Aerial Application Research Articles

Honey bee death from aerosols inadvertently produced from propelled aerial dispersal of a solid ant bait.

Hydrogels are a new bait form, and multiple studies have found minimal potential or actual nontarget impacts associated with their use. However, in 2020, aerial applications of hydrogels containing fipronil unequivocally resulted in honey bee deaths. Here we detail four studies that then were conducted to determine how the bees were exposed to the active constituent and how to modify the aerial treatment protocols to eliminate the risk to bees. The first trial confirmed the existence of fipronil in aerosol form. The second trial quantified that in specific wind conditions the aerosols were falling to the ground at a maximum distance determined by an approximate 30° angle from the ground to the dispersal point, and that free-falling hydrogels either do not produce aerosols or, if so, at volumes too negligible to be collected or quantified. The third trial confirmed that even bee hives upwind and several hundreds of metres away from the area being baited can be contaminated by the aerosols. The fourth trial found no bee hive mortality as a result of either free-falling bait or moving bee hives 500 m beyond the treatment area. The aerosol issue is likely to occur with every motorized mechanism dispersing hydrogels. It is possible that the same issue happens with solid dry products if they produce a fine dust when propelled during dispersal. Further research into this issue is warranted. © 2022 The Authors. Pest Management Science published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Response of cavity nesting birds to Lymantria dispar (Lepidoptera) and aerial spraying – An experimental approach

Eruptive population dynamics of forest insect species regularly attract the interest of ecologists but also often evoke debates among stakeholders concerning impacts that outbreaks or pest control activities have on forest communities including insectivorous birds. Lymantria dispar is the most serious native defoliator in mixed oak-broadleaf forests in Central Europe. To investigate the treatment effects of L. dispar density, aerial application of the insecticide Mimic (tebufenozide) and nest box accessibility for L. dispar caterpillars on nest box success of cavity nesting birds, we deployed 352 nest boxes in a full factorial experimental design with 11 replicates. L. dispar density was predicted by egg mass counts made in the year before the study. The accessibility of nest boxes for L. dispar caterpillars was manipulated in all study sites by placing nest boxes on trunks for easy access to caterpillars and on branches for more difficult access. Successful nest boxes (binary metric that combines failed breeding attempt and empty nest box) and nest productivity (number of fledged chicks in successful boxes) were monitored in the peak year of a L. dispar outbreak, during which half of the plots were treated with Mimic, as well as in the following year when L. dispar populations had widely collapsed, and no further treatments were applied. L. dispar and non-target caterpillar biomass was sampled by canopy fogging to quantify prey abundance. Caterpillar biomass was significantly reduced by Mimic in the treatment year and remained low in the post-treatment year. Despite the reduction of caterpillars, our zero-inflation model found no effect of any tested variables on nest box success of the early brood. However, in the late broods the number of successful nest boxes was reduced in Mimic treated plots in the first year by 42%, while unaffected by initial L. dispar density. The number of successful nest boxes in the second year was lower in areas with initially high L. dispar densities and there was a marginal carry-over effect of insecticide treatment. L. dispar caterpillars entered nest boxes on the trunk in higher numbers than boxes on the branch, but nest box position had no effect on nest box success of birds.We conclude that despite its strong negative impact on caterpillar prey, aerial application of Mimic targeting L. dispar caused an increase in the number of failed boxes in late broods in sprayed plots, particularly in the year of application and to some extent in the year after. We presume this delayed effect of Mimic only on late broods to be caused by Mimic-induced caterpillar shortages during first broods leading to an increased parental effort and a subsequent reduced number of second broods. The generally limited impact of Mimic might be explained by the overall extensive availability of alternate prey in oak forests in May during first broods and the ability of tits to increase their parental effort in times of caterpillar shortage. In unsprayed sites, L. dispar densities can create legacies of impact in following years, but caterpillars do not directly affect birds nest box success despite entering cavities.

A lightweight noise-tolerant encryption scheme for secure communication: An unmanned aerial vehicle application.

