Alkaline pH Research Articles

Enhancing the functionalities of chickpea protein isolate through a combined strategy with pH-shifting and cold plasma treatment

This study investigated the impact of combining pH-shifting and cold plasma (CP) treatment on chickpea protein isolate (CPI) functionality. Compared with pH-shifting treatment alone, the functional properties of CPI were significantly improved when the pH was shifted under acidic (pH = 2) or alkaline (pH = 12) conditions, followed by a 30 s CP treatment before neutralization at pH 7. Particularly, the method conducted at pH 12 followed by 30 s CP treatment proved most efficient, significantly improving solubility (from 65.51 ± 1.07% to 73.01 ± 0.65%), gel strength (from 27.19 ± 1.51 g to 66.57 ± 1.69 g), fat absorption capacity (from 2.39 ± 0.02 g/g to 4.22 ± 0.05 g/g), emulsifying activity (from 57.47 ± 0.06 m2/g to 71.95 ± 0.19 m2/g), foaming capacity (from 58.33 ± 2.36% to 123 ± 5.1%), and in vitro protein digestibility (from 47.49 ± 0.44% to 55.78 ± 0.8%). These improvements were attributed to reduced protein aggregates, increased solubility, and enhanced surface hydrophobicity. Furthermore, alterations in the secondary and tertiary protein structure following these treatments positively impacted CPI's functional properties, offering important implications for protein modification with improved functional profiles.

Incipient Salinization: A Case Study of the Spring of Asclepieion in Lentas (Ancient Lebena), Crete

Sanctuaries devoted to Asclepius were established and operated for almost a thousand years in various Greek and Roman cities throughout the Mediterranean region. The Asclepieion sanctuary in Lentas (formerly known as Ancient Lebena) in Crete was famous for receiving water from a sacred spring. In Ancient Lebena, Levinaion was a famous centre for hydrotherapy, physiotherapy, and a psychiatric hospital. In the present paper, we aim to assess the hydrochemical status of this sacred spring that holds a prominent position in archaeological and historical studies. The main objectives of this study are: Initially, to present supervisory evidence (archaeological, geological, hydrochemical) of an area that was a water resource management model for many centuries, carrying out therapeutic work. The second objective is to present and compare hydrochemical data in the last century, i.e., from 1915 to 2021. The third objective is to highlight and warn of an incipient saltwater intrusion in the area along the Lentas coast. The fourth objective is to propose an alternative and sustainable form of water resources management in the region that requires the study and rational utilization of the sporadic small water springs in the region. Our study focuses on a basic hydrochemical analysis of spring and borehole water in the remains of Levinaion in the Lentas region, and their comparison with sparse historical data of the sacred spring water, aiming to interpret the impact of the changes in the spring water resources that occurred in recent decades due to urban modernization. Our results highlight (i) visible fluctuations in chemical composition of borehole water samples; (ii) a neutral to alkaline pH in borehole waters and an alkaline pH in spring waters; (iii) undetectable arsenic in Lentas borehole water, unlike historical data of Lentas spring water; (iv) low values of dissolved radon in Lentas borehole water and the spring water of Kefalovrysa; and (v) a timeless constant and hypothermic nature of the water of both the sacred spring and borehole of Lentas, and also of the Kefalovrysa spring. The recorded historical data, i.e., from 1915 to 1957, due to the absence of substantial anthropogenic activity in the area, can be used as reference values (natural background levels, NBLs) for the Lentas area. Our findings emerge with the need to bring again the flowing spring water of the sacred spring of Lentas in its original form through sustainable management and re-discover its beneficial therapeutical effects.

