Additional Properties Research Articles

Chicken combs as a raw material in the manufacturing of chopped semi-finished horse meat products

Food safety stands at the forefront of social policies across nations. Secondary meat raw materials present a potential source for meat production. Our research objective was to analyze the nutritional value and functional-technological properties of horsemeat and protein additives of animal origin, particularly secondary meat raw materials such as chicken combs. We also sought to empirically determine their optimal quantities for developing chopped semi-finished horsemeat products, which are protein-enriched and have high consumer appeal. We aimed to establish efficient methods for utilizing collagen-rich materials like chicken combs. Additionally, we assessed the feasibility of using slaughter by-products and the potential of minced meat and pastry products as valuable raw material sources. Based on our findings, we deduce that chicken combs, a lower-value secondary raw material, possess notable physical, chemical, and safety properties. These traits underline its high biological worth and environmental benignity, qualifying it as a viable ingredient for protein enrichment and as an additive in minced meat and paste product manufacturing.

Interferon-Alpha Impairs Neoplastic Vasculogenesis in a 3D iPSC-Based Model of JAK2V617F+ Myeloproliferative Neoplasms

Overt Myelofibrosis (MF) is an end-stage subtype of BCR-ABL1 negative myeloproliferative neoplasms (MPN), which is characterized by progressive bone marrow (BM) fibrosis resulting in loss of normal hematopoietic support as well as inflammatory and vascular complications. While aberrant neoangiogenesis is known to participate in the pathogenesis of MF, Erba et al. (Am J Pathol, 2017) suggested the occurrence of endothelial-to-mesenchymal transition (EndMT) in BM and spleen of MF patients (pts). Given the relevance of endothelial cells (EC) for MF development and the occurrence of JAK2V617F-mutated EC in MPN pts, targeting of the vascular niche has emerged as a promising therapeutic strategy. To untangle the impact of the JAK2V617F mutation on human vasculogenesis, we leveraged high-purity and clonal patient-specific induced pluripotent stem cell (iPSC)-derived EC (iEC) harboring either the JAK2V617F mutation in hetero- (JAK2V617F HET) or homozygosis (JAK2V617F HOM). JAK2 WT and CRISPR-repaired isogenic JAK2 WT (both referred to as JAK2 WT) were used as controls. In a first set of in vitro experiments, JAK2V617F mutated iEC showed a significantly increased proliferation rate in comparison to JAK2 WT iEC. We next evaluated the effect of selected drugs on iEC viability to assess their vascular toxicity. While treatment with 1 µM each of fedratinib, anagrelide or venetoclax led to a decrease in iEC viability (all **p ≤ .01), no significant alterations were observed with 1 µM ruxolitinib (RUX) or 1000 U/ml interferon-alpha (IFNa). Overall, no differences between the 3 genotypes were observed, pointing towards a genotype-independent mode of action. Given the favorable vascular toxicity profile of IFNa, as shown above, its anti-angiogenic potential was then assessed via endothelial tube formation assays. Pre-incubation with 1000 U/ml IFNa prior to seeding of the cells onto a reconstituted basement membrane matrix led to a significant inhibition of capillary-like structures formation in JAK2 WT and JAK2V617F HET or HOM iEC. One of the limitations of 2D culture assays is the lack of 3D homotypic cellular organization, compromising its translational value. Therefore, we established an adaptive 3D fibrin-based model to recapitulate, in vitro, the critical EC-pericyte crosstalk required for formation and maturation of blood vessels. Recent studies highlighted the capacity of BM mesenchymal stem cells (MSC) to differentiate into pericytes. Therefore, we seeded JAK2 WT and JAK2V617F HETor HOM iEC with or without MSC in fibrin hydrogels. MSC and iEC were visualized using different PKH dyes as fluorescent cell linkers to enable live tracking of vascular tree formation. Although self-assembly of JAK2 WT and JAK2V617F HET or HOM iEC into vessel-like structures was observed in the generated monocultures, the presence of MSC in the cocultures led to a significant increase of the formed network area (Fig. 1), hence recapitulating the critical support of pericytes. While acute IFNa exposure did not alter vascular tree formation (Fig. 1), a separate pre-treatment of iEC and MSC prior to cocultivation, significantly impaired neoplastic vasculogenesis (Fig. 2). Interestingly, interactive microscopy image analysis revealed an increased MSC/iEC interaction in JAK2V617F HOM pre-treated cocultures (*p ≤ .05). Bulk RNA-sequencing of JAK2 WT and JAK2V617F HET or HOM iEC treated for 24h with 1000 U/ml showed a strong response to IFNa. Future analysis may unravel a JAK2V617F specific transcription signature. Moreover, we induced EndMT in our 3D iEC-MSC coculture model by treatment with pro-inflammatory cytokines, reflected by the loss of EC markers (e.g. Claudin 5) and upregulation of mesenchymal markers (e.g. aSMA) by immunofluorescence. We are currently evaluating the capacity of RUX vs IFNa to inhibit EndMT. In summary, we show that IFNa impairs neoplastic vasculogenesis in a robust in vitro 3D coculture system that enables precise control of cellularity and genotype. Our model is a valuable tool to decipher the poorly investigated impact of IFNa on the BM microenvironment. In addition, its translational and scalable properties (e.g. by integrating primary or iPSC-derived hematopoietic cells) will allow us to study the impact of additional drugs on MPN-associated fibrotic transformation of the BM.

