Morphology Of Adipose-derived Stem Cells Research Articles

Molecular imprinting as a simple way for the long-term maintenance of the stemness and proliferation potential of adipose-derived stem cells: an in vitro study.

Cells are smart creatures that respond to every signal after isolation and in vitro culture. Adipose-derived stem cells (ADSCs) gradually lose their characteristic spindle shape, multi-lineage differentiation potential, and self-renewal ability, and enter replicative senescence after in vitro expansion. This loss of cellular function is a serious impediment to clinical applications that require huge numbers of cells. It has been proven that substrates with cell imprints can be applied for stem cells' differentiation into desired cells or to re-culture any cell type while maintaining its ordinary activity. This study demonstrated the application of cell-imprinted substrates as a novel method in the long-term expansion of ADSCs while maintaining their stemness. Here we used molecular imprinting of stem cells as a physical signal to maintain stem cells' stemness. First, ADSCs were isolated and cultured on the tissue culture plate. Then, cells were fixed, and stem cell-imprinted substrates were fabricated using PDMS. Afterward, ADSCs were cultured on these substrates and subjected to osteogenic and adipogenic differentiation signals. The results were compared with ADSCs cultured on a polystyrene tissue culture plate and non-patterned PDMS. Morphology analysis with optical and fluorescence microscopy and SEM images illustrated that ADSCs seeded on imprinted substrates kept ADSC morphology. Alizarin Red S and Oil Red O staining, flow cytometry, and qPCR results showed that ADSC-imprinted substrates could reduce the differentiation of stem cells in vitro even if the differentiating stimulations were applied. Also, cell cycle analysis revealed that ADSCs could maintain their proliferation potential. So this method can maintain stem cells' stemness for a long time and reduce the unwanted stem cell differentiation that occurs in conventional cell culture on tissue culture plates.

3D Bioprinting of Human Adipose-Derived Stem Cells and Their Tenogenic Differentiation in Clinical-Grade Medium.

Defining the best combination of cells and biomaterials is a key challenge for the development of tendon tissue engineering (TE) strategies. Adipose-derived stem cells (ASCs) are ideal candidates for this purpose. In addition, controlled cell-based products adherent to good manufacturing practice (GMP) are required for their clinical scale-up. With this aim, in this study, ASC 3D bioprinting and GMP-compliant tenogenic differentiation were investigated. In detail, primary human ASCs were embedded within a nanofibrillar-cellulose/alginate bioink and 3D-bioprinted into multi-layered square-grid matrices. Bioink viscoelastic properties and scaffold ultrastructural morphology were analyzed by rheology and scanning electron microscopy (SEM). The optimal cell concentration for printing among 3, 6 and 9 × 106 ASC/mL was evaluated in terms of cell viability. ASC morphology was characterized by SEM and F-actin immunostaining. Tenogenic differentiation ability was then evaluated in terms of cell viability, morphology and expression of scleraxis and collagen type III by biochemical induction using BMP-12, TGF-β3, CTGF and ascorbic acid supplementation (TENO). Pro-inflammatory cytokine release was also assessed. Bioprinted ASCs showed high viability and survival and exhibited a tenocyte-like phenotype after biochemical induction, with no inflammatory response to the bioink. In conclusion, we report a first proof of concept for the clinical scale-up of ASC 3D bioprinting for tendon TE.

3D co-culture model of endothelial colony-forming cells (ECFCs) reverses late passage adipose-derived stem cell senescence for wound healing

