Additional Correction Research Articles

Radiological Outcomes of Re-tethering for Adolescent Idiopathic Scoliosis: A 2-to-5-year Follow-Up Case Series After Index Vertebral Body Tethering Failure.

Vertebral Body Tethering (VBT) has been shown to have a less predictable outcome compared to spinal fusion in patients with adolescent idiopathic scoliosis (AIS). Tether breakage is a common mechanical event that sometimes leads to loss of correction. No data has been published that evaluates the outcome of re-tethering in patients who underwent revision surgery for failed VBT, which was the purpose of this study. This is an analysis of a prospectively collected single center database of 290 patients who have had VBT. Patients for this study were included if they have had re-tethering after failed VBT and a minimum follow up of 24 months after index surgery as well as a minimum follow up of 12 months after revision surgery. Revision surgeries included tether exchange, tether reinforcement and/or mono- and bisegmental lateral fusion. Main outcome of interest was curve magnitude at latest follow up. 11 patients were identified who received VBT for 16 curves of which 13 curves have had failed index surgery. Mean follow up from index surgery was 40 months, time between index and revision surgery was 22 months and latest follow up after revision surgery 19 months. Re-tethering resulted in an additional correction of 42% for thoracic and 63% for thoracolumbar curves. These results remained clinically stable with only minor loss of correction at final follow up. No patient underwent or was indicated for spinal fusion. Re-tethering is feasible and able to achieve additional correction and a sustainable result.

Exponential gravity with logarithmic corrections in the presence of axion dark matter

An exponential modified gravity with additional logarithmic corrections is considered with the presence of an axion-like scalar field in the role of dark matter. Axion fields are thought to become important at late-times when the axion-like scalar field oscillates around its vacuum expectation value, mimicking dark matter behaviour. The model is compared with the usual pressureless fluid description of dark matter. Both models are tested with observational data including some of the latest sources, providing similar fits in comparison with the ΛCDM model. Despite results are not statistically relevant to rule out any model, the number of free parameters still favours ΛCDM model, as shown by computing the goodness of the fits.

Contributions beyond direct random-phase approximation in the binding energy of solid ethane, ethylene, and acetylene

The random-phase approximation (RPA) includes a subset of higher than second-order correlation-energy contributions, but stays in the same complexity class as the second-order Møller–Plesset perturbation theory (MP2) in both Gaussian-orbital and plane-wave codes. This makes RPA a promising ab initio electronic structure approach for the binding energies of molecular crystals. Still, some issues stand out in practical applications of RPA. Notably, compact clusters of nonpolar molecules are poorly described, and the interaction energies strongly depend on the reference single-determinant state. Using the many-body expansion of the binding energy of a crystal, we investigate those issues and the effect of beyond-RPA corrections. We find the beneficial effect of quartic-scaling exchange and non-ring coupled-cluster doubles corrections. The nonadditive interactions in compact trimers of molecules are improved by using the self-consistent Hartree–Fock orbitals instead of the usual Kohn–Sham states, but this kind of orbital input also leads to underestimated dimer energies. Overall, a substantial improvement over the RPA with a renormalized singles approach is possible at a modest quartic-scaling cost, which encourages further research into additional RPA corrections.

TECHNOLOGY FOR COMBINING THE RESULTS OF 3D LASER SCANNING FROM DIFFERENT STATIONS USING PLANE MARKS

3D laser scanning is a promising technology gaining popularity and active use worldwide. One of the advantages of 3D laser scanning is the speed of the scanning process and processing of the results. Compared to other geodetic instruments, this technology allows for displaying large objects in a much shorter time and more efficiently. For example, at the construction stage of an industrial plant, scanning enables monitoring the shapes and sizes of all its elements in real time, which is critical for controlling and optimising construction processes. Another important aspect is the geometric complexity of objects. Many objects can have complex shapes or similar elements of considerable length. When combining scanning results from different stations, it is necessary to ensure the accuracy and correct geometry of the object. To combine scan results, designated markers in the form of spheres and plane marks are used. However, unlike spheres, plane markers can be more convenient and economical. In addition, they can be left on the object for a long time, which significantly simplifies the additional scanning or data correction. It is also notable that in our time, the development of laser scanning technologies has led to new scanners that can automatically stitch together scan results by using advanced technology to track characteristic points in the environment. Despite the significant advantages of this new technology in terms of efficiency and accuracy, it is worth noting that it is rather expensive. Accordingly, scanners that do not have this advanced technology rely on alternative methods of stitching together scan results, such as placing plane marks on the object. The article aims to develop a technology for combining the results of 3D laser scanning from different stations using plane marks. The article considers the evaluation of the technical characteristics of the Trimble TX6 laser scanner, the analysis of options for using plane marks to ensure scanning accuracy, and the identification of the advantages and disadvantages of this method. Keywords: 3D laser scanning, plane marks, stitching algorithm, point cloud, Trimble RealWorks.

