Acyl Donor Research Articles

Characterization of multiple lysophosphatidic acid acyltransferases in the plant pathogen Xanthomonas campestris.

Phosphatidic acid (PA) is the precursor of most phospholipids like phosphatidylethanolamine, phosphatidylglycerol, and cardiolipin. In bacteria, its biosynthesis begins with the acylation of glycerol-3-phosphate to lysophosphatidic acid (LPA), which is further acylated to PA by the PlsC enzyme. Some bacteria, like the plant pathogen Xanthomonas campestris, use a similar pathway to acylate lysophosphatidylcholine to phosphatidylcholine (PC). Previous studies assigned two acyltransferases to PC formation. Here, we set out to study their activity and found a second much more prominent function of these enzymes in LPA to PA conversion. This PlsC-like activity was supported by the functional complementation of a temperature-sensitive plsC-deficient Escherichia coli strain. Biocomputational analysis revealed two further PlsC homologs in X. campestris. The cellular levels of the four PlsC-like proteins varied with respect to growth phase and growth temperature. To address the question whether these enzymes have redundant or specific functions, we purified two recombinant, detergent-solubilized enzymes in their active form, which enabled the first direct biochemical comparison of PlsC isoenzymes from the same organism. Overlapping but not identical acyl acceptor and acyl donor preferences suggest redundant and specialized functions of the X. campestris PlsC enzymes. The altered fatty acid composition in plsC mutant strains further supports the functional differentiation of these enzymes.

Effect of the water content and the lengthening of fatty acids chain on the iCALB‐catalyzed esterification in deep eutectic solvents

AbstractFour Deep Eutectic Solvents (DES) based on choline chloride (ChCl) and different hydrogen bond donors (1,4‐butanediol, glycerol, isosorbide, and urea) were tested as reaction medium for the immobilized Candida antarctica B (iCALB) lipase‐catalyzed esterification of fatty acids with n‐butanol. Although the strong hydrogen bonds between DES components were expected to lower their reactivity, all except urea, competed in the esterification reaction. To study the effect of acyl group donor and water, different chain length of saturated fatty acids (ranging from 6:0 to 18:0) and water content (ranging from 0, 1, 2 or 3 molar ratio of water/ChCl) were tested in the lipase‐catalyzed esterification with n‐butanol in ChCl:urea (1:2, molar ratio). When the incubation was performed in the absence of water, the shorter the fatty acid chain length, the higher the conversion. Upon water addition, a drastic increase in the esterification rate of all the fatty acids was observed and, conversely to what occurred in the anhydrous media, the longer the fatty acid chain length, the higher the conversion. Results suggest that water concentration in the DES medium possesses a multifactorial effect, as it influences the enzyme activity, the solvent viscosity, the DES structure, and the interaction between DES components, substrates, and enzymes, thus determining the efficiency and yield of the esterification reaction.

Allele-dependent expression and functionality of lipid enzyme phospholipid:diacylglycerol acyltransferase affect diatom carbon storage and growth.

In the acyl-CoA-independent pathway of triacylglycerol (TAG) synthesis unique to plants, fungi, and algae, TAG formation is catalyzed by the enzyme phospholipid:diacylglycerol acyltransferase (PDAT). The unique PDAT gene of the model diatom Phaeodactylum tricornutum strain CCMP2561 boasts 47 single nucleotide variants within protein coding regions of the alleles. To deepen our understanding of TAG synthesis, we observed the allele-specific expression of PDAT by the analysis of 87 published RNA-sequencing (RNA-seq) data and experimental validation. The transcription of one of the two PDAT alleles, Allele 2, could be specifically induced by decreasing nitrogen concentrations. Overexpression of Allele 2 in P. tricornutum substantially enhanced the accumulation of TAG by 44% to 74% under nutrient stress; however, overexpression of Allele 1 resulted in little increase of TAG accumulation. Interestingly, a more serious growth inhibition was observed in the PDAT Allele 1 overexpression strains compared with Allele 2 counterparts. Heterologous expression in yeast (Saccharomyces cerevisiae) showed that enzymes encoded by PDAT Allele 2 but not Allele 1 had TAG biosynthetic activity, and 7 N-terminal and 3 C-terminal amino acid variants between the 2 allele-encoded proteins substantially affected enzymatic activity. P. tricornutum PDAT, localized in the innermost chloroplast membrane, used monogalactosyldiacylglycerol and phosphatidylcholine as acyl donors as demonstrated by the increase of the 2 lipids in PDAT knockout lines, which indicated a common origin in evolution with green algal PDATs. Our study reveals unequal roles among allele-encoded PDATs in mediating carbon storage and growth in response to nitrogen stress and suggests an unsuspected strategy toward lipid and biomass improvement for biotechnological purposes.

