Aldehyde Removal Research Articles

Metabolic pathways for removing reactive aldehydes are diminished in the skeletal muscle during heart failure.

Muscle wasting is a serious complication in heart failure patients. Oxidative stress and inflammation are implicated in the pathogenesis of muscle wasting. Oxidative stress leads to the formation of toxic lipid peroxidation products, such as 4-hydroxy-2-nonenal (HNE), which covalently bind with proteins and DNA and activate atrophic pathways. Whether the formation of lipid peroxidation products and metabolic pathways that remove these toxic products are affected during heart failure-associated skeletal muscle wasting has never been studied. Male C57BL/6J mice were subjected to sham and transverse aortic constriction (TAC) surgeries for 4, 8 or 14weeks. Different skeletal muscle beds were weighed, and the total cross-sectional area of the gastrocnemius muscle was measured via immunohistochemistry. Muscle function and muscle stiffness were measured by a grip strength meter and atomic force microscope, respectively. Atrophic and inflammatory marker levels were measured via qRT‒PCR. The levels of acrolein and HNE-protein adducts, aldehyde-removing enzymes, the histidyl dipeptide-synthesizing enzyme carnosine synthase (CARNS), and amino acid transporters in the gastrocnemius muscle were measured via Western blotting and qRT‒PCR. Histidyl dipeptides and histidyl dipeptide aldehyde conjugates in theGastrocnemius and soleus muscles were analyzed by LC/MS-MS. Body weight, gastrocnemius muscle and soleus muscle weights and the total cross-sectional area of the gastrocnemius musclewere decreased after 14weeks of TAC. Heart weight, cardiac function, grip strength and muscle stiffness were decreased in the TAC-operated mice. Expression of the atrophic and inflammatory markers Atrogin1 and TNF-α, respectively, was increased ~ 1.5-2fold in the gastrocnemius muscle after 14weeks of TAC (p < 0.05 and p = 0.004 vs sham). The formation of HNE and acrolein protein adducts was increased, and the expression of the aldehyde-removing enzyme aldehyde dehydrogenase (ALDH2) was decreased in the gastrocnemius muscle of TAC mice. Carnosine (sham: 5.76 ± 1.3 vs TAC: 4.72 ± 0.7nmol/mg tissue, p = 0.04) and total histidyl dipeptide levels (carnosine and anserine; sham: 11.97 ± 1.5 vs TAC: 10.13 ± 1.4nmol/mg tissue, p < 0.05) were decreased in the gastrocnemius muscle of TAC mice. Depletion of histidyl dipeptides diminished the aldehyde removal capacity of the atrophic gastrocnemius muscle. Furthermore, CARNS and TAUT protein expression were decreased in the atrophic gastrocnemius muscle. Our data reveals that reduced expression of ALDH2 and depletion of histidyl dipeptides in the gastrocnemius muscle during heart failure leads to the accumulation of toxic aldehydes and might contribute to muscle wasting.

High-efficiency carbon-coated steel wool filter for controlling cooking-induced oil smoke

Cooking oil smoke (COS) contains many harmful substances, such as particulate matter, formaldehyde, and phenyl esters. Currently, commercial COS treatment equipment is expensive and requires a large space. Furthermore, a large amount of agricultural waste is generated and is mainly burned onsite, producing large amounts of greenhouse gases and air pollutants. This waste could be reused as a precursor for biochar and activated carbon. Therefore, this research used saccharification and catalytic hydrothermal carbonization to process rice straw and produce compact carbon-based filters (steel wool-C) for removing cooking-induced pollutants. Scanning electron microscopy indicated that carbon layers were coated on the steel wool. The Brunauer-Emmett-Teller surface area of the carbon filter was 71.595 m2/g, 43 times larger than that of steel wool. The steel wool filter removed 28.9%–45.4% of submicron aerosol particles. Adding a negative air ionizer (NAI) to the filter system enhanced the particle removal efficiency by 10%–25%. The removal efficiency of total volatile organic compounds was 27.3%–37.1% with the steel wool filter, but 57.2%–74.2% with the carbon-containing steel wool filter, and the NAI improved the removal efficiency by approximately 1%–5%. The aldehyde removal efficiency of the carbon filter with NAI was 59.0%–72.0%. Conclusively, the compact steel wool-C and NAI device could be promising COS treatment equipment for households and small eateries.

