Pressure Drop Research Articles

Research on Developing Cyclone Coupling Techniques for Heterogeneous Separators with Design Optimization of Hydrocyclone Separators

Abstract: Hydrocyclone separator is a widely used equipment in the field of liquid-solid separation due to its simple structure, convenient operation, and high separation efficiency. This paper provides a comprehensive review of the working principles, application areas, design optimization, and performance evaluation of hydrocyclone separators, while discussing their future development trends. In addition, particular attention has been given to the aspects related to patents in this study.The focus is on analyzing the structural parameters and flow field characteristics of hydrocyclone separators, as well as the different effects on separation efficiency caused by various hydrocyclone structures and adjustments in hydrocyclone size. The research analysis is conducted on the inlet, cylindrical section, overflow pipe section, cone section, hydrocyclone materials, and other parts, taking into account detailed analysis of operational conditions such as inlet flow rate, pressure drop, separation efficiency, and fluid properties. The future development trend of hydraulic hydrocyclone separators lies in refinement, intelligence, multifunctionality, integration, and energy-saving and environmental protection. In the field of liquid-solid separation, the integration of hydrocyclone separation technology and intelligent devices is becoming increasingly important, and future research will focus on developing new hydrocyclone coupling separation techniques to further improve production efficiency and convenience in daily life. The application prospects are broad, and it is expected to bring significant economic and social benefits to society. It also possesses the potential for patent protection.

Numerical Investigation of Flow Inside a Channel with Elastic Vortex Generator and Elastic Wall for Heat Transfer Enhancement

In the present investigation, a detailed numerical investigation of the flow and heat transfer characteristics of a channel with an elastic fin (vortex generator) and an elastic wall has been carried out using finite element method. The Fluid-Structure Interaction (FSI) model is used to capture the interaction between the fluid and the solid structure. A sinusoidal time dependent velocity profile has been imposed at the inlet of the channel and the right half of the upper wall of the channel is heated and exposed to constant temperature boundary condition. Due to the sinusoidal velocity profile at the inlet, the elastic fin oscillates periodically and act as a vortex generator, which causes more turbulence in the flow. The obtained results showed that the Nusselt number over the heated wall is affected by the position of the flexible fin, height of flexible fin and elasticity modulus of elastic fin. Moreover, due to the elasticity of the elastic wall and sinusoidal behavior of the inlet velocity, the elastic wall oscillates periodically upward and downward. The Nusselt number values over the heated wall are increased with decrease of the elastic modulus value of the elastic wall. However, the decrease in elastic modulus value of the elastic wall contributes to an increase in the pressure drop inside the channel. It should be added that the interplay between the fluid motion and the deformable structures leads to enhanced turbulence, as the flexible fin and elastic wall introduce additional disturbances and fluctuations into the flow regime. Consequently, this heightened turbulence level has profound implications for heat transfer processes within the system.

Thermal management of lithium-ion batteries based on the coupling of liquid cooling and composite phase change materials

ABSTRACT Effective thermal management techniques for lithium-ion batteries are crucial to ensure their optimal efficiency. This paper proposes a thermal management system that combines liquid cooling with composite phase change materials (PCM) to enhance the cooling performance of these lithium-ion batteries. A numerical study was conducted to examine the impact of various factors on the battery module’s thermal management performance, including the number of flow channels, the distance between these flow channels and the upper and front surfaces, fluid flow rate, coolant inlet temperature, and material’s phase change temperature. The simulation results indicate that at a discharge rate of 6C and a flow channel count of 5, the maximum temperature and the maximum temperature difference of the battery module decrease by 6.44% and 34.35%, respectively, when PCM is coupled with liquid cooling, compared to the pure liquid cooling. However, as the flow rate increases, the rate of temperature reduction slows down, while the pressure drop increases. When the flow rate reaches 0.4 m/s, the maximum temperature only drops by 0.57°C while the pressure drop increases by nearly two times. Furthermore, an increase in the PCM’s melting temperature leads to a larger maximum temperature difference in the battery module. This effect is more pronounced with higher coolant inlet temperatures. Therefore, careful consideration of both flow rate and coolant inlet temperature is essential for designing an effective thermal management system for batteries.