Structural identification of catalytic His158 of PtMAC2p from Pseudozyma tsukubaensis, an acyltransferase involved in mannosylerythritol lipids formation.

Mannosylerythritol lipids (MELs) are extracellular glycolipids produced by the basidiomycetous yeast strains. MELs consist of the disaccharide mannosylerythritol, which is acylated with fatty acids and acetylated at the mannose moiety. In the MEL biosynthesis pathway, an acyltransferase from Pseudozyma tsukubaensis, PtMAC2p, a known excellent MEL producer, has been identified to catalyze the acyl-transfer of fatty acid to the C3'-hydroxyl group of mono-acylated MEL; however, its structure remains unclear. Here, we performed X-ray crystallography of recombinant PtMAC2p produced in Escherichia coli and homogeneously purified it with catalytic activity in vitro. The crystal structure of PtMAC2p was determined by single-wavelength anomalous dispersion using iodide ions. The crystal structure shows that PtMAC2p possesses a large putative catalytic tunnel at the center of the molecule. The structural comparison demonstrated that PtMAC2p is homologous to BAHD acyltransferases, although its amino acid-sequence identity was low (<15%). Interestingly, the HXXXD motif, which is a conserved catalytic motif in the BAHD acyltransferase superfamily, is partially conserved as His158-Thr159-Leu160-Asn161-Gly162 in PtMAC2p, i.e., D in the HXXXD motif is replaced by G in PtMAC2p. Site-directed mutagenesis of His158 to Ala resulted in more than 1,000-fold decrease in the catalytic activity of PtMAC2p. These findings suggested that His158 in PtMAC2p is the catalytic residue. Moreover, in the putative catalytic tunnel, hydrophobic amino acid residues are concentrated near His158, suggesting that this region is a binding site for the fatty acid side chain of MEL (acyl acceptor) and/or acyl-coenzyme A (acyl donor). To our knowledge, this is the first study to provide structural insight into the catalytic activity of an enzyme involved in MEL biosynthesis.

Hydrophobic enzymatic cellulose nanocrystals via a novel, one-pot green method

Cellulose nanocrystals (CNCs) are a rapidly growing bionanomaterial with remarkable properties that have been harnessed in various applications, including mechanical reinforcement, biomedical materials, and coatings. However, for non-water-based applications, hydrophobization of CNCs while preserving their integrity is crucial. In this study, we propose a new eco-friendly, one-pot surface esterification method for hydrophobizing enzymatic CNCs in aqueous suspension without solvent exchange. By establishing an appropriate set of reaction conditions, it was possible to create a miscibility gradient that enabled a low-cost, and renewable fatty acid to be utilized as an acyl donor and solvent, allowing direct hydrophobic modification of the as-produced aqueous suspension of enzymatic CNC. FT-IR and AFM-IR analyses confirmed the formation of ester groups, while 13C NMR confirmed the emergence of carboxyl groups. XPS revealed a high degree of surface substitution (0.39) in the modified CNC, while a substantial increase in contact angle (from 40 to approximately 90°) quantitatively confirmed the high efficiency of the enzymatic CNC's hydrophobic modification. Additionally, important properties such as morphology remained practically unchanged, except for a slight increase in thermal stability and crystallinity of the CNCs. Therefore, hydrophobic enzymatic CNCs were successfully produced via a simple, scalable, and environmentally friendly approach without compromising their properties. These hydrophobic CNCs have the potential to enhance nanocomposite compatibility, improve packaging performance for electronics and foods, optimize adhesion in coatings, and offer advancements in cosmetics and drug delivery. However, comprehensive studies are needed to confirm their applicability across these sectors.

