Effect Of Alignment Research Articles

On the Effectiveness of Retrieval, Alignment, and Replay in Manipulation

On the Effectiveness of Retrieval, Alignment, and Replay in Manipulation

Decoupling the effects of collagen alignment and bioceramic incorporation on osteoblast proliferation, differentiation, and mineralization

Biomimetic scaffolds provide the essential biophysical (e.g., surface topography, stiffness) and biochemical cues (e.g., composition) to guide cell morphology, proliferation, and differentiation. Although the effects of biomaterial-directed cues on cell response have been widely reported, few studies have sought to decouple these effects to better understand the interplay between the different physicochemical factors on tissue-specific cell function. Herein, beta-tricalcium phosphate (β-TCP) was incorporated into electrochemically aligned collagen (ELAC) and random collagen threads, and the individual and interactive effects of collagen alignment (i.e., biophysical) and bioceramic incorporation (i.e., biochemical) on osteoblast cell morphology, proliferation, differentiation, and mineralization were investigated. Results showed that collagen alignment in ELAC threads was retained upon β-TCP incorporation. Collagen alignment significantly improved (p < 0.05) the swelling capacity and stability of collagen threads, while β-TCP incorporation showed no such effects. Tensile tests revealed that β-TCP incorporation significantly decreased (p < 0.05) the strength and stiffness of ELAC threads. Significant increase (p < 0.05) in Saos-2 cell orientation and alkaline phosphatase (ALP) activity was observed on ELAC compared to random collagen threads indicating that aligned collagen serves as a key driving factor for osteogenesis. β-TCP incorporation into random collagen threads had no effect on Saos-2 cell function. On the other hand, presence of β-TCP significantly augmented (p < 0.05) Saos-2 cell metabolic activity, differentiation, and mineralization on ELAC threads. Together, these findings suggest that combining collagen alignment and β-TCP incorporation can create robust tissue-mimicking scaffolds for bone regeneration applications.

Synergistic Effects of Energy Level Alignment and Trap Passivation via 3,4-Dihydroxyphenethylamine Hydrochloride for Efficient and Air-Stable Perovskite Solar Cells

Synergistic Effects of Energy Level Alignment and Trap Passivation via 3,4-Dihydroxyphenethylamine Hydrochloride for Efficient and Air-Stable Perovskite Solar Cells

Influence of Spinal Sagittal Alignment in Sitting Posture on the Swallowing Speed of Older Adult Women: A Cross-Sectional Study.

Thoracolumbar kyphosis in sitting posture is associated with forward head posture and may adversely affect swallowing function. However, few studies have investigated the effect of spinal alignment in the sitting posture on the swallowing function of older adults. This cross-sectional study aimed to investigate whether spinal alignment in the sitting posture influences the swallowing function of older adult women. Overall, 18 older adult women (mean age, 69.78 ± 3.66years) without dysphagia were enrolled. Participants were positioned in two sitting postures, namely, comfortable sitting (CS) and thoracic upright sitting (TUS). In each sitting posture, the kyphosis index (using a flexicurve), sagittal angles (head, cervical, shoulder, and pelvic angles; using a digital camera), and cervical range of motion (ROM) were evaluated. Swallowing speed (100-mL water swallowing test), maximum tongue pressure (MTP), and oral diadochokinesis (ODK) were also evaluated. Compared with TUS, CS showed a greater kyphosis index, anterior head translation, and posterior pelvic tilt. CS had greater flexion (p < 0.001) and less extension (p < 0.001) of cervical ROM than TUS. Swallowing speed was significantly decreased in CS compared with TUS (p = 0.008). MTP and ODK were not significantly different between CS and TUS. Thus, changes in sitting posture with spinal alignment may affect swallowing speed. Consequently, adjustments to reduce sitting postural kyphosis in older adult women may improve swallowing speed.

