Liquid Crystal Alignment Layer Research Articles

Tunable alignment of liquid crystals between anisotropic polyacrylamide thin layer

We report uniform liquid crystal (LC) alignment on a polyacrylamide (PAM) film via ion beam (IB) treatment. The IB incidence angle is adjusted from 15° to 75°. Physicochemical modifications caused by the IB process are investigated by atomic force microscopy and x-ray photoelectron spectroscopy. Low IB incidence results in biased and bumpy surfaces, whereas high IB incidence forms isotropic and smooth surfaces; both of these are unsuitable for uniform LC alignment. The 45° IB incidence induces anisotropic surface chemical reformations, and these modifications induce van der Waals forces between the LCs and modified PAM, thereby leading to uniform LC alignment. The LC alignment state is verified by polarized optical microscopy and pretilt angle. The electro-optical characteristic of the modified PAM showed excellent switching performance in twisted-nematic LC system. Thus, the IB-treated PAM film is a good candidate for LC alignment layers and suitable for LC device applications.

Physicochemically modified high-resolution tin oxide thin film using soft imprinting.

We carried out nanoimprinting lithography on solution-processed tin oxide (SnO) film for use as a liquid crystal (LC) alignment layer, for which we used a parallel configuration. To transfer the nanostructures onto the SnO film, we conducted an experiment according to curing, from which fine nanostructures on the SnO film were obtained at a curing temperature of 200 °C. These acted as a guide for the arrangement of the LC molecules and induced geometric restriction which minimized elastic distortion energies, and so the LC molecules could be aligned in the direction of the nanostructures. The LC alignment state was investigated using polarized optical microscopy, and the pre-tilt angle was measured using a crystal rotation method. With high thermal endurance and drastically low power consumption, the nano patterned SnO was shown to be a promising candidate for LC applications. The nanopatterning process combined with nanoimprinting lithography and solution-processed inorganic materials exhibited the possibility of broadening the features of nanostructure-mounted applications, including LC devices.

Physicochemically modified anisotropic polyacrylamide thin film via ion‐beam treatment for liquid crystal system

AbstractWe investigated ion‐beam (IB)‐treated polyacrylamide (PAM) film as a liquid crystal (LC) alignment layer. Polarized optical microscopy and pretilt angle analysis show the uniform LC alignment status. Atomic force microscopy shows the IB etching effect, and X‐ray photoelectron spectroscopy indicates the formation of carbon–oxygen bonds on the surface, which ensured the uniform alignment of LC molecules via van der Waals forces interaction. The reformed PAM films also had good thermal budgets and optical transparency for the LC system. The IB‐treated PAM films demonstrated stable electro‐optical performances in a twisted nematic LC system. Hence, IB treatment can be an effective method to apply several polymer materials to the LC alignment layer, and IB‐irradiated PAM films have remarkable potential for use in the LC system.

Physical Properties of Thermally Crosslinked Fluorinated Polyimide and Its Application to a Liquid Crystal Alignment Layer.

This study demonstrated the use of a thermally crosslinked polyimide (PI) for the liquid crystal (LC) alignment layer of an LC display (LCD) cell. Polyamic acid was prepared using 4,4′-oxydianiline (ODA) and 4,4′-(hexafluoroisopropylidene) diphthalic anhydride (6FDA). The 6FDA−ODA-based polyimide (PI) prepared by the thermal cyclic dehydration of the polyamic acid (PAA) was soluble in various polar solvents. After forming a thin film by mixing trifunctional epoxide [4-(oxiran-2-ylmethoxy)-N,N-bis(oxiran-2-ylmethyl)aniline] with the 6FDA−ODA-based PAA, it was confirmed that thermal curing at −110 °C caused an epoxy ring opening reaction, which could result in the formation of a networked polyimide not soluble in tetrahydrofuran. The crosslinked PI film showed a higher rigidity than the neat PI films, as measured by the elastic modulus. Furthermore, based on a dynamic mechanical analysis of the neat PI and crosslinked PI films, the glass transition temperatures (Tgs) were 217 and 339 °C, respectively, which provided further evidence of the formation of crosslinking by the addition of the epoxy reagent. After mechanical rubbing using these two PI films, an LC cell was fabricated using an anisotropic PI film as an LC alignment film. LC cells with crosslinked PI layers showed a high voltage holding ratio and low residual direct current voltage. This suggests that the crosslinked PI has good potential for use as an LC alignment layer material in advanced LCD technologies that require high performance and reliability.