The comparison of photocatalytic reduction of CO2 on ZnO photocatalysts at slightly acidic and alkaline pH towards the formation of valuable products

The photocatalytic reduction of CO2 to carbon monoxide, methane and hydrogen (as a valuable byproduct) in the suspension or solution of various Zn-based forms in an alkaline environment and water, respectively, was investigated. These are the first results showing homogeneous CO2 photoreduction in the presence of Zn-based photocatalysts in an inorganic environment.The ZnO photocatalysts were suspended in the alkaline environment, while in water, they completely dissolved during at least 6 hours of carbonation, forming a transparent solution. The small crystallite size also determines a high zinc solubility in an aqueous solution (97.7 % for 14 nm, 92.2 % for 25 nm, and 68.5 % for crystallites larger than 100 nm). This homogeneous solution showed a slightly lower photoactivity than the heterogeneous suspension because of a lower concentration of crucial bicarbonate HCO3- ions. In both cases, the selectivity gives the order H2>CO>CH4. It was suggested that the photoactive centres in the dissolved agglomerates are the –Zn–O–Zn– hydrous bridges, which can use bicarbonate (HCO3-) ions as a transporter of CO2. In addition, the H+ ions generated during the ZnO dissolving in water can first participate in the CO2 photoreduction towards CO and CH4 and, afterwards, involve forming small quantities of hydrogen.

Organic sandwich-structured carbon fiber/SiO2/PES electrochemical membrane with significantly improved charge transfer efficiency and water permeability

Electrochemical membrane separation has the potential for good degradation efficiency and mitigates membrane fouling. However, it is still a real challenge to further build stable organic substrate and improve its charge efficiency. In this study, an electric conductive and sandwich-structured carbon fiber/SiO2/polyether sulfone (CF/SiO2/PES) membrane showing good tetracycline (TC) removal at both acidic (pH = 3) and alkaline (pH = 9) conditions was fabricated by a facile phase conversion method. The CF/SiO2/PES membrane exhibited notably improved water permeability, augmented by 42 % higher with external voltage than that of the membrane without voltage assistance. Furthermore, the CF/SiO2/PES membrane performance in TC removal was systematically assessed under diverse conditions, encompassing TC concentration, pH values, and applied voltage. The membrane displayed a good removal efficiency of 93.6 % and 91.8 % for TC at acidic and alkaline conditions, respectively. Additionally, the degradation pathway of TC was proposed. Crucially, the CF/SiO2/PES membrane exhibited exceptional reusability and stability over eight consecutive runs. Mechanism study proved that the reactive species play a key role in the TC degradation during electro-filtration. The exceptional permeability, removal efficiency, and recyclability position the CF/SiO2/PES membrane as a promising solution for antibiotic wastewater treatment.

"One-Pot" Method Preparation of Dendritic Mesoporous Silica-Loaded Matrine Nanopesticide for Noninvasive Administration Control of Monochamus alternatus: The Vector Insect of Bursapherenchus xylophophilus.

Monochamus alternatus is an important stem-boring pest in forestry. However, the complex living environment of Monochamus alternatus creates a natural barrier to chemical control, resulting in a very limited control effect by traditional insecticidal pesticides. In this study, a stable pesticide dendritic mesoporous silica-loaded matrine nanopesticide (MAT@DMSNs) was designed by encapsulating the plant-derived pesticide matrine (MAT) in dendritic mesoporous silica nanoparticles (DMSNs). The results showed that MAT@DMSNs, sustainable nanobiopesticides with high drug loading capacity (80%) were successfully constructed. The release efficiency of DMSNs at alkaline pH was slightly higher than that at acidic pH, and the cumulative release rate of MAT was about 60% within 25 days. In addition, the study on the toxicity mechanism of MAT@DMSNs showed MAT@DMSNs were more effective than MAT and MAT (0.3% aqueous solutions) in touch and stomach toxicity, which might be closely related to their good dispersibility and permeability. Furthermore, MAT@DMSNs are also involved in water transport in trees, which can further transport the plant-derived insecticides to the target site and improve its insecticidal effect. Meanwhile, in addition, the use of essential oil bark penetrants in combination with MAT@DMSNs effectively avoids the physical damage to pines caused by traditional trunk injections and the development of new pests and diseases induced by the traditional trunk injection method, which provides a new idea for the application of biopesticides in the control of stem-boring pests in forestry.

