Aggregation-induced Emission Effect Research Articles

Design and application of Cd2+ polypeptide fluorescent probes based on Aggregation Induced Emission (AIE).

Cadmium is a toxic heavy metal, which is both an environmental pollutant, and a threat to human health. A fluorescent probe was developed to detect Cd2+ selectively, sensitively, and quickly. This study reports the successful development of a polypeptide fluorescent probe TPE-HC (TPE-His-Pro-Gly-Cys) which selectively detects Cd2+ by Aggregation-Induced Emission effect. After fluorescence excitation, Cd2+ can be effectively detected based on the change of fluorescence intensity. The detection limit of Cd2+ in buffer solution was determined to be 151 nM (R2 = 0.9933). This probe exhibits high sensitivity, high cell permeabilit y, and low biological toxicity, and can perform live cell imaging under biological conditions. This study indicates that TPE-HC can detect Cd2+ in biological environments.

Ultrasensitive Detection of Prostate Specific Antigen by an Unlabeled Fluorescence Aptasensor Based on the AIE Effect.

The accurate and sensitive detection of prostate specific antigen (PSA) is vital for the early diagnosis and treatment of prostate cancer. To this end, an unlabeled fluorescent aptasensor was constructed by using a novel Compound B {1,1'-(1,4-phenylene) bis(3-ethyl-1H-imidazol-3-ium) iodide} with aggregation-induced emission (AIE) activity as a fluorescence signal and NH2-Fe3O4 particle as an adsorption platform. Compound B could combine with prostate specific antigen aptamers (PSA-Apt) to form a PSA-Apt/B complex, which further generated the AIE effect. Then, PSA was added to the PSA-Apt/B solution. PSA combined with PSA-Apt/B to form the PSA-Apt/B/PSA complex. Next, NH2-Fe3O4 magnetic particles were added to the solution. Given that PSA-Apt/B/PSA would no longer combine with NH2-Fe3O4 magnetic particles, the PSA-Apt/B/PSA complex remained in the supernate after magnet separation, and the supernate showed strong fluorescence (I). When no PSA was added to the PSA-Apt/B solution, PSA-Apt/B could combine with NH2-Fe3O4 magnetic particles and would be sucked into the bottom of the test tube by magnet, and the supernate would show weak fluorescence (I0). Result showed that the difference between the above-mentioned two fluorescence values (∆I = I - I0) had an excellent linear relationship with the PSA concentration within the concentration range of 0.01-10ng/mL, and its limit of detection was 3pg/mL (S/N = 3). In addition, the sensor has high accuracy and can be directly used to test PSA in actual serum samples.

Supramolecular Sequential Light-Harvesting Systems for Constructing White LED Device and Latent Fingerprint Imaging.

The fabrication of supramolecular light-harvesting systems (LHS) with sequential energy transfer is of significance in utilizing light energy. In this study, we report the non-covalent self-assembly of a sequential LHS by pillar[5]arene-based host-guest interaction in water and its applications in white light-emitting diode (LED) device and latent fingerprint imaging. The host-guest complex WP5⸧G self-assembles into nanoparticles in water and shows enhanced aggregation-induced emission (AIE) effect. The nanoparticles can be further used to construct sequential LHS with fluorescent dyes 4,7-di(2-thienyl)-benzo[2,1,3]thiadiazole (DBT) and sulforhodamine 101 (SR101). Impressively, the system shows white-light emission when the molar ratio of WP5⸧G/DBT/SR101 is 1100/2/16. The material can be coated on a LED bulb to achieve white-light emission. In addition, the sequential LHS exhibit color-tunable fluorescence including red emission, which have been successfully applied to high-resolution imaging of latent fingerprints. Therefore, we demonstrated a general strategy for the construction of sequential LHS in water based on macrocyclic host-guest interaction and explored its multi-functional applications in white-light LED device and imaging of latent fingerprints, which will promote future development and application of supramolecular LHSs.