Nanopattern transfer on bismuth gallium oxide surface via sol-gel stamp process applied for uniform liquid crystal alignment

A convenient aligning method using nanoimprint lithography is introduced. Sol-gel-processed bismuth gallium oxide (BGO) thin films that are one-dimensionally nanopatterned by polydimethylsiloxane molds are used for the liquid crystal (LC) alignment layer. The one-dimensional nanopatterns are transferred to the films at a curing temperature of 250 °C. Atomic force microscopy data present clear line grooves on the surfaces, which allow the LCs to align parallel to this pattern in one direction. Polarized optical microscopy and pre-tilt angle data support uniformity of the LC alignment, indicating that the surface nanopatterns act as alignment guides for LC molecules. X-ray photoelectron spectroscopy data shows active thermal oxidation at a curing temperature of 250 °C, which contributes to nanopattern transfer on BGO film. Thermal endurance tests of the BGO films show good thermal stability until 180 °C. The twisted nematic cells in the BGO layer also show superior electro-optical performances compared with the conventional rubbed polyimide layer. From these characteristics of the nanopatterned BGO alignment layer and owing to its simple fabrication, we expect that this new alignment technique can be used for producing next-generation LC devices to replace the conventional rubbing process.

Flicker‐Free Fringe‐Field Switching Liquid Crystal Display Operable at Extremely Low Frequencies for Power Saving

The cover illustrates the fringe-field switching liquid crystal (LC) mode that is operable at extremely low-frequency regimes for power-saving in portable displays without image flickering issues. The ionic charges within LCs are effectively trapped by the fullerene-doped LC alignment layer. Further details can be found in the article number 2100174 by Hak-Rin Kim and co-workers.

Inch-scale graphene-based LC tunable phase retarders: Experimental study of surface interaction between liquid crystal-polyimide-graphene layers

Recently Liquid Crystal (LC) devices open new route for the next generation optical elements revealing on novel materials that come to a scene, among which graphene endorse amazing capabilities. Herein, we perform detailed study of the surface interaction between LC molecules, graphene (single and multilayer) and alignment layer during assembling tunable LC phase retarders on arbitrary substrates. By considering the surface free energy of graphene a proper selection of polyimide (PI) as a polar layer for non-contact planar alignment of LC molecules is presented. Surface anchoring energy and pre-tilt angle value have been determined to characterize the interfaces at the boundary and their impact on the dynamic performances of assembled LC devices. Besides the excellent phase modulation repeatability over the large-scale area of retrofitted LC structures, an electrically tunable LC phase retarder supported by graphene on PDMS substrate that exhibits great potential for future ITO-free integrated photonic devices and bio-oriented technologies is demonstrated.

Uniformly aligned liquid crystal molecules on reformed poly(ethylene-co-vinyl acetate) layers driven by ion beam exposure

ABSTRACT The characteristics of a poly(ethylene-co-vinyl acetate) (PEVA) film formed by spin coating process and ion beam (IB) irradiation was investigated with irradiation times. A physicochemical analysis was used to analyse the suitability of the PEVA film as a uniform liquid crystal (LC) alignment layer. Atomic force microscopy (AFM) revealed an increased surface roughness after IB irradiation. X-ray photoelectron spectroscopy (XPS) analysis showed IB irradiation broke the polymer branches and increased the oxygen concentration and bonding on the surface. These derived the strong Van der Waals forces and dipole-dipole interactions between the PEVA surface and LCs. The IB irradiation generated surface anisotropy on the PEVA film and unidirectional LC alignment was achieved. Polarised optical microscopy (POM) and pre-tilt angle measurements were carried out to show the uniform LC alignment. The transmittance curve exhibited a high optical performance. These results show the promising capabilities of IB irradiated PEVA film as an alignment layer in LC displays.