Numerical investigations of heat transfer and pressure drop in packed bed duct exposed to forced convection boundaries under local thermal non-equilibrium conditions

The present study is a 2-D numerical study which discusses the thermohydraulic performance of packed bed duct under local thermal non-equilibrium and steady state conditions exposed to forced convection boundaries (BC-6). The numerical model is well validated with the experimental work reported in the literature and found to be accurate enough to perform further parametric investigations. The analysis is done to see the effect of different ball diameter (5 mm, 9 mm and 11 mm), bed porosity, heat transfer fluid (air, water and engine oil - Pr = 0.70–645) and ball material (EPS, steel and bronze) on heat transfer and fluid flow characteristics in turbulent flow region of Reynolds number ranging from 900 to 14,320. The numerical results obtained using commercial CFD software COMSOL shows that, the heat transfer coefficient and pressure drop in packed bed increases with increase in ball diameter, thermal conductivity of ball and bed porosity which is exactly reverse as reported in literature for BC-1 to BC-5. The maximum thermal performance factor with bronze particles is 2.45 and 24.5 times more than stainless steel and EPS particles respectively for larger particle size and bed porosity. Engine oil exhibits significantly higher heat transfer coefficient (9.7 × 105 W/m2K) and pressure drop (3.3 × 106 Pa) compared to water (40,126 W/m2K and 2028 Pa) and air (600 W/m2K and 250 Pa) respectively. Overall, the combination of water as heat transfer fluid along with bronze particles of larger diameter and larger bed porosity emerges as the optimal choice for enhancing heat transfer in the packed duct exposed to forced convection boundary condition BC-6.

Numerical simulation of an innovative design of solar air heater using spiral duct inserts for enhancing thermal efficiency

ABSTRACT An innovative design of solar air heater (SAH) with spiral shape is numerically analyzed in this paper. The spiral-shaped SAH hydro-thermal performance is studied for different air mass flow rates using CFD COMSOL Multiphysics software. The outlet air temperature difference, thermal efficiency, flow structure, thermal field and pressure drop are the main parameters which are considered to estimate the fluid flow and heat transfer behaviors of the SAH. The simulation is realized for 1000 W/m2 of solar heat flux and 25°C of ambient temperature as typical climatic conditions in a middle day. The results show that the maximum outlet temperature difference of the SAH reached 93.08°C with 0.0083 kg/s of air mass flow rate. For the range of 0.0083–0.0332 kg/s, the thermal efficiency is varied from 91.41% to 99.01%. The ambitious percentage of the thermal efficiency of 99.01% was observed for 0.012 kg/s. The proposed design provides high thermal efficiency of SAH compared to other configurations of SAH.

Evaluation of extra-corporeal membrane oxygenator cannulae in pulsatile and non-pulsatile pediatric mock circuits.

This study evaluated the hemodynamic performance of arterial and venous cannulae in a compliant pediatric extracorporeal membrane oxygenation (ECMO) mock circuit in pulsatile and non-pulsatile flow conditions. The ECMO setup consisted of an oxygenator, diagonal pump, and standardized-length arterial/venous tubing with pressure transducers. A validated left-heart mock loop was adapted to simulate pediatric conditions. The pulsatile flow was driven by a computer-controlled piston pump set at 120 bpm. A roller pump was used for non-pulsatile conditions. The circuit was primed with 40% glycerol-based solution. The cardiac output was set to 1 L/min and the aortic pressure to 40-50 mmHg. Four arterial cannulae (8Fr, 10Fr, 12Fr, 14Fr) and five venous cannulae (12Fr, 14Fr, 16Fr, 18Fr, 20Fr) (Medtronic, Inc., Minneapolis, MN, USA) were tested at increasing flow rate in 12 combinations. The pulsatile condition required lower ECMO pump speeds for all cannulae combinations at a given flow rate, inducing a significantly smaller increase of flow in the mock loop. Under non-pulsatile conditions, the aortic and arterial pressures in the cannulae were higher (p < 0.01) while no significant differences in pressure drop and pressure-flow characteristics (M-number) were observed. The total hemodynamic energy was higher in case of non-pulsatile flow (p < 0.01). Under non-pulsatile conditions, the system was characterized by overall higher pressures, resulting in higher support to the patient. The consequent increase of potential energy compensates for increases of kinetic energy, leading to a higher total hemodynamic energy. Pressure gradients and M number are independent of the testing conditions. Pulsatile testing conditions led to more physiological testing conditions, and it is recommended for ECMO testing.