Universality of quantum time dilation

Time dilation is a difference in measured time between two clocks that either move with different velocities or experience different gravitational potentials. Both of these effects stem from the theory of relativity and are usually associated with classically defined trajectories, characterized by position, momentum, and acceleration. However, when spatial degrees of freedom are treated in a quantum way and a clock is allowed to be in a coherent superposition of either two momenta or two heights, additional quantum corrections to classical time dilation appear, called kinematic and gravitational quantum time dilations, respectively. We show that similarly to its classical counterpart, kinematic quantum time dilation is universal for any clock mechanism, while gravitational quantum time dilation is not. We also show that although both of these effects reduce to incoherent averaging of different classical time dilation contributions, there exists an additional quantum time dilation effect that has no classical analog and can be extracted from higher-order corrections to the system’s Hamiltonian.

Tuning the Actuator Line Method to Properly Modelling Tip Effects in Finite-Length Blades

The Actuator Line Method (ALM) is gaining popularity in wind turbine simulations, as it can better handle some of the challenging operating conditions experienced by modern machines, such as highly turbulent inflows, severe aero-elastic forcing, and complex rotor-to-rotor interactions. However, it still falls behind other medium-fidelity methods such as the Lifting Line Free Vortex Wake (LLFVW) when it comes to resolving tip vortices and their effect on the blade spanwise load profile. The reason for such behavior is still unclear. A recent study suggested that this issue can be solved by reducing the scale of the angle of attack (α) sampling and force insertion towards the tip, without the need of additional corrections. This study builds on these findings to further investigate how the ALM base formulation - in terms of α sampling and force insertion - can be tuned to properly describe tip effects. An in-house ALM tool was employed to simulate a finite, constant-chord, NACA0018 wing, for which high-fidelity blade-resolved CFD (BR-CFD) data are available as benchmark. In the first part of the work, different strategies are outlined, including a novel approach for the de-coupling of the angle of attack sampling step from the force projection one, here called DE-coupled LineAverage (DELA). Their accuracy and sensitivity to ALM numerical settings are assessed at a fixed wing pitch angle of 6°. The analysis is then extended to a wider range of blade pitch angles, benchmarking the new ALM formulation against BR-CFD, ALM with the Dağ and Sørensen correction, and LLFVW in terms of blade loads, tip vortex structure, and computational effort.

AONN-2: An adjoint-oriented neural network method for PDE-constrained shape optimization

PDE-constrained shape optimization has been playing an important role in a large variety of engineering applications. Traditional mesh-dependent shape optimization methods often encounter challenges due to mesh deformation. To address this issue, we present a new adjoint-oriented neural network method, AONN-2, for PDE-constrained shape optimization problems. This method extends the capabilities of the original AONN method [1], which is developed for efficiently solving parametric optimal control problems. AONN-2 inherits from AONN the direct-adjoint looping (DAL) framework for computing the extremum of an objective functional and the involved neural network methods for solving complicated PDEs. Furthermore, AONN-2 expands the application scope to shape optimization by taking advantage of the shape derivatives to optimize the shape represented by discrete boundary points. AONN-2 is a fully mesh-free shape optimization approach, naturally sidestepping issues related to mesh deformation, with no needs for maintaining mesh quality and additional mesh corrections. A series of experimental results are presented, highlighting the flexibility, robustness, and accuracy of AONN-2.

