety would lead to the reaction toward C-H hydroxylation, implying that the weakly interacting hydrogen bonds affecting oxidation pathways also play a very important role in the regioselectivity of C═C epoxidation and C-H hydroxylation.

Tailoring Hydrogel Sheet Properties through Co-Monomer Selection in AMPS Copolymer Macromers.

This study investigates hydrogels based on 2-Acrylamido-2-methyl-1-propanesulfonic acid sodium salt (AMPS) copolymers, incorporating N-hydroxyethyl acrylamide (HEA) and 3-sulfopropyl acrylate potassium salt (SPA). The addition of HEA and SPA is designed to fine-tune the hydrogels' water absorption and mechanical properties, ultimately enhancing their characteristics and expanding their potential for biomedical applications. A copolymer of AMPS, 2-carboxyethyl acrylate (CEA) combined with methacrylic acid (MAA) as poly(AMPS-stat-CEA-stat-MAA, PACM), was preliminarily synthesized. CEA and MAA were modified with allyl glycidyl ether (AGE) through ring-opening, yielding macromers with pendant allyl groups (PACM-AGE). Copolymers poly(AMPS-stat-HEA-stat-CEA-stat-MAA) (PAHCM) and poly(AMPS-stat-SPA-stat-CEA-stat-MAA) (PASCM) were also synthesized and modified with AGE to produce PAHCM-AGE and PASCM-AGE macromers. These copolymers and macromers were characterized by 1H NMR, FT-IR, and GPC, confirming successful synthesis and functionalization. The macromers were then photocrosslinked into hydrogels and evaluated for swelling, water content, and mechanical properties. The results revealed that the PASCM-AGE hydrogels exhibited superior swelling ratios and water retention, achieving equilibrium water content (~92%) within 30 min. While the mechanical properties of HEA and SPA containing hydrogels show significant differences compared to PACM-AGE hydrogel (tensile strength 2.5 MPa, elongation 47%), HEA containing PAHCM-AGE has a higher tensile strength (5.8 MPa) but lower elongation (19%). In contrast, SPA in the PASCM-AGE hydrogels led to both higher tensile strength (3.7 MPa) and greater elongation (92%), allowing for a broader range of hydrogel properties. An initial study on drug delivery behavior was conducted using PACM-AGE hydrogels loaded with photosensitizers, showing effective absorption, release, and antibacterial activity under light exposure. These AMPS-based macromers with HEA and SPA modifications demonstrate enhanced properties, making them promising for wound management and drug delivery applications.

Silver-π Interaction: A Diverse Approach to Hybrid Material and Its Efficacy in Electrocatalytic Reduction of Nitrate to Ammonia.

Inspired by the intriguing nature of the metal-π interaction in organometallic chemistry, a novel 1D hybrid material has been designed. Herein, a functionalized tellurium allyl macrocycle (TAM) acts as a molecular building block and is knit together via silver-π interaction to obtain Ag-TAM. Ag is coordinated to two allyl groups and a phenyl ring in η2 mode. Instead of the conventional polymerization strategy, a metal-π interaction is employed to interlink macrocycles. TAM and Ag-TAM showed electrocatalytic capability for the conversion of nitrate to ammonia. Ag-TAM showed an NH3 yield rate 2-fold greater than TAM with a high faradaic efficiency of 94.6% with good durability, proving that interlinking of macrocycles via metal-π interaction improves the catalytic activity. Detailed periodic density functional theory (DFT) calculations unveil novel mechanistic insights, suggesting cooperative catalysis between neighboring Ag sites and contributing to the enhanced efficiency.

