Allylic Substituents Research Articles

A General and Scalable Method toward Enantioenriched C2-Substituted Azetidines Using Chiral tert-Butanesulfinamides.

Diverse ranges of chiral nitrogen-containing heterocycles serve as a molecular toolbox for modulating a wide array of biological processes, but enantioenriched production of smaller chiral heterocycles is a bottleneck. There is a lack of general approaches for the stereoselective preparation of chiral 4-membered monocyclic C2-substituted azetidines, where many routes to different substitution types are possible, but no simple and common approach exists. To bridge this gap, inexpensive and widely available chiral tert-butanesulfinamides are harnessed for chiral induction with 1,3-bis-electrophilic 3-chloropropanal, providing a three-step approach to C2-substituted azetidines with aryl, vinyl, allyl, branched alkyl, and linear alkyl substituents. Eleven azetidine products are produced, and the approach is shown to be effective on a gram-scale with a single purification of the protected azetidine product in 44% yield over three steps in an 85:15 diastereomeric ratio. In most cases, the diastereomers are separable using normal phase chromatography, often resulting in previously elusive enantiopure azetidine products. Protected azetidines were shown to undergo rapid and efficient sulfinamide cleavage, producing an azetidine hydrochloride salt that was subjected to derivatization reactions, highlighting the method's applicability to medicinal chemistry approaches.

Intramolecular Nucleophilic Vinylic Substitution (SNV) by Carbon Nucleophiles: Conformationally Directed Formation of Dienes from N,N'-Diallyl Ureas.

Nucleophilic vinylic substitution (SNV) by carbon nucleophiles allows the formation of vinylic C-C bonds without transition metal catalysts. In this paper, we show that tethering two alkenes together through a urea linkage can lead to the formation of a diene by an intramolecular SNV reaction. The starting materials are fully substituted N,N'-diallyl ureas; the reaction proceeds in the presence of base, and entails a cascade of deprotonations, reprotonations, and an SNV reaction of an allylic carbanion on a rare electrophile: a vinylic urea. As a result, two allylic substituents couple to form a diene, despite the fact that neither is activated towards electrophilic attack. The reaction is tolerant of significant steric bulk, and exhibits regioselectivity with unsymmetrical diallyl ureas: β-substituted allyl groups invariably behave as nucleophiles, while electrophilic behavior may be enforced by the use of an E-vinylic urea substituent that cannot be deprotonated under the reaction conditions.

Ferrocenyl carborane conjugates with allyl functionalities: Synthesis and properties

A series of novel hybride ferrocene carborane derivatives containing allyl functionalities at the carborane carbon atoms were firstly synthesized in a good yield providing their potential applications in various fields of material science. Synthesized compounds were characterized using various spectroscopic techniques like IR, ESI-MS, 1H and 11B NMR data. Some compounds were investigated by cyclic voltammetry. The total charge density around each atom was calculated for 1-allyl-9-ferrocenylmethyl-m-carborane. Particular attention has been focused on the analysis of 1H NMR spectra of diallyl-substituted ferrocene carboranes which made it possible to discover the migration of the double bond in allyl substituent and the formation along with diallyl derivative of the corresponding allylpropenyl isomer compounds.

Reactivity and isomerization of tert-butyldiallylphosphine with Os3 metallic cluster: Insights into the reaction mechanism and plausible intermediates through spectroscopic evidence and computational calculations