Surveying image segmentation approaches in astronomy

Image segmentation plays a critical role in unlocking the mysteries of the universe, providing astronomers with a clearer perspective on celestial objects within complex astronomical images and data cubes. Manual segmentation, while traditional, is not only time-consuming but also susceptible to biases introduced by human intervention. As a result, automated segmentation methods have become essential for achieving robust and consistent results in astronomical studies. This review begins by summarizing traditional and classical segmentation methods widely used in astronomical tasks. Despite the significant improvements these methods have brought to segmentation outcomes, they fail to meet astronomers’ expectations, requiring additional human correction, further intensifying the labor-intensive nature of the segmentation process. The review then focuses on the transformative impact of machine learning, particularly deep learning, on segmentation tasks in astronomy. It introduces state-of-the-art machine learning approaches, highlighting their applications and the remarkable advancements they bring to segmentation accuracy in both astronomical images and data cubes. As the field of machine learning continues to evolve rapidly, it is anticipated that astronomers will increasingly leverage these sophisticated techniques to enhance segmentation tasks in their research projects. In essence, this review serves as a comprehensive guide to the evolution of segmentation methods in astronomy, emphasizing the transition from classical approaches to cutting-edge machine learning methodologies. We encourage astronomers to embrace these advancements, fostering a more streamlined and accurate segmentation process that aligns with the ever-expanding frontiers of astronomical exploration.

Sodium quantification in skeletal muscle: comparison between Cartesian gradient-echo and radial ultra-short echo time 23Na MRI techniques

BackgroundClinical magnetic resonance imaging (MRI) studies often use Cartesian gradient-echo (GRE) sequences with ~2-ms echo times (TEs) to monitor apparent total sodium concentration (aTSC). We compared Cartesian GRE and ultra-short echo time three-dimensional (3D) radial-readout sequences for measuring skeletal muscle aTSC.MethodsWe retrospectively evaluated 211 datasets from 112 volunteers aged 62.3 ± 12.1 years (mean ± standard deviation), acquired at 3 T from the lower leg. For 23Na MRI acquisitions, we used a two-dimensional Cartesian GRE sequence and a density-adapted 3D radial readout sequence with cuboid field-of-view (DA-3D-RAD-C). We calibrated the 23Na MR signal using reference tubes either with or without agarose and subsequently performed a relaxation correction. Additionally, we employed a six-echo 1H GRE sequence and a multi-echo spin-echo sequence to calculate proton density fat fraction (PDFF) and water T2. Paired Wilcoxon signed-rank test, Cohen dz for paired samples, and Spearman correlation were used.ResultsRelaxation correction effectively reduced the differences in muscle aTSC between the two acquisition and calibration methods (DA-3D-RAD-C using NaCl/agarose references: 20.05 versus 19.14 mM; dz = 0.395; Cartesian GRE using NaCl/agarose references: 19.50 versus 18.82 mM; dz = 0.427).Both aTSC of the DA-3D-RAD-C and Cartesian GRE acquisitions showed a small but significant correlation with PDFF as well as with water T2.ConclusionsDifferent 23Na MRI acquisition and calibration approaches affect aTSC values. Applying relaxation correction is advised to minimize the impact of sequence parameters on quantification, and considering additional fat correction is advisable for patients with increased fat fractions.Relevance statementThis study highlights relaxation correction’s role in improving sodium MRI accuracy, paving the way for better disease assessment and comparability of measured sodium signal in patients.Key points• Differences in MRI acquisition methods hamper the comparability of sodium MRI measurements.• Measured sodium values depend on used MRI sequences and calibration method.• Relaxation correction during postprocessing mitigates these discrepancies.• Thus, relaxation correction enhances accuracy of sodium MRI, aiding its clinical use.Graphical

Toward Accurate Quantum Mechanical Thermochemistry: (1) Extensible Implementation and Comparison of Bond Additivity Corrections and Isodesmic Reactions.

Obtaining accurate enthalpies of formation of chemical species, ΔHf, often requires empirical corrections that connect the results of quantum mechanical (QM) calculations with the experimental enthalpies of elements in their standard state. One approach is to use atomization energy corrections followed by bond additivity corrections (BACs), such as those defined by Petersson et al. or Anantharaman and Melius. Another approach is to utilize isodesmic reactions (IDRs) as shown by Buerger et al. We implement both approaches in Arkane, an open-source software that can calculate species thermochemistry using results from various QM software packages. In this work, we collect 421 reference species from the literature to derive ΔHf corrections and fit atomization energy corrections and BACs for 15 commonly used model chemistries. We find that both types of BACs yield similar accuracy, although Anantharaman- and Melius-type BACs appear to generalize better. Furthermore, BACs tend to achieve better accuracy than IDRs for commonly used model chemistries, and IDRs can be less robust because of the sensitivity to the chosen reference species and reactions. Overall, Anantharaman- and Melius-type BACs are our recommended approach for achieving accurate QM corrections for enthalpies.