Mosaic integration and knowledge transfer of single-cell multimodal data with MIDAS

Integrating single-cell datasets produced by multiple omics technologies is essential for defining cellular heterogeneity. Mosaic integration, in which different datasets share only some of the measured modalities, poses major challenges, particularly regarding modality alignment and batch effect removal. Here, we present a deep probabilistic framework for the mosaic integration and knowledge transfer (MIDAS) of single-cell multimodal data. MIDAS simultaneously achieves dimensionality reduction, imputation and batch correction of mosaic data by using self-supervised modality alignment and information-theoretic latent disentanglement. We demonstrate its superiority to 19 other methods and reliability by evaluating its performance in trimodal and mosaic integration tasks. We also constructed a single-cell trimodal atlas of human peripheral blood mononuclear cells and tailored transfer learning and reciprocal reference mapping schemes to enable flexible and accurate knowledge transfer from the atlas to new data. Applications in mosaic integration, pseudotime analysis and cross-tissue knowledge transfer on bone marrow mosaic datasets demonstrate the versatility and superiority of MIDAS. MIDAS is available at https://github.com/labomics/midas.

Relationship Between Ownership Concentration, Firm Size, and Earnings Quality in Indonesian Companies

This study aimed to investigate the influence of ownership concentration and firm size on earnings quality in Indonesian companies. Research about the influence of ownership concentration and firm size on earnings quality still provides mixed results. Therefore, it became important to conduct research about it, especially in the context of Indonesian companies. This study used the alignment effect hypothesis as a basis for hypothesis development. The sample of this study consists of 92 Indonesian companies from 2013–2018, with a total of 522 observations. The data analysis technique is multiple regression analysis. The result of this study showed that ownership concentration had a positive influence on earnings quality. In contrast, firm size had no influence on earnings quality. In conclusion, the result of this study supported the alignment effect hypothesis, stating that the interest of the majority shareholder is aligned with that of the minority shareholder, therefore improving earnings quality.

Effect of lower limb alignment on outcome after lateral unicompartmental knee arthroplasty: a retrospective study

PurposeThe objective of this study was to investigate the correlation between lower limb alignment and patient outcomes after lateral unicompartmental knee arthroplasty (LUKA).MethodsIn this retrospective study, the information of 51 patients who underwent lateral UKA was collected after an average of 27months of follow-up (13 to 60 months). Evaluation indicators include the AKS and WOMAC score. The Kellgren-Lawrence grade is used to evaluate the severity of osteoarthritis, while the hip-knee-ankle (HKA) angle is utilized to measure the valgus angle of lower limb alignment.ResultPatients with postoperative valgus (≥ 3°) alignment had the best outcomes, while those with varus (≤-3°) alignment had the worst outcomes (p < 0.001). Furthermore, it was noted that patients with preoperative mild valgus (≤ 4°) alignment had worse postoperative outcomes than those with severe valgus (≥ 7°) alignment (p < 0.05). The study also revealed a positive correlation between postoperative valgus and WOMAC scores (p < 0.001), whereas a negative correlation was observed between the change in valgus angle and WOMAC scores (p = 0.005).ConclusionDuring follow-ups, we found that lower limb alignment seems to be an independent predictor of postoperative outcomes. It is recommended that more than 3° of valgus alignment should be maintained after LUKA. Surgeons performing lateral UKA should be cautious of overcorrecting alignment, particularly in patients with preoperative mild valgus alignment.

Varus placement of the tibial component reduces the potential risk of fracture with adequate bony coverage in the Oxford unicompartmental knee arthroplasty

A short keel-cortex distance (KCD), especially to the posterior cortex, is a potential risk factor for tibial plateau fracture after Oxford mobile-bearing unicompartmental knee arthroplasty (OUKA). This study aimed to evaluate the effect of tibial component alignment in the coronal plane and tibial proximal morphology on the KCD. Included in this study were 51 patients scheduled for primary Oxford medial unicompartmental knee arthroplasty (UKA). The anterior and posterior KCD were preoperatively assessed using 3D simulation software with the component set perpendicular to the tibial mechanical axis (neutral), 3° valgus, 3° varus, and 6° varus, relative to neutral alignment. We evaluated the existence of overhanging medial tibial condyle where the medial eminence line, the line including the medial tibial eminence parallel to the tibial axis, passes outside of the tibial shaft. In all component alignments, patients with a medial overhanging condyle had significantly shorter posterior KCD than those without. In patients with a medial overhanging condyle, the posterior KCD significantly increased when the tibial component was placed in 3° varus (4.6 ± 1.5 mm, P = 0.003 vs neutral, P < 0.001 vs 3° valgus) and 6° varus (5.0 ± 1.4 mm, P < 0.001 vs neutral, P < 0.001 vs 3° valgus) compared with in neutral (3.5 ± 1.9 mm) or 3° valgus (2.8 ± 1.8 mm). In OUKA, varus implantation increased the KCD. This could potentially decrease the risk of fracture, even in knees with the overhanging medial condyle. Conversely, valgus implantation of the tibial component shortened the KCD, and should therefore be avoided.

