Alloy Nanoclusters Research Articles

Satellite Pd Single-Atom Embraced AuPd Alloy Nanoclusters for Enhanced Hydrogen Evolution.

The fabrication of hybrid active sites that synergistically contain nanoclusters and single atoms (SAs) is vital for electrocatalysts to achieve excellent activity and durability. Herein, we develop a ligand-assisted pyrolysis strategy using nanoclusters (Au4Pd2(SC2H4Ph)8) with alloy cores and protected ligands to build AuPd cluster sites embraced by satellite Pd SAs. In the thermal drive control process, different thermodynamic properties of the alloy atoms and the confinement effects of organic ligands allow for the mild spillover of the single-component metal Pd, resulting in the formation of AuPd alloy nanoclusters tightly encompassed by isolated Pd atoms. Experiments and theoretical calculations indicated that the satellite Pd atoms can optimize the electronic structure of the AuPd nanoclusters and Au sites in the alloy to facilitate the adsorption and dissociation of H2O, thus enhancing the hydrogen evolution reaction (HER) activity. The optimal AuPdNCs/PdSAs-600 exhibits outstanding electrocatalytic activity toward HER, with overpotentials of 21 and 38 mV at 10 mA cm-2 in acidic and alkaline media, respectively. Moreover, the mass activity and turnover frequency of AuPdNCs/PdSAs-600 are one order of magnitude higher than those of commercial Pd/C and Pt/C catalysts. This facile strategy for constructing hybrid catalytic centers using ligand-protected nanoclusters provides efficient insights for the further design of nanocluster-based electrocatalysts synergized by SAs.

Mo Migration‐Induced Crystalline to Amorphous Conversion and Formation of RuMo/NiMoO4 Heterogeneous Nanoarray for Hydrazine‐Assisted Water Splitting at Large Current Density

AbstractManipulating the atomic structure of the catalyst and tailoring the dissociative water‐hydrogen bonding network at the catalyst‐electrolyte interface is essential for propelling alkaline hydrogen evolution reaction (HER) and hydrazine oxidation reaction (HzOR), but remains a great challenge. Herein, we constructed an advanced a‐RuMo/NiMoO4/NF heterogeneous electrocatalyst with amorphous RuMo alloy nanoclusters anchored to amorphous NiMoO4 skeletons on Ni foam by a heteroatom implantation strategy. Theoretical calculations and in situ Raman tests show that the amorphous and alloying structure of a‐RuMo/NiMoO4/NF not only induces the directional evolution of interfacial H2O, but also lowers the d‐band center (from −0.43 to −2.22 eV) of a‐RuMo/NiMoO4/NF, the Gibbs free energy of hydrogen adsorption (ΔGH*, from −1.29 to −0.06 eV), and the energy barrier of HzOR (ΔGN2(g)=1.50 eV to ΔGN2*=0.47 eV). Profiting from these favorable factors, the a‐RuMo/NiMoO4/NF exhibits excellent electrocatalytic performances, especially at large current densities, with an overpotential of 13 and 129 mV to reach 10 and 1000 mA cm−2 for HER. While for HzOR, it needs only −91 and 276 mV to deliver 10 and 500 mA cm−2, respectively. Further, the constructed a‐RuMo/NiMoO4/NF||a‐RuMo/NiMoO4/NF electrolyzer demands only 7 and 420 mV to afford 10 and 500 mA cm−2.

Atomically Precise Au24Pt(thiolate)12(dithiolate)3 Nanoclusters with Excellent Electrocatalytic Hydrogen Evolution Reactivity.

