Adduction Angle Research Articles

Females Present Different Single-Leg Squat Kinematics and Muscle Activation Strategies than Males Even after Hip Abductor Fatigue

Background: Despite the potential connection between hip and knee muscle control, there is limited research on the effects of hip abductor fatigue on the hip and knee neuromuscular responses in both males and females. This study aimed to investigate the influence of sex on the hip and knee frontal plane kinematics and the EMG responses of the hip abductors and knee extensor muscles during the single-leg squat before and after hip abductor fatigue. Methods: A total of 30 participants (males, n = 15; females, n = 15) performed single-leg squats before and immediately after a hip abductor fatigue protocol (10° hip abduction position while bearing a 20% load of their estimated 1RM until exhaustion). The frontal plane kinematics (hip adduction and knee frontal plane projection angle) and EMG parameters (amplitude and median frequency) of the gluteus medius (GMed), tensor fascia latae (TFL), vastus lateralis (VL) and vastus medialis (VM) were measured during the single-leg squat. Results: We did not find any effects of hip abductor fatigue or interaction between fatigue and sex on the evaluated parameters (p > 0.05). However, compared to males, females had greater values for the hip and knee frontal plane kinematics (p = 0.030), GMed EMG amplitude (+10.2%, p = 0.012) and median frequency (+10.3%; p = 0.042) and lower VL median frequency (−9.80%; p = 0.007). Conclusions: These findings establish sex-related differences in the kinematics and hip and knee EMG parameters during the single-leg squat, which were not influenced by the hip abductor fatigue protocol.

Biomechanical Posture Analysis in Healthy Adults with Machine Learning: Applicability and Reliability.

Posture analysis is important in musculoskeletal disorder prevention but relies on subjective assessment. This study investigates the applicability and reliability of a machine learning (ML) pose estimation model for the human posture assessment, while also exploring the underlying structure of the data through principal component and cluster analyses. A cohort of 200 healthy individuals with a mean age of 24.4 ± 4.2 years was photographed from the frontal, dorsal, and lateral views. We used Student's t-test and Cohen's effect size (d) to identify gender-specific postural differences and used the Intraclass Correlation Coefficient (ICC) to assess the reliability of this method. Our findings demonstrate distinct sex differences in shoulder adduction angle (men: 16.1° ± 1.9°, women: 14.1° ± 1.5°, d = 1.14) and hip adduction angle (men: 9.9° ± 2.2°, women: 6.7° ± 1.5°, d = 1.67), with no significant differences in horizontal inclinations. ICC analysis, with the highest value of 0.95, confirms the reliability of the approach. Principal component and clustering analyses revealed potential new patterns in postural analysis such as significant differences in shoulder-hip distance, highlighting the potential of unsupervised ML for objective posture analysis, offering a promising non-invasive method for rapid, reliable screening in physical therapy, ergonomics, and sports.

Effect of <italic>Hwanggigyejiomul-tang</italic> on Postoperative Breast Cancer-related Lymphedema (BCRL): A Systematic Review and Meta-analysis

Objectives: This study assessed the effectiveness of <i>Hwanggigyejiomul-tang</i> for postoperative breast cancer-related lymphedema (BCRL) by a systematic review and meta-analysis of randomized controlled trials (RCTs).Methods: A search was conducted using keywords such as “breast cancer”, “lymphedema”, “edema”, “Huangqi Guizhi Wuwu decoction”, “Huangqi Guizhi Wuwu tang”, and “Hwanggigyejiomul tang” in 10 databases (PubMed, Cochrane, ScienceDirect, CNKI, CiNii, RISS, KISS, ScienceON, OASIS, DBpia) on February 11, 2024. There were no limits on the publication period and language, and the quality of the studies was evaluated using Cochrane’s risk of bias tool. A meta-analysis was performed based on the outcome measurements, such as total effective rate (TER), increase in shoulder joint mobility (flexion, extension, abduction, adduction), Fugl-Meyer assessment (FMA), and visual analog scale (VAS) using Review Manager Web.Results: Eleven RCTs were selected. The treatment group (<i>Hwanggigyejiomul-tang-gagambang</i> or <i>hapbang</i> with control group intervention) showed a more statistically significant effect compared with the control group (physical therapy or western medicine) in TER (upper limb circumference change), TER (upper limb edema grade change), increase in flexion angle, increase in extension angle, increase in adduction angle, FMA, and VAS.Conclusions: <i>Hwanggigyejiomul-tang</i> is effective in treating postoperative BCRL. However, because of the low quality of the included studies, more clinical studies are required to increase the possibility of clinical use.

