Advanced Along-Track Scanning Radiometer Research Articles

Stability of cloud detection methods for Land Surface Temperature (LST) Climate Data Records (CDRs)

The stability of a climate data record (CDR) is essential for evaluating long-term trends in surface temperature using remote sensing products. In the case of a satellite-derived CDR of land surface temperature (LST), this includes the stability of processing steps prior to the estimation of the target climate variable. Instability in the masking of cloud-affected observations can result in non-geophysical trends in a LST CDR. This paper provides an assessment of cloud detection performance stability over a 25-year LST CDR generated using data from the second Along-Track Scanning Radiometer (ATSR-2), the Advanced Along-Track Scanning Radiometer (AATSR), the Moderate Resolution Imaging Spectroradiometer (MODIS) and the Sea and Land Surface Temperature Radiometer (SLSTR). We evaluate three cloud detection methodologies, one fully Bayesian, one naïve probabilistic and the operational threshold-based cloud mask provided with each sensor, at four in-situ ceilometer sites. Of the 12 algorithm-site combinations assessed, only two (17 %) were stable across the full timeseries with respect to both cloud contamination and missed clear-sky observations. Five (42 %) were stable with respect to missed clear-sky observations only. The associated impacts on LST trends in the CDR could be as large as (+/−)0.73 K per decade (0.43 K per decade above the target stability), which means that attention needs to be paid to this aspect of stability in order to understand uncertainty in long-term observed trends. Given that cloud detection stability has not to our knowledge been previously assessed for any target climate variable, this conclusion may apply more broadly to other satellite-derived CDRs.

Retrieval of aerosol optical depth over the Arctic cryosphere during spring and summer using satellite observations

Abstract. The climate in the Arctic has warmed much more quickly in the last 2 to 3 decades than at the mid-latitudes, i.e., during the Arctic amplification (AA) period. Radiative forcing in the Arctic is influenced both directly and indirectly by aerosols. However, their observation from ground or airborne instruments is challenging, and thus measurements are sparse. In this study, total aerosol optical depth (AOD) is determined from top-of-atmosphere reflectance measurements by the Advanced Along-Track Scanning Radiometer (AATSR) on board ENVISAT over snow and ice in the Arctic using a retrieval called AEROSNOW for the period 2003 to 2011. AEROSNOW incorporates an existing aerosol retrieval algorithm with a cloud-masking algorithm, alongside a novel quality-flagging methodology specifically designed for implementation in the high Arctic region (≥ 72∘ N). We use the dual-viewing capability of the AATSR instrument to accurately determine the contribution of aerosol to the reflection at the top of the atmosphere for observations over the bright surfaces of the cryosphere in the Arctic. The AOD is retrieved assuming that the surface reflectance observed by the satellite can be well parameterized by a bidirectional snow reflectance distribution function (BRDF). The spatial distribution of AOD shows that high values in spring (March, April, May) and lower values in summer (June, July, August) are observed. The AEROSNOW AOD values are consistent with those from collocated Aerosol Robotic Network (AERONET) measurements, with no systematic bias found as a function of time. The AEROSNOW AOD in the high Arctic was validated by comparison with ground-based measurements at the PEARL, OPAL, Hornsund, and Thule stations. The AEROSNOW AOD value is less than 0.15 on average, and the linear regression of AEROSNOW and AERONET total AOD yields a slope of 0.98, a Pearson correlation coefficient of R=0.86, and a root mean square error (RMSE) of =0.01 for the monthly scale in both spring and summer. The AEROSNOW observation of increased AOD values over the high Arctic cryosphere during spring confirms clearly that Arctic haze events were well captured by this dataset. In addition, the AEROSNOW AOD results provide a novel and unique total AOD data product for the springtime and summertime from 2003 to 2011. These AOD values, retrieved from spaceborne observation, provide a unique insight into the high Arctic cryospheric region at high spatial resolution and temporal coverage.

TRIMS LST: a daily 1 km all-weather land surface temperature dataset for China's landmass and surrounding areas (2000–2022)