A chemical catalyst enabling histone acylation with endogenous acyl-CoA

Life emerges from a network of biomolecules and chemical reactions catalyzed by enzymes. As enzyme abnormalities are often connected to various diseases, a chemical catalyst promoting physiologically important intracellular reactions in place of malfunctional endogenous enzymes would have great utility in understanding and treating diseases. However, research into such small-molecule chemical enzyme surrogates remains limited, due to difficulties in developing a reactive catalyst capable of activating inert cellular metabolites present at low concentrations. Herein, we report a small-molecule catalyst, mBnA, as a surrogate for a histone acetyltransferase. A hydroxamic acid moiety of suitable electronic characteristics at the catalytic site, paired with a thiol-thioester exchange process, enables mBnA to activate endogenous acyl-CoAs present in low concentrations and promote histone lysine acylations in living cells without the addition of exogenous acyl donors. An enzyme surrogate utilizing cellular metabolites will be a unique tool for elucidation of and synthetic intervention in the chemistry of life and disease.

Biosynthesis, Characterization, and Bioactivity of L-Alanyl-L-tyrosine in Promoting Melanin Synthesis.

L-Alanyl-L-tyrosine (L-Ala-Tyr) is a dipeptide formed by the condensation of L-alanine methyl ester and L-tyrosine. After entering the body, it can be rapidly broken down to release tyrosine. In this study, L-Ala-Tyr was successfully prepared by using α-ester acyltransferase as biocatalyst and alanine methyl ester (L-Ala-OMe) and tyrosine (L-Tyr) as acyl donor and nucleophile, respectively. The dipeptide yield was increased from 15 to 50% by optimizing the conditions: boric acid-borax (0.2 mol/L), 30°C, pH 9.5, 2:1 acyl donor to nucleophile ratio, DES (ChCl/urea), and 15%(v/v) water content. The catalytic product is then isolated and purified. The structure of the product was identified by high-performance liquid chromatography, mass spectrometry, proton nuclear magnetic resonance, and carbon spectroscopy. Its biological activity was preliminarily determined by the B16-F10 mouse melanoma cell model. The results showed that the purity of L-Ala-Tyr prepared by the separation and purification method of this study was 96.8%, and the mass spectrometry and nuclear magnetic resonance spectroscopy showed that the structure of the peptide was consistent with the expected structure. In addition, the preliminary physiological activity identification results show that L-Ala-Tyr has no toxic effect on cells in the concentration range of 100-800 μmol·L-1, and at the optimal concentration, compared with the positive control 8-methoxypsoralen, it can promote the production of melanin.

Transglutaminase in Foods and Biotechnology.

Stabilization and reusability of enzyme transglutaminase (TGM) are important goals for the enzymatic process since immobilizing TGM plays an important role in different technologies and industries. TGM can be used in many applications. In the food industry, it plays a role as a protein-modifying enzyme, while, in biotechnology and pharmaceutical applications, it is used in mediated bioconjugation due to its extraordinary crosslinking ability. TGMs (EC 2.3.2.13) are enzymes that catalyze the formation of a covalent bond between a free amino group of protein-bound or peptide-bound lysine, which acts as an acyl acceptor, and the γ-carboxamide group of protein-bound or peptide-bound glutamine, which acts as an acyl donor. This results in the modification of proteins through either intramolecular or intermolecular crosslinking, which improves the use of the respective proteins significantly.