La-doped MgFe-layered double hydroxides and their sorption properties towards tungsten oxyanions (WO42-) at alkaline pH’s

The present study focuses on the tungsten recovery from alkaline solutions using for the first time La-doped MgFe-LDH type sorbents (pH ≥ 13). A small-scale synthesis procedure was optimized, and further upscaled (20x) to produce up to 200 g batches with reproducibility degree close to 100%. The chemical composition, structural and textural characteristics of the as-synthesized materials were investigated by ICP-OES, X-ray Diffraction, N2 physisorption and IR spectroscopy techniques. The materials were applied for sorption of WO42- anions in aqueous media under relevant conditions. Parameters influencing the sorption process, such as the LDH composition, pH of the sorption media, adsorption capacity, kinetics and desorption solution composition were thoroughly investigated. Multi-cycling tests in different desorption solutions combined with IR and XRD characterization of the La-MgFe-LDH solids in different steps of the process, allowed us to elucidate the WO42- recovery mechanism. Further, the La-doping in the LDH structure increases the sorption capacity and assures the material stability throughout the WO42- recovery process in high pH media. The alkaline stability was demonstrated by powder post characterization by X-ray Diffraction as well as performing alkaline stability test and follow up of any leaching elements by ICP-OES in alkaline solutions. The results indicate that the as-developed La-MgFe-LDH are suitable candidates for WO42- recovery from aqueous solutions, including highly alkaline solutions compatible with the current hydrometallurgical processes.

Ecotoxic effect in Allium cepa due to sphalerite weathering arising in calcareous conditions.

The ecotoxic effect of Zn species arising from the weathering of the marmatite-like sphalerite ((Fe, Zn)S) in Allium cepa systems was herein evaluated in calcareous soils and connected with its sulfide oxidation mechanism to determine the chemical speciation responsible of this outcome. Mineralogical analyses (X-ray diffraction patterns, Raman spectroscopy, scanning electron microscopy and atomic force microscopy), chemical study of leachates (total Fe, Zn, Cd, oxidation-reduction potential, pH, sulfates and total alkalinity) and electrochemical assessments (chronoamperometry, chronopotentiometry, cyclic voltammetry, and electrochemical impedance spectroscopy) were carried out using (Fe, Zn)S samples to elucidate interfacial mechanisms simulating calcareous soil conditions. Results indicate the formation of polysulfides (Sn2-), elemental sulfur (S0), siderite (FeCO3)-like, hematite (Fe2O3)-like with sorbed CO32- species, gunningite (ZnSO4·H2O)-like phase and smithsonite (ZnCO3)-like compounds in altered surface under calcareous conditions. However, the generation of gunningite (ZnSO4·H2O)-like phase was predominant bulk-solution system. Quantification of damage rates ranges from 75 to 90% of bulb cells under non-carbonated conditions after 15-30days, while 50-75% of damage level is determined under neutral-alkaline carbonated conditions. Damage ratios are 70.08 and 30.26 at the highest level, respectively. These findings revealed lower ecotoxic damage due to ZnCO3-like precipitation, indicating the effect of carbonates on Zn compounds during vegetable up-taking (exposure). Other environmental suggestions of the (Fe, Zn)S weathering and ecotoxic effects under calcareous soil conditions are discussed.

Preparation and Properties of Porous Concrete Based on Geopolymer of Red Mud and Yellow River Sediment.