A perspective on recent findings and future strategies for reactive aldehyde removal in spinal cord injury.

A perspective on recent findings and future strategies for reactive aldehyde removal in spinal cord injury.

Characterization, expression, and function analysis of AKR1A1 gene from yellow catfish (Tachysurus fulvidraco).

Aldehyde reductase (AKR1A1) is a carbonyl detoxification protein in toxic aldehyde removal. In the present study, the full-length cDNA of yellow catfish AKR1A1 (TfAKR1A1) was cloned. As expected, yellow catfish AKR1A1 showed similarities with that of other species. Subsequently, prokaryotic expression vector was constructed and recombinant TfAKR1A1 (rTfAKR1A1) was successfully induced and purified. rTfAKR1A1 exhibited reductive activity to many aldehydes and ketones. To determine whether TfAKR1A1 could confer stress tolerance in vitro, the viability of control and TfAKR1A1 expression E. coli under abiotic stress was compared by spot assay. Results showed that the recombinant strain had better stress resistance under cadmium, hydrogen peroxide, and DL-glyceraldehyde stress. Then, effects of an intraperitoneal injection of rTfAKR1A1 protein on cadmium-induced oxidative stress were evaluated. Results displayed that TfAKR1A1 and Nrf2 expression levels were significantly decreased, CAT and SOD expression levels were significantly increased, BCL-2 and IL-10 expression levels were significantly increased, and caspase3a, NF-κB, and IL-1β expression levels were significantly decreased in protein-injection group. Furthermore, oxidative stress indexes in livers under different protein injection doses were examined by ELISA. Results showed that CAT, SOD, and GSH-Px activities were upregulated, ROS and T-AOC contents were also improved, while MDA content was significantly decreased both in lower and middle dose injection groups. Finally, liver pathological section analysis was performed. Results displayed that liver injury degree in protein-injected groups was lower than that of PBS group under cadmium stress. These results suggested that TfAKR1A1 played important roles in response to cadmium stress in yellow catfish.

Iron foam coupled hydrolysis acidification for trichloroacetaldehyde treatment: Strengthening characteristics and mechanism

This research studied transformative characteristics and enhanced mechanism of trichloroacetaldehyde (TCAL), one of chlorinated acetaldehydes (CAAs), by coupled-type iron foam enhanced hydrolysis acidification (HA) reactor. Main results were given that better dechlorination and aldehyde removal were achieved at this process than coupled-type iron foam enhanced HA, alone iron foam and HA reactor. The reasons were due to better strengthening effects of iron foam and HA, iron foam reduced TCAL toxicity to microbes caused an improvement of microbial activity, therefore, volatile fatty acids (VFAs) content and acetate acid (Ac) ratio were increased compared with HA. Moreover, it promoted the enrichment of Actinobacteriota and Firmicutes, and more extracellular polymeric substance (EPS) and enzymes enhanced dechlorination and aldehyde removal. Certainly, microbes reduced iron foam passivation and facilitated its oxidation further improved the strengthening effect.

