Adsorption Of Acid Research Articles

The Fate of the Formic Acid Proton on the Anatase TiO2(101) Surface.

As a prototype adsorption reaction of gas Brønsted acid on oxides, we study the adsorption of formic acid on anatase. We perform infrared spectroscopy measurements of adsorbed HCOOH and HCOOD on TiO2 nanopowders, from 13 K up to room temperature in an ultra-high vacuum chamber. We assign the IR signals via computed spectra from nuclear quantum dynamics simulations using our divide-and-conquer semiclassical ab initio molecular dynamics method. The acid proton forms an extraordinarily short and strong hydrogen bond with the surface oxygen. The strength of this hydrogen bond, that compares to H bonds in ice at high pressures, is at the root of a substantial redshift with respect to the typical free OH stretching frequency, which eludes its straightforward detection.

Physicochemical Characteristics of Porous Starch Obtained by Combined Physical and Enzymatic Methods-Part 2: Potential Application as a Carrier of Gallic Acid.

Wettability measurements were performed for aqueous dispersions of native and modified corn, potato, and pea starch granules deposited on glass plates by the thin layer method using test liquids of a different chemical nature (polar water and formamide or non-polar diiodomethane). High values of the determination coefficient R2 confirm that the linear regression model describes the relationship between the wetting time and the square of the penetration distance very well, indicating the linear nature of the Washburn relationship. A change in free energy (enthalpy) during the movement of the liquid in the porous layer was determined for all starches before and after modification in contact with test liquids. Wetting times for polar liquids increased significantly (from 3 to 4 fold), especially for corn starch. The lower the value of the adhesive tension, the easier the wetting process takes place, and consequently, the adsorption process is facilitated. Adhesive tension for polar substances applies to the adsorption of hydrophilic substances, while in the case of apolar substances, adhesive tension applies to the adsorption of hydrophobic substances. For the adsorption of gallic acid on starch, the relationships obtained for polar substances are crucial. The adsorption of gallic acid by forming hydrogen bonds or, more generally, donor-acceptor (acid-base) bonds is definitely higher for corn starch than other starches. Therefore, this starch has the most significant potential for use as a carrier of gallic acid or, more broadly, compounds from the polyphenol group.

Rapid Synthesis of α-Hemihydrate Phosphogypsum in MgCl2 Solution by Microwave Heating.

The preparation of α-hemihydrate phosphogypsum (α-HPG) is hindered by a lengthy reaction time due to using traditional electric heating. Microwave heating was proposed for the rapid synthesis of α-HPG in MgCl2 solution. The effects of MgCl2 concentration on the heating rate of solution and conversion rate of α-HPG were investigated; the morphology of α-HPG was regulated by citric acid, and the adsorption mechanism of citric acid on the α-HPG surface was clarified. The results show that α-HPG was successfully synthesized in a MgCl2 solution by microwave heating. Increasing the MgCl2 concentration can improve both the dielectric constant and conductivity of the solution, which is advantageous for the solution to absorb more microwave energy. Consequently, the conversion rate of phosphogypsum (PG) into α-HPG was improved at higher MgCl2 concentrations. In 2.62 mol/L MgCl2 solution, the heating time is shortened to 7 min from room temperature to 95 °C, and PG was converted to α-HPG within 60 min. The morphology of α-HPG could be controlled by chemical adsorption of citric acid onto its terminal surface. In a solution containing 2.62 mol/L MgCl2 and 1.63 × 10-2 mol/L citric acid, PG was completely transformed into α-HPG at 90 min by microwave heating, whereas the reaction time was delayed to 180 min using electric heating. Accordingly, microwave heating is a highly efficient and energy-saving method for the preparation of α-HPG.

Adsorption of aminomethylphosphonic acid on pristine graphene and graphene doped with transition metals: A theoretical study

Aminomethylphosphonic acid (AMPA), a glyphosate breakdown product, exhibits environmental persistence, raising concerns. This study investigates AMPA adsorption on pristine and transition metal-doped graphene using quantum theory of atoms in molecules calculations. Results revealed favorable adsorption energies for pristine graphene, significantly enhanced by doping, with Co-doped graphene exhibiting the highest adsorption energy. Interactions were predominantly physisorption, and doping did not significantly alter graphene’s electronic structure. Tight-binding dynamics simulations demonstrated efficient AMPA adsorption on doped graphene, with Co exhibiting the strongest binding affinity. These findings highlight the potential of transition metal-doped graphene as an effective adsorbent for removing AMPA from water sources.