Association between autonomic dysfunction, 12-year mortality and 10-year incident cardiovascular disease

Abstract Background Standing from a supine position requires a co-ordinated response in peripheral and central haemodynamic signals to protect the brain and body from sudden drops in blood pressure (BP) and has previously been shown to be an important measure of neuro-cardiovascular health (1-3). Previous studies have found an association between BP and heart rate recovery (HRR) to standing with all-cause mortality, cardiovascular disease and other health outcomes (4-8). However, almost all of these studies have exclusively investigated the association of consensus-defined HR/BP phenotypes measured at specific timepoints during standing. Purpose We hypothesised that assessing information from the entire haemodynamic response to orthostasis - instead of discrete timepoints or consensus definitions - may uncover novel associations between BP/HR responses to active stand and neuro-cardiovascular health in older adults. This may afford better physiological understanding of the longitudinal relationships between the response to standing and both Cardiovascular Disease (CVD) and mortality. Methods We used functional Principal Components Analysis (FPCA) to examine the determinants of variability in the complete haemodynamic response to active stand and examine which components were related to mortality and incident CVD in &amp;gt;4500 community-dwelling adults aged 50+. Results Figure 1 shows the mean response curve according to mortality status and Figure 2 the mean curve for participants free of CVD at baseline who later have CVD vs those who remain CVD-free during 10 year follow-up. All-cause mortality was associated with functional principal components which discriminate higher baseline HR, blunted HR peak and impaired HRR up to ~25 seconds after standing. Components that discriminated high baseline and impaired recovery of SBP from the post-stand nadir to 60 seconds post stand were also associated with all-cause mortality. This association remained even after covariate adjustment. Interestingly, neither baseline SBP nor orthostatic hypotension (OH) were associated with mortality. Components which discriminate high baseline and blunted HR peak; elevated stroke volume index and impaired recovery of DBP from ~25 seconds post stand were associated with 10-year incident CVD. Conclusions To our knowledge this is the first study to incorporate data driven information over the entire trace of the haemodynamic response to standing to investigate associations with incident CVD and mortality. The fact that components which discriminated high BP and impaired recovery of BP were associated with 12-year mortality and 10-year incident CVD when traditional summary measures of OH and baseline BP were not; suggests that incorporating information across the entire response to standing allows for richer and more flexible associations with health outcomes to be uncovered and allows for a better understanding of the underlying physiology leading to such associations.Figure 1:Mean trace of Mortality StatusFigure 2:Mean Trace of CVD Status

A Novel Liquid–Solid Fluidized Bed of Large-Scale Phase-Changing Sphere for Thermal Energy Storage

The storage of thermal energy has been hindered by the low heat-transfer rate of the solid phase of the phase-changing materiel. With water being the heat-transfer fluid as well as the liquid phase in the liquid–solid two-phase system, a novel type of fluidized bed is designed in this study. Numerous hollow spheres are fabricated with phase-changing materiel encapsulated. Adding the solid–liquid phase-change material capsules to the flowing fluid, the capsules are dispersed suspended in the carrier. The large spheres, 25 mm in present experiment, possess the merits of guaranteeing energy-storage density and tolerating internal interface chaotic motion. Both the fluidization status and phase-changing process are recorded by photography combined with image-processing technology. It is found that the large spheres, with density less than water, can be fluidized by the downward flowing fluid. As the flow rate increases, the expansion ratio of the solid phase increases and the regimes of incipient fluidization and bubbling fluidization can be observed. In comparison to the fixed bed, the oscillation of pressure drop across a fluidized bed is more severe, but the averaged value is less than the fixed bed. The melting and solidifying can be accelerated by 22.6% and 50%, respectively, thus proving the superiority of the fluidized bed in improving the heat-transfer rate while charging/discharging the thermal energy. Three types of basic movement of the spheres are shown to contribute to the enhanced phase-changing rate, which are shifting, colliding and rotating.