Abstract. Land surface temperature (LST) is a key variable within Earth's climate system and a necessary input parameter required by numerous land–atmosphere models. It can be directly retrieved from satellite thermal infrared (TIR) observations, which contain many invalid pixels mainly caused by cloud contamination. To investigate the spatial and temporal variations in LST in China, long-term, high-quality, and spatiotemporally continuous LST datasets (i.e., all-weather LST) are urgently needed. Fusing satellite TIR LST and reanalysis datasets is a viable route to obtain long time-series all-weather LSTs. Among satellite TIR LSTs, the MODIS LST is the most commonly used, and a few corresponding all-weather LST products have been reported recently. However, the publicly reported all-weather LSTs were not available during the temporal gaps of MODIS between 2000 and 2002. In this study, we generated a daily (four observations per day) 1 km all-weather LST dataset for China's landmass and surrounding areas, the Thermal and Reanalysis Integrating Moderate-resolution Spatial-seamless (TRIMS) LST, which begins on the first day of the new millennium (1 January 2000). We used the enhanced reanalysis and thermal infrared remote sensing merging (E-RTM) method to generate the TRIMS LST dataset with the temporal gaps being filled, which had not been achieved by the original RTM method. Specifically, we developed two novel approaches, i.e., the random-forest-based spatiotemporal merging (RFSTM) approach and the time-sequential LST-based reconstruction (TSETR) approach, respectively, to produce Terra/MODIS-based and Aqua/MODIS-based TRIMS LSTs during the temporal gaps. We also conducted a thorough evaluation of the TRIMS LST. A comparison with the Global Land Data Assimilation System (GLDAS) and ERA5-Land LST demonstrates that the TRIMS LST has similar spatial patterns but a higher image quality, more spatial details, and no evident spatial discontinuities. The results outside the temporal gap show consistent comparisons of the TRIMS LST with the MODIS LST and the Advanced Along-Track Scanning Radiometer (AATSR) LST, with a mean bias deviation (MBD) of 0.09/0.37 K and a standard deviation of bias (SD) of 1.45/1.55 K. Validation based on the in situ LST at 19 ground sites indicates that the TRIMS LST has a mean bias error (MBE) ranging from −2.26 to 1.73 K and a root mean square error (RMSE) ranging from 0.80 to 3.68 K. There is no significant difference between the clear-sky and cloudy conditions. For the temporal gap, it is observed that RFSTM and TSETR perform similarly to the original RTM method. Additionally, the differences between Aqua and Terra remain stable throughout the temporal gap. The TRIMS LST has already been used by scientific communities in various applications such as soil moisture downscaling, evapotranspiration estimation, and urban heat island modeling. The TRIMS LST is freely and conveniently available at https://doi.org/10.11888/Meteoro.tpdc.271252 (Zhou et al., 2021).

An Analysis of the Stability and Trends in the LST_cci Land Surface Temperature Datasets Over Europe

AbstractLong‐term satellite land surface temperature (LST) data are desirable to augment 2m air temperatures (T2m) measured in situ and as an independent measure of surface temperature change. However, previous studies show variable agreement between LST and T2m time series. The objective of this study is to assess the stability and trends in six new LST data sets from the European Space Agency's Climate Change Initiative for LST (LST_cci). LST anomalies are compared with homogenized station T2m anomalies over Europe, which verifies all six data sets are well coupled (LST vs T2m anomaly correlations and slopes: 0.6–0.9). The temporal stability of the LST_cci data is assessed through a comparison with the T2m anomaly time series. Only the LST_cci data sets for the MODerate resolution Imaging Spectroradiometer (MODIS) onboard Aqua and the Advanced Along‐Track Scanning Radiometer (AATSR) appear stable; the MODIS/Terra, ATSR‐2, and multisensor InfraRed and MicroWave data sets show non‐climatic discontinuities associated with changes in sensor and/or drift over time. For MODIS/Aqua (2002–2018), significant trends in LST of 0.64–0.66 K/decade compare well with the equivalent T2m trends of 0.52–0.59 K/decade. The LST and T2m trends for AATSR (2002–2012) are found to be statistically insignificant, likely due to the comparatively short study period and specific years available for analysis. No evidence is found to suggest that trends calculated using cloud‐free InfraRed observations are affected by clear‐sky bias. This study suggests that satellite LST data can be used to assess warming trends over land and for other climate applications if the required homogeneity is assured.

Bayesian Cloud Detection over Land for Climate Data Records

Cloud detection is a necessary step in the generation of land surface temperature (LST) climate data records (CDRs) and affects data quality and uncertainty. We present here a sensor-independent Bayesian cloud detection algorithm and show that it is suitable for use in the production of LST CDRs. We evaluate the performance of the cloud detection with reference to two manually masked datasets for the Advanced Along-Track Scanning Radiometer (AATSR) and find a 7.9% increase in the hit rate and 4.9% decrease in the false alarm rate when compared to the operational cloud mask. We then apply the algorithm to four instruments aboard polar-orbiting satellites, which together can produce a global, 25-year LST CDR: the second Along-Track Scanning Radiometer (ATSR-2), AATSR, the Moderate Resolution Spectroradiometer (MODIS Terra) and the Sea and Land Surface Temperature Radiometer (SLSTR-A). The Bayesian cloud detection hit rate is assessed with respect to in situ ceilometer measurements for periods of overlap between sensors. The consistency of the hit rate is assessed between sensors, with mean differences in the cloud hit rate of 4.5% for ATSR-2 vs. AATSR, 4.9% for AATSR vs. MODIS, and 2.5% for MODIS vs. SLSTR-A. This is important because consistent cloud detection performance is needed for the observational stability of a CDR. The application of a sensor-independent cloud detection scheme in the production of CDRs is thus shown to be a viable approach to achieving LST observational stability over time.