Red mud (RM) and Yellow River sediment (YRS) are challenging to handle as waste materials. In this study, RM with geopolymer and heavy metal adsorption characteristics was combined with YRS and ground granulated blast furnace slag (GGBS) to develop a porous geopolymer with high strength and high adsorption performance. A geopolymer cementitious material with high strength was prepared using high temperature water bath curing of 90 °C and different dosages of YRS, and a porous geopolymer concrete was further prepared. The compressive strength, fluidity and setting time of geopolymer cementitious materials were tested, and the compressive strength, porosity and permeability of porous geopolymer concrete were also tested. The environmental impact assessment of geopolymer cementitious materials was further conducted. The hydration products and microstructure of geopolymer gel materials were analyzed by XRD, SEM and FT-IR tests. The results show that the addition of YRS can effectively prolong the setting time of the geopolymer cementitious material, and the enhancement rate is as high as 150% compared with the geopolymer cementitious materials without the addition of YRS. An appropriate amount of YRS can improve the compressive strength of the geopolymer cementitious materials, and its early compressive strength can be further improved under the high temperature water bath curing of 90 °C, and the compressive strength at an age of 3 d can be up to 86.7 MPa. Meanwhile, the compressive strength of porous geopolymer concrete at an age of 28 d is up to 28.1 MPa. YRS can participate in geopolymer reactions, and high temperature water bath curing can promote the reaction degree. Curing method and YRS dosages have little effect on the porosity and permeability of the porous geopolymer concrete. The porous geopolymer has a good heavy metal adsorption effect, and the alkaline pH values can be gradually diluted to neutral.

Development of an environmentally sustainable technique to minimize the sludge production in the textile effluent sector through an electrokinetic (EK) coupled with electrooxidation (EO) approach.

This study presents an environmentally sustainable method for minimizing sludge production in the textile effluent sector through the combined application of electrokinetic (EK) and electrooxidation (EO) processes. AAS and XRF analyses reveal that utilizing acidic electrolytes in the EK method successfully eliminates heavy metals (Cu,Mn, Zn, and Cr) from sludge, demonstrating superior efficiency compared to alkaline conditions. In addition, the total removal efficiency of COD contents was calculated following the order of EK-3 (60%), EK-1 (51%) and EK-2 (34%). Notably, EK-3, leveraging pH gradient fluctuations induced by anolyte in the catholyte reservoir, outperforms other EK systems in removing COD from sludge. The EK process is complemented by the EO process, leading to further degradation of dye and other organic components through the electrochemical generation of hypochlorite (940ppm). At an alkaline pH of 10.0, the color and COD removal were effectively achieved at 98 and 70% in EO treatment, compared to other mediums. In addition, GC-MS identified N-derivative residues at the end of the EO. This study demonstrates an integrated approach that effectively eliminates heavy metals and COD from textile sludge, combining EK with EO techniques.

Fe-ZSM-5 zeolite catalyst for heterogeneous Fenton oxidation of 1,4-dioxane: effect of Si/Al ratios and contributions of reactive oxygen species.

Heterogeneous Fenton oxidation using traditional catalysts with H2O2 for the degradation of 1,4-dioxane (1,4-DX) still presents challenge. In this study, we explored the potential of Fe-ZSM-5 zeolites (Fe-zeolite) with three Si/Al ratios (25, 100, 300) as heterogeneous Fenton catalysts for the removal of 1,4-DX from aqueous solution. Fe2O3 or ZSM-5 alone provided ineffective in degrading 1,4-DX when combined with H2O2. However, the efficient removal of 1,4-DX using H2O2 was observed when Fe2O3 was loaded on ZSM-5. Notably, the Brønsted acid sites of Fe-zeolite played a crucial role during the degradation of 1,4-DX. Fe-zeolites, in combination with H2O2, effectively removed 1,4-DX via a combination of adsorption and oxidation. Initially, Fe-zeolites demonstrated excellent affinity for 1,4-DX, achieving adsorption equilibrium rapidly in about 10min, followed by effective catalytic oxidative degradation. Among the Fe-ZSM-5 catalysts, Fe-ZSM-5 (25) exhibited the highest catalytic activity and degraded 1,4-DX the fastest. We identified hydroxyl radicals (·OH) and singlet oxygen (1O2) as the primary reactive oxygen species (ROS) responsible for 1,4-DX degradation, with superoxide anions (HO2·/O2·-) mainly converting into 1O2 and ·OH. The degradation primarily occurred at the Fe-zeolite interface, with the degradation rate constants proportional to the amount of Brønsted acid sites on the Fe-zeolite. Fe-zeolites were effective over a wide working pH range, with alkaline pH conditions favoring 1,4-DX degradation. Overall, our study provides valuable insights into the selection of suitable catalysts for effective removal of 1,4-DX using a heterogeneous Fenton technology.

