Acute Inhalation Toxicity Research Articles

Nicotine delivery to rats via lung alveolar region-targeted aerosol technology produces blood pharmacokinetics resembling human smoking.

Nicotine is a heavily used addictive drug acquired through smoking tobacco. Nicotine in cigarette smoke is deposited and absorbed in the lungs, which results in a rapidly peaked slowly declining arterial concentration. This pattern plays an important role in initiation of nicotine addiction. A method and device were developed for delivering nicotine to rodents with lung alveolar region-targeted aerosol technology. The dose of delivery can be controlled by the nicotine aerosol concentration and duration of exposure. Our data showed that, in the breathing zone of the nose-only exposure chamber, the aerosol droplet size distribution was within the respirable diameter range. Rats were exposed to nicotine aerosol for 2 min. The arterial blood nicotine concentration reached 43.2 ± 15.7 ng/ml (mean ± SD) within 1-4 min and declined over the next 20 min, closely resembling the magnitude and early pharmacokinetics of a human smoking a cigarette. The acute inhalation toxicity of nicotine: LC50 = 2.3mg/L was determined; it was affected by pH, suggesting that acidification decreases nicotine absorption and/or bioavailability. A noninvasive method and toolkit were developed for delivering nicotine to rodents that enable rapid delivery of a controllable amount of nicotine into the systemic circulation and brain-inducing dose-dependent pharmacological effects, even a lethal dose. Aerosol inhalation can produce nicotine kinetics in both arterial and venous blood resembling human smoking. This method can be applied to studies of the effects of chronic intermittent nicotine exposure, nicotine addiction, toxicology, tobacco-related diseases, teratogenicity, and for discovery of pharmacological therapeutics.

In vivo–in vitro comparison of acute respiratory tract toxicity using human 3D airway epithelial models and human A549 and murine 3T3 monolayer cell systems

The usefulness of in vitro systems to predict acute inhalation toxicity was investigated. Nineteen substances were tested in three-dimensional human airway epithelial models, EpiAirway™ and MucilAir™, and in A549 and 3T3 monolayer cell cultures. IC50 values were compared to rat four-hour LC50 values classified according to EPA and GHS hazard categories. Best results were achieved with a prediction model distinguishing toxic from non-toxic substances, with satisfactory specificities and sensitivities. Using a self-made four-level prediction model to classify substances into four in vitro hazard categories, in vivo–in vitro concordance was mediocre, but could be improved by excluding substances causing pulmonary edema and emphysema in vivo. None of the test systems was outstanding, and there was no evidence that tissue or monolayer systems using respiratory tract cells provide an added value. However, the test systems only reflected bronchiole epithelia and alveolar cells and investigated cytotoxicity. Effects occurring in other cells by other mechanisms could not be recognised. Further work should optimise test protocols and expand the set of substances tested to define applicability domains. In vivo respiratory toxicity data for in vitro comparisons should distinguish different modes of action, and their relevance for human health effects should be ensured.

A Pilot Study on the Refinement of Acute Inhalation Toxicity Studies: The Isolated Perfused Rat Lung as a Screening Tool for Surface-active Substances

New surface-active agents in waterproofing sprays are frequently tested for acute inhalation toxicity in vivo according to OECD Test Guideline 403. In order to refine and reduce the number of acute inhalation tests performed, we propose a screening test that uses isolated lungs. The test consists of the exposure of isolated, ventilated and perfused rat lungs, to aerosolised formulations of waterproofing agents (mass median aerodynamic diameter = 1μm), and on-line monitoring of respiratory parameters and gross pathology analysis. A pilot evaluation of the isolated perfused rat lung model for use in a screening test was carried out by blind testing 12 surface-active substances. The results obtained compared well with data available from in vivo acute inhalation studies. Substances that triggered harmful effects, such as impaired lung compliance and atelectasis of the isolated perfused lung, were also found to cause changes in respiratory parameters, some of which would be severe enough to lead to death in in vivo tests with rats. The changes in respiratory parameters suggest that the mode-of-action is associated with impairment of the surfactant layer. Therefore, pre-testing in the isolated perfused rat lung allows the identification of surface-active substances with the potential for causing acute inhalation toxicity.