Intracellular protein delivery using QRPL – A vacuolar targeting signal on carboxypeptidase Y

The signal peptide sequence is known to increase transport efficiency to organelles in eukaryotic cells. In this study, we focus on the signal peptide of the vacuolar protein for vacuolar targeting. The signal peptide sequence QRPL of carboxypeptidase Y (CPY) was inserted inside the interest protein that does not locate in the vacuole for vacuolar targeting. We constructed recombinant strains MBTL-Q-DJ1 and MBTL-Q-DJ2 containing QRPL and green florescent protein (GFP) or aldehyde dehydrogenase 6 (ALD6), respectively. The protein location was then confirmed by confocal microscopy. Fascinatingly, the green fluorescent protein that contains QRPL inside the sequence could be expressed faster than its natural form (within 1 h after induction). Also, the aldehyde removal activity of ALD6 protein in the recombinant yeast was then analyzed by measuring the luminescent intensity in Vibrio fischeri. We confirmed that MBTL-Q-DJ2 containing ALD6 protein has the aldehydes-reducing ability, and in particular, the highest efficiency showed at 500 μg/μL of vacuolar enzyme. In summary, the signal peptide QRPL could be used not only to transport proteins accurately to vacuole but also to improve the protein activity and shorten the induction time.

Can PDMS membranes separate aldehydes and alkenes at high temperatures?

The hydroformylation reaction, the reaction of alkenes and syngas to aldehydes, is one of the most energy-intensive processes in today's chemical industry. In order to intensify hydroformylation, a novel membrane reactor concept was recently introduced, which combines the catalytic reaction with in-situ aldehyde removal through a poly(dimethylsiloxane) (PDMS) membrane. The selective aldehyde removal significantly improves downstream processing during the reaction and prevents unwanted side reactions, which can otherwise lead to catalyst deactivation. PDMS was chosen as the membrane material because of its high hydrocarbon permeabilities at ambient temperatures, as well as high thermal and chemical stability. However, aldehyde permeabilities through PDMS at reaction-relevant temperatures have not been documented, which lacks sufficient information for process simulations and process optimizations for hydroformylation membrane reactors. This work presents permeation properties of the hydrocarbons C2H4, C3H6, C4H8, C3H6O, C4H8O, C5H10O, and N2 as reference gas. Pure- and mixed-gas alkene and N2 permeabilities were measured within the temperature range of 20∘C to 120∘C in a gas-permeation set-up. In addition, a novel vapor-permeation set-up allows to conduct permeation experiments below atmospheric pressures. With this set-up, aldehyde transport properties at temperatures up to 75∘C could be measured. Subsequently, the activation energies of permeation were used to extrapolate the aldehyde permeabilities to higher temperatures with an Arrhenius relation, which enabled the calculation of ideal aldehyde/alkene selectivities for a temperature range up to 120∘C. These selectivities decreased with increasing temperatures, but even at 120∘C, PDMS was aldehyde selective with selectivities ≥ 4.8. Furthermore, PDMS showed no signs of chemical or thermal degradation within alkene or aldehyde experiments.

Adsorptive removal of acetaldehyde from water using strong anionic resins pretreated with bisulfite: An efficient method for spent process water recycling in petrochemical industry

Dynamic adsorption of acetaldehyde from water on strong anionic resin of AMBERLITE IRA 402-OH, modified with bisulfite treatment, was investigated. Effects of three fundamental parameters including initial feed concentration, feed flowrate and active length of the bed on the adsorption were studied with the help of the breakthrough curve analysis. Morphology and functionality of the resin surface in different steps of the process were investigated using scanning electron microscopy and Furrier transform infrared spectroscopy, respectively. SEM analysis disclosed morphological changes in the resin surface as a result of the aldehyde adsorption. Some differences in the characteristic patterns of CH bonds as a result of aldehyde adsorption were also approved by the FTIR analysis. Aldehyde removal and bed adsorption capacity were calculated at different operating conditions. The experimental breakthrough data was satisfactorily correlated with the Thomas model. The maximum bed adsorption capacity was obtained as 11.14 (mg/g), in good agreement with the experimentally- measured bed capacity, 12.61(mg/g). Regeneration experiments demonstrated negligible capacity loss (less than 4%) of the resin bed after six successive adsorption/regeneration cycles. Results indicated that AMBERLITE IRA 402-OH with the maximum acetaldehyde removal of 86% is a potential adsorbent for the recovery of low aldehyde-contaminated spent process water.