Kinetics and Mechanism of Azole n-π*-Catalyzed Amine Acylation.

Azole anions are highly competent in the activation of weak acyl donors, but, unlike neutral (aprotic) Lewis bases, are not yet widely applied as acylation catalysts. Using a combination of in situ and stopped-flow 1H/19F NMR spectroscopy, kinetics, isotopic labeling, 1H DOSY, and electronic structure calculations, we have investigated azole-catalyzed aminolysis of p-fluorophenyl acetate. The global kinetics have been elucidated under four sets of conditions, and the key elementary steps underpinning catalysis deconvoluted using a range of intermediates and transition state probes. While all evidence points to an overarching mechanism involving n-π* catalysis via N-acylated azole intermediates, a diverse array of kinetic regimes emerges from this framework. Even seemingly minor changes to the solvent, auxiliary base, or azole catalyst can elicit profound changes in the temporal evolution, thermal sensitivity, and progressive inhibition of catalysis. These observations can only be rationalized by taking a holistic view of the mechanism and a set of limiting regimes for the kinetics. Overall, the analysis of 18 azole catalysts spanning nearly 10 orders of magnitude in acidity highlights the pitfall of pursuing ever more nucleophilic catalysts without regard for catalyst speciation.

Improving efficiency and reducing enzyme inactivation during lipase-mediated epoxidation of α-pinene in a double-phase reaction system.

Chemoenzymatic epoxidation of olefin mediated by lipase is a green and environmentally friendly alternative process. However, the mass transfer barrier and lipase deactivation caused by the traditional organic-water biphasic reaction system have always been the focus of researchers' attention. To overcome these issues, we investigated the effects of reaction temperature and two important substrates (H2O2 and acyl donor) on the epoxidation reaction and interfacial mass transfer. As a result, we determined the optimal reaction conditions: a temperature of 30°C, 30wt-% H2O2 as the oxygen source, and 1M lauric acid as the oxygen carrier. Additionally, by simulating the conditions of shaking flask reactions, we designed a batch reactor and added a metal mesh to effectively block the direct contact between high-concentration hydrogen peroxide and the enzyme. Under these optimal conditions, the epoxidation reaction was carried out for 5h, and the product yield reached a maximum of 93.2%. Furthermore, after seven repetitive experiments, the lipase still maintained a relative activity of 51.2%.

Chemoselective Lipase-Catalyzed Synthesis of Amido Derivatives from 5-Hydroxymethylfurfurylamine.

The acylations of furfurylamine and 5-hydroxymethylfurfurylamine (HMFA) have been studied finding immobilized Candida antarctica lipase B (CALB) as an ideal biocatalyst. CALB was used immobilized on two different supports (Novozyme 435 and EziG-CALB), with the polymer-coated controlled porosity glass carrier material from EnginZyme being an excellent carrier to yield an active and stable enzymatic preparation for the acylation of the primary amine group. The amount of the acyl donor in the reaction was a key factor to achieve the mono- and chemoselective N-protection of HMFA with large excess of ethyl acetate leading to the formation of the N,O-diacetylated product. Thus, a series of 16 nonactivated esters were used to selectively modify the amine group of HMFA, obtaining 9 hydroxy amides under mild reaction conditions and with quantitative yields through chromatography-free transformations. The influence of substrate concentration was studied, resulting in complete conversions in all cases after 22 h (100-1000 mM). Excellent results were observed at 100 and 200 mM of HMFA, while higher concentrations led to longer reaction times and, to some extent, the formation of the diacetylated product (up to 7% after 22 h at 1 M). After this optimization, a metric analysis was performed to confirm the high sustainability of the presented process (E-factor of 1.1 excluding solvents) upon intensification of the biotransformation to 1 g at 200 mM HMFA concentration. The possibility of obtaining orthogonally protected HMFA-derived amido esters has been achieved through a clean and sequential one-pot process using EziG-CALB, which involved the use of ethyl methoxy acetate as the nonactivated ester for N-acylation and the activated vinyl acetate for O-protection.

