Alaska Margin Research Articles

Testing the use of quartz ‘micro-hole’ photon-simulated luminescence for dating sediments from the central Lomonosov Ridge, Arctic Ocean

In the Arctic Ocean, direct dating methods are needed as an alternative to the radiocarbon (14C) method and to various indirect approaches for a longer stratigraphy. In past attempts to develop a luminescence sediment dating, the use of fine-silt (4–11 μm) mixture of quartz and feldspar grains from core tops has often produced large age overestimates by several ka. A recent application of micro-focused laser (‘micro-hole’) photon-stimulated luminescence (PSL) to medium-silt to fine-sand quartz grains (11–105 μm) from the core tops at the Alaska margin has been usefully accurate. To extend this approach to the central Arctic Ocean and to a larger grain size range, we applied micro-hole PSL dating to >11 μm quartz grains from core tops (0.5–2 cm horizon) from two sites on the central Lomonosov Ridge. We obtain a burial age estimate of ca. 2 ka for 11–62 μm grains at a multicore site 18 MC within a perched intra-ridge basin, in accord with 14C ages obtained on foraminifers. At nearby site 19 MC on the erosive ridge top, the micro-hole PSL dating of >90 μm quartz grains produces a burial age estimate of ∼ca. 25 ka, in accord with a foraminiferal 14C age of ca. 26 ka. However, the 11–90 μm grains from the same sample produce a much younger burial age estimate of ca. 9 ka. Thus, these two size fractions of quartz grains record different burial times and different deposition agents (icebergs vs. sea ice), providing insight into past sedimentary processes. Overall, our results confirm an earlier conclusion from micro-hole PSL dating study at the Alaska margin that medium to coarse silt fractions of quartz grains (11–90 μm or at least 62 μm) is the preferred material for direct dating of the last daylight exposure of detrital sediment in the Arctic Ocean.

Subducting plate geology in three great earthquake ruptures of the western Alaska margin, Kodiak to Unimak

Three destructive earthquakes along the Alaska subduction zone sourced transoceanic tsunamis during the past 70 years. Since it is reasoned that past rupture areas might again source tsunamis in the future, we studied potential asperities and barriers in the subduction zone by examining Quaternary Gulf of Alaska plate history, geophysical data, and morphology. We relate the aftershock areas to subducting lower plate relief and dissimilar materials in the seismogenic zone in the 1964 Kodiak and adjacent 1938 Semidi Islands earthquake segments. In the 1946 Unimak earthquake segment, the exposed lower plate seafloor lacks major relief that might organize great earthquake rupture. However, the upper plate contains a deep transverse-trending basin and basement ridges associated with the Eocene continental Alaska convergent margin transition to the Aleutian island arc. These upper plate features are sufficiently large to have affected rupture propagation. In addition, massive slope failure in the Unimak area may explain the local 42-m-high 1946 tsunami runup. Although Quaternary geologic and tectonic processes included accretion to form a frontal prism, the study of seismic images, samples, and continental slope physiography shows a previous history of tectonic erosion. Implied asperities and barriers in the seismogenic zone could organize future great earthquake rupture.

Subduction of spreading ridges as a factor in the evolution of continental margins

The subduction of spreading ridges creates a special geodynamic setting distinguished by the interference of convergent and divergent boundaries between lithospheric plates and their long-term interaction accompanied by the formation of characteristic geological complexes and structures. The available data on subduction of the contemporary Chile Ridge make it possible to reconstruct such settings in the geological past. The subduction of the spreading ridge leads to uplift of the continental margin, cut off the accretionary wedge by means of tectonic erosion, emplacement of a fold-thrust structure and longitudinal strike-slip faults, and creates settings favorable for obduction of the young oceanic lithosphere. A lithospheric window expressed in geological and geophysical features opens beneath the continental margin at the continuation of the ridge axis. The subduction-related volcanic activity ceases above this window, giving way to specific proximal magmatism close to the boundary with the ocean and distal magmatism at a distance from this boundary. The proximal bimodal magmatism was related to the sources of tholeiitic basalts characteristic of the ridge involved in subduction and to the partial melting of its oceanic crust and sediments. The distal basaltic magmatism is a product of melting of the fertile oceanic asthenosphere ascending through the lithospheric window with subsequent transformation of magma in the mantle wedge and the continental crust. The use of the Chilean tectonotype for paleoreconstructions is limited by the diverse settings of ridge subduction. The Paleogene magmatism at the Pacific margin of Alaska, where the kinematics of subduction was close to the Chilean subduction, is similar to the proximal igneous rocks of Chile in composition and zoning, retaining some geological differences. Another aspect of the paleoreconstruction is discussed on the basis of Jurassic and Cretaceous granitoids of the Ekonai Terrane of the Anadyr-Koryak System and terranes of southern Alaska. These localities are known for a special, accretionary type of granitoids in the forearc region related to anatectic magma formation without participation of the plunging ridge. Proceeding from comparison with the Chilean tectonotype, the criteria for the identification of granitoids varying in their origin are considered. The effect of subducting ridges on continental margins changed over geologic time and was subject to the rhythm of supercontinental cycles.

