Adhesion Process Research Articles

Differential Expression Profiles and Bioinformatics Analysis of tRNA-derived Small RNAs in Epicardial fat of Patients with Atrial Fibrillation

The exact processes underlying atrial fibrillation (AF) are still unclear. It has been suggested that epicardial adipose tissue (EAT) may contribute to arrhythmias and can release various bioactive molecules, including exosomes containing tRNA-derived small RNAs (tsRNAs). Numerous studies have indicated that these tsRNAs can significantly affect key cellular functions. However, there is currently no research investigating the relationship between tsRNAs from EAT and AF. In order to explore the regulatory mechanisms of tsRNAs from EAT associated with AF, we conducted RNA-sequencing analysis on EAT samples collected from 6 AF patients and 6 control subjects with sinus rhythm. Our analysis revealed an upregulation of 146 tsRNAs and a downregulation of 126 tsRNAs in AF. Furthermore, we randomly selected four tsRNAs (tRF-SeC-TCA-001, tiRNA-Gly-CCC-003, tRF-Gly-GCC-002, and tRF-Tyr-GTA-007) for validation using quantitative reverse transcription-polymerase chain reaction. Following this, bioinformatic analyses revealed that the target genes of these tsRNAs were prominently involved in the regulation of cell adhesion and various cellular processes mediated by plasma membrane adhesion molecules. Additionally, based on KEGG analysis, it was suggested that the majority of these target genes might contribute to the pathogenesis of AF through processes such as glycosaminoglycan biosynthesis, AMP-activated protein kinase activity, and the insulin signaling pathway. Our results elucidate changes in the expression profiles of tsRNAs within EAT samples obtained from AF patients, and they forecast potential target genes and interactions between tsRNAs and mRNA within EAT that could contribute to the pathogenesis of AF.

ВИЗУАЛИЗАЦИЯ ПЕРИТОНЕАЛЬНОГО МЕТАСТАЗИРОВАНИЯ: ОБЗОР ЛИТЕРАТУРЫ И СОБСТВЕННЫЙ ОПЫТ

Peritoneal metastasis is typical for malignant neoplasms of the ovary, stomach, intestines and other localizations. Metastases can mimic other pathological changes. Ambiguous conclusions about the effectiveness of certain methods of visualization and differentiation of peritoneal metastasis given in the scientific literature explain the lack of a unified approach in its diagnosis. Imaging of the peritoneum directly impacts tumor burden assessment, prognosis, and treatment planning. Purpose of the study: to analyze the information content of modern methods of visualizing peritoneal metastasis, based on literature data and our own experience. Materials and methods. The study was carried out on the basis of a literature analysis of publications of the electronic search system PubMed. We also conducted our own research on the comparative effectiveness of visualization methods implemented in the conditions of the Republican Clinical Oncologic Dispensary of Ministry of Health of the Republic of Bashkortostan. Results: analysis of the literature showed that all visualization methods have certain capabilities and limitations. Diagnosis of metastases located in the small intestine and lesions less than 5 mm in size is significantly difficult. Adhesive processes in the abdominal cavity, difficult to differentiate confluent tumor masses and inflammatory changes also affect the examination results. Our own experience demonstrates the admissibility of using a combination of pelvic magnetic resonance imaging and abdominal computed tomography for preoperative visualization of peritoneal metastases. Imaging results using instrumental methods were comparable to surgical assessment. In addition to the diagnostic limitations stated in the scientific literature, we identified difficulties in interpreting the results due to the lack of criteria for assessing peritoneal pathology by radiologists. Conclusion. Thus, according to the literature, the standard for diagnosing peritoneal metastases has not been defined. Computed tomography and magnetic resonance imaging methods are relatively accessible methods for visualizing peritoneal metastasis and complement each other, taking into account the diagnostic limitations and capabilities of each. To improve the assessment of the tumor burden at the preoperative stage, it is worth considering the possibility of creating uniform protocols for describing peritoneal metastases by abdominal region by radiologists, which will significantly facilitate the assessment and treatment planning in the future.

