Nuclear reactor power systems could revolutionize space exploration and support human outpost on the moon and Mars. This paper reviews various energy conversion technologies for use in space reactor power systems and provides estimates of the system's net efficiency and specific power, and the specific area of the radiator. The suitable combinations of the energy conversion technologies and the nuclear reactors, classified based on the coolant type and cooling method, for best system performance and highest specific power, are also discussed. In addition, a number of power system concepts with both static and dynamic energy conversion, but with no single point failures in reactor cooling, energy conversion and heat rejection, and for nominal electrical powers up to 110 kW e, are presented. The first two power systems employ reactors cooled with lithium and sodium heat pipes, SiGe thermoelectric (TE) and alkali-metal thermal-to-electric conversion (AMTEC), and potassium heat pipes radiators. The reactors heat pipes operate at a fraction of the prevailing capillary or sonic limit, and in the case of a multiple heat pipes failure, those in the adjacent modules remove the additional heat load, thus maintaining the reactor adequately cooled and the power system operating at a reduced power. The third power system employs SiGe TE converters and a liquid metal cooled reactor with a divided core into six sectors that are neurotically and thermally coupled, but hydraulically decoupled. Each sector has a separate energy conversion loop, a heat rejection loop, and a rubidium heat pipes radiator panel. When a core sector experiences a loss-of-coolant, the fission power of the reactor is reduced, and that generated in the sector in question is removed by the circulating coolant in the adjacent sectors. The fourth power system employs a gas cooled reactor with a core divided into three identical sectors, and each sector is coupled to a separate Closed Brayton Cycle (CBC) loop with He–Xe binary mixture (40 g/mol) working fluid, a secondary loop with circulating liquid Nak-78, and two water heat pipes radiator panels.
Read full abstract