Crustal structure of the Yakutat terrane and the evolution of subduction and collision in southern Alaska

We present a two‐dimensional velocity model to constrain crustal thickness and composition of the Yakutat terrane in the northern Gulf of Alaska. The model was constructed using seismic reflection and refraction data along a ∼455 km onshore‐offshore profile. Our model shows that the crystalline crust composing the Yakutat terrane is wedge‐shaped, with crustal thickness increasing west to east from ∼15 km to ∼30 km. Crustal velocity and structure are continuous across the terrane, with lower crustal velocities >7 km/s, suggesting that the Yakutat terrane is an oceanic plateau across its entire offshore extent rather than a composite oceanic‐continental terrane as previously proposed. The thickest Yakutat crust is entering the adjacent St. Elias orogen where elevated exhumation rates and concentrated seismicity in this vicinity are likely influenced by incipient Yakutat‐North America collision. Our model includes a ∼8 km thick low‐velocity crustal cap extending across the eastern portion of the profile where shallow basement is imaged on marine seismic reflection data. We interpret this cap as a lithified, metamorphosed remnant accretionary prism, providing evidence of a previous attempt at Yakutat subduction along its eastern margin prior to current emplacement at the southern Alaska margin.

The petrology and geochemistry of a metabasite belt along the southern margin of Alaska

A 600km long metabasite belt is exposed at the southern border of the Chugach terrane in southern Alaska, south of the Eocene Chugach Metamorphic Complex (CMC). In this contribution, we present petrologic and geochemical results for parts of this metabasite belt. The metabasites studied are amphibolite grade and their PT conditions are evaluated with hornblende–plagioclase thermometry and the average PT method. From west to east the peak metamorphic conditions calculated are: about 730–793°C for pressures between 5 and 15kbar in the westernmost part, about 740–760°C and 5kbar in the middle locality and about 640–675°C and 8kbar in the easternmost locality. These results are comparable with the metamorphic conditions obtained on metapelite of the CMC for the westernmost and easternmost localities. In contrast, in the central part of the CMC, the metabasites experienced probably lower pressures than the metapelites to the north. Rare earth and trace element patterns of the metabasite belt are comparable with typical altered basalt patterns and reveal MORB and arc-tholeiitic geochemical characteristics. The presence of Ba and U anomalies are interpreted as a result of alteration prior to subduction, the Pb anomaly as a result of an intra-oceanic island arc signature and the Sr anomaly as a result of the interaction of sediments with the metabasites during subduction. We suggest that the association of MORB and arc tholeiitic rocks in the metabasite belt is likely derived from an intra-oceanic island arc which accreted to the Alaskan margin.