Experimental Design of the Adhesion between a PEI/Glass Fiber Composite and the AA1100 Aluminum Alloy with Oxide Coating Produced via Plasma Electrolytic Oxidation (PEO)

In this study, the AA1100 aluminum alloy underwent the plasma electrolytic oxidation (PEO) process to enhance its adhesion to a thermoplastic composite of polyetherimide (PEI) reinforced with glass fiber, following ASTM D1002:10 standards. A 23 factorial design was employed, varying three parameters in the oxidation process: immersion time, applied electric potential, and electrolyte concentration (Na2B4O7). The joining of aluminum and thermoplastic composite samples was achieved through oxy-fuel welding (OFW), using oxygen and acetylene gases. For the characterization of the joined samples, a universal tensile testing machine was utilized with a displacement speed of 1.5 mm/min. The analysis of the oxide coating involved scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), and Fourier transform infrared spectroscopy (FT-IR). Through variance analysis, it was determined that the statistical model encompasses approximately 80% of the variability in the adhesion process between materials. An improvement of up to 104% in adhesion between the materials was observed with the process, indicating an effective bond due to the presence of the thermoplastic matrix in the treated aluminum sample. This improvement is attributed to the morphology of the oxide coating, resembling corals, with micro-pores and recesses that facilitated mechanical anchoring.

The ecto-3′-nucleotidase activity of Acanthamoeba castellanii trophozoites increases their adhesion to host cells through the generation of extracellular adenosine

Acanthamoeba castellanii, a free-living amoeba, can be pathogenic to humans causing a corneal infection named Acanthamoeba keratitis (AK). The mannose-binding protein (MBP) is well established as the major factor related to Acanthamoeba pathogenesis. However, additional factors that participate in the adhesion process and protect trophozoites from cytolytic effects caused by host immune responses remain unknown. Ectonucleotidases, including 3′-nucleotidase/nuclease (3′-NT/NU), a bifunctional enzyme that was recently reported in A. castellanii, are frequently related to the establishment of parasitic infections. We verified that trophozoites can hydrolyze 3′-AMP, and this activity is similar to that observed in other protists. The addition of 3′-AMP increases the adhesion of trophozoites to LLC-MK2 epithelial cells, and this stimulation is completely reversed by DTT, an inhibitor of ecto-3′-nucleotidase activity. Lesions in corneal cells caused by AK infection may elevate the extracellular level of 3′-AMP. We believe that ecto-3′-nucleotidase activity can modulate the host immune response, thus facilitating the establishment of parasitic infection. This activity results from the generation of extracellular adenosine, which can bind to purinergic receptors present in host immune cells. Positive feedback may occur in this cascade of events once the ecto-3′-nucleotidase activity of trophozoites is increased by the adhesion of trophozoites to LLC-MK2 cells.

Patients' Representations of Perceived Distance and Proximity to Telehealth in France: Qualitative Study.