One-pot coatable fluorinated polyurethane resin solution for robust superhydrophobic anti-fouling surface

Superhydrophobic coating materials have considerable potential in a wide range of industrial applications because of their anti-fouling properties. However, their application is limited due to the instability caused by their fragile structure, resulting in superhydrophobic failure. Moreover, achieving superhydrophobic materials requires complex processes and specialized equipment. Polyurethane (PU) is a promising as a material for superhydrophobic coatings because of its inherent advantages such as adhesion properties and mechanical toughness. In this study, a fluorinated polyurethane (FPU) solution was synthesized using a one-pot method. Further, two types of particles with varying solvent miscibility were blended into an FPU solution. The alterations in surface morphologies, resulting from variations in evaporation conditions due to the different particle compositions, were confirmed through scanning electron microscopy (SEM), which leads to a difference in hydrophobicity. The prepared coating material was shown to tiny thorn-like surface morphology, which allowed it to demonstrate a high water contact angle of 157°, along with additional anti-fouling properties. Furthermore, the resulting superhydrophobic coating materials demonstrate mechanical robustness under cyclic tape peel test even after 10 cycles and cross-cut test Our study offers an effective approach for achieving superhydrophobic properties while maintaining mechanical durability, thereby advancing the development of high-performance superhydrophobic materials.

Sitagliptin Induces Tolerogenic Human Dendritic Cells

Sitagliptin, an anti-diabetic drug, is a dipeptidyl peptidase (DPP)-4/CD26 inhibitor with additional anti-inflammatory and immunomodulatory properties. In this study, we investigated for the first time the effect of sitagliptin on the differentiation and functions of human dendritic cells generated from monocytes (MoDCs) for 4 days using the standard GM-CSF/IL-4 procedure. LPS/IFN-γ treatment for an additional 24 h was used for maturation induction of MoDCs. Sitagliptin was added at the highest non-cytotoxic concentration (500 µg/mL) either at the beginning (sita 0d protocol) or after MoDC differentiation (sita 4d protocol). Sitagliptin impaired differentiation and maturation of MoDCs as judged with the lower expression of CD40, CD83, CD86, NLRP3, and HLA-DR, retention of CD14 expression, and inhibited production of IL-β, IL-12p70, IL-23, and IL-27. In contrast, the expression of CD26, tolerogenic DC markers (ILT4 and IDO1), and production of immunoregulatory cytokines (IL-10 and TGF-β) were increased. Generally, the sita 0d protocol was more efficient. Sitagliptin-treated MoDCs were poorer allostimulators of T-cells in MoDC/T-cell co-culture and inhibited Th1 and Th17 but augmented Th2 and Treg responses. Tolerogenic properties of sitagliptin-treated MoDCs were additionally confirmed by an increased frequency of CD4+CD25+CD127- FoxP3+ Tregs and Tr1 cells (CD4+IL-10+FoxP3-) in MoDC/T-cell co-culture. The differentiation of IL-10+ and TGF-β+ Tregs depended on the sitagliptin protocol used. A Western blot analysis showed that sitagliptin inhibited p65 expression of NF-kB and p38MAPK during the maturation of MoDCs. In conclusion, sitagliptin induces differentiation of tolerogenic DCs, and the effect is important when considering sitagliptin for treating autoimmune diseases and allotransplant rejection.