In the modern era, researchers have focused a great deal of effort on multimedia security and fast processing to address computational processing time difficulties. Due to limited battery capacity and storage, Unmanned Aerial Vehicles (UAVs) must use energy-efficient processing. In order to overcome the vulnerability of time inefficiency and provide an appropriate degree of security for digital images, this paper proposes a new encryption system based on the bit-plane extraction method, chaos theory, and Discrete Wavelet Transform (DWT). Using confusion and diffusion processes, chaos theory is used to modify image pixels. In contrast, bit-plane extraction and DWT are employed to reduce the processing time required for encryption. Multiple cyberattack analysis, including noise and cropping attacks, are performed by adding random noise to the ciphertext image in order to determine the proposed encryption scheme’s resistance to such attacks. In addition, a variety of statistical security analyses, including entropy, contrast, energy, correlation, peak signal-to-noise ratio (PSNR), and mean square error (MSE), are performed to evaluate the security of the proposed encryption system. Moreover, a comparison is made between the statistical security analysis of the proposed encryption scheme and the existing work to demonstrate that the suggested encryption scheme is better to the existing ones.

Effect of aerial application of adjuvants on pepper defoliant droplet deposition and efficacy of defoliation sprayed by unmanned aerial vehicles.

Defoliant spraying is an important aspect of the mechanized processing of pepper harvesting. Complete and uniform spraying of defoliant could improve the quality of defoliation and reduce the impurity content in processing pepper. In this study, we assessed the effect of aerial spraying of adjuvants on physicochemical properties of defoliant solution and droplet deposition when using an unmanned aerial vehicle (UAV) for defoliation spraying. The results showed that Puliwang was a better aerial spray adjuvant suitable for spraying defoliants for processing pepper using UAVs, with a higher defoliation rate and better droplet deposition. Although the YS-20 adjuvant had a higher droplet deposition amount (0.72 μg/cm2) in the middle layer, its performance was poor in droplet size, density, and coverage. The size and density of the droplets added with the Manniu were basically the same as the Puliwang, even the distribution uniformity was better (the CV of the upper canopy layer was only 33.6%), but the coverage rate was poor. In the treatment with AS-901N, there was no marked increase in droplet size, so evaporation and drift were not improved, eventually resulting in a lower defoliation rate. Puliwang had the highest comprehensive score, followed by AS-910N, YS-20, and Manniu.

Insecticidal Management of Rangeland Grasshoppers Using a Remotely Piloted Aerial Application System

Grasshoppers are integral parts of rangeland ecosystems but also have the potential to reach population densities high enough (outbreaks) to cause serious economic damage from forage loss and affect adjacent crops. The objective of this study was to investigate the efficacy of treating grasshopper population hotspots with a liquid insecticide using a remotely piloted aerial application system (RPAAS), as opposed to fixed-wing aircraft, which is the most common method currently in use. A liquid insecticide, Sevin XLR PLUS (containing carbaryl), was applied on replicated 4.05-hectare (10-acre) plots with an RPAAS on a ranch in New Mexico. Our results demonstrated that Sevin XLR PLUS significantly suppressed grasshopper populations over a 14-day period (normalized population reduction was 79.11 ± 8.35% SEM) and quite rapidly (mostly by day 3) compared to untreated controls. These results are comparable to those achieved with fixed-wing aircraft. The RPAAS covered the whole test area in a single flight in approximately 5 min, making these population hotspot treatment applications relatively rapid, potentially more cost-effective, and more targeted in comparison to fixed-wing aircraft. Before adoption as an application method option, further research is recommended on using an RPAAS to cover larger areas in combination with using diflubenzuron-based insecticides, which are often preferred.

Visual Servoing Approach to Autonomous UAV Landing on a Moving Vehicle.