Evaluation of oleoresin capsicum of Capsicum frutescenes var. Nagahari containing various percentages of capsaicinoids following inhalation as an active ingredient for tear gas munitions

Comparative efficacy as peripheral sensory irritant, oral and inhalation exposure studies were carried out on oleoresin capsicum (OC) of Capsicum frutescence var. Nagahari containing various percentages of capsaicinoids and two synthetic isomers of capsaicin in Swiss albino male mouse model to come up with a suitable active ingredient from natural source for tear gas munitions. The compounds screened were OC having varying percentages of capsaicinoids (20, 40 and 80%, respectively) and synthetic isomers (E and Z) of capsaicin (8-methyl-N-vanillyl-6-nonenamide). Mice were exposed to pyrotechnically generated smoke of the compounds in an all glass static exposure chamber for 15 min to determine acute inhalation toxicity (LC50) and quantitative sensory irritation potential (RD50). Acute oral median lethal dose (LD50) was also evaluated. Safety index of tear gas (SITG), a ratio of lethal concentration 50% (LC50) and the concentration which depresses respiration by 50% (RD50) due to peripheral sensory irritation is also proposed. The compound having highest SITG is considered as the most suitable to be used for tear gas munitions. The study revealed that oleoresin capsicum containing 40% capsaicinoids had the highest SITG among the compounds studied. The oral dosage versus mortality pattern of some compoundsdid not follow a true dose–response curve (DRC); however, following inhalation, all the compounds followed DRC. It was concluded that oleoresin capsicum (40% capsaicinoids) may be considered as the most suitable and environmental friendly compound from natural source to be used as an active ingredient for tear gas munitions.

Estimation of the Acute Inhalation Hazards of Chemicals Based on Route-to-route and Local Endpoint Extrapolation: Experience from Bulk Maritime Transport

Data on acute lethal inhalation toxicity from animal studies are commonly required for assessing the hazards to human health of volatile, gaseous and dusty chemicals or their mixtures. The International Maritime Organisation (IMO) made the provision of acute inhalation toxicity data a mandatory requirement for the carriage of bulk liquid chemicals transported by sea in tank ships, thereby creating the need for inhalation data on many hundreds of chemicals in bulk maritime transport. Taking note of previously published proposals for estimating acute inhalation toxicity hazards for chemicals, and the paucity of measured experimental data, an extrapolation method has been developed by the Group of Experts on the Scientific Aspects of Marine Environmental Protection (GESAMP) to partly fulfil this need. This method should be seen as a pragmatic approach to the challenge of missing measured experimental test data, with the added benefit of reducing tests in experimental animals. The method is based on a route-to-route (i.e. between-route) extrapolation of information on acute oral and/or dermal toxicity, in combination with data on the potential for irritation and/or corrosion to skin and eyes. The validation of this method was based on the individual evaluation of inhalation toxicity studies for 330 chemicals, including mixtures and many important chemical groups, for which the IMO holds public and industry-confidential data. The authors contend that this extrapolation method offers a reliable basis for hazard evaluation in the context of bulk maritime transport, and the 'GESAMP inhalation toxicity extrapolation method' has become part of the IMO regulatory system for the carriage of bulk liquids (i.e. noxious liquid substances) on board tank ships.