Design and performance analysis of alcohols sensing using photonic crystal fiber in terahertz spectrum

This research suggests an optical sensor to detect alcohol in beverages and liquids that is based on Zeonex backdrop material. The core of the sensor is made up of six hexahedron-shaped cores and heptagonal cladding with circular air holes. The development and implementation of a limited element evaluation to assess the sensing capabilities of sensor technology using PCF were executed using the COMSOL Multiphysics software. With negligible confinement losses, a highly sensitive H-PCF structure has been proposed for the THz range. With sensitivities of 89.50 %, 91.80 %, and 90.81 %, respectively, at the monitoring region of 1 THz, it can detect three distinct alcohols, including ethanol, butanol, and propanol. At a monitoring frequency of 1 THz, the confinement losses for the first alcohol are 5.45 × 10−08 dB/m, the second alcohol is 6.01 × 10−08 dB/m, and the third alcohol is 5.60 × 10−08 dB/m. Furthermore, the essential graphical representations of additional optical properties, including the effective mode index, effective area, and total power fraction, are extensively examined. Thus, it is evident that this sensor could be utilized to detect alcohol in a variety of environments, given that terahertz (THz) wave pulses are commonly employed in both chemical processes and the food and beverage industries.

Development of ternary polymeric films based on cassava starch, pea flour and green banana flour for food packaging

The development of alternative materials to replace plastics used in food packaging is an important approach to reducing environmental pollution and minimizing harmful impacts on ecosystems. In this study, biopolymeric films were formulated using cassava starch (Manihot esculenta Crantz), pea flour (Pisum sativum) and green banana flour (Musa sp.) to obtain a material for application in food packaging. The influence of a plasticizer on the optical and physicochemical properties of the films was analyzed and the synergy between higher concentrations of starch and plasticizer resulted in films with low opacity. In addition, the morphology, thermal, mechanical and barrier properties were examined. The film with the best formulation (p < 0.05) contained 12 g cassava starch, 3.6 g pea flour and 30 % glycerol (the maximum levels of the experiment). This film presented average values of thickness, moisture, solubility, opacity, maximum strength (F), maximum tensile stress (σ), elongation at break (ε) and elasticity (E) of 0.47 mm, 19.95 %, 87.45 %, 20.93 %, 9.30 N, 1.75 MPa, 30.10 % and 5.93 %, respectively. This research demonstrates the potential application of films obtained by combining starches from different sources. The sustainable production of environmentally-friendly packaging provides an alternative to fossil-based plastics, which have well-documented adverse effects on the environment.

Effect of Strain Gradient on Elastic and Plastic Size Dependency in Polycrystalline Copper

This study unveils the presence of size effect not only in the plastic regime but also in the elastic regime under strain gradient. This discovery emerges from a comprehensive set of experiments encompassing micro-cantilever bending and micro-pillar compression tests. Subsequent finite element analysis serves to not only expose the limitation of classical continuum theory but also to effectively demonstrate the enhanced predictive capabilities of couple stress theory in both elastic and plastic size effects. To incorporate couple stress theory, a systematic and rigorous finite element analysis-based optimization was devised to determine length scale parameters, which are additional material properties in couple stress theory. The resulting length scale parameters for polycrystalline copper were found to be 0.536 and 0.669µm in the elastic and plastic regimes, respectively. The study also explores the physical interpretation of these length scale parameters in both regimes.