The deglacial transition on the southeastern Alaska Margin: Meltwater input, sea level rise, marine productivity, and sedimentary anoxia

Oxygen isotope data from planktonic and benthic foraminifera, on a high‐resolution age model (44 14C dates spanning 17,400 years), document deglacial environmental change on the southeast Alaska margin (59°33.32′N, 144°9.21′W, 682 m water depth). Surface freshening (i.e., δ18O reduction of 0.8‰) began at 16,650 ± 170 cal years B.P. during an interval of ice proximal sedimentation, likely due to freshwater input from melting glaciers. A sharp transition to laminated hemipelagic sediments constrains retreat of regional outlet glaciers onto land circa 14,790 ± 380 cal years B.P. Abrupt warming and/or freshening of the surface ocean (i.e., additional δ18O reduction of 0.9‰) coincides with the Bølling Interstade of northern Europe and Greenland. Cooling and/or higher salinities returned during the Allerød interval, coincident with the Antarctic Cold Reversal, and continue until 11,740 ± 200 cal years B.P., when onset of warming coincides with the end of the Younger Dryas. An abrupt 1‰ reduction in benthic δ18O at 14,250 ± 290 cal years B.P. likely reflects a decrease in bottom water salinity driven by deep mixing of glacial meltwater, a regional megaflood event, or brine formation associated with sea ice. Two laminated opal‐rich intervals record discrete episodes of high productivity during the last deglaciation. These events, precisely dated here at 14,790 ± 380 to 12,990 ± 190 cal years B.P. and 11,160 ± 130 to 10,750 ± 220 cal years B.P., likely correlate to similar features observed elsewhere on the margins of the North Pacific and are coeval with episodes of rapid sea level rise. Remobilization of iron from newly inundated continental shelves may have helped to fuel these episodes of elevated primary productivity and sedimentary anoxia.

Surmounting luminescence age overestimation in Alaska-margin Arctic Ocean sediments by use of ‘micro-hole’ quartz dating

Because of several difficulties with the application of radiocarbon ( 14C) dating to Arctic Ocean sediments, numeric dating techniques are needed that can complement, supplant and reach beyond the 14C method. However, large age overestimates (often >7 kyr) for near-sediment-water-interface horizons from Arctic Ocean cores have been almost universal when luminescence dating has been applied to multigrain aliquots of fine silt (4–11 μm) quartz and feldspar grains. Here micro-hole quartz-grain photon-stimulated-luminescence (PSL) dating is applied to the 0.5–2.0 cm horizons of multicores from high-sedimentation-rate sites spanning depths from 87 m to 1140 m at the Alaska margin of the Arctic Ocean. Expected near zero ages (0–200 a) result when grains larger than ∼11 μm are used, demonstrating that fine-silt age overestimations here and perhaps elsewhere in the Arctic Ocean are a function of grain and aliquot size. At the 87 m site, the micro-hole PSL approach revealed no significant gradient in age estimates over the 1–26 cm horizon range, implying that bioturbation reached to at least 26 cm. Micro-hole PSL dating of 25–62 μm quartz grains from trans-ocean sea-ice sediment also produced expected near zero ages, in contrast to earlier reported long-bleach multigrain PSL results from 4–11 μm fractions of the same samples. The micro-hole PSL approach thus surmounts the age overestimation problem associated with the use of multigrain silt fractions, and overcomes limitations of the 14C method in this region. Finally, results unexpectedly suggest the potential of micro-hole quartz PSL for use in provenance studies of Arctic Ocean sea-ice sediment.

Formation of a metamorphic complex along an obliquely convergent margin: Structural and thermochronological evolution of the Chugach Metamorphic Complex, southern Alaska

This study documents the structural and metamorphic evolution of middle to lower crust along an oblique convergent curved continental margin during a time span of ∼60 Myr. Our study documents the importance of variable obliquity during convergence which led to the development of overprinting fabrics and distinct exhumation histories along strike of the margin. We present structural analyses,40Ar/39Ar, Rb/Sr, and zircon fission track ages from middle to lower crust exposed along the southern Alaskan margin in the Chugach Metamorphic Complex. Together with the metamorphic history and additional geochronology from the literature we derive the following tectonic evolution for this area: accretion of sediments during dextrally oblique convergence led to strain‐partitioned D1structures and greenschist‐facies metamorphism prior to circa 55 Ma. At ∼55–51 Ma, a margin‐parallel stretching phase with vertical thinning (D2) affected the margin and led to andalusite‐sillimanite grade metamorphism and the onset of partial melting. A switch back to dextral transpression (D3) shortly after D2led to rapid cooling of the western and central parts of the complex associated with exhumation of parts of the core of the complex until circa 46 Ma. The southeastern part of the complex cooled and exhumed regularly and slowly until circa 5 Ma due to its highly oblique orientation relative to the convergence direction. An increase in cooling and exhumation occurred after circa 5 Ma in the entire southeastern part of the complex, associated with the Neogene collision of the Yakutat terrane.

