Viral Aerosols Research Articles

Enhanced removal of viral aerosols using nanosilver/TiO2-chitosan filters combined with a negative air ionizer

The presence of airborne viruses in bioaerosols is a significant and ongoing public health concern. In this context, this study aimed to develop a new filter that integrates nanosilver into a TiO2-chitosan matrix (nano-Ag/TiO2-CS) to inactivate the non-enveloped bacteriophage MS2 as a viral aerosol surrogate. The materials were characterized using various techniques, such as X-ray diffraction (XRD), scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HR-TEM), and X-ray photoelectron spectroscopy (XPS). The SEM images showed that the nano-Ag particles were spheres with a high surface area for virus interactions and that the fiber surfaces were covered by nano-Ag, which enhanced contact with viruses. The optimal 5 wt% nano-Ag/TiO2-CS filter combined with a negative air ionizer (NAI) showed the highest viral aerosol removal efficiency, which reached 97 %. The use of an NAI during filtration enhanced the inactivation of the viral aerosols. A long-term antiviral efficacy assessment showed that the nano-Ag/TiO2-CS filter demonstrated robust durability, which is vital for real-world applications. The nanofilter proposed in this work is simple, safe, and cost-effective for inactivating viral aerosols to improve indoor air quality.

Relative Humidity-Dependent Phase Transitions in Submicron Respiratory Aerosols.

Respiratory viruses, such as influenza and severe acute respiratory syndrome coronavirus 2, represent a substantial public health burden and are largely transmitted through respiratory droplets and aerosols. Environmental factors such as relative humidity (RH) and temperature impact virus transmission rates, and a precise mechanistic understanding of the connection between these environmental factors and virus transmission would improve efforts to mitigate respiratory disease transmission. Previous studies on supermicrometer particles observed RH-dependent phase transitions and linked particle phase state to virus viability. Phase transitions in atmospheric aerosols are dependent on size in the submicrometer range, and actual respiratory particles are expelled over a large size range, including submicrometer aerosols that can transmit diseases over long distances. Here, we directly investigated the phase transitions of submicrometer model respiratory aerosols. A probe molecule, Nile red, was added to particle systems including multiple mucin/salt mixtures, a growth medium, and simulated lung fluid. For each system, the polarity-dependent fluorescence emission was measured following RH conditioning. Notably, the fluorescence measurements of mucin/NaCl and Dulbecco's modified Eagle's medium particles indicated that liquid-liquid phase separation (LLPS) also occurs in submicron particles, suggesting that LLPS can also impact the viability of viruses in submicron particles and thus affect aerosol virus transmission. Furthermore, the utility of fluorescence-based measurements to study submicrometer respiratory particle physicochemical properties in situ is demonstrated.

347 Aerodynamic Size Distribution of SARS-CoV-2 Aerosol Shedding

OBJECTIVES/GOALS: We designed the Biocascade Exhaled Breath Sampler (BEBS) to characterize viral aerosol shedding among individuals with influenza and other respiratory virus infections. We first aimed to test the BEBS on volunteer COVID-19 cases and report the aerodynamic size distribution of exhaled breath aerosol particles carrying SARS-CoV-2 RNA. METHODS/STUDY POPULATION: From June 15 through December 15, 2022, we recruited 27 PCR-confirmed COVID-19 cases from a college campus and the surrounding community to provide 30-minute breath samples into a well-validated Gesundheit-II (G-II) exhaled breath aerosol sampler. Among these individuals, 17 provided an additional exhaled breath sample into the newly designed BEBS. We quantified samples for viral RNA using reverse transcription digital polymerase chain reaction (RT-dPCR) and determined the viral RNA copies collected within two aerosol size fractions (≤5 µm and >5 µm in diameter) from the G-II, and four aerosol size fractions (<1.15 µm, 1.15–3.2 µm, 3.3–8.2 µm, and >8.2 µm) from the BEBS. RESULTS/ANTICIPATED RESULTS: Individuals with a SARS-CoV-2 Omicron BA.4 or BA.5 infection shed virus in aerosols at an average rate of 7.5x103 RNA copies per 30-minute G-II sample, with 78% of the total RNA in aerosols ≤5 µm in diameter. Among the BEBS samples, 10% of the total viral RNA was detected in aerosols <1.15 µm, 43% in 1.15–3.2 µm, 37% in 3.3–8.2 µm, and 10% in the >8.2 µm size fraction. Based on viral RNA loads, our results indicate that exhaled aerosols ≤3.2 µm contribute the majority of SARS-CoV-2 inhalation exposure. DISCUSSION/SIGNIFICANCE: Our data provide additional evidence that respirable aerosols contribute to the spread of SARS-CoV-2. Thus, our data suggest that mitigation measures designed to reduce infectious aerosol inhalation, such as ventilation and the use of air cleaners and respirators, are needed to control the spread.