Ultra-strong and ductile amorphous-crystalline Ti-Zr-Hf-Nb-Ta/Co-Ni-V nanolaminate thin films

Films with a combination of high strength, large ductility, and high thermodynamic stability are always pursued for industrial applications. Here, we prepared the amorphous-crystalline Ti-Zr-Hf-Nb-Ta/Co-Ni-V nanolaminate with hardness and yield strength of 7.4 GPa and 3.8 GPa, and large deformability of ∼70%. The ductility is attributed to two aspects. One is the Ti-Zr-Hf-Nb-Ta/Co-Ni-V layer interfaces acted as barriers to obstruct the propagation of nanocracks at the heavily deformed stage. Another is that amorphous layers acted as dislocation sinks promoting the dislocations to get annihilated when undergoing plastic flow, maintaining the plastic deformability of the crystalline layers. After annealing at 873 K for 1 h, the Co-Ni-V layer changes to a V-rich amorphous layer with minor nanocrystals, while the Ti-Zr-Hf-Nb-Ta layer transforms to a Ni-rich amorphous layer, due to the diffusion of Co and Ni. This chemical partitioning and consequent amorphization lead to the enhanced hardness and yield strength of 9.4 GPa and 4.5 GPa, but low ductility. In addition, the microstructure and mechanical properties of the nanolaminate can be further optimized by adjusting substrate temperature, layer thickness, and annealing process. The findings provide a new avenue for improving the mechanical properties of nanolaminates in a controllable manner.

A comparative study of polymer viscosity modifiers: Flow field challenges & alternative trends

In recent years, substantial advancements have been achieved in augmenting the energy efficiency of hydraulic fluids through the integration of polymers. This study employs a multiscale approach, encompassing an analysis of polymer coil size evolution and flow field characteristics, with the aim of investigating the behavior of both dipole and non-dipole polymers within the host solvent. The ultimate goal is to establish a comprehensive understanding of the correlation between atomic properties of additives and the macroscopic properties of the polymer solution.To achieve this, the study employs an atomistic-continuum hybrid model that combines Brownian Dynamics and Lattice Boltzmann techniques within the bead-spring concept framework. Four chains, each comprising 64 particles, are subjected to varying shear rates. The primary focus centers on the examination of alterations in the radius of gyration and the velocity field within the polymer solution. Notably, the inclusion of dipole-dipole interactions exerts a profound influence on the configuration of the polymers. The results illuminate that non-dipole polymers display a more pronounced coupling with bulk flow hydrodynamics, leading to the confinement of particle motion in directions perpendicular to the primary stream. In contrast, dipole polymers experience a slower increase in coil size when compared to their non-dipole counterparts. These findings furnish valuable insights for the enhancement of energy-efficient hydraulic fluids and contribute to a fundamental comprehension of polymer behavior in lubricants, charting the course for the development of advanced hydraulic fluids in the future.

Stable and weakly additive cost sharing in shortest path problems

In a shortest path problem, agents seek to ship their respective demands; and the cost on a given arc is linear in the flow. Previous works have proposed cost allocations falling in the core of the associated cooperative game. The present work combines core selection with weak versions of the additivity axiom, which allows to characterize a new family of rules. The demander rule charges each demander the cost of their shortest path, and the supplier rule charges the cost of the second-cheapest path while splitting the excess payment equally between access suppliers. With three or more agents, the demander rule is characterized by core selection and a specific version of cost additivity. Convex combinations of the demander rule and the supplier rule are axiomatized using core selection, a second version of cost additivity, and two additional axioms that ensure the fair compensation of intermediaries. With three or more agents, the demander rule is characterized by core selection and a specific version of cost additivity. Finally, convex combinations of the demander rule and the supplier rule are axiomatized using core selection, a second version of cost additivity, and two additional fairness properties.

Additive Manufacturing and Mechanical Properties of Auxetic and Non-Auxetic Ti24Nb4Zr8Sn Biomedical Stents: A Combined Experimental and Computational Modelling Approach