[Au24Pt(C6)18]0 (C6 = 1-hexanethiolate) is twice as active as commercial Pt nanoparticles in promoting the electrocatalytic hydrogen evolution reaction (HER), thereby attracting attention as new HER catalysts with well-controlled geometric structures. In this study, we succeeded in synthesizing two new Au-Pt alloy nanoclusters, namely, [Au24Pt(TBBT)12(TDT)3]0 (TBBT = 4-tert-butylbenzenethiolate; TDT = thiodithiolate) and [Au24Pt(TBBT)12(PDT)3]0 (PDT = 1,3-propanedithiolate), by exchanging all the ligands of [Au24Pt(PET)18]0 (PET = 2-phenylethanethiolate) with mono- or dithiolates. Although [Au24Pt(TBBT)12(TDT)3]0 was synthesized serendipitously, a similar cluster, [Au24Pt(TBBT)12(PDT)3]0, was subsequently obtained by selecting the appropriate reaction conditions and optimal combination of thiolate and dithiolate ligands. Single crystal X-ray diffraction analyses revealed that the lengths and orientations of -Au(I)-SR-Au(I)- staples in [Au24Pt(TBBT)12(TDT)3]0 and [Au24Pt(TBBT)12(PDT)3]0 were different from those in [Au24Pt(C6)18]0, [Au24Pt(PET)18]0, and [Au24Pt(TBBT)18]0, and these subtle differences were reflected in the geometric and electronic structures as well as the HER activities of [Au24Pt(TBBT)12(TDT)3]0 and [Au24Pt(TBBT)12(PDT)3]0. Accordingly, the HER activities of products [Au24Pt(TBBT)12(TDT)3]0 and [Au24Pt(TBBT)12(PDT)3]0 were, respectively, 3.5 and 4.9 times higher than those of [Au24Pt(C6)18]0 and [Au24Pt(TBBT)18]0.

Structure, morphology and magnetic performance of (Fe65Co35) x @(Ni0.5Zn0.5Fe2O4)100–x nanocomposite thin films

A bi-magnetic phase (Fe65Co35)x@(Ni0.5Zn0.5Fe2O4)100–x nanocomposite thin film was created by combining Fe65Co35 alloy nanoclusters produced through plasma gas condensation with Ni0.5Zn0.5Fe2O4 thin film prepared via RF magnetron sputtering. The study revealed that the Fe65Co35 alloy nanoclusters, with an average particle size of approximately 6 nm, are surrounded by the amorphous ferrite phase, forming a granular ‘core–shell’ structure. As the proportion of Fe65Co35 alloy nanoclusters increased from 5.9 wt% to 35.4 wt%, the grain size of the nanocomposite thin films decreased from 24 nm to 10.4 nm. Magnetic analysis demonstrated that the nanocomposite thin films displayed soft magnetic properties at room temperature. With an increase in Fe65Co35 content, the saturated magnetization of the nanocomposite thin films escalated from 68 emu cm−3 to 214 emu/cm3, significantly surpassing that of the corresponding NiZn ferrite films (∼17 emu/cm3). The fluctuation of coercivity is intricately linked to the grain size of the nanocomposite thin films, and at 24.5 wt% of Fe65Co35 alloy nanoclusters, the coercivity is minimized to 14 Oe. The ferromagnetic resonance spectra of the nanocomposite films exhibited some asymmetric broadening and shift. As the Fe65Co35 content increased, the resonance field initially decreased and then rose, while the resonance linewidth gradually decreased.

Investigation of low temperature amorphous (InxGa1−x)2O3 films modulated by indium content for optimization in solar-blind photodetector

In this study, bandgap engineering of amorphous (InxGa1-x)2O3 alloy films fabricated at room temperature using pulsed laser deposition and alloy targets with different indium contents from 0 % to 50 % have been investigated. The effect of indium content on the characteristics of (InxGa1-x)2O3 films and the performance of metal–semiconductor-metal solar-blind photodetectors have been explored in detail. The moderate number of indium atoms introduced into Ga2O3 can obtain a flat surface morphology and adjusted bandgap to enhance the performance of solar-blind photodetector. When the excessive indium atoms were incorporated into the film, the obviously In enriched (InxGa1-x)2O3 alloy nano-clusters are observed on the film surface despite of the low growth temperature. It can be attributed to the segregation phenomenon because of the solid solubility limitation for indium in Ga2O3. Both of dark current and photocurrent of (InxGa1-x)2O3 photodetector increase with the incremental indium content mainly attributed to enhanced oxygen deficiency. As a result, the solar-blind photodetector can achieve an optimal performance using a balanced indium content of 20 % with an extremely low dark current of 4.4 × 10-12 A, a responsivity of 10.8 mA/W, a substantial on/off current ratio of 1.5 × 104 and a short rise/decay time of 0.33 s/0.54 s.