BackgroundExtensive passage of adipose-derived stem cells (ASCs) in vitro leads to loss of function. Endothelial colony-forming cells (ECFCs) can be isolated from adult peripheral blood. A 3D co-culture system may rescue in vitro ASC senescence.MethodsA 3D co-culture model was successfully established using hyaluronic acid (HA) gel and a 10:1 ratio of late-passage ASCs and ECFCs. Cell density and culture conditions were optimized. Stem cell phenotype was characterized by flow cytometry. ELISA was used to measure the trophic effect of angiogenic growth factors and compare the effects of these factors between the 3-D co-culture and single-cell culture. Therapeutic potential of ASC/ECFC 3-D co-cultures was evaluated in a mouse chronic injury model.ResultsFollowing incubation in a HA substrate 3D co-culture system, ASC morphology, phenotype, secretory profile, and differentiation capacity were restored. The ASC/ECFC co-culture increased the secretion of cytokines, such as hepatocyte growth factor, compared with single-cell 3D culture or monolayer culture. Mice radiation-ulcer wounds treated with ASC/ECFC 3-D co-cultures (spheroids) showed epithelialization and improved healing compared with wounds treated with ASCs or ECFCs alone. Further, transplanted ASC/ECFC spheroids exhibited superior angiogenic potential due to the ability of the ASCs to transdifferentiate into pericytes.Conclusion3D co-culture of ECFCs and ASCs in vitro restored native ASC properties by reversing cellular senescence and loss of trophic function. Transplant of ASC/ECFC 3D spheroids in vivo demonstrated pro-angiogenic capacity with improved therapeutic potential.

The Effect of Human Platelet-Rich Plasma and L-Ascorbic Acid on Morphology, Proliferation, and Chondrogenesis Ability towards Human Adipose-Derived Stem Cells

Background: Microtia is a congenital malformation in the external ear due to cartilage defect. Adipose-derived stem cells (ADSC) is promising cells to develop cartilage tissue engineering for microtia. In this study, we focused on proliferation and chondrogenesis of ADSC in three different media, which consist of 10% fetal bovine serum (FBS), 10% FBS with L-ascorbic acid, and 10% human platelet rich plasma (PRP). Methods: ADSC were induced to differentiate into adipocytes, chondrocyte and osteocytes. ADSC morphology, proliferation and population doubling time was compared in three different media and analysed. Observation and alcian blue staining were done every 7 days to assess chondrogenic potency of ADSC from each treatment.Results: Isolated ADSC were able to differentiate into adipocytes, osteocytes and chondrocytes. ADSC in all group have fibroblast-like morphology, but cells in 10% FBS and 10% FBS with LAA group were flattened and larger. ADSC in 10% PRP group proliferates faster than 10% FBS with and without LAA. PDT values of ADSC were 34 hours, 44 hours and 48 hours, respectively for 10% PRP, 10% FBS with LAA and 10% FBS group. Alcian blue staining revealed that ADSC in 10% FBS with LAA and 10% PRP were able to proceed to chondrogenesis when cultured time were prolong up to 21 days, but not with ADSC in 10% FBS. Conclusion: We conclude that adding 10% FBS with LAA or 10% PRP into medium culture can support proliferation and chondrogenesis of ADSC. Key words: human ADSC, PRP, L-ascorbic acid, proliferation, chondrogenesis

Cross-linking of a biopolymer-peptide co-assembling system

Molecular self-assembly is widely used for the fabrication of complex functional biomaterials to replace and/or repair any tissue or organ in the body. However, maintaining the stability and corresponding functionality of these kinds of materials in physiological conditions remains a challenge. Chemical cross-linking strategies (natural or synthetic) have been used in an effort to improve their structural integrity. Here we investigate key performance parameters of different cross-linking strategies for stabilising self-assembled materials with potential biomedical applications using a novel protein-peptide co-assembling membrane as proof-of-concept. From the different cross-linkers tested, the natural cross-linker genipin exhibited the best performance. This cross-linker successfully enhanced the mechanical properties of the system enabling the maintenance of the structure in physiological conditions without compromising its bioactivity and biocompatibility. Altogether, we provide a systematic characterization of cross-linking alternatives for self-assembling materials focused on biocompatibility and stability and demonstrate that genipin is a promising alternative for the cross-linking of such materials with a wide variety of potential applications such as in tissue engineering and drug delivery.

Effects of uniaxial cyclic stretch loading on morphology of adipose derived stem cells.