A Review of Comprehensive Guidelines for Computational Fluid Dynamics (CFD) Validation in Solar Chimney Power Plants: Methodology and Manzanares Prototype Case Study

This review provides a comprehensive examination of CFD modeling procedures for SCPP, with an emphasis on the detailed methodologies and a case study of the Manzanares prototype in Spain. The introduction delineates the historical context and physical modeling principles of solar chimneys, while highlighting their potential in industrial applications. The governing equations are meticulously discussed, covering assumptions in both 2D and 3D CFD modeling, the continuity and momentum equations, and the selection and accuracy of turbulence models, particularly the k-ε equations. The review also delves into heat transfer modeling, encompassing the energy equation and radiation modeling. Analytical evaluations of turbine pressure drop ratios and performance metrics for power generation efficiency are critically analyzed. The establishment of boundary conditions in solar chimney applications, including sky temperature assessments and distinctions between 2D and 3D boundary conditions, is extensively explored. Mesh generation techniques for both 2D and 3D CFD models are presented, supported by case studies. Parametric studies and experimental investigations are scrutinized to elucidate their impact on the performance of solar chimneys. The temperature–entropy diagram for an idealized Brayton cycle is introduced as a conceptual framework for efficiency analysis. Validation of the CFD codes, both 2D and 3D, against experimental data is performed to ensure model accuracy. The review further examines energy balance approaches in modeling solar chimneys, presenting state-of-the-art CFD results and discussing their implications in both 2D and 3D contexts. The synthesis of these findings culminates in a comprehensive conclusion, offering insights into the future directions and potential advancements in the CFD modeling of solar chimneys. This work aims to serve as a definitive reference for researchers and practitioners in the field, providing a robust foundation for the development and optimization of SCPP technology.

Filtration Performance of Biodegradable Electrospun Nanofibrous Membrane for Sub‐Micron Particles: A Systematic Review

AbstractNanofiber membranes receive considerable interest recently because of their distinctive structural features, facile preparation, as well as high filtering efficiency. Due to ever‐increasing air pollution, membranes made from biodegradable materials can play a crucial part in providing purified air with minimum concerns of environmental issues after the membrane's end of service life. The purpose of this systematic review is to assess the performance of biodegradable electrospun nanofibrous membrane filters toward air sub‐micron particles. To identify relevant studies, a systematic search is carried out in major scientific search engines including PubMed, Scopus, and the Web of Science. Data extraction is used to collect the necessary information on the membranes' structural properties, as well as filtration performance metrics such as efficiency, pressure drop, and quality factor. Among the electrospun membranes derived from biodegradable polymers, the polyvinyl alcohol (PVA)‐based electrospun membranes are more effective in filtration efficiency in capturing sub‐micron particles. The results highlight that these types of membranes are effective in filtration with low energy consumption, making them more apt for air purification. The use of such membranes can supply both high filtering performance and protection of the environment.

Factors influencing the outcomes of trabeculectomy, conventional canaloplasty, and mitomycin C augmented canaloplasty.