The reaction of tert‑butyldiallylphosphine with [Os3(CO)10(CH3CN)2] give the compounds [Os3(CO)11{κ(P)-tBuP(CH2CHCH2)2}] 1a, [Os3(CO)11{κ(P)-tBuP(CHCHCH3)2}] 1b, [Os3(CO)10{κ(P)-tBuP(CH2CHCH2)2}2] 2, diastereoisomers [Os3(CO)10{µ:η2-κ3(P,C2,C3)-tBuP(CH2CHCH2)2}] (3a Sp, 3b Rp) and [Os3(CO)9{µ:η2-κ3(P,C2,C3)-tBuP(CH2CHCH2)2)(κ(P)-tBuP(CH2CHCH2)2}] (4a Sp, 4b Rp). Thermolysis of 2 or 3 gave the complexes [Os3(CO)8(μ-H){μ3:η1:η2:η2-κ5(P,C2,C3,C5,C6)-P(CH2CHCH2)(CH2CCH2)}] 5 and diastereoisomers [Os3(CO)8(µ-H)2{µ3:η1:η1:η2-κ3(P,C2,C3)-tBuP(CH2CHCH2)(CCHCH2)}] (6a Sp, 6b Rp). 1a, 1b, 3a, 5 and 6a which were characterized by X-ray analysis. To the best of our knowledge, 1b is the first characterized structure involving isomerization of the double bond of the allylic substituent at room temperature in the case of metallic clusters. X-ray coordinates were used to study the possible reaction mechanisms through computational calculations at the MN15L/def2svp level of theory, obtaining good agreement between experimental and computational results.

Cycloaddition reactions of heterocyclic azides with 2-cyanoacetamidines as a new route to C,N-diheteroarylcarbamidines.

A novel and efficient base-catalyzed, transition-metal-free method for the synthesis of diheterocyclic compounds connected by an amidine linker, including apart from the common 1,2,3-triazole ring, either an additional pyrimidinedione, 4-nitroimidazole, isoxazole, 1,3,4-triazole, 2-oxochromone or thiazole ring, has been developed. The process was facilitated by a strong base and includes the cycloaddition reaction of 3,3-diaminoacrylonitriles (2-cyanoacetamidines) to heterocyclic azides followed by a Cornforth-type rearrangement to the final products. The reaction is tolerant to various N-monosubstituted 3,3-diaminoacrylonitriles and to different heterocyclic azides. The developed method has a broad scope and can be applied to obtain a variety of N-heteroaryl-1,2,3-triazole-4-carbimidamides with alkyl, allyl, propargyl, benzyl, cycloalkyl, and indolyl substituents at the N1 position .

Ionic plastic crystals and ionic liquids containing quaternary cations with alkenyl substituents: chemical phase transformations by bromine vapor

Quaternary ammonium salts with vinyl or allyl substituents were synthesized, which underwent bromine addition reactions under bromine vapor, resulting in transformations between ionic plastic crystals, ionic liquids, and ordinary ionic crystals.

Selective Functionalization of Carbonyl Closo-Decaborate [2-B10H9CO]- with Building Block Properties via Grignard Reagents.

A green, fast and selective approach for the synthesis of mono-substituted closo-decaborate derivatives [2-B10H9COR]2- has been established via a nucleophilic addition reaction between the carbonyl derivative of closo-decaborate [2-B10H9CO]- and the corresponding Grignard reagent RMgX, where R is the ethyl, iso-propyl, pentyl, allyl, vinyl and propynyl groups. This approach is accomplished under mild conditions with 70-80% yields. The significance of these derivative is their ability to constitute building blocks for polymeric integration via the allyl, vinyl and propynyl substituents. All products were characterized by 11B, 1H and 13C NMR, elemental analysis and mass spectrometry.

Structure-Activity Relationship Studies on 6-Chloro-1-phenylbenzazepines Leads to the Identification of a New Dopamine D1 Receptor Antagonist.

The 1-phenylbenzazepine template has yielded a number of D1R-like ligands, which, though useful as pharmacological tools, have significant drawbacks in terms of selectivity versus D5R as well as pharmacokinetic behavior. A number of 1-phenylbenzazepines contain a 6-chloro functional group, but extensive SAR studies around the 6-chloro-1-phenylbenzazepine framework have not been reported in the literature. To further understand the tolerance of the 6-chloro-1-phenylbenzazepine template for various substituent groups towards affinity and selectivity at D1R, we synthesized two series of analogs with structural variations at the C-7, C-8, N-3, C-3' and C-4' positions. The series 2 analogs differed from series 1 analogs in possessing a nitrogenated functionality at C-8 and lacked a C-4' substituent, but were otherwise similar. Analogs were assessed for affinity at D1R, D2R and D5R. For both series, we found that the analogs lacked affinity for D2R and showed modest D1R versus D5R selectivity. For series 1 analogs, an N-3 methyl substituent group was better tolerated than N-H or an N-3 allyl substituent. The C-8 position appears to be tolerant of amino and methanesulfonamide substituents for high D1R affinity, but C-8 amides displayed low to moderate D1R affinities. A C-3' methyl substituent appeared to be critical for the D1R affinity of some analogs, but the C-4' substituents tried (hydroxy and methoxy; series 1) did not result in any significant boost in D1R affinity. Compound 15a was the most potent and selective D1R ligand identified from these studies (Ki at D1R = 30 nM; 6-fold selectivity versus D5R). Further functional activity assessments indicate that 15a functions as a D1R antagonist towards cAMP-mediated signaling. The predicted drug-like properties of 15a are encouraging for further pharmacological assessments on the compound.