The hydrosilylation of allyl-modified terpenoids and malonates – New biogenic silane coupling agents for “Green Tire” production

A robust method for the synthesis of new bio-based silane coupling agents (SCAs) by iridium-catalyzed hydrosilylation of naturally-occurring terpenoids and malonates modified with allyl groups is described. Iridium catalyst promotes regio- and chemoselective addition of triethoxysilane to allyl moieties in the presence of di- and trisubstituted C=C bonds, leading to the exclusive formation of β-silylated products. The application of easily accessible and cheap terpenoid substrates in place of fossil fuel sources complies with the Agenda 2030 for Sustainable Development, established by the United Nations. All synthesized bifunctional silanes were fully characterized by spectroscopic methods. Obtained products formed a new class of SCAs based on raw materials of natural origin. They showed potential as effective, biogenic SCAs for the preparation of silica-reinforced styrene-butadiene composites with improved essential parameters (rolling resistance, dry handling predictors, and elongation at break) for the production of “Green Tires” characterized by lower fuel consumption and increased driving safety.

Substituent-Controlled Copper-Catalyzed Trifluoromethylation of 1,7-Dienes: Synthesis of Mono- and Bis-trifluoromethylated Benzoxepines.

A copper-catalyzed trifluoromethylation of benzene-linked 1,7-dienes with 1-trifluoromethyl-1,2-benziodoxole via a radical cascade cyclization process for the synthesis of mono- and bis-trifluoromethylated benzoxepines is developed. The selectivity depends on substituents on the double bond of the allyl group in 1,7-dienes. The large-scale operation and late-stage functionalization of bioactive molecules reveal the promising utility of this protocol.

Asymmetric radical allylation of β-keto esters with vinyl cyclopropanes by dual photoredox/nickel catalysis

Asymmetric radical allylation of β-keto esters with vinyl cyclopropanes by dual photoredox/nickel catalysis

Recent advances in vegetable oil based fine chemicals and polymers

Vegetable oil as a kind of renewable resource has been considered as promising raw material to replace petrochemical resources. This article focuses on several highly reactive sites of triglycerides, including carbon-carbon double bonds, allyl groups, and ester groups. The vegetable oil-based platform monomers/polymers with different structures and functions are obtained via chemical modification such as epoxidation, ozone decomposition, hydroformylation, transesterification and thiolene. Vegetable oil-based chemicals mainly include polyols, biodiesel fuels, lubricants and plasticizers, and vegetable oil-based polymers mainly include inks, coatings and polyurethane foams. This paper summarizes and analyzes the review of vegetable oil-based chemicals and polymers in various industries, and puts forward the prospect for their future applications.

Cytotoxic and Anti-HSV-1 Effects of Caulerpin Derivatives.

Marine organisms represent a potential source of secondary metabolites with various therapeutic properties. However, the pharmaceutical industry still needs to explore the algological resource. The species Caulerpa lamouroux Forssk presents confirmed biological activities associated with its major compound caulerpin, such as antinociceptive, spasmolytic, antiviral, antimicrobial, insecticidal, and cytotoxic. Considering that caulerpin is still limited, such as low solubility or chemical instability, it was subjected to a structural modifications test to establish which molecular regions could accept structural modification and to elucidate the cytotoxic bioactive structure in Vero cells (African green monkey kidney cells, Cercopithecus aethiops; ATCC, Manassas, VA, USA) and antiviral to Herpes simplex virus type 1. Substitution reactions in the N-indolic position with mono- and di-substituted alkyl, benzyl, allyl, propargyl, and ethyl acetate groups were performed, in addition to conversion to their acidic derivatives. The obtained analogs were submitted to cytotoxicity and antiviral activity screening against Herpes simplex virus type 1 by the tetrazolium microculture method. From the semi-synthesis, 14 analogs were obtained, and 12 are new. The cytotoxicity assay showed that caulerpin acid and N-ethyl-substituted acid presented cytotoxic concentrations referring to 50% of the maximum effect of 1035.0 µM and 1004.0 µM, respectively, values significantly higher than caulerpin. The antiviral screening of the analogs revealed that the N-substituted acids with methyl and ethyl groups inhibited Herpes simplex virus type 1-induced cytotoxicity by levels similar to the positive control acyclovir.