Unveiling the contribution of Osborne protein fractions to the physicochemical and functional properties of alkaline and enzymatically extracted green lentil proteins

AbstractLentil proteins are gaining popularity as food ingredients, serving both functional and nutritional purposes. To better understand the properties of lentil proteins extracted using commercially relevant methods (alkaline and enzymatic), sequential fractionation by solubility (Osborne fractionation) was performed and the physicochemical, thermal, and functional properties of the extracts were characterized. Fractionation revealed that 43% of lentil proteins were water‐soluble (ALB, albumin‐rich), 37% salt‐soluble (GLO, globulin‐rich), 14% alkaline‐soluble (GLU, glutelin‐rich), and 3% ethanol‐soluble (PRO, prolamin‐rich). Protein extraction yields of 81% and 87% were achieved by alkaline (pH 9.0, 50 °C, 1:10 solids‐to‐liquid ratio, 60 min) and enzymatic extraction (same conditions with 0.5% (w/w) Alkaline Protease), respectively. Proteomic analysis allowed for the identification of 129 proteins among all extracts, and the ALB and GLO fractions exhibited similar protein profiles as the alkaline‐extracted proteins. The secondary structure of the protein fractions was dominated by β‐sheets (20%–35%) and unordered structures (45%–48%). Surface hydrophobicity and absolute zeta potential were negatively correlated (R2 = 0.82, p < 0.05). ALB and GLO fractions had higher denaturation temperatures than the alkaline/enzymatically‐extracted proteins, potentially due to partial denaturation. ALB and GLO fractions also had the highest solubility and emulsification capacities. Under acidic conditions, enzymatically‐extracted proteins exhibited better solubility (58 vs. 33%), emulsification (499 vs. 403 g oil/g dry sample), and similar foaming capacity (57%–69%) compared to alkaline‐extracted proteins. This study showed that alkaline and enzymatically extracted lentil proteins share physicochemical and functional characteristics with water‐ and salt‐extracted proteins, demonstrating the efficacy of these single‐stage extraction strategies in achieving high yields and desirable functionality.

The development of plastic waste and sewage sludge co-pyrolyzed biochar composites with improved interfacial characteristics for the effective removal of ciprofloxacin

The growing global proliferation of plastic waste and sewage sludge (SS) has emerged as a prominent environmental dilemma. This study assessed the efficacy of highly efficient carbon-based adsorbent materials derived from co-pyrolysis of SS and plastic waste in mitigating the concentration of ciprofloxacin (CPX) in an aqueous solution. Each formulated material included varying proportions—20% and 50%—of either polyethylene (PE) or polyethylene terephthalate (PET). Notably, composite with PET—50% exhibited a significant increase in specific surface area to 194.7 m2/g. Efficient adsorption of CPX up to 113.97 mg/g (qms) was reported at pH 5. Pollutant removal was recorded in 12 hours of retention time due to induced π–π interactions, electrostatic and hydrophobic surface interactions highlighting chemosorption. The alkaline pH impacted the adsorption capacity, causing a prominent decline. The SS-PET formulation exhibited a substantial increase in the number of active sites, thereby showing a strong interaction with ionized CPX molecules and yielding superior sorption efficiency by utilizing the novel combination of the material. The regenerative investigations also confirmed the high adsorption for four consistent cycles. Overall, acquiring comprehensive knowledge and practical information from this study will contribute to the effective management of CPX-contaminated wastewater and the mitigation of plastic pollution.