Scientific Opinion on the safety and efficacy of pantothenic acid (calcium D‐pantothenate and D‐panthenol) as a feed additive for all animal species based on a dossier submitted by Lohmann Animal Health

The use of calcium D-pantothenate in feed and of D-panthenol in water for drinking is safe for all animal species and categories. The use of calcium D-pantothenate and D-panthenol as nutritional additives does not give rise to concern for consumers. Since no data on acute inhalation toxicity has been provided, inhalation of dust is considered as potentially hazardous. D-panthenol being currently only available in liquid preparations, the FEEDAP Panel does not anticipate any inhalation hazard. Because of the lack of data, calcium D-pantothenate is considered as a skin and eye irritant and a skin sensitiser. D-Panthenol is regarded as a skin and eye irritant in rabbits, and allergic rashes in humans have been reported following its topical use. A risk for the environment resulting from the use of pantothenic acid in animal nutrition is not foreseen. Due to its established nutritional role in domestic animals, calcium D-pantothenate is regarded as an effective source of pantothenic acid. D-Panthenol is considered a pro-vitamin essentially bioequivalent to pantothenic acid.

Acute inhalation toxicity of cerium oxide nanoparticles in rats

The aim of the present study was to assess the acute toxic potential of cerium oxide nanoparticles (CeO2 NPs) in rats when exposed through the head and nose inhalation route. The rats were exposed to CeO2 NPs and the resultant effects if any, to cause cytotoxicity, oxidative stress and inflammation in the lungs were evaluated on a 24h, 48h and 14 day post exposure period. Our results showed a significant decrease in the cell viability, with the increase of lactate dehydogenase, total protein and alkaline phosphatase levels in the bronchoalveolar lavage fluid (BALF) of the exposed rats. Total leukocyte count and the percentage of neutrophils in BALF were elevated within 24h of post exposure. The concentrations of pro-inflammatory cytokines (IL-1β, TNF-α, and IL-6) were significantly increased in the BALF and in the blood throughout the observation period. The level of malondialdehyde was elevated with the decreased levels of intracellular reduced glutathione (GSH) in the lung after exposure. The alveolar macrophages (AMs) and neutrophils overloaded with phagocytosed CeO2 NPs were observed along with non-phagocytosed free CeO2 NPs that were deposited over the epithelial surfaces of the bronchi, bronchiole and alveolar regions of lungs within 24h of post exposure and were consistent throughout the observation period. A well distributed, multifocal pulmonary microgranulomas due to impairment of clearance mechanism leading to biopersistence of CeO2 NPs for an extended period of time were observed at the end of the 14 day post exposure period. These results suggest that acute exposure of CeO2 NPs through inhalation route may induce cytotoxicity via oxidative stress and may lead to a chronic inflammatory response.

Acute and Subchronic Inhalation Toxicity of n-Octane in Rats

ObjectivesWe have investigated the toxic effects of the inhalation of subchronic and acute levels of n-octane.MethodsThe rats were exposed to n-octane of 0, 2.34, 11.68 and 23.36 mg/L (n = 5 rats/group/gender) in an acute inhalation test (Organization for Economic Co-operation and Development (OECD) TG 403), or to 0, 0.93, 2.62 and 7.48 mg/L (n = 10 rats/group/gender) for a subchronic inhalation test (OECE TG 413), to establish a national chemical management system consistent with the Globally Harmonized Classification System (GHS).ResultsAcutely-exposed rats became lethargic but recovered following discontinuation of inhalation. Other clinical symptoms such as change of body weight and autopsy finds were absent. The LC50 for the acute inhalation toxicity of n-octane was determined to exceed 23.36 mg/L and the GHS category was 'not grouping'. Subchronically-treated rats displayed no significant clinical and histopathological differences from untreated controls; also, target organs were affected hematologically, biochemically and pathologically. Therefore, the no observable adverse effect level was indicated as exceeding 7.48 mg/L and the GHS category was 'not grouping' for the specific target organ toxicity upon repeated exposure.ConclusionHowever, n-octane exposure should be controlled to be below the American Conference of Industrial Hygienists recommendation (300 ppm) to prevent inhalation-related adverse health effects of workers.