Frozen Natural Orbitals for the State-Averaged Driven Similarity Renormalization Group.

We present a reduced-cost implementation of the state-averaged driven similarity renormalization group (SA-DSRG) based on the frozen natural orbital (FNO) approach. The natural orbitals (NOs) are obtained by diagonalizing the one-body reduced density matrix from SA-DSRG second-order perturbation theory (SA-DSRG-PT2). We consider three criteria to truncate the virtual NOs for the subsequent electron correlation treatment beyond SA-DSRG-PT2. An additive second-order correction is applied to the SA-DSRG Hamiltonian to reintroduce correlation effects from the discarded orbitals. The FNO SA-DSRG method is benchmarked on 35 small organic molecules in the QUEST database. When keeping 98-99% of the cumulative occupation numbers, the mean absolute error in the vertical transition energies due to FNO is less than 0.01 eV. Using the same FNO threshold, we observe a speedup of 9 times compared to the conventional SA-DSRG implementation for nickel carbonyl with a quadruple-ζ basis set. The FNO approach enables nonperturbative SA-DSRG computations on chloroiron corrole [FeCl(C19H11N4)] with more than 1000 basis functions, surpassing the current limit of a conventional implementation.

Design and validation of a new ring hoop plane strain test for characterizing the anisotropic plastic behavior of tubular materials

The accurate characterization of the plastic behavior of tubular materials is challenging due to the difficulties in acquiring proper specimens for mechanical testing. In this study, we propose a novel testing technique, namely the ring hoop plane strain Test (RHPST), as a supplementary test for characterizing materials experiencing distinct strain paths compared to standard uniaxial tensile tests. To design a suitable ring specimen’s geometry that satisfies the necessary plane strain conditions, we developed a meta-modelling approach merging response surface method (RSM) and the finite element method (FEM). Experimental tests are conducted on RHPST specimens, and 3D digital image correlation (DIC) technique is used to monitor the strain fields within the specimen's gauge section. However, observations indicate the presence of edge effects on the gauge specimen. These edge effects significantly influence and limit the homogeneity of the plane strain field. To tackle this limitation, a correction procedure is developed for separating the authentic plane strain area, constituting approximately 78% of the RHPST specimen's width. Furthermore, we successfully fabricated a novel grooved ring specimen (GRHPST), which exhibits a wider region of the plane strain state encompassing up to 90% of the gauge width, while minimizing the impact of edge effects. The true stress-true strain curve obtained from the GRHPST specimen exhibits exceptional agreement with the curve predicted using the Hill48 yield criterion. Notably, no additional corrections are required for the measured true stress-true strain curve, thereby affirming the efficacy of the GRHPST specimen as an adept test for characterizing the anisotropic plastic behavior of AA6063 tubes.

Developing a flood monitoring system by utilizing real-time satellite rainfall estimates and water energy budget-based rainfall-runoff inundation model in West Africa

Abstract. The African regions have been affected by frequent flood-related disasters. To support decision-makers in flood disaster management, a real-time flood monitoring system was established in the Niger and Volta basins under the Water disaster platform to enhance climate resilience in Africa (WADiRE-Africa). To bridge a gap between data unavailability and inaccessibility, the near-real-time satellite rainfall data (GSMaP-NRT) was evaluated and found to have a very low correlation (<0.4) with gauge data at daily scales and a higher correlation (>0.7) at monthly scales. The statistically bias-corrected GSMaP-NRT data was used in the Water and Energy Budget-based Rainfall-Runoff-Inundation (WEB-RRI) model to generate hydrological responses of the basins. As the simulated river discharges were overestimated, an additional correction method was employed for the GSMaP-NRT data to match well with observed discharges. The prototype system provides real-time flood information in both basins.