Structural Isomerism in Bimetallic Ag20Cu12 Nanoclusters.

Structural isomers of atomically precise metal nanoclusters are highly sought after for investigating structure-property relationships in nanostructured materials. However, they are extremely rare, particularly those of alloys, primarily due to the challenges in their synthesis and structural characterization. Herein, for the first time, a pair of bimetallic isomeric AgCu nanoclusters has been controllably synthesized and structurally characterized. These two isomers share an identical molecular formula, Ag20Cu12(C≡CR)24 (denoted as Ag20Cu12-1 and Ag20Cu12-2; HC≡CR is 3,5-bis(trifluoromethyl)phenylacetylene). Single-crystal X-ray diffraction data analysis revealed that Ag20Cu12-1 possesses an Ag17Cu4 core composed of two interpenetrating hollow Ag11Cu2 structures. This core is stabilized by four different types of surface motifs: eight -C≡CR, one Cu(C≡CR)2, one Ag3Cu3(C≡CR)6, and two Cu2(C≡CR)4 units. Ag20Cu12-2 features a bitetrahedron Ag14 core, which is stabilized by three Ag2Cu4(C≡CR)8 units. Interestingly, Ag20Cu12-2 undergoes spontaneous transformation to Ag20Cu12-1 in the solution-state. Density functional theory calculations explain the electronic and optical properties and confirm the higher relative stability of Ag20Cu12-1 compared to Ag20Cu12-2. The controlled synthesis and structural isomerism of alloy nanoclusters presented in this work will stimulate and broaden research on nanoscale isomerism.

Synthesis of a Gold–Silver Alloy Nanocluster within a Ring‐Shaped Polyoxometalate and Its Photocatalytic Property

AbstractAlloying is an effective method for modulating metal nanoclusters to enrich their structural diversity and physicochemical properties. Recent investigations have demonstrated that polyoxometalates (POMs) can act as effective multidentate ligands for silver (Ag) nanoclusters to endow them with synergistic properties, reactivity, catalytic properties, and stability. However, the application of POMs as ligands has been confined predominantly to monometallic nanoclusters. Herein, we report a synthetic method for fabricating surface‐exposed gold (Au)−Ag alloy nanoclusters within a ring‐shaped POM ([P8W48O184]40−). Reacting an Ag nanocluster stabilized by the ring‐shaped POM with Au ions (Au+) was found to substitute several Ag atoms at the core of the nanocluster with Au atoms. The resultant {Au8Ag26} alloy nanocluster demonstrated superior photocatalytic activity and stability compared to the pristine Ag nanocluster in the aerobic oxidation of α‐terpinene under visible‐light irradiation. These findings provide fundamental insights into the formation and catalytic properties of POM‐stabilized alloy nanoclusters and advance exploration into the synthesis and applications of diverse metal nanoclusters.

Mo Migration-Induced Crystalline to Amorphous Conversion and Formation of RuMo/NiMoO4 Heterogeneous Nanoarray for Hydrazine-Assisted Water Splitting at Large Current Density.

Manipulating the atomic structure of the catalyst and tailoring the dissociative water-hydrogen bonding network at the catalyst-electrolyte interface is essential for propelling alkaline hydrogen evolution reactions (HER) and hydrazine oxidation reaction (HzOR), but remains a great challenge. Herein, we constructed an advanced a-RuMo/NiMoO4/NF heterogeneous electrocatalysts with amorphous RuMo alloy nanoclusters anchored to amorphous NiMoO4 skeletons on Ni foam by a heteroatom implantation strategy. Theoretical calculations and in-situ Raman tests show that the amorphous and alloying structure of a-RuMo/NiMoO4/NF not only induces the directional evolution of interfacial H2O, but also lowers the d-band center (from -0.43 to -2.22 eV) of a-RuMo/NiMoO4/NF, the Gibbs free energy of hydrogen adsorption (ΔGH*, from -1.29 to -0.06 eV), and the energy barrier of HzOR (ΔGN2(g) = 1.50 eV to ΔGN2* = 0.47 eV). Profiting from these favorable factors, the a-RuMo/NiMoO4/NF exhibits excellent electrocatalytic performances, especially at large current densities, with an overpotential of 13 and 129 mV to reach 10 and 1000 mA cm-2 for HER. While for HzOR, it needs only -91 and 276 mV to deliver 10 and 500 mA cm-2, respectively. Further, the constructed a-RuMo/NiMoO4/NF||a-RuMo/NiMoO4/NF electrolyzer demands only 7 and 420 mV to afford 10 and 500 mA cm-2.

