Alkyl Chain Research Articles

Amplification of Protein Expression by Self-Amplifying mRNA Delivered in Lipid Nanoparticles Containing a β-Aminoester Ionizable Lipid Correlates with Reduced Innate Immune Activation.

Self-amplifying mRNA (saRNA) is witnessing increased interest as a platform technology for protein replacement therapy, gene editing, immunotherapy, and vaccination. saRNA can replicate itself inside cells, leading to a higher and more sustained production of the desired protein at a lower dose. Controlling innate immune activation, however, is crucial to suppress unwanted inflammation upon delivery and self-replication of RNA in vivo. In this study, we report on a class of β-aminoester lipids (βAELs) synthesized through the Michael addition of an acrylate to diethanolamine, followed by esterification with fatty acids. These lipids possessed one or two ionizable amines, depending on the use of nonionic or amine-containing acrylates. We utilized βAELs for encapsulating saRNA in lipid nanoparticles (LNPs) and evaluated their transfection efficiency in vitro and in vivo in mice, while comparing them to LNPs containing ALC-0315 as an ionizable lipid reference. Among the tested lipids, OC7, which comprises two unsaturated oleoyl alkyl chains and an ionizable azepanyl motif, emerged as a βAEL with low cytotoxicity and immunogenicity relative to ALC-0315. Interestingly, saRNA delivered via the OC7 LNP exhibited a distinct in vivo transfection profile. Initially, intramuscular injection of OC7 LNP resulted in low protein expression shortly after administration, followed by a gradual increase over a period of up to 7 days. This pattern is indicative of successful self-amplification of saRNA. In contrast, saRNA delivered via ALC-0315 LNP demonstrated high protein translation initially, which gradually declined over time and lacked the amplification seen with OC7 LNP. We observed that, in contrast to saRNA OC7 LNP, saRNA ALC-0315 LNP induced potent innate immune activation by triggering cytoplasmic RIG-I-like receptors (RLRs), likely due to the highly efficient endosomal membrane rupturing properties of ALC-0315 LNP. Consequently, the massive production of type I interferons quickly hindered the amplification of the saRNA. Our findings highlight the critical role of the choice of ionizable lipid for saRNA formulation in LNPs, particularly in shaping the qualitative profile of protein expression. For applications where minimizing inflammation is desired, the use of ionizable lipids, such as the βAEL reported in this study, that elicit a low type I interferon response in saRNA LNP is crucial.

Experimental and theoretical studies of physicochemical properties of Gemini imidazolium ionic liquids: hydroxyl group in spacer chain and alkyl chain length of cation

Experimental and theoretical studies of physicochemical properties of Gemini imidazolium ionic liquids: hydroxyl group in spacer chain and alkyl chain length of cation

Synthesis and Magnetic Properties of Spherical Maghemite Nanoparticles with Tunable Size and Surface Chemistry.

We report the synthesis of uniform populations of spherical maghemite nanoparticles by thermal decomposition of iron precursors with tunable diameters centered at 3.3, 7.5, and 12.0 nm and tunable surface chemistry. The three stabilizing ligands were fatty acids with three different alkyl chain lengths (18, 12, and 8 carbon atoms). The unprecedented accurate control of the surface chemistry is made possible by the use of three types of iron complexes, that is, iron oleate (C18), iron dodecanoate (C12), and iron octanoate (C8), associated with fatty acid ligands having the same alkyl chain length, that is, oleic acid (C18), dodecanoic acid (C12), and octanoic acid (C8). Since the thermal decomposition of the iron precursor varies with the chain length, no general rules can be applied to control the nanoparticle size, but optimal synthesis conditions have been investigated to induce the growth of nanoparticles with three different surface chemistries, keeping the diameters centered at 3.3, 7.5, and 12.0 nm. Finally, structural characterization of the nine populations of maghemite nanoparticles was performed by transmission electron microscopy and X-ray diffraction, and magnetic properties were determined by using SQUID magnetometry.