Impact of different hand-drying methods on surrounding environment: aerosolization of virus and bacteria, and transfer to surfaces

In recent years, hand drying has been highlighted as a key step in appropriate hand hygiene, as moisture on hands can increase the transfer of micro-organisms from hands to surfaces and vice versa. To understand bacterial and viral aerosolization following hand drying, and study the transfer of micro-organisms from hands to surfaces after drying using different methods. Groups of five volunteers had their hands pre-washed with soap, rinsed and dried, then inoculated with a concentrated mixture of Pseudomonas fluorescens and MS2 bacteriophage. Volunteers entered an empty washroom, one at a time, and rinsed their hands with water or washed their hands with soap prior to drying with a jet dryer or paper towels. Each volunteer applied one hand successively to various surfaces, while their other hand was sampled using the glove juice method. Both residual bacteria and viruses were quantified from the washroom air, surface swabs and hand samples. P.fluorescens and MS2 bacteriophages were rarely aerosolized while drying hands for any of the drying methods studied. Results also showed limited, and similar, transfer of both micro-organisms studied on to surfaces for all drying methods. The use of jet dryers or paper towels produces low levels of aerosolization when drying hands in a washroom. Similarly, all drying methods result in low transfer to surfaces. While the coronavirus disease 2019 pandemic raised concerns regarding public washrooms, this study shows that all methods tested are hygienic solutions for dry washed hands.

222 nm far-UVC light markedly reduces the level of infectious airborne virus in an occupied room

An emerging intervention for control of airborne-mediated pandemics and epidemics is whole-room far-UVC (200–235 nm). Laboratory studies have shown that 222-nm light inactivates airborne pathogens, potentially without harm to exposed occupants. While encouraging results have been reported in benchtop studies and in room-sized bioaerosol chambers, there is a need for quantitative studies of airborne pathogen reduction in occupied rooms. We quantified far-UVC mediated reduction of aerosolized murine norovirus (MNV) in an occupied mouse-cage cleaning room within an animal-care facility. Benchtop studies suggest that MNV is a conservative surrogate for airborne viruses such as influenza and coronavirus. Using four 222-nm fixtures installed in the ceiling, and staying well within current recommended regulatory limits, far-UVC reduced airborne infectious MNV by 99.8% (95% CI: 98.2–99.9%). Similar to previous room-sized bioaerosol chamber studies on far-UVC efficacy, these results suggest that aerosolized virus susceptibility is significantly higher in room-scale tests than in bench-scale laboratory studies. That said, as opposed to controlled laboratory studies, uncertainties in this study related to airflow patterns, virus residence time, and dose to the collected virus introduce uncertainty into the inactivation estimates. This study is the first to directly demonstrate far-UVC anti-microbial efficacy against airborne pathogens in an occupied indoor location.

Review of the research status on the transmission and diffusion characteristics of indoor viral aerosol particles.

This study reviews the generation and diffusion characteristics of indoor viral aerosol particles, numerical simulation methods for the diffusion process of viral aerosols, and related research on the impact mechanism of different ventilation methods on the diffusion process of viral aerosols. Research has shown that the selection of initial conditions such as exhalation mode, initial airflow velocity, particle size, turbulence model, and calculation method for the generation of aerosol particles by the human body is of great significance for the numerical simulation of the diffusion process of viral aerosol particles. At the same time, on the basis of selecting appropriate ventilation methods, the reasonable setting of ventilation parameters (temperature, speed, height, etc.) can effectively suppress the spread of viral aerosols. This study can provide a theoretical basis for the study of related respiratory diseases, as well as technical and theoretical support for the selection of indoor ventilation methods to reduce the risk of human exposure caused by viral aerosols in the construction field. It also provides guidance and reference for aerosol transport and environmental protection in indoor atmospheric environments.

