Addition-fragmentation Chain Transfer Mechanism Research Articles

Blend Composites Based on Polystyrene–CdSe Quantum Dots and Polystyrene–Gold Nanoparticles Hybrid Systems

Polystyrenes of different molecular masses are synthesized by controlled radical polymerization via the reversible addition fragmentation chain transfer mechanism. The resulting polymers are used for designing nanocomposites based on cadmium selenide quantum dots and gold nanoparticles. It is demonstrated that the photoluminescence of quantum dots in the sol grows appreciably during continuous irradiation for 5–6 h but is reduced during the “light switching off–switching on” process. It is shown that, upon the addition of gold nanoparticles, the photoluminescence of quantum dots in the sols changes insignificantly.

Reversible addition-fragmentation chain-transfer polymerization: Fundamentals and use in practice

Modern approaches to the synthesis of tailor-made macromolecules by radical polymerization proceeding through the reversible addition-fragmentation chain-transfer mechanism are considered. The mechanism of this process and the experimental and calculation methods for determining its main kinetic parameters are discussed. Particular emphasis is placed on the problems of designing copolymers of various microstructures, including random, gradient, and block copolymers.

Ternary copolymers of acrylic acid, N-isopropylacrylamide, and butyl acrylate: Synthesis and aggregative behavior in dilute solutions

Narrowly dispersed hydrophilic block and random copolymers of acrylic acid and N-isopropylacrylamide of various compositions and molecular masses are synthesized for the first time by controlled radical polymerization via the reversible addition-fragmentation chain-transfer mechanism. The copolymers are used for the synthesis of ternary copolymers with n-butyl acrylate. As shown by dynamic light scattering, the resulting amphiphilic copolymers can form stable dispersions in diluted aqueous solutions. It is found that the effective hydrodynamic radii of dispersion particles may be controlled via variation both in the primary structure of the ternary copolymer, i.e., the amount and sequence of hydrophilic and hydrophobic units, and in the external stimuli, i.e., the temperature and pH of a solution.

Composites based on liquid-crystalline polymers with terminal functional groups and inorganic nanoparticles

A method of controlled radical polymerization via the reversible addition fragmentation chain transfer mechanism is used to synthesize LC polymers with functional terminal thiol groups. These polymers are used to create composites containing gold nanoparticles at a concentration of up to 40 wt % and capable of LC ordering. The structural, thermodynamic, and optical properties of the composites are studied. It is shown that the spatial separation of mesogenic groups and groups responsible for the binding of a macromolecule with nanoparticles makes it possible to considerably widen the concentration range of nanoparticles while preserving the LC state of the composites.

Controlled copolymerization of acrylonitrile in bulk via the reversible addition-fragmentation chain-transfer mechanism

The pseudoliving radical binary copolymerization of acrylonitrile with methyl acrylate, styrene, n-butyl acrylate, and tert-butyl acrylate in bulk in the presence of the reversible addition-fragmentation chain-transfer agent dibenzyl trithiocarbonate is performed for the first time. The addition of trithiocarbonate makes it possible to prepare a narrowly dispersed visually optically transparent copolymer in a wide range of monomer-feed compositions even at limiting conversions. Conditions for the synthesis of acrylonitrile copolymers with controlled molecular masses and narrow molecular-mass distributions are ascertained. In the above copolymers, the trithiocarbonate group is shown to be located within the chain.

Kinetic approach to modeling the radical polymerization of styrene in the presence dibenzyl trithiocarbonate

A mathematical model of the kinetics of the radical polymerization of styrene in the presence of dibenzyl trithiocarbonate by the reversible addition-fragmentation chain transfer mechanism with cross-termination of radicals and intermediates and quadratic termination of intermediates is developed. The adequacy of the polymerization mechanism underlying the model and the related mathematical formalism are tested by comparing the calculated and measured values of the average molecular-weight characteristics of resulting polystyrene.

Controlled radical (co)polymerization of (meth)acrylic esters via the reversible addition-fragmentation chain-transfer mechanism

The homopolymerization of acrylic and fluoroacrylic esters mediated by benzyl dithiobenzoate and dibenzyl trithiocarbonate proceeds in the controlled mode via the reversible addition-fragmentation chain-transfer mechanism, while the controlled radical polymerization of methacrylic esters is not effected under these conditions. The molecular-mass characteristics of the copolymers of acrylic and methacrylic esters may be satisfactorily controlled by benzyl dithiobenzoate-mediated copolymerization when the content of acrylic esters is no less than 50 mol %. If a reversible addition-fragmentation chain-transfer agent active with respect to only one of the monomers is used, compositionally homogeneous narrowly dispersed copolymers are formed via the azeotropic copolymerization of the monomers up to high conversions. The controlled copolymerization of N-vinylpyrrolidone and fluoroacrylates allows the synthesis of alternating narrowly dispersed amphiphilic copolymers with properties different from those of alternating copolymers with a broad molecular-mass distribution.

Controlled synthesis of multiblock copolymers by pseudoliving radical polymerization via the reversible addition-fragmentation chain-transfer mechanism

With the use of two classes of reversible addition-fragmentation chain-transfer agents—dithiobenzoates and trithiocarbonates—multiblock copolymers based on styrene and n-butyl acrylate, which are the best-studied monomers in these processes, are synthesized. It is shown that the polymers containing dithiobenzoate and trithiocarbonate groups are highly efficient for the synthesis of block copolymers, which is independent of the number of stages at which the polymeric RAFT agents are used in polymerization: In all cases, the polymeric RAFT agent is fully consumed in the polymerization of the “alien” monomer. The mechanism governing chain formation during the synthesis of multiblock copolymers, that is, the character of monomer insertion into the polymer chain, via one or both ends, is studied. It is found that the order of monomer loading determines the ratio of chains growing through one or two ends. The thermal stability of amphiphilic multiblock copolymers, their solubility in various solvents, and self-organizing ability are investigated.