Solvation Sheath Reorganization by Alkyl Chain Tuning Promises Lean-Electrolyte Li–S Batteries

Solvation Sheath Reorganization by Alkyl Chain Tuning Promises Lean-Electrolyte Li–S Batteries

Towards device stability of perovskite solar cells through low-cost alkyl-terminated SFX-based hole transporting materials and carbon electrodes

Developing cost-effective, high-efficiency, and stable hole transporting materials (HTMs) is crucial for replacing traditional spiro-OMeTAD in perovskite solar cells (PSCs) and achieving sustainable solar energy solutions. This work presents two novel air-stable HTMs based on a spiro[fluorene-9,9′-xanthene] (SFX) core functionalized with N-methylcarbazole (XC2-M) and N-hexylcarbazole (XC2-H) rings. These HTMs were synthesized via a straightforward, three-step process with good overall yields (∼40%) and low production costs. To further reduce device cost, carbon back electrodes were employed. The resulting PSCs, with a structure of FTO/SnO2/Cs0.05FA0.73MA0.22Pb(I0.77Br0.23)3/HTM/C achieved power conversion efficiencies (PCEs) of 13.5% (XC2-M) and 10.2% (XC2-H), comparable to the reference spiro-OMeTAD device (12.2%). The choice of alkyl chain on the HTM significantly impacts film morphology and device stability. The XC2-H device exhibited exceptional long-term stability, retaining approximately 90% of its initial PCE after 720 h of storage in 30–40% humidity air without encapsulation. This surpasses the performance of both the spiro-OMeTAD (55% retention) and XC2-M (68% retention) devices. The superior stability of XC2-H is attributed to its highly hydrophobic nature and the formation of a compact, smooth film due to interdigitation of the hexyl chains. The straightforward synthesis of XC2-H from commercially available materials offers a promising approach for large-scale PSC production.

Catalytic Enantioselective Friedel–Crafts Allenylation

AbstractThe first enantioselective Friedel‐Crafts (FC) allenylation reaction for the creation of central chirality is developed under cooperative Ir(I)/(phosphoramidite,olefin) and Lewis acid catalysis. This enantioconvergent reaction utilizes racemic allenylic alcohol as the electrophile and shows compatibility with a variety of electron‐rich arenes and heteroarenes. The resulting highly enantioenriched (up to >99.5 : 0.5 e.r.) 1,1‐disubstituted allenylic methanes, bearing a benzylic carbon stereocenter, are obtained with complete regiocontrol – both on (hetero)arenes as well as on the allenylic fragment. This protocol allows for the enantioselective formal introduction of a 4‐carbon alkyl chain into (hetero)arenes, along with the creation of a benzylic stereocenter. Judicious synthetic elaborations not only lead to formal enantioselective FC alkylation products of less electron‐rich arenes but also of substituted arenes in ortho‐ and even meta‐selective fashion. An intramolecular version of this FC allenylation is shown to proceed with promising enantioselectivity under the same catalytic conditions. Mechanistic studies revealed the involvement of dynamic kinetic asymmetric transformation (DyKAT) of racemic allenylic alcohols in this reaction.

Precisely Regulating Photoactivated Dynamic Room Temperature Phosphorescence by Alkyl Chain‐Induced Lattice‐Softening

AbstractDynamic response room temperature phosphorescence (RTP) is a hot topic in smart materials research due to its unique RTP‐response characteristics under external stimuli. However, its precisely control are currently challenging. Here, an alkyl chain‐induced lattice‐softening strategy is proposed to precisely regulate photoactivated dynamic RTP (PDRTP). By adjusting the alkyl chain flexibility of hybrid metal halide matrices, oxygen permeability can be adjusted, thereby achieving finely manipulate of the photoactivation equilibrium time, RTP lifetime, and RTP wavelength of the resulted host–guest doped materials within the ranges of 10–600 s, 0.05‐1.62 s, and 405–595 nm, respectively. It is also demonstrated the potential application of the PDRTP materials in afterglow oxygen sensing and multi‐level information encryption. This study not only proposes an effective method for regulating the photosensitivity of PDRTP materials, but also points out a new direction for exploring gas permeability in dense‐packed crystalline materials.