Differences in lower extremity kinematics during single-leg lateral drop landing of healthy individuals, injured but asymptomatic patients, and patients with chronic ankle instability- a cross-sectional observational study.

The lower-extremity kinematics associated with forward jump landing after an ankle injury is known to differ for patients with Chronic Ankle Instability (CAI), copers (injured but asymptomatic patients), and healthy individuals. However, the differences in the lower extremity kinematics of these groups associated with a Single-leg Lateral Drop Landing (SLDL) are unknown. The purpose of this study is to characterize the lower limb and foot kinematics during SLDL in CAI patients and to compare these characteristics with those of the copers and healthy individuals. This was a cross-sectional observational study. Nineteen participants, each, were selected from the CAI, Coper, and control groups. The lower-extremity kinematics during SLDL was measured using three-dimensional motion analysis over an interval progressing from 200 ms before landing to 200 ms after landing. Either one-way ANOVA or the Kruskal-Wallis test was used to compare the attributes of the respective groups, with each parameter measured every 10 ms. The maximum values and excursions of the parameters were established over time intervals progressing from 200 ms before landing to 200 ms after landing. Significant observations were subjected to post hoc analysis. Compared to the Coper group, the CAI group exhibited significantly smaller hip adduction angles at 160 ms, ankle dorsiflexion angles in the 110-150 ms interval, and maximum ankle dorsiflexion angles after landing. Compared to the control group, the CAI group exhibited significantly smaller excursions of MH inversion/eversion after landing. Our findings confirm the necessity of focusing on the kinematics of hip adduction/abduction and plantar/dorsiflexion during SLDL in evaluating patients with ankle injuries.

Morphology and transverse alignment of the patella have no effect on knee gait characteristics in healthy Chinese adults over the age of 40years.

Background: The influence of patella morphology and horizontal alignment on knee joint kinematics and kinetics remains uncertain. This study aimed to assess patella morphology and transverse alignment in relation to knee kinetics and kinematics in individuals without knee conditions. A secondary objective was to investigate the impact of femur and tibia alignment and shape on knee gait within this population. Patients and methods: We conducted a prospective collection of data, including full-leg anteroposterior and skyline X-ray views and three-dimensional gait data, from a cohort comprising 54 healthy individuals aged 40years and older. Our study involved correlation and logistic regression analyses to examine the influence of patella, femur, and tibia morphology and alignment on knee gait. Results: The patellar tilt angle or the patella index did not show any significant relationships with different aspects of gait in the knee joint, such as velocity, angle, or moment (p > 0.05, respectively). Using multivariate logistic regression analysis, we found that the tibiofemoral angle and the Q angle both had a significant effect on the adduction angle (OR = 1.330, 95%CI 1.033-1.711, p = 0.027; OR = 0.475, 95%CI 0.285-0.792, p = 0.04; respectively). The primary variable influencing the knee adduction moment was the tibiofemoral angle (OR = 1.526, 95% CI 1.125-2.069, p = 0.007). Conclusion: In healthy Chinese individuals aged over 40, patella morphology and transverse alignment do not impact knee gait. However, the femoral-tibial angle has a big impact on the knee adduction moment.

A 2D video-based assessment is associated with 3D biomechanical contributors to dynamic knee valgus in the coronal plane.