Effect of water on formic acid and formaldehyde decomposition on the TiO2 (110) surface

The catalytic and photocatalytic performance of TiO2 in air pollutant degradation is significantly influenced by the adsorption of water. Here, we explore the molecular mechanism of formic acid and formaldehyde decomposition and their interaction with water on the TiO2 (110) surface, employing density functional theory (DFT) calculations and reactive molecular dynamics (RMD) simulations. RMD simulations indicate that due to the competitive adsorption of water at the surface Ti site, formic acid predominantly exists in a monodentate dissociative adsorption form on the TiO2 (110) surface. Moreover, on the TiO2 (110) surface, water molecules inhibit the adsorption and dissociation of formic acid, but they facilitate that of formaldehyde, forming methanediol (*CH2OHO) and dioxymethylene (*CH2O2). DFT calculations suggest that the formation pathway of *CH2OHO or *CH2O2 is energetically favorable, but the formation of formate is difficult. This contrasts with the adsorption of formaldehyde on the anatase surface, where formate species are formed.

Ammonia recovery via stripping from hydrothermal liquefaction aqueous from sludge for anaerobic co-digestion pretreatment

Hydrothermal liquefaction (HTL) is a thermo-chemical method of processing wastewater solids that could be preferential over anaerobic digestion (AD) because it produces a greatly reduced volume of solids. Instead, the effluent can be separated into biocrude refined into fuel, hydrochar a carbon-rich solid and HTL aqueous waste. Unfortunately, HTL aqueous is high in ammonia, phenolics, and nitrogen heterocyclic compounds that can inhibit AD if used for treatment. Ammonia stripping was tested for pretreatment of HTL aqueous from dewatered mixed sludge at 350 °C, 15 min and recovering ammonia. Seven stripping reactor conditions were run, and the best results were seen at 85 °C, a pH of 9.3 and 500 mL/min air flow rate. This case achieved ammonia and total phenolic compounds removal of 79.5 ± 0.1 and 32 ± 1 %, respectively, in 4 h. The ammonia stripping was coupled with acid adsorption to produce an ammonium sulphate salt with fertilizer value. The ideal ammonia stripping conditions produced a salt with a purity of 98.0 ± 0.05 % and represented an ammonia recovery of 73.9 ± 0.04 %. Semi-continuous flow bench-scale thermophilic anaerobic co-digestion of HTL aqueous with municipal sludge found that 12 % of influent chemical oxygen demand (COD) can come from HTL aqueous without inhibition if pretreated with ammonia stripping, while the digester fed with a similar COD from non-pretreated HTL aqueous showed inhibition. Under mesophilic conditions, semi-continuous flow anaerobic co-digestion was successful for non-pretreated and pretreated HTL aqueous even with 24 % and 22 % of influent COD provided by HTL aqueous, respectively.

Physical Adsorption of Polyacrylic Acid on Boron Nitride Nanotube Surface and Enhanced Thermal Conductivity of Poly(vinyl alcohol) Composites.

To fully tap into the potential of boron nitride nanotubes (BNNTs), addressing their inherent insolubility was imperative. In this study, a water-soluble polymer, poly(acrylic acid) (PAA), was employed as a surface-active reagent, using an accessible and scalable approach. The physical properties and structure of PAA-BNNT were meticulously confirmed through valuable characterization techniques, encompassing X-ray diffraction, scanning electron microscopy, Fourier-transform infrared, X-ray photoelectron spectroscopy, and thermogravimetric analysis. PAA-BNNT exhibited remarkable dispersion in water and demonstrated compatibility with the poly(vinyl alcohol) (PVA) matrix. When incorporating 30 wt % of PAA-BNNT (about 24.75 wt % net BNNT) into the PVA matrix, the thermal conductivity surged by over 21.7 times compared to pure PVA due to the uniform dispersion of high-concentration PAA-BNNT in the polymer matrix.