Retrieval of Sea Surface Temperature From HY-1B COCTS

The Chinese Ocean Color and Temperature Scanner (COCTS) on board HY-1 series satellites has two thermal infrared channels with the spectrum range of 10.30-11.40 μm and 11.40-12.50 μm for sea surface temperature (SST) observations. To reprocess the Haiyang-1B (HY-1B) COCTS SST, the Bayesian cloud detection and optimal estimation (OE) SST retrieval were applied to COCTS data in this study. The Bayesian cloud detection algorithm that has been developed is based on the Bayes’ theorem and uses simulation of COCTS observations. The MODerate resolution atmospheric TRANsmission (MODTRAN) model was used for simulation of COCTS brightness temperatures. SSTs were retrieved from COCTS by OE from 2009 to 2011 in the northwest Pacific. Comparison of COCTS OE SST with in situ SST showed that the COCTS SSTs are cooler than buoy measurements by –0.23 °C on average, and the standard deviation (SD) of differences was 0.51 °C. A large component of the mean difference is attributable to the cool skin effect at the ocean surface (typically –0.15 to –0.2 °C), the remainder being attributable to simulation and calibration biases. The mean difference of COCTS OE SST with matched skin temperatures from the Advanced Along Track Scanning Radiometer (AATSR) is closer to zero, being –0.09 °C, with a SD of 0.49 °C. These validation results of COCTS OE SST demonstrate that Bayesian cloud detection and OE SST retrieval algorithm work well for improving COCTS SST accuracy, and show the potential of these methods to help develop SST products for operational HY-1 satellites, HY-1C and HY-1D.

Two decades of aerosol observations by AATSR, MISR, MODIS and MERRA-2 over India and Indian Ocean

Atmospheric aerosols play key roles in radiation budget, ecosystem dynamics, air quality and cloud microphysics of a region and thus, they greatly influence the global climate, ecosystem and public health. We present the temporal variability of atmospheric aerosols over India and north Indian Ocean (NIO) for the past two decades (2000–2019). Here, the measurements from Moderate Resolution Imaging Spectroradiometer (MODIS) on Terra, Multi-angle Imaging Spectroradiometer (MISR) on Terra, and Advanced Along Track Scanning Radiometer (AATSR) measurements from Envisat, and Modern-Era Retrospective analysis for Research and Applications version 2 (MERRA-2) reanalysis data are considered. On average, the Indo Gangetic Plain (IGP) shows the largest (0.5–1.2), and NIO and Himalaya show the smallest (0.1 or smaller) Aerosol Optical depth (AOD) values. The peak AOD loading is observed in June–July-August, and IGP has a secondary peak in March owing to the stubble and biomass burning in winter months. In contrast, the peak aerosol loading in the northeast is in winter due to forest and biomass burning during the period there. The inter-annual variability is very small in NIO, Himalaya and Bay of Bengal. The trends estimated from the combined (AATSR, MISR, MODIS and MERRA-2) data show the highest positive trends at the lower IGP and east central regions, about 0.8–1.2/dec, and are statistically significant. This is consistent with the urban activity, industries and dense population there. However, the Desert, northern Himalaya and northern Arabian Sea show insignificant negative trends, from −0.2 to −0.4/dec, as the anthropogenic sources of aerosols are very limited there. The bias estimate shows that most satellite and reanalysis data are in very good agreement at all regions (within 0.1–0.2). Even though the bias in the measurements are considered, the trends estimated are still large enough to be statistically significant. The analyses, therefore, caution the increasing aerosol loading and their plausible climate feedback in these regions. The assessment also demonstrate the potential of synergetic use of multiple-platform measurements for climate system studies.

Improved cloud detection over sea ice and snow during Arctic summer using MERIS data