Controlled synthesis of polyacrylonitrile via reversible addition-fragmentation chain-transfer pseudoliving radical polymerization and its thermal behavior

The polymerization of acrylonitrile mediated by various trithiocarbonates as reversible addition-fragmentation chain-transfer agents is studied. It is shown that, when polymerization is performed in DMSO, a narrowly dispersed PAN with a controlled molecular mass can be prepared. The pseudoliving radical polymerization of acrylonitrile is conducted for the first time via the reversible addition-fragmentation chaintransfer mechanism in carbon dioxide at an increased pressure. The structure of the polymers is investigated via NMR and IR spectroscopy. As shown by DSC and IR pyrolysis, the thermal behavior of PAN is determined by its molecular mass, the width of the molecular-mass distribution, and the conditions of synthesis. The incorporation of functional groups of the reversible addition-fragmentation chain-transfer agent into a macromolecule changes the structure of the polyconjugated system and makes it possible to control the conditions of its formation.

Pseudoliving polymerization of vinyl acetate mediated by reversible addition-fragmentation chain-transfer agents

The homopolymerization of vinyl acetate mediated by dithiobenzoates and trithiocarbonates as reversible addition-fragmentation chain-transfer agents is studied. The polymerization of vinyl acetate is characterized by some distinct features: (i) a substantial role of chain-termination reactions involving radical intermediates in the kinetics of the process that increases as the concentrations of the reversible additionfragmentation chain-transfer agent and the initiator increase and as temperature decreases and (ii) the occurrence of side reactions of chain transfer to monomers and polymers. The role of these reactions significantly increases with conversion of the monomer. Thus, in order to prepare a narrowly dispersed PVA via the reversible addition-fragmentation chain-transfer mechanism, the process should be conducted to small conversions (15–20%) at moderately high temperatures (80°C) and at a small molar excess of the reversible addition-fragmentation chain-transfer agent with respect to the initiator. A technique for the synthesis of block copolymers based on PVA and poly(n-butyl acrylate) via the reversible addition-fragmentation chain-transfer mechanism is developed.

Kinetics of pseudoliving free-radical copolymerization of styrene and methyl methacrylate by the reversible addition fragmentation chain-transfer mechanism

The kinetics of copolymerization of styrene with methyl methacrylate in the presence of tert-butyl dithiobenzoate as a reversible addition fragmentation chain-transfer agent has been studied. Formation of radical intermediates has been investigated. In a wide range of monomer mixture compositions, the kinetic features of pseudoliving radical copolymerization of this monomer pair in the presence of both a low-molecular-mass reversible addition fragmentation chain-transfer (RAFT) agent and a polymer RAFT agent being formed are close to the corresponding features of the homopolymerization of styrene.

Influence of the microstructure of acrylic acid-n-butyl acrylate copolymers prepared by pseudoliving radical polymerization by the reversible addition-fragmentation chain transfer mechanism on their surface activity in aqueous solutions

The influence of the microstructure of acrylic acid-n-butyl acrylate copolymers prepared by pseudoliving radical polymerization by the reversible addition-fragmentation chain transfer mechanism on their surface activity in aqueous solutions was studied. The mechanisms of adsorption of polymer macromolecules on the phase boundary, accounting for the difference in the behavior of the random and block copolymers, were suggested. The dependence of the surface activity on the chain flexibility was elucidated. This dependence is very significant for the random copolymers and insignificant for the block copolymers.

Addition‐Fragmentation Chain Transfer to Polymer in the Free Radical Ring‐Opening Polymerization of an Eight‐membered Cyclic Allylic Sulfide Monomer

AbstractSummary: A detailed investigation of chain transfer to polymer during free radical ring‐opening polymerization of the eight‐membered disulfide monomer 2‐methyl‐7‐methylene‐1,5‐dithiacyclooctane (MDTO) is presented. It has been shown that extensive chain transfer to polymer occurs involving both poly(MDTO) radicals and cyanoisopropyl radicals. Significant decreases in molecular weight were observed when cyanoisopropyl radicals were generated in the presence of poly(MDTO) in the absence of monomer. The molecular weight distribution (MWD) obtained from polymerization of MDTO in the presence of pre‐added poly(MDTO) was markedly different from that obtained without pre‐added polymer. A kinetic model was constructed in an attempt to quantitatively describe the chain transfer to polymer process based on the addition fragmentation chain transfer mechanism. It was found however that the simulated MWDs were considerably broader than the experimental MWDs, which were similar to the Schulz‐Flory distribution.Mechanism for chain transfer to polymer.imageMechanism for chain transfer to polymer.

Polymerization of Methyl Methacrylate Using Dimanganese Decacarbonyl in the Presence of Organohalides

Dimanganese decacarbonyl (Mn2(CO)10) initiates the radical polymerization of methyl methacrylate (MMA) in the presence of a variety of organic halides including C6H5CH2Br, Me2C(Br)CO2Et, BrCH2C(Br)CH2, and ClCH2C(Cl)CH2 in toluene at 60−90 °C. When using allylic halides (e.g., BrCH2C(Br)CH2 or BrCH2C(CO2Me)CH2), the number-average molecular weights and molecular weight distributions of the PMMA were both low and relatively narrow. The production of relatively low molecular weight polymers when using allylic halides could be explained by an addition-fragmentation chain-transfer mechanism and this is supported by end-group analysis.