Upper plate proxies for flat-slab subduction processes in southern Alaska

The timing of initiation of flat-slab subduction beneath southern Alaska and the upper plate record of this process are not well understood. We explore the record of flat-slab subduction in southern Alaska by integrating stratigraphic, provenance, geochronologic, and thermochronologic data from the region directly above and around the perimeter of ongoing flat-slab subduction. These datasets document a change from regional Paleocene–Oligocene subduction-related magmatism and basin development to an absence of magmatism and initiation of rock exhumation that continues to today. We infer that initiation of flat-slab subduction prompted crustal shortening, exhumation, inversion of sedimentary basins, and cessation of magmatism above and around the area of ongoing flat-slab subduction. Surface uplift and erosion above the flat slab resulted in deposition of thick, clastic wedges in sedimentary basins located along the western and northern perimeters of the flat-slab region. Along the eastern perimeter, northwestward-propagating Oligocene–Quaternary slab-edge volcanism and transtensional basin development along dextral strike-slip faults record progressive northwestward insertion of a shallow slab against the curved continental margin of eastern Alaska. Collectively, these geologic data indicate that flat-slab subduction was shaping southern Alaska by late Eocene–early Oligocene time, much earlier than previous models infer. Upper plate processes related to subduction of a flat slab in Alaska are similar to those documented in other modern flat-slab regions. These processes include: 1) shortening and exhumation of the upper plate several hundred kilometers inboard from the plate margin, 2) cessation of subduction-related magmatism within ten million years of the onset of shallow subduction, 3) shoaling or inversion of sedimentary basins above the flat-slab region, 4) deformation and/or erosion of the accretionary prism during flat-slab subduction, and 5) in some settings, reestablishment of sedimentation in the accretionary prism after the shallow slab has migrated laterally. Unlike other flat-slab margins, strike-slip-related volcanism and basin development characterizes one edge of the flat-slab region in Alaska, a consequence of oblique insertion of the flat slab into the corner of a curved continental margin.

The role of an Arctic ice shelf in the climate of the MIS 6 glacial maximum (140 ka)

During the last decade, Arctic icebreaker and nuclear submarine expeditions have revealed large-scale Pleistocene glacial erosion on the Lomonosov Ridge, Chukchi Borderland and along the Northern Alaskan margin indicating that the glacial Arctic Ocean hosted large Antarctic-style ice shelves. Dating of sediment cores indicates that the most extensive and deepest ice grounding occurred during Marine Isotope Stage (MIS) 6. The precise extents of Pleistocene ice shelves in the Arctic Ocean are unknown but seem comparable to present existing Antarctic ice shelves. How would an Antarctic-style ice shelf in the MIS 6 Arctic Ocean influence the Northern Hemisphere climate? Could it have impacted on the surface mass balance (SMB) of the MIS 6 Eurasian ice sheet and contributed to its large southward extent? We use an Atmospheric General Circulation Model (AGCM) to investigate the climatic impacts of both a limited MIS 6 ice shelf covering portions of the Canada Basin and a fully ice shelf covered Arctic Ocean. The AGCM results show that both ice shelves cause a temperature cooling of about 3 °C over the Arctic Ocean mainly due to the combined effect of ice elevation and isolation from the underlying ocean heat fluxes stopping the snow cover from melting during summer. The calculated SMB of the ice shelves are positive. The ice front horizontal velocity of the Canada Basin ice shelf is estimated to ≈ 1 km yr −1 which is comparable to the recent measurements of the Ross ice shelf, Antarctica. The existence of a large continuous ice shelf covering the entire Arctic Ocean would imply a mean annual velocity of icebergs of ≈12 km yr −1 through the Fram Strait. Our modeling results show that both ice shelf configurations could be viable under the MIS 6 climatic conditions. However, the cooling caused by these ice shelves only affects the Arctic margins of the continental ice sheets and is not strong enough to significantly influence the surface mass balance of the entire MIS 6 Eurasian ice sheet.