In the last 2 decades, new technologies have emerged in health care. The COVID-19 pandemic further accelerated the adoption of technology by both health care professionals and patients. These technologies create remote care practices that bring several benefits to the health care system: easier access to care, improved communication with physicians, and greater continuity of care. However, disparities in the acceptance and use of telehealth tools still exist among patients. These tools also disrupt conventional medical practices and prompt a new reassessment of the perceptions of distance and proximity as physical (ie, time and space dimensions) and nonphysical (ie, behavioral dimensions) concepts. The reasons why patients do or do not adopt telehealth tools for their care and therefore their perspectives on telehealth remain unanswered questions. We explored the barriers as well as the motivations for patients to adopt telehealth tools. We specifically focused on the social representations of telehealth to establish a comprehensive conceptual framework to get a better understanding of how telehealth is perceived by patients. This study uses a qualitative design through in-depth individual interviews. Participants were recruited using a convenience sampling method with balanced consideration of gender, age, location (urban/rural), and socioeconomic background. After collecting informed consent, interviews were transcribed and analyzed using the thematic analysis methodology. We conducted 14 interviews, with which data saturation was reached. The 2 main opposed dimensions, perceived proximity and distance, emerged as an essential structure for understanding the social representations of telehealth. A logic of engagement versus hostility emerged as the main tension in adopting telehealth, almost ideological. Interestingly, practical issues emerged regarding the adoption of telehealth: A logic of integration was opposed to a logic of constraints. Altogether, those dimensions enabled us to conceptualize a semiotic square, providing 4 categories with a coherent body of social representations. Due to the dynamic nature of these representations, we proposed 2 "paths" through which adherence to telehealth may improve. Our semiotic square illustrating patients' adherence to telehealth differentiates socially beneficial versus socially dangerous considerations and pragmatic from ideological postures. It shows how crucial it is to consider perceived distance and proximity to better understand barriers and motivations to adopting telehealth. These representations can also be considered as leverage that could be modified to encourage the step-by-step adhesion process. Even if reducing the perceived temporal distance to in-person meeting and enhancing the perceived proximity of access to care may be seen as efficient ways to adopt telehealth tools, telehealth can also be perceived as a care practice that threatens the patient-physician relationship. The patient-oriented perceived value turns out to be critical in the future development of and adherence to telehealth tools.

The involvement of RIPK4 in TNF-α-stimulated IL-6 and IL-8 production by melanoma cells

PurposeThe receptor-interacting protein kinase (RIPK4) has an oncogenic function in melanoma, regulates NF-κB and Wnt/β-catenin pathways, and is sensitive to the BRAF inhibitors: vemurafenib and dabrafenib which lead to its decreased level. As its role in melanoma remains not fully understood, we examined the effects of its downregulation on the transcriptomic profile of melanoma.MethodsApplying RNA-seq, we revealed global alterations in the transcriptome of WM266.4 cells with RIPK4 silencing. Functional partners of RIPK4 were evaluated using STRING and GeneMANIA databases. Cells with transient knockdown (via siRNA) and stable knockout (via CRISPR/Cas9) of RIPK4 were stimulated with TNF-α. The expression levels of selected proteins were assessed using Western blot, ELISA, and qPCR.ResultsGlobal analysis of gene expression changes indicates a complex role for RIPK4 in regulating adhesion, migration, proliferation, and inflammatory processes in melanoma cells. Our study highlights potential functional partners of RIPK4 such as BIRC3, TNF-α receptors, and MAP2K6. Data from RIPK4 knockout cells suggest a putative role for RIPK4 in modulating TNF-α-induced production of IL-8 and IL-6 through two distinct signaling pathways—BIRC3/NF-κB and p38/MAPK. Furthermore, increased serum TNF-α levels and the correlation of RIPK4 with NF-κB were revealed in melanoma patients.ConclusionThese data reveal a complex role for RIPK4 in regulating the immune signaling network in melanoma cells and suggest that this kinase may represent an alternative target for melanoma-targeted adjuvant therapy.

Tribo-electrochemical investigation of 60NiTi alloy in saline solution

This research explores the tribocorrosion behaviour of 60NiTi alloy, also known as NiTiNOL60, when exposed to a saline environment. Our investigation focuses on understanding the relationship between corrosion and wear rates and assessing surface damage and material degradation. To conduct our experiments, we employed a linear reciprocating ball-on-plate tribometer coupled with electrochemical polarisation using a three-electrode cell configuration to assess the combined effects of corrosion and sliding wear. Surface characterisation was carried out through scanning electron microscopy and energy dispersion spectroscopy, revealing the material to be a Ni-rich 60NiTi alloy, with surface oxidation evident in the electrolyte medium. Our electrochemical findings indicate the occurrence of localised corrosion in both cathodic and anodic regimes, with corrosion pit nucleation, cavities, and cracks being accelerated by reciprocating sliding and corrosion potential. These interactions exposed the material surface to various wear mechanisms, including abrasive, adhesive, oxidative, corrosive, and fatigue processes. This study underscores the significant influence of mechanical properties on the rate of material degradation due to corrosion, while also highlighting the substantial impact of prevailing electrochemical conditions on the rate of mechanical material removal. This paper offers valuable insights for designers working on load-bearing structures in saline environments.

