Aerobic Environment Research Articles

The skeleton: an overlooked regulator of systemic glucose metabolism in cancer?

Recent discoveries demonstrated the skeleton’s role as an endocrine organ regulating whole-body glucose homeostasis. Glucose metabolism is critical for rapid cell proliferation and tumour growth through increasing glucose uptake and fermentation of glucose to lactate despite being in an aerobic environment. This hypothesis paper discusses emerging evidence on how bones can regulate whole-body glucose homeostasis with potential to impact on tumour growth and proliferation. Moreover, it proposes a clinical link between bone glucose metabolism and prognosis of cancer based on recent clinical trial data. Targeting metabolic pathways related with classic glucose metabolism and also bone metabolism, novel methods of cancer therapy and treatment could be developed. This paper objective is to highlight the need for future research on this altered metabolism with potential to change future management of cancer patients.

Mathematical Modeling and Simulation of 1,3-Propanediol Production by Klebsiella pneumoniae BLh-1 in a Batch Bioreactor Using Bayesian Statistics.

Mathematical modeling and computer simulation are fundamental for optimizing biotechnological processes, enabling cost reduction and scalability, thereby driving advancements in the bioindustry. In this work, mathematical modeling and estimation of fermentative kinetic parameters were carried out to produce 1,3-propanediol (1,3-PDO) from residual glycerol and Klebsiella pneumoniae BLh-1. The Markov chain Monte Carlo method, using the Metropolis-Hastings algorithm, was applied to experimental data from a batch bioreactor under aerobic and anaerobic conditions. Sensitivity analysis and parameter evolution studies were conducted. The root-mean-square error (rRMSE) was chosen as the validation and calibration metric for the developed mathematical model. The results indicated that the average tolerance of glycerol was 174.68 and 44.85 g L-1, the inhibitory products was 150.95 g L-1 for ethanol and 35.56 g L-1 for 1,3-PDO, and the maximum specific rate of cell growth was 0.189 and 0.275 h-1, for aerobic and anaerobic cultures, respectively. The model presented excellent fits in both crops, with rRMSE values between 0.09 - 33.74% and 3.58 - 31.82%, for the aerobic and anaerobic environment, respectively. With this, it was possible to evaluate and extract relevant information for a better understanding and control of the bioprocess.

Comparison and study of the corrosion differences of bronze alloys in oxygen-free and oxygen-containing conditions

The study on the initial corrosion of duplex bronze alloy by dissolved oxygen in Cl-containing environment showed that bronze alloy was preferentially passivated in aerobic environment, and then Cu selectively dissolved. The corrosion rate first slowed down and then gradually accelerated. In contrast, the oxygen-free environment accelerates the reaction of Cu-Cl and Sn-Cl, forms a Cl- rich layer on the metal surface. This layer promotes the formation of Sn chloride, thereby inducing the stratification of Cu-Sn products. In this process, the acidification of the solution causes the metal to enter a self-circulating corrosion mechanism, but the corrosion rate remains low.

Experimental Study on Microstructural Changes of Nanoaluminum Particles during the Slow Heating Process in Vacuum and Aerobic Environments

Experimental Study on Microstructural Changes of Nanoaluminum Particles during the Slow Heating Process in Vacuum and Aerobic Environments

Time-dependent corrosion behavior of EH36 steel caused by Pseudomonas aeruginosa based on big data monitoring technology

Marine microbial corrosion poses a significant threat to the safe service of marine engineering equipment. Previous studies have often failed to thoroughly analyze the continuous and prolonged microbial corrosion process, resulting in an incomplete understanding of microbial corrosion mechanisms involved at various stages and the development of ineffective control strategies. This study employed a corrosion big data online real-time monitoring technique to investigate the time-dependent corrosion behavior of EH36 steel caused by Pseudomonas aeruginosa in aerobic environments over a 30-d incubation period. It was found that P. aeruginosa accelerated the corrosion of EH36 steel in the early stages by enhancing the cathodic oxygen reduction process. As oxygen levels declined, P. aeruginosa transitioned from aerobic to anaerobic respiration, promoting corrosion through biocatalytic nitrate reduction. In the later stages, the reduction in sessile cell counts, extreme low oxygen concentration, and dense surface film increased the charge transfer and film resistances, ultimately leading to corrosion inhibition. The weight loss and electrochemical data confirmed the effectiveness of the big data monitoring technique in investigating microbial corrosion, which provides new approaches for diagnosing and preventing microbial corrosion.