To compare the efficacy, safety, and factors influencing the outcomes of trabeculectomy (TE), conventional canaloplasty (cCP), and mitomycin C augmented canaloplasty (mCP) in glaucoma patients. Intraocular pressure (IOP), the number of IOP-lowering eye drops, and surgery-related complications were evaluated at baseline and through 18months postoperatively. Correlations between patients' demographic data, ophthalmic and non-ophthalmic conditions, outcomes and complications were evaluated. 171 patients were included. IOP and IOP-lowering eye drops were significantly (p < 0.001) reduced 18months after TE, cCP, and mCP. At the 18-month follow-up, IOP and IOP-lowering eye drops were significantly lower following TE than cCP (p < 0.001, p = 0.010, respectively) and mCP (p = 0.010, p = 0.014). At the 18-month follow-up, complete success rates were significantly higher after TE compared to cCP and mCP for IOP ≤ 21, 18, and 16mmHg (p < 0.001). Qualified success rates for IOP ≤ 16mmHg were higher following TE than cCP and mCP (p = 0.023). In the TE group, clinical hypotony at any postoperative follow-up was positively correlated with previous intravitreal anti-vascular endothelial growth factor (VEGF)-therapy (p < 0.001), leukaemia (p = 0.002), and a spherical equivalent < -3 dioptres (p < 0.001). There were no significant correlations in the cCP and mCP groups. TE, cCP, and mCP led to a significant reduction in IOP and IOP-lowering eye drops during 18months of follow-up. At 18months of follow-up, IOP and IOP-lowering eye drops were significantly lower following TE compared to cCP and mCP. Anti-VEGF-therapy, cystostatic therapy in leukaemia, and a spherical equivalent < -3 dioptres were significantly correlated with postoperative hypotony, macular folds, and choroidal detachment in the TE group. What is known • Trabeculectomy (TE) is considered the gold standard in the surgical management of glaucoma. However, TE involves extensive postoperative management and might be associated with severe surgery-related complications. What is new • In this study, intraocular pressure (IOP) and IOP-lowering eye drops were significantly lower following TE compared to conventional canaloplasty (cCP) and mitomycin C augmented canaloplasty (mCP) at a follow-up of 18months. • In patients undergoing TE, anti-VEGF-therapy, cystostatic therapy in leukaemia, and a spherical equivalent < -3 dioptres were significantly correlated with postoperative hypotony, macular folds, and choroidal detachment.

Needle-Free Targeted Injections Using Bubble Laser Technology in Therapeutics.

This work explores bubble laser technology as an alternative to needles in injection systems for vaccination, cancer treatment, insulin delivery, and catheter hygiene. The technology leverages laser-induced microfiltration and bubble dynamics to create high-speed pneumatic jets that penetrate the skin without needles, addressing discomfort, infection risk, and needle-related concerns. The system's performance is analyzed based on laser wavelength, pulse duration, and Gaussian beam droplet size. The findings indicate a significant increase in spot size at 1064 nm compared with 400 nm, consistent with the diffraction theory. Induced bubble dynamics reveal bubble generation, jetting, and fluid interactions as the Weber number increases, as well as jet velocity and fluid inertia. For femtosecond pulses, increasing the pulse duration from 100 to 1500 fs reduces the bubble lifespan from 0.8 to 0.3 arbitrary units, and the collapse pressure decreases from 2.1 to 0.4 bar. For picosecond pulses, the bubble lifetime decreases from 0.9 to 0.5 arbitrary units, and the pressure drop decreases from 2.0 to 0.4 bar as the pulse length extends from 2000 to 8000 ps. Jet formation in laser jet injection systems is enhanced by short pulses in water that produce longer-lasting bubbles. Drug delivery based on the Rayleigh-Plesset equation is characterized by a low-pressure collapse and short bubble lifetime. Thus, this relationship suggests that bubble laser technology can provide a more controlled and safer method of needle-free procedures, increasing compliance and reducing tissue trauma.

Thermal–Hydraulic Performance Analysis of Combined Heat Sink with Open Microchannels and Embedded Pin Fins

An open type of microchannel with diamond pin fins (OM-DPFs) is introduced for the cooling of high-performance electronic chips. For a Reynolds number (Re) of 247~1173, a three-dimensional model is established to explore the hydrothermal properties of the OM-DPF and compare it to traditional heat sinks with closed rectangular microchannels (RMs), heat sinks with open microchannels (OMs), and the results in the existing research. Firstly, the synergy between tip clearance and pin fins on the hydrothermal properties is discussed. Secondly, the entropy production principle is adopted to analyze the irreversible losses for different heat sinks. Lastly, the total efficiencies of different heat sinks are assessed. The RMs present the worst heat transfer with the lowest friction loss. For the OMs, the temperature and pressure drop are decreased slightly compared to those of the RMs, and the irreversible loss is reduced by 4% at Re = 1173 because of the small tip clearance. But the total efficiency is lower than that of the RMs because the pressure drop advantage is offset by the weak heat transfer. For the OM-DPF, the combined structure has a noticeable impact on the multiple physical fields and hydrothermal characteristics, which present the best thermal performance at the cost of the highest friction loss. The irreversible loss of heat transfer in the OM-DPF is reduced obviously, but the friction irreversible loss significantly increases at high Re values. At Re = 429, the total entropy production of the OM-DPF is reduced by 47.57% compared with the RM. Compared to the OM and the single-pin fin structure in the literature, the total efficiency of the OM-DPF is increased by 14.56% and 40.32% at Re = 614. For a pump power of 0.1 W, the total thermal resistance (Rth) of the OM-DPF is dropped by 23.77% and 21.19% compared to the RM and OM. For a similar Rth, the pump power of the combined structure is 63.64% and 42.86% lower than that of the RM and OM. Thus, the novel combined heat sink can achieve efficient heat removal while controlling the energy consumption of liquid cooling systems, which has bright application prospects.

