Activity In Epoxidation Research Articles

One-step condensation synthesis of di-tertiary ammonium salt protic ionic liquid for efficiently catalytic CO2 cycloaddition reaction under cocatalyst- and solvent-free conditions

A novel protic ionic liquid di-tertiary ammonium bromide ionic liquid (DTAB-IL) was synthesized by one-step condensation at 0 ℃ with 85 % yield. DTAB-IL also exhibited effective catalytic activity for CO2 cycloaddition without cocatalyst and solvent. The catalytic reaction conditions were optimized to 90 ℃, 4 h, 1 MPa, and the yield of propylene carbonate was obtained 96 % with high selectivity 99 %. Under the optimal conditions, DTAB-IL catalyst exhibited good recyclability and universality to various epoxides. Furthermore, temperature influence and kinetic investigation for propylene carbonate synthesis were studied. The activation energy for DTAB-IL catalyzing CO2 cycloaddition reaction was 43.93 kJ/mol, and the reaction was found to follow first-order for propylene oxide. Efficient cycloaddition reaction of CO2 and epoxide was attributed to the activation of epoxide and CO2 by di-tertiary ammonium and epoxide ring-opening by bromide anion in DTAB-IL.

The embedding of 1,8-diazabicyclo[5.4.0]undec-7-ene into hyper-crosslinked ionic polymers for efficient CO2 conversion at atmospheric pressure

The preparation of cyclic carbonates via CO2 cycloaddition reaction was crucial for the lithium industry. Herein, a series of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) based hyper-crosslinked ionic polymers with different ionic site densities were prepared by simultaneously Friedel-Crafts alkylation and quaternization reactions. The obtained P[DBU]DCX(1:1) with a high ionic site density (1.45 mmol g−1), prepared by the equimolar ratio of 1,8-diazabicyclo[5.4.0]undec-7-ene and α,α′-dichloro-p-xylene, exhibiting excellent catalytic performance with a chloropropylene carbonate (CPC) yield of 98.8 % and selectivity of 99.3 % at atmospheric pressure. Meanwhile, the conversion capacity was comparable with other catalysts. Moreover, the CO2 cycloaddition reaction over P[DBU]DCX(1:1) catalyst followed pseudo-first-order kinetics, and the activation energy (Ea) was obtained to be 28.7 kJ/mol by performing kinetic experiments at different temperatures. In addition, it also had a good reusability and universality for different epoxides. The synergistic effects of abundant quaternary nitrogen cations derived from DBU and chlorine anions on the activation of CO2 and epoxide were explored based on density functional theory calculation. This study offers a new approach for the design and application of hyper-crosslinked ionic polymers for efficient CO2 conversion at atmospheric pressure.

Synergistic catalysis of dual-sites promoted cycloaddition of CO2 with epoxides

This study explores the catalytic efficacy of fluorine-modified 1 wt% copper oxide on MCM-41 (F-1Cu/MCM-41) in carbon dioxide cycloaddition reactions. It delves into reaction mechanisms, active sites, and the practical applicability of the catalyst. Comprehensive examination through in situ diffuse reflectance infrared Fourier transform spectroscopy and other analytical methods substantiated the role of halogen-modified mono-dispersed copper species in carbon dioxide activation and silicon hydroxide sites in epoxide activation, while underscoring the role of Lewis bases and Brønsted acids. Kinetic studies and density functional theory calculations pinpointed carbon dioxide activation as the pivotal step. Furthermore, the catalyst exhibited robust stability and efficiency in continuous flow experiments, sustaining a 99% selectivity towards cyclic carbonate over 150 h. An eco-friendly evaluation confirmed the sustainability of the process, emphasizing its minimal environmental footprint and high efficiency. These results establish fluorine-modified 1 wt% copper oxide on MCM-41 as a formidable candidate for industrial-scale cyclic carbonate production, due to its promising performance and sustainability.

Upcycling sugar beet waste into sustainable organo-nanocatalysis for carbon dioxide fixation and cyclic carbonate synthesis: a research design study

Environmental pollution is a major global issue due to the increase of various pollutants all over the world. Enhancing pollutant remediation strategies for environmental sustainability necessitates increasing the efficiency of conventional methods or introducing innovative approaches. Nanotechnology, particularly carbon-based nanomaterials, offers substantial promise due to their high surface area and absorption potential. Concurrently, organocatalysts have emerged as sustainable and versatile alternatives to traditional metal-based catalysts in modern chemical research. This study highlights the synthesis and application of organo-nanocatalysts derived from biomass, specifically a spherical carbon nanocatalyst synthesized from sugar beet pulp. This novel green catalyst, characterized by high selectivity and efficiency, successfully converts epoxides and CO2 into valuable cyclic carbonates under solvent-free conditions. The hydroxyl groups on the Sugar Beet-derived Carbon NanoSphere (SCNS) surface act as Bronsted acid sites, facilitating epoxide activation via hydrogen bonding. The integration of carbon-based nanomaterials and organocatalysis represents a promising, sustainable solution for pollutant remediation and green chemistry advancements.Graphical

Iron(III) Complexes with Pyridine Group Coordination and Dissociation Reversible Equilibrium: Cooperative Activation of CO2 and Epoxides into Cyclic Carbonates.