Iceberg discharge to the Chukchi shelf during the Younger Dryas

The extent of glaciation in northwestern Alaska, the source of sediment supply to the Chukchi shelf and slope, and the movement of sea ice and icebergs across the shelf during the last glacial maximum (LGM) remain poorly constrained. Here we present geophysical and geological data from the outer Chukchi margin that reveal a regionally extensive, heavily ice-scoured surface ∼ 5–8 m below the modern seafloor. Radiocarbon dating of this discrete event yields age estimates between 10,600 and 11,900 14C yr BP, indicating the discharge event occurred during the Younger Dryas. Based on mineralogy of the ice-rafted debris, the icebergs appear to be sourced from the northwestern Alaskan margin, which places important constraints on the ice extent in northern Alaska during the LGM as well as existing circulation models for the region.

The thermochronological record of tectonic and surface process interaction at the Yakutat-North American collision zone in southeast Alaska

We investigate the material fluxes in space and time as a result of exhumation and erosion processes at the ongoing Yakutat--North American collision in southeast Alaska. Many thermochronologic studies using a variety of sampling strategies are challenged by the widespread ice cover that limit field observations and accessibility. This paper reviews new and published low-temperature thermochronological data from southeast Alaska to give a comprehensive interpretation of the exhumation patterns through time and how they are influenced by surface processes and climate change. We find that the southeastern margin of Alaska was exhumed and eroded long before the late Miocene--Pliocene Yakutat collision, but since the beginning of the subduction of the Yakutat lithosphere in the Oligocene/early Miocene. Today there is a distinct pattern of exhumation in southeast Alaska with a localized very rapid and deep-seated exhumation at the Yakutat plate corner (St. Elias syntaxis), where strike slip motion changes to convergence. Exhumation is also rapid, but less deep along the dextral Fairweather fault, and in the evolving fold and thrust belt. We present a re-interpretation of the exhumation pattern in the fold and thrust belt and suggest that mass transport by exhumation is parallel to the observed active thrust faults and oblique to the suture zone and orogenic strike. The locus of most rapid exhumation migrated from northwest to southeast with Recent exhumation occurring near the St. Elias syntaxis. Exhumation of the Chugach terrane rocks is still active, however to a lesser degree than on the south side of the orogen where precipitation rates are much higher. The Wrangellia terrane to the north has experienced little exhumation and has essentially formed the backstop for terrane accretion in southeast Alaska since the Early Cretaceous. Apatite U-Th/He ages give the first evidence that rocks of the Wrangell Range have only been recently uplifted and eroded as a consequence of the continuing Yakutat collision. In general the thermochronology in southeast Alaska reveals that climate variations across the region as well as changes through time have a limited influence on the pattern of erosion and that the location of deep exhumation is primarily influenced by tectonic processes.

Paleoceanography of the Gulf of Alaska during the past 15,000 years: Results from diatoms, silicoflagellates, and geochemistry

High-resolution records of diatoms, silicoflagellates, and geochemistry covering the past 15,000 years were studied in three cores from the Gulf of Alaska (GOA). Core EW0408-85JC in an oceanic setting on the Kayak Slope displays a paleoceanographic record similar to that at several locations on the California margin during deglaciation. Biologic productivity as reconstructed using geochemical and microfossil proxies increased abruptly during the Bølling–Alleröd (Bø–Al) warm interval (14.7–12.9 cal ka), declined during the Younger Dryas (YD) cold interval (12.9 to 11.7 cal kyr BP), and rose again during the earliest Holocene. At this site, the record after ~ 11 cal kyr BP is dominated by oceanic diatoms and silicoflagellates, with geochemical proxies displaying more subtle variation. Cores EW0408-66JC in the Yakobi Sea Valley near Cross Sound and EW0408-11JC in the Gulf of Esquibel contain an expanded, composite record along the southeast Alaskan margin. Core 66JC contains a detailed record of the Bø–Al and YD. Diatoms and silicoflagellates indicate that coastal upwelling and biosiliceous productivity were strong during the Bø–Al but declined during the YD. Sea ice-related diatoms increased in abundance during the YD, indicating cooler, but less productive waters. The glacial to biogenic marine sediment transition in core 11JC occurs at 1280 cmbsf (centimeters below sea floor), probably representing rising sea level and deglaciation early in the Bø–Al. Freshwater and sea-ice related diatoms are common in the lower part of the core (Bø–Al and YD), but upwelling-related diatoms and silicoflagellates quickly increased in relative abundance up-core, dominating the record of the past 11,000 years. Low oxygen conditions in the bottom water as reconstructed using geochemical proxies (U and Mo concentration) were most intense between ~ 6.5 and 2.8 cal kyr BP, the beginning of which is coincident with increases in abundance of upwelling-related diatoms. The records from these three cores jointly thus made it possible to reconstruct paleoclimatic and paleoceanographic conditions at high northern Pacific latitudes during the last 15 kyr.