Mechanical Bond Induced Enhancement and Purification of Pyrene Emission in the Solid State.

To address key concerns on solid-state pyrene-based luminescent materials, we propose a novel and efficient mechanical bond strategy. This strategy results in a transformation from aggregation-caused quenching (ACQ) to aggregation-induced emission (AIE) effect and a remarkable enhancement of pyrene emission in the solid state. More importantly, an unusual purification of emission is also achieved. Through computational calculation and experimental characterization, finally determined by X-ray diffraction analysis, we prove that the excellent emissions result from the refined molecular arrangements, including reduced π-π stacking, well-ordered packing and enhanced structural stability. This work demonstrates the potential of mechanical bond in the field of organic luminescent molecules, providing a new avenue for developing high-performance organic luminescent materials and beyond.

Oxygen self-sufficient nanodroplet composed of fluorinated polymer for high-efficiently PDT eradicating oral biofilm

Oral biofilm is the leading cause of dental caries, which is difficult to completely eradicate because of the complicated biofilm structure. What's more, the hypoxia environment of biofilm and low water-solubility of conventional photosensitizers severely restrict the therapeutic effect of photodynamic therapy (PDT) for biofilm. Although conventional photosensitizers could be loaded in nanocarriers, it has reduced PDT effect because of aggregation-caused quenching (ACQ) phenomenon. In this study, we fabricated an oxygen self-sufficient nanodroplet (PFC/TPA@FNDs), which was composed of fluorinated-polymer (FP), perfluorocarbons (PFC) and an aggregation-induced emission (AIE) photosensitizer (Triphenylamine, TPA), to eradicate oral bacterial biofilm and whiten tooth. Fluorinated-polymer was synthesized by polymerizing (Dimethylamino)ethyl methacrylate, fluorinated monomer and 1-nonanol monomer. The nanodroplets could be protonated and behave strong positive charge under bacterial biofilm acid environment promoting nanodroplets deeply penetrating biofilm. More importantly, the nanodroplets had extremely high PFC and oxygen loading efficacy because of the hydrophobic affinity between fluorinated-polymer and PFC to relieve the hypoxia environment and enhance PDT effect. Additionally, compared with conventional ACQ photosensitizers loaded system, PFC/TPA@FNDs could behave superior PDT effect to ablate oral bacterial biofilm under light irradiation due to the unique AIE effect. In vivo caries animal model proved the nanodroplets could reduce dental caries area without damaging tooth structure. Ex vivo tooth whitening assay also confirmed the nanodroplets had similar tooth whitening ability compared with commercial tooth whitener H2O2, while did not disrupt the surface microstructure of tooth. This oxygen self-sufficient nanodroplet provides an alternative visual angle for oral biofilm eradication in biomedicine.

Ultra-long room temperature phosphorescent materials based on tetraphenylethylene derivatives for anti-counterfeiting and encryption applications

Stimuli-responsive room temperature phosphorescent materials have been the subject of considerable research activity in recent years. In this study, the tetraphenylethylene group was selected in combination with arylboronic acid (TIPE-BOH) and used to dope a rigid polyvinyl alcohol (PVA) matrix to generate a film material (TIPE-BOH-PVA) that exhibited an aggregation-induced emission (AIE) effect. The prepared film exhibits excellent room temperature phosphorescence (RTP) performance, with an enhanced emission wavelength and an afterglow time of up to 12 s. The triplet-to-singlet Förster resonance energy transfer (TS-FRET) has been utilized to modify the afterglow color by adding butyl rhodamine B (BRhB) and rhodamine 6G (R6G), employing a water phase without the use of organic solvents. The resultant material exhibits stimulus responsiveness; the RTP properties disappear when the material is exposed to water vapor, but are restored following thermal treatment. The material has potential applications in information encryption and erasure, double anti-counterfeiting ink, and fingerprint acquisition systems. This work offers a new strategy for the design of stimuli-responsive ultra-long RTP materials with far-ranging end applications.