Density functional theory guide for copolymerization mechanism between allyl radical with radicalophile: photo-driven radical mediated [3 + 2] cyclization.

The challenge of activating inert allyl monomers for polymerization has persisted, prompting our proposal of the photo-driven radical mediated [3 + 2] cyclization reaction (PRMC). This innovative approach significantly expedites the homopolymerization of multi-allyl monomers, enabling the synthesis of embolic microspheres for hepatocellular carcinoma interventions. PRMC involves allyl monomers to form allylic radicals and then radicals participating in a cycloaddition reaction with unsaturated olefins as radicalophiles to form cyclopentane-based radical products. While extensively studied in the theoretical and experimental homopolymerization, PRMC's application in copolymerization remains unexplored. To address this knowledge gap, we explored the elementary reaction, selecting allyl methyl ether radicals (AMER) and α,β-unsaturated ketones as radicalophiles for copolymerization investigations by density functional theory (DFT) analysis. We quantified energy differences between ground and excited states of reactants, elucidated frontier molecular orbitals, and assessed thermodynamic data for copolymerization feasibility. We also evaluated the electronic properties of reactants, predicting the reactivity of radicalophiles and the interactions of intermolecular reactions. Additionally, we applied transition state theory and interaction/deformation models and conducted a local orbital analysis to comprehensively study excess electron distribution and gyration radius of cyclic radical product. Our findings offer vital insights into PRMC's potential in copolymerization. This research provides a robust theoretical foundation for practical application, enhancing the polymerization field. Based on density functional theory (DFT), the calculations were performed at the M06-2X/6-311 + + G(d,p) level in/by Gaussian 16 package. Subsequently, our analytical results apply time-dependent density-functional theory (TD-DFT) and solvent modeling (SMD). Single-point energy calculations determine the driving force behind the radicals' reaction with radicalophiles. Furthermore, we assessed the electrostatic potential (ESP) of the reactants. The results of the calculations were visualized by the Multiwfn 3.6 and VMD 1.9 programs.

Ether-Diol Ambiguity: An Inconspicuous Issue in the Structure Elucidation of Oxygenated Natural Products.

Tertiary and allylic hydroxyl groups readily eliminate water during positive ion mode mass spectrometry and may show similar NMR spectra to their corresponding ethers. In a routine structure elucidation workflow, these factors can cause researchers to incorrectly assign diol moieties as ethers or vice versa, leading to inaccurate chemical structures. After facing this problem during our work on oxygenated sesquiterpenoids from a Fusarium sp. fungal strain, we became aware of this challenging issue. We examined the literature for oxygenated natural products bearing these functional groups, and with the aid of density functional calculations of NMR chemical shifts, we now report the structures of 15 natural products that should be revised. We further establish that derivatizing sub-micromolar amounts of alcohols to their sulfates can be used to distinguish these from their corresponding ethers using liquid chromatography negative ion mode mass spectrometry. Finally, we isolated lignoren/cyclonerodiol from the Fusarium sp. culture extract and supported its revised identity as cyclonerodiol using this sulfation approach. Our results suggest that ether-diol ambiguity could be a prevalent issue affecting the structure elucidation of oxygenated natural products and highlight the importance of using complementary techniques, such as sulfation with LC-(-)-ESI-MS or density functional calculations of NMR chemical shifts.

Targeting next-generation PDE4 inhibitors in search of potential management of rheumatoid arthritis and psoriasis