Expanding the Substrate Scope of Acyltransferase LovD9 for the Biosynthesis of Statin Analogues.

This study identifies new acyl donors for manufacturing statin analogues through the acylation of monacolin J acid by the laboratory evolved acyltransferase LovD9. Vinyl and p-nitrophenyl esters have emerged as alternate substrates for LovD9-catalyzed acylation. While vinyl esters can reach product yields as high as the ones obtained by α-dimethyl butyryl-S-methyl-3-mercaptopropionate (DMB-SMMP), the thioester for which LovD9 was evolved, p-nitrophenyl esters display a reactivity even higher than DMB-SMMP for the first acylation step yet the acylation product yield is lower. The reaction mechanisms were elucidated through quantum mechanics (QM) calculations.

Lipase catalyzed chemo-enzymatic synthesis of propranolol: A newer enzymatic approach

The biocatalytic processes are greener and safer alternatives for synthesis of drug and drug intermediates. This study reports one such approach of chemo-enzymatic synthesis of propranolol, a β-adrenergic receptor blocker. A green synthetic route was employed for synthesis of propranolol using enzymatic kinetic resolution. Racemic mixture of secondary alcohol [1-chloro-3-(naphthalen-1-yloxy)propan-2-ol] (RS)-5 was synthesized chemically in two step reaction and further its enzymatic kinetic resolution was carried out by using lipase to synthesize enantiomeric forms (R)-5 and S-(6) of propranolol. The kinetic resolution of (RS)-5 involves the transesterification of secondary racemic alcohol in which vinyl acetate is used as acyl donor. Initially, we screened commercially available lipases for kinetic resolution and of all the screened lipases Addzyme 001 showed the best results. The several reaction parameters such as organic solvent, acyl donor, temperature, reaction time and enzyme concentration were optimized to improve rate of reaction and to achieve maximum enantioselectivity. Addzyme 001 at 40 mg shows the maximum conversion rate of 49% using cyclohexane as the organic solvent, vinyl acetate as the acyl donor and it was found that the reaction yield was higher for (R)-5 along with the (S)-6 (eep = 98%, ees = 97%) at 40 °C in 48 h. Further, the treatment of (R)-5 with isopropyl amine resulted into formation of (S)-propranolol eep = 98%, and overall yield 29% independently. To synthesize (R)-propranolol, S-(6) acetate was produced enzymatically and was further deacylated by chemical hydrolysis for the production of (R)-propranolol. This study reports newer approach for synthesis of (R) and (S) propranolol using chemoenzymatic route.

Recent Advances in Biocatalytic Acylation of Alcohols as a Sustainable Target for Flavor and Fragrance Compounds

Abstract: Currently, the use of enzymes as efficient tools for the preparation of highly valuable molecules in various industries has proven to be a tremendous development. The preparation of esters via biotechnological processes constitutes an important eco-friendly approach for several industries, especially in the field of flavour and fragrances. This is particularly due to the accrued customer’s interest in products labelled as natural ensured by using enzymes as natural catalysts. This mini-review article is dedicated to underline the recent advances (from 2010 to 2022) in the bio-acylation of achiral and chiral alcohols (esterification and transesterification). The preparation conditions, such as enzyme nature, acyl donor, solvents, etc., are highlighted.

1H, 13C and 15N backbone and sidechain assignment of the Burkholderia mallei acyl carrier protein.