Adipose derived stem cells (ADSC) are good candidates for the replacement of bone marrow derived mesenchymal stem cells due to their abundance, multipotency property, and easier accessibility. In order to explore the behavior of these cells in response to mechanical stimulation, in this study we have investigated the effects of uniaxial dynamic mechanical loading on ADSC's morphology. Stem cells derived from the fat tissue of human and after an overnight culture were seeded on a silicone rubber strips. Afterwards, cells were subjected to a uniaxial dynamic loading in three different groups. Cell images were evaluated considering different morphological parameters. Fractal dimension decreased significantly after loading while in control groups there were a significant increase (p<0.05), approving that cyclic strain would lead to more aligned and organized cells. Cell orientation also increased significantly (p<0.05). Moreover cells' orientation angle, 24 hour after loading does not change compared to the observations immediately after loading, which attests to the practicality of the cyclic strain in functional tissue engineering. Cell width decreased and cell length increased which led to a significant increase in cell shape index (p<0.05). Results confirmed that uniaxial dynamic loading affects cell morphological parameters comparing their values before and after loading. In addition, the number of cycles are also an important factor since different number of cycles lead to different amounts of certain morphological parameters. Conclusively, cyclic strain can be a practical method in the field of functional tissue engineering.

Effects of hypergravity on adipose-derived stem cell morphology, mechanical property and proliferation

Alteration in specific inertial conditions can lead to changes in morphology, proliferation, mechanical properties and cytoskeleton of cells. In this report, the effects of hypergravity on morphology of Adipose-Derived Stem Cells (ADSCs) are indicated. ADSCs were repeatedly exposed to discontinuous hypergravity conditions of 10 g, 20 g, 40 g and 60 g by utilizing centrifuge (three times of 20 min exposure, with an interval of 40 min at 1 g). Cell morphology in terms of length, width and cell elongation index and cytoskeleton of actin filaments and microtubules were analyzed by image processing. Consistent changes observed in cell elongation index as morphological change. Moreover, cell proliferation was assessed and mechanical properties of cells in case of elastic modulus of cells were evaluated by Atomic Force Microscopy. Increase in proliferation and decrease in elastic modulus of cells are further results of this study. Staining ADSC was done to show changes in cytoskeleton of the cells associated to hypergravity condition specifically in microfilament and microtubule components. After exposing to hypergravity, significant changes were observed in microfilaments and microtubule density as components of cytoskeleton. It was concluded that there could be a relationship between changes in morphology and MFs as the main component of the cells.

Adhesion of adipose-derived mesenchymal stem cells to glycosaminoglycan surfaces with different protein patterns.

Proteins and glycosaminoglycans (GAGs) are the main constituents of the extracellular matrix (ECM). They act in synergism and are equally critical for the development, growth, function, or survival of an organism. In this work, we developed surfaces that display these two classes of biomacromolecules, namely, GAGs and proteins, in a spatially controlled fashion. The generated surfaces can be used as a minimalistic but straightforward model aiding the elucidation of cell-ECM interactions. GAGs (hyaluronic acid and heparin) were covalently bound to amino functionalized surfaces, and albumin or fibronectin was patterned by microcontact printing on top of them. We demonstrate that adipose-derived stem cells (ASCs) can adhere either on the protein or on the GAG pattern as a function of the patterned molecules. ASCs found on the GAG pattern had different morphology and expressed different surface markers than the cells adhered on the protein pattern. ASCs morphology and spreading were also dependent on the size of the pattern. These results show that the developed supports can also be used for ASCs differentiation into different lineages.

Interactions between Exogenous FGF-2 and Sulfonic Groups: in Situ Characterization and Impact on the Morphology of Human Adipose-Derived Stem Cells

FGF-2 is often used as a supplement to stem cells culture medium aiming at preserving their self-renewal capacity and plasticity through the passages. However, little is known on the influence of the underlying substrate in these interactions. In this study, we have used mixed self-assembled monolayers with different ratios of -SO3H and -OH tail groups to investigate the influence of substrate properties (e.g., charge) on the FGF-2 adsorption and activity. QCM-D data demonstrated that, in the presence of -OH groups, the quantity of the adsorbed FGF-2 is proportional to the percentage of surface -SO3H groups. The bioactivity of the adsorbed FGF-2 follows the same tendency as demonstrated by its interactions with anti-FGF-2. Surprisingly, the adlayer of FGF-2 formed on the surface containing only SO3H-tailed SAMs was similar to the surface with 25% of -SO3H groups, demonstrating that FGF-2 adsorption is not solely driven by electrostatic interactions. We related these results with changes in the morphology of adipose-derived stem cells (ASCs) cultured on the same surfaces.