Swallowing during provision of helmet ventilation: Review and provisional multidisciplinary guidance.

Use of noninvasive ventilation provided by a helmet increased globally during and after the COVID-19 pandemic. This approach may reduce need for intubation and its associated clinical complications in critically ill patients. Use of helmet interface minimizes virus aerosolization while enabling verbal communication, oral feeding and coughing/expectoration of secretions during its administration. Although improved oral hydration is a recognized benefit of helmet NIV, relatively little is known about the safety and efficiency of swallowing during helmet NIV. Risk of aspiration is a key consideration given the fragile pulmonary status of critically ill patients requiring respiratory support, and therefore the decision to initiate oral intake is best made based on multidisciplinary input. We reviewed the current published evidence on NIV and its effects on upper airway physiology and swallowing function. We then presented a case example demonstrating preservation of swallowing performance with helmet NIV. Last, we offer provisional multidisciplinary guidance for clinical practice, and provide directions for future research.

MVA-based vaccines are protective against lethal eastern equine encephalitis virus aerosol challenge in cynomolgus macaques.

MVA-based monovalent eastern equine encephalitis virus (MVA-BN-EEEV) and multivalent western, eastern, and Venezuelan equine encephalitis virus (MVA-BN-WEV) vaccines were evaluated in the cynomolgus macaque aerosol model of EEEV infection. Macaques vaccinated with two doses of 5 × 108 infectious units of the MVA-BN-EEEV or MVA-BN-WEV vaccine by the intramuscular route rapidly developed robust levels of neutralizing antibodies to EEEV that persisted at high levels until challenge at day 84 via small particle aerosol delivery with a target inhaled dose of 107 PFU of EEEV FL93-939. Robust protection was observed, with 7/8 animals receiving MVA-BN-EEEV and 100% (8/8) animals receiving MVA-BN-WEV surviving while only 2/8 mock vaccinated controls survived lethal challenge. Complete protection from viremia was afforded by both vaccines, with near complete protection from vRNA loads in tissues and any pathologic evidence of central nervous system damage. Overall, the results indicate both vaccines are effective in eliciting an immune response that is consistent with protection from aerosolized EEEV-induced disease.

Research advances in microfluidic collection and detection of virus, bacterial, and fungal bioaerosols.

Bioaerosols are airborne suspensions of fine solid or liquid particles containing biological substances such as viruses, bacteria, cellular debris, fungal spores, mycelium, and byproducts of microbial metabolism. The global Coronavirus disease 2019 (COVID-19) pandemic and the previous emergence of severe acute respiratory syndrome (SARS), Middle East respiratory syndrome (MERS), and influenza have increased the need for reliable and effective monitoring tools for bioaerosols. Bioaerosol collection and detection have aroused considerable attention. Current bioaerosol sampling and detection techniques suffer from long response time, low sensitivity, and high costs, and these drawbacks have forced the development of novel monitoring strategies. Microfluidic technique is considered a breakthrough for high performance analysis of bioaerosols. In recent years, several emerging methods based on microfluidics have been developed and reported for collection and detection of bioaerosols. The unique advantages of microfluidic technique have enabled the integration of bioaerosol collection and detection, which has a higher efficiency over conventional methods. This review focused on the research progress of bioaerosol collection and detection methods based on microfluidic techniques, with special attention on virus aerosols and bacterial aerosols. Different from the existing reviews, this work took a unique perspective of the targets to be collected and detected in bioaerosols, which would provide a direct index of bioaerosol categories readers may be interested in. We also discussed integrated microfluidic monitoring system for bioaerosols. Additionally, the application of bioaerosol detection in biomedicine was presented. Finally, the current challenges in the field of bioaerosol monitoring are presented and an outlook given of future developments.