Abstract. The historic MERIS (Medium Resolution Imaging Spectrometer) sensor on board Envisat (Environmental Satellite, operation 2002–2012) provides valuable remote sensing data for the retrievals of summer sea ice in the Arctic. MERIS data together with the data of recently launched successor OLCI (Ocean and Land Colour Instrument) on board Sentinel 3A and 3B (2016 onwards) can be used to assess the long-term change of the Arctic summer sea ice. An important prerequisite to a high-quality remote sensing dataset is an accurate separation of cloudy and clear pixels to ensure lowest cloud contamination of the resulting product. The presence of 15 visible and near-infrared spectral channels of MERIS allows high-quality retrievals of sea ice albedo and melt pond fraction, but it makes cloud screening a challenge as snow, sea ice and clouds have similar optical features in the available spectral range of 412.5–900 nm. In this paper, we present a new cloud screening method MECOSI (MERIS Cloud Screening Over Sea Ice) for the retrievals of spectral albedo and melt pond fraction (MPF) from MERIS. The method utilizes all 15 MERIS channels, including the oxygen A absorption band. For the latter, a smile effect correction has been developed to ensure high-quality screening throughout the whole swath. A total of 3 years of reference cloud mask from AATSR (Advanced Along-Track Scanning Radiometer) (Istomina et al., 2010) have been used to train the Bayesian cloud screening for the available limited MERIS spectral range. Whiteness and brightness criteria as well as normalized difference thresholds have been used as well. The comparison of the developed cloud mask to the operational AATSR and MODIS (Moderate Resolution Imaging Spectroradiometer) cloud masks shows a considerable improvement in the detection of clouds over snow and sea ice, with about 10 % false clear detections during May–July and less than 5 % false clear detections in the rest of the melting season. This seasonal behavior is expected as the sea ice surface is generally brighter and more challenging for cloud detection in the beginning of the melting season. The effect of the improved cloud screening on the MPF–albedo datasets is demonstrated on both temporal and spatial scales. In the absence of cloud contamination, the time sequence of MPFs displays a greater range of values throughout the whole summer. The daily maps of the MPF now show spatially uniform values without cloud artifacts, which were clearly visible in the previous version of the dataset. The developed cloud screening routine can be applied to address cloud contamination in remote sensing data over sea ice. The resulting cloud mask for the MERIS operating time, as well as the improved MPF–albedo datasets for the Arctic region, is available at https://www.seaice.uni-bremen.de/start/ (Istomina et al., 2017).

Retrievals of key biophysical parameters at mesoscale from the Ts/VI scatterplot domain

Earth Observation (EO) is often combined with simulated process models to gain insight on key parameters for the physical mechanisms and interactions of the Earth's system. The objective of this study is two-fold: First, it explores the combined use of EO data from the Advanced Along-Track Scanning Radiometer (AATSR) with the SimSphere land biosphere model via the “triangle” to derive latent (LE) and sensible heat (H) fluxes and soil moisture content (SMC) for diverse European ecosystems. Secondly, it investigates the influence of atmospheric correction on the “triangle”-derived retrievals. Both non-atmospherically (1P) and atmospherically corrected (2P) AATSR data products are used. The data cover selected days from 2007 to 2011 at 12 sites of a European ground monitoring network. For all the predicted parameters, the 2P product leads to improved statistical validation measures. The present study for the first time: (1) assesses the triangle technique at 1km mesoscale resolution using AATSR data; (2) investigates the effects of atmospheric correction and surface heterogeneity on prediction accuracy. The findings provide important information regarding potential operational use of the technique.

Credibility and statistical characteristics of CAMSRA and MERRA-2 AOD reanalysis products over the Sichuan Basin during 2003–2018

Owing to its large population, unique topography, and rapid industrialization and urbanization, the Sichuan Basin (SCB) is one of the most polluted regions in China, as reflected by the large aerosol optical depth (AOD). In this study, the credibility of two long-term atmospheric composition reanalysis datasets—the Modern-Era Retrospective Analysis for Research and Applications, version 2 (MERRA-2) and Copernicus Atmosphere Monitoring Service Reanalysis (CAMSRA)—are evaluated using Moderate Resolution Imaging Spectroradiometer (MODIS) AOD products over the SCB during 2003–2018. The time series of the three datasets at seasonal, monthly and annual scales exhibit some interesting similarities and differences, but with all of them demonstrating a prominent slowing down of the severe air pollution status over the SCB since 2012 (−0.25/7yrs for MODIS and CAMSRA and −0.12/7yrs for MERRA-2). CAMSRA shows good consistency with MODIS at all time scales (correlation coefficients varying from 0.89 to 0.97 at four seasons) despite its systematic overestimation (～0.2) throughout the 16-year study period. MERRA-2 has a negative deviation during 2003–2006 and then maintains an increasing positive deviation in the following years (0.05–0.2). This positive bias increases as MODIS AOD declines prominently from 2014. The good temporal consistency of CAMSRA is partly attributable to the bias correction of the assimilated remotely sensed AOD from MODIS and AATSR (Advanced Along-Track Scanning Radiometer). The differences between the reanalysis and MODIS are obvious during October–December, which may be related to the cloud contamination effects as well as the uncertainties of emissions in each model system. The uniform decreasing trend of the three datasets since 2012 supports the effects of the tough emissions reduction policy, which is also evident in AOD changes of anthropogenic species. It is concluded that atmospheric composition reanalysis data with good spatial and temporal coverage can be considered in future air quality analyses over the SCB. However, the bias and regional dependence should be handled carefully.