Tandem Cycloaddition of Azides to 3,3-Diaminoacrylonitriles (2-Cyanoacetamidines) and Cornforth-Type Rearrangement as an Approach to 5-Amino-1,2,3-triazole-4-N-substituted Imidamides.

An efficient base-catalyzed, metal-free method for the synthesis of 5-amino-1,2,3-triazole-4-N-sulfonyl- and arylimidamides, directed by the structure of the amidine group, has been developed. It is based on a previously unknown tandem process involving cycloaddition reaction to 3,3-diaminoacrylonitriles (2-cyanoacetamidines) with aryl(alkyl)sulfonyl or aryl azides and Cornforth-type rearrangement. During the reaction optimization, different factors were found to facilitate the title reaction, which include the use of a strong base and N-mono- or N,N'-disubstituted 3,3-diaminoacrylonitriles. The reaction is tolerant to variously N-monosubstituted and N,N'-disubstituted 3,3-diaminoacrylonitriles and to various aryl- and aryl/alkyl sulfonyl azides. The developed method has a broad scope and can be applied to obtain a variety of 5-amino-1,2,3-triazole-4-carbimidamides bearing at the N1 position alkyl, allyl, propargyl, benzyl, cycloalkyl, and heteroaryl substituents and sulfonyl and aryl substituents at the amidine group. Post-cyclization reactions of prepared 5-amino-1,2,3-triazoles with DMF-DMA DMA-DMF leads to 1,2,3-triazolo[4,5-d]pyrimidines, 8-aza purine analogues demonstrating the applicability of the prepared compounds in organic synthesis.

C(21)-fluorinated thevinol scaffold for opioid ligands. 21,21,21-Trifluoro-6-O-nororvinols: Design, synthesis and analgesic activity

Thevinols and their 3-O-demethylated relatives, orvinols, are derivatives of the Diels-Alder adduct of natural alkaloid thebaine with methyl vinyl ketone. Taken together, thevinols and orvinols constitute an important family of opioid receptor (OR) ligands playing an important role in both the OR mediated antinociception and OR antagonism. Herein, we disclose for the first time the OR activity of orvinols fluorinated within the pharmocophore associated with C(20) and its surrounding along with a dependence of the activity profile on the substituent at N(17). Starting from thevinone and 18,19-dihydrothevinone, a family of C(21)-fluorinated orvinols bearing methyl, cyclopropylmethyl (CPM), and allyl substituent at N(17) was synthesized. The fluorinated compounds were evaluated for OR activity. The orvinols bearing three fluorine atoms at C(21) were found to retain the properties of OR ligands and their activity profile depends on the substituent at N(17). Pilot in vivo experiments in a model of acute pain (tail-flick test in mice) revealed that 6-O-desmethyl-21,21,21-trifluoro-20-methylorvinol at doses 1.0–10.0 mg/kg (s.c.) exhibits analgesic activity at the level of morphine for a duration of 30–180 min. Its N(17)-CPM counterpart demonstrated the partial opioid agonist properties. The N(17)-allyl substituted derivative showed no analgesic activity. In vivo evaluation of an analgesic activity indicates that 21,21,21-trifluoro-20-methylorvinols represent a novel family of OR ligands related to buprenorphine, diprenorphine, etc. These compounds are promising for the structure-activity relationship studies among the thevinol/orvinol series as well as for a search for new OR ligands with potentially valuable pharmacological profiles.