Synthesis of a Gold-Silver Alloy Nanocluster within a Ring-Shaped Polyoxometalate and Its Photocatalytic Property.

Alloying is an effective method for modulating metal nanoclusters to enrich their structural diversity and physicochemical properties. Recent investigations have demonstrated that polyoxometalates (POMs) can act as effective multidentate ligands for silver (Ag) nanoclusters to endow them with synergistic properties, reactivity, catalytic properties, and stability. However, the application of POMs as ligands has been confined predominantly to monometallic nanoclusters. Herein, we report a synthetic method for fabricating surface-exposed gold (Au)-Ag alloy nanoclusters within a ring-shaped POM ([P8W48O184]40-). Reacting an Ag nanocluster stabilized by the ring-shaped POM with Au ions (Au+) was found to substitute several Ag atoms at the core of the nanocluster with Au atoms. The resultant {Au8Ag26} alloy nanocluster demonstrated superior photocatalytic activity and stability compared to the pristine Ag nanocluster in the aerobic oxidation of α-terpinene under visible-light irradiation. These findings provide fundamental insights into the formation and catalytic properties of POM-stabilized alloy nanoclusters and advance exploration into the synthesis and applications of diverse metal nanoclusters.

Cerium-optimized platinum-free high-entropy alloy nanoclusters for enhanced ampere-level sustainable hydrogen generation

The incorporation of rare earth (RE) elements into high-entropy alloys (HEAs) as electrocatalysts for hydrogen evolution reaction (HER) shows great potential in addressing the energy crisis. Here, we successfully synthesized cerium (Ce)-tailored PdCeMoCuRu HEA with chemical homogeneity and stability using a facile wet-chemical synthesis strategy. The obtained PdCeMoCuRu HEA provides abundant active metal sites, resulting in superior HER performance compared to state-of-the-art Pt/C. It only requires 12.8 mV to achieve a current density of 10 mA cm−2, which is nearly half that required for Pt/C (24.8 mV). Importantly, it exhibits excellent electrocatalytic durability for 100 hours even under a high current density of 1.0 A cm−2 at the ampere level. Density functional theory (DFT) calculations confirm that the introduction of Ce can modify the electronic configuration and generate synergistic effects around Pd, Cu, and Ru active sites. This work establishes a novel approach for designing efficient RE-tailored HEA electrocatalysts.

Composition-dependent catalytic performance of AuxAg25-x alloy nanoclusters for oxygen reduction reaction

Composition-dependent catalytic performance of AuxAg25-x alloy nanoclusters for oxygen reduction reaction

Conversion mechanism of the atomically precise group IB metal nanoclusters by theoretical calculations

The controllable synthesis and design of group IB metal (i.e., Au/Ag/Cu) and their alloy nanoclusters (IB-NCs) rely on an elucidation of the conversion mechanism, bonding preference, and structure–property relationships. In the past decades, the development of cluster-to-cluster transformation and spectroscopic tracking strategy have provided important mechanistic insights that greatly help researchers improve synthetic skills and explore the application of IB-NCs. Specifically, with the aid of DFT calculations, the structural information of cluster-to-cluster conversion, including the intermediates and active sites, can be deduced from the atomic level. In this review, the conversion mechanisms of IB-NCs in the past three years have been reviewed to summarize the key factors influencing structural transformation and reactivity. The three types of cluster-to-cluster conversion (i.e., foreign metal source, foreign ligand, and other reagents/condition-induced conversion) were highlighted for further synthesis and design of functional nanoclusters.