Applying Le Chatelier's Principle for a Highly Efficient Catalytic Transfer Hydrogenation with Ethanol as the Hydrogen Source

AbstractWhile isopropanol or formic acid derivatives are mainly applied as hydrogen sources in catalytic transfer hydrogenation reactions, there are only a few reports on the use of primary alcohols. In the present communication we report that ecologically benign and cheap ethanol can be applied with a ruthenium(II) that is completely stable against moisture and oxygen. Catalytic transfer hydrogenation is an equilibrium reaction. Therefore, a rapid removal of acetic aldehyde being formed as the product of ethanol oxidation is the key for high conversions. The reaction shows a broad substrate scope and allows the hydrogenation of ketones, aldehydes and imines.

Deficiency of aldose reductase exacerbates early pressure overload-induced cardiac dysfunction and autophagy in mice

Pathological cardiac hypertrophy is associated with the accumulation of lipid peroxidation-derived aldehydes such as 4-hydroxy-trans-2-nonenal (HNE) and acrolein in the heart. These aldehydes are metabolized via several pathways, of which aldose reductase (AR) represents a broad-specificity route for their elimination. We tested the hypothesis that by preventing aldehyde removal, AR deficiency accentuates the pathological effects of transverse aortic constriction (TAC). We found that the levels of AR in the heart were increased in mice subjected to TAC for 2 weeks. In comparison with wild-type (WT), AR-null mice showed lower ejection fraction, which was exacerbated 2 weeks after TAC. Levels of atrial natriuretic peptide and myosin heavy chain were higher in AR-null than in WT TAC hearts. Deficiency of AR decreased urinary levels of the acrolein metabolite, 3-hydroxypropylmercapturic acid. Deletion of AR did not affect the levels of the other aldehyde-metabolizing enzyme - aldehyde dehydrogenase 2 in the heart, or its urinary product - (N-Acetyl-S-(2-carboxyethyl)-l-cystiene). AR-null hearts subjected to TAC showed increased accumulation of HNE- and acrolein-modified proteins, as well as increased AMPK phosphorylation and autophagy. Superfusion with HNE led to a greater increase in p62, LC3II formation, and GFP-LC3-II punctae formation in AR-null than WT cardiac myocytes. Pharmacological inactivation of JNK decreased HNE-induced autophagy in AR-null cardiac myocytes. Collectively, these results suggest that during hypertrophy the accumulation of lipid peroxidation derived aldehydes promotes pathological remodeling via excessive autophagy, and that metabolic detoxification of these aldehydes by AR may be essential for maintaining cardiac function during early stages of pressure overload.

Recycling Monoethylene Glycol (MEG) from the Recirculating Waste of an Ethylene Oxide Unit

AbstractIn the ethylene glycol generation unit of petrochemical plants, first a reaction of ethylene oxide takes place which is then followed by other side reactions. These reactions include water absorption with ethylene oxide, which leads to the generation of formaldehyde and acetaldehyde. Over the lifetime of the alpha-alumina-based silver catalyst there is an increase in side reactions, increasing the amount of the formaldehyde and acetaldehyde generated by the ethylene oxide reactor which leads to reduced MEG product purity. Given the need of a petrochemical complex to further strip the aldehyde (formaldehyde and acetaldehyde) to increase the quality of the MEG and increase the lifetime of the alpha-alumina-based silver catalyst, resin beds are designed and their surface absorption capacity is investigated to optimize aldehyde (formaldehyde and acetaldehyde) removal in the recirculating water flow of the ethylene oxide unit. Experiments show that the ion exchange system based on strong anionic resin pre-treated with a sodium bisulfite solution can reduce the aldehyde level from about 300ppm to less than 5ppm. After the resin is saturated with aldehyde, the resin can be recycled using the sodium bisulfite solution which is a cheap chemical substance.