Modeling of vehicle carbon emissions on horizontal curve road sections

The high carbon emissions of vehicles traveling on horizontal curve road sections cannot be ignored. Facing the difficulty of accurately quantifying the carbon emission of driving on horizontal curves and the unknown causes of high carbon emission, this study proposes to construct a carbon emission prediction model applicable to road sections with different planar geometries. The direct and indirect effects of horizontal curve alignment on vehicle carbon emissions are represented in the model in terms of travel stabilization and speed changes, respectively. A lateral force coefficient parameter was introduced into the model to integrate the carbon emission quantification problem for different planar geometry sections. Meanwhile, field tests were conducted to assess the reliability of the model and the research findings. The model reveals that the geometric parameters of horizontal curves that affect carbon emissions are the radius of the circular curve, the superelevation, and the length of the gentle curve. The root causes of high carbon emissions on horizontal curve road sections are curve driving resistance and speed fluctuations. Under the free-flow driving condition of the highway, the maximum curve radius affecting the carbon emissions of passenger cars and trucks is 400 m and 550 m, respectively. The research results can realize the carbon emission quantification of vehicles on the road sections with different plane geometries. Also, it is helpful to control the high carbon emission of vehicles traveling on horizontal curve road sections.

Infiltrated 2D/3D Heterojunction with Tunable Electric Field Landscape for Robust Inverted Perovskite Solar Cells with over 24% Efficiency.

In inverted perovskite solar cells, conventional planar 2D/3D perovskite heterojunctions typically exhibit a type-II band alignment, where the electric field tends to drive the electron motion in the opposite direction to the direction of electron transfer. Here, a 2D/3D gradient heterojunction is developed by allowing the 2D perovskite to infiltrate the 3D perovskite surface along the grain boundaries using the interaction between the organic cation of the 2D perovskite and the pseudohalogen thiocyanate ion (SCN-), which has the ability to diffuse downward. The infiltrated 2D perovskite not only fills the gaps of grain boundaries with improved structural stability, but it also reconstructs the original landscape of the electric field toward the n-doped surface to enable more rapid electron transfer and weaken the adverse type-II band alignment effect. Since 2D perovskite seals the GBs, the nonvolatile SCN- can accumulate at the top and bottom dual interfaces, releasing residual stress and significantly inhibiting nonradiative recombination. The device exhibits an excellent efficiency of 24.76% (certified 24.29%) and long-term stability that is >90% of the original PCE value after 800h of heating at 85°C or in high humidity (≈65%).

The effect of political alignment on street‐level bureaucrat job satisfaction and motivation

AbstractThis paper examines how political alignment influences the job satisfaction and motivation of street‐level bureaucrats (SLBs)—low‐level frontline workers implementing policies while interacting directly with the public. I argue that political alignment affects SLBs' job satisfaction and motivation to work harder through three theoretical channels: (1) policy‐driven effects, particularly demoralization from implementing disagreeable policies; (2) spill‐over effects from other policy areas; and (3) political person‐organization fit effects, which result in decreased pride in their employer. Using the International Social Survey Program data from 34 countries, and panel data from the German Socio‐Economic Panel, tracking 880 respondents over 30 years, I find a robust link between political alignment and job satisfaction and motivation, and evidence for all three links. These findings underscore the importance of considering political alignment as a key factor in understanding and improving street‐level bureaucrat performance beyond policy‐specific and client‐specific contexts.

Effect of short stem alignment on initial fixation, stress transfer, and failure risk.