Disintegration of commercial single-use plastics from synthetic and biobased origins and effects on plant growth

Many single–use plastic (SUP) options made of synthetic polymers, bio-based materials, and blends of both are available in the market and used in large quantities. The disintegration of eleven commercial SUP, marketed in Mexico as cups and plates, was investigated in an aerobic home compost environment at a laboratory scale over 180 days. An evaluation of chemical changes, surface morphology, and thermal and mechanical properties was conducted to ascertain the original composition of SUP and the progression of disintegration in samples that are challenging to clean from soil contamination. Furthermore, the impact of residual compost on barley (Hordeum vulgare) plant growth and its correlation with the leaching of heavy metals were explored. The bio-based SUP, but not those made of expanded polystyrene foam, showed a correlation between the disintegration degree (measured by weight loss into particles <2 mm) and a decrease in functional groups (observed by FT-IR), mechanical-thermal stability loss, and surface wear over disintegration time. For instance, the highest disintegration at 180 days was approximately 70% for wheat bran and palm leaf plates, followed by wheat plates and cellulose-PLA cups (60%). In addition to the components listed by the manufacturers, the FT-IR and DSC analysis revealed the presence of polyethylene and polypropylene in cellulose cups and sugarcane plates. These components, impede disintegration but contribute to preserving thermal resistance and hydrophobicity during utilization. Compost derived from expanded polystyrene foam SUP, with 90 days of disintegration, was rich in zinc and chromium and significantly decrease in the root length of the barley plant compared to the control. This demonstrates the necessity of considering the impact of the leaching of additives and secondary microplastics into the environment.

Lightweight, thermally insulating SiBCN/Al2O3 ceramic aerogel with enhanced high-temperature resistance and electromagnetic wave absorption performance

Owing to tunable dielectric properties, light weight and high porosity, polymer-derived SiBCN ceramic aerogels possess significant application prospects in electromagnetic wave (EMW) absorption and thermal insulation. However, due to inadequate oxidation resistance, the structural collapse and performance deterioration of SiBCN aerogels will easily occur in high-temperature aerobic environments, limiting their application. Herein, to address this issue, a novel and straightforward strategy based on typical polymer-derived-ceramic (PDC) aerogel method and impregnation with boehmite sol was proposed for synthesizing SiBCN/Al2O3 composite ceramic aerogels. The microstructure, phase composition, thermal insulation, oxidation resistance and EMW absorption properties of SiBCN/Al2O3 ceramic aerogels were investigated. The resulting SiBCN/Al2O3 composite aerogel demonstrates superior high-temperature structural stability, exhibiting an ultra-low linear shrinkage of only 6.5 % following heat treatment at 1200 °C for 2 h in air. Additionally, the composite aerogel shows a low thermal conductivity of 0.039 W/mK and a low density of 0.112 g/cm3. The SiBCN/Al2O3 composite aerogel, composed of dielectric SiBCN, conductive free carbon, and insulating alumina, demonstrates outstanding EMW absorption properties with a minimum reflection loss of −48.6 dB and an effective bandwidth of 5.8 GHz. The enhanced microwave absorption performance is mainly attributed to the improved impedance matching, multiple reflection, and enhanced interfacial polarization resulting from the introduction of Al2O3. Given prominent oxidation resistance, thermal insulation and EMW absorption properties, the SiBCN/Al2O3 composite aerogel paves the way for developing microwave absorption and thermal insulation integrated material in high-speed vehicles.