Flicker‐Free Fringe‐Field Switching Liquid Crystal Display Operable at Extremely Low Frequencies for Power Saving

A fringe‐field switching (FFS) liquid crystal (LC) mode used with a negative dielectric LC (n‐LC) that is operable at an extremely low‐frequency signal voltage regime, without image flickering, is proposed. By doping charge‐trapping fullerenes (doping concentration: 0.2 wt%) into a low‐resistivity polyimide LC alignment layer of the FFS n‐LC mode, the mobile ionic‐charge density within the n‐LC layer can be drastically decreased. Thus, excellent voltage‐holding ratios of 98.24% and 87.91% are achievable in the proposed FFS n‐LC mode at low operation frequencies of 0.5 Hz and 0.2 Hz, respectively, corresponding to the improvement rates of 155.69% and 1127.05% at each operation frequency, compared with the FFS n‐LC mode without the fullerene doping case. The evaluation results by the modulation flicker level reveal that the operation frequency of the proposed device scheme can be decreased significantly (≈0.2 Hz) without inducing the perceptible image‐flickering problems.

Surface-anchored alkylated graphene oxide as a two-dimensional homeotropic alignment layer for nematic liquid crystals

Graphene oxide (GO) is one of the thinnest two-dimensional (2D) organic materials and has been investigated for application in various fields due to its excellent mechanical and optical properties. The unique planar structure and hydrophilic functional groups allow GO to spontaneously form various nanoarchitectures. Herein, we report an unprecedented methodology to achieve the homeotropic alignment of nematic liquid crystals (NLCs) using surface-anchored alkylated graphene oxide (AGO). The GO is functionalized by amino reactions with dodecylamine to impart amphiphilic characteristics. This AGO spontaneously forms a 2D-alignment layer on indium tin oxide surface via polar affinity, and the hydrophobic alkyl chains of AGO guide the constant direction of the NLCs. Furthermore, a study on the effect of the alkylation ratio of AGO on the NLC orientation was conducted, and the achievement of a 2D-alignment layer based on the optimal AGO successfully resulted in the initial homeotropic orientation of the NLCs without any defects. Compared to a conventional polymer alignment layer, it showed a comparable alignment ability, and exhibited an improved optical transmittance due to the ultrathin nature of the AGO alignment layer. This new modus of NLC vertical alignment based on the use of AGO can expand the utility of functionalized GO.

Surface modification of a poly(ethylene-co-vinyl acetate) layer by ion beam irradiation for the uniform alignment of liquid crystals

The post-processing of a poly(ethylene-co-vinyl acetate) (PEVA) film by ion-beam (IB) irradiation is described herein for use as a liquid crystal (LC) alignment layer. Various film curing temperatures are investigated in order to achieve a stable film prior to IB irradiation, and a uniform and homogeneous LC alignment with superior optical transparency is obtained at a curing temperature of 130 °C. The chemical and morphological effects of IB irradiation are further examined by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM). Although the surface morphology exhibits a random pattern, the IB irradiation is found to modify the chemical characteristics of the PEVA surface by simultaneously inducing van der Waals forces and strong dipole-dipole interactions with the LCs, thus leading to unidirectional LC alignment. In addition, LC cells are fabricated from the IB-irradiated PEVA films, and the LC alignment state is confirmed by polarized optical microscopy and pre-tilt angle measurements. Further, the high transparency of the deposited PEVA film compared to that of ITO-coated glass is demonstrated via transmittance measurement. In view of this superior performance, the IB-irradiated PEVA film is a promising alternative for advanced LC displays.

High-quality nano structures fabrication on organic/inorganic hybrid thin films by using UV nanoimprint lithography

In this study, UV nanoimprint lithography (NIL) was conducted with a hybrid mixture of tin oxide and a UV-curable polymer to fabricate 1-D nanostructures on a thin film. It was confirmed through chemical and physical surface analyses that a hybrid thin film with high-resolution nanostructures had been successfully fabricated. In particular, nanostructures with an amplitude of 49.354 nm and a wavelength of 0.768 μm, which are the most similar to the mold used, were achieved at 3 min UV exposure time. Afterward, they were applied to a liquid crystal (LC) device as an alignment layer, with which uniform and homogeneous LC alignment were achieved due to the anisotropic characteristics and geometric restrictions caused by fabricated nano structures. In addition, a high thermal budget was obtained due to the thermal endurance of the hybrid thin films with an LC alignment performance of a UV exposure time of 3 min. Furthermore, the electro-optical performance under this condition was superior to LC devices with conventional rubbed polyimide layers From the results, it was determined that using the UV-NIL process on a hybrid mixture of tin oxide and a UV-curable polymer created high-resolution 1-D nano structures on films that can be used this as LC alignment layers with strong potential for high-quality LC applications.