Acute inhalation toxicity of silver nanoparticles

The acute inhalation toxicity of silver nanoparticles was studied in Sprague-Dawley rats. Seven-week-old rats, weighing approximately 218 g (males) and 153 g (females), were divided into four groups (five rats in each group): fresh-air control, low-dose (0.94 × 10(6) particle/cm(3), 76 µg/m(3)), middle-dose (1.64 × 10(6) particle/ cm(3), 135 µg/m( 3)), and high-dose (3.08 × 10(6) particle/cm(3), 750 µg/m(3)). The animals were then exposed to silver nanoparticles (average diameter 18-20 nm) for 4 hours in a whole-body inhalation chamber. The experiment was conducted following Organization Economic Cooperation and Development (OECD) test guideline 403 with the application of good laboratory practice (GLP). In addition to mortality and clinical observations, the body weights, food consumption, and pulmonary function tests were recorded weekly. At the end of the study, the rats were subjected to a full necropsy, and the organ weights measured. The lung function was also measured twice per week after the initial 4-hour exposure. No significant body weight changes or clinical changes were found during the 2-week observation period. The lung function tests also indicated no significant difference between the fresh air control and the exposed groups. Thus, LC50 silver nanoparticles are suggested for higher than 3.1 × 10(6) particles/cm(3) (750 µg/m(3)).

A new sighting study for the fixed concentration procedure to allow for gender differences

The fixed concentration procedure (FCP) has been proposed as an alternative to the median lethal concentration (LC50) test (organisation for economic co-operation and development (OECD) test guideline [TG] 403) for the assessment of acute inhalation toxicity. The FCP tests animals of a single gender (usually females) at a number of fixed concentration levels in a sequential fashion. It begins with a sighting study that precedes the main FCP study and is used to determine the main study starting concentration. In this paper, we propose a modification to the sighting study and suggest that it should be conducted using both male and female animals, rather than just animals of a single gender. Statistical analysis demonstrates that, when females are more sensitive, the new procedure is likely to give the same classification as the original FCP, whereas, if males are more sensitive, the new procedure is much less likely to lead to incorrect classification into a less toxic category. If there is no difference in the LC50 for females and males, the new procedure is slightly more likely to classify into a more stringent class than the original FCP. Overall, these results show that the revised sighting study ensures gender differences in sensitivity do not significantly impact on the performance of the FCP, supporting its use as an alternative test method for assessing acute inhalation toxicity.

A statistical evaluation of the effects of gender differences in assessment of acute inhalation toxicity

Acute inhalation toxicity of chemicals has conventionally been assessed by the median lethal concentration (LC50) test (organisation for economic co-operation and development (OECD) TG 403). Two new methods, the recently adopted acute toxic class method (ATC; OECD TG 436) and a proposed fixed concentration procedure (FCP), have recently been considered, but statistical evaluations of these methods did not investigate the influence of differential sensitivity between male and female rats on the outcomes. This paper presents an analysis of data from the assessment of acute inhalation toxicity for 56 substances. Statistically significant differences between the LC50 for males and females were found for 16 substances, with greater than 10-fold differences in the LC50 for two substances. The paper also reports a statistical evaluation of the three test methods in the presence of unanticipated gender differences. With TG 403, a gender difference leads to a slightly greater chance of under-classification. This is also the case for the ATC method, but more pronounced than for TG 403, with misclassification of nearly all substances from Globally Harmonised System (GHS) class 3 into class 4. As the FCP uses females only, if females are more sensitive, the classification is unchanged. If males are more sensitive, the procedure may lead to under-classification. Additional research on modification of the FCP is thus proposed.

Uptake Kinetics, Species Differences, and the Determination of Equivalent Combinations of Air Concentration and Exposure Duration for Assessment of Acute Inhalation Toxicity