Acquired enamel pellicle and biofilm engineering with a combination of acid-resistant proteins (CaneCPI-5, StN15, and Hemoglobin) for enhanced protection against dental caries - in vivo and in vitro investigations.

This study was designed in two-legs. In the in vivo, we explored the potential of a rinse solution containing a combination (Comb) of 0.1mg/mL CaneCPI-5 (sugarcane-derive cystatin), 1.88 × 10- 5M StN15 (statherin-derived peptide) and 1.0mg/mL hemoglobin (Hb) to change the protein profile of the acquired enamel pellicle(AEP) and the microbiome of the enamel biofilm. The in vitro, was designed to reveal the effects of Comb on the viability and bacterial composition of the microcosm biofilm, as well as on enamel demineralization. In vivo study, 10 participants rinsed (10mL,1min) with either deionized water (H2O-control) or Comb. AEP and biofilm were collected after 2 and 3h, respectively, after rinsing. AEP samples underwent proteomics analysis, while biofilm microbiome was assessed via 16S-rRNA Next Generation Sequencing(NGS). In vitro study, a microcosm biofilm protocol was employed. Ninety-six enamel specimens were treated with: 1)Phosphate-Buffered Solution-PBS(negative-control), 2)0.12%Chlorhexidine, 3)500ppmNaF and 4)Comb. Resazurin, colony-forming-units(CFU) and Transversal Microradiography(TMR) were performed. The proteomic results revealed higher quantity of proteins in the Comb compared to control associated with immune system response and oral microbial adhesion. Microbiome showed a significant increase in bacteria linked to a healthy microbiota, in the Comb group. In the in vitro study, Comb group was only efficient in reducing mineral-loss and lesion-depth compared to the PBS. The AEP modification altered the subsequent layers, affecting the initial process of bacterial adhesion of pathogenic and commensal bacteria, as well as enamel demineralization. Comb group shows promise in shaping oral health by potentially introducing innovative approaches to prevent enamel demineralization and deter tooth decay.

Imbalance between Actin Isoforms Contributes to Tumour Progression in Taxol-Resistant Triple-Negative Breast Cancer Cells.

The widespread occurrence of breast cancer and its propensity to develop drug resistance highlight the need for a comprehensive understanding of the molecular mechanisms involved. This study investigates the intricate pathways associated with secondary resistance to taxol in triple-negative breast cancer (TNBC) cells, with a particular focus on the changes observed in the cytoplasmic actin isoforms. By studying a taxol-resistant TNBC cell line, we revealed a shift between actin isoforms towards γ-actin predominance, accompanied by increased motility and invasive properties. This was associated with altered tubulin isotype expression and reorganisation of the microtubule system. In addition, we have shown that taxol-resistant TNBC cells underwent epithelial-to-mesenchymal transition (EMT), as evidenced by Twist1-mediated downregulation of E-cadherin expression and increased nuclear translocation of β-catenin. The RNA profiling analysis revealed that taxol-resistant cells exhibited significantly increased positive regulation of cell migration, hormone response, cell-substrate adhesion, and actin filament-based processes compared with naïve TNBC cells. Notably, taxol-resistant cells exhibited a reduced proliferation rate, which was associated with an increased invasiveness in vitro and in vivo, revealing a complex interplay between proliferative and metastatic potential. This study suggests that prolonged exposure to taxol and acquisition of taxol resistance may lead to pro-metastatic changes in the TNBC cell line.

