This paper assesses the current knowledge of 1,3-butadiene as an atmospheric pollutant, considers measurement techniques and reviews available data on 1,3-butadiene monitoring and emissions estimates. Atmospheric chemistry, sources of emission, current legislation, measurement techniques and monitoring programmes for 1,3-butadiene are reviewed. There have been comparatively few studies of the products of oxidation of 1,3-butadiene in the atmosphere. However, on the basis of the available information, and by analogy with the oxidation mechanism for the widely-studied and structurally similar natural hydrocarbon isoprene (2-methyl-1,3-butadiene), it is possible to define some features of the likely oxidation pathways for 1,3-butadiene. The total UK 1,3-butadiene emission to the atmosphere for 1996 has been estimated at 10.60 kTonnes. 1,3-Butadiene is a product of petrol and diesel combustion; consequently this total is dominated by road transport exhaust emissions (accounting for some 68% of the total). Off-road vehicles and machinery are responsible for 14% of the total UK emission. 1,3-Butadiene is used in the manufacture of numerous rubber compounds, and consequently emissions arise from both the manufacture and use of 1,3-butadiene in industrial processes. Emissions from the chemical industry account for 18% of the UK total emission- 8% from 1,3-butadiene manufacture and 10% from 1,3-butadiene use. The United Kingdom Expert Panel on Air Quality Standards (EPAQS) has published a report on 1,3-butadiene, and recommended a national air quality standard of 1.0 ppb (expressed as an annual rolling mean). This was adopted by the Government as part of the National Air Quality Strategy (NAQS) in 1997, and a target of compliance by 2005 was set. Work conducted for the review of the NAQS (1999) indicated that it was likely that all locations would be compliant with the national standard by the end of 2003. As a result, the review updated the air quality objective for 1,3-butadiene, with the deadline for compliance being brought forward to 31/12/2003. The UK Hydrocarbon Monitoring Network provides continuous hourly measurements of 1,3-butadiene at 13 sites, and has been operational since 1993. The dataset that is available allows spatial and temporal trends to be evaluated, and has proved to be invaluable in characterising the current ambient levels of 1,3-butadiene in the UK. Hourly maximum concentrations of 1,3-butadiene of up to 10 ppb (1 ppb=1 ppb, i.e. 1 vol. of 1,3-butadiene in 1 000 000 000 vol. of air. 1 ppb of 1,3-butadiene is ca. equal to 2.25 μg m −3 at 20°C) may be measured for several hours at the sites. Monthly mean concentrations are typically 0.1–0.4 ppbv. At most sites, these levels are driven by emissions from motor vehicles. Occasionally emissions of 1,3-butadiene from industrial sources may elevate 1,3-butadiene concentrations to several tens of ppb. Trend analysis of the data suggests that ambient concentrations of 1,3-butadiene in the UK are declining at about 10% per year.