A Novel Enhanced-Fluorescent Probe Based on DHLA-Stabilized Red-Emitting Copper Nanoclusters for Methimazole Detection Via Aggregation-Induced Emission Effect.

Herein, an aqueous phase synthesis approach was presented for the fabrication of copper nanoclusters (Cu NCs) with aggregation-induced emission (AIE) property, utilizing lipoic acid and NaBH4 as ligands and reducing agent, respectively. The as-synthesized Cu NCs exhibit an average size of 3.0 ± 0.2nm and demonstrate strong solid-state fluorescence upon excitation with UV light. However, when dissolved in water, no observable fluorescent emission is detected in the aqueous solution of Cu NCs. Remarkably, the addition of Methimazole induced a significant red fluorescence from the aqueous solution of Cu NCs. This unexpected phenomenon can be ascribed to the aggregation of negatively charged Cu NCs caused by electrostatic interaction with positively charged imidazole groups in Methimazole, resulting in enhanced fluorescence through AIE mechanism. Therefore, there exists an excellent linear correlation between the fluorescent intensities of Cu NCs aqueous solution and the concentration of Methimazole within a range of 0.1-1.5 mM with a low limit of detection of 82.2 µM. Importantly, the designed enhanced-fluorescent nanoprobe based on Cu NCs exhibits satisfactory performance in assaying commercially available Methimazole tablets, demonstrating its exceptional sensitivity, reliability, and accuracy.

Rapid detection of hypobromous acid by a tetraphenylethylene-based turn-on fluorescent AIE probe and its applications

BackgroundSimilar to hypochlorous acid (HClO), hypobromous acid (HBrO) is one of the most notable reactive oxygen species (ROS). Overexpression of HBrO is linked to various diseases causing organ and tissue loss. Due to HBrO's role in the oxidation of micropollutants, real-time monitoring of HBrO in water-based systems is essential. Tetraphenylethylene (TPE)-based organic aggregation-induced emission luminophores (AIEgens) are an emerging category of fluorescent probe materials that have attracted considerable attentions. However, AIE probes are rarely applied to detect HBrO. Developing faster, more precise, and more sensitive AIE probes is thus crucial for detecting biological and environmental HBrO. ResultsA small molecule fluorescent probe 4-(1,2,2-triphenylvinyl)benzamidoxime (SWJT-21) was synthesized for the sensitive and selective detection of hypobromous acid (HBrO) based on aggregation-induced emission (AIE). The amidoxime unit of SWJT-21 would undergo an oxidation reaction with HBrO, leading to a structure differentiation between the probe and the product, and therefore the turn-on fluorescence by the AIE effect. The probe could recognize hypobromous acid rapidly (less than 3 s) in high aqueous phase (99 % water) with a turn-on fluorescence response. It was determined that the limit of detection for HBrO was 5.47 nM. Moreover, SWJT-21 demonstrates potential as a test strip for the detection of HBrO. SWJT-21 was also successfully used for the monitoring of HBrO in water samples and for the detection of endogenous/exogenous HBrO in living cells and zebrafish. SignificanceA special AIE fluorescence turn-on probe SWJT-21 based on tetraphenylethylene was designed for detecting HBrO in the environmental and biological systems. This probe has an extremely low detection limit of 5.47 nM and is able to detect HBrO in 99 % aqueous phase in less than 3 s.

Two-Photon-Responsive "TICT + AIE" Active Naphthyridine-BF2 Photoremovable Protecting Group: Application for Specific Staining and Killing of Cancer Cells.