Adolescent athletes involved in sports that involve cutting and landing maneuvers have an increased risk of anterior cruciate ligament (ACL) tears, highlighting the importance of identifying risky movement patterns such as dynamic knee valgus (DKV). Qualitative movement screenings have explored two-dimensional (2D) scoring criteria for DKV, however, there remains limited data on the validity of these screening tools. Determining a 2D scoring criterion for DKV that closely aligns with three-dimensional (3D) biomechanical measures will allow for the identification of poor knee position in adolescent athletes on a broad scale. The purpose of this study was to establish a 2D scoring criterion that corresponds to 3D biomechanical measures of DKV. A total of 41 adolescent female club volleyball athletes performed a three-task movement screen consisting of a single-leg squat (SLS), single-leg drop landing (SLDL), and double-leg vertical jump (DLVJ). A single rater scored 2D videos of each task using four criteria for poor knee position. A motion capture system was used to calculate 3D joint angles, including pelvic obliquity, hip adduction, knee abduction, ankle eversion, and foot progression angle. Receiver operating characteristic curves were created for each 2D scoring criterion to determine cut points for the presence of movement faults, and areas under the curve (AUC) were computed to describe the accuracy of each 2D criterion compared to 3D biomechanical data. 3D measures indicated knee abduction angles between 2.4°-4.6° (SD 4.1°-4.3°) at the time point when the center of the knee joint was most medial during the three tasks. AUCs were between 0.62 and 0.93 across scoring items. The MEDIAL scoring item, defined as the knee joint positioned inside the medial border of the shoe, demonstrated the greatest association to components of DKV, with AUCs ranging from 0.67 to 0.93. The MEDIAL scoring criterion demonstrated the best performance in distinguishing components of DKV, specifically pelvic obliquity, hip adduction, ankle eversion, and foot progression. Along with the previously published scoring definitions for trunk-specific risk factors, the authors suggest that the MEDIAL criterion may be the most indicative of DKV, given an association with 3D biomechanical risk factors.

Segmental femoral fracture malunion: evidence and prognostic analysis of medical intervention in the third century BC

We examined the remains of an individual who was unearthed from the Tuchengzi site and was believed to be from the Warring States period in China. The remains exhibited segmental femoral fracture. We aimed to deduce the cause of fracture, medical interventions, healing process, and motion behavior after fracture healing using several techniques, including macroscopic observation, computed tomography (CT), and finite element analysis. Based on the morphology of the long bones, it appeared that the individual was male. The fractures resulted in an adduction angle of 5.47° and an anterior flexion angle of 21.34° in the proximal femur, while the femoral neck anteversion angle had been replaced by a retroversion angle of 10.74°. Additionally, the distal femur formed an abnormal anterior convex angle of 144.60°. CT revealed mature callus formation and visible trabecular bundles. The finite element analysis indicated that the maximum von Mises stress in the femur was 17.44 MPa during standing and 96.46 MPa during walking. We suggest that medical practitioners in the Warring States period possessed a good knowledge of thigh anatomy, enabling them to perform fracture reduction and fixation. Reasonable medical intervention facilitated fracture healing and load recovery. Satisfactory fracture healing ensured that the individual could engage in normal standing and walking activities after rehabilitation.

Improving Prenatal Diagnosis Precision for Congenital Clubfoot by Using Three-Dimensional Ultrasonography.

Prenatal diagnosis of clubfoot traditionally relied on two-dimensional ultrasonography. To enhance diagnosis and predict postnatal outcomes, we examined the parameters that differentiate pathological clubfoot using three-dimensional ultrasonography. In our retrospective study, we examined the findings of prenatal ultrasound and the postnatal outcomes of pregnancies with suspected congenital clubfoot between 2018 and 2021. Based on the three-dimensional perspective, we measured the angles of varus, equinus, calcaneopedal block, and forefoot adduction and compared the sonographic variables between the postnatal treated and non-treated groups. We evaluated 31 pregnancies (47 feet) with suspected clubfoot using three-dimensional ultrasonography. After delivery, a total of 37 feet (78.7%) underwent treatment involving serial casting only or additional Achilles tenotomy. The treated group showed significantly greater hindfoot varus deviation (60.5° vs. 46.6°, p = 0.026) and calcaneopedal block deviation (65.6° vs. 26.6°, p < 0.05) compared to the non-treated group. The calcaneopedal block had an area under the curve of 0.98 with a diagnostic threshold of 46.2 degrees (sensitivity of 97%, specificity of 90%, positive predictive value of 97%, and negative predictive value of 90%). During prenatal evaluation of clubfoot using three-dimensional ultrasonography, the calcaneopedal block deviation has the potential to predict postnatal treatment.