A film composed of PEDOT:PSS/PVA as a sensitive medium for pH sensor in optical fiber

In this work, a pH sensitive transducer element attached to a multimode optical fiber section is proposed. The sensitive element is a PEDOT:PSS/PVA composite film that exhibited sensitivity at low pH values in the range of 1–7 pH. The addition of PVA was important for the adhesion process to the optical fiber surface. The morphology of the PEDOT:PSS polymers allowed characterization at pH stimuli that were based on the optical power transmission generated from the interaction of the light propagating in the optical fiber core and the optical fiber section coated with the sensitive film. A sensitivity of −0.05 dB/pH and a linear fit R2 of 0.93 was obtained, the response time was 3 s, while the sensor recovery time was 50 s maintaining stability higher than 10 min.

Assessment of the anti-inflammatory and biological properties of Bioroot Flow: A novel bioceramic sealer.

IntroductionBioRoot Flow (BRF) is a novel premixed bioceramic sealer indicated for endodontic treatments, but the biological and immunomodulatory effects of this endodontic sealer on human periodontal ligament stem cells (hPDLSCs) have not been elucidated. MethodsTo ascertain the biological impact of BRF, TotalFill BC Sealer (TFbc), and AH Plus (AHP) on human Periodontal Ligament Stem Cells (hPDLSCs), assessments were conducted to evaluate the cytocompatibility, cellular proliferation, migratory capacity, osteo/cementogenic differentiation potential, the ability to form mineralized nodules, and the immunomodulatory characteristics of hPDLSCs following treatment with these endodontic sealers. ResultsBiological assays showed adequate cell metabolic activity and cell migration in BRF, while SEM assay evidenced that TFbc and BRF groups demonstrated a superior cell adhesion process, including substrate adhesion, cytoskeleton development, and spreading on the niche-like structures of the cement as compared to the AHP group. TFbc and BRF-treated groups exhibited a significantly lower IL6 and IL8 production than AHP (* p <.05). The bioceramic sealers stimulated heightened expression of BSP, CEMP-1, and CAP genes within a 7–14 day period. Notably, BRF and TFbc demonstrated a significant enhancement in the mineralization of hPDLSCs when compared to the negative control. Among these, cells treated with BRF showed a more substantial accumulation of calcium (*** p < .001). ConclusionsTaken together, these findings indicate that BRF can potentially enhance cell differentiation by promoting the expression of essential genes related to bone and cement formation. In addition, BRF and TFbc displayed anti-inflammatory effects.

Establishment and characterization of a golden pompano (Trachinotus blochii) fin cell line for applications in marine fish pathogen immunology

Pompano fishes have been widely farmed worldwide. As a representative commercial marine species of the Carangidae family, the golden pompano (Trachinotus blochii) has gained significant popularity in China and worldwide. However, because of rapid growth and high-density aquaculture, the golden pompano has become seriously threatened by various diseases. Cell lines are the most cost-effective resource for in vitro studies and are widely used for physiological and pathological research owing to their accessibility and convenience. In this study, we established a novel immortal cell line, GPF (Golden pompano fin cells). GPF has been passaged over 69 generations for 10 months. The morphology, adhesion and extension processes of GPF were evaluated using light and electron microscopy. GPF cells were passaged every 3 days with L-15 containing 20 % fetal bovine serum (FBS) at 1:3. The optimum conditions for GPF growth were 28 °C and a 20 % FBS concentration. DNA sequencing of 18S rRNA and mitochondrial 16S rRNA confirmed that GPF was derived from the golden pompano. Chromosomal analysis revealed that the number pattern of GPF was 48 chromosomes. Transfection experiments demonstrated that GPF could be utilized to express foreign genes. Furthermore, heavy metals (Cd, Cu, and Fe) exhibited dose-dependent cytotoxicity against GPF. After polyinosinic-polycytidylic acid (poly I:C) treatment, transcription of the retinoic acid-inducible gene I-like receptor (RLR) pathway genes, including mda5, mita, tbk1, irf3, and irf7 increased, inducing the expression of interferon (IFN) and anti-viral proteins in GPF cells. In addition, lipopolysaccharide (LPS) stimulation up-regulated the expression of inflammation-related factors, including myd88, irak1, nfκb, il1β, il6, and cxcl10 expression. To the best of our knowledge, this is the first study on the immune response signaling pathways of the golden pompano using an established fin cell line. In this study, we describe a preliminary investigation of the GPF cell line immune response to poly I:C and LPS, and provide a more rapid and efficient experimental material for research on marine fish immunology.