Cloud<i>_</i>cci ATSR-2 and AATSR data set version 3: a 17-year climatology of global cloud and radiation properties

Abstract. We present version 3 (V3) of the Cloud_cci Along-Track Scanning Radiometer (ATSR) and Advanced ATSR (AATSR) data set. The data set was created for the European Space Agency (ESA) Cloud_cci (Climate Change Initiative) programme. The cloud properties were retrieved from the second ATSR (ATSR-2) on board the second European Remote Sensing Satellite (ERS-2) spanning 1995–2003 and the AATSR on board Envisat, which spanned 2002–2012. The data are comprised of a comprehensive set of cloud properties: cloud top height, temperature, pressure, spectral albedo, cloud effective emissivity, effective radius, and optical thickness, alongside derived liquid and ice water path. Each retrieval is provided with its associated uncertainty. The cloud property retrievals are accompanied by high-resolution top- and bottom-of-atmosphere shortwave and longwave fluxes that have been derived from the retrieved cloud properties using a radiative transfer model. The fluxes were generated for all-sky and clear-sky conditions. V3 differs from the previous version 2 (V2) through development of the retrieval algorithm and attention to the consistency between the ATSR-2 and AATSR instruments. The cloud properties show improved accuracy in validation and better consistency between the two instruments, as demonstrated by a comparison of cloud mask and cloud height with co-located CALIPSO data. The cloud masking has improved significantly, particularly in its ability to detect clear pixels. The Kuiper Skill score has increased from 0.49 to 0.66. The cloud top height accuracy is relatively unchanged. The AATSR liquid water path was compared with the Multisensor Advanced Climatology of Liquid Water Path (MAC-LWP) in regions of stratocumulus cloud and shown to have very good agreement and improved consistency between ATSR-2 and AATSR instruments. The correlation with MAC-LWP increased from 0.4 to over 0.8 for these cloud regions. The flux products are compared with NASA Clouds and the Earth's Radiant Energy System (CERES) data, showing good agreement within the uncertainty. The new data set is well suited to a wide range of climate applications, such as comparison with climate models, investigation of trends in cloud properties, understanding aerosol–cloud interactions, and providing contextual information for co-located ATSR-2/AATSR surface temperature and aerosol products. The following new digital identifier has been issued for the Cloud_cci ATSR-2/AATSRv3 data set: https://doi.org/10.5676/DWD/ESA_Cloud_cci/ATSR2-AATSR/V003 (Poulsen et al., 2019).

Ten Years of Satellite Infrared Radiance Monitoring With the Met Office NWP Model

Satellite sounder infrared radiances are among the most important contributions to the global observing system and have been assimilated into global numerical weather prediction (NWP) analyses for many years. They are also used as fundamental climate data records for climate monitoring. Prior to assimilation or producing climate records, the radiances should have all residual instrument biases removed. One way of estimating the mean biases is to continuously monitor the measured radiances against the NWP model equivalent radiances. This article is an extension of one published in 2012 which documented these biases for three years but now the time span of the monitoring has extended to beyond ten years, allowing the long-term stability of the instruments to be assessed. Data from high-resolution infrared sounder (HIRS), Advanced Along Track Scanning Radiometer (AATSR), and Spinning Enhanced Visible and Infrared Imager (SEVIRI), radiometers; atmospheric infrared sounder (AIRS), a spectrometer; and infrared atmospheric sounding interferometer (IASI), an interferometer, were included. Changes in mean biases and standard deviations were used to investigate the temporal stability of the bias and radiometric noise of the instruments over ten years. A double difference technique was employed to remove the effect of changes or deficiencies in the NWP system and radiative transfer (RT) model, which can contribute to the biases. The IASI and AIRS radiances were stable but with a different bias between the two instruments due to different versions of the RT model used. The SEVIRI radiometers were stable in most channels with the exception of the 13.4 μm channel. The HIRS instruments were subject to sudden changes in bias and increases in standard deviation compared with NWP simulations during the past decade.