Short stems are advantageous for revision as they preserve autogenous bone. At present, the method of short-stem installation is determined based on the surgeon's experience. To provide the guideline for installing a short stem, we aimed to investigate the alignment effect on the initial fixation of the stem, stress transfer, and the risk of failure numerically. Models in which the caput-collum-diaphyseal (CCD) angle and flexion angle were hypothetically changed based on the two clinical cases of hip osteoarthritis were analyzed using the non-linear finite element method. The medial settlement of the stem increased in the varus model and decreased in the valgus model. With varus alignment, the stresses acting on the femur were high in the distal to the femoral neck. In contrast, the stresses in the proximal to the femoral neck tend to be higher with valgus alignment, although the difference in the femur stress between varus and valgus alignment was slight. Both initial fixation and stress transmission are lower when the device was placed in the valgus model than in the actual surgical case. In order to obtain initial fixation and suppress stress shielding, it is essential to extend the contact area between the medial portion of the stem and the femur along the bone axis, and to ensure adequate contact between the lateral portion of the stem tip and the femur.

The effects of postoperative malrotation alignment on outcomes of Gartland type III/IV paediatric supracondylar humeral fractures treated by close reduction and percutaneous K-wire fixation

PurposeIn this study, we aimed to investigate the effects of postoperative malrotation alignment on the outcomes of Gartland type III/IV paediatric supracondylar humeral fracture (SCHF) treated by close reduction and percutaneous K-wire fixation.MethodsBetween January 2014 and December 2021, 295 Gartland type III/IV paediatric SCHFs treated by close reduction and percutaneous K-wire fixation were selected for this retrospective study. The demographic, clinical and radiographic parameters of all cases were collected. The lateral rotation percentage (LRP) was measured on X-rays to evaluate postoperative malrotation alignment of the fracture. All cases were categorized into 4 groups according to LRP: LRP ≤ 10% (210, 71.2%), 10% < LRP ≤ 20% (41, 13.9%), 20% < LRP ≤ 30% (26, 8.8%) and LRP > 30% (18, 6.1%). The carrying angle, ranges of multidirectional motions, Mayo Elbow Performance Score (MEPS) and Flynn’s Standard Score (FSS) of the injured elbow were assessed 6 months postoperation and compared among different groups. ROC analysis based on LRP and the excellent/good rate of FSS was performed to determine the acceptable maximum degree of postoperative malrotation alignment.ResultsThere was no difference in the demographic characteristics (age, sex, injured side and fracture type), postoperative Baumann angle, carrying angle or range of forearm rotation among the 4 groups (P > 0.05). The operation time and time from operation to K-wire removal were longer in the 20% < LRP ≤ 30% and LRP > 30% groups than in the LRP < 10% and 10% < LRP ≤ 20% groups (P < 0.001). The shaft condylar angle, range of elbow flexion, MEPS and FSS of the injured elbow 6 months postoperatively were lower in the 20% < LRP ≤ 30% and LRP > 30% groups than in the LRP < 10% and 10% < LRP ≤ 20% groups (P < 0.001). ROC analysis based on LRP and the excellent/good rate of FSS showed an area under the curve of 0.959 (95% CI 0.936–0.983), with a cutoff value of 26.5%, sensitivity of 95.3% and specificity of 90.1%.ConclusionA certain degree of residual malrotation alignment deformity of the SCHF may reduce the shaft condylar angle and extend the time from operation to removing the K-wire and affect elbow function, especially the range of elbow flexion. The acceptable maximum degree of residual malrotation deformity expressed as the LRP value was 26.5%.

Effects of head alignment devices on working memory and postural support during computer work.

The most common risk factor of computer workers is poor head and neck posture. Therefore, upright seated posture has been recommended repeatedly. However, maintaining an upright seated posture is challenging during computer work and induces various complaints, such as fatigue and discomfort, which can interfere working performance. Therefore, it is necessary to maintain an upright posture without complaints or intentional efforts during long-term computer work. Alignment devices are an appropriate maneuver to support postural control for maintaining head-neck orientation and reduce head weight. This study aimed to demonstrate the effects of workstations combined with alignment device on head-neck alignment, muscle properties, comfort and working memory ability in computer workers. Computer workers (n = 37) participated in a total of three sessions (upright computer (CPT_U), upright support computer (CPT_US), traction computer (CPT_T) workstations). The craniovertebral angle, muscles tone and stiffness, visual analog discomfort scale score, 2-back working memory performance, and electroencephalogram signals were measured. All three workstations had a substantial effect on maintaining head-neck alignment (p< 0.001), but only CPT_US showed significant improvement on psychological comfort (p = 0.04) and working memory performance (p = 0.024), which is consistent with an increase in delta power. CPT_U showed the increased beta 2 activity, discomfort, and false rates compared to CPT_US. CPT_T showed increased alpha and beta 2 activity and decreased delta activity, which are not conductive to working memory performance. In conclusion, CPT_US can effectively induce efficient neural oscillations without causing any discomfort by increasing delta and decreasing beta 2 activity for working memory tasks.