New insights into thallium(I) behaviors at birnessite surfaces: Effects of an organic buffer and goethite

Understanding the environmental behavior of thallium (Tl) is crucial due to its high toxicity and increasing anthropogenic presence. This study investigated the adsorption and redox behaviors of Tl(I) with acid birnessite (AcBi) in the presence of 1,4-piperazine-diethanesulfonic acid (PIPES) and goethite under diffusion-limited conditions using Donnan reactors in aerobic and anaerobic environments. Our findings indicate that Tl(I) preferentially adsorbs onto AcBi, with capacities 20 to 100 times higher than onto goethite, even when AcBi is partial reduced by PIPES. No net Tl(I) oxidation occurred in the Donnan reactors, likely due to complex electron transfer processes between Tl(I), birnessite, and PIPES. Any Tl(III) generated from Tl(I) oxidation by birnessite was rapidly reduced back to Tl(I) by PIPES. This was confirmed in batch experiments where reduced Tl(III) on birnessite surfaces and in Tl(III) salts. These findings highlight the need to assess the impact of Good's buffers on redox reactions involving manganese oxides and Tl, while also providing insights into the competitive retention of Tl on manganese and iron (hydr)oxides, with implications for Tl mobility and bioavailability in natural environments.

Metal-Free CO Prodrugs Activated by Molecular Oxygen Protect against Doxorubicin-Induced Cardiomyopathy in Mice.

Carbon monoxide has been extensively studied for its various therapeutic activities in cell cultures and animal models. Great efforts have been made to develop noninhalational approaches for easy and controlled CO delivery. Herein, we introduce a novel metal-free CO prodrug approach that releases CO under near-physiological conditions. CO from the quinone-derived CO prodrugs is initiated by general acid/base-catalyzed tautomerization followed by oxidation by molecular oxygen to form the key norbornadienone intermediate, leading to cheletropic CO release only in an aerobic environment. Representative CO prodrug analog QCO-105 showed marked anti-inflammatory effects and HO-1 induction activity in RAW264.7 macrophages. In a mouse model of doxorubicin-induced cardiomyopathy, we show for the first time that the CO prodrug QCO-105 prevented cardiomyocyte injury, consistent with the known organ-protective effects of HO-1 and CO. Overall, such a new CO prodrug design serves as the starting point for developing CO-based therapy in attenuating the cardiotoxicity of doxorubicin.

Diversity and ecology of microbial sulfur metabolism.

Sulfur plays a pivotal role in interactions within the atmosphere, lithosphere, pedosphere, hydrosphere and biosphere, and the functioning of living organisms. In the Earth's crust, mantle, and atmosphere, sulfur undergoes geochemical transformations due to natural and anthropogenic factors. In the biosphere, sulfur participates in the formation of amino acids, proteins, coenzymes and vitamins. Microorganisms in the biosphere are crucial for cycling sulfur compounds through oxidation, reduction and disproportionation reactions, facilitating their bioassimilation and energy generation. Microbial sulfur metabolism is abundant in both aerobic and anaerobic environments and is interconnected with biogeochemical cycles of important elements such as carbon, nitrogen and iron. Through metabolism, competition or cooperation, microorganisms metabolizing sulfur can drive the consumption of organic carbon, loss of fixed nitrogen and production of climate-active gases. Given the increasing significance of sulfur metabolism in environmental alteration and the intricate involvement of microorganisms in sulfur dynamics, a timely re-evaluation of the sulfur cycle is imperative. This Review explores our understanding of microbial sulfur metabolism, primarily focusing on the transformations of inorganic sulfur. We comprehensively overview the sulfur cycle in the face of rapidly changing ecosystems on Earth, highlighting the importance of microbially-mediated sulfur transformation reactions across different environments, ecosystems and microbiomes.

Effect of aeration pretreatment on anaerobic digestion of swine manure

ABSTRACT To investigate the effects of aeration pretreatment on the anaerobic digestion (AD) of swine manure, five pretreatment groups were established with dissolved oxygen (DO) in each group set to 0.0, 0.4, 0.8, 1.4, and 2.0 mg/L, respectively. The results demonstrated that compared to the non-aeration group, methane production increased to varying degrees with different aeration pretreatments (AP), with a maximum increase of 27.98% (DO = 2.0 mg/L). AP reduced the hydrogen sulfide (H2S) content of biogas. The H2S concentration in the DO = 2.0 mg/L was only 0.209%, and this represented an increased H2S removal rate of 49.27% compared to that of the DO = 0.0 mg/L (0.412%). Simultaneously, AP increases the hydrolysis rate. When the DO concentration reached 2.0 mg/L, the hydrolysis rate reached its maximum. An increase in the hydrolysis rate further enhanced the removal rate of organic matter. The organic matter removal rate was highest (36.96%) at DO = 2.0 mg/L. AP effectively prolonged the methane generation time and shortened the lag time of methane generation. AP creates a brief micro aerobic environment, accelerates substrate hydrolysis, and promotes the production and consumption of total volatile fatty acids, particularly acetic acid. Additionally, AP promoted the symbiotic relationship between Caldicoprobacter (20.93%–34.96%) and Metanosaeta (14.73%–18.45%).