Vertical Alignment of Liquid Crystals on Comb-Like Renewable Chavicol-Modified Polystyrene.

This study demonstrates liquid crystal (LC) alignment behaviors on the surface of phytochemical-based and renewable chavicol-modified polystyrene (PCHA#, # = 20, 40, 60, 80, and 100, where # represent the molar content of chavicol moiety in the side group) via polymer modification reactions. Generally, a LC cell fabricated with a polymer film containing a high molar content of the chavicol side group exhibited a vertical LC alignment property. There is a correlation between the vertical alignment of LC molecules and the polar surface energy value of the polymer films. Therefore, vertical LC alignment was observed when the polar surface energy values of these polymer films were smaller than about 1.3 mJ/m2, induced by the nonpolar chavicol moiety having long and bulky carbon groups. Aligning stability under harsh conditions such as ultraviolet (UV) irradiation of about 5 J/cm2 was observed in the LC cells fabricated from PCHA100 film. Therefore, it was found that the plant-based chavicol-substituted polymer system can produce an eco-friendly and sustainable LC alignment layer for next-generation applications.

Alignment Layer of Liquid Crystal Using Plant-Based Isoeugenol-Substituted Polystyrene.

We synthesized a series of renewable and plant-based isoeugenol-substituted polystyrenes (PIEU#, # = 100, 80, 60, 40, and 20, where # is the molar percent content of isoeugenol moiety), using polymer modification reactions to study their liquid crystal (LC) alignment behavior. In general, the LC cells fabricated using polymer film with a higher molar content of isoeugenol side groups showed vertical LC alignment behavior. This alignment behavior was well related to the surface energy value of the polymer layer. For example, vertical alignments were observed when the polar surface energy value of the polymer was smaller than approximately 3.59 mJ/m2, generated by the nonpolar isoeugenol moiety with long and bulky carbon groups. Good alignment stability at 100 °C and under ultraviolet (UV) irradiation of 15 J/cm2 was observed for the LC cells fabricated using PIEU100 as a LC alignment layer. Therefore, renewable isoeugenol-based materials can be used to produce an eco-friendly vertical LC alignment system.

Anchoring energy of nematic liquid crystals on zinc oxide film

The potential of a ZnO transparent electrode as a liquid crystal (LC) alignment layer was assessed by measuring the surface LC anchoring strength. This can be determined by observing the direction of the William domain, which is one of the many patterns generated in liquid crystal electroconvection. The surface of the ZnO layer is modulated by a conventional rubbing method with a rubbing machine and ion beam method to align the LCs and thus, allow the ZnO layer to act as an LC alignment layer. To increase the surface anchoring energy of the ZnO film further, a linear ion-beam irradiation was carried out after rubbing the ZnO layer for the synergistic effect of the alignment techniques, after which the azimuthal surface anchoring energy of the ZnO layer was about 2.23 $$\times$$ 10–5 J/m2, which is comparable to the conventional alignment layer, polyimide, used at currently LC displays.

Environmentally sustainable color-switchable alignment layer formed by nanoscale interfacial self-assembly of chlorophyll biomolecules.

The precise alignment of liquid crystals (LCs) is crucial in the fabrication of LC devices because this arrangement can determine the performance of optoelectronic devices. Conventionally, LC alignment is achieved using a thin layer of elaborate polyimide materials. However, these materials require not only complicated synthetic processes using significant amounts of toxic chemicals, but also a time-consuming high-temperature curing process involving a long period of energy consumption. Thus, the development of environmentally sustainable alignment materials is a fundamental way to conserve energy and reduce the use of hazardous substances. Herein, we present an environmentally sustainable strategy to fabricate a functional vertical alignment layer for nematic LCs through interfacial self-assembly of chlorophyll biomolecules. A novel functional alignment layer was prepared using a simple and environmentally-friendly approach by doping chlorophyll extracted from plants, which are abundant in nature, into LC medium. It has been experimentally proven that amphiphilic chlorophyll biomolecules were self-assembled on the indium tin oxide surface through hydrogen bonding between a porphyrin ring and hydroxyl group, and therefore the stable homeotropic alignment of LC was achieved through the van der Waals interaction between the hydrocarbon tail and LC molecule. In addition, the nanoscale self-assembled alignment layer of chlorophyll molecules exhibited color-switchable behavior under visible and ultraviolet light. This simple and eco-friendly approach provided excellent electro-optical properties comparable to those of a commercial polyimide layer, while achieving a very stable and cost-effective vertical alignment layer capable of color switching.