Biomechanical response of lower limb joints to lateral wedge insoles

Lateral wedge insole (LWI) is a frequently recommended treatment option for early and midterm stages of medial knee osteoarthritis. However, studies of its effects on the lower limb joints are incomplete and imperfect. The main purpose of this study was to quantitatively analyze the response of intervention of LWI on lower-limb joint kinematics, ground reaction forces (GRFs), and centre of pressure (COP). Gait analysis of 16 healthy subjects was conducted. Three-dimensional motion data and force plate measurements were collected in the control (barefoot) and experimental conditions (wearing a pair of assigned shoes with 0, 7, and 10 mm LWIs). Results showed that the peak knee flexion angle was increased by 3.43°, 3.09°, and 3.27° with 0, 7, and 10 mm LWIs, respectively (p < 0.01). The ankle peak dorsiflexion angle was significantly decreased by 3.79°, 2.19°, and 1.66° with 0, 7, and 10 mm LWIs, respectively (p = 0.02). The internal rotation angle was increased by 2.78°, 3.76°, and 4.58° with 0, 7, and 10 mm LWIs, respectively (p < 0.01). The forefoot with LWIs showed highly significantly smaller inversion, eversion, and adduction angles (all p < 0.01). The 1st peak of the vertical GRF (p = 0.016) also increased significantly by a maximum of 0.06 body weight (BW) with LWIs. These results indicated that biomechanical changes and limitations of lateral wedges insole should be analyzed in more detail, possibly leading to new guidelines for the design and application.

A Linkage-Driven Underactuated Robotic Hand for Adaptive Grasping and In-Hand Manipulation

The development of robotic hand that can imitate human movements has always been an important research topic. In this paper, a linkage-driven underactuated three-finger hand is proposed to imitate the flexion/extension (f/e) and abduction/adduction (a/a) motions of human hand. The robotic hand has three identical underactuated fingers, each of which contains an underactuated planar linkage, a spherical four-bar mechanism, and a set of bevel gears. The spherical four-bar mechanism is designed to provide 2-degree-of-freedom actuation, driving the f/e and a/a motions of the proximal joint simultaneously. Based on screw theory, the kinematic model of the spherical mechanism is established, and the maximum available workspace index (MAW) of the spherical mechanism is proposed to evaluate the workspace with the same adduction and abduction angle ranges. The effects of the parameters of the spherical mechanism on the MAW and the transmission efficiency are obtained, and the parameters of the spherical mechanism are optimized. The optimization results show that the MAW of the spherical mechanism can be increased by up to 3.5 times. Finally, experiments are carried out to show the proposed robotic hand can perform simultaneous adaptive grasping and in-hand manipulation. <italic xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">Note to Practitioners</i> —The robotic hand is of great significance for replacing workers in heavy, repetitive, and unsafe working environments. Uncertain environments in non-manufacturing fields, such as industries for pick-and-place, sorting, palletizing, assembly and other operations, marine development, and medical service, require that robotic hands can operate tasks like human hands. Inspired by the human hand with the f/e and a/a motions, a linkage-driven underactuated three-finger hand is proposed in this paper to imitate the functions of the human hand. Due to its underactuated characteristics and a/a function, the designed robotic hand is more dexterous and economical. The effects of the design parameters of the spherical mechanism on the MAW and the transmission efficiency are analyzed, and the parameters of the spherical mechanism are optimized to improve the performance of the robotic hand. This approach can be used in other industrial applications related to the robotic hand or the spherical mechanism.