Temperature Dependence of the Polar and Lewis Acid-Base Properties of Poly Methyl Methacrylate Adsorbed on Silica via Inverse Gas Chromatography.

The adsorption of polymers on solid surfaces is common in many industrial applications, such as coatings, paints, catalysis, colloids, and adhesion processes. The properties of absorbed polymers commonly vary with temperature. In this paper, inverse gas chromatography at infinite dilution was used to determine the physicochemical characterization of PMMA adsorbed on silica. A new method based on the London dispersion equation was applied with a new parameter associating the deformation polarizability with the harmonic mean of the ionization energies of the solvent. More accurate values of the dispersive and polar interaction energies of the various organic solvents adsorbed on PMMA in bulk phase and PMMA/silica at different recovery fractions were obtained, as well as the Lewis acid-base parameters and the transition temperatures of the different composites. It was found that the temperature and the recovery fraction have important effects on the various physicochemical and thermodynamic properties. The variations in all the interaction parameters showed the presence of three transition temperatures for the different PMMA composites adsorbed on silica with various coverage rates, with a shift in these temperatures for a recovery fraction of 31%. An important variation in the polar enthalpy and entropy of adsorption, the Lewis acid-base parameters and the intermolecular separation distance was highlighted as a function of the temperature and the recovery fraction of PMMA on silica.

Sertoli cells require hnRNPC to surport normal spermatogenesis and male fertility in mice.

Sertoli cells (SCs) act as highly polarized testicular cells that nutritionally support multiple stages of germ cell development. However, the gene regulation network in SCs for modulating germ cell development has yet to be fully understood. In this study, we report that heterogeneous nuclear ribonucleoproteins C (hnRNPC) in SCs are essential for germ cell development and male fertility. Conditional knockout of hnRNPC in mouse SCs leads to aberrant SC proliferation, disrupted cytoskeleton of SCs, and compromised blood-testis barrier function, resulting in loss of supportive cell function and, ultimately, defective spermiogenesis in mice. Further RNA-seq analyses revealed these phenotypes are likely caused by the dysregulated genes in hnRNPC-deficient SCs related to cell adhesion, cell proliferation, and apoptotic process. In conclusion, this study demonstrates that hnRNPC plays a critical role in SCs for maintaining the function of SCs and sustaining steady-state spermatogenesis in mice.

N-cadherin directs the collective Schwann cell migration required for nerve regeneration through Slit2/3 mediated contact inhibition of locomotion.

Collective cell migration is fundamental for the development of organisms and in the adult, for tissue regeneration and in pathological conditions such as cancer. Migration as a coherent group requires the maintenance of cell-cell interactions, while contact inhibition of locomotion (CIL), a local repulsive force, can propel the group forward. Here we show that the cell-cell interaction molecule, N-cadherin, regulates both adhesion and repulsion processes during rat Schwann cell (SC) collective migration, which is required for peripheral nerve regeneration. However, distinct from its role in cell-cell adhesion, the repulsion process is independent of N-cadherin trans-homodimerisation and the associated adherens junction complex. Rather, the extracellular domain of N-cadherin is required to present the repulsive Slit2/Slit3 signal at the cell-surface. Inhibiting Slit2/Slit3 signalling inhibits CIL and subsequently collective Schwann cell migration, resulting in adherent, nonmigratory cell clusters. Moreover, analysis of ex vivo explants from mice following sciatic nerve injury showed that inhibition of Slit2 decreased Schwann cell collective migration and increased clustering of Schwann cells within the nerve bridge. These findings provide insight into how opposing signals can mediate collective cell migration and how CIL pathways are promising targets for inhibiting pathological cell migration.