Facile fabrication of luminescent ultra‐high molecular weight polyethylene fibers based on novel alkyl‐substituted 1,8‐naphthalimide fluorescent dyes

AbstractUltra‐high molecular weight polyethylene (UHMWPE) fiber, with excellent light resistance, and chemical resistance, is one of the most important high‐performance fibers. However, the high hydrophobicity and crystallinity make it difficult to color, restricting the development of colored fluorescent UHMWPE protection materials. In this study, three hydrophobic fluorescent dyes (NC4, NC8, NC16) for fluorescent dyeing of UHMWPE were developed by introducing alkyl substituents of different lengths (butyl, octyl, and hexadecyl) and polar cyano groups onto 4‐NH‐1,8‐naphthalimide fluorescent chromophore. The relationship between the structures and the application performance was studied, and theoretical calculations were combined to explore the influence of the substituents on the spatial and electronic effects of fluorescent dyes. With the extension of the alkyl chain, the dye‐uptake rate and building‐up property was enhanced, and the equilibrium dye‐uptake rates for NC4, NC8, and NC16 were 18.21%, 93.22%, and 62.96%, respectively. NC8, which was proven to have high hydrophobicity and maximum dipole moment, exhibited the highest dye‐uptake rate. The dyed UHMWPE fabrics exhibited strong yellow‐green fluorescence. This study provides a facile strategy for constructing luminescent UHMWPE protection materials.

Catalytic Enantioselective Friedel-Crafts Allenylation.

The first enantioselective Friedel-Crafts (FC) allenylation reaction for the creation of central chirality is developed under cooperative Ir(I)/(phosphoramidite,olefin) and Lewis acid catalysis. This enantioconvergent reaction utilizes racemic allenylic alcohol as the electrophile and shows compatibility with a variety of electron-rich arenes and heteroarenes. The resulting highly enantioenriched (up to >99.5 : 0.5 e.r.) 1,1-disubstituted allenylic methanes, bearing a benzylic carbon stereocenter, are obtained with complete regiocontrol - both on (hetero)arenes as well as on the allenylic fragment. This protocol allows for the enantioselective formal introduction of a 4-carbon alkyl chain into (hetero)arenes, along with the creation of a benzylic stereocenter. Judicious synthetic elaborations not only lead to formal enantioselective FC alkylation products of less electron-rich arenes but also of substituted arenes in ortho- and even meta-selective fashion. An intramolecular version of this FC allenylation is shown to proceed with promising enantioselectivity under the same catalytic conditions. Mechanistic studies revealed the involvement of dynamic kinetic asymmetric transformation (DyKAT) of racemic allenylic alcohols in this reaction.

Post-Treating Grain Boundaries and Surface Defects by Long-Chain Polymer for Highly Efficient and Stable Perovskite Solar Cells.

Grain boundaries (GBs) and surface defects within perovskite films are inherent challenges that affect the photovoltaic performance of perovskite solar cells (PSCs. In this work, Nylon 11 (N11) is utilized, a long-chain polymer, for post-treating the GBs and surface defects within FAPbI3 films. The multifunctional groups of N11 exhibit unique passivation abilities, enabling self-regulation and selective correction of reverse-charged defects. Post-treating with N11 results in high-quality FAPbI3 films characterized by tight GBs and low surface defect density. Despite fabrication under full open-air conditions, the N11 post-treatment significantly enhances the power conversion efficiency (PCE) value of FAPbI3 PSCs, increasing it from the reference value of 21.89% to 23.54%. Importantly, the long alkyl chain present in N11 significantly enhances the humidity stability of the PSCs. Unencapsulated PSCs treated with N11 maintain 89% of their initial PCE after exposure to air with 30% relative humidity (RH) for 1000h, demonstrating resilience to elevated humidity levels. This work highlights the substantial improvement in the photovoltaic performance of PSCs achieved through the post-treatment with N11.