The combined effects of twisted intramolecular charge transfer (TICT) and aggregation-induced emission (AIE) phenomena have demonstrated a significant influence on excited-state chemistry. These combined TICT and AIE features have been extensively utilized to enhance photodynamic and photothermal therapy. Herein, we demonstrated the synergistic capabilities of TICT and AIE phenomena in the design of the photoremovable protecting group (PRPG), namely, NMe2-Napy-BF2. This innovative PRPG incorporates TICT and AIE characteristics, resulting in four remarkable properties: (i) red-shifted absorption wavelength, (ii) strong near-infrared (NIR) emission, (iii) viscosity-sensitive emission property, and (iv) accelerated photorelease rate. Inspired by these intriguing attributes, we developed a nanodrug delivery system (nano-DDS) using our PRPG for cancer treatment. In vitro studies showed that our nano-DDS manifested effective cellular internalization, specific staining of cancer cells, high-resolution confocal imaging of cancerous cells in the NIR region, and controlled release of the anticancer drug chlorambucil upon exposure to light, leading to cancer cell eradication. Most notably, our nano-DDS exhibited a substantially increased two-photon (TP) absorption cross section (435 GM), exhibiting its potential for in vivo applications. This development holds promise for significant advancements in cancer treatment strategies.

Aggregation-Induced Emission of Naphthalene Diimides: Effect of Chain Length on Liquid and Solid-Phase Emissive Properties.

The aggregation-induced emission (AIE) properties of a systematic series of naphthalene diimides (NDIs) varying the chain length at the imide positions have been studied. A solvophobic collapse of NDI units through the flash injection of THF NDI solutions in sonicating water triggers the formation of stable suspensions with enhanced fluorescence emissions. Shorter chains favor the π-π stacking of NDI units through H-aggregation producing a strong AIE effect showing remarkably high quantum yields that have not been observed for non core-substitued NDIs previously. On the other hand, NDIs functionalized with longer chains lead to more disordered domains where π-π stacking between NDI units is mainly given by J-aggregation unfavoring the AIE effect.

Preparation of AIEgen-based near-infrared afterglow luminescence nanoprobes for tumor imaging and image-guided tumor resection.

Fluorescence imaging represents a vital tool in modern biology, oncology and biomedical applications. Afterglow luminescence (AGL), which circumvents the light scattering and tissue autofluorescence interference associated with real-time excitation source, shows remarkably increased imaging sensitivity and depth. Here we present a protocol for the design and synthesis of AGL nanoprobes with an aggregation-induced emission (AIE) effect to simultaneously red shift and amplify the afterglow signal for tumor imaging and image-guided tumor resection. The nanoprobe (AGL AIE dot) is composed of an enol ether format of Schaap's agent and a near-infrared AIE fluorogen (AIEgen) (tetraphenylethylene-phenyl-dicyanomethylene-4H-chromene, TPE-Ph-DCM) to suppress the nonradiative dissipation pathway. Pre-irradiating AGL AIE dots with white light could generate singlet oxygen to convert Schaap's agent to its 1,2-dioxetane format, thus initializing the AGL process. With the aid of AIEgen, the AGL shows simultaneously red shifted emission maximum (from ~540 nm to ~625 nm) and enhanced intensity (by 3.2-fold), facilitating better signal-to-background ratio, imaging sensitivity and depth. Intriguingly, the activated AGL can last for over 10 days. Compared with conventional approaches, our method provides a new solution to concurrently red shift and amplify afterglow signals for better in vivo imaging outcomes. The preparation of AGL AIE dots takes ~2 days, the in vitro characterization takes ~10 days (less than 1 day if not involving afterglow kinetic profile study) and the tumor imaging and image-guided tumor resection takes ~7 days. These procedures can be easily reproduced and amended after standard laboratory training in chemical synthesis and animal handling.