Removal of Low-Molecular Weight Aldehydes by Selected Houseplants under Different Light Intensities and CO2 Concentrations

The removal of five low-molecular weight aldehydes by two houseplants (Schefflera octophylla (Lour.) Harms and Chamaedorea elegans) were investigated in a laboratory simulation environment with short-term exposure to different low light intensities and CO2 concentrations. Under normal circumstances, the C1–C5 aldehyde removal rates of Schefflera octophylla (Lour.) Harms and Chamaedorea elegans (Lour.) Harms ranged from 0.311 μmol/m2/h for valeraldehyde to 0.677 μmol/m2/h for formaldehyde, and 0.526 μmol/m2/h for propionaldehyde to 1.440 μmol/m2/h for formaldehyde, respectively. However, when the light intensities varied from 0 to 600 lx, a significant correlation between the aldehyde removal rate and the light intensity was found. Moreover, the CO2 experiments showed that the total aldehyde removal rates of Schefflera octophylla (Lour.) Harms and Chamaedorea elegans (Lour.) Harms decreased 32.0% and 43.2%, respectively, with increasing CO2 concentrations from 350 ppmv to 1400 ppmv. This might be explained by the fact that the excessive CO2 concentration decreased the stomatal conductance which limited the carbonyl uptake from the stomata.

Aging Performance and Structural Study on Bio-Asphalt

This paper explains and demonstrates the aging performance and structure of bio-asphalt with analytical results from hot stage microscopy, infrared spectroscopic and nuclear magnetic resonance spectra. The experimental results showed that the aging of bio-asphalt is mainly caused by a large amount of coke substance generated during the process, and the addition of BHT can improve the aging resistance of bio-asphalt to some extent. Catalytic hydrogenation facilitate the removal of aldehyde, ketone and carbon-carbon double bond so as to strengthen the aging resistance of bio-asphalt, nuclear magnetic analysis further confirms the results from IR .

Electrocoagulation for the removal of phenol and aldehyde contaminants from resin effluent

This paper is a report on a study which aimed to investigate the effect of different current density, pH, temperature, and cathode-anode combination on the removal of phenol and aldehyde in two samples of actual resin effluent through the process of electrocoagulation using solar energy. Current density 60 A/m(2) and pH 6 proved to be the best levels for both contaminants. As for the effect of temperature, although the highest degree of phenol and aldehyde removal was achieved at 15 °C, 25 °C was taken to be the optimum temperature for economic reasons. The Fe-Fe combination of electrodes was found to be the best as it led to nearly 93% of phenol removal and approximately 95% of aldehyde removal. Also, the effect of electrode combination on energy consumption was studied. It was observed that the Fe-Fe combination consumed the least amount of energy (0.7-4.3 kWh/m(3) of wastewater in the case of phenol and 0.8-4 kWh/m(3) of wastewater in the case aldehyde). Moreover, the Fe-Fe combination brought about the best results in terms of chemical oxygen demand removal: 93% in both cases. Finally, an economic analysis was performed for the electrocoagulation process.

Dietary Carnosine Prevents Early Atherosclerotic Lesion Formation in Apolipoprotein E–Null Mice

Atherosclerotic lesions are associated with the accumulation of reactive aldehydes derived from oxidized lipids. Although inhibition of aldehyde metabolism has been shown to exacerbate atherosclerosis and enhance the accumulation of aldehyde-modified proteins in atherosclerotic plaques, no therapeutic interventions have been devised to prevent aldehyde accumulation in atherosclerotic lesions. We examined the efficacy of carnosine, a naturally occurring β-alanyl-histidine dipeptide, in preventing aldehyde toxicity and atherogenesis in apolipoprotein E-null mice. In vitro, carnosine reacted rapidly with lipid peroxidation-derived unsaturated aldehydes. Gas chromatography mass-spectrometry analysis showed that carnosine inhibits the formation of free aldehydes 4-hydroxynonenal and malonaldialdehyde in Cu(2+)-oxidized low-density lipoprotein. Preloading bone marrow-derived macrophages with cell-permeable carnosine analogs reduced 4-hydroxynonenal-induced apoptosis. Oral supplementation with octyl-D-carnosine decreased atherosclerotic lesion formation in aortic valves of apolipoprotein E-null mice and attenuated the accumulation of protein-acrolein, protein-4-hydroxyhexenal, and protein-4-hydroxynonenal adducts in atherosclerotic lesions, whereas urinary excretion of aldehydes as carnosine conjugates was increased. The results of this study suggest that carnosine inhibits atherogenesis by facilitating aldehyde removal from atherosclerotic lesions. Endogenous levels of carnosine may be important determinants of atherosclerotic lesion formation, and treatment with carnosine or related peptides could be a useful therapy for the prevention or the treatment of atherosclerosis.