Wetting and interfacial behavior of imidazolium-based ionic liquids and water: A comprehensive review

Ionic liquids (ILs) have garnered considerable attention for their diverse applications, notably in controlling wettability on specific solid substrates, which holds ramifications for various processes reliant on interfacial behaviour encompassing adhesion and wetting. This review encompasses key advancements in IL wetting behavior and its implications. Factors such as drop size, temperature, alkyl chain structure, anion type, water concentration, and external electric fields influence the contact angle of ILs and their aqueous solutions. Despite challenges arising from IL property susceptibility to water content and wettability measurement sensitivity to solid surface, this review navigates the extent of IL wetting research, addressing line tension, surface tension measurement, and hydrogen bonding. The study aspires to furnish profound insights into IL wetting dynamics, informing IL-based fluidic technology design and elucidating intricate static and dynamic wetting attributes in analogous complex fluids.

Refinement of non-covalent interactions via hetero-seeded self-assembly for the pathway complexity control of perylene derivatives

The introduction of methodologies to amalgamate, shear, or fabricate structures could potentially lead to exceptionally remarkable architectures. In this work, three similar perylene-based molecules, PDI 1–3, each modified with different alkyl chains, were synthesized to investigate the pathway complexity via hetero-seeded self-assembly. Delightfully, a type of remarkably active metastable nanowires assemblied from perylene-based molecule PDI 1 was obtained. Based on this, hierarchical heterojunction microsheets were fabricated using metastable nanowires derived from PDI 1, initiated by hetero-seeds sourced from the perylene-based molecule PDI 2 in a "bottom-up" approach. Furthermore, the decomposition of the microsheet seed derived from PDI 3 was achieved, resulting in the formation of heterogeneous nanowires induced by the metastable nanowires from PDI 1 in a "top-down" approach. The decomposition and fabrication of the microsheet architectures were unveiled to be governed by the competitive π-interactions between seeds and monomers during the self-assembly process. This research is a powerful novel approach for assembling complex architectures and has enhanced the understanding of the molecular assembly growth process at the interface.

Experimental Evidence for Zerovalent Pd(NHC) as a Competent Catalyst in C-N Cross-Coupling (NHC = DiMeIHeptCl).

Use of the branched N-heterocyclic carbene (NHC) ligand 1,3-bis(2,6-bis(3-methyl-1-(2-methylpropyl)butyl)phenyl)-4,5-dichloro-1,3-dihydro-2H-imidazole-2-ylidene (DiMeIHeptCl) facilitated the stabilization of several relevant intermediates for Pd(NHC)-catalyzed C-N cross-coupling reactions. Complexes [Pd(DiMeIHeptCl)]2(μ-N2), [Pd(DiMeIHeptCl)]2(μ-η2-1,2-η2-4,5-C6H6), and Pd(DiMeIHeptCl)(pyridine), representing zerovalent Pd(NHC) bearing labile ligands, were isolated and structurally characterized, along with divalent PdCl(Ph)(DiMeIHeptCl) and PdCl(Ph)(DiMeIHeptCl)(n-propylamine). The former is a 14-electron Pd complex, which is stable under air and chromatography on silica gel or neutral alumina. One possible reason for this exceptional stability is the numerous dispersion interactions between the NHC alkyl chains and the Pd-Ph group. Detailed investigations of catalyst activation and oxidative addition confirmed that "Pd(NHC)" is formed from many known Pd(II)(NHC) precatalysts and provided activation rates for these different precatalysts.

Rapid Access to Isoprenoid Quinones through X@RONa-Catalyzed Redox Chain Reaction.