Adhesion promotion and corrosion resistance of mixed phosphonic acid monolayers on AA 2024

Mixed monolayers were used to prepare surfaces of AA 2024 with precisely controlled corrosion protective and adhesive properties. In this study, the corrosion inhibition and adhesion promotion as a function of the composition of mixed phosphonic acid monolayers on AA 2024 was investigated. Mixed monolayers were formed by competitive adsorption of n-dodecylphosphonic acid (DPA) and 12-aminododecylphosphonic acid (ADPA) from ethanolic solution. Their compositions were determined by X-ray photoelectron spectroscopy. Atomic force microscopy studies and polarization modulation infrared reflection–absorption spectroscopy as well as contact angle studies proved the formation of monolayers with varying surface chemistry. The wet-adhesion strength was tested by 90° peel tests after application of an epoxy-amine adhesive. Linear sweep voltammetry was performed to evaluate the corrosion inhibition of the monolayers, and the corrosion resistance of the metal/adhesive composite was investigated by means of its corrosive delamination behavior. The electrochemical measurements demonstrated that reducing the surface concentration of ADPA improved the corrosion inhibition of the monolayer. However, the corrosive delamination experiments revealed that the improved corrosion inhibition by the self-organized DPA is of minor importance for the corrosion behavior of the metal/adhesive composite, as the adhesive properties dominate.

Programmable Lanthanide Metal-Organic Framework for Ultra-Efficient Nucleic Acids Extraction and Interaction Analysis.

Efficient, mild, and reversible adsorption of nucleic acids onto nanomaterials represents a promising analytical approach for medical diagnosis. However, there is a scarcity of efficient and reversible nucleic acid adsorption nanomaterials. Additionally, the lack of comprehension of the molecular mechanisms governing their interactions poses significant challenges. These issues hinder the rational design and analytical applications of the nanomaterials. Herein, we propose an ultra-efficient nucleic acid affinity nanomaterial based on programmable lanthanide metal-organic frameworks (Ln-MOFs). Through experiments and density functional theory calculations, a rational design guideline for nucleic acid affinity of Ln-MOF was proposed, and a modular and flexible preparation scheme was provided. Then, Er-TPA (terephthalic acid) MOF emerged as the optimal candidate due to its pore size-independent adsorption and desorption capabilities for nucleic acids, enabling ultra-efficient adsorption (about 150% mass ratio) within 1 min. Furthermore, we elucidate the molecular-level mechanisms underlying the Ln-MOF adsorption of single- and double-stranded DNA and G4 structures. The affinity nanomaterial based on Ln-MOF exhibits robust nucleic acid extraction capability (4-fold higher than commercial reagent kits) and enables mild and reversible CRISPR/Cas9 functional regulation. This method holds significant promise for broad application in DNA/RNA liquid biopsy and gene editing, facilitating breakthroughs in analytical chemistry, pharmacy, and medical research.

Phytic Acid-Functional Cellulose Nanocrystals and Their Application in Self-Healing Nanocomposite Hydrogels.

Cellulose nanocrystals (CNCs) have garnered significant attention as a modifiable substrate because of their exceptional performances, including remarkable degradability, high tensile strength, high elastic modulus, and biocompatibility. In this article, the successful adsorption of phytic acid (PA) onto the surface of cellulose nanocrystals @polydopamine (CNC@PDA) was achieved. Taking inspiration from mussels, a dopamine self-polymerization reaction was employed to coat the surface of CNCs with PDA. Utilizing Pickering emulsion, the CNC@PDA-PA nanomaterial was obtained by grafting PA onto CNC@PDA. An environmentally friendly hydrogel was prepared through various reversible interactions using poly(acrylic acid) (PAA) and Fe3+ as raw materials with the assistance of CNC@PDA-PA. By multiple hydrogen bonding and metal-ligand coordination, nanocomposite hydrogels exhibit remarkable mechanical properties (the tensile strength and strain were 1.82 MPa and 442.1%, respectively) in addition to spectacular healing abilities (96.6% after 5 h). The study aimed to develop an innovative approach for fabricating nanocomposite hydrogels with exceptional self-healing capabilities.

High surface area biochar for the removal of naphthenic acids from environmental water and industrial wastewater.

This study reports the production of biochar adsorbents from two major crop residues (i.e., rice and wheat straw) to remove naphthenic acids from water. The alkali treatment approach was used for biochar activation that resulted in a tremendous increase in their surface area, i.e., up to 2252 and 2314 m2/g, respectively, for rice and wheat straw biochars. Benzoic acid was used as a model compound to optimize critical adsorption parameters. Its maximum monolayer adsorption capacity of 459.55 and 357.64mg/g was achieved for activated rice and wheat straw biochars. The adsorption of benzoic acid was exothermic (∆H° = - 7.06 and - 3.89kJ/mol) and identified possibly as physisorption (Gibbs free energy ranges 3.5-4.0kJ/mol). The kinetic study suggested that adsorption follows pseudo-second-order kinetics with qe2 for rice straw and wheat straw-derived adsorbents at 200 and 194mg/g, respectively. As adsorbent, the recyclability of activated biochars was noticed with no significant loss in their efficiency for up to ten successive regeneration cycles. The adsorption results were validated using a commercial naphthenic acid mixture-spiked river water and paper/pulp industrial effluent. The activated rice and wheat straw biochars exhibited excellent adsorption efficiency of 130.3 and 74.6mg/g, respectively. The naphthenic acid adsorption on biochar surface was due to various interactions, i.e., weak van der Waal's, pore filling, π-π stacking, and ionic interactions. This study offers a cost-effective and eco-friendly approach to valorizing agricultural residues for pollutant removal from industrial wastewater, including petroleum refineries.