Immune-mediated inflammatory diseases (IMIDs) comprise a broad spectrum of conditions characterized by systemic inflammation affecting various organs and tissues, for which there is no known cure. The isoform-specific inhibition of phosphodiesterase-4B (PDE4B) over PDE4D constitutes an effective therapeutic strategy for the treatment of IMIDs that minimizes the adverse effects associated with non-selective PDE4 inhibitors. Thus, we report a new class of isoquinolone derivatives as next-generation PDE4 inhibitors for effective management of rheumatoid arthritis (RA) and psoriasis. Among the series, 8 compounds i.e. 1e, 1l, 1m, 1n, 1o, 2m, 2o and 3o showed promising PDE4B inhibition (>80 %) in vitro with IC50 ∼ 1.4–6.2 µM. The compound 1l was identified as an initial hit and was pursued for further studies. According to structure–activity relationship (SAR), an allyl group at C-4 position improved PDE4B inhibition. The correlation between in vitro activity data and binding affinities obtained via molecular docking suggested that the high-affinity binding to PDE4B is a prerequisite for the effective inhibition of PDE4B. Notably, the hit 1l showed selectivity towards PDE4B over PDE4D in vitro. Furthermore, 1l treatment (30 mg/kg) in the adjuvant-induced arthritis (AIA) rat model induced by complete Freund’s adjuvant (CFA) demonstrated anti-arthritic potential via ameliorating paw swelling and body weight, narrowing joint space, reducing excessive immune cells infiltration and pannus formation in addition to reducing mRNA expression of pro-inflammatory cytokines such as TNF-α and IL-6 in synovial tissues of experimental rats. Additionally, 1l reduced the hyper-proliferative state and colony forming potential of IMQ-induced psoriatic keratinocytes. The treatment of these cells with 1l markedly reduced the protein levels of Ki67 and mRNA levels of pro-inflammatory cytokines e.g. IL-17A and TNF-α suggesting its potent anti-psoriatic potential. Furthermore, 1l did not show any significant adverse effects when evaluated in a systematic toxicity (e.g. teratogenicity, hepatotoxicity and cardiotoxicity) studies in zebrafish at the tested concentrations (1–100 µM) and the NOAEL (no-observed-adverse-effect level) was found to be 100 µM. Thus, with promising anti-inflammatory effects both in vitro and in vivo along with PDE4B selectivity with an acceptable safety margin, 1l emerged as a new and promising inhibitor for further studies.

Efficient Dienyl End‐Capping of Ruthenium Catalyzed Ring Opening Metathesis Polymerization with Allyl Compounds through Base‐Promoted Metallacyclobutane Decomposition

AbstractHerein we demonstrate an effective and facile end‐capping technique for ring‐opening metathesis polymerization (ROMP) using readily available allyl compounds as a new type of terminating agents. This new type of end‐capping reactions, which are based on the base‐promoted decomposition of ruthenocyclobutane intermediates, introduce diene moiety onto the chain end of ROMP polymers while simultaneously deactivating the ruthenium complex. These termination reactions are highly efficient, typically completing within 1 minute at 0 °C with >95 % end‐capping fidelity.

Efficient Dienyl End-Capping of Ruthenium Catalyzed Ring Opening Metathesis Polymerization with Allyl Compounds through Base-Promoted Metallacyclobutane Decomposition.

Herein we demonstrate an effective and facile end-capping technique for ring-opening metathesis polymerization (ROMP) using readily available allyl compounds as a new type of terminating agents. This new type of end-capping reactions, which are based on the base-promoted decomposition of ruthenocyclobutane intermediates, introduce diene moiety onto the chain end of ROMP polymers while simultaneously deactivating the ruthenium complex. These termination reactions are highly efficient, typically completing within 1 minute at 0 °C with >95 % end-capping fidelity.