Effects of Mental Fatigue on Depth Jump in Division I Female Soccer Players

Mental fatigue has been shown to hinder physical performance, especially in endurance-based sports. However, little research has been done concerning the impacts of mental fatigue on shorter maximal effort movements commonly encountered in sports activities, such as the depth jump. The purpose of this study was to investigate the effects of mental fatigue on depth jump performance and lower limb kinematics in Division I female soccer players. Eighteen participants performed depth jumps before and after a mentally fatiguing Stroop task. Multiple paired t tests were used to examine differences in dependent variables across conditions. The findings revealed a decrease in jump height (p = .002), propulsive impulse (p = .004), and peak hip adduction angles on the left (p = .003), while knee kinematics remained unchanged. This study challenges previous research on maximal anaerobic exercises, revealing mental fatigue’s potential influence on jumping and landing movements. However, mixed results in lower limb kinematics warrant further investigation. The study provides insights into the intricate relationship between mental fatigue and athletic capabilities, emphasizing the need for tailored interventions and further exploration of sport-specific movements.

QCT-based 3D finite element modeling to assess patient-specific hip fracture risk and risk factors

Early assessment of hip fracture risk may play a critical role in designing preventive mechanisms to reduce the occurrence of hip fracture in geriatric people. The loading direction, clinical, and morphological variables play a vital role in hip fracture. Analyzing the effects of these variables helps predict fractures risk more accurately; thereby suggesting the critical variable that needs to be considered. Hence, this work considered the fall postures by varying the loading direction on the coronal plane (α) and on the transverse plane (β) along with the clinical variables—age, sex, weight, and bone mineral density, and morphological variables—femoral neck axis length, femoral neck width, femoral neck angle, and true moment arm. The strain distribution obtained via finite element analysis (FEA) shows that the angle of adduction (α) during a fall increases the risk of fracture at the greater trochanter and femoral neck, whereas with an increased angle of rotation (β) during the fall, the FRI increases by ∼1.35 folds. The statistical analysis of clinical, morphological, and loading variables (αandβ) delineates that the consideration of only one variable is not enough to realistically predict the possibility of fracture as the correlation between individual variables and FRI is less than 0.1, even though they are shown to be significant (p<0.01). On the contrary, the correlation (R2=0.48) increases as all variables are considered, suggesting the need for considering different variables fork predicting FRI. However, the effect of each variable is different. While loading, clinical, and morphological variables are considered together, the loading direction on transverse plane (β) has high significance, and the anatomical variabilities have no significance.

The effects of a sleeve knee brace during stair negotiation in patients with symptomatic patellofemoral osteoarthritis

BackgroundThe patellofemoral joint is an important source of pain in knee osteoarthritis. Most biomechanical research in knee osteoarthritis has focused on the tibiofemoral joint during level walking. It is unknown what happens during stair negotiation in patients with patellofemoral joint osteoarthritis, a task commonly increasing pain. Conservative therapy for patellofemoral joint osteoarthritis includes the use of a sleeve knee brace. We aimed to examine the effect of a sleeve knee brace on knee biomechanics during stair negotiation in patellofemoral joint osteoarthritis patients. Methods30 patellofemoral joint osteoarthritis patients (40–70 years) ascended and descended an instrumented staircase with force plates under two conditions – wearing a Lycra flexible knee support (Bioskin Patellar Tracking Q Brace) and no brace (control condition). Knee joint kinematics (VICON) and kinetics were recorded. FindingsDuring stair ascent, at the knee, the brace significantly reduced the maximal flexion angle (2.70, P = 0.002), maximal adduction angle (2.00, P = 0.044), total sagittal range of motion (2.00, P = 0.008), total frontal range of motion (1.70, P = 0.023) and sagittal peak extension moment (0.05 Nm/kg, P = 0.043) compared to control. During stair descent, at the knee, the brace significantly reduced the maximal flexion angle (1.80, P = 0.039) and total sagittal range of motion (1.50, P = 0.045) compared to control. InterpretationThe small changes in knee joint biomechanics during stair negotiation observed in our study need to be investigated further to help explain mechanisms behind the potential benefits of a sleeve knee brace for painful patellofemoral joint osteoarthritis.