Adsorption, Orientation, and Speciation of Amino Acids at Air-Aqueous Interfaces for the Direct Air Capture of CO2.

Amino acids make up a promising family of molecules capable of direct air capture (DAC) of CO2 from the atmosphere. Under alkaline conditions, CO2 reacts with the anionic form of an amino acid to produce carbamates and deactivated zwitterionic amino acids. The presence of the various species of amino acids and reactive intermediates can have a significant effect on DAC chemistry, the role of which is poorly understood. In this study, all-atom molecular dynamics (MD) based computational simulations and vibrational sum frequency generation (vSFG) spectroscopy studies were conducted to understand the role of competitive interactions at the air-aqueous interface in the context of DAC. We find that the presence of potassium bicarbonate ions, in combination with the anionic and zwitterionic forms of amino acids, induces concentration and charge gradients at the interface, generating a layered molecular arrangement that changes under pre- and post-DAC conditions. In parallel, an enhancement in the surface activity of both anionic and zwitterionic forms of amino acids is observed, which is attributed to enhanced interfacial stability and favorable intermolecular interactions between the adsorbed amino acids in their anionic and zwitterionic forms. The collective influence of these competitive interactions, along with the resulting interfacial heterogeneity, may in turn affect subsequent capture reactions and associated rates. These effects underscore the need to consider dynamic changes in interfacial chemical makeup to enhance DAC efficiency and to develop successful negative emission and storage technologies.

Differential immobilization of cadmium and changes in soil surface charge in acidic Ultisol by chitosan and citric acid: effect of their functional groups.

Soil organic matter plays an important role in cadmium adsorption and immobilization. Since different organic matter components affect cadmium adsorption processes differently, selecting the right organic substrate and knowing how to apply it could improve cadmium remediation. This study compares the effects of two contrasting organic molecules; chitosan and citric acid, on cadmium adsorption and speciation in acidic Ultisol. The adsorption of chitosan to Ultisol significantly increased the soil positive charge while adsorption of citric acid increased the soil negative charge. At pH 5.0, the maximum amount of cadmium adsorbed in excess chitosan was 341% greater than that in excess citric acid. About 73-89% and 60-62% of adsorbed cadmium were bound to Fe/Mn oxides and organic matter/sulfide at pH 4.0 while this fraction was 77-100% and 57-58% for citric acid and chitosan at pH 5.0, respectively. This decrease in the complexing ability of chitosan was related to the destabilizing effect of high pH on chitosan's structure. Also, the sequence through which chitosan, citric acid, and cadmium were added into the adsorption system influenced the adsorption profile and this was different along a pH gradient. Specifically, adding chitosan and cadmium together increased adsorption compared to when chitosan was pre-adsorbed within pH 3.0-6.5. However, for citric acid, the addition sequence had no significant effect on cadmium adsorption between pH 3.0-4.0 compared to pH 6.5 and 7.5, with excess citric acid generally inhibiting adsorption. Given that the action of citric acid is short-lived in soil, chitosan could be a good soil amendment material for immobilizing cadmium.

Synergistic adsorption and singlet oxygenation of humic acid on alkali-activated biochar via peroxymonosulfate activation

Synergistic adsorption and singlet oxygenation of humic acid on alkali-activated biochar via peroxymonosulfate activation