Harmonization of Space-Borne Infra-Red Sensors Measuring Sea Surface Temperature

Sea surface temperature (SST) is observed by a constellation of sensors, and SST retrievals are commonly combined into gridded SST analyses and climate data records (CDRs). Differential biases between SSTs from different sensors cause errors in such products, including feature artefacts. We introduce a new method for reducing differential biases across the SST constellation, by reconciling the brightness temperature (BT) calibration and SST retrieval parameters between sensors. We use the Advanced Along-Track Scanning Radiometer (AATSR) and the Sea and Land Surface Temperature Radiometer (SLSTR) as reference sensors, and the Advanced Very High Resolution Radiometer (AVHRR) of the MetOp-A mission to bridge the gap between these references. Observations across a range of AVHRR zenith angles are matched with dual-view three-channel skin SST retrievals from the AATSR and SLSTR. These skin SSTs act as the harmonization reference for AVHRR retrievals by optimal estimation (OE). Parameters for the harmonized AVHRR OE are iteratively determined, including BT bias corrections and observation error covariance matrices as functions of water-vapor path. The OE SSTs obtained from AVHRR are shown to be closely consistent with the reference sensor SSTs. Independent validation against drifting buoy SSTs shows that the AVHRR OE retrieval is stable across the reference-sensor gap. We discuss that this method is suitable to improve consistency across the whole constellation of SST sensors. The approach will help stabilize and reduce errors in future SST CDRs, as well as having application to other domains of remote sensing.

On the retrieval of aerosol optical depth over cryosphere using passive remote sensing

The lack of aerosol information over the cryosphere introduces large uncertainties to our understanding of phenomenon, known as the Arctic Amplification (AA) and its feedback mechanisms. The aerosol optical depth (AOD) describes the optical characteristics of aerosol loading. This paper describes a novel algorithm, which retrieves AOD above snow-covered regions from the measurements of the up-welling radiation at the top of atmosphere, observed by the Advanced Along-Track Scanning Radiometer (AATSR) and the Sea and Land Surface Temperature Radiometer (SLSTR) instruments. The algorithm optimizes the generic eXtensible Bremen Aerosol/cloud and surfacE parameters Retrieval (XBAER) approach for longer wavelengths over the cryosphere. The algorithm utilizes the characteristics of solar bidirectional distribution properties of snow and aerosol at wavelength 3.7 μm to derive above-snow-AOD. Since the impact of fine-mode aerosol on 3.7 μm is ignorable, the retrieved AOD in this manuscript represents mainly coarse-mode dominated part. A novel method to extract the solar reflection part at 3.7 μm is presented and used in the surface parameterization. Two aerosol types (sea salt-dominated and dust-dominated) are used and the best-fit type is derived by an iterative procedure, using a Look-Up-Table (LUT) approach. Sensitivity studies of the impact on the retrieved AOD using XBAER algorithm, which investigate the impacts of aerosol type, snow surface emissivity and potential cloud contamination under typical AATSR observation conditions, are presented. The sensitivity studies show that the surface parametrization and aerosol typing are suitable for the retrieval of above-snow-AOD over the Arctic snow-covered region. AOD observations retrieved in this study from AATSR (2002–2012) observation collocated with those from the Aerosol Robotic Network (AERONET) sites over Greenland show good agreement. 72.1% of the match-ups fall into the expected error envelope of (±0.15AOD ± 0.025). The AATSR derived above-snow-AOD at 0.55 μm research product has also been compared with Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observations (CALIPSO) aerosol product, the Mineral Aerosols Profiling from Infrared Radiances (MAPIR) derived Infrared Atmospheric Sounding Interferometer (IASI) AOD research product, and the Modern-Era Retrospective analysis for Research and Applications, Version 2 (MERRA-2) AOD simulations over Greenland on April 2011. The comparison reveals that all datasets show similar patterns for the AOD above Greenland. The AOD is smaller in central Greenland and larger over the coastline regions. The XBAER derived above-snow-AOD has improved coverage, as compared to that of the existing AATSR aerosol product. The transition between above-snow-AOD and AOD derived over surrounding ocean surfaces does not indicate any systematic errors. Two aerosol transport events have been well-captured by the XBAER derived above-snow-AOD research product. The new algorithm is also applied to the SLSTR onboard Sentinel-3 demonstrating new SLSTR above-snow-AOD data products, and its value for research in the changing AOD during the period of Arctic Amplification.

Lee wave detection over the Mediterranean Sea using the Advanced Infra-Red WAter Vapour Estimator (AIRWAVE) total column water vapour (TCWV) dataset