Construction of Fe–In Alloy to Enable High Activity and Durability of Fe–N–C Catalysts

AbstractThe strategic regulation of the electronic properties and coordination environment of single‐atom sites through the integration of metal nanoclusters emerges as a promising route to enhance the oxygen reduction reaction (ORR) performance of Fe–N–C materials. Here, a catalyst (FeIn–NC) is successfully developed in which Fe–N–C materials encapsulate Fe–In alloy nanoclusters, and it shows excellent ORR activity and durability under alkaline conditions, with a high half‐wave potential of 0.924 V (vs RHE) and a zinc–air battery power density of 202.1 mW cm−2, superior to commercial Pt/C catalysts. Theoretical calculations unravel that the synergistic interaction between the Fe–In alloy and the FeN4 single‐atom site modifies the electronic structure and charge distribution at the FeN4 site, thereby enhancing the electrocatalytic activity and durability of the ORR. Potential‐dependent microkinetic modeling (MKM) further discloses the ORR mechanisms on the identified FeN4 sites. This work provides a viable strategy for the ORR improvement of Fe–N–C materials via p‐block metal‐based alloy nanoclusters.

Conductive Zeolite Supported Indium-Tin Alloy Nanoclusters for Selective and Scalable Formic Acid Electrosynthesis.

Upgrading excess CO2 toward the electrosynthesis of formic acid is of significant research and commercial interest. However, simultaneously achieving high selectivity and industrially relevant current densities of CO2-to-formate conversion remains a grand challenge for practical implementations. Here, an electrically conductive zeolite support is strategically designed by implanting Sn ions into the skeleton structure of a zeolite Y, which impregnates ultrasmall In0.2Sn0.8 alloy nanoclusters into the supercages of the tailored 12-ring framework. The prominent electronic and geometric interactions between In0.2Sn0.8 nanoalloy and zeolite support lead to the delocalization of electron density that enhances orbital hybridizations between In active site and *OCHO intermediate. Thus, the energy barrier for the rate-limiting *OCHO formation step is reduced, facilitating the electrocatalytic hydrogenation of CO2 to formic acid. Accordingly, the developed zeolite electrocatalyst achieves an industrial-level partial current density of 322mA cm-2 and remarkable Faradaic efficiency of 98.2% for formate production and stably maintains Faradaic efficiency above 93% at an industrially relevant current density for over 102 h. This work opens up new opportunities of conductive zeolite-based electrocatalysts for industrial-level formic acid electrosynthesis from CO2 electrolysis and toward practically accessible electrocatalysis and energy conversion.

Geometric and electronic properties of anionic precious metal gold doped boron clusters AuB n − (n = 10–20)

Recently, the Au–B covalent bonds in gold doped boron clusters has attracted great attention. However, there are fewer theoretical reports on exploration their ground state structures and stabilities, especially for the medium sizes. Here, we study the structural evolution and electronic properties of the anionic Au doped boron clusters with medium sizes of n from 10 to 20 using the unbiased cluster structural searches combined with density functional theory (DFT) calculations. The results reveal that the quasi-planar AuB18 − (1A, C 1) cluster shows excellent stability and a large vertical separation energy (VDE) of 4.25 eV. The good consistency between the computationally simulated photoelectron spectra and the experimental spectra strongly supports the correctness of our low-lying structures. Further bonding analyses show that the well-stabilized aromatic AuB18 − cluster is due to the active σ interactions between Au atom (6s orbitals) and B units (2p orbitals), as well as the large number of σ–bonds in the B18 − moiety with π-aromaticity. These findings enriched the family of Au-B alloy clusters and metal-doped boron-based aromatic clusters, which provide valuable information for the experimental characterization and preparation of boron-rich alloy nanoclusters in the future.

Adsorption and dissociation of NO on gold–palladium alloy clusters: A density functional theory study

Alloy nanoclusters often exhibit distinctive and exceptional performance, making them especially appealing as catalysts. In this study, the adsorption and dissociation of NO on AumPdn (m + n = 8) clusters was studied using density functional theory (DFT). The most stable structures of AumPdn (m + n = 8) clusters were reported by the CALYPSO search screening program and DFT geometric optimization. The binding energy and bond critical point (BCP) analysis show that alloying could lead to a more compact structure and relatively stronger stability. Molecular electrostatic potential (MESP) analysis revealed that the optimal site for the adsorption of the NO molecule on AumPdn (m + n = 8) clusters was at the top site, with Pd atoms being the preferred choice. Projected density of states (PDOS) calculations demonstrate that the d-band center of the Au5Pd3 cluster was closest to the Fermi level, enhancing the interaction between the cluster surface and adsorbed molecules. The activation energy of NO dissociation on the Au5Pd3 surface is the lowest at 0.48 eV. These findings indicate that the Au5Pd3 nano-alloy cluster shows promise as an effective catalyst in the direct transformation of NO into non-toxic substances.