Many aerial robotic applications require the ability to land on moving platforms, such as delivery trucks and marine research boats. We present a method to autonomously land an Unmanned Aerial Vehicle on a moving vehicle. A visual servoing controller approaches the ground vehicle using velocity commands calculated directly in image space. The control laws generate velocity commands in all three dimensions, eliminating the need for a separate height controller. The method has shown the ability to approach and land on the moving deck in simulation, indoor and outdoor environments, and compared to the other available methods, it has provided the fastest landing approach. Unlike many existing methods for landing on fast-moving platforms, this method does not rely on additional external setups, such as RTK, motion capture system, ground station, offboard processing, or communication with the vehicle, and it requires only the minimal set of hardware and localization sensors. The videos and source codes are also provided.

Stress Investigation of Aluminium Alloy and Composite Material for Unmanned Aerial Vehicle Application via Simulation Analysis

Composite material offers excellent properties such as lightweight, high strength toweight ratios, and excellent corrosion resistance. Universiti Tun Hussein Onn Malaysia successfully developed a Cargo Drone (C-Drone) using aluminium alloy as its structure. The future enhancement is looking at the potential of composite material for C-Drone application. Therefore, this research aims to study the stress properties of aluminium alloy and glass fibre composite for C-Drone application via simulation analysis. The scope of this study focuses on the landing gear part of the C-Drone. The drawingof C-Drone was analysed through SolidWorks software to obtain the result of the material reacting to stress, strain, and displacement. The result shows that glass fibre with brittle properties can withstand a high amount of stress, acceptable strain rate,acceptable deformation and reduced weight up to 10% compared to aluminium alloy. This research proves that composite material such as glass fibre reinforced plastic can become an alternative to the current aluminium alloy 6061-T6.

Unmanned Aerial Vehicle Application in Mining User case in Rwanda

Drones have piqued the interest of the mining industry, which has expressed a strong interest in the usage of UAVs/drones for regular tasks Unmanned Aerial Vehicles(UAVs)/drones, sometimes known as Micro Air Vehicles (MAVs), are mostly drones that are used for a number of commercial and military applications, including surveillance and reconnaissance. These unmanned aerial vehicles (UAVs)/drones are capable of transporting of a wide range sensors depending on the nature of their missions, including acoustic, optical, biochemical, and bio sensors. In order to improve the performance and efficiency of drones/UAV, researchers have concentrated on the design optimization of drones, which has resulted in the creation and construction of a variety of Aerial Vehicles/drones with diverse abilities and capabilities. As a consequence, previous research as well as information from firms that supply drones for the mining industry are being explored further. An investigation of the application of drone/UAVs in surface and subsurface mines is presented in this research. The usage of drones/UAVs in abandoned mines, both on the surface and below, is also discussed. It also includes a thorough discussion of the instruments or sensors that are frequently used in mining drones. In this paper/article, we address the difficulties linked with the usage of drones technologies in underground mines, as well as potential solutions to these difficulties.

The effects of brodifacoum cereal bait pellets on early life stages of the rice coral Montipora capitata.

Midway Atoll in the Northwestern Hawaiian Islands is home to ground nesting birds that are threatened by invasive mice. Planned rodent eradication efforts for the island involve aerial application of cereal bait pellets containing the chemical rodenticide brodifacoum. Given the nature of the application method, drift of cereal bait pellets into the coastal waters surrounding Midway Atoll is unavoidable. To understand whether cereal bait pellets impact marine invertebrates, gametes and larvae of the reef-building coral Montipora capitata were exposed to brodifacoum, cereal bait pellets containing brodifacoum, and inert cereal bait pellets without the rodenticide. Fertilization success and larval survival were assessed at nominal brodifacoum concentrations of 1, 10, and 100 ppb. Fertilization success decreased by 15% after exposure to 100 ppb brodifacoum solutions. Larval survival was not reduced by exposure to brodifacoum solutions. Cereal bait pellets containing brodifacoum reduced fertilization success at 10 ppb brodifacoum in 0.4 g per L pellet solutions by 34.84%, and inhibited fertilization at 100 ppb brodifacoum in 4 g of pellet per L solution. Inert cereal bait pellets had similar effects, reducing fertilization success at 0.4 g of pellet per L by 40.50%, and inhibiting fertilization at 4 g per L pellet solutions. Larval survival was reduced by >43% after prolonged exposure to 4 g per L pellet solutions. The highest concentration used in this study was meant to represent an extreme and unlikely condition resulting from an accidental spill. Our findings indicate large amounts of cereal bait pellets entering the coastal environment of Midway Atoll, if occurring during a coral spawning event, would reduce coral reproduction by decreasing fertilization success. It is difficult to know the ecologically relevant concentrations of cereal bait pellets in coastal environments due to unavoidable bait drift after land applications, but results indicate small amounts of pellet drifting into coastal environments would not severely reduce coral reproductive capacity. Best management practices should consider known coral reproductive periods when scheduling applications of pellets on tropical islands to reduce the risk of negative impacts of large-scale accidents on corals.