Aminosilica Materials as Adsorbents for the Selective Removal of Aldehydes and Ketones from Simulated Bio‐Oil

The fast pyrolysis of biomass is a potential route to the production of liquid biorenewable fuel sources. However, degradation of the bio-oil mixtures due to reaction of oxygenates, such as aldehydes and ketones, reduces the stability of the liquids and can impact long-term storage and shipping. Herein, solid aminosilica adsorbents are described for the selective adsorptive removal of reactive aldehyde and ketone species. Three aminosilica adsorbents are prepared through the reaction of amine-containing silanes with pore-expanded mesoporous silica. A fourth aminosilica adsorbent is prepared through the ring-opening polymerization of aziridine from pore-expanded mesoporous silica. Adsorption experiments with a representative mixture of bio-oil model compounds are presented using each adsorbent at room temperature and 45 °C. The adsorbent comprising only primary amines adsorbs the largest amount of aldehydes and ketones. The overall reactivity of this adsorbent increases with increasing temperature. Additional aldehyde screening experiments show that the reactivity of aldehydes with aminosilicas varies depending on their chemical functionality. Initial attempts to regenerate an aminosilica adsorbent by acid hydrolysis show that they can be at least partially regenerated for further use.

Aldose Reductase Protects Against Early Atherosclerotic Lesion Formation in Apolipoprotein E-Null Mice

Atherosclerotic lesion formation is associated with the accumulation of oxidized lipids. Products of lipid oxidation, particularly aldehydes, stimulate cytokine production and enhance monocyte adhesion; however, their contribution to atherosclerotic lesion formation remains unclear. To test the hypothesis that inhibition of aldehyde removal by aldose reductase (AR), which metabolizes both free and phospholipid aldehydes, exacerbates atherosclerotic lesion formation. In atherosclerotic lesions of apolipoprotein (apo)E-null mice, AR protein was located in macrophage-rich regions and its abundance increased with lesion progression. Treatment of apoE-null mice with AR inhibitors sorbinil or tolrestat increased early lesion formation but did not affect the formation of advanced lesions. Early lesions of AR(-/-)/apoE(-/-) mice maintained on high-fat diet were significantly larger when compared with age-matched AR(+/+)/apoE(-/-) mice. The increase in lesion area attributable to deletion of the AR gene was seen in both male and female mice. Pharmacological inhibition or genetic ablation of AR also increased the lesion formation in male mice made diabetic by streptozotocin treatment. Lesions in AR(-/-)/apoE(-/-) mice exhibited increased collagen and macrophage content and a decrease in smooth muscle cells. AR(-/-)/apoE(-/-) mice displayed a greater accumulation of the AR substrate 4-hydroxy trans-2-nonenal (HNE) in the plasma and protein-HNE adducts in arterial lesions than AR(+/+)/apoE(-/-) mice. These observations indicate that AR is upregulated in atherosclerotic lesions and it protects against early stages of atherogenesis by removing toxic aldehydes generated in oxidized lipids.