Prey killing without invasion by Bdellovibrio bacteriovorus defective for a MIDAS-family adhesin

The bacterium Bdellovibrio bacteriovorus is a predator of other Gram-negative bacteria. The predator invades the prey’s periplasm and modifies the prey’s cell wall, forming a rounded killed prey, or bdelloplast, containing a live B. bacteriovorus. Redundancy in adhesive processes makes invasive mutants rare. Here, we identify a MIDAS adhesin family protein, Bd0875, that is expressed at the predator-prey invasive junction and is important for successful invasion of prey. A mutant strain lacking bd0875 is still able to form round, dead bdelloplasts; however, 10% of the bdelloplasts do not contain B. bacteriovorus, indicative of an invasion defect. Bd0875 activity requires the conserved MIDAS motif, which is linked to catch-and-release activity of MIDAS proteins in other organisms. A proteomic analysis shows that the uninvaded bdelloplasts contain B. bacteriovorus proteins, which are likely secreted into the prey by the Δbd0875 predator during an abortive invasion period. Thus, secretion of proteins into the prey seems to be sufficient for prey killing, even in the absence of a live predator inside the prey periplasm.

Passively Q-switched Er-doped fiber laser based on carbon-doped silver nanoparticles saturable absorber prepared using laser ablation method

In this work, we investigate the effect of carbon-doped silver nanoparticles on the Q-switched performance of erbium-doped fiber laser (EDFL). The carbon-doped silver nanoparticles were synthesized using a laser ablation method. The prepared nanoparticles were inserted between fiber ferrules using the adhesion process of the index-matched gel. Incorporating a saturable absorber inside the laser cavity initiates a stable Q-switched mechanism at 11.2 mW of threshold power. The measured results demonstrate that as the pump power of EDFL increases from 11.2 to 267 mW, the pulse repetition, and pulse width tuned from 21.33 to 95.2 kHz and 13.3–3.18 µs, respectively. At 267 mW of pump, the maximum average output power, pulse energy, and peak power were further measured to be 2.36 mW, 24.68 nJ, and 7.76 mW, respectively. Besides, the stability and threshold characteristics of EDFL based on carbon-doped silver nanoparticles were further explored. This study shows that the synthesis of metal nanoparticles using the laser ablation technique and their implementation as saturable absorber represents a promising avenue for advancing ultrafast laser technologies with improved stablility, efficiency, and tunability.

An Original UV Adhesive Watermelon Grafting Method, the Grafting Device, and Experimental Verification

This study is aimed at traditional vegetable grafting using a large number of plastic clips, which cannot be recycled in time and cause serious pollution within the planting environment. This paper proposes a new grafting method based on a UV adhesive instead of plastic clips. First of all, a UV adhesive spray grafting device was designed. The structure includes seedling adsorption positioning mechanisms, a butt joint mechanism, a handling mechanism, a spray valve, a UV curing lamp, etc., to facilitate the adhesive spraying. For the rootstock and scion, a horizontal, lateral seedling and negative pressure adsorption and positioning method is adopted, with fluid dynamics simulation of the diameter and quantity of the adsorption holes in the rootstock adsorption mechanism carried out using Fluent 2022 R1 software and completion of the optimization of the parameters of the adsorption and positioning mechanism. The fluid volume method is used to simulate the adsorption and positioning mechanism. For optimization, the volume of fluid method (VOF) and the discrete particle method (DPM) are used in a coupled simulation of the UV adhesive spraying process, and the value range of the spraying influencing factors is determined: the selected glue pressure, atomization pressure, and spraying height for three-factor, three-level orthogonal simulation. A grafting test is also verification, deriving the significance ranking of their impact on the success rate of the grafting: atomization pressure &gt; spraying height &gt; glue pressure. Under the condition of a 0.25 Mpa atomization pressure, a 0.15 Mpa glue supply pressure, and a 10 mm spraying height, the grafting success rate for watermelon was 100%, the effective spraying rate was 83.03%, the healing success rate was 94.5%, and the length of the film was 7.86 mm. The results of the study can provide a research basis for the research and development of new types of spraying and grafting robot technology.