Bioactive potential of Bio-C Temp demonstrated by systemic mineralization markers and immunoexpression of bone proteins in the rat connective tissue

Intracanal medications are used in endodontic treatment due to their antibacterial activity and ability to induce the periapical repair. Among the intracanal medications, the Calen (CAL; SS. White, Brazil) is a calcium hydroxide-based medication that provides an alkaline pH and releases calcium, exerting an antimicrobial activity. Bio-C Temp (BIO; Angelus, Brazil), a ready-to-use bioceramic intracanal medication, was designed to stimulate the mineralized tissues formation. Here, we investigated the bioactive potential of BIO in comparison to the CAL in the rat subcutaneous. Polyethylene tubes filled with medications, and empty tubes (control group, CG) were implanted in the subcutaneous tissue of rats. After 7, 15, 30 and 60 days, the blood was collected for calcium (Ca+2) and alkaline phosphatase (ALP) measurement, and the capsules around the implants were processed for morphological analyses. The data were submitted to two-way ANOVA and Tukey test (p < 0.05). At 7, 15 and 30 days, the ALP level was grater in BIO and CAL than in CG (p < 0.0001). At 7 and 15 days, greater Ca+2 level was seen in the serum of CAL samples. From 7 to 60 days, an increase in the number of fibroblasts, osteocalcin- and osteopontin-immunolabelled cells was observed in BIO and CAL groups (p < 0.0001). In all periods, BIO and CAL specimens showed von Kossa-positive structures. Moreover, ultrastructural analysis revealed globules of mineralization in the capsules around the BIO and CAL specimens. Thus Bio-C Temp caused an increase in the ALP, osteocalcin and osteopontin, which may have allowed the formation of calcite, suggesting bioactive potential.Graphical

Electron Penetration Effect of Ni Single Atom Boosting CO2 to CO in PH‐Universal Electrolytes

AbstractElectrocatalytic CO2 reduction (ECR) powered by renewable electricity has attracted of wide attention because of its advantages to produce high‐value‐added chemicals and fuels. Additionally, ECR played a crucial role in addressing the challenge of excessive fossil fuel consumption caused by global warming. Herein, a unique armor structure with Ni nanoparticles coated by a carbon shell containing Ni─N─C (Ni─NP@Ni─SA) for industrial ECR to CO in pH‐universal electrolytes is designed. Ni─NP@Ni─SA catalyst exhibits ≈100% CO Faradaic efficiency, and CO partial current density can reach 500, 361, and 615 mA cm−2 in strong alkaline (pH 14), neutral (pH 7.2) and strong acidic (pH 1) electrolytes, respectively. Moreover, Ni─NP@Ni─SA can drive the rechargeable Zn‐CO2 battery with a high power density of 3.45 mW cm−2, and outstanding stability over 36 h. The structural characterizations and theoretical calculation together present that the electron penetration effect of Ni─NP@Ni─SA can strengthen the electronic enrichment state of Ni single atom, which facilitates the reaction kinetics of ECR by decreasing the formation energy barrier of key intermediate *COOH. This work pioneers a new design strategy to enhance the activity of single‐atom catalysts and seek high‐efficiency electrocatalysts for ECR in pH‐universal electrolytes.

Characterization of Lactic Acid Bacteria (LAB) Isolated from Homemade Fermented Kimchi in Bangladesh

The purpose of this present study was to explore lactic acid bacteria (LAB) from homemade kimchi. Traditionally, kimchi was made in this study at home using fresh vegetables such as cabbage, carrots, radish, green onion leaf, red pepper, garlic, ginger, salt and rice flour, and fermented for seven days. LAB were isolated using selective media and identified by macroscopic and microscopic morphological analysis and short biochemical tests such as catalase, oxidase and Kliger's iron agar (KIA) test. Probiotic potential of LAB was investigated by acid, salt, temperature tolerance and sugar including glucose, fructose, sucrose, xylose and lactose fermentation test. Four distinct single colonies were isolated from four different kimchi preparations. All isolated bacteria were identified as lactic acid bacteria and found gram positive, non-spore forming, survive in both aerobic and anaerobic condition, catalase and oxidase negative. Isolated LAB survive in both highly acidic (pH 2) and alkaline (pH 8) medium, up to 4% NaCl concentrations and at temperatures ranging from 4°C to 55°C. The isolated LAB have also ability to ferment sugars. These findings reveal that isolated LAB found suitable to survive in the environment of human gastrointestinal tract and have probiotic potential. Bangladesh Pharmaceutical Journal 27(1): 103-109, 2024 (January)