Thermal decomposition of alkenes: role of allylic C-C bond cleavage

Thermal decomposition of alkenes is critical in many chemical processes. In the alkene moiety, allylic CC bonds are significantly weaker than alkylic and vinylic CC bonds. To address literature discrepancies in the rate of allylic CC bond cleavage, the current work investigates the thermal decomposition of two prototype molecules, namely 1-hexene (k1) and 4-methyl-1-pentene (k2). The formation of product allyl radicals is tracked using a highly sensitive UV laser diagnostic to determine the rate coefficients of k1 and k2 over 1178–1359 K in a shock tube. Both reactions exhibit a positive Arrhenius temperature dependence, with the decomposition of 4-methyl-1-pentene occurring 1.5–3 times faster than that of 1-hexene. Values of k1 adopted in literature models vary by an order of magnitude.By integrating our previous measurements of 1-butene and 1-pentene decomposition (Zhou et al., 2024), this work establishes a comprehensive set of rate rules that encompasses the decomposition of allylic-primary (P), allylic-secondary (S21 and S22), and allylic-tertiary (T) CC bonds. At 1200 K, the decomposition of a tertiary allylic CC bond (kT) occurs 42 times faster than that of the primary CC bond (kP). Notably, our established rate rules caution against commonly adopted analogies between the rate coefficients of the thermal decomposition of 1-butene and 1-pentene, as kS21 proceeds 3–7 times faster than kP.The implementation of these rate rules in various kinetic models of alkenes and biofuels greatly enhances the accuracy of their predictions. This work thus contributes to a deeper understanding of the mechanisms underlying soot formation during from the combustion of unsaturated fuels.

Oxygen concentration regulated the efficient liquefaction of vulcanized natural rubber

Oxidative liquefaction represents a promising avenue for the homogeneous and high-value utilization of waste tire rubber. Given that truck tires predominantly comprise natural rubber (NR), this study investigated the efficient liquefaction of vulcanized NR regulated by oxygen concentration. Remarkably, the liquefaction of vulcanized NR was realized with an oxygen concentration of 75 % at 200 °C within 3 min. FTIR spectroscopy showed that carbonyl, ether and sulphoxide groups were produced during the liquification of NR vulcanizates. Oxygen concentration significantly affected the oxidative efficiency of both the main chains and crosslinks, with a more pronounced effect observed on the main chains. Nevertheless, the similar molecular weights and polydispersity indices across various degraded products suggested a selective oxidative cleavage of the NR backbone. Furthermore, online ATR-FTIR was used to monitor the dynamic changes of NR's molecular structure to elucidate the oxidative degradation mechanism. The oxidative cleavage of NR main chain primarily occurred at the C-C bonds connected with allyl groups, producing oxidized products enriched with conjugated carbonyl groups. Alternatively, the main chain scission may also occur due to the electronic rearrangement effect of the C=C bond and produce saturated carbonyl groups. Oxygen concentration modulated the degradation efficiency of vulcanized NR, which provided an efficient strategy for the upcycling of NR-based waste tires.

Profiles of volatile sulfur compounds in various vegetables consumed in Korea using HS-SPME-GC/MS technique.

Volatile sulfur compounds (VSCs) are not only important for their therapeutic potential but also significantly influence the flavor profiles of agricultural products. VSCs exhibit various chemical structures due to their stability and volatility, and they may form or be altered as a result of enzymatic and chemical reactions during storage and cooking. This study has focused on profiles of VSCs in 58 different vegetable samples by using HS-SPME-GC/MS technique and chemometric analyses. The validation was carried out using cabbage juice as a vegetable matrix for VSCs analysis, showing satisfactory repeatability (RSD 8.07% ~ 9.45%), reproducibility (RSD 4.22% ~ 7.71%), accuracy and specificity. The established method was utilized on various vegetables, revealing that 21 VSCs such as sulfides, disulfides, trisulfides, isothiocyanates, sulfhydryls, and thiophenes were successfully identified and quantified. These compounds were found in a range of vegetables including Allium species, Cruciferae, Capsicum species, green leafy vegetables, and mushrooms. In particular, isocyanate and allyl groups were abundant in Cruciferae and Allium vegetables, respectively. Cooking conditions were shown to reduce the levels of certain sulfur compounds such as dimethyl sulfide and dimethyl trisulfide in vegetables like broccoli and cabbage, suggesting that heat treatment can lead to the volatilization and reduction of these compounds. The present study provides reliable insights into the compositions of VSCs in various vegetables and examines the changes induced by different cooking methods.