A simple “spraying” fluorescence‐guided surgery by AIE probes for liver tumor resection through configuration‐induced cross‐identification

AbstractSurgical resection is the preferred option for hepatocellular carcinoma (HCC), but surgical navigation technology using indocyanine green still has some drawbacks such as non‐specific imaging, thus it is very important to develop new fluorescence imaging technology. All‐cis hexaphenyl‐1,3‐butadiene derivative (ZZ‐HPB‐NC) with aggregation‐induced emission (AIE) feature has been reported to be quickly turned‐on fluorescent response in the intraoperative frozen‐section slides of HCC. However, the probe did not respond to normal liver tissue around HCC. In order to enhance the diagnostic rate and elucidate the response mechanism, all‐trans configuration EE‐HPB‐NC, was furtherly synthesized. Within two minutes, non‐cancer tissues could be fluorescently labeled by EE‐HPB‐NC by spraying, showing the same effect with ZZ‐HPB‐NC to HCC. The results indicated that the configuration‐induced cross‐identification fluorescence imaging strategy was achieved through the combination of ZZ‐ and EE‐HPB‐NC. Then the mechanism of HPB‐NC localization in HCC lesions was explored, and the binding of HPB‐NC with specific proteins in cells resulted in the AIE effect to label HCC cells. On this basis, the accuracy of specific fluorescence imaging for HCC was further verified on the mouse hepatic neoplasm models, indicating that it has clinical application potential for surgical fluorescence real‐time navigation.

Construction of glutathione-responsive paclitaxel prodrug nanoparticles for image-guided targeted delivery and breast cancer therapy.

Paclitaxel (PTX) remains an essential drug in the treatment of breast cancer. To improve metabolic stability and real-time monitoring of drug location, we develop a visualized nano-prodrug. Novel hyaluronic acid (HA)-coated glutathione (GSH)-sensitive chitosan (CS)-based nano-prodrug (HA/TPE-CS-SS-PTX NPs) with aggregation-induced emission effects (AIE) were accomplished. The prodrug NPs (drug loading 29.32%, particle size 105 nm, regular sphericity) exhibit excellent fluorescence stability. The prodrug NPs could target tumor cells with high expression of CD44 and decompose in the presence of high concentrations of glutathione. In vitro evaluations revealed that the prodrug NPs have significant cytotoxicity on 4T1 cells, and due to their excellent AIE characteristics, their position in cells can be tracked. Moreover, the prodrug NPs also shown superior anti-tumor effects in vivo experimental. Overall, the HA/TPE-CS-SS-PTX NPs we constructed have excellent bio-imaging capabilities and can be served as a potential nanomedicine for PTX delivery against breast cancer.

In Situ Monitoring and Tuning Multilayer Stacking of Polymer Lamellar Crystals in Solution with Aggregation-Induced Emission.

Many types of self-assembled 2D materials with fascinating morphologies and novel properties have been prepared and used in solution. However, it is still a challenge to monitor their in situ growth in solution and to control the number of layers in these materials. Here, we demonstrate that the aggregation-induced emission (AIE) effect can be applied for the in situ decoupled tracing of the lateral growth and multilayer stacking of polymer lamellar crystals in solution. Multilayer stacking considerably enhances the photoluminescence intensity of the AIE molecules sandwiched between two layers of lamellar crystals, which is 2.4 times that on the surface of monolayer crystals. Both variation of the self-seeding temperature of crystal seeds and addition of a trace amount of long polymer chains during growth can control multilayer lamellar stacking, which are applied to produce tunable fluorescent patterns for functional applications.

A novel triaminopyridine fluorescent probe based on AIE effect with high selectivity under solvent shielding effect