Design and validation of a wind tunnel for viral aerosol filtration testing

Design and validation of a wind tunnel for viral aerosol filtration testing

Precise control of digital dental unit to reduce aerosol and splatter production: new challenges for future epidemics

BackgroundDuring dental procedures, critical parameters, such as cooling condition, speed of the rotary dental turbine (handpiece), and distance and angle from pollution sources, were evaluated for transmission risk of the Severe Acute Respiratory Syndrome Coronavirus 2 (SARS-CoV-2), simulated by spiking in a plasmid encoding a modified viral spike protein, HexaPro (S6P), in droplets and aerosols.MethodsTo simulate routine operation in dental clinics, dental procedures were conducted on a dental manikin within a digital dental unit, incorporating different dental handpiece speeds and cooling conditions. The tooth model was immersed in Coomassie brilliant blue dye and was pre-coated with 100 μL water spiked-in with S6P-encoding plasmid. Furthermore, the manikin was surrounded by filter papers and Petri dishes positioned at different distances and angles. Subsequently, the filter papers and Petri dishes were collected to evaluate the aerosol splash points and the viral load of S6P-encoding plasmid in aerosols and splatters generated during the dental procedure.ResultsAerosol splashing generated a localized pollution area extended up to 60 cm, with heightened contamination risks concentrated within a 30 cm radius. Significant differences in aerosol splash points and viral load by different turbine handpiece speeds under any cooling condition (P < 0.05) were detected. The highest level of aerosol splash points and viral load were observed when the handpiece speed was set at 40,000 rpm. Conversely, the lowest level of aerosol splash point and viral load were found at a handpiece speed of 10,000 rpm. Moreover, the aerosol splash points with higher viral load were more prominent in the positions of the operator and assistant compared to other positions. Additionally, the position of the operator exhibited the highest viral load among all positions.ConclusionsTo minimize the spread of aerosol and virus in clinics, dentists are supposed to adopt the minimal viable speed of a dental handpiece with limited cooling water during dental procedures. In addition, comprehensive personal protective equipment is necessary for both dental providers and dental assistants.

The BioCascade Impactor: A novel device for direct collection of size-fractionated bioaerosols into liquid medium.

The ability to collect size-fractionated airborne particles that contain viable bacteria and fungi directly into liquid medium while also maintaining their viability is critical for assessing exposure risks. In this study, we present the BioCascade impactor, a novel device designed to collect airborne particles into liquid based on their aerodynamic diameter in three sequential stages (>9.74 μm, 3.94-9.74 μm, and 1.38-3.94 μm when operated at 8.5 L/min). Aerosol samples containing microorganisms - either Saccharomyces kudriavzevii or Micrococcus luteus, were used to evaluate the performance of the BioCascade (BC) paired with either the VIable Virus Aerosol Sampler (VIVAS) or a gelatin filter (GF) as stage 4 to collect particles <1.38 μm. Stages 2 and 3 collected the largest fractions of viable S. kudriavzevii when paired with VIVAS (0.468) and GF (0.519), respectively. Stage 3 collected the largest fraction of viable M. luteus particles in both BC+VIVAS (0.791) and BC+GF (0.950) configurations. The distribution function of viable microorganisms was consistent with the size distributions measured by the Aerodynamic Particle Sizer. Testing with both bioaerosol species confirmed no internal loss and no re-aerosolization occurred within the BC. Irrespective of the bioaerosol tested, stages 1, 3 and 4 maintained ≥80% of viability, while stage 2 maintained only 37% and 73% of viable S. kudriavzevii and M. luteus, respectively. The low viability that occurred in stage 2 warrants further investigation. Our work shows that the BC can efficiently size-classify and collect bioaerosols without re-aerosolization and effectively maintain the viability of collected microorganisms.

Minimum Minutes Machine-Learning Microfluidic Microbe Monitoring Method (M7).

Frequent outbreaks of viral diseases have brought substantial negative impacts on society and the economy, and they are very difficult to detect, as the concentration of viral aerosols in the air is low and the composition is complex. The traditional detection method is manually collection and re-detection, being cumbersome and time-consuming. Here we propose a virus aerosol detection method based on microfluidic inertial separation and spectroscopic analysis technology to rapidly and accurately detect aerosol particles in the air. The microfluidic chip is designed based on the principles of inertial separation and laminar flow characteristics, resulting in an average separation efficiency of 95.99% for 2 μm particles. We build a microfluidic chip composite spectrometer detection platform to capture the spectral information on aerosol particles dynamically. By employing machine-learning techniques, we can accurately classify different types of aerosol particles. The entire experiment took less than 30 min as compared with hours by PCR detection. Furthermore, our model achieves an accuracy of 97.87% in identifying virus aerosols, which is comparable to the results obtained from PCR detection.