Payload Capacities of Remotely Piloted Aerial Application Systems Affect Spray Pattern and Effective Swath

Production agriculture has recently witnessed exponential growth in the use of UAS technology to obtain site-specific, real-time spectral reflectance data for the management of spatial and temporal variability in agricultural ecosystems. The integration of this novel technology and remotely piloted aerial application systems (RPAASs) for pest management requires data curation on spray pattern uniformity, droplet distribution and the operational factors governing such data. The effects of application height and ground speed on spray pattern uniformity and droplet spectra characteristics for four commercially available RPAAS platforms configured with four different payload capacities (5, 10, 15 and 20 L) and factory-supplied nozzles were investigated. Spray pattern was determined by a cotton string deposition analysis system. Spray droplets captured on water-sensitive paper cards were analyzed using a computer-based scanner system. The test results indicated that each RPAAS platform of varying payload capacity was able to produce an acceptable spray pattern. As the payload capacity increased, so did the effective swath. However, the effective swath was comparable between 15 and 20 L units. The theoretical spray application rate decreased with ground speed. The fundamental data reported here may provide guidance to aerial applicators and help in the furtherance of RPAASs as an effective pest management tool.

Drones for Area-Wide Larval Source Management of Malaria Mosquitoes

Given the stagnating progress in the fight against malaria, there is an urgent need for area-wide integrated vector management strategies to complement existing intra-domiciliary tools, i.e., insecticide-treated bednets and indoor residual spraying. In this study, we describe a pilot trial using drones for aerial application of Aquatain Mosquito Formulation (AMF), a monomolecular surface film with larvicidal activity, against the African malaria mosquito Anopheles arabiensis in an irrigated rice agro-ecosystem in Unguja island, Zanzibar, Tanzania. Nine rice paddies were randomly assigned to three treatments: (a) control (drone spraying with water only), (b) drone spraying with 1 mL/m2, or (c) drone spraying with 5 mL/m2 of AMF. Compared to control paddies, AMF treatments resulted in highly significant (p < 0.001) reductions in the number of larvae and pupae and >90% fewer emerging adults. The residual effect of AMF treatment lasted for a minimum of 5 weeks post-treatment, with reductions in larval densities reaching 94.7% in week 5 and 99.4% in week 4 for the 1 and 5 mL/m2 AMF treatments, respectively. These results merit a review of the WHO policy regarding larval source management (LSM), which primarily recommends its use in urban environments with ‘few, fixed, and findable’ breeding sites. Unmanned aerial vehicles (UAVs) can rapidly treat many permanent, temporary, or transient mosquito breeding sites over large areas at low cost, thereby significantly enhancing the role of LSM in contemporary malaria control and elimination efforts.