Cooled Spray Technology for Particulate Reduction in a Heavy-Duty Engine

Abstract Cooled spray (CS) technology passively reduces particulate matter (PM) emissions from diesel engines compared to non-CS-equipped diesel engines. CS inserts are mounted near the injector nozzle and control mixing so that the fuel and air can premix while limiting combustion near fuel-rich zones, thereby reducing the formation of particulate matter. CS components contain no moving parts and could be installed as a retrofit or built into new engines. However, CS technology is early in its development, and further investigations are needed to understand the overall performance implications and practicality of the technology. In this paper, we investigate several important aspects of CS, providing a clearer picture of some challenges and potential benefits of CS. Two alignment techniques are used to characterize measurement ease and bias, namely, an optical alignment and spray-plug impact alignment. While the optical technique facilitates alignment more easily, a bias was measured between the optical and spray-plug techniques, suggesting the optical technique may have insufficient accuracy without additional corrections. We also evaluate the engine performance of a well-aligned and poorly aligned CS insert, compared to the baseline configuration. The poorly aligned insert shows slower combustion than the baseline and mixed overall performance. However, the well-aligned insert shows faster combustion than the baseline and PM emission reduction at most operating conditions, with some conditions showing PM reduction up to 80%. The results of this paper highlight the alignment challenges of CS technology as well as the potential PM reduction benefit of the technology.

Accurate implementation of two-level asynchronous domain decomposition solvers

Recently, asynchronous coarse-grid correction has been achieved within additive Schwarz-type and primal Schur domain decomposition frameworks. Both additive and multiplicative coarse-grid corrections were discussed, however, the implemented asynchronous Schwarz-type solver with additive correction relies on the specific design of the restricted additive Schwarz (RAS) method, and also requires an overlap between the subsets of unknowns. In this paper, we first highlight a gap between the theoretical analysis from the literature and the associated RAS implementation. It turns out that communications delays would actually need to be bounded in order to fit the theory. This has to be stressed since, despite the asynchronous nature of the solver, the coarse-grid correction requires non-blocking global synchronization, which is subject to communications bottleneck. Second, we propose an implementation approach which applies to a wider class of additive Schwarz-type methods while still coping with the bounded delays requirement.

Results of a VOSH Trip to Panama

Background: Optometric services in many parts of the world are unavailable, or when available, limited to those individuals who have the resources and proximity to gain access to them. Recognizing this disparity in availability of eyecare services, teams from developed countries have been volunteering to provide eyecare in these areas with such a need for many years. Over time, these groups have also adopted a mission of enhancing the local infrastructure to create long-term improvement. Method: All records from a VOSH clinical trip to Panama were retrospectively analyzed to determine the prevalence of ocular conditions diagnosed. Results: As expected, the mean refractive error was low hyperopia, however, most astigmatism was oriented against-the-rule. There was also an earlier need for an additional near correction. There were 488 instances of non-refractive ocular conditions documented with cataracts constituting 75.6% of these. Documented measurement of intraocular pressures (IOP) demonstrated most findings fell within the accepted normal range of 11-22mmHg, however, there were occurrences above and below this range. Conclusion: The trip benefited many individuals while also highlighting the need for a long-term solution by improving the public health infrastructure. It demonstrated the immediate impact possible with short-term intervention while also diagnosing ocular conditions that would require long term management. Without an improvement in access to local care these conditions cannot be successfully treated or managed.

Results of a VOSH Trip to Panama

Background: Optometric services in many parts of the world are unavailable, or when available, limited to those individuals who have the resources and proximity to gain access to them. Recognizing this disparity in availability of eyecare services, teams from developed countries have been volunteering to provide eyecare in these areas with such a need for many years. Over time, these groups have also adopted a mission of enhancing the local infrastructure to create long-term improvement. Method: All records from a VOSH clinical trip to Panama were retrospectively analyzed to determine the prevalence of ocular conditions diagnosed. Results: As expected, the mean refractive error was low hyperopia, however, most astigmatism was oriented against-the-rule. There was also an earlier need for an additional near correction. There were 488 instances of non-refractive ocular conditions documented with cataracts constituting 75.6% of these. Documented measurement of intraocular pressures (IOP) demonstrated most findings fell within the accepted normal range of 11-22mmHg, however, there were occurrences above and below this range. Conclusion: The trip benefited many individuals while also highlighting the need for a long-term solution by improving the public health infrastructure. It demonstrated the immediate impact possible with short-term intervention while also diagnosing ocular conditions that would require long term management. Without an improvement in access to local care these conditions cannot be successfully treated or managed.