Evaluation of gold nanotracers to track adipose-derived stem cells in a PEGylated fibrin gel for dermal tissue engineering applications

Evaluating the regenerative capacity of a tissue-engineered device in a noninvasive and synchronous manner is critical to determining the mechanisms for success in clinical applications. In particular, directly tracking implanted cells in a three-dimensional (3D) scaffold is desirable in that it enables the monitoring of cellular activity in a specific and localized manner. The authors’ group has previously demonstrated that the PEGylation of fibrin results in a 3D scaffold that supports morphologic and phenotypic changes in mesenchymal stem cells that may be advantageous in wound healing applications. Recently, the authors have evaluated adipose-derived stem cells (ASCs) as a mesenchymal cell source to regenerate skin and blood vessels due to their potential for proliferation, differentiation, and production of growth factors. However, tracking and monitoring ASCs in a 3D scaffold, such as a PEGylated fibrin gel, have not yet been fully investigated. In the current paper, nanoscale gold spheres (20 nm) as cell tracers for ASCs cultured in a PEGylated fibrin gel were evaluated. An advanced dual-imaging modality combining ultrasound and photoacoustic imaging was utilized to monitor rat ASCs over time. The ASCs took up gold nanotracers and could be detected up to day 16 with high sensitivity using photoacoustic imaging. There were no detrimental effects on ASC morphology, network formation, proliferation, and protein expression/secretion (ie, smooth muscle α-actin, vascular endothelial growth factor, matrix metalloproteinase-2, and matrix metalloproteinase-9) associated with gold nanotracers. Therefore, utilization of gold nanotracers can be an effective strategy to monitor the regenerative process of a stem cell source in a 3D gel for vascular and dermal tissue engineering applications.

The Impact of Long-Term In Vitro Expansion on the Senescence-Associated Markers of Human Adipose-Derived Stem Cells

Human adipose-derived stem cells (ASCs) have generated a great deal of excitement in regenerative medicine. However, their safety and efficacy issue remain a major concern especially after long-term in vitro expansion. The aim of this study was to investigate the fundamental changes of ASCs in long-term culture by studying the morphological feature, growth kinetic, surface marker expressions, expression level of the senescence-associated genes, cell cycle distribution and ß-galactosidase activity. Human ASCs were harvested from lipoaspirate obtained from 6 patients. All the parameters mentioned above were measured at P5, P10, P15 and P20. Data were subjected to one-way analysis of variance with a Tukey post hoc test to determine significance difference (P < 0.05). The data showed that growth of ASCs reduced in long-term culture and the ß-galactosidase activity was significantly increased at later passage (P20). The morphology of ASCs in long-term culture showed the manifestation of senescent feature at P15 and P20. Significant alteration in the senescence-associated genes expression levels was observed in MMP1, p21, Rb and Cyclin D1 at P15 and P20. Significant increase in CD45 and HLA DR DQ DP surface marker was observed at P20. While cell cycle analysis showed significant decrease in percentage of ASCs at S and G2/M phase at later passage (P15). Our data showed ASCs cultured beyond P10 favours the senescence pathway and its clinical usage in cell-based therapy may be limited.