Flexible Supercapacitor with Wide Electrochemical Stable Window Based on Hydrogel Electrolyte.

Hydrogel electrolyte can endow supercapacitors with excellent flexibility, which has developed rapidly in recent years. However, the water-rich structures of hydrogel electrolyte are easy to freeze at subfreezing and dry at high temperatures, which will affect its energy storage characteristics. The low energy density of micro supercapacitors also hinders their development. Herein, a strategy is proposed to reduce the free water activity in the hydrogel to improve the operating voltage and the energy density of the device, which is achieved through the synergistic effect of the hydrogel skeleton, N, N'-dimethylformamide (DMF), NaClO4 and water. High concentrations of DMF and NaClO4 are introduced into sodium alginate/polyacrylamide (SA/PAAM) hydrogel through solvent exchange to obtain SA/PAAM/DMF/NaClO4 hydrogel electrolyte, which exhibited a high ionic conductivity of 82.1 mS cm-1, a high breaking strength of 563.2kPa, and a wide voltage stability window of 3.5V. The supercapacitor devices are assembled by the process of direct adhesion of the hydrogel electrolyte and laser induced graphene (LIG). The micro-supercapacitor exhibited an operating voltage of 2.0V, with a specific capacitance of 2.41 mF cm-2 and a high energy density of 1.34 µWh cm-2, and it also exhibit a high cycle stability, good flexibility, and integration performance.

Effect of N2 partial pressure on ZrN coating orientation and tribocorrosion behavior and mechanism

The ZrN coatings were prepared using multi-arc ion plating (MAIP) under different N2 partial pressures ranging from 10 % to 80 %. A comprehensive analysis of the microstructure, electrochemical behavior, and tribocorrosion properties of these coatings showed a gradual deposition rate decrease with rising N2 partial pressure. Analysis using GIXRD revealed higher N2 pressure led to a shift in crystal orientation from (111) to (200), initially increasing corrosion resistance but later declining. At 70 % N2 pressure, the ZrN coating exhibited the lowest values of capacitance Cpo (8.89 μF cm−2) and double-layer capacitance Cdl (1.14 × 10−7 F cm−2), with the highest values for the two-time constants τ recorded as 0.274 s and 5.749 s. The tribocorrosion behavior correlated closely with the corrosion performance, with the ZrN-70 % coating demonstrating superior tribocorrosion resistance and a minimal wear rate of 4.25 × 10−5 mm3/Nm. While the ZrN-80 % coating exhibited the lowest wear rate of 2.67 × 10−5 mm3/Nm, but was more susceptible to friction and corrosion synergy, causing localized failure. The outcomes reveal crystal texture significantly affected on the electrochemical and tribocorrosion characteristics of the coatings, primarily attributed to the robust passivation tendency and stability of the passivation film associated with the (200) crystal orientation. The dominant wear mechanism identified involves the interplay of adhesive, abrasive, and corrosion-erosion wear processes. Based on these results, ZrN coatings prepared using MAIP are expected to emerge as candidate materials for critical friction components in marine equipment or other corrosion-erosion environments.