β-Hairpin Alignment Alters Oligomer Formation in Aβ-Derived Peptides.

Amyloid-β (Aβ) forms heterogeneous oligomers, which are implicated in the pathogenesis of Alzheimer's disease (AD). Many Aβ oligomers consist of β-hairpin building blocks─Aβ peptides in β-hairpin conformations. β-Hairpins of Aβ can adopt a variety of alignments, but the role that β-hairpin alignment plays in the formation and heterogeneity of Aβ oligomers is poorly understood. To explore the effect of β-hairpin alignment on the oligomerization of Aβ peptides, we designed and studied two model peptides with two different β-hairpin alignments. Peptides Aβm17-36 and Aβm17-35 mimic two different β-hairpins that Aβ can form, the Aβ17-36 and Aβ17-35 β-hairpins, respectively. These hairpins are similar in composition but differ in hairpin alignment, altering the facial arrangements of the side chains of the residues that they contain. X-ray crystallography and SDS-PAGE demonstrate that the difference in facial arrangement between these peptides leads to distinct oligomer formation. In the crystal state, Aβm17-36 forms triangular trimers that further assemble to form hexamers, while Aβm17-35 forms tetrameric β-barrels. In SDS-PAGE, Aβm17-36 assembles to form a ladder of oligomers, while Aβm17-35 either assembles to form a dimer or does not assemble at all. The differences in the behavior of Aβm17-36 and Aβm17-35 suggest β-hairpin alignment as a source of the observed heterogeneity of Aβ oligomers.

Dissociative ionization and post-ionization alignment of aligned O2 in an intense femtosecond laser field.

We examined dissociative ionization of O2 in an intense femtosecond laser field (782 nm, 120 fs, 4 × 1014 W cm-2) by recording the kinetic energy distribution of O+ emitted along the laser polarization direction as a function of the delay time between the pump pulse (9 × 1013 W cm-2) for the molecular alignment and the probe pulse for the dissociative ionization. We found the two distinct rotational revival patterns which are out-of-phase by π with each other in the kinetic energy distribution of O+. One of the patterns shows the dissociative ionization is enhanced when the O2 axis is parallel to the laser polarization direction, suggesting that the ionization is induced by the electron emission from the 3σg orbital. On the other hand, the other pattern shows that the dissociative ionization is enhanced when the O2 axis is perpendicular to the laser polarization direction, suggesting that the ionization is induced by the electron emission from the 1πu orbital. Because of the collection efficiency of the time-of-flight mass spectrometer, the enhancement of the O+ yield at the anti-alignment time delay indicates that the electron emission from the 1πu orbital is followed by the molecular alignment of O2+ in the course of the dissociation. We performed classical trajectory Monte-Carlo simulation of O2+ with the dissociation and rotational coordinates in the light-dressed potential to evaluate the effect of the post-ionization alignment by the probe pulse.