Acyl carrier proteins (ACPs) are universally conserved proteins amongst different species and are involved in fatty acid synthesis. Bacteria utilize ACPs as acyl carriers and donors for the synthesis of products such as endotoxins or acyl homoserine lactones (AHLs), which are used in quorum sensing mechanisms. In this study, wehave expressed isotopically labeled holo-ACP from Burkholderia mallei in Escherichia coli to assign 100% of non-proline backbone amide (HN) resonances, 95.5% of aliphatic carbon resonances and 98.6% of aliphatic hydrogen sidechain resonances.

Enzymatic acylation of blueberry (Vaccinium ashei) pomace anthocyanins and determination of their cytotoxic properties

To expand the application of acylated blueberry pomace anthocyanins in food and nutraceuticals, their enzymatic acylation reaction and the cytotoxic response were explored. In this study, enzymatic acylation was carried out with cyanidin-3-O-glucoside (C3G) as the main body and Novozyme 435 as the biocatalyst. With a series of improvements, the reaction was carried out under the conditions of lauric acid as the acyl donor, tert-amyl alcohol as the reaction medium, the molar ratio of C3G to lauric acid of 1:10, the reaction time of 24 h and the reaction temperature of 60 °C, and 35.29 % acylation rate was obtained. Moreover, it was found that the lipophilicity, thermostability and photostability of the enzymatic acylated blueberry pomace anthocyanins were improved compared with the untreated blueberry pomace anthocyanins. Cytotoxicity studies showed that acylated blueberry pomace anthocyanins inhibited tumor cells (HeLa, HepG2, and B16 cells) significantly and were less toxic to normal cells (L929 cells) at the maximum concentration (1000 µg/mL) and the longest duration of action (72 h). This study established a method for acylation of blueberry pomace anthocyanins that may be applied to other natural sources of anthocyanins.

Antioxidant Activities of Dihydromyricetin Derivatives with Different Acyl Donor Chain Lengths Synthetized by Lipozyme TL IM.

Dihydromyricetin (DHM) is a phytochemical with multiple bioactivities. However, its poor liposolubility limits its application in the field. In this study, DHM was acylated with different fatty acid vinyl esters to improve its lipophilicity, and five DHM acylated derivatives with different carbon chain lengths (C2-DHM, C4-DHM, C6-DHM, C8-DHM, and C12-DHM) and different lipophilicity were synthesized. The relationship between the lipophilicity and antioxidant activities of DHM and its derivatives was evaluated with oil and emulsion models using chemical and cellular antioxidant activity (CAA) tests. The capacity of DHM derivatives to scavenge 1,1-diphenyl-2-picrylhydrazyl radical (DPPH•) and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) radical (ABTS+•) was similar to that of DHM, except for C12-DHM. The antioxidant activity of DHM derivatives was lower than that of DHM in sunflower oil, while C4-DHM exhibited better antioxidant capacity in oil-in-water emulsion. In CAA tests, C8-DHM (median effective dose (EC50) 35.14 μmol/L) exhibited better antioxidant activity than that of DHM (EC50: 226.26 μmol/L). The results showed that in different antioxidant models, DHM derivatives with different lipophilicity had various antioxidant activities, which has guiding significance for the use of DHM and its derivatives.

Dynamic protein deacetylation is a limited carbon source for acetyl-CoA–dependent metabolism

The ability of cells to store and rapidly mobilize energy reserves in response to nutrient availability is essential for survival. Breakdown of carbon stores produces acetyl-CoA (AcCoA), which fuels essential metabolic pathways and is also the acyl donor for protein lysine acetylation. Histones are abundant and highly acetylated proteins, accounting for 40% to 75% of cellular protein acetylation. Notably, histone acetylation is sensitive to AcCoA availability, and nutrient replete conditions induce a substantial accumulation of acetylation on histones. Deacetylation releases acetate, which can be recycled to AcCoA, suggesting that deacetylation could be mobilized as an AcCoA source to feed downstream metabolic processes under nutrient depletion. While the notion of histones as a metabolic reservoir has been frequently proposed, experimental evidence has been lacking. Therefore, to test this concept directly, we used acetate-dependent, ATP citrate lyase-deficient mouse embryonic fibroblasts (Acly-/- MEFs), and designed a pulse-chase experimental system to trace deacetylation-derived acetate and its incorporation into AcCoA. We found that dynamic protein deacetylation in Acly-/- MEFs contributed carbons to AcCoA and proximal downstream metabolites. However, deacetylation had no significant effect on acyl-CoA pool sizes, and even at maximal acetylation, deacetylation transiently supplied less than 10% of cellular AcCoA. Together, our data reveal that although histone acetylation is dynamic and nutrient-sensitive, its potential for maintaining cellular AcCoA-dependent metabolic pathways is limited compared to cellular demand.