ABSTRACT For acute inhalation toxicity assessment, I develop a conceptual framework for expressing combinations of intensity (air concentration) and duration that produce equivalent toxicity by examining how the shape of the body-burden uptake curve during a bout of inhalation interacts with various pharmacodynamic measures of the critical body burden needed to produce toxicity. If toxicity depends on attaining a critical tissue concentration, three existing empirical approaches—Haber's Law, the ten Berge equation, and pure air-concentration-dependence—are but local approximations to different parts of an overarching mathematical relationship. The compound-specific half-life of elimination determines the range of durations for which each applies: durations of one half-life or shorter follow Haber's Law, exposures of 4 or more half-lives follow pure air-concentration-dependence, and intermediate durations can be approximated by the ten Berge equation. Better animal-to-human extrapolation is achieved if exposure durations are expressed as number of species-specific half-lives. I consider several alternative pharmacodynamic criteria, such as the dependence of toxicity on time spent above a critical tissue concentration, or on the area under the tissue concentration curve, on the tissue concentration of a toxic metabolite, or on the imbalance of damage and repair processes.

Efficacy and safety of catnip (Nepeta cataria) as a novel filth fly repellent*

Catnip (Nepeta cataria) is known for its pseudo-narcotic effects on cats. Recently, it has been reported as an effective mosquito repellent against several Aedes and Culex species, both topically and spatially. Our laboratory bioassays showed that catnip essential oil (at a dosage of 20 mg) resulted in average repellency rates of 96% against stable flies, Stomoxys calcitrans (L.) and 79% against houseflies, Musca domestica (L.), respectively. This finding suggested that the application of repellent could be used as part of filth fly management. Further evaluations of catnip oil toxicity were conducted to provide a broad-spectrum safety profile of catnip oil use as a potential biting and nuisance insect repellent in urban settings. Acute oral, dermal, inhalation, primary dermal and eye irritation toxicity tests were performed. The acute oral LD(50) of catnip oil was found to be 3160 mg/kg body weight (BW) and 2710 mg/kg BW in female and male rats, respectively. The acute dermal LD50 was > 5000 mg/kg BW. The acute inhalation LD50 was observed to be > 10,000 mg/m3. Primary skin irritation tested on New Zealand white rabbits showed that catnip oil is a moderate irritant. Catnip oil was classified as practically non-irritating to the eye. In comparison with other U.S. Environmental Protection Agency-approved mosquito repellents (DEET, picaridin and p-menthane-3,8-diol), catnip oil can be considered as a relatively safe repellent, which may cause minor skin irritation.

Acute Oral and Inhalation Toxicities in Rats With Cadmium Telluride

Cadmium telluride (CdTe) thin film photovoltaic has become one of the leading technologies in the solar renewable energy market. Little is known about CdTe's toxicological profile and regulatory agencies usually apply cadmium (Cd) criteria as a best approximation. However, CdTe may have different toxicological properties. The goal of this study is to determine the median lethal concentration/dose of CdTe and to compare these values with those of Cd. Using a rat model, the method followed conforms to that described in the Organisation for Economic Co-operation and Development (OECD) guidelines and in the US Environmental Protection Agency (EPA) Health Effects Test Guidelines. The median lethal concentration of CdTe was established at 2.71 mg/L, showing a very low variability between genders. The median lethal dose was determined to be greater than 2000 mg/kg. These results clearly show that CdTe is less toxic than Cd.

Development of a Botulinum Neurotoxin animal inhalation model and evaluation of small molecule therapeutics for medical countermeasure

We have recently developed several small molecule inhibitors of Botulinum Neurotoxin (BoNT) using a fragment-based approach guided by structural data and computer-aided lead optimization. In vitro assay and cell-based assays showed that these are the most potent inhibitors described against BoNT to date. We are now evaluating the safety and efficacy of the lead inhibitors in a small animal model of BoNT inhalational exposure. Inhalation is the most likely form of delivery of BoNT if it is used as a biological weapon. Emerging data from other groups reveal severe impairment of several respiratory functional parameters following BoNT/A exposure and lack of protection by the pentavalent toxoid against pulmonary injury. We are adopting our microinstillation technology, which involves aerosolizing the toxin in the trachea using a microcatheter to develop a BoNT inhalation exposure model. The simplicity of the procedure and its requirement of only microliters of a toxin to generate a meaningful and reliable dose–response suggest that it may be a suitable method for acute inhalation toxicity evaluation of BoNT aerosol. Post-exposure respiratory functional analysis by plethysmography may identify sensitive non-invasive parameters for rapid and early diagnosis of BoNT exposure. Since the airway and lung is the primary target for inhaled BoNT and the lung pathology persists, development of a small animal inhalation model and evaluation of potent small molecule BoNT inhibitors is important to develop therapeutics to protect against both the pulmonary pathology as well as systemic toxicity in the event of an aerosol release.