Design, Synthesis and Antimicrobial Properties of New Tetracyclic Quinobenzothiazine Derivatives.

A new method for modifying the structure of tetracyclic quinobenzothiazinium derivatives has been developed, allowing introduction of various substituents at different positions of the benzene ring. The method consists of reacting appropriate aniline derivatives with 5,12-(dimethyl)thioquinantrenediinium bis-chloride. A series of new quinobenzothiazine derivatives was obtained with propyl, allyl, propargyl and benzyl substituents in 9, 10 and 11 positions, respectively. The structure of the obtained compounds was analyzed by 1H and 13C NMR (HSQC, HMBC) and X-ray analysis. All the compounds were tested against reference strains Staphylococcus aureus ATCC 29213 and Enterococcus faecalis ATCC 29212, and representatives of multidrug-resistant clinical isolates of methicillin-resistant S. aureus (MRSA) and vancomycin-resistant E. faecalis (VRE). In addition, all the compounds were evaluated in vitro against Mycobacterium smegmatis ATCC 700084 and M. marinum CAMP 5644. 9-Benzyloxy-5-methyl-12H-quino [3,4-b][1,4]benzothiazinium chloride (6j), 9-propoxy-5-methyl-12H-quino[3,4-b][1,4]benzothiazinium chloride (6a) and 9-allyloxy-5-methyl-12H-quino[3,4-b][1,4]benzothiazinium chloride (6d) demonstrated high activity against the entire tested microbial spectrum. The activities of the compounds were comparable with oxacillin, tetracycline and ciprofloxacinagainst staphylococcal strains and with rifampicin against both mycobacterial strains. Compound 6j had a significant effect on the inhibition of bacterial respiration as demonstrated by the MTT assay. The compounds showed not only bacteriostatic activity, but also bactericidal activity. Preliminary in vitro cytotoxicity screening of the compounds performed using normal human dermal fibroblasts (NHDF) proved that the tested compounds showed an insignificant cytotoxic effect on human cells (IC50 > 37 µM), making these compounds interesting for further investigation. Moreover, the intermolecular similarity of novel compounds was analyzed in the multidimensional space (mDS) of the structure/property-related in silico descriptors by means of principal component analysis (PCA) and hierarchical clustering analysis (HCA), respectively. The distance-oriented structure/property distribution was related with the experimental lipophilic data.

SYNTHESIS OF SALTS OF N-ALLYLTRICHLOROACETAMIDINIUM HEXAHALOGENOTELLURATE

Amidines with a trichloromethyl group exhibit the properties of inotropic agents, which are used as scaffolds in synthesizing aza-hete­rocycles and ligands for complex formation. Functionalized amidines show anticancer, and antidiabetic activity, and are antihypertensive and antiparasitic agents. The synthesis of new functional derivatives of such amidines is definitely an urgent task. The introduction of an alkenyl substituent and several nucleophilic centers in the amidine creates prerequisites for electrophilic cyclization. This work aims to study the reactions of N-allyl-N-methyl-N'-(trimethylsilyl)-2,2,2-trichloroethanimidamide with tellurium halides.
 The starting N-allyl-N-methyl-N'-(trimethylsilyl)-2,2,2-trichloroethanimidamide was synthesized from N-allyl-N-methyl-­2,2,2-­trichloroethanimidamide by the action of trimethylsilyl chloride in the presence of triethylamine base. The reaction of N-­allyl-­N-methyl-N'-(trimethylsilyl)-2,2,2-trichloroethanimidamide with tellurium dioxide in hydrohalic acid was carried out while cooling to 0°C. Elemental analysis confirms that the electrophilic reagent is in its acidic form in the complex. The 1H NMR spectra of the obtained complexes indicate the absence of EVC - the spin pattern of the proton signals of the allylic substituent, characteristic of the starting compounds, is preserved, but the signals are shifted by 0.3–0.6 ppm. The absence of proton signals of the trimethyl salt substituent indicates the removal of imide protection under these conditions. The presence of a broade­ned singlet in a weak field indicates the pre­sence of acidic protons. Apparently, protonation does not take place on the alkenyl multiple bonds, but, presumably, on the imide nitrogen atom. Based on elemental analysis, the composition of the formed complex was determined: N-allyl-N-methyl-2,2,2-trichloroethanimidamidine: hexahalogenotelluric acid as 1:0.5, which contains 4 or 3 water molecules. So the interaction of N-allyl-N-methyl-N'-(trimethylsilyl)-2,2,2-trichloroethanimidamide with tellurium tetrahalides in a strongly acidic environment, tellurium- or proton-induced cyclization does not occur, but hexahalogeno­tellurate N-allyl-N-methyl-2,2,2-trichloro­etha­neimidamidinium regardless of the polarity of the solvent.