Dodecameric sodium alkoxide clusters encaging a halide anion (X@RONa) were shown to be C-C bond formation catalysts in the redox chain reaction of quinones. With up to 30 mol % tert-decanol as the catalyst and stoichiometric base NaH, a great number of chemically sensitive isoprenoid quinones, including health-relevant Coenzyme Q and Vitamin K family compounds, were easily made in one step from their parent quinones and polyprenyl halide. The X@RONa clusters and possible cluster-derived intermediates were studied by characterization techniques, control experiments, and theory. The X@RONa clusters likely facilitated the C-alkylation step by preventing O-alkylation, promoting dissociation of halide from the alkyl chain, and transporting hydride into the nonpolar solvent.

Constructing Broadband THz Optical Crystals by Extending the Length of the Alkyl Chain

Constructing Broadband THz Optical Crystals by Extending the Length of the Alkyl Chain

Mono-palmitoyl-N-alkylurea ligands as specific activators of human Toll-like receptor 2/6 heterodimer.

Ligands for Toll-like-receptor 2 (TLR2) have demonstrated significant potential as immune-stimulating components in synthetic vaccines. Activation of TLR2 relies on the formation of dimeric complexes with either TLR1 or TLR6 and the nature of these dimers can impact therapeutic outcomes. The lipopeptide-based TLR2 ligands Pam3CysSK4 and Pam2CysSK4 have been extensively studied, and their recognition by different TLR-receptor heterodimers, TLR2/TLR1 and TLR2/TLR6, respectively, has been established. However, the high lipophilicity of these ligands, containing multiple palmitoyl residues, can result in solubility issues when used as vaccine adjuvants. To address this, we previously synthesized a less lipophilic ligand containing a single palmitoyl chain called mini-UPam, which effectively stimulates human moDC maturation. We here probe the receptor-dimer specificity of several mini-Upam derivatives and reveal that these mini-UPam are hTLR2/TLR6 selective ligands and that the introduction of longer urea alkyl chains does not shift the binding specificity to hTLR2/TLR1 heterodimers, in contrast to their Pam2CysSK4 and Pam3CysSK4 counterparts, pointing to a different binding mode of the UPam ligands.

Tuning Electrostatics to Promote Ordered Monolayers of Phosphole-Lipids.

Heteroatom-doped π-conjugated systems have been exploited for electronic device applications. Phosphole-containing backbones are particularly intriguing with regard to electron delocalization and ultimately control over the photophysical, redox, and charge transfer characteristics. However, practical application of these materials commonly relies on well-structured, thin film architectures. Self-assembly offers a route to generate ordered 2D structures deposited on solid substrates. The orientation of these deposited films can be manipulated by the introduction of alkyl chains of varying length (to form phosphole-based lipids) and chemical modification of the phosphole-derived headgroup. External controls can also be considered to tune these films' properties, e.g., the electrostatic interactions within the film can be controlled by varying the environment with the addition of simple salt counterions. A series of lipids with phosphole-based π-conjugated headgroups have been designed and exhibit intramolecular conformational changes in response to external conditions. Herein the 2D film structure in Langmuir and Langmuir-Blodgett films is reported in the presence and absence of halide salts. The film morphology obtained from Brewster angle and atomic force microscopy shows the formation of a condensed phase but also 3D aggregates, and grazing incidence X-ray diffraction confirmed the presence of untilted, hexagonally packed chains. The size of the counterion influences its ability to intercalate between the phosphole headgroups, which ultimately provides a means to induce the formation of a well-ordered, single monolayer film without aggregates that can be transferred to the solid substrate.

Sulfonamide-Sulfonimide Copolymers as Novel, Fluorine-Lean Type of Proton Exchange Membranes for Fuel Cell Application.