Teenage Dental Alignment, Self-Esteem, Parental Stress and Performance in Schools in Kenya: A Case of Dentplan Dental Surgeons in Kenya

The adolescent period is marked by significant physical and psychological transformations, during which dental appearance can play a pivotal role in shaping self-perception and social interactions. This issue extends beyond the individual to affect the family unit, where parental concern for their child’s wellbeing and the financial implications of orthodontic treatments contribute to heightened stress levels. This, in turn, can disrupt the supportive environment crucial for a teenager’s educational journey. By employing a descriptive research design, this study aimed to conduct an analysis of the current state of teenage dental alignment issues in Kenya, exploring their correlation with self-esteem levels and the subsequent effects on parental stress and academic performance. This study was anchored on Social comparison theory. The target population for the study comprised learners with dental misalignment, their parents or guardians and dental surgeons at Dentplan Dental surgeons in Kenya. The study purposively selected 20 learners with dental misalignment and 3 surgeons to take part in the study. The study used both structured questionnaire and Key Informant Interview (KII) for purposes of collecting primary data. The questionnaires was administered to the learners or their parents, while KII was administered to the surgeons. The quantitative data collected using the questionnaire was analyzed with the aid of SPSS using both descriptive and inferential statistics. The qualitative data gathered using KII was analyzed thematically using content analysis. The findings were presented in tables and narratives. The findings revealed that dental alignment significantly affects self-esteem and school performance among teenagers treated at Dentplan Dental Surgeons in Kenya, with an R squared value of 0.566, indicating that dental alignment explains 56.6% of the variation in these outcomes. The regression coefficients results revealed a significant positive effect of dental alignment on self-esteem and school performance, with a coefficient (B = 0.653, p-value = 0.000).The study concludes that dental alignment significantly affects self-esteem and school performance among teenagers treated at Dentplan Dental Surgeons in Kenya. In view of the findings, the study recommends that dental practitioners should prioritize comprehensive and individualized treatment plans that address both the physical and psychological impacts of dental alignment issues and they should partner with schools for dental check-ups and education early in learners life.

Physics of band-filling correction in defect calculations of solid-state materials.

In solid-state physics/chemistry, a precise understanding of defect formation and its impact on the electronic properties of wide-bandgap insulators is a cornerstone of modern semiconductor technology. However, complexities arise in the electronic structure theory of defect formation when the latter triggers partial occupation of the conduction/valence band, necessitating accurate post-process correction to the energy calculations. Herein, we dissect these complexities, focusing specifically on the post-process band-filling corrections, a crucial element that often demands thorough treatment in defect formation studies. We recognize the importance of these corrections in maintaining the accuracy of electronic properties predictions in wide-bandgap insulators and their role in reinforcing the importance of a reliable common reference state for defect formation energy calculations. We explored solutions such as aligning deep states and electrostatic potentials, both of which have been used in previous works, showing the effect of band alignment on defect formation energy. Our findings demonstrate that the impact of defect formation on electronic structure (even deep states) can be significantly dependent on the supercell size. We also show that within band-filling calculations, one needs to account for the possible change of electronic structure induced by defect formation, which requires sufficient convergence of electronic structure with supercell size. Thus, this work emphasizes the critical steps to accurately predict defect formation energy and paves the way for future research to overcome these challenges and advance the field with more efficient and reliable predictive models.

Dielectric Meta-Atoms with Liquid Crystal Alignment Effect for Electrically Tunable Metasurface

Dielectric metasurfaces with tunable functions are increasingly appealing to both the academia and industrial communities. Among the many tuning mechanisms reported so far, metasurface immersed in liquid crystal (LC) stands out as one of the most viable approaches for industrial applications such as Lidar and 3D sensing. However, as with traditional LC devices, alignment processes are necessary for LC-based tunable metasurfaces, leading to additional costs in terms of time and materials. In this paper, we present a novel LC-based tunable metasurface, wherein the alignment of LC is provided by the metasurface structures. LC serves as the dielectric environment for the metasurface with an electrically tunable refractive index. Simultaneously, purposely engineered metasurface induces alignment effects within the LC. The alignment effect of the metasurface on the LC was quantitatively characterized using crossed polarizers. A marked transmission contrast was observed, indicating the high-quality alignment provided solely by the metasurface. Electrical tunability was also measured, recording a maximum modulation depth in transmission amplitude of 94% at near-infrared telecommunication wavelengths. This work highlights the remarkable advantages of LC-based tunable metasurface devices, making them highly valuable for next-generation metasurface-integrated LC on silicon devices.

VR 시청 시 스크린 사이 거리와 VR 렌즈 사이 거리의 정렬이 시기능에 미치는 영향

VR 시청 시 스크린 사이 거리와 VR 렌즈 사이 거리의 정렬이 시기능에 미치는 영향