Abstract. Atmospheric gravity waves generated downstream by orography in a stratified airflow are known as lee waves. In the present study, such mesoscale patterns have been detected, over water and in clear-sky conditions, using the Advanced Infra-Red WAter Vapour Estimator (AIRWAVE) total column water vapour (TCWV) dataset, which contains about 20 years of day and night products, obtained from the thermal infrared measurements of the Along Track Scanning Radiometer (ATSR) instrument series. The high accuracy of such data, along with the native 1 km×1 km spatial resolution, allows the investigation of small-scale features such as lee waves. In this work, we focused on the Mediterranean Sea, the largest semi-enclosed basin on the Earth. The peculiarities of this area, which is characterised by complex orography and rough coastlines, lead to the development of these structures over both land and sea. We developed an automatic tool for the rapid detection of areas with high probability of lee wave occurrence, exploiting the TCWV variability in spatial regions with a 0.15∘×0.15∘ area. Through this analysis, several occurrences of structures connected with lee waves have been observed. The waves are detected in spring, autumn and summer seasons, with TCWV values usually falling in the range of 15 to 35 kg m−2. In this article, we describe some cases over the central (Italy) and the Eastern Mediterranean Basin (Greece, Turkey and Cyprus). We compared a case of perturbed AIRWAVE TCWV fields due to lee waves occurring over the Tyrrhenian Sea on 18 July 1997 with the sea surface winds from the synthetic aperture radar (SAR), which sounded the same geographical area, finding a good agreement. Another case has been investigated in detail: on 2 August 2002 the Aegean Sea region was almost simultaneously sounded by both the second sensor of the ATSR series (ATSR-2) and the Advanced ATSR (AATSR) instruments. The AIRWAVE TCWV fields derived from the two sensors were successfully compared with the vertically integrated water vapour content simulated with the Weather Research and Forecasting (WRF) numerical model for the same time period, confirming our findings. Wave parameters such as amplitude, wavelength and phase are described through the use of the Morlet continuous wavelet transformation (CWT). The performed analysis derived typical wavelengths from 6 to 8 km and amplitudes of up to 20 kg m−2.

VALIDATION OF AEROSOL PRODUCTS FROM ESA/AATSR OVER CHINA AND AOD FUSION BASED ON UNCERTAINTIES

Abstract. Aerosols play an important role in climate changes and environmental changes as well as on human health. ADV v3.11, ORAC v4.10, and SU v4.32 was three new versions of Advanced Along-Track Scanning Radiometer (AATSR) aerosol datasets which are published on Climate Change Initiative (CCI). In order to evaluate the accuracy of three AATSR aerosol optical depth (AOD) datasets, and to improve the spatial coverage and accuracy of AATSR AOD dataset, this study completed two works: the first part is validated the accuracy of three AOD datasets; the second part is fused three AATSR AOD datasets based on uncertainty of each dataset. After comparing with AERONET and CARSNET ground-based data over China, results show that the root-mean-square error (RMSE) for ADV v3.11, ORAC v4.10, SU v4.32 and fused AOD are 0.22, 0.17, 0.18, 0.17 respectively.

Investigations into the development of a satellite-based aerosol climate data record using ATSR-2, AATSR and AVHRR data over north-eastern China from 1987 to 2012

Abstract. Satellites provide information on the temporal and spatial distributions of aerosols on regional and global scales. With the same method applied to a single sensor all over the world, a consistent data set is to be expected. However, the application of different retrieval algorithms to the same sensor and the use of a series of different sensors may lead to substantial differences, and no single sensor or algorithm is better than any other everywhere and at all times. For the production of long-term climate data records, the use of multiple sensors cannot be avoided. The Along Track Scanning Radiometer (ATSR-2) and the Advanced ATSR (AATSR) aerosol optical depth (AOD) data sets have been used to provide a global AOD data record over land and ocean of 17 years (1995–2012), which is planned to be extended with AOD retrieved from a similar sensor. To investigate the possibility of extending the ATSR data record to earlier years, the use of an AOD data set from the Advanced Very High Resolution Radiometer (AVHRR) is investigated. AOD data sets used in this study were retrieved from the ATSR sensors using the ATSR Dual View algorithm ADV version 2.31, developed by Finnish Meteorological Institute (FMI), and from the AVHRR sensors using the aerosol optical depth over land (ADL) algorithm developed by RADI/CAS. Together, these data sets cover a multi-decadal period (1987–2012). The study area includes two contrasting areas, both in regards to aerosol content and composition and surface properties, i.e. a region over north-eastern China, encompassing a highly populated urban/industrialized area (Beijing–Tianjin–Hebei) and a sparsely populated mountainous area. Ground-based AOD observations available from ground-based sun photometer AOD data in AERONET and CARSNET are used as a reference, together with broadband extinction method (BEM) data at Beijing to cover the time before sun photometer observations became available in the early 2000s. In addition, MODIS-Terra C6.1 AOD data are used as a reference data set over the wide area where no ground-based data are available. All satellite data over the study area were validated against the reference data, showing the qualification of MODIS for comparison with ATSR and AVHRR. The comparison with MODIS shows that AVHRR performs better than ATSR in the north of the study area (40∘ N), whereas further south ATSR provides better results. The validation against sun photometer AOD shows that both AVHRR and ATSR underestimate the AOD, with ATSR failing to provide reliable results in the wintertime. This is likely due to the highly reflecting surface in the dry season, when AVHRR-retrieved AOD traces both MODIS and reference AOD data well. However, AVHRR does not provide AOD larger than about 0.6 and hence is not reliable when high AOD values have been observed over the last decade. In these cases, ATSR performs much better for AOD up to about 1.3. AVHRR-retrieved AOD compares favourably with BEM AOD, except for AOD higher than about 0.6. These comparisons lead to the conclusion that AVHRR and ATSR AOD data records each have their strengths and weaknesses that need to be accounted for when combining them in a single multi-decadal climate data record.