A Regio- and Diastereoselective Stille Coupling/Intramolecular Diels-Alder Cascade for the Generation of Fused Pyridines and Application in the Synthesis of (+)-Lycopladine A and (-)-Lycoposerramine R.

2-Pyrones with a chiral branched allylic silyl ether substituent underwent intramolecular Diels-Alder reactions with remarkably high π-facial- and endo-selectivities. The resulting diastereomerically and enantiomerically pure cycloadducts were transformed into the natural products (+)-lycopladine A and (-)-lycoposerramine R.

A Regio‐ and Diastereoselective Stille Coupling/Intramolecular Diels–Alder Cascade for the Generation of Fused Pyridines and Application in the Synthesis of (+)‐Lycopladine A and (−)‐Lycoposerramine R

2-Pyrones with a chiral branched allylic silyl ether substituent underwent intramolecular Diels–Alder reactions with remarkably high π-facial- and endo-selectivities. The resulting diastereomerically and enantiomerically pure cycloadducts were transformed into the natural products (+)-lycopladine A and (−)-lycoposerramine R.

Palladium-Catalyzed Asymmetric Trifluoromethylated Allylic Alkylation of Pyrazolones Enabled by α-(Trifluoromethyl)alkenyl Acetates

The first asymmetric trifluoromethylated allylic alkylation of pyrazolones using α-(trifluoromethyl)alkenyl acetates as a novel trifluoromethylated allylation reagent is described, affording various functionalized chiral pyrazolones containing a trifluoromethylated allyl substituent in high yields with excellent regio-/enantio-/diastereoselectivities. Mechanistically, the double-bond migration of α-(trifluoromethyl)alkenyl acetates in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene is initial and interesting step. More importantly, this study is of significance in providing a novel and widely applicable trifluoromethyl-containing allylation reagent.

Interaction of electron beam with ionic liquids and its application for micropatterning

The high-energy electrons can induce significant physicochemical changes in ionic liquids (ILs), of which polymerization and solidification are particularly interesting due to potential application in microstructures fabrication using electron beam (EB) patterning. However, the role of allyl and alkyl substituents of cation in these phenomena is not clear. Thus, we investigate the effect of electron dose on microscale polymerization of ammonium- and imidazolium-based ILs with different numbers of polymerizable groups. We show that the minimum electron dose for solidification decreases as the number of allyl substituents in cation is increased. Interestingly, ILs without polymerizable substituents are also solidified by EB irradiation. Consequently, we suggest that IL monomers undergo two mechanisms during EB exposure: free radical chain-growth polymerization via allyl groups and cross-linking between monomer/oligomer/polymer radicals. We also study the applicability of IL thin films for EB lithography in terms of sensitivity and contrast of resist material. Moreover, we demonstrate that suspended polymer structures, potentially attractive as photonic components, can be fabricated out of ILs using controlled-acceleration-voltage electron beam lithography (CAV-EBL). This method enables us to examine the effect of electron energy on the solidification depth in IL layer and, as a consequence, estimate the electron range for this material.