Pulmonary Irritation After Inhalation Exposure to Benzalkonium Chloride in Rats

Benzalkonium chloride (BAC) is a quaternary ammonium compound (QAC) with a C8 to C18 chain length of alkyl groups. Since BAC exerts toxic effects on microorganisms, it has been used as an effective germicide and preservative, mostly in cosmetic industry and medicine. However, the toxic potential of BAC may be hazardous to humans, due to the common use of preparations containing BAC as a preservative. To assess the possible toxic effects of BAC, two-stage experiments were performed on female Wistar rats. At first, LC50 after a single exposure to BAC aerosol was determined. Then, the animals were exposed to BAC aerosol at 30 mg/m3 for 6 h, and for 3 days (6 h/day). The controls were unexposed rats. Directly after BAC exposure and 18 h afterwards, BALF concentrations were measured of total protein, Clara cell protein, matrix metalloproteinase-9 (MMP-9), hyaluronic acid (HA), immunoglobulin E (IgE) and cytokines (TF-alpha, IL-6 and MIP-20), lactate dehydrogenase (LDH) and GSH-S-transferase (GST). The LC50 value for exposed rats was ca. 53 mg BAC in m3 air for 4 h. All the rats survived single and repeated inhalation exposure to 30 mg/m3 BAC. After single and repeated exposure, lung weight, total protein, HA and LDH activity in BALF of exposed rats were higher than in controls while CC16 levels were decreased. A significantly higher BALF concentration of IL-6 and IgE was noted in animals exposed to single and repeated doses. BALF concentrations of MMP-9, TNF-alpha, and MIP-2 in exposed rats were similar to those in control animals. BAC may be classified to class I acute inhalation toxicity. It showed a strong inflammatory and irritant activity on the lungs after 6h inhalation and stimulated dynamic patterns of IL-6 and IgE production and protein infiltration from blood vessels to BALF. Continued exposure resulted in cellular destruction, a statistically significant increase in LDH activity and a continuous decrease in CC16 concentration in BALF.

Assessment of Early Acute Lung Injury in Rats Exposed to Aerosols of Consumer Products: Attempt to Disentangle the “Magic Nano” Conundrum