The 2005 HOTRAX Expedition to the Arctic Ocean

The Healy–Oden Trans-Arctic Expedition (HOTRAX'05) recovered 29 long piston cores and associated multicores along a transect from the Alaskan margin across the central Arctic Ocean to the northern Svalbard margin. The initial results focus on the age and stratigraphy of these cores using a variety of approaches including radiocarbon, paleomagnetic and other chronostratigraphic methods as well as detailed correlations of proxy records. High sedimentation cores from probable drift deposits are described from the shelf and continental slope north of Alaska. Provenance and sedimentary processes in these deposits include both currents and sea-ice rafting. Much lower sedimentation rates in the central Arctic Ocean show geographic variability consistent with the patterns of expected sediment distribution by ice and, to a smaller extent, subsurface currents. Insights into the Upper Quaternary stratigraphy and depositional history are provided in two papers on a core from the Mendeleev Ridge with sedimentation rates relatively elevated for this region. To compliment the results from the HOTRAX cores, two papers are included dealing with the stratigraphy and sedimentary processes on the Chukchi shelf and a modeling study addressing why the Marine Isotopic Stage 6 (ca. 140 ka) glaciation was substantially more extensive in the Arctic than the Last Glacial Maximum.

Impact of diagenesis on the environmental magnetic record from a Holocene sedimentary sequence from the Chukchi–Alaskan margin, Arctic Ocean

We present a high-resolution Holocene sedimentary record of environmental variability from the eastern Chukchi Sea. An ice-rafted debris bearing silty-clay marks the deglacial to post-glacial Holocene transition at this site and is dated at 9.7 ka. An interval of oscillating magnetic parameters from 9.5 to 8.7 ka coincides with the Holocene Thermal Maximum in the western Arctic, and is manifested at the study area as pulses of fine-grained magnetite input every 180–230 years, possibly from increased river discharge or stronger currents flowing over the core site. The magnetic mineral assemblage is very uniform over the last 8.2 ka and consists of a mixture of magnetite, titanomagnetite, and a magnetic phase that we tentatively identify as the magnetic iron sulfide greigite. The amount of magnetic iron sulfides increases up through the Holocene, a trend that is controlled by the amount of marine organic matter available to fuel bacterial sulfate reduction. The median destructive field of the Natural Remanent Magnetization (MDF NRM) displays centennial to millennial scale cycles with significant variance at periods of 900–1300 and 1700–2700 years, with intervals of high MDF NRM values coinciding with indicators of greater sea ice cover [McKay, J., de Vernal, A., Hillaire-Marcel, C., Not, C., Polyak, L., Darby, D., 2008. Holocene fluctuations in Arctic sea-ice cover: Dinocyst-based reconstructions for the eastern Chukchi Sea. Can. J. Earth Sci. 45, 1399–1415]. The MDF NRM is controlled by the variable abundance of iron sulfides formed during early diagenesis. We interpret intervals of high MDF NRM values as times of stronger water column stratification, during which the pyritization process was interrupted by the lack of marine organic matter and lack of reactive iron. Intervals of low MDF NRM values, which coincide with indicators of reduced sea ice cover, are interpreted as times of stronger vertical mixing of the water column, which allows fresh marine organic matter and reactive iron to reach the seafloor, driving the pyritization process to completion.