Bio-based ionic liquid filter with enhanced electrostatic attraction for outside filtration and inside collection of viral aerosols

Hazardous biological pathogens in the air pose a significant public environmental health concern as infected individuals emit virus-laden aerosols (VLAs) during routine respiratory activities. Mask-wearing is a key preventive measure, but conventional filtration methods face challenges, particularly in high humidity conditions, where electrostatic charge decline increases the risk of infection. This study introduces a bio-based air filter comprising glycine ionic liquids (GILs) and malleable polymer composite (GILP) with high polarity and functional group density, which are wrapped around a melamine-formaldehyde (MF) resin skeleton, forming a conductive, porous GIL functionized ionic network air filter (GILP@MF). When subjected to low voltage, the GILP@MF composite efficiently captures VLAs including nanoscale virus particles through the enhanced electrostatic attraction, especially in facing high humidity bioaerosols exhaled by human body. The filtration/collection efficiency and quality factor can reach 98.3% and 0.264 Pa−1 at 0.1 m s−1, respectively. This innovative filter provides effective VLA protection and offers potential for non-invasive respiratory virus sampling, advancing medical diagnosis efforts.

Ultraviolet Germicidal Irradiation Development Method for Transportation Disinfection Modelling

How do you continuously sanitise a coach/bus? Travelling on a coach during the COVID 19 pandemic was risky, and still is in some regions. There are many means of viral transfer: fomites, which is via contact after touching an infected surface; through direct droplet ballistics after a cough, and finally through aerosolization of the sputum into the air. Clean hands and masks reduce the former two. Mitigating viral load aerosol accumulation within the bus is of personal, commercial and societal interest. Done correctly, the passengers are safer; the transport organisation maintains hygienic business conditions and the society sees the viral spread reduction. Ultraviolet Germicidal Irradiation (UVGI) has been in use in operating theatres and water plants for over 100 years to reduce viral and bacterial load in the air and water. Valeo’s Thermal Commercial Vehicles (TCV) product group proposed, developed and now manufactures the most powerful coach/ bus UV Purifier module available. If the module is located within direct reach of the main air conditioning inlet, disinfected air is then delivered and entrained into the vehicle HVAC air delivery system. There it is cleanly distributed to the passengers and driver. During development two linked problems emerged:1. Where do you put the module(s) in retrofit?2. How do you keep the UV-C levels sufficiently high enough to kill the SARS Cov-2 virus but then low enough for continuous driver and passenger daily exposure?Computational Fluid Dynamics (CFD) provides the insight necessary to solve them. However, although high and low UV-C limits can be defined for the latter limit problem, devising a suitably representative model presented a novel challenge to Valeo TCV. This paper deals with the introduction of the radiation and viral field modelling into Valeo’s CFD toolset. Reformulating the InfraRed radiation model into essentially monochromatic UV-C band radiation, and with thoughtful design allowed us to develop a very high intensity virus killer that was also perfectly safe in the vehicle cabin. The modules are sold worldwide. Most importantly we use them daily on our team member transportation coaches to keep our employees safe to and from work at our production facilities.

Analysis of viral aerosol distribution characteristics in typical body positions of patients under local exhaust air

In this paper, CFD numerical simulation and experiment were used to simulate the diffusion process of human exhaled aerosol particles, and the influence of human lying down, sitting and standing posture on the diffusion of aerosol particles under local exhaust air conditions was studied. The results show that different body positions have significant effects on local exhaust air effect. Only 13.2% of the aerosol particles could be removed by local exhaust air in the lying state. The exclusion rate in sitting posture was 25.4%; The exclusion rate for standing posture was 20.6%. Local exhaust air alone is not enough to prevent infection. It is recommended to adopt the combination of mixed ventilation and local exhaust air, which may have a better effect on preventing cross infection, indoor particulate matter transmission and controlling pollution.