The effect of plaque deposition (atherosclerosis) on blood flow behaviour is investigated via computational fluid dynamics and structural mechanics simulations. To mitigate the narrowing of coronary artery atherosclerosis (stenosis), the computational modelling of auxetic and non-auxetic stents was performed in this study to minimise or even avoid these deposition agents in the future. Computational modelling was performed in unrestricted (open) conditions and restricted (in an artery) conditions. Finally, stent designs were produced by additive manufacturing, and mechanical testing of the stents was undertaken. Auxetic stent 1 and auxetic stent 2 exhibit very little foreshortening and radial recoil in unrestricted deployment conditions compared to non-auxetic stent 3. However, stent 2 shows structural instability (strut failure) during unrestricted deployment conditions. For the restricted deployment condition, stent 1 shows a higher radial recoil compared to stent 3. In the tensile test simulations, short elongation for stent 1 due to strut failure is demonstrated, whereas no structural instability is noticed for stent 2 and stent 3 until 0.5 (mm/mm) strain. The as-built samples show a significant thickening of the struts of the stents resulting in short elongations during tensile testing compared to the simulations (stent 2 and stent 3). A modelling framework for the stent deployment system that enables the selection of appropriate stent designs before in vivo testing is required. This leads to the acceleration of the development process and a reduction in time, resulting in less material wastage. The modelling framework shall be useful for doctors designing patient-specific stents.

Mending a broken heart by biomimetic 3D printed natural biomaterial-based cardiac patches: a review.

Myocardial infarction is one of the major causes of mortality as well as morbidity around the world. Currently available treatment options face a number of drawbacks, hence cardiac tissue engineering, which aims to bioengineer functional cardiac tissue, for application in tissue repair, patient specific drug screening and disease modeling, is being explored as a viable alternative. To achieve this, an appropriate combination of cells, biomimetic scaffolds mimicking the structure and function of the native tissue, and signals, is necessary. Among scaffold fabrication techniques, three-dimensional printing, which is an additive manufacturing technique that enables to translate computer-aided designs into 3D objects, has emerged as a promising technique to develop cardiac patches with a highly defined architecture. As a further step toward the replication of complex tissues, such as cardiac tissue, more recently 3D bioprinting has emerged as a cutting-edge technology to print not only biomaterials, but also multiple cell types simultaneously. In terms of bioinks, biomaterials isolated from natural sources are advantageous, as they can provide exceptional biocompatibility and bioactivity, thus promoting desired cell responses. An ideal biomimetic cardiac patch should incorporate additional functional properties, which can be achieved by means of appropriate functionalization strategies. These are essential to replicate the native tissue, such as the release of biochemical signals, immunomodulatory properties, conductivity, enhanced vascularization and shape memory effects. The aim of the review is to present an overview of the current state of the art regarding the development of biomimetic 3D printed natural biomaterial-based cardiac patches, describing the 3D printing fabrication methods, the natural-biomaterial based bioinks, the functionalization strategies, as well as the in vitro and in vivo applications.

Tuning the electronic and optical properties of small organic acenedithiophene molecular crystals for photovoltaic applications: First principles calculations.

Periodic density functional theory was employed to investigate the impact of chemical modifications on the properties of π-conjugated acenedithiophene molecular crystals. Here, we highlight the importance of the β-methylthionation effect, the position of the sulfur atoms of the thiacycle group and their size, and the number of central benzene rings in the chemical modification strategy. Our results show that the introduction of the methylthio groups at the β-positions of the thiophene and the additional benzene ring at the center of the BDT crystal structure are a promising strategy to improve the performance of organic semiconductors, as observed experimentally. We found that β-MT-ADT exhibits large charge carrier mobility, which is in good agreement with the experimental results and comparable to that of rubrene. In addition, the electronic and optical properties of these ambipolar materials suggest promising performances with β-MT-ADT > ADT >β-MT-NDT > NDT > BEDT-BDT >β-MT-BDT > BDT. Moreover, functionalization with thiacycle-fused sulfur atoms of different sizes and numbers improve the properties of BDT but is still less efficient than the methylthionation effect. Overall, our findings suggest a promising molecular modification strategy for possibly high performance ambipolar organic semiconducting materials.

Ideals In Matrix Rings Over Commutative Rings

In this research, we discuss about ideal of matrix rings over commutative rings and its properties. The research of ideal in matrix rings is important because it is the basic structure for constructing factor rings in matrix rings. This research is a literature research that examines and develops research that has been done previously. We develop ideal concepts in an usually ring into matrix rings over commutative rings. By showing the sufficient and necessary condition of ideal of matrix rings over commutative rings, we show the form of ideal in matrix rings over commutative rings. Then, by using the properties of two ideal in a ring, we show the properties of intersection, addition and multiplication of two ideal in matrix rings over commutative rings. The result of this research is the form of ideal in matrix rings over commutative rings is the set of all matrices over the ideal in commutative rings. Then, the intersection, addition and multiplication of two ideal in matrix rings over commutative rings is also an ideal of matrix rings over commutative rings.