High stability and reactivity of porous calcium tartrate supported nano zero-valent iron in aerobic environment and alkaline wastewater

Nano zero-valent iron (nZVI) has remarkable reactivity, but its practical application is severely hindered by its easy aggregation and rapid oxidation after exposure in air. In this study, spherical porous calcium tartrate (CaTr) was synthesized with ultrasound technology and used to support nZVI. It was found that the as-obtained nZVI@CaTr was highly stable and reactive in oxygen-rich water under neutral/alkaline conditions. In the pH range of 4–9, the degradation efficiency of p-nitrophenol (PNP, 50 mg/L) by nZVI@CaTr7 exceeded 98.1 %. Importantly, nZVI@CaTr could be stored in air for a long time without inert gas protection. After 60 days and 120 days of air exposure, the removal efficiency of PNP still reached 83.3 % and 63.3 %, which was 2.8 and 9.7 times that of bare nZVI, respectively. Such an excellent performance could be attributed to two reasons: (i) spherical CaTr effectively inhibited the oxidation and aggregation of nZVI by favorable interactions with nZVI, and (ii) the abundant functional groups on the surface of CaTr acted as electronic mediators to significantly promote charge transfer between nZVI (electron donor) and PNP (electron acceptor). Therefore, cheap, air stable and highly effective nZVI@CaTr7 provided a potential application prospect for the degradation of environmental pollutants in aerobic environment and alkaline wastewater.

Potential Growth of Anammox Bacteria under Aerobic Conditions.

Anammox bacteria are obligate anaerobic bacteria that exist widely in nature with sufficient amounts of dissolved oxygen. However, whether anammox bacteria can grow under aerobic conditions remains unclear. In this study, we found that the production of nitrate in the anammox system under aerobic conditions was significantly higher than that under anaerobic conditions without total nitrogen loss. Anammox bacteria can grow by oxidizing nitrite and dehydrogenating hydrazine to produce electrons for carbon fixation. The hydrazine dehydrogenase in anammox bacteria was inhibited under aerobic conditions, and the nitrite oxidoreductase transcription expression of anammox bacteria increased by 2.7 times compared to that under anaerobic conditions, which was the main way for anammox bacteria perform carbon fixation. DNA-stable isotope probing with 13C bicarbonate found the existence of anammox bacteria with 13C isotopes in aerobic cultivation, further proving that anammox bacteria can grow under aerobic condition. More than half of the pathways in glycolysis, the Wood-Ljungdahl pathway, and the tricarboxylic acid cycle were upregulated in anammox bacteria in aerobic condition. Large amounts of bacterioferritins are the important antioxidative enzymes in anammox bacteria in the aerobic environment, which contributes to their stronger oxygen adaptation than other anaerobes. This study expands our understanding of the growth mechanism of anammox bacteria as well as the oxygen adaptation strategies of obligate anaerobic bacteria.

The Degradation and Migration of Cyclanilide in Soil and Sediment in China.