Intranasal mask for protecting the respiratory tract against viral aerosols

The spread of many infectious diseases relies on aerosol transmission to the respiratory tract. Here we design an intranasal mask comprising a positively-charged thermosensitive hydrogel and cell-derived micro-sized vesicles with a specific viral receptor. We show that the positively charged hydrogel intercepts negatively charged viral aerosols, while the viral receptor on vesicles mediates the entrapment of viruses for inactivation. We demonstrate that when displaying matched viral receptors, the intranasal masks protect the nasal cavity and lung of mice from either severe acute respiratory syndrome coronavirus 2 or influenza A virus. With computerized tomography images of human nasal cavity, we further conduct computational fluid dynamics simulation and three-dimensional printing of an anatomically accurate human nasal cavity, which is connected to human lung organoids to generate a human respiratory tract model. Both simulative and experimental results support the suitability of intranasal masks in humans, as the likelihood of viral respiratory infections induced by different variant strains is dramatically reduced.

High-volume evacuation mitigates viral aerosol spread in dental procedures

Dental healthcare personnel (DHCP) are subjected to microbe-containing aerosols and splatters in their everyday work. Safer work conditions must be developed to ensure the functioning of the healthcare system. By simulating dental procedures, we aimed to compare the virus-containing aerosol generation of four common dental instruments, and high-volume evacuation (HVE) in their mitigation. Moreover, we combined the detection of infectious viruses with RT-qPCR to form a fuller view of virus-containing aerosol spread in dental procedures. The air–water syringe produced the highest number of aerosols. HVE greatly reduced aerosol concentrations during procedures. The air–water syringe spread infectious virus-containing aerosols throughout the room, while other instruments only did so to close proximity. Additionally, infectious viruses were detected on the face shields of DHCP. Virus genomes were detected throughout the room with all instruments, indicating that more resilient viruses might remain infectious and pose a health hazard. HVE reduced the spread of both infectious viruses and viral genomes, however, it did not fully prevent them. We recommend meticulous use of HVE, a well-fitting mask and face shields in dental procedures. We advise particular caution when operating with the air–water syringe. Due to limited repetitions, this study should be considered a proof-of-concept report.

Marine viruses disperse bidirectionally along the natural water cycle

Marine viruses in seawater have frequently been studied, yet their dispersal from neuston ecosystems at the air-sea interface towards the atmosphere remains a knowledge gap. Here, we show that 6.2% of the studied virus population were shared between air-sea interface ecosystems and rainwater. Virus enrichment in the 1-mm thin surface microlayer and sea foams happened selectively, and variant analysis proved virus transfer to aerosols collected at ~2 m height above sea level and rain. Viruses detected in rain and these aerosols showed a significantly higher percent G/C base content compared to marine viruses. CRISPR spacer matches of marine prokaryotes to foreign viruses from rainwater prove regular virus-host encounters at the air-sea interface. Our findings on aerosolization, adaptations, and dispersal support transmission of viruses along the natural water cycle.

Influenza A and B Viruses in Fine Aerosols of Exhaled Breath Samples from Patients in Tropical Singapore.

Influenza is a highly contagious respiratory illness that commonly causes outbreaks among human communities. Details about the exact nature of the droplets produced by human respiratory activities such as breathing, and their potential to carry and transmit influenza A and B viruses is still not fully understood. The objective of our study was to characterize and quantify influenza viral shedding in exhaled aerosols from natural patient breath, and to determine their viral infectivity among participants in a university cohort in tropical Singapore. Using the Gesundheit-II exhaled breath sampling apparatus, samples of exhaled breath of two aerosol size fractions ("coarse" > 5 µm and "fine" ≤ 5 µm) were collected and analyzed from 31 study participants, i.e., 24 with influenza A (including H1N1 and H3N2 subtypes) and 7 with influenza B (including Victoria and Yamagata lineages). Influenza viral copy number was quantified using reverse transcription-quantitative polymerase chain reaction (RT-qPCR). Infectivity of influenza virus in the fine particle fraction was determined by culturing in Madin-Darby canine kidney cells. Exhaled influenza virus RNA generation rates ranged from 9 to 1.67 × 105 and 10 to 1.24 × 104 influenza virus RNA copies per minute for the fine and coarse aerosol fractions, respectively. Compared to the coarse aerosol fractions, influenza A and B viruses were detected more frequently in the fine aerosol fractions that harbored 12-fold higher viral loads. Culturable virus was recovered from the fine aerosol fractions from 9 of the 31 subjects (29%). These findings constitute additional evidence to reiterate the important role of fine aerosols in influenza transmission and provide a baseline range of influenza virus RNA generation rates.