On inequality constraints in well-known optimisation problems: properties and applications

This work studies transportation, assignment, transshipment, shortest path, and dynamic lot sizing problems. Particularly, it shows how to modify their formulations to handle excess supply and node elimination. The paper proceeds by using the conservation of flow to derive the original constraints of these problems. Thereafter, a general form of the conservation of flow is used to reformulate these problems. The results are problems with inequality constraints. This paper shows that solving each of these new formulations returns the same optimal solution as its original form. It also shows how problems with inequality constraints can handle excess supply and node elimination. Along the way, some additional properties of these alternative formulations are explored.

The effects of high-pressure, enzymatic, and high-pressure-assisted enzymatic treatment on the properties of soluble dietary fibers and their use in jelly prepared with grape waste extract.

This study aimed to investigate the physicochemical attributes of soluble dietary fibers (SDFs) of grape, which were isolated after enzymatic (using cellulase [0.1MPa/60°C/30min]), high-pressure (HP) (100MPa/60°C/30min), or HP-assisted enzymatic treatment (using cellulase [100MPa/60°C/30min]), then to evaluate textural properties, color, and microbiological load of jelly prepared using grape waste extract and either pectin or SDF types. HP-assisted enzymatic treatment increased glucose adsorption capacity by more than 50%, and the water-holding capacity of SDF more than twofold as compared to the levels measured in untreated-SDF. After treatments, glucose and galactose contents decreased, whereas fructose, mannose, xylose, arabinose, and rhamnose ratios increased. The arabinose ratio increased more than twice by the effect of HP, whereas the xylose content increased almost fivefold with HP-assisted enzymatic treatment. For the textural properties of jelly, HP-assisted enzymatic treated-SDF provided almost double values in gel strength and adhesiveness than those contributed by untreated-SDF. It was followed by HP-treated SDF jelly. The results showed that HP-assisted enzymatic treatment developed more similar outcomes with enzymatic treatment, rather than HP treatment alone. HP-assisted enzymatic hydrolysis is recommended for treating SDF for use in jelly due to its synergistic effect. PRACTICAL APPLICATION: High-pressure-assisted cellulase treatment provided the best properties to SDF for jelly. In combined treatment, impacts of cellulase treatment were more prominent than HP effects. Therefore, the use of HP assistance for enzymatic hydrolysis shortens the processing time. Moreover, the technological and functional properties (water holding, glucose adsorption capacity, and monosaccharide composition) of the combined treated-fiber can improve. In addition, the color and textural properties of the jelly prepared with this treated-fiber can be enhanced. In this way, it may be possible to obtain a good thickening agent. This material can also be an alternative to pectin.

Sonochemical-assisted synthesis of copper oxide nanoparticles with the plant-mediated approach and comparative evaluation of some biological activities.

The present study reported a green approach for the sonochemical-assisted synthesis (SAS) of copper oxide nanoparticles (CuO NPs) by using the aqueous extract of the Ficus johannis plant. The aqueous extract was obtained using ultrasonic-assisted extraction (15min, 45°C) and microwave-assisted extraction (15min, 450 w). Next, the as-prepared extracts were used in a plant-mediated approach for the green synthesis of CuO NPs. The synthesized CuO NPs have been characterized via different techniques including X-ray diffraction (XRD), scanning electron microscopy (SEM), dynamic light scattering (DLS), ultraviolet-visible absorption, photoluminescence, and Fourier-transformed infrared (FT-IR) spectroscopic techniques. As observed, a broad absorption band around 375nm clarified the successful synthesis of CuO NPs. From the SEM analysis, the average particle size of the prepared CuO NPs was estimated below 50nm. In addition, the antimicrobial, antioxidant, and antifungal properties of the aqueous extracts as well as the as-prepared CuO NPs were evaluated by different assays. These included the release of protein, nucleic acids, disk diffusion method, minimum inhibitory concentration (MIC) and minimum bactericidal concentration (MBC), and time-killing assays.