The environmental fate of a plant growth regulator cyclanilide was studied in this paper. The degradation, adsorption, and migration behaviors of cyclanilide were detailly measured in the laboratory. The results showed that the DT50 of cyclanilide degradation in the Jiangxi red, Taihu paddy, Changshu wushan, Shaanxi tide, and Dongbei black soils was 42.3 d, 31.9 d, 14.4 d, 30.4 d as well as 27.4 d under aerobic conditions and 32.3 d, 37.4 d, 29.3 d, 48.9 d as well as 27.0 d under water anaerobic conditions, respectively, with the main metabolite being 2,4-dichloroaniline (2,4-D). The DT50 of 2,4-D ranged from 5.26 to 27.1 days under aerobic conditions, and from 10.6 to 54.1 days under anaerobic conditions. The adsorption of cyclanilide by the soils was well fitted by the empirical linear adsorption isotherm, and the adsorption constant (Kd, H) values in the Jiangxi red, Taihu paddy, Changshu wushan, Shaanxi tide, and Dongbei black soils were 7.08, 4.49, 4.05, 3.20, and 1.41, respectively. The results of a mobility test showed that cyclanilide had strong mobility in the most test soils. Furthermore, soil pH is the dominant element affecting the adsorption of cyclanilide in the soils. Under aerobic environment, the DT50 of total cyclanilide in river and lake water-sediment systems were 30.7 d and 34.0 d, respectively; under anaerobic environment, their DT50 were 30.8 d and 31.4 d, respectively. In water-sediment systems, 2,4-D mainly exists in aqueous phase and the DT50 ranged from 5.23 to 8.76 days. This work demonstrated that cyclanilide has the potential risk to contaminate environment and attention should be paid to its application.

Hydrogen Generated by Electrochemical Water Splitting as Electron Donor for Nitrate Removal from Micro-Polluted Reservoir Water

Extremely limited organic carbon sources and aerobic environment in micro-polluted reservoir water make conventional denitrification exceptionally challenging. As a result, total nitrogen (TN) concentration in most reservoir waters exceeds standard value year-round. In this study, for the first time, we constructed a mini water-lifting and aeration system (mini-WLAS) to remove nitrate in actual reservoir water. In the mini-WLAS, H2 was produced through electrolysis of reservoir water without adding any electrolyte, and the ascending water flow carried the generated H2 from lower layer to upper bacteria layer. The maximum denitrification rate reached 0.29mg (L·d)-1 under dissolved oxygen (DO) concentration of 6-8mgL-1, 6.04 times higher than that of the control group. There is almost no accumulation of NH4+-N, NO2--N, and N2O, and the concentration of CODMn decreased by 55.2%. More importantly, the pH stayed near-neutral steadily throughout the whole process. Microbial community analysis showed that the abundances of hydrogenotrophic denitrifying bacteria (HDB) were 2 orders higher than those in the control system. Some HDB could work under aerobic conditions, providing an explanation for the excellent denitrification performance under high DO. This study provides a novel perspective for TN removal from reservoir water.

Studies of Wastewater Management through Microbiology of Constructed Wetland

Constructed wetlands are distinguished by certain environmental factors that let many physical and biological processes to occur simultaneously. This is the outcome of a particular habitat that supports the development of microbes and hydrophytes, which are plants that can live in aquatic and semiaquatic environments and are capable of anaerobic, anaerobic, and aerobic environments. Their combined activity amplifies the processes of oxidation and reduction, which are in charge of eliminating and holding onto contaminants. Sorption, sedimentation, and absorption all aid in these processes. Treatment wetland systems have been employed in community management for more than 50 years because of these benefits. Constructed wetlands are becoming more and more popular for treating or pre-treating many kinds of industrial wastewater because of their benefits, cheap operating costs, and high removal efficiency. The paper examines how these facilities are being used worldwide to treat industrial wastewater. With a focus on particular and distinctive pollutants from industries, the conditions of usage and efficacy of pollutants removal from wastewater that degrades quickly and slowly were described. The article addressed the use of subsurface horizontal flow beds for the treatment of wastewater from various industrial processes, including the manufacturing of paper, oil, and coffee, as well as the food sector, which includes wineries and distilleries. Constructed wetlands are used in Poland to treat wastewater and milk processing sludge on a pilot size or to dewater sewage sludge generated in municipal wastewater treatment plants that handle household sewage with around 40% of wastewater from the dairy and fish industries. Constructed wetlands provide the so-called ecosystem function in addition to an adequate degree of treatment in every instance.