In Ukrainian

An important environmental problem is the removal of contaminants and the purification of domestic and industrial water from pollutants of various nature. There is a separate issue of cleaning the effluents of pharmaceutical enterprises. Various chemical and physical methods are used to solve these problems, such as settling, coagulation, filtration, and sorption techniques. Adsorption with using efficient and reusable adsorbents is the most effective and cheap. In recent years special attention has been paid to the use of sorption materials based on hydrolysis lignin, which has a high sorption activity in relation to ions of some heavy metals, dyes, organic compounds and pharmaceuticals. The use of lignin as an adsorbent simultaneously solves two problems: the disposal of paper production waste and the purification of sewage from various types of pollutants. The aim of this work was to study the sorption properties of hydroylysis lignin in aqueous solution in relation to some medical substances of different chemical nature, existing in solution in cationic, anionic or neutral forms. The point of zero charge of hydrolysis lignin was determined, which is equal to рНPZC = 4.95. The adsorption of rivanol, proflavin, doxorubicin, levofloxacin, furacilin, and salicylic acid by hydrolysis lignin was studied as dependence on the pH of the solutions and the concentration of adsorbates. It was found that adsorption largely depends on the structure of the pharmaceuticals and the pH values of the solutions. It is shown that the studied medical compounds, which exist in the solution in the form of cations, are adsorbed the best (rivanol, proflavin, doxorubicin). Adsorption of these substances occurs mainly due to electrostatic interaction with negatively charged surface groups. Adsorption of anionic form (salicylic acid) is the smallest and is observed only at quite low pH values. Levofloxacin is adsorbed mainly in the form of zwitter ions, and furacilin is in neutral form. The adsorption of these both compounds occupies an intermediate value of adsorption amount. The obtained adsorption isotherms are well lined up in Langmuir coordinates. Quantitative parameters of adsorption values - of maximum adsorption and equilibrium constants were calculated. Quite high values of these parameters indicate that hydrolysis lignin can be used as an adsorbent for the removal of these pharmaceuticals.

Regulation and synthesis of metal–organic frameworks through mixed-ligand strategy: A pathway to enhance adsorption of perfluoroalkyl acids

Metal-organic frameworks (MOFs) have been regarded as extremely promising adsorbent materials, with the repetitive coordination assembly of inorganic metal ions and organic ligands constituting their reticular structure and abundant pores. Herein, a ligand mixing approach to synthesizing and regulating MOFs is provided. By mixing multiple solvents and adding modifiers, imidazole-based linkers can be prepared MOFs with mixed ligand components at room temperature. In this study, we prepared four mixed-ligand MOFs: Zn(aIM + bIM), Zn(mIM + bIM), Zn(aIM + mIM), and Zn(mIM + 2-mbIM). Series of characterizations by SEM, XRD, NMR, etc. confirmed the successful preparation of mixed-ligand MOFs, and they exhibited the different surface areas, pore sizes, and surface properties. And the adsorption capabilities for perfluoroalkyl acids (PFAAs) were compared among the prepared MOFs adsorbents. Among them, Zn(aIM + bIM) consisting of benzimidazole and imidazole-2-formaldehyde linker possessed the optimum adsorption performance, with an equilibrium adsorption capacity qe of 245 mg/g for perfluorobutyric acid, and the calculated maximum adsorption capacity qm of 439 mg/g. And for the other chain lengths of perfluoroalkyl acids, the adsorption results are also acceptable. The potential adsorption mechanism and the reasons for the performance enhancement are discussed based on relevant characterization and simulation. It was proved that the ligand mixing strategy can provide new insights into the development of high-performance MOFs adsorbents for addressing environmental concerns.

In Ukrainian

The paper discusses the results of saponite research from the Tashkiv deposit of Ukraine. X-ray structural analysis proved the necessity of preliminary cleaning of saponites from mineral impurities. The study of the morphology, nanoprofile and topography of the surface of saponite by the methods of SEM-microscopy and Atomic Force Microscopy revealed that the mineral is represented by aggregates of nano- and microparticles of a pyramidal shape. Its characteristic feature is the heterogeneity of isomorphic substitutions of ions in the tetrahedral and octahedral sheets of the structural elementary package. According to X-ray fluorescence analysis, saponite contains a significant amount of Fe3+, which isomorphically replaces magnesium Mg2+ and, accordingly, is located mastly in the octahedral sheet of the structural package with a charge from +0.37 to +0.35. The number and mechanism of isomorphic substitutions determine the presence of a total negative charge of the crystal lattice (from –0.38 to –0.3), the value of which ensures intensive interaction with water molecules of the interpacket space with the formation of surface OH groups. Accordingly, both acidic and alkaline Lewis and Brønsted centers are present on the surface with a predominance of acidic ones, so the acidity function is 5.82, and the point of zero proton charge is pH = 5.5. During dispersion in water, a part of the alkaline centers of the side surface are transformed into Brønsted acid centers as a result of their protonation, which causes an increase in the pH of the dispersion medium to pH = 8–8.6. Accordingly, the isoionic state is reached at pH = 7.5. The difference in pH values characterizing the isoionic state of the surface and the point of zero net proton charge (PZNPC) indicates the presence of weak acid-alkaline centers on the surface. The study of the adsorption of acid-alkaline dyes showed the adsorption of alkaline (pK = 1¸3) and acid (pK = 7¸14) dyes on saponites. The latter is significantly reduced due to the preliminary hydration of the solid surface - mainly the lateral edges of the particles. Acidic dyes are not adsorbed from a dispersion medium with pH < 5.5 (PZNPC), and basic dyes are adsorbed at pH > 5,5( PZNPC).