Different neuromuscular parameters are associated with knee abduction and hip adduction angles during functional tasks

Knee abduction and hip adduction during functional tasks may indicate increased joint injury risk and discriminate between pathological and healthy people. Muscles’ neuromuscular variables such as amplitude (EMGAMP) and onset (EMGONSET) have been used to explain kinematics. The study aimed to evaluate the correlation between two EMG variables of seven trunk and lower limb muscles and 3D kinematics during two tasks. Eighteen physically-active women participated in the study. The following variables were obtained during single-leg squat and anterior step-down: (i) EMGAMP and EMGONSET of fibularis longus (FL), tibialis anterior (TA), vastus medialis (VM), biceps femoris (BF), gluteus medius (GMED), ipsilateral (OB_IL) and contralateral (OB_CL) external obliques and (ii) knee abduction and hip adduction angular displacement (initial angle – angle at 60° of knee flexion). Spearman’s correlation coefficient was calculated between kinematic and EMG variables. Greater knee abduction was correlated with delayed TAONSET, GMEDONSET and OB_ILONSET during step-down. Greater hip adduction was correlated with lower VMAMP, BFAMP and delayed VMONSET during step-down. Although task-specific, these results suggest that EMGONSET may influence knee abduction, while both EMGONSET and EMGAMP may affect hip adduction. The identification of muscle activation patterns in relation to kinematics may help the development of injury prevention and rehabilitation programs.

Forward step down test - clinical rating is correlated with joint angles of the pelvis and hip: an observational study

BackgroundClinical methods for assessing quality of movement and functional tests are important to clinicians. Typical deviations from normal kinematics during the clinical test of Forward Step Down Test (FSDT) are pelvic tilt and hip adduction which are associated with the risk of knee pain.Objectives(1) to examine the correlation between clinical assessment of the FSDT and joint angle measurements of pelvis, hip, knee and ankle joints in males and females; (2) to examine the differences in joint angles between individuals rated as good, fair or poor in a FSDT performance test.MethodsNinety-two healthy individuals performing FSDT were video-taped with two-dimensional digital video cameras. The clinical assessment of the FSDT was rated by two experienced physical therapists as good, fair, or poor based on a Crossley et al. (2011) validated scale. Measurements of pelvic drop, hip adduction and knee valgus were taken using Image J software.ResultsOut of 177 lower limbs, 74 (37 in each limb) were clinically rated as “good/fair” (41.80%) while 103 (52 in the dominant leg and 51 in the non-dominant leg) were rated as “poor” (58.19%). No significant differences were observed between dominant and non-dominant legs or between males and females in clinical rating of the FSDT. Pelvic drop angle was significantly higher and hip adduction angle was significantly lower for “poor” clinical rating compared to “good/fair” in both dominant and non-dominant legs (p < 0.001) in males and females. Females demonstrated higher pelvic drop, lower hip adduction and higher knee valgus angles compared with males (p < 0.05).ConclusionsThis study showed that the clinical rating of FSDT is correlated with joint angle measurements suggesting that this assessment can be utilized in clinical practice. Individuals with poor quality performance of FSDT showed higher pelvic drop and hip adduction movement. Further studies examining different populations with diverse disorders or pathologies are essential.

The Association of Age and Sex With Joint Angles and Coordination During Unanticipated Cutting in Soccer Players.