Single-Neuron PID UAV Variable Fertilizer Application Control System Based on a Weighted Coefficient Learning Correction

Agricultural unmanned aerial vehicles (UAVs), which are a new type of fertilizer application technology, have been rapidly developed internationally. This study combines the agronomic characteristics of rice fertilization with weighted coefficient learning-modified single-neuron adaptive proportional–integral–differential (PID) control technology to study and design an aerial real-time variable fertilizer application control system that is suitable for rice field operations in northern China. The nitrogen deficiency at the target plot is obtained from a map based on a fertilizer prescription map, and the amount of fertilizer is calculated by a variable fertilizer application algorithm. The advantages and disadvantages of the two control algorithms are analyzed by a MATLAB simulation in an indoor test, which is integrated into the spreading system to test the effect of actual spreading. A three-factor, three-level orthogonal test of fertilizer-spreading performance is designed for an outdoor test, and the coefficient of variation of particle distribution Cv (a) as well as the relative error of fertilizer application λ (b) are the evaluation indices. The spreading performance of the spreading system is the best and can effectively achieve accurate variable fertilizer application when the baffle opening is 4%, spreading disc speed is 600 r/min, and flight height is 2 m, with a and b of evaluation indexes of 11.98% and 7.02%, respectively. The control error of the spreading volume is 7.30%, and the monitoring error of the speed measurement module is less than 30 r/min. The results show that the centrifugal variable fertilizer spreader improves the uniformity of fertilizer spreading and the accuracy of fertilizer application, which enhances the spreading performance of the centrifugal variable fertilizer spreader.

Quadcopter Vehicle Proportional-Integral-Derivative Controller (PIDC) Tuning by Particle-Swarm Optimization (PSO)

Inspection of the faults and damages in high voltage transmission lines is not only unsafe and costly but also a very time-consuming process. In addition, it demands highly skilled manpower for the operation at tens of meters above the ground on cables carrying thousands of Volts. Meanwhile, the Quadcopter Aerial Vehicle (QAV) system became a popular alternative for aerial photography applications due to its low cost, ease of usage, and fast response wherein the proportional-integral-derivative controller (PIDC) is used. The PID controller compares the expected location of the drone with the actual measured position thereby can accurately detect the faults in the transmission lines. Based on these factors, in this study, the flight simulation is done according to the desired flight path, and drone imagery is used for (insulator, power line, and porcelain) flaw identification. Furthermore, three movements (roll, pitch, and yaw) of the quadcopter were controlled by different PIDC that were optimized using the particle swarm optimization (PSO). The MATLAB/Simulink application was used to develop the system and simulate the results (R2021b). This clearly suggested that the quadcopter continues to fly on a trajectory with minimum inaccuracy, wherein the PIDC operated as a closed-loop adaptive controller. Finally, the PSO-PIDC outperformed the PIDC due to the critical nature of manual gain modification for quadcopter flight stability.

Wideband Circularly Polarized Cavity-Backed Dielectric Resonator Antenna With Low RCS for Aerial Vehicle Communications

This letter explains the design of a wideband circularly polarized dielectric resonator antenna (DRA) with a dual-cylindrical conformal cavity for aerial applications. The proposed dielectric resonator (DR) element uses multilayer cross-shaped elements of varying dimensions with an off-centered circular slot that is inserted inside the DR geometry. Combining the wideband DRA with a conformal cavity (bending angle, α = 5°) that provides wider impedance bandwidth of 111% from 5.02 to 17.52 GHz and axial ratio bandwidth of 32.29% from 6.18 to 8.56 GHz. The proposed antenna provides a higher gain of 10.77 dBi at 8.5 GHz, gain values better than 7.21 dBi, and radiation efficiency better than 90% for the complete band. Also, the proposed antenna provides good radar cross-section reduction mechanism for the entire working band.

Efficacy and optimal timing of low-volume aerial applications of copper fungicides for the control of red needle cast of pine