In this work, a novel type of fluorine-lean proton exchange membranes is presented, using sulfonamide-sulfonimide functional groups for ion conduction. These groups are constructed on a polystyrene backbone for simple and cost-efficient usage as well as rapid scalability. The polymer is further tailored by adjusting the sulfonamide functionality with various end-groups, namely pentafluorophenyl, 4-fluorophenyl, butyl and octyl groups. These groups affect the pKa, leading to pKa values of 5.7 for the pentafluorophenyl substitution and pKa 10.5 for the alkyl chain. The glass transition temperature of the sulfonamide homopolymers can be reduced from Tg=151 °C (Pentafluorophenyl) to 49 °C (Octyl), making the ionomer more flexible at room temperature. The combination of the non-swelling sulfonamide further mitigates the high water uptake of the sulfonimide while maintaining the nominal ion exchange capacity. This combination leads to extremely high proton conductivities with up to σ=283 mS cm-1 at room temperature, which is clearly outperforming Nafion and approaches values for acid doped systems. This approach can pave the way to a novel type of ion conducting class in proton exchange membrane fuel cells.

A systematic review of the toxic potential of parabens in fish.

Parabens are the most prevalent ingredients in cosmetics and personal care products (PCPs). They are colorless and tasteless and exhibit good stability when combined with other components. Because of these unique physicochemical properties, they are extensively used as antimicrobial and antifungal agents. Their release into the aquatic ecosystem poses potential threats to aquatic organisms, including fish. We conducted an electronic search in PubMed (http://www.ncbi.nlm.nih.gov/pubmed) using the search term parabens and fish and sorted 93 articles consisting of methyl paraben (MTP), ethyl paraben (ETP), propyl paraben (PPP), butyl paraben (BTP), and benzyl paraben (BNP) in several fish species. Furthermore, we confined our search to six fish species (common carp, Cyprinus carpio; fathead minnows, Pimephales promelas; Japanese medaka, Oryzias latipes; rainbow trout, Oncorhynchus mykiss; Nile tilapia, Oreochromis niloticus; and zebrafish, Danio rerio) and four common parabens (MTP, ETP, PPP, and BTP) and sorted 48 articles for review. Our search indicates that among all six fish, zebrafish was the most studied fish and the MTP was the most tested paraben in fish. Moreover, depending on the alkyl chain length and linearity, long-chained parabens were more toxic than the parabens with short chains. Parabens can be considered endocrine disruptors (EDs), targeting estrogen-androgen-thyroid-steroidogenesis (EATS) pathways, blocking the development and growth of gametes, and causing intergenerational toxicity to impact the viability of offspring/larvae. Paraben exposure can also induce behavioral changes and nervous system disorders in fish. Although the USEPA and EU limit the use of parabens in cosmetics and pharmaceuticals, their prolonged persistence in the environment may pose an additional health risk to humans.

Trialkoxysilane Grafting in Alcohols: A Simple Approach towards Modified Silica-Based Materials.

The grafting of trialkoxysilanes is the most common method for the surface functionalization of silica gel, and it is usually carried out in the presence of toluene or other solvents such as acetonitrile or acetone. Here, we replaced these solvents with alcohols to afford silica materials containing alkoxy groups linked to the silicon atom. The grafting of N,N-dimethyl-3-amino- or 3-amino-propyltrimethoxysilane was carried out in the presence of several alcohols containing an unsubstituted alkyl chain (C7 and C14), a PEG functionalized chain, or an amino-substituted chain (N,N-dimethylamino, pyridyl). Materials were characterized via solid-state 13C- and 29Si CPMAS NMR and thermogravimetric analysis to prove that alcohols are not "innocent" solvents but take part in the reaction and lead to [RSi(OR1)-(OSi)2] systems where the OR1 group proceeds from the alcohol used in the synthesis. As a proof of concept, we briefly studied the catalytic activity of some of these materials with the aim of showing how different modifications can influence the course of a selected reaction. Finally, a quaternary ammonium salt (QAS)-based silica was prepared containing both an alkyl-QAS and an alkoxy-QAS linked to silicon atoms. This could represent an interesting approach for the development of new antifouling-based materials and, overall, the described strategy could be useful for the preparation of new organosilica materials.