Bifunctionalised acid-base hierarchically structured monolithic microreactor for continuous-flow tandem catalytic process of cyanocinnamate synthesis

The results on zirconia-amine bifunctional modification of hierarchically porous silica monoliths for continuous-flow processes ar presented. The study reports the synthesis and properties of the modified porous monoliths and their performance in the tandem process of deacetalization-Knoevenagel condensation reaction. The properties of the materials were studied by thermal analysis, FTIR spectroscopy, XRF and nitrogen adsorption. It was found that both active centres were uniformly distributed along the monolithic cores, and the antagonistic interaction of the acid and base centres was not observed. It was shown that hydrophobicity of the monolith surface has opposite effects on the efficiency of the studied reactions. The overall rate of the tandem process depends on the rate of the condensation reaction. The performance of the bifunctional microreactors was checked and compared with those of cascade-connected monofunctional microreactors and batch reactor. The yield of cyanocinnamate product obtained in both flow systems was ca. 78%; however, pressure drop in the bimodified reactor was only half of that in the cascade. An effective way of water supply to the reaction system has been proposed. The research demonstrates the benefits of using flow-through structured micro-/mesoreactors in tandem reaction processes.

High-Temperature-Resistant Dual-Scale Ceramic Nanofiber Films toward Improved Air Filtration.

Currently, air pollution primarily arises from industrial emissions, coal combustion, and automobile exhaust, posing significant challenges for mitigation. This highlights the urgent need for advanced and efficient filtration materials with low pressure drop and high-temperature resistance. Traditionally, improving filtration property has involved increasing the thickness of the filtration materials, which consequently leads to higher costs. Here, dual-scale mullite nanofiber (MNF) films containing interwoven thick nanofibers (606 nm) and thin nanofibers (186 nm) are prepared using solution blow spinning. The dual-scale structure design enables the films to maintain a low pressure drop while achieving high filtration efficiency. At an airflow velocity of 5.3 cm s-1, the films with an areal density of 3.8 mg cm-2, achieve a filtration efficiency of 98.23% and a pressure drop of 141 Pa for PM0.3. In addition, the MNF films exhibit excellent flexibility and high-temperature resistance, making them have great potential for use in high-temperature flue gas filtration.

Optimized performance of membrane-based desalination by high-throughput molecular dynamic simulations and machine learning analysis

The influence of pore size and hydrophilicity on the permeance of reverse osmosis (RO) membranes has been mostly focused. However, their influence is hardly to be clearly identified as these two kinds of factor interfere with each other. In this work, high-throughput molecular dynamics (HTMD) simulations with CNTs are used to extensively produce the data of water permeance and NaCl rejection. These data are then analyzed by machine learning (ML) method to obtain the optimized desalination performance. The HTMD results indicate that the pressure drop has little effect on the water permeance. Moreover, rising pore size and degrading hydrophilicity will generally boost water permeance but will somehow sacrifice the NaCl rejection. The interference effect between pore size and hydrophilicity is also found in this work, the mechanism of which is then revealed from molecular level. Additionally, ML is applied to analyze the abundant data of water permeance and NaCl rejection. The optimal conditions are identified to achieve the highest water permeance with 100% NaCl rejection, which are also validated via additional MD simulations. This work suggests that the integration of HTMD and ML promises the future of designing new kind of RO membranes for better performance.