Highly Efficient Cationic Surfactant Functionalized Alginate Hydrogel for Perfluorooctanoic Acid Adsorption: Optimization through Response Surface Methodology and Performance Evaluation for Aqueous Media

Highly Efficient Cationic Surfactant Functionalized Alginate Hydrogel for Perfluorooctanoic Acid Adsorption: Optimization through Response Surface Methodology and Performance Evaluation for Aqueous Media

Comprehensive batch studies on removal of fluoride from aqueous solution by acid and alkali-activated adsorbents prepared from Dal lake weeds: Mechanism, Kinetics and Thermodynamics

An efficient and economical way of eliminating fluoride from water is being investigated by employing the buoyant aquatic plant (Dal weed). Two post-pyrolysis chemical activation alteration techniques were implemented: acidic activation by employing sulfuric acid (H-activation) and alkaline activation using sodium hydroxide (OH-activation). The batch kinetic studies have been carried out considering varying starting fluoride levels such as 2–10 mg/L. The impact of diverse procedural factors, including dosage of Dal weed, starting fluoride level, pH and contact duration was observed to determine their influence on fluoride adsorption kinetics. Based on analyzed exploratory results, removal efficacy of 63% for the OH-activated carbon and 83% for H-activated carbon was achieved at commencing fluoride level of 10 mg/L, adsorbent dosage of 0.8 g, at 25 °C after 120 min. The maximal fluoride uptake capacity for H-activated carbon was observed to be 78.158 mg/g. Kinetic investigations showed that the Freundlich isotherm model provided a satisfactory match with an R2 value of 0.99. The reaction order nature adhered to kinetics resembling pseudo second order. Thermodynamic investigation revealed endothermic sorption, with negative ΔG indicating spontaneous fluoride uptake. In comparison, the positive number for ΔS suggested random behavior at the contact involving the adsorbent and adsorbate. The investigations into the regeneration capabilities of the adsorbent material revealed that even after undergoing for five consecutive cycles of adsorption and regeneration, the adsorbent exhibited an uptake potential of 45%. The presence of competing ions in the solution negatively impacted defluoridation efficacy, with the influence following the order of HCO3−< NO3−< Cl−< SO42−< PO43−.

Equilibrium and Kinetic Studies on Adsorption of Neutral and Ionic Species of Organic Adsorbates from Aqueous Solutions on Activated Carbon.

This work presents comprehensive studies of the adsorption of neutral and ionic forms of organic adsorbates from aqueous solutions on activated carbon. The influence of pH on the equilibrium and kinetics of the adsorption of methylene blue (MB) and organic acids, benzoic (BA), 2-nitrobenzoic (2-NBA), 3-nitrobenzoic (3-NBA), and 4-nitrobenzoic (4-NBA) acid, was investigated. Experimental adsorption isotherms were analyzed using the generalized Langmuir isotherm equation (R2 = 0.932-0.995). Adsorption rate data were studied using multiple adsorption kinetics equations, of which the multi-exponential equation gave the best fit quality (R2 - 1 = (6.3 × 10-6)-(2.1 × 10-3)). The half-time was also used to represent the effect of pH on adsorption kinetics. Strong dependences of the adsorption efficiency on the solution pH were demonstrated. In the case of organic acid adsorption, the amount and rate of this process increased with a decrease in pH. Moreover, larger adsorbed amounts of methylene blue were recorded in an alkaline environment in a relatively short time. The maximum absorbed amounts were 11.59 mmol/g, 6.57 mmol/g, 9.38 mmol/g, 2.70 mmol/g, and 0.24 mmol/g for BA, 2NBA, 3-NBA, 4-NBA, and MB. The pure activated carbon and the selected samples after adsorption were investigated using thermal analysis and X-ray photoelectron spectroscopy.