Evolution of Routes for Asymmetric Total Synthesis of Cyclocitrinol Enabled by Type II [5+2] Cycloaddition†

Main observation and conclusionThe asymmetric total synthesis of an unusual C25 steroid containing a unique bicyclo[4.4.1]undecene A/B ring system, resulting in the synthesis of cyclocitrinol (1) and its isomer Δ8,14‐cyclocitrinol (38), is reported. Initial attempts to construct the synthetically challenging bicyclo[4.4.1]undecene A/B ring system using a type II [5+2] cycloaddition showed that a chiral substituent at the allylic position of the alkene (C6, cyclocitrinol numbering) controlled the stereoselective outcome of the cycloaddition reaction. Late‐stage migration of the tetrasubstituted C8–C14 double bond in Δ8,14‐cyclocitrinol (38) to obtain cyclocitrinol (1) proved challenging, inspiring an alternative approach. The chiral β‐CH2OR group on the allylic substituent at C6 played a pivotal role both in controlling the diastereoselectivity of the type II [5+2] cycloaddition and retaining the C6 substituent under lithium–amine conditions.

Photoinduced selective hydrophosphinylation of allylic compounds with diphenylphosphine oxide leading to γ-functionalized P-ligand precursors

A series of bifunctional phosphine compounds promising as γ-functionalized phosphine ligand precursors are conveniently synthesized by the radical addition of diphenylphosphine oxide (Ph2P(O)H) to allylic compounds under photoirradiation. The photoinduced addition proceeds regioselectively in an anti-Markovnikov manner, and phosphines having hydroxy, alkoxy, aryloxy, acyloxy, and thio groups at the γ-position can be prepared by simple operation. Interestingly, novel continuous addition of Ph2P(O)H to two molecules of allylic ethers and related compounds is also observed, although their yields are moderate. The substituent and steric effects of the allylic substituents on the radical addition are discussed in detail.

Crystal structure, Hirshfeld surface analysis, inter-action energy and DFT studies of 4-[(4-allyl-2-meth-oxy-phen-oxy)meth-yl]-1-(4-meth-oxy-phen-yl)-1H-1,2,3-triazole.

In the title mol-ecule, C20H21N3O3, the allyl substituent is rotated out of the plane of its attached phenyl ring [torsion angle 100.66 (15)°]. In the crystal, C-HMthphn⋯OMthphn (Mthphn = meth-oxy-phen-yl) hydrogen bonds lead to the formation of (100) layers that are connected into a three-dimensional network by C-H⋯π(ring) inter-actions, together with π-π stacking inter-actions [centroid-to-centroid distance = 3.7318 (10) Å] between parallel phenyl rings. Hirshfeld surface analysis indicates that the most important contributions to the crystal packing are from H⋯H (48.7%) and H⋯C/C⋯H (23.3%) inter-actions. Computational chemistry reveals that the C-HMthphn⋯OMthphn hydrogen bond energy is 47.1 kJ mol-1. The theoretical structure, optimized by density functional theory (DFT) at the B3LYP/ 6-311 G(d,p) level, is compared with the experimentally determined mol-ecular structure. The HOMO-LUMO behaviour was elucidated to determine the energy gap.

A novel coumarin‐based fluorescent probe for selective detection of cysteine over homocysteine

AbstractA coumarin‐based fluorescent probe containing both acrylate moiety and an allyl substituent was developed for distinguishing cysteine from homocysteine. The maximum absorption wavelength of the probe showed a bathochromic shift upon addition of cysteine and the colour changed from colourless to yellow. The maximum fluorescence emission at 462 nm of the probe was dramatically enhanced upon addition of cysteine in aqueous solution. In HEPES buffer (pH = 7.4, EtOH/H2O = 9:1, v/v), both of the fluorescence emission bands of the probe at ca. 390 and 462 nm were intensely enhanced upon the addition of cysteine, while other amino acids, namely, homocysteine, asparaginic acid, methionine, glycine, phenylalaninase, valine, tryptophan, serine, glutamic acid and glutathione, did not cause a remarkable change. The probe can be used for selectively colorimetric and ratiometric fluorescent detection of cysteine over homocysteine and other common amino acids in both organic media and aqueous solution. The concentration of cysteine can be estimated by titration of the probe in aqueous solution, and the detection limit of the probe towards cysteine was 2 μmol/L.