Thermo-hydraulic performance characteristics of novel G-Prime and FRD Triply Periodic Minimal Surface (TPMS) geometries

Efficient thermal management is crucial for numerous applications, from electronics cooling and automobile systems to aerospace systems, necessitating the exploration of advanced heat transfer technologies like TPMS structures. Compared to conventional heat exchangers and heat sinks, lattice structures have improved by around 20–30 % performance. However, the variation in performance of the various lattice structures, such as FRD, G-Prime, etc., is yet unknown. Thus, this study investigates the thermo-hydraulic performance of various Triply Periodic Minimal Surface (TPMS) structures, including novel G-Prime and FRD geometries, through numerical simulations and experimental validation. The TPMS geometries were modeled using LattGen software and voxelized with 20 % relative density. Computational Fluid Dynamics (CFD) simulations were performed using Ansys Fluent with the k-epsilon turbulence model, and experiments were conducted on 3D-printed samples for validation. The numerical results reveal that G-Prime-2 and FRD Prime exhibit the highest heat transfer performance while demonstrating higher pressure drops than other TPMS geometries. Experimental validation agrees with numerical predictions, confirming the superior thermo-hydraulic performance of G-Prime-2 and FRD Prime for heat transfer enhancement applications. The results contribute to understanding TPMS thermo-hydraulic performance and enable informed geometry selection for thermal management applications.

Adaptive control of airway pressure during the expectoration process in a cough assist system

Existing Mechanical Insufflation-Exsufflation (MI-E) devices often overlook the impact of cough airflow pressure on mucus clearance, particularly lacking in control over airway pressure during the expiratory phase, which can lead to airway collapse and other types of airway damage. This study optimizes the design of cough assist system and explores the effectiveness of PID and adaptive control methods in regulating airway pressure. The adaptive control method compensates for hose pressure drop by online estimation of the ventilatory hose characteristics. It achieves precise tracking of target pressure and ensures the generation of peak flow rates effective for mucus clearance, even in the absence of known patient lung physiological states and unknown hose leakage parameters. Through a series of comparative experiments, this paper confirms the significant advantages of adaptive control in reducing oscillations and overshoot, capable of more stable and precise airway pressure adjustments. This improved control strategy not only enhances clinical safety but also significantly improves therapeutic outcomes and reduces the risk of complications. The findings indicate that the revamped cough assist system, employing an adaptive control strategy, can effectively prevent airway damage during assisted coughing, offering a safer and more effective sputum clearance solution for critically ill patients with expectoration disorders.

Thermal performance of shell-and-tube polymeric hollow fiber heat exchangers as oil coolers

Motor oil must be appropriately treated in motors, and aluminum plate heat exchangers are used to cool it. An aluminum heat exchanger is an additional part of the oil treatment module, which increases its size and weight. Two compact plastic shell-and-tube heat exchangers were tested alongside with aluminum heat exchanger to evaluate the efficiency of the plastic cooling core inside the oil module. A total of 63 experimental points were tested on three heat exchangers with good thermal balance (discrepancy of about 1,8 %), and the data were used to evaluate the heat transfer coefficients. While plastic unit PA11 showed the heat outputs exceeding the heat output of the aluminum plate unit by about 7 %, the pressure drops were about ten times higher. The unit PEEK showed good performance and pressure drops on the oil side, but the heat transfer was limited by a small heat transfer surface. Analysis of thermal resistances confirmed that the thermal resistance between the wall and the oil is dominant due to the oil's low thermal conductivity and high viscosity. The results showed that optimization of the fiber structures is needed, aiming to increase the oil flow around the fiber structures.

Curved-pipe flow with boundary conditions involving Bernoulli pressure

In this article, we study the steady-state flow of the incompressible viscous fluid through a thin distorted pipe with an arbitrary central curve. We prescribe the inflow and outflow boundary conditions involving the Bernoulli pressure with a given pressure drop. Using the multiscale expansion technique with respect to the pipe's thickness, we construct the higher-order asymptotic approximation of the flow given by the explicit formulae for the velocity and pressure. We also perform a detailed error analysis justifying the usage of the proposed solution and indicating its order of accuracy. For more information see https://ejde.math.txstate.edu/Volumes/2024/63/abstr.html