Medium-induced photon bremsstrahlung in neutrino-nucleus, antineutrino-nucleus, and electron-nucleus scattering from multiple QED interactions

Interactions of charged leptons with nuclei and the naive tree-level kinematics of these processes are affected by radiation of photons induced by the QED nuclear medium. We evaluate cross section modifications at leading orders of the number of correlated interactions inside the nucleus, known as the opacity expansion. We derive results for soft and collinear types of the bremsstrahlung at the first three orders in opacity and generalize them to higher orders. We present the leading in opacity energy spectra of soft and collinear photons and radiative energy loss inside the nucleus for experiments with lepton kinematics in the GeV energy range. At leading power of the Glauber soft-collinear effective field theory, the soft radiation is further resummed to all orders both in opacity and in the electromagnetic coupling constant. We find that the soft and collinear medium-induced radiation is vacuumlike, and additional corrections are power suppressed. Despite the negligible modification to the induced photon spectra, the nuclear medium-induced radiation sizably affects the broadening of charged leptons in the direction orthogonal to their propagation. Published by the American Physical Society 2024

Systemic immune-inflammatory indicators and bone mineral density in chronic kidney disease patients: A cross-sectional research from NHANES 2011 to 2018.

The purpose of this study was to look at the relationship between the Systemic Immune Inflammatory Index (SII) and bone mineral density (BMD) in the pelvis, left upper and lower limbs, lumbar spine, thoracic spine, and trunk in a chronic kidney disease (CKD) population in the United States. The National Health and Nutrition Examination Survey (2011-2016) yielded 2302 people with CKD aged >18 years. CKD was defined as eGFR less than 90 ml/min/1.73 m2 or eGFR greater than 90 ml/min/1.73 m2 with urine ACR greater than 30 mg/L.SII was calculated as PC * (NC / LC) from platelet count (PC), neutrophil count (NC), and lymphocyte count (LC). Multiple logistic regression was used to examine the relationship between BMD and SII at different sites in CKD patients, smoothed curve-fitting and generalized weighting models were used to investigate non-linear relationships, and a two-tailed linear regression model was used to find potential inflection points in the model. We discovered a negative correlation between SII and pelvic BMD among 2302 participants after controlling for gender, age, and race [β = -0.008; 95% confidence value -0.008; 95% confidence interval (CI) -0.014, -0.002]. Lower PEBMD was related to increasing SII (trend p = 0.01125). After additional correction, only pelvic BMD remained adversely linked with SII [value -0.006; 95% CI -0.012, -0.000, p = 0.03368]. Smoothed curve fitting revealed a consistent inverse relationship between SII and pelvic BMD. Further stratified analyses revealed a substantial positive negative connection between SII and pelvic BMD in individuals who did not have hypertension, diabetes, a BMI of more than 30 kg/m2, or stage 2 CKD. The connection between SII and PEBMD in people without diabetes revealed a strong inverted U-shaped curve. In individuals with CKD in the United States, there was a negative connection between the systemic immunoinflammatory index (SII) and pelvic BMD. The SII might be a low-cost and simple test for CKD-related BMD loss.

Experience of using the portable gamma spectrometer MKS AT6101D for in situ measurements of the density of <sup>137</sup>Cs soil contamination in the Bryansk region of Russia

We have tested applicability of the commercially available portable spectrometer-dosimeter MKS AT6101D (the manufacturer: ATOMTEX, Belarus) to measure the density of 137Cs soil contamination (inventory of 137Cs in soil) in situ. The study was performed in 2015–2020 at the territories of the Bryansk region of Russia contaminated due to the Chernobyl accident. The in situ measurements were performed in the 17 ground plots (7 grasslands and 10 kitchengargens) for which the 137Cs inventory and the mean migration depth of the radionuclide in soil was available from laboratory (ex situ) measurements of soil samples. It was found that the in situ data obtained with the method that was provided by the manufacturer of the instrument required additional correction on the vertical distribution of 137Cs in the soil. The correction procedure was developed; in 2020–2021, it has been successfully tested in 114 kitchengarden plots located at the settlements in the zones of radioactive contamination in the Bryansk region.