Persulfate Activation Using Biochar from Pomegranate Peel for the Degradation of Antihypertensive Losartan in Water: The Effects of Pyrolysis Temperature, Operational Parameters, and a Continuous Flow Reactor

Biochar derived from pomegranate peel at different pyrolysis temperatures (450, 600, and 850 °C) was synthesized and characterized by BET, XRD, FTIR, and SEM-EDX. Its catalytic efficiency in the degradation of the antihypertensive losartan (LOS) in the presence of sodium persulfate was examined. The biochar pyrolyzed at 850 °C exhibited higher catalytic activity, which was correlated with the greater surface area and higher concentration of minerals on its surface. Interestingly, despite adsorption being favored at alkaline pH, pH 3 showed the highest LOS degradation. LOS decomposition followed pseudo-first-order kinetics. The addition of persulfate significantly increased LOS reduction, while the presence of inorganic and organic water matrix constituents such as sodium chloride, bicarbonate, and humic acid inhibited the oxidation. Experiments conducted with radical scavengers revealed that both hydroxyl and sulfate radicals, as well as singlet oxygen, participated in LOS decomposition, with the former being the dominant species. Using a continuous flow reactor, the system exhibited a satisfactory steady-state performance of 90% LOS removal for 114 h. Afterward, a moderate decrease in performance was observed, which can be attributed to the alteration of the catalyst’s surface and mineral dissolution due to acidity.

Formation of halonitromethanes from benzylamine during UV/chlorination: Impact factors, toxicity alteration, and pathways.

Halonitromethanes (HNMs), a representative nitrogen-containing disinfection byproduct, have gained significant concerns due to their higher cytotoxicity and genotoxicity. UV/chlorination is considered a promising alternative disinfection technology for chlorination. This study aimed to investigate the HNMs formation from benzylamine (BZA) during UV/chlorination. The experimental results revealed that the yields of HNMs initially raised to a peak then dropped over time. Higher chlorine dosage and BZA concentration promoted the formation of HNMs, whereas alkaline pH inhibited their formation. The presence of bromine ion (Br-) not only converted chlorinated-HNMs (Cl-HNMs) to brominated (chlorinated)-HNMs Br (Cl)-HNMs) and brominated-HNMs (Br-HNMs) but also enhanced the total concentration of HNMs. Besides, the calculated cytotoxicity index (CTI) and genotoxicity index (GTI) of HNMs were elevated by 68.97% and 60.66% as Br- concentration raised from 2 to 6µM. The possible formation pathways of HNMs from BZA were proposed based on the intermediates identified by a gas chromatography/mass spectrometry (GC/MS). In addition, the formation rules of HNMs in actual water verified the results in deionized water during UV/chlorination. The results of this study provide basic data and a theoretical basis for the formation and control of HNMs, which is conducive to applying UV/chlorination.

Effect of Nitrogen and Sulphur Levels on Growth Attributes and Yield of Indian Mustard [Brassica juncea (L.) Czern &amp; Coss] in Vindhya Plateau Region of Madhya Pradesh, India