A new fluorescent probe TPA-DAP with aggregation-induced emission (AIE) characteristic based on 2,6-pyridinedicarboxylic acid was synthesized for the detection of paramagnetic ions (Cu2+, Co2+, Ni2+). In the DMF/PBS (5:95, v/v, pH = 7.40) solvent mixture, the fluorescence intensity exhibited a notable enhancement of over 3-fold when compared to DMF alone. Concurrently, fluorescence quenching phenomena were observed in the presence of Cu2+, Co2+, and Ni2+, with corresponding detection limits measured at 56.4 nM, 22.4 nM, and 26.5 nM, respectively. These detection limits were found to be lower than the prescribed thresholds for Cu2+ in Class I groundwater and Co2+, Ni2+ in Class III groundwater, multi-functional detection was possible. The coordination constants were 9.07 × 105, 3.63 × 105 and 5.69 × 105, respectively. However, in the DMSO system, the probe will be highly selective in the presence of solvent shielding effects. The probe showed more than 10-fold enhancement of fluorescence intensity in DMSO/Tris-HCl (5:95, v/v, pH = 7.00) compared to DMSO and specific detection of Cu2+ with a detection limit of 36.7 nM and a coordination constant of 4.35 × 105, and was cyclically detectable in the presence of EDTA. TPA-DAP was applied for the detection of Cu2+ in actual water samples and showed good biocompatibility and recyclability, making it suitable for water testing and test paper experiments, and also for a wide range of applications in the identification of Cu2+, Co2+, Ni2+ and other bioassays in cells and zebrafish. Solvents could be selected according to actual test requirements.

Molecular imprinting-based triple-emission ratiometric fluorescence sensor with aggregation-induced emission effect for visual detection of doxycycline

The development of high-performance sensors for doxycycline (DOX) detection is necessary because its residue accumulation will cause serious harm to human health and the environment. Here, a novel tri-emission ratiometric fluorescence sensor was proposed by using “post-mixing” strategy of different emissions fluorescence molecularly imprinted polymers with salicylamide as dummy template (DMIPs). BSA was chosen as assistant functional monomer, and also acted as sensitizers for the aggregation-induced emission (AIE) effect of DOX. The blue-emitting carbon dots and the red-emitting CdTe quantum dots were separately introduced into DMIPs as the response signals. Upon DOX recognition within 2 min, blue and red fluorescence of the tri-emission DMIPs sensor were quenched while green fluorescence of DOX was enhanced, resulting in a wide range of color variations observed over bluish violet-rosered-light pink-orange-yellow-green with a detection limit of 0.061 μM. The sensor possessed highly selective recognition and was successfully applied to detect DOX in complicated real samples. Moreover, with the fluorescent color collection and data processing, the smartphone-assisted visual detection of the sensors showed satisfied sensitivity with low detection limit. This work provides great potential applications for rapid and visual detection of antibiotics in complex substrates.

Machine Learning Prediction of Quantum Yields and Wavelengths of Aggregation-Induced Emission Molecules.

The aggregation-induced emission (AIE) effect exhibits a significant influence on the development of luminescent materials and has made remarkable progress over the past decades. The advancement of high-performance AIE materials requires fast and accurate predictions of their photophysical properties, which is impeded by the inherent limitations of quantum chemical calculations. In this work, we present an accurate machine learning approach for the fast predictions of quantum yields and wavelengths to screen out AIE molecules. A database of about 563 organic luminescent molecules with quantum yields and wavelengths in the monomeric/aggregated states was established. Individual/combined molecular fingerprints were selected and compared elaborately to attain appropriate molecular descriptors. Different machine learning algorithms combined with favorable molecular fingerprints were further screened to achieve more accurate prediction models. The simulation results indicate that combined molecular fingerprints yield more accurate predictions in the aggregated states, and random forest and gradient boosting regression algorithms show the best predictions in quantum yields and wavelengths, respectively. Given the successful applications of machine learning in quantum yields and wavelengths, it is reasonable to anticipate that machine learning can serve as a complementary strategy to traditional experimental/theoretical methods in the investigation of aggregation-induced luminescent molecules to facilitate the discovery of luminescent materials.

Benzothiazolium-based NIR AIE photosensitizers with type I and II ROS generation for efficient mitochondria-targeted photodynamic therapy.