Discovering of Atomically Precise Metal Nanoclusters by High-Throughput Syntheses Platform.

Understanding the complete structure of noble metal nanoclusters is both academically and practically significant. However, progress has been hindered by the low synthetic efficiency of many nanocluster syntheses. In this study, we present the first high-throughput syntheses of homo-gold, homo-copper, and gold-copper alloy nanoclusters in dichloromethane at room temperature. Through high-throughput screening, we successfully obtained three nanoclusters in a single reaction: Au18(SC6H11)14, [Au41Cu66(SC6H11)44](SbF6)3, and an unidentified copper cluster (referred to as Au18, Au41Cu66 , and Cu-NC). The optimized synthesis route was achieved with the assistance of machine learning for experimental data analysis, which also guided the synthesis of other metal nanoclusters such as Au40Cu34(4-S-PhF)40 (Au40Cu34), [Au6Cu6(SPh)12]n ([Au6Cu6]n), and Au18Cu32(3,5-C8H9S)36 (Au18Cu32)). This research demonstrates that high-throughput screening can be a valuable tool in accelerating the development of nanocluster syntheses.

Boosted solar water oxidation steered by atomically precise alloy nanocluster

Boosted solar water oxidation steered by atomically precise alloy nanocluster

Anomalous Structural Transformation of Cu(I) Clusters into Multifunctional CuAg Nanoclusters.

We report an anomalous structural transformation of a Cu(I) cluster into two different types of copper-silver (CuAg) alloy nanoclusters. Different from previous reports, we demonstrate that under specifically designed reaction conditions, the Ag-doping could induce a substantial growth of the starting Cu15 and a Ag13Cu20 nanocluster was obtained via the unexpected insertion of an Ag13 kernel inside the Cu(I)-S shell. Ag13Cu20 demonstrates high activity to initiate the photopolymerization of previously hard-to-print inorganic polymers in 3D laser microprinting. Interestingly, a slight modification of the reaction condition leads to the formation of another Ag18-xCuxS (8≤x) nanocluster templated by a central S2- anion, which possesses a unique electronic structure compared to conventional template-free CuAg nanoclusters. Overall, this work unveils the intriguing doping chemistry of Cu clusters, as well as their capability to create different types of alloy nanoclusters with previously unobtainable structures and multifunctionality.

A Highly Sensitive and Selective Fluorescent Sensor for Folic Acid Detection Based on D-penicillamine Stabilized Ag/Cu Alloy Nanoclusters.

In this work, a highly sensitive and selective method for detecting folic acid (FA) was developed using D-penicillamine (DPA) stabilized Ag/Cu alloy nanoclusters (DPA@Ag/Cu NCs). The yellow emission of DPA@Ag/Cu NCs was found to be quenched upon the addition of FA to the system. The fluorescence intensity quenching value demonstrated a linear relationship with FA concentrations ranging from 0.01 to 1200 μM, with a limit of detection (LOD) of 5.3 nM. Furthermore, the detection mechanism was investigated through various characterization analyses, including high resolution transmission electron microscopy, fluorescence spectra, ultraviolet-visible absorption spectra, and fluorescence lifetime. The results indicated that the fluorescence quenching induced by FA was a result of electron transfer from FA to the ligands of DPA@Ag/Cu NCs. The selectivity of the FA sensor was also evaluated, showing that common amino acids and inorganic ions had minimal impact on the detection of FA. Moreover, the standard addition method was successfully applied to detect FA in human serum, chewable tablets and FA tablets with promising results. The use of DPA@Ag/Cu NCs demonstrates significant potential for detecting FA in complex biological samples.