Aerobic Fe transformation induced decrease in the adsorption and enhancement in the reduction of Cr(VI) by humic acid-ferric iron coprecipitates

Humic substance (HS)-ferric iron (Fe(III)) coprecipitates are widespread organo-mineral associations in soils and aquifers and have the capacity to immobilize and detoxify Cr(VI). These coprecipitates undergo transformation owing to their thermodynamic instability; however, the effects of this transformation on their environmental behaviors remain unclear, particularly in aerobic environments. In this study, the aerobic transformation of humic acid (HA)-Fe(III) coprecipitates, a representative of HS-Fe(III) coprecipitates, was simulated. The environmental effect was then evaluated after conducting an adsorption–reduction batch experiment toward Cr(VI). The aerobic transformation characteristics, as well as the adsorption/reduction capacity of HA-Fe(III) coprecipitates, were found to depend strongly on their structures. In ferrihydrite (Fh)-like coprecipitates, amorphous Fh is readily transformed into crystalline hematite and goethite at aerobic environments, leading to a much lower specific surface area and adsorption capacity. However, this increasing degree of crystallization enhanced the inductive reduction ability towards Cr(VI) owing to the more significant shift of electron pairs in the FeOC bond toward the HA direction. In HS-like coprecipitates, Fe(III) always serves as a cation bridge connecting HA molecules, but can be reduced to Fe(II) by the associated HA after aerobic transformation. The produced Fe(II), therefore, drove the reduction of the adsorbed Cr(VI). These findings emphasize the pivotal role of aerobic transformation in enhancing the reduction capacity for Cr(VI), which opens a new avenue for the development of in-situ remediation agents for Cr(VI)-contaminated sites.

Molecular characteristics and antimicrobial resistance profiles of Staphylococcus aureus isolates from burns.

Burns are a problem that affects millions of individuals around the world. This research aimed to analyze the genetic characteristics and antibiotic resistance of Staphylococcus aureus strains isolated from patients with burns. Identifying the genetic variations of three local strains of Staphylococcus aureus isolated from burns. Swab samples were collected from eighty sources (burns). Using sterile swabs containing media collected from patients treated at Baqubah Teaching Hospital between July 2022 and the end of September 2022, these samples were then cultured on blood agar and brain heart infusion agar. A total of twenty-four hours were spent incubating the cultured samples in an aerobic environment at 37°C. During this time, isolated growing colonies showed characteristic growth, color, and hemolysis, while suspicious colonies were cultured for further identification. Our results indicated the presence of several polymorphisms that were distributed in the investigated samples. However, almost all observed variations were concentrated only in the S2 isolates. The construction of phylogenetic trees confirmed this notion by positioning these S2-based amplicons to distinct categories within Staph. aureus organisms. Furthermore, the phylogenetic tree offered additional tools for the guaranteed identity of the samples that were analyzed. Consequently, the utilization of the PCR-sequencing approach in three DNA samples belonging to these local bacterial isolates has resulted in the confirmation of the identity of this strain. However, particular emphasis should be placed on S2 isolate as it has special variants that differ from its mates, in terms of its metabolic as well as phylogenetic consequences. Therefore, S2 isolates may represent a new strain that requires a whole genome sequencing strategy to validate its identity within Staph. aureus organisms. S.aureus resistance was 100% (Augmentin and Tetracycline), and 90% (Azithromycin and Trimethoprim), while Cefotaxime and Chloramphenicol recorded (75%, and 85%) respectively.

Key genomes, transcriptomes, proteins, and metabolic factors involved in the detoxification/tolerance of TNT and its intermediates by bacteria in anaerobic/aerobic environments

Novel microbial strains capable of efficient degradation of TNT and typical intermediates (2-ADNT and 4-ADNT) in aerobic/anaerobic environment were screened and isolated from ammunition-contaminated sites. The key genomes, transcriptomes, proteins, and metabolic factors for microbial detoxification/tolerance to pollutants in anaerobic and aerobic environments were analyzed for the first time. The bacterial genome, which is rich in metabolism and environmental information-processing functional genes, provides transcriptional and translational-related proteins for detoxifying/tolerating pollutants. At the transcriptional level, bacteria significantly expressed genes related to inositol phosphate metabolism for regulating membrane transport, maintaining the cytoskeleton, and signal transduction. At the protein level, genes involved in antioxidation, fat metabolism, sugar synthesis/degradation, and pyruvate metabolism were significantly expressed. At the metabolic level, riboflavin metabolism, which regulates membrane integrity, protects against oxidative stress, and maintains the sugar–protein–fat balance, showed significant responses. Bacteria simultaneously regulate amino acid metabolism, carbohydrate metabolism, and N/P/S cycles to maintain homeostatic cellular energy supplies. The key pathway for pollutant degradation in bacteria is nitrotoluene degradation. The molecular mechanism of bacterial tolerance to pollutants involves the regulation of oxidative phosphorylation and basic cycle pathways to maintain gene transcription, protein translation, and metabolic cycles.