Deficits in movement patterns during cutting while running might place soccer players at risk of injury. The objective was to compare joint angles and intersegment coordination between sexes and ages during an unanticipated side-step cutting task in soccer players. This cross-sectional study recruited 11 male (four adolescents and seven adults) and 10 female (six adolescents and four adults) soccer players. Three-dimensional motion capture was used to measure lower-extremity joint and segment angles as participants performed an unanticipated cutting task. Hierarchical linear models examined relationships between joint angle characteristics with age and sex. Continuous relative phase was used to quantify intersegment coordination amplitude and variability. These values were compared between age and sex groups using analysis of covariance. Adult males had greater hip flexion angle excursions than adolescent males, while adult females had smaller excursions than adolescent females (p = .011). Females had smaller changes in hip flexion angles (p = .045), greater hip adduction angles (p = .043), and greater ankle eversion angles (p = .009) than males. Adolescents had greater hip internal rotation (p = .044) and knee flexion (p = .033) angles than adults, but smaller changes in knee flexion angles at precontact compared with stance/foot off (p < .001). For intersegment coordination, females were more out-of-phase than males in the foot/shank segment in the sagittal plane. There were no differences in intersegment coordination variability between groups. Differences in joint motion during an unanticipated cutting task were present between age groups and sexes. Injury prevention programs or training programs may be able target specific deficits to lower injury risk and improve performance.

The Effectiveness of Robotic Mechanotherapy in the Rehabilitation of Patients with Shoulder Joint Pathology: Randomized Clinical Trial

INTRODUCTION. Prolonged inactivity associated with exacerbation of a chronic disease or immobilization of the upper limb after injuries and operations leads to the development of functional disorders in the shoulder joint and the development of secondary changes, such as muscle atrophy, contractures, osteoporosis. Therefore, the early application of functional methods of treatment is pathogenetically justified, among which mechanotherapy on robotic devices occupies an important place.&#x0D; AIM. To study the effectiveness of using the FLEX-F04 device in diseases and injuries of the shoulder joint.&#x0D; MATERIALS AND METHODS. According to the inclusion criteria, 60 patients were under our supervision. By random sampling, all patients were divided into two groups of 30 people each. All patients underwent a clinical examination, assessed algofunctional index on the VAS scale, the degree of dysfunction in the arm, shoulder and hand according to the DASH questionnaire, electrothermometry.&#x0D; RESULTS. As a result of treatment and rehabilitation measures, there was a significant increase in the angles of flexion, horizontal adduction, abduction, external and internal rotation in the shoulder joint, a decrease in pain syndrome and an increase in daily activity according to the DASH questionnaire in patients of both groups. In the main group, these indicators were significantly better than in the comparison group. The increase in thermal radiation as a result of the robotic mechanotherapy procedure averaged 0.6 0.1C.&#x0D; DISCUSSION. Robotic mechanotherapy allows movement in the shoulder joint in accordance with its biomechanics, reduces the load on the musculoskeletal system and thereby prevents the appearance or strengthening of the pain component during the procedure. This contributes to an active increase in the amplitude of movements and improvement of the functional capabilities of the shoulder joint, which has a positive effect on daily activity. An increase in thermal radiation in the shoulder joint area during the procedure can serve as an indirect sign of improved microcirculation and neuro-vascular regulation.&#x0D; CONCLUSION. The use of the FLEX-F04 robotic mechanotherapy device of the upper extremities according to the proposed method increases the volume of movements in the shoulder joint, reduces pain syndrome, increases blood circulation of the shoulder joint area and improves neuro-vascular regulation, increases daily household activity. Early inclusion of the device in the rehabilitation process makes it possible to shorten the duration of rehabilitation treatment and achieve a functional range of movements in the shoulder joint.