In Germany in 2006 a series of rapidly developing and sometimes severe cases of pulmonary health impairment were observed after normal use of the “Magic Nano Glass & Ceramic” spray and “Magic Nano Bath” spray. In contrast, the previously marketed “Magic Nano” pump spray product (handheld trigger device without propellants) was unobtrusive. Analysis of particles discharged from these products did not reveal stable (solid) nano-sized particles. The precipitous increase of pulmonary health impairment in humans caused by “Magic Nano Sprays” triggered a comparative assessment of the acute inhalation toxicity of “Magic Nano Glass & Ceramic” spray, “Magic Nano Bath” spray, and “Magic Nano” pump spray in rats. The first two test specimens were examined as spray-can aerosols using an intermittent generation principle, whereas the undiluted liquid content of the pump spray was continuously aerosolized. Groups of Wistar rats were nose-only exposed for 4 h. However, due to mortality occurring already during exposure following exposure to Glass & Ceramic spray, the exposure duration was reduced to ∼ 2 h in some groups. In addition to endpoints called for by contemporary testing guidelines, respiratory tract injury was also probed by respiratory function measurements during exposure supplemented by analyses in bronchoalveolar lavage (BAL) fluid on the first postexposure day, including lung histopathology in rats exposed to Glass & Ceramic spray. The Glass & Ceramic spray caused mortality at 2269 mg/m3 and above, the pump spray was in the beginning lethal range at 81222 mg/m3, while the bath spray was tolerated without mortality up to the maximum tested nominal concentrations of 28100 mg/m3. The time-adjusted 4-h LC50 of Glass & Ceramic spray was 5098 mg/m3. The analysis of respiratory patterns revealed changes indicative of both upper and lower respiratory tract sensory irritation. In addition to clinical signs suggestive of marked lung irritation, especially in the rats exposed to the Glass & Ceramic spray, histopathology revealed lung inflammation, hemorrhages, edema, and focal septal thickening. Lung weights and BAL endpoints (lactate dehydrogenase [LDH], protein, γ -glutamyltransaminase, and neutrophilic granulocytes) were markedly increased. In summary, this comparative study demonstrates that the conventional OECD 403 protocol is suitable to comparatively assess the potential and potency of these types of consumer products in their end-use configuration. Measurements in BAL were most suitable for the identification of acute lung injury. By contrast, lung function measurements during exposure did not demonstrate any conclusive association with lung injury. It does not appear that the particle size per se is a key determinant in the toxicity of “Magic Nano Glass & Ceramic” spray (approximately 100% mortality occurred at a MMAD of ∼ 7 μ m; GSD ≈ 3). This might suggest that more volatile substances or substances contained in the test articles that co-evaporate with solvents or water may be causative for the findings observed. Hence, the findings of this study support the notion that the assessment of the acute inhalation toxicity of complex end-use products is methodologically challenging and cannot be readily anticipated based on compositional or physical (particle size) data. Accordingly, in the absence of predictive and validated in vitro assays, in vivo inhalation testing of potentially toxic commercialized spray products appears to be indispensable for consumer safety. In order to prevent indiscriminant testing of such products in bioassays, the development of standardized in vitro alternatives should be considered with high priority.

Pulmonary irritation after inhalation exposure to benzalkonium chloride in rats

Background Benzalkonium chloride (BAC) is a quaternary ammonium compound (QAC) with a C8 to C18 chain length of alkyl groups. Since BAC exerts toxic effects on microorganisms, it has been used as an effective germicide and preservative, mostly in cosmetic industry and medicine. However, the toxic potential of BAC may be hazardous to humans, due to the common use of preparations containing BAC as a preservative. Material and methods To assess the possible toxic effects of BAC, two-stage experiments were performed on female Wistar rats. At first, LC50 after a single exposure to BAC aerosol was determined. Then, the animals were exposed to BAC aerosol at 30 mg/m3 for 6 h, and for 3 days (6 h/day). The controls were unexposed rats. Directly after BAC exposure and 18 h afterwards, BALF concentrations were measured of total protein, Clara cell protein, matrix metalloproteinase-9 (MMP-9), hyaluronic acid (HA), immunoglobulin E (IgE) and cytokines (TF-alpha, IL-6 and MIP-20), lactate dehydrogenase (LDH) and GSH-S-transferase (GST). Results The LC50 value for exposed rats was ca. 53 mg BAC in m3 air for 4 h. All the rats survived single and repeated inhalation exposure to 30 mg/m3 BAC. After single and repeated exposure, lung weight, total protein, HA and LDH activity in BALF of exposed rats were higher than in controls while CC16 levels were decreased. A significantly higher BALF concentration of IL-6 and IgE was noted in animals exposed to single and repeated doses. BALF concentrations of MMP-9, TNF-alpha, and MIP-2 in exposed rats were similar to those in control animals. Conclusion BAC may be classified to class I acute inhalation toxicity. It showed a strong inflammatory and irritant activity on the lungs after 6h inhalation and stimulated dynamic patterns of IL-6 and IgE production and protein infiltration from blood vessels to BALF. Continued exposure resulted in cellular destruction, a statistically significant increase in LDH activity and a continuous decrease in CC16 concentration in BALF.