In this work, a near-infrared emissive photosensitizer of 3,3-dimethyl-N,N-diphenyl-2-(thiophen-2-yl)-3H-indol-6-amine functionlized benzothiazolium (DPITT) was developed. DPITT exhibited aggregation-induced emission effect and potent type I and II reactive oxygen species generation capacities after white light irradiation. Taking advantage of the cationic feature, DPITT penetrated the cell membrane and selectively accumulated in the mitochondria in living cells. Upon white light irradiation, the photosensitized DPITT was able to induce mitochondrial dysfunction, leading to cell death. Photosensitized DPITT was further applied to disrupt the multicellular tumour spheroids, demonstrating its potential application in inhibiting hypoxic solid tumours.

Molecular engineering of tetraphenylethene/thiophene-based donor/π-bridge units to enhance the AIE effect and boost the oxygen-independent type-I ROS generation

The development of oxygen-independent type-I photosensitizers (PSs) with aggregation-induced emission (AIE) characteristics is highly in demand to treat hypoxic tumors but remains challenging. In this contribution, three anion-π+ AIE-PSs (TPEMA-SI, TPEMA-SSI, and TPETPA-SSI) with strong donor-π-acceptor (D-π-A) configurations were facially synthesized by modulating donor/π-bridge units. The strength of D-π-A configurations as well as the AIE-effect that collectively promotes the intersystem crossing (ISC) for boosting the type-I ROS could be enhanced significantly by tuning the electronic characters of D/π-bridge units. The anion-π+ AIE-PSs, with strong D-π-A configurations and heavy atom effect, produced a mixture of type-I as well as type-II ROS. Among them, TPETPA-SSI, with strong D-π-A configuration as well as greater AIE-effect, demonstrated superior type-I ROS generation efficiency. The biocompatible nanoparticles of anion-π+ AIE-PSs (AIE-PSs NPs) were fabricated after being encapsulated into an amphiphilic polymer (DSPE-PEG). The TPETPA-SSI NPs with superior ROS generation efficiency, demonstrate efficient PDT effects towards MCF-7 and U87MG cancer cells in both normoxia and hypoxia environments. This study provides insights into the design and development of type-I AIE-PSs by enhancing the strength of D-π-A configurations and the AIE effect

Combined fabrication of zeolitic imidazolate framework-8 and lanthanide towards coordination polymers: A dual-signal fluorescent probe for sensing Cu2+ based on synergistic effect of aggregation-induced emission and antenna effect

Copper ion (Cu2+) detection remains an important task for monitoring water quality because of its specific toxicity. Herein, a new dual-signal fluorescent probe was developed by combining zeolitic imidazolate framework-8 (ZIF-8) and lanthanide for the detection of Cu2+ for the first time. The lanthanide coordination polymer (guanosine monophosphate and Eu3+, GMP/Eu) was initially incorporated into ZIF-8 to yield ZIF-8/GMP/Eu nanomaterials with extremely weak single emission fluorescence at 618 nm. It was found that the resulted nanomaterials could display a dual emission fluorescence at 515 nm and 618 nm after the introduction of tetracycline (TC) due to the synergistic effect of aggregation-induced emission effect (AIE, TC induced by ZIF-8) and antenna effect (AE, between TC and GMP/Eu). Interestingly, in the presence of Cu2+, the AIE of TC was destroyed because of the interaction of Cu2+ with ZIF-8 and TC. The AE between TC and GMP/Eu disappeared due to the formation of complex between TC and Cu2+. A dual-signal fluorescent probe of ZIF-8/GMP/Eu/TC was thereby established for sensing Cu2+ in the range of 0.5–100 μM. Such a dual-signal response strategy that intelligently utilized the “ON”/“OFF” of AIE and AE can not only eliminate the background interference, but also ensure the improved selectivity of Cu2+ sensing. Subsequently, the dual-signal fluorimetric strategy was applied for the detection of Cu2+ in environmental water samples, indicating the potential feasibility of applications for water quality monitoring.