Background: Red needle cast (RNC) is a foliar disease of radiata pine (Pinus radiata D.Don), caused by Phytophthora pluvialis Reeser, Sutton & E.Hansen and occasionally Phytophthora kernoviae Brasier, Beales & S.A.Kirk. The disease has impacted plantations in New Zealand since at least 2008. To develop management recommendations for red needle cast, research has focused on identifying chemical control options and understanding pathogen epidemiology to guide optimal timing of spray application. The objectives of this study were to: (1) assess the efficacy of aerial copper fungicide application for the control of red needle cast in mature radiata pine plantations; and (2) investigate optimal spray timing. Methods: To address these objectives, three operational-scale field trials were undertaken in successive years between 2017 and 2019 at a forest in the Central North Island of New Zealand. RNC severity was assessed in canopies of forest blocks exposed to cuprous oxide applied at 0.855 kg ha-1 active ingredient in low-volume aerial spray at different times of the year (November, February and April (or May)). Needle cast from plantation trees and infection levels on trap plants were also assessed in some years. Results: Application of cuprous oxide significantly reduced RNC severity in all three trials. As well as reducing disease severity, application of cuprous oxide also tended to reduce needle cast from plantation trees and infection on trap plants in years when these were also assessed. No consistent effect of spray timing was observed. Generally, all three spray timings reduced disease severity compared to the unsprayed control, but differences were not always significant, and few differences were detected between different spray timings. Conclusions: The results reported here are the first to show that low-volume aerial applications of cuprous oxide applied at 0.855 kg ha-1 active ingredient can reduce the severity of RNC in commercial radiata pine plantations. No consistent effect of spray timing was detected. These findings support the development of management recommendations for RNC.

Adaptive control with unknown mass estimation for a quadrotor-slung-load system

In aerial load transportation applications, knowing the mass of the load in advance is not always possible. The load dynamics depend on its mass and using a high-performance model-based controller with an inaccurate mass will introduce unmodeled disturbances to the system that will negatively affect the closed-loop performance. This paper addresses the design of a trajectory tracking controller for a quadrotor with a slung-load that has an unknown mass. The proposed solution is an adaptive controller with online estimation designed using the backstepping technique. Nonlinear control laws for thrust and angular velocity, and an adaption law for mass estimation are proposed, which guarantee the convergence of the trajectory tracking and the estimation errors to zero, and are robust to variations in load mass. Simulation and experimental results are presented to assess the validity and performance of the proposed controller.

Efficacy of insecticide aerial spraying programs to reduce tree mortality during a spruce budworm outbreak (1967–1992) in the province of Quebec

Abstract Spruce budworm (Choristoneura fumiferana) is the most important pest of conifer forests in eastern North America. The main approach for protecting forests against this defoliator is aerial spraying of insecticides. Despite the crucial role of aerial insecticide applications in the global forest protection strategy, little is known about its real effects on tree mortality or the stand characteristics that may affect its long‐term efficacy. We evaluated the efficacy of the protection program that was implemented during the 1967–1992 outbreak in Quebec (Canada) in tree mortality reduction. We established 422 plots in eastern Quebec based upon the following parameters: insecticide application; stand composition; drainage quality; and stand age. Unprotected plots exhibited 18 to 44% greater tree mortality than protected plots. Insecticide efficacy was affected by drainage condition. Protected plots that established on sites with poor quality drainage exhibited 67.53% lower balsam fir (Abies balsamea) mortality than did unprotected plots. Stand age did not affect tree mortality. Insecticide application had no substantial effect on spruce mortality. Our study also found that the return on protection investment in terms of mortality reduction may decline after 7 years of aerial spraying, and that it is not necessary to achieve the target protection goal (50% foliage protection) every year to reduce host tree mortality. Our results may be useful for decision‐makers to decide where and when to apply insecticides during a spruce budworm outbreak and may help to determine the appropriateness of treating the forest on an annual basis depending upon the protection goals.

Trunk Injection as a Tool to Deliver Plant Protection Materials—An Overview of Basic Principles and Practical Considerations

Trunk injection is a targeted delivery of pesticides, insecticides, nutrients, or other plant protection materials into the stem or trunk of woody plants as an alternative to spraying or soil drenching. Trunk injection has historically been used for disease and pest management of high-value forest tree species or ornamental plants when aerial applications are problematic due to spatial problems and health-related concerns. An interest in using the injection technique for protection of agricultural crops in commercial production systems has emerged more recently, where foliar applications and soil drenches have proven ineffective or pose environmental hazards. This review provides an overview of the basic principles of trunk injection and the plant physiological implications, its current use in commercial agriculture and other plant systems, and associated risks.