Evaluation of acute inhalation toxicity for chemicals with limited toxicity information

A large reference database consisting of acute inhalation no-observed-adverse-effect levels (NOAELs) and acute lethality data for 97 chemicals was compiled to investigate two methods to derive health-protective concentrations for chemicals with limited toxicity data for the evaluation of one-hour intermittent inhalation exposure. One method is to determine threshold of concern (TOC) concentrations for acute toxicity potency categories and the other is to determine NOAEL-to-LC 50 ratios. In the TOC approach, 97 chemicals were classified based on the Globally Harmonized System of Classification and Labeling of Chemicals proposed by the United Nations into different acute toxicity categories (from most toxic to least toxic): Category 1, Category 2, Category 3, Category 4, and Category 5. The tenth percentile of the cumulative percentage distribution of NOAELs in each category was determined and divided by an uncertainty factor of 100 to derive the following health-protective TOC concentrations: 4 μg/m 3 for chemicals classified in Category 1; 20 μg/m 3 for Category 2; 125 μg/m 3 for both Categories 3 and 4; and 1000 μg/m 3 for Category 5. For the NOAEL-to-LC 50 ratio approach, 55 chemicals with NOAEL exposure durations ⩽24 hour were used to calculate NOAEL-to-LC 50 ratios. The tenth percentile of the cumulative percentage distribution of the ratios was calculated and divided by an uncertainty factor of 100 to produce a composite factor equal to 8.3 × 10 −5. For a chemical with limited toxicity information, this composite factor is multiplied by a 4-hour LC 50 value or other appropriate acute lethality data. Both approaches can be used to produce an estimate of a conservative threshold air concentration below which no appreciable risk to the general population would be expected to occur after a one-hour intermittent exposure.

Broad-spectrum microbicidal activity, toxicologic assessment, and materials compatibility of a new generation of accelerated hydrogen peroxide-based environmental surface disinfectant

BackgroundConcerns on human and environmental safety and label claims of many microbicides point to the need for safer, faster acting, and broad-spectrum substitutes. ACCEL TB, a 0.5% accelerated H2O2 (AHP)-based disinfectant described here, is a potential candidate.MethodsACCEL TB was tested for its broad-spectrum microbicidal activity, safety and materials compatibility using internationally accepted protocols. Activity against bacteria (Staphylococcus aureus, Escherichia coli, Acinetobacter baumannii, Pseudomonas aeruginosa, vancomycin-resistant Enterococcus faecalis, methicillin-resistant Staphylococcus aureus, and Salmonella choleraesuis) was tested with the AOAC use-dilution method and the first tier of a quantitative carrier test (QCT-1). Mycobactericidal activity was tested against Mycobacterium bovis and Mycobacterium terrae using a quantitative suspension test (QST) and QCT-1, respectively. Fungicidal activity (Trichophyton mentagrophytes) was determined with the AOAC test and QCT-1. Activity against several enveloped and nonenveloped viruses was evaluated using the American Society for Testing and Materials (ASTM) method No. E-1053. Sanitizing action was tested against 7 types of vegetative bacteria with method No. DIS/TSS-10. All microbicidal tests contained an added soil load; in all AOAC tests, it was 5% fetal bovine serum, and, in QCT-1, a mixture of 3 types of proteins in phosphate buffer was used instead. The methods to test for acute oral, dermal, inhalation toxicities, and dermal and eye irritation as well as skin sensitization complied with the requirements of the Organization for Economic Cooperation and Development and the US Environmental Protection Agency (OPPTS 870). Standard methods were also used to test compatibility with metals and plastics.ResultsAt 20°C, the full-strength product was bactericidal and virucidal in 1 minute and mycobactericidal and fungicidal in 5 minutes. It was nonirritating to skin and eyes. The acute oral LD50 (lethal dose 50%) was >5000 mg/kg. It was compatible with 12 types of plastic and 3 out of 4 metals.ConclusionThe tested formulation showed a high safety and materials compatibility profile in addition to being a fast acting, intermediate-level disinfectant.