Schwann cells induced neuronal differentiation of adipose-derived stem cells (ADSCs)

Objective To investigate the function of SD rats Schwann cells on the growth and differentiation of adipose-derived stem cells(ADSCs) when they are co-cultured in Transwell culture system. Methods The ADSCs harvested from SD rats were divided into 3 groups. Group A: ADSCs and Schwann cells were cultured in Transwell indirect co-culture system. Group B: ADSCs were induced by β-BME and BHA. Group C: a contrast group. The morphology of ADSCs was observed and immunohistology was pedormed. Results ADSCs of group A and group B were partly differentiated to the cells which had long neurite,and had a positive result in the NF staining, but negative in the GFAP staining. Group A shows no great difference in neurite length compared with group B(P < 0.05), and no great difference in cell quantity compared with group C (P < 0.05). Conclusion Schwann cells of SD rat have a growth supportive and neuronal differentiation inducing effect on ADSCs. Key words: Schwann cell; Adipose-derived stem cells; Neural differentiation

Leporine-Derived Adipose Precursor Cells Exhibit In Vitro Osteogenic Potential

Adipose-derived stem cells (ASCs) possess osteogenic potential and have been shown to undergo in vitro osteoblastic differentiation and promote bone regeneration in vivo. In this study, we describe the isolation and osteoblastic differentiation of rabbit ASCs and their behavior on a gelatin foam scaffold. These studies will form the basis of future in vivo studies of the osteogenic potential of rabbit ASCs for calvarial defect repair.Adipose-derived stem cells were isolated from New Zealand White rabbits and cultured in osteogenic medium +/- bone morphogenetic protein 2. Osteoblastic differentiation was assessed via histochemical stains for alkaline phosphatase (AP) and extracellular matrix (ECM) calcification. Reverse transcriptase polymerase chain reaction was performed to evaluate the expression of AP and the osteogenic transcription factor Runx2. Adipose-derived stem cells were seeded onto gelatin foam scaffolds at various densities, and cell proliferation was measured fluorometrically. Cells isolated from rabbit adipose tissue exhibited classic ASC morphology. Adipose-derived stem cells cultured in osteogenic medium exhibited more robust staining for AP and ECM calcification compared with ASCs in control medium. Furthermore, this staining was more marked in male ASCs versus female ASCs and also enhanced by bone morphogenetic protein 2. mRNA for AP and Runx2 were also increased in the osteoinduced cells. Theoptimal seeding density was 1 x 10 ASCs on an 8-mm gelatin foam scaffold. We have shown that rabbit ASCs have in vitro osteogenic potential and are compatible with a gelatin foam scaffold. Characteristic features of osteoblasts, such as ECM mineralization and expression of osteogenic genes, were demonstrated in this cell population. In vitro osteoblastic differentiation and scaffold studies are necessary before in vivo trials. The mechanism underlying the sex-based variation in osteoblastic differentiation is unknown but may involve signaling via factors such as estrogen.

Effects of uniaxial cyclic strain on adipose-derived stem cell morphology, proliferation, and differentiation

Cells and tissues in vivo are subjected to various forms of mechanical forces that are essential to their normal development and functions. The arterial blood vessel wall is continuously exposed to mechanical stresses such as pressure, strain, and shear due to the pulsatile nature of blood flow. Vascular smooth muscle cells (SMCs) populate the media of blood vessels and play important roles in the control of vasoactivity and the remodeling of the vessel wall. It is well documented that the phenotype and functions of vascular SMCs are not only regulated by chemical factors such as transforming growth factor-beta(1) (TGF-beta(1)), but also by mechanical factors such as uniaxial strain. The purpose of our study was to explore the effects of TGF-beta(1) alone or in combination with uniaxial cyclic strain on adipose-derived stem cell (ASC) morphology, proliferation, and differentiation. Low passage ASCs were stimulated with 10% strain at 1 Hz for 7 days, with or without TGF-beta(1). Cyclic strain inhibited proliferation, and caused alignment of the cells and of the F-actin cytoskeleton perpendicular to the direction of strain. Strain alone resulted in a decrease in the expression of early SMC markers alpha-SMA and h (1)-calponin. While the response of SMCs and other progenitor cells such as bone marrow stromal cells to mechanical forces has been extensively studied, the roles of these forces on ASCs remain unexplored. This work advances our understanding of the mechanical regulation of ASCs.