Understanding the Degradation Mechanism for NiMo Composite and Effect of Ionomer on the Activity Towards HER

Hydrogen is an essential commodity for achieving cleaner and greener energy.1,2 Due to its high gravimetric energy density, hydrogen is favored as a carbon-neutral fuel.2,3 Moreover, the electrochemical accessibility of hydrogen evolution and oxidation reactions enable hydrogen to be used as a reversible fuel, as in hydrogen battery anodes and unitized reversible fuel cells.4,5 Platinum group metals (PGMs) are excellent catalyst for hydrogen chemistry, as they exhibit negligible activation barrier for HER and HOR, but they are costly and the upstream processes for mining and purification are unsustainable.6 A promising alternative to PGM catalysts would be nonprecious transition metal alloys/composites in form of nanoparticles. These materials are more readily available and lower in cost. Nonetheless, non-precious catalysts developed to date have never met the benchmarks set by PGMs in terms of catalytic activity and stability.Our lab is continuing a long-running effort to develop and improve nickel-molybdenum (Ni–Mo) composites, which stand as one of the strongest candidates for non-PGM HER and the HOR. In prior work, we developed a method to synthesize Ni–Mo nanoparticles supported on oxidized carbon, which increases catalyst dispersion and significantly reduces losses due to interfacial resistivity.7 The catalyst composite has a core@shell structure, where in the core is mainly nickel-rich alloy and the shell is primarily molybdenum-rich oxide.Furthermore, DFT calculations suggest the addition of Mo in the catalyst subsurface weakens hydrogen binding to surface Ni sites, thus increasing the overall activity toward HER/HOR.8 In ongoing work to further develop Ni–Mo/C composites, we are focusing on catalyst degradation under storage and operating conditions. To examine catalyst durability upon extended storage, we measured activity toward hydrogen evolution progressively for a single batch of catalyst powdered retained at room temperature in an aerobic environment over 850 hours. We observed a monotonic decrease in catalytic activity culminating in a >90% decrease in activity. Post-mortem analysis via XRD showed the increased peak intensities corresponding to NiO and MoO3. We further observed that the catalyst remains active over extended periods when stored under a dry, oxygen-free atmosphere. Finally, exposing the degraded catalyst to thermal reduction increased catalytic activity. Together, these results strongly suggest aerobic oxidation as the primary degradation mechanism under shelf-storage, with straightforward mitigations steps readily available by excluding air and water. This finding further suggests that oxide component of the synthesized catalyst is not an active site for hydrogen chemistry, although we speculate that some surface oxide is beneficial for enhancing the rate of water dissociation.9 We also studied the impact of the ionomer chemistry on the catalytic activity of Ni–Mo composites for alkaline anion exchange membrane (AEM) electrolyzer applications. Surprisingly, we observed an ~80% reduction in catalytic activity for Ni–Mo composites formulated into thin film HER catalysts using poly(aryl piperidinium) (PAP) carbonate AEM ionomers relative to control samples based on Na-exchanged Nafion ionomer binders. Further work showed this result was specific to the carbonate form of the ionomer, as HER activity was fully recovered when we used halide forms of the PAP ionomer. Work is ongoing to establish the physicochemical basis of this poisoning effect.Based on these findings, we developed functional AEM electrolyzer assemblies with IrOx anodes and Ni–Mo/C cathodes, where the cathode composition was formulated based on our best results from RDE studies. These MEAs yielded electrolyzer performance properties that were indistinguishable from MEAs we tested using Pt–Ru/C cathodes that were otherwise identical in composition.8 This leads us to conclude that advanced Ni–Mo/C catalyst composites can indeed achieve performance parity with PGM catalysts on the basis of initial catalytic activity, whereas significant work remains to characterize durability under extended operating conditions.