Rings close to periodic with applications to matrix, endomorphism and group rings

We examine those matrix rings whose entries lie in periodic rings equipped with some additional properties. Specifically, we prove that the famous Diesl’s question whether or not a ring R being nil-clean implies that the matrix ring M n ( R ) over R is also nil-clean for all n ≥ 1 is paralleling to the corresponding implication for (abelian, local) periodic rings. Besides, we study when the endomorphism ring E ( G ) of an abelian group G is periodic. Concretely, we establish that E ( G ) is periodic exactly when G is finite as well as we find a complete necessary and sufficient condition when the endomorphism ring over an abelian group is strongly m-nil clean for some natural number m thus refining an “old” result concerning strongly nil-clean endomorphism rings. Responding to a question when a group ring is periodic, we show that if R is a right (resp., left) perfect periodic ring and G is a locally finite group, then the group ring RG is periodic, too. We finally find some criteria under certain conditions when the tensor product of two periodic algebras over a commutative ring is again periodic. In addition, some other sorts of rings very close to periodic rings, namely the so-called weakly periodic rings, are also investigated.

Enhancing rheology and physico-mechanical properties of ceramic slurries: Effect of the addition of various types of deflocculants

This study investigated the impact of various types of deflocculants with different chemical composition on ceramic slurries rheology. Organic and inorganic plasticizers were substituted for sodium silicate plasticizers in floor tile recipes, and their effects on rheology were assessed. The interactions of these materials with the silicate and ceramic slurry in terms of synergistic, antagonistic, and additive properties were then determined. In addition, the physico-mechanical properties of the ceramic bodies obtained using commercial plasticizers were investigated. Microstructural analysis using scanning electron microscopy (SEM) and mineralogical properties using x-ray diffraction (XRD) were performed. Results revealed that the addition of silicate to the slurry had a synergistic effect on rheology, reducing second viscosity to 50 s with a thixotropy ratio of 22%. Moreover, the flexural strength of the sample with 1% silicate addition increased by 13.6%, indicating positive effects on physico-mechanical properties. SEM analysis indicated the formation of a more uniform dispersion of particles with silicate addition. These findings suggest that incorporating silicate into ceramic slurries can effectively enhance both rheology and physico-mechanical properties, holding significant implications for ceramic tile and product manufacturing.

Synthesis, spectrophotometric, pharmacology and theoretical investigation of a new electron transfer complex of 8-hydroxyquinoline with oxalic acid in different polar solvents

Preparation, characterization, and investigation of a novel organic charge transfer (CT) complex were carried out, with a focus on exploring its antibacterial and antifungal characteristics. Theoretical analysis backs up the experimental findings. CT complex formed was synthesized between 8-hydroxyquinoline (8HQ) and oxalic acid (OA) at RT (room temperature). Different analyses were used to describe the CT complex, including 1H-NMR, FTIR, TGA/DTA, and UV-vis spectra (in different solvents). These indicate that the CT interaction is linked to proton transfer from OA to 8HQ and the subsequent development of ‘N+__H…O-“ type bonding. On the basis of wave number, the CT complex and reactants are distinguished in FTIR spectra. By using Thermo gravimetric Analysis/Differential Thermal Analysis (TGA/DTA) tests, the thermal stability of complicated and thorough corrosion was examined. Through UV-visible spectroscopy, physical characteristics like ECT (interaction energy), RN (resonance energy), ID (ionization potential), f (oscillator strength) and ΔG (free energy) were calculated. The εCT (molar extinction coefficient), the KCT (formation constant), and additional physical properties of this complex were calculated by the Benesi-Hildebrand equation in order to determine its 1:1 stoichiometry. The biological properties are also supported by theoretical study. The protein, Human Serum Albumin (HSA), is observed to bind with CT complex, as shown by molecular docking and the observed binding energy value is −167.04 kcal/mol. Molecular dynamics (MD) simulation 100 ns run was used to refine docking results and binding free energy was calculated using MM-PBSA. This study introduces a novel CT complex, offering fresh perspectives on molecular interactions. Communicated by Ramaswamy H. Sarma