Variational bias correction of satellite sea‐surface temperature data incorporating observations of the bias

We describe a variational bias‐correction system for satellite sea‐surface temperature (SST) data that includes the use of “observations‐of‐bias”. The bias‐correction scheme is designed to work in the historical period, when good quality low‐bias reference data were scarce, but can also take advantage of reference data when they are available. In testing with a simple Lorenz 63 model, our new scheme outperformed traditional variational bias correction. When compared with an offline bias‐correction method, the new scheme showed superior performance both when the bias was large and when reference observations were sparse. The bias‐correction scheme has also been tested using a three‐year assimilative run (2008–2010) of the Nucleus for European Modeling of the Ocean (NEMO) ocean general circulation model, with reference data from the Advanced Along Track Scanning Radiometer (AATSR) instrument withheld in 2009. In these tests, the new scheme was found to be more robust to missing reference observations than an offline scheme. Against AATSR data, the new bias‐correction method had lower biases and root‐mean‐square (RMS) errors than an offline scheme, but was degraded relative to a pure variational technique. However, in comparisons with drifting buoys, the new scheme outperformed both offline and pure variational methods.

Intercomparison in spatial distributions and temporal trends derived from multi-source satellite aerosol products

Abstract. Satellite-derived aerosol products provide long-term and large-scale observations for analysing aerosol distributions and variations, climate-scale aerosol simulations, and aerosol–climate interactions. Therefore, a better understanding of the consistencies and differences among multiple aerosol products is important. The objective of this study is to compare 11 global monthly aerosol optical depth (AOD) products, which are the European Space Agency Climate Change Initiative (ESA-CCI) Advanced Along-Track Scanning Radiometer (AATSR), Advanced Very High Resolution Radiometer (AVHRR), Multi-angle Imaging SpectroRadiometer (MISR), Moderate Resolution Imaging Spectroradiometer (MODIS), Sea-viewing Wide Field-of-view Sensor (SeaWiFS), Visible Infrared Imaging Radiometer (VIIRS), and POLarization and Directionality of the Earth's Reflectance (POLDER) products. AErosol RObotic NEtwork (AERONET) Version 3 Level 2.0 monthly measurements at 308 sites around the world are selected for comparison. Our results illustrate that the spatial distributions and temporal variations of most aerosol products are highly consistent globally but exhibit certain differences on regional and site scales. In general, the AATSR Dual View (ADV) and SeaWiFS products show the lowest spatial coverage with numerous missing values, while the MODIS products can cover most areas (average of 87 %) of the world. The best performance is observed in September–October–November (SON) and the worst is in June–July–August (JJA). All the products perform unsatisfactorily over northern Africa and Middle East, southern and eastern Asia, and their coastal areas due to the influence from surface brightness and human activities. In general, the MODIS products show the best agreement with the AERONET-based AOD values on different spatial scales among all the products. Furthermore, all aerosol products can capture the correct aerosol trends at most cases, especially in areas where aerosols change significantly. The MODIS products perform best in capturing the global temporal variations in aerosols. These results provide a reference for users to select appropriate aerosol products for their particular studies.

Aerosol Optical Depth over the Arctic Snow-Covered Regions Derived from Dual-Viewing Satellite Observations

Aerosol properties over the Arctic snow-covered regions are sparsely provided by temporal and spatially limited in situ measurements or active Lidar observations. This introduces large uncertainties for the understanding of aerosol effects on Arctic climate change. In this paper, aerosol optical depth (AOD) is derived using the advanced along-track scanning radiometer (AATSR) instrument. The basic idea is to utilize the dual-viewing observation capability of AATSR to reduce the impacts of AOD uncertainties introduced by the absolute wavelength-dependent error on surface reflectance estimation. AOD is derived assuming that the satellite observed surface reflectance ratio can be well characterized by a snow bidirectional reflectance distribution function (BRDF) model with a certain correction direct from satellite top of the atmosphere (TOA) observation. The aerosol types include an Arctic haze aerosol obtained from campaign measurement and Arctic background aerosol (maritime aerosol) types. The proper aerosol type is selected during the iteration step based on the minimization residual. The algorithm has been used over Spitsbergen for the spring period (April–May) and the AOD spatial distribution indicates that the retrieval AOD can capture the Arctic haze event. The comparison with AERONET observations shows promising results, with a correlation coefficient R = 0.70. The time series analysis shows no systematical biases between AATSR retrieved AOD and AERONET observed ones.