Analysis of aldehyde reductases from Gluconobacter oxydans 621H

Two cytosolic nicotinamide adenine dinucleotide phosphate-dependent aldehyde reductases, Gox1899 and Gox2253, from Gluconobacter oxydans 621H were overproduced and purified from Escherichia coli. The purified proteins exhibited subunit masses of 26.4 (Gox1899) and 36.7 kDa (Gox2253). Both proteins formed homo-octamers exhibiting native masses of 210 and 280 kDa, respectively. The substrate spectra, optimal reaction conditions, and kinetic constants were determined for Gox1899 and Gox2253. Both enzymes efficiently catalyzed the reduction of medium/long-chain aldehydes. However, Gox1899 had a wider substrate spectrum and was more catalytically efficient. The best activity with Gox1899 was found for aliphatic aldehydes of C6-C10. In contrast, Gox2253 had a limited substrate spectrum and reduced octanal, nonanal, and decanal. Both enzymes were unable to oxidize primary alcohols. Aldehyde removal may be of particular importance for Gluconobacter because the membrane-bound alcohol dehydrogenase rapidly oxidizes short to long-chain alcohols, and large quantities of aldehydes could enter the cell, making detoxification necessary.

Comparison of chemical wet scrubbers and biofiltration for control of volatile organic compounds using GC/MS techniques and kinetic analysis

AbstractIncreasing public concerns and EPA air regulations in non‐attainment zones necessitate the remediation of volatile organic compounds (VOCs) generated in the poultry‐rendering industry. Wet scrubbers using chlorine dioxide (ClO2) have low overall removal efficiencies due to lack of reactivity with aldehydes. Contrary to wet scrubbers, a biofilter system successfully treated the aldehyde fraction, based on GC/MS analysis of inlet and outlet streams. Total VOC removal efficiencies ranged from 40 to 100% for the biofilter, kinetic analysis indicated that the overall removal capacity approached 25 g m−3 h−1, and aldehyde removal efficiency was significantly higher compared with chemical wet scrubbers. Process temperatures monitored in critical unit operations upstream from the biofilter varied significantly during operation, rising as much as 30 °C within a few minutes. However, the outlet air temperature of a high intensity scrubber remained relatively constant at 40 °C, although the inlet air temperature fluctuated from 50 to 65 °C during monitoring. These data suggest a hybrid process combining a wet scrubber and biofilter in series could be used to improve overall VOC removal efficiencies and process stability. Copyright © 2005 Society of Chemical Industry

Effect of pH and Temperature on the Kinetics of Odor Oxidation Using Chlorine Dioxide

Increasing public concerns over odors and air regulations in nonattainment zones necessitate the remediation of a wide range of volatile organic compounds (VOCs) generated in the poultry-rendering industry. Currently, wet scrubbers using oxidizing chemicals such as chlorine dioxide (ClO2) are utilized to treat VOCs. However, little information is available on the kinetics of ClO2 reaction with rendering air pollutants, limiting wet scrubber design and optimization. Kinetic analysis indicated that ClO2 does not react with hexanal and 2-methylbutanal regardless of pH and temperature and implied that alde-hyde removal occurs primarily via mass transfer. Contrary to the aldehydes, ethanethiol or ethyl mercaptan (a model compound for methanethiol or methyl mercaptan) and dimethyl disulfide (DMDS) rapidly reacted with ClO2. The overall reaction was found to be second and third order for ethanethiol and DMDS, respectively. Moreover, an increase in pH from 3.6 to 5.1 exponentially increased the reaction rate of ethanethiol (e.g., k 2 = 25– 4200 L/mol/sec from pH 3.6 to 5.1) and significantly increased the reaction rate of DMDS if increased to pH 9 (k 3 = 1.4 × 106 L2/mol2/sec). Thus, a small increase in pH could significantly improve wet scrubber operations for removal of odor-causing compounds. However, an increase in pH did not improve aldehyde removal. The results explain why aldehyde removal efficiencies are much lower than methanethiol and DMDS in wet scrub-bers using ClO2.