Overhead squat assessment reflects treadmill running kinematics

PurposeOverhead squat assessment (OHSA) is a pre-activity dynamic movement analysis tool used to define deviations from an ideal motion pattern which known as compensation. Compensatory movements may result from abnormality in myofascial activity, length-tension relationships, neuro-motor control strategies, osteokinematics and arthrokinematics. The aim of this study is to identify the association between selected biomechanical variables of the ankle, knee, hip, pelvis, torso during OHSA and 16 km/h treadmill running tasks.MethodsThirteen national long distance male runners (17.3 ± 0.5 age (years); 5.89 ± 1.95 experience (years), 57.9 ± 3.7 body mass (kg); 175.4 ± 5.7 height (cm)) participated in this 2controlled laboratory study. Three-dimensional kinematics were collected at 250 Hz using a 9-camera Qualisys motion analysis system (Qualisys AB, Goteborg, Sweden) while participants performed 16 km/h treadmill running and OHSA tasks.ResultsCorrelation coefficients demonstrated that OHSA pelvic anterior tilt angle was in a positive association with foot strike (FS), mid-stance (MS), and toe-off (TO) pelvic anterior tilt angles and MS tibial internal rotation on talus, MS ankle pronation, MS hip internal rotation. OHSA pelvic anterior tilt angle was in a negative association with TO hip extension. OHSA maximal hip adduction was positively correlated with MS and stance maximal knee adduction. FS, MS, stance maximal angular dorsiflexion values were positively correlated with OHSA dorsiflexion. Increased OHSA dorsiflexion angle was negatively associated with TO plantar flexion. OHSA pronation was positively associated with MS and stance pronation. MS hip internal rotation, MS hip adduction angles were increased, and MS ankle dorsiflexion was significantly decreased with the increase of trunk forward lean relative to tibia during OHSA.ConclusionsOHSA was associated with some important and dysfunction-related hip, knee and ankle kinematics. Running coaches, may use OHSA as an assessment tool before the corrective training plan to detect injury-related compensation patterns to reduce the risk of injury and improve running technique.

Effect of Different Foot Orthosis Inverted Angles on Walking Kinematics in Females with Flexible Flatfeet.

Although the inverted technique was shown to be more effective compared to other orthotic designs for the treatment of flatfeet, the biomechanical mechanisms underlying the therapeutic effect of the inverted angle orthoses is still unclear. Therefore, the aim of this study was to examine the effect of different inverted angles of foot orthoses on walking kinematics in females with flexible flatfeet. Thirty-one female adults with flexible flatfeet aged 18-35 years old participated in this study. Kinematic data of the hip, knee, and ankle were collected via BTS motion-capture system during walking under three test conditions in random order: with shoes only; with 15° inverted orthoses; and with 25° inverted orthoses. Compared to the shoes only condition, both the 15° and 25° inverted orthotic conditions significantly decreased the maximum ankle plantarflexion angle during loading response, maximum ankle dorsiflexion angle during mid-stance, maximum ankle external rotation angle, and maximum ankle internal rotation angle. The maximum ankle plantarflexion angle at toe-off showed a significant decrease with the 25° inverted angle orthosis compared to both the 15° inverted angle and shoes only conditions. No significant differences were found in the knee kinematic variables, maximum hip extension angle, and maximum hip adduction angle between test conditions. Using inverted orthoses at 15° and 25° inverted angles resulted in significant changes in ankle joint kinematics during walking in female adults with flexible flatfeet. A 25° inverted angle orthosis significantly decreased ankle plantarflexion during push-off, potentially impacting gait mechanics. This suggests that a smaller inverted angle may be more effective for managing flexible flatfeet in female adults.

Fifth metatarsal strain distribution during cutting motions in soccer

ABSTRACT The objective of this study was to determine the fifth metatarsal strain generation mechanism during cutting motions performed while playing soccer using a finite element foot model. Five collegiate soccer players performed the side-step cutting and the cross-step cutting motions to measure the three-dimensional foot kinematics, ground reaction force, and plantar pressure distribution. In addition, a finite-element model of a foot consisting of bony structures, ligaments, and skin was constructed from computed tomography images. Simulations were conducted to perform the cutting motions, using the measured foot motion and distributed load on the plantar surface as boundary conditions for the model. During the side-step cutting, the maximum principal strain on the fifth metatarsal was correlated to forefoot adduction angle during stepping out. For cross-step cutting, the maximum principal strain was correlated with plantar pressure at the distal end of the fifth metatarsal. Therefore, to prevent a fracture, it is necessary to take measures to reduce the lateral bending deformation of the forefoot while stepping out during side-step cutting and to reduce the plantar pressure on the distal end of the fifth metatarsal during cross-step cutting.