In the Rabi season of 2022, a field experiment was conducted in the Vindhya plateau region of Madhya Pradesh at the agricultural field of SAGE University Bhopal. The objective was to investigate the impact of nitrogen and sulfur nutrition on the growth and yield of Indian mustard (Brassica juncea L.). The experimental soil, characterized as sandy loam with a slightly alkaline pH, exhibited good drainage. Despite having a moderate amount of available phosphorus and potassium, the soil had low levels of organic carbon and nitrogen, with a low electrical conductivity of 1.65 dS/m (1:2, soil: water).&#x0D; The experiment comprised 27 nitrogen and sulfur treatment combinations in a split-plot design with three replications. The treatments included three nitrogen levels (100, 120, and 140 kg ha-1) and three sulfur levels (20, 40, and 60 kg ha-1). The mustard variety Giriraj was cultivated, and the study focused on evaluating the effects of these treatments on growth, yield, and nutrient uptake.&#x0D; Results indicated that various mustard crop attributes, such as plant height, number of green leaves-1, branches plant-1, siliqua plant-1, seeds siliqua-1, and 1000 seed weight, as well as yields (biological, seed, and oil yield), exhibited significant increases with rising nitrogen levels from 100 kg N ha-1 to 140 kg N ha-1. Similarly, applying 60 kg S ha-1 resulted in maximum plant height, number of green leaves, dry matter production, oil yield, and the highest net returns among sulfur levels.&#x0D; The combination of 140 kg N ha-1 and 60 kg S ha-1 proved to be cost-effective, leading to increased yields, net returns, and a higher B:C ratio compared to other nitrogen and sulfur levels. Therefore, this study recommends the application of 60 kg S ha-1 and 140 kg N ha-1 for enhancing mustard crop yields, net returns, and the benefit-cost ratio.

Water quality monitoring of welang river basin

The Welang watershed, located in Malang Regency and Pasuruan Regency, has diverse human activities that can affect watershed hydrology, one of which is related to water quality. The purpose of this research is to determine the current water quality of the Welang watershed. This research was conducted in March 2023 - June 2023, which was conducted using random purposive samples with parameters of sunlight intensity, humidity, air temperature, water temperature, pH, TDS, brightness, chlorine, bromine, lead, nitrate, nitrite, fluoride, iodine, cyanuric acid, carbonate root, and total alkalinity. From this study, it was obtained that the upstream part of the Welang River on the Arjuno side and Bromo side contained Chlorine (Cl), Bromine (Br), Iron (Fe), Lead (Pb), Nitrate (NO3-), Nitrite (NO2-), Fluoride (F-), and Carbonate Root (CO3 2–). Meanwhile, the middle part of the Welang River dominantly has the same content, but no Iron (Fe) was found but instead Cyanuric Acid C3N3(OH)3. Meanwhile, the downstream part of the Welang River contained Chlorine (Cl), Copper (Cu), Lead (Pb), and Fluoride (F-).

Environmental physical factors produce mitotic aberration and multicellularity in the ovarian cancer cell line SKOV3

The spread of ovarian cancer (OC) to the coelomic cavity triggers the secretion and accumulation of ascitic fluid (AF). Although its biochemical composition has been well studied, less is known about the implications of physical factors such as the pH and the mechanical properties of the AF for the malignancy of tumor cells. In this work, we investigated the effect of pH and the mechanical properties of AF on cell proliferation and mitotic morphology. We employed biopsies from patients with OC and the SKOV3 cell line as an in vitro model of OC with HeLa cells as controls. Sections of each tumor were stained with HE, analyzed, and related to clinical data. AF from patients with OC exhibited an alkaline pH (ranging from 7.3 to 7.8). Compared to control conditions, the 3 AFs significantly enhanced the proliferation of SKOV3 and HeLa cells. These effects were more pronounced at a more alkaline pH. In addition, we found that AFs have different densities that correlated with a significant increase in multinucleated tumor cells and severe morphological defects in cells undergoing mitosis. In agreement with these data, we found that higher concentrations of soft agar provoked significantly higher numbers of multinucleated and morphologically abnormal SKOV3 cells with no effect on HeLa cells.We conclude that an alkaline pH and greater rigidity could enhance the metastatic potential of OC cells. We propose that these two physical factors could be parameters of clinical importance as predictors of malignancy.