Zeroing tests of luminescence sediment dating in the Arctic Ocean: Review and new results from Alaska-margin core tops and central-ocean dirty sea ice

Additional numeric dating techniques are needed for sediments in the Arctic Ocean that span at least the last half million years. Almost all presently suitable geochronometers are relative-dating methods, requiring significant assumptions about sedimentation rates (such as continuous deposition and preservation). An alternative ‘absolute’ geochronometer, luminescence sediment dating, assumes daylight exposure of siliciclastic grains before burial. Early tests and applications of thermoluminescence (TL) techniques in the western Arctic Ocean showed some promise, but trans-ocean application to core tops of more sensitive photon-stimulated-luminescence (PSL) multi-aliquot procedures revealed large regional variations in accuracy. Recent applications of single-aliquot PSL procedures to core tops and dirty sea ice refine our understanding of the limitations and capabilities of PSL dating in this ocean. Dirty sea ice is the source of most of the bottom sediment. Particular procedures for multi-aliquot and single-aliquot PSL dating produce near-zero ages for silt grains from 4 available dirty sea-ice samples. This suggests that TL and PSL age overestimates obtained previously from core-top samples were due mainly to bottom-current reworking (mixing or stripping) of silt grains in abyssal darkness, rather than due to sedimentation of relict-age grains from sea ice. Single-aliquot PSL dating of silt grains from core tops at two different-depth sites at the Alaskan margin reveals large variations in accuracy. This re-emphasizes the critical sensitivity of fine-silt PSL dating accuracy to the effects of bottom-current processes. These recent applications are beginning to provide a more precise knowledge of just where and how PSL methods are likely to be accurate in the Arctic Ocean.

Paleomagnetic constraints on the Holocene stratigraphy of the Arctic Alaskan margin

Two long Holocene piston cores (HLY0501-06JPC and -08JPC; herein after referred to as 6JPC and 8JPC) were raised from high sediment accumulation areas in the Arctic Alaskan margin in order to reconstruct the millennial- to centennial-scale behavior of Earth's magnetic field and to better constrain the regional chronostratigraphy of the Western Arctic. Paleomagnetic analyses using a u-channel cryogenic magnetometer (natural, anhysteretic and isothermal remanent magnetizations: NRM, ARM and IRM) and a vibrating sample magnetometer indicate that a strong and stable single component characteristic remanent magnetization carried by low coercivity pseudo-single domain (PSD) grains such as magnetite can be isolated in the postglacial unit of both cores, where the inclination values vary around the geocentric axial dipole (GAD) for the latitude of the coring sites and where the maximum angular deviation (MAD) values are generally lower than 5°. Apart from one interval in each core, all the derived relative paleointensity proxies (NRM/k LF, NRM/ARM and NRM/IRM) yield similar results. NRM/IRM was used as the preferred proxy because, based on cross-spectral analysis, it is not coherent with its normalizer. Based on the comparison with paleomagnetic records from Western North America, the paleomagnetic and physical analyses indicate that both sedimentary sequences have recorded some of the first reliable Arctic high-resolution records of paleomagnetic secular variation (inclination and declination) and relative paleointensity during the Holocene. In addition, full vector paleomagnetic correlations (inclination, declination and relative paleointensity) were used to constrain the chronology of core 6JPC, using core 8JPC and other previously published and independently dated sedimentary and volcanic records from Western North America. The Accelerator Mass Spectroscopy (AMS) radiocarbon-based postglacial chronology of core 8JPC indicates sedimentation rates higher than 300 cm/kyr on the continental shelf near Barrow Canyon from approximately 8000 to 5000 cal BP, followed by a major decrease in sediment deposition. In contrast, the postglacial deposition on the slope at core site 6JPC is relatively constant and sedimentation rates are nearly three times lower.