Recombinant PNPLA1 catalyzes the synthesis of acylceramides and acyl acids with selective incorporation of linoleic acid

Loss-of-function mutations in patatin-like phospholipase domain-containing protein 1 (PNPLA1) cause autosomal recessive congenital ichthyosis, and altered PNPLA1 activity is implicated in the pathogenesis of atopic dermatitis and other common skin diseases. To examine the hypothesis that PNPLA1 catalyzes the synthesis of acylceramides and acyl acids, we expressed and partially purified a soluble, truncated form of PNPLA1 in Escherichia coli, (PNPLA1trun) along with the related protein PNPLA2 (ATGL, adipose triglyceride lipase) and coactivator CGI-58. Liposomal substrates were incubated with recombinant enzymes for 0.5–24 h and products analyzed by HPLC-UV and LC-MS. Using trilinolein or dilinolein substrates, PNPLA1trun, like ATGLtrun, catalyzed lipolysis and acyltransferase reactions with 2–30% conversion into linoleic acid, monolinolein, and trilinolein. CGI-58 enhanced ATGL-catalyzed lipolysis as previously reported, but transacylase activity was not enhanced with ATGL or PNPLA1. In matching the proposed activity in vivo, PNPLA1 catalyzed acyl transfer from trilinolein and dilinolein donors to omega-hydroxy ceramide, omega-hydroxy glucosylceramide, and omega-hydroxy acid acceptors to form acylceramide, glucosyl-acylceramide, and acyl acid, respectively, albeit with only ∼0.05% conversion of the substrates. Notably, in experiments comparing dilinolein vs. diolein acyl donors, PNPLA1 transferred linoleate with 3:1 selectivity over oleate into acylceramide. These results support the role for PNPLA1 in the synthesis of acylceramides and acyl acids in epidermis and suggest that the enrichment of these lipids with linoleic acid could result from the substrate selectivity of PNPLA1.

A chemometric approach based on a full factorial design to optimize terpene acylation using natural kaolin as eco‐friendly catalyst

AbstractA statistical approach was successfully applied to optimize the acylation of l‐menthol 1 in the presence of natural kaolin as an eco‐compatible catalyst. The influence of the main variation of the operating parameters, namely solvent volume, amount of the acyl donor, temperature and the catalytic rate of kaolin, was studied. A full factorial design (FFD) was used to search for the optimum of each parameter affecting the evolution of l‐menthol 1 acylation. A quadratic polynomial regression model was applied to analyse the experimental data with a p‐confidence level &lt;.05 (95%). Statistical analysis of the data confirmed that temperature (T), acyl donor/acceptor ratio (Qa), kaolin mass (Qc) and solvent volume (V) were the significant factors affecting the l‐menthol catalytic acylation process. The determination coefficient of the adopted model was in the order of 98%. A set of optimal reaction conditions was established, and experimental tests were performed to validate the optimal conditions; the threshold of 100% was reached. Monitoring the kinetic profile of the reaction by gas chromatography (GC) showed complete conversion after 30 min of reaction. An upgrade of this developed environmentally benign process was applied to some monoterpenic alcohols, and the corresponding acetates were yielding at 45%–90%.