_ This article, written by JPT Technology Editor Chris Carpenter, contains highlights of paper SPE 211772, “Optimizing Future Drilling-Center Locations Using Advanced Analytics and Machine-Learning Algorithms Offshore Abu Dhabi,” by Rail Salimov, Benoit Jaffres, and Jamal Alblooshi, ADNOC, et al. The paper has not been peer reviewed. _ Long-term development planning requires infill drilling. Because of the limited number of slots in the offshore environment, new drilling centers (wellhead towers) are required. Optimized location of drilling centers can play a major role in reducing drilling expenses. Two main challenges related to wellhead-tower placement are discussed in the complete paper: first, where to place future drilling centers based on subsurface coordinates and drilling constraints; and second, how to allocate dozens of subsurface targets to multiple drilling centers. The drilling-center placement optimization algorithm developed by the authors is based on multiple optimization parameters related to well cost. Introduction To finalize well trajectories, and thus best manage well costs, before the drilling phase, the following detailed analyses are required: - Evaluation of horizontal trajectory in terms of landing point and total depth - Optimization of horizontal drain length - Optimization of the horizontal drain length in the best oil-bearing zone - Torque-and-drag evaluation - Anticollision assessment - Selection of optimal completion accessories However, for most giant offshore fields with complex plans, hundreds or even thousands of infill developments are required. Definition of optimal locations and allocations of wells to drilling centers will require multiple iterations of already tedious work. An alternative methodology is described in the complete paper that allows finalization of future facility placement with the use of open-source machine-programming tools and applied mathematics. The presented methodology was deployed successfully on two major offshore fields where current production is connected through wellhead towers. Evolution of the development plan and the ramp-up of production means that additional drilling is planned during the next 10 years. Approximately 100–150 development wells are planned to be drilled from yet-to-be-constructed wellhead towers. One of the main challenges in achieving cost efficiency is effective placement of the new towers to minimize the total drain length of all development wells. The methodology covers the two most important aspects of facility construction that play vital roles in optimization of capital investment in facility expansions of offshore oil and gas fields. These aspects are optimized allocation of future wells to drilling centers and placement of those drilling centers.
Read full abstract