Shear Induced TiO2 Nano Structure Using Brush-Coating for Liquid Crystal Alignment

We have developed a very useful and cost-effective liquid crystal (LC) alignment layer of brush-coated TiO2 that is solution-processable for twisted nematic (TN) LC cells. TiO2 was prepared via the sol-gel method. The TiO2 solution was brush-coated on the substrate, followed by an annealing process. During the brush-coating process, a retracting force is generated on the deposited TiO solutions along the coating direction. The annealing process hardens the TiO2 and generates shearing stress arising from the retracting force along the brush-coating direction. The shearing stress created highly oriented nano/microstructure and uniformly aligned LCs with a stable pretilt angle of 0.6°. TN mode LC cells based on brush-coated TiO2 exhibited a performance of 12.5 ms of response and a threshold voltage of 1.8 V. Our brush-coated TiO2 incorporates two steps of the film deposition and alignment process into one step.

An active carbon-nanotube polarizer-embedded electrode and liquid-crystal alignment.

We report a method for constructing an active optical polarizer using an aligned carbon nanotube (CNT) sheet that is flexible, bendable, transparent, conductive, and also serves to anchor liquid-crystal (LC) molecules. A horizontally aligned CNT sheet was obtained by mechanical stretching from a vertically grown CNT forest, which was then transferred onto a substrate. A liquid polymer was infiltrated into the CNT sheet followed by UV curing, while a part of the CNT sheet was still exposed on the film surface without polymer coating. The polymer-embedded CNT sheet (P-ECS) film with 10 layers of CNT sheets exhibited a good polarization efficiency of 87%, a sheet resistance of 340 Ω□-1, and excellent ability to align LC molecules. The high stability of the P-ECS film was confirmed from the very low variation of sheet resistance (2%) and transmittance (10%) observed during a bending test of 1000 cycles. In addition, a twisted nematic LC device constructed using the P-ECS films shows a good bright-dark switching performance. The P-ECS film functions simultaneously as a transparent electrode, a film-type polarizer, and a LC alignment layer, demonstrating the multi-functionality of the active CNT film. This study thus highlights a wide range of possible applications for active polarizers and flexible displays.

A Study on the Parallel Patterning of Nickel Oxide thin Film for Liquid Crystal Display

I investigated the homogeneous liquid crystal alignment using parallel patterning on nickel oxide thin film. Nickel oxide thin film was prepared by sol-gel process, which is and cost effective method to form oxide thin film. Since the sol-gel process is solution driven method, the patterning on nickel oxide can be achieved by imprinting lithography. Nickel oxide with parallel pattern was used for liquid crystal alignment layer, which can be a alternative to conventional rubbing process to aligning a liquid crystal molecules. As a result, a high transmittance of 83.9% was confirmed for the NiO film, and a stable horizontal orientation pretilt angle of 0.2° occurred in the imprinted NiO film. These results were judged to be a positive level that can be commercialized in the horizontal alignment type liquid crystal display that is currently used universally. Anisotropic characteristics of nickel oxide induced by a parallel pattern leads to the alignment of liquid crystals.

Label-free, color-indicating, and sensitive biosensors of cholesteric liquid crystals on a single vertically aligned substrate.

Biosensors based on liquid crystal (LC) materials can be made by employing the sensitive interfacial effect between LC molecules and alignment layers on substrates. In the past, the optical texture observation method was used in the LC biosensor field. However, the method is limited by a complicated fabrication process and quantitative reproducibility of results that bv evidence that both the reliability and accuracy of LC biosensors need to be improved. In this report, we demonstrate that cholesteric LC (CLC) cells in which one substrate is coated with a vertically aligned layer can be used as a new sensing technology. The chirality of the single vertically anchored (SVA)/CLC biosensor was tested by detecting bovine serum albumin (BSA), a protein standard commonly used in the lab. The colors and corresponding spectrum of the SVA/CLC biosensor changed with the BSA concentrations. A detection limit of 1 ng/ml was observed for the SVA/CLC biosensor. The linear optical properties of the SVA/CLC biosensor produced cheap, inexpensive, and color-indicating detection of biomolecules, and may promote the technology of point-of-care devices for disease-related biomarker detection.