Late Quaternary stratigraphy and sedimentation patterns in the western Arctic Ocean

Sediment cores from the western Arctic Ocean obtained on the 2005 HOTRAX and some earlier expeditions have been analyzed to develop a stratigraphic correlation from the Alaskan Chukchi margin to the Northwind and Mendeleev–Alpha ridges. The correlation was primarily based on terrigenous sediment composition that is not affected by diagenetic processes as strongly as the biogenic component, and paleomagnetic inclination records. Chronostratigraphic control was provided by 14C dating and amino-acid racemization ages, as well as correlation to earlier established Arctic Ocean stratigraphies. Distribution of sedimentary units across the western Arctic indicates that sedimentation rates decrease from tens of centimeters per kyr on the Alaskan margin to a few centimeters on the southern ends of Northwind and Mendeleev ridges and just a few millimeters on the ridges in the interior of the Amerasia basin. This sedimentation pattern suggests that Late Quaternary sediment transport and deposition, except for turbidites at the basin bottom, were generally controlled by ice concentration (and thus melt-out rate) and transportation distance from sources, with local variances related to subsurface currents. In the long term, most sediment was probably delivered to the core sites by icebergs during glacial periods, with a significant contribution from sea ice. During glacial maxima very fine-grained sediment was deposited with sedimentation rates greatly reduced away from the margins to a hiatus of several kyr duration as shown for the Last Glacial Maximum. This sedimentary environment was possibly related to a very solid ice cover and reduced melt-out over a large part of the western Arctic Ocean.

The role of currents and sea ice in both slowly deposited central Arctic and rapidly deposited Chukchi–Alaskan margin sediments

A study of three long cores from the outer shelf and continental slope north of Alaska in the Arctic Ocean indicate that localized drift deposits occur here with sedimentation rates of more than 1.5 m/kyr during the Holocene. Currents in this area average about 5–20 cm/s but can reach 100 cm/s and these velocities transport the sediment found in these cores primarily as intermittent suspended load. These high accumulation sediments form levee-like deposits associated with margins of canyons cutting across the shelf and slope. Unlike most textural investigations of Arctic sediment that focus on the coarser ice-rafted detritus (IRD), this paper focuses on the > 95% of the sediment, which is finer than 45 μm. The mean size of this fraction varies between 6 and 15 μm in Holocene sediments from the Chukchi–Alaskan shelf and slope with the higher values closer to shore. Analysis of detailed size distributions of these Holocene deposits are compared to 34 sediment samples collected from sea ice across the Arctic Ocean and to Holocene sediment from central Arctic Ocean cores and indicate that similar textural parameters occur in all of these sediments. Principal components of these size distributions indicate that sea ice is an important link between the shelves and the central Arctic. Factor scores indicate nearly identical components in the clay and fine silt size fractions but very different components in the coarse silt for sea ice sediment and central Arctic ridge sediments compared to shelf and continental slope deposits. Sea ice must contribute to sedimentation in both of these Arctic regions, but bottom currents dominate in the slope region, forming drift deposits.

Holocene fluctuations in Arctic sea-ice cover: dinocyst-based reconstructions for the eastern Chukchi SeaThis article is one of a series of papers published in this Special Issue on the theme Polar Climate Stability Network.GEOTOP Publication 2008-0023.

Cores from site HLY0501-05 on the Alaskan margin in the eastern Chukchi Sea were analyzed for their geochemical (organic carbon, δ13Corg, Corg/N, and CaCO3) and palynological (dinocyst, pollen, and spores) content to document oceanographic changes during the Holocene. The chronology of the cores was established from 210Pb dating of near-surface sediments and 14C dating of bivalve shells. The sediments span the last 9000 years, possibly more, but with a gap between the base of the trigger core and top of the piston core. Sedimentation rates are very high (∼156 cm/ka), allowing analyses with a decadal to centennial resolution. The data suggest a shift from a dominantly terrigenous to marine input from the early to late Holocene. Dinocyst assemblages are characterized by relatively high concentrations (600–7200 cysts/cm3) and high species diversity, allowing the use of the modern analogue technique for the reconstruction of sea-ice cover, summer temperature, and salinity. Results indicate a decrease in sea-ice cover and a corresponding, albeit much smaller, increase in summer sea-surface temperature over the past 9000 years. Superimposed on these long-term trends are millennial-scale fluctuations characterized by periods of low sea-ice and high sea-surface temperature and salinity that appear quasi-cyclic with a frequency of about one every 2500–3000 years. The results of this study clearly show that sea-ice cover in the western Arctic Ocean has varied throughout the Holocene. More importantly, there have been times when sea-ice cover was less extensive than at the end of the 20th century.