Efficiency of chemical and organic pesticides for Conogethes punctiferalis (Lepidoptera: Crambidae) in commercial chestnut and walnut fields

Efficiency of pesticides for Conogethes punctiferalis in chestnut fields. • Current pesticides of C. punctiferalis could not kill its larvae inside of fruits. • Aerial spraying the pesticides for C. punctiferalis should be applied at optimal timing. • Chlorfluazuron 5 % was the best as an aerial application pesticide among pesticides in this study. Chestnuts and walnuts are ones of most important forest products in Korea. However, Conogethes punctiferalis has been increasingly causing economic damages to chestnuts and walnuts. Currently, its management is mainly relayed on aerial application of pesticides. To select pesticides of C. punctiferalis for aerial application, damage rate of chestnut and walnut fruits and death rate of C. punctiferalis were analyzed according to selected pesticides. Experiments were conducted during two years by randomly applying chemical pesticide (i.e., Chlorfluazuron 5 % in 2018 and Thiacloprid 10 % in 2019), organic pesticide (i.e., paraffin oil 8 % + plant extracts (90 %) from Styphnolobium japonicum , Melia azedarach , and Dysphania ambrosioides ), and no treatment (i.e., control) into an area which were divided into three from a whole commercial field. All pesticides used in this study could suppress damages of walnuts and chestnuts by C. punctiferalis . However, these pesticides could not kill their larvae inside of fruits. Thus, aerial spraying these pesticides for C. punctiferalis should be applied at optimal timing or slightly earlier than optimal timing. By considering honeybee toxicity, cost, and management efficiency, Chlorfluazuron 5 % was the best as an aerial application pesticide among these three pesticide in this study.

Experimental and numerical study on heatwave effect over an airfoil for unmanned aerial vehicle applications

PurposeThe heatwave effects over an airfoil have a greater influence in the aerodynamic efficiency. The purpose of this study is to investigate the effects of heatwave upon the low Reynolds number airfoil aerodynamic performance.Design/methodology/approachIn this research, the heatwave effects on micro-aerial vehicles’ wing operation are also demonstrated both numerically and experimentally, at the Chord-based Reynolds number Rec = 2 × 105, and under the influence of various environmental temperatures, i.e. 27ºC (room temperature), 40ºC and 50ºC for various flying conditions. A numerical investigation of the low Reynolds number flows with the thermal effect around the unmanned aerial vehicle is presented using the k–ɛ turbulent model. Besides that, the low Reynolds number-based wind tunnel experimental setup is developed to determine the effects of a heatwave over an airfoil. Then, the numerical simulations and wind tunnel experiments are conducted.FindingsThe numerical and wind tunnel’s experimental investigations have been performed on a 2D airfoil under a heatwave environment, i.e. 27ºC, 40ºC and 50ºC for different flight conditions. The numerical and experimental results revealed that the heatwave effect and aerodynamic performance are validated with experimental results. The lift and drag coefficients for both numerical and experimental results show very good correlation at Reynolds number 2 × 105.Practical implicationsThe consequences of the increasing temperatures to varying degrees will also be experienced by all commercial aircraft. That is why some great findings are presented here, which are highly relevant for the current and future airline operations. However, sooner than later, the aviation industry should also begin to consider the rising effects of temperature on aircraft operations to develop the loss-reducing adaptable plans.Originality/valueFrom the numerical and wind tunnel experimental results, the recorded maximum lift coefficients are observed to be 2.42, 2.39 and 2.36 for 27ºC (room temperature), 40ºC and 50ºC, respectively, at 16° angle of attack, numerically. Similarly, the recorded maximum lift coefficients are observed to be 2.410, 2.382 and 2.354 for 27ºC (room temperature), 40ºC and 50ºC, respectively, at 16° angle of attack, experimentally. The heatwave effects over an airfoil have a greater influence in the aerodynamic efficiency.