Herein, a series of [ONSN]-type iron(III) complexes were synthesized. A binary catalytic system in combination with iron complexes and tetrabutylammonium bromide (TBAB) exhibited high activity for the synthesis of cyclic carbonates from CO2 (1 atm) and terminal epoxides at room temperature. Additionally, single-component iron complexes without using additional TBAB as nucleophiles also showed high activity for the cycloaddition of CO2 and terminal epoxides under 80 °C and 0.5 MPa of CO2. This study demonstrates that single-component iron catalysts provide a competitive alternative to binary catalytic systems for the synthesis of cyclic carbonates from CO2 and epoxides. Mechanistic studies on a single-component iron catalytic system suggest that the temperature serves as a role of responsive switch for controlling the coordination and dissociation of pyridine bearing iron catalysts detected using in situ infrared spectroscopy, and uncoordinated pyridine activates CO2 to form carbamate. Studies of electrospray ionization high-resolution mass spectrometry reveal that an iron center was used as a Lewis acidic site, free halogen anions from the iron center were used as a nucleophilic site, and coordinated pyridine was released from iron complexes to activate CO2.

One‐Pot Cascade Reaction from Epoxide to Carboxylic Acids Using Bifunctional Fe‐ZSM‐5

AbstractThe quest for sustainable synthesis of carboxylic acids has led to the exploration of innovative routes and catalysts for the oxidative cleavage of carbon−carbon double bonds, prevalent in bio‐derived molecules. This process involves multiple steps including epoxidation, hydrolysis and vicinal diol cleavage, often catalysed by unsustainable homogeneous or noble‐metal catalysts. In this study, we present the utilization of Fe‐ZSM‐5 as a versatile bifunctional catalyst capable of catalysing both hydrolysis and vicinal diol cleavage steps, utilizing propylene oxide as model compound and H2O2 as oxidizing agent. The prepared Fe‐ZSM‐5 features the zeolite intrinsic Lewis and Brønsted acidity functions, essential for the hydrolysis step, as well as high fractions of monomeric FeOx species, crucial for the subsequent vicinal diol cleavage, leading to streamlined carboxylic acids formation in a one‐pot, two‐step process. Moreover, by combining Fe‐ZSM‐5 with TS‐1, renowned for its epoxidation activity, we demonstrate the complete cascade reaction in one pot, under mild conditions, starting from ethylene. Our study expands the utility of cost‐effective zeolite‐based catalysts enriched with abundant Fe metal for the one‐pot oxidative cleavage of C=C double bonds, offering a promising pathway towards sustainable carboxylic acid synthesis.

Novel Trifunctional Intramolecular Frustrated Lewis Pair Derived From Aminoboronic Acid for Converting CO2 Into Valuable Chemicals

ABSTRACTThe conversion of CO2 into valuable chemicals remains a significant challenge for achieving environmental sustainability, primarily due to the stability of the CO2 molecule. This necessitates the development of efficient and ecofriendly catalysts. In recent years, frustrated Lewis pairs (FLPs) have shown promise for CO2 utilization. In this study, we introduce α‐aminodiboronic acid (DBA), a novel trifunctional aminoboronic acid, as an intramolecular FLP for converting CO2 into cyclic carbonate and formic acid. Using density functional theory (DFT) calculations, we explored the reaction mechanism and investigated DBA's electronic structure through molecular electrostatic potential surface (MESP) and natural bond orbital (NBO) analyses. Our results reveal that one −B (OH)2 group induces an unusual state of frustration in the molecule due to charge transfer from the nitrogen atom's lone pair to the π* orbitals, enhancing catalytic performance. The additional −B (OH)2 group serves as an anchoring site for reactive species. The epoxide activation energy is reduced by approximately 27 kcal/mol compared to the uncatalyzed reaction, and the reduction of CO2 occurs with a requirement of 26 kcal/mol. The additional −B (OH)2 plays a crucial role in the catalytic mechanism and minimizes the energies of various structures observed in the reaction path. The reaction energetics align with structural analysis observations, marking this study as the first report on single‐molecule trifunctional FLPs for transforming CO2 into valuable chemicals.

Superior and efficient performance of cost-effective MIP-202 catalyst over UiO-66-(CO2H)2 in epoxide ring opening reactions

This study explored the catalytic performance of two robust zirconium-based metal–organic frameworks (MOFs), MIP-202(Zr) and UiO-66-(CO2H)2 in the ring-opening of epoxides using alcohols and amines as nucleophilic reagents. The MOFs were characterized by techniques such as FT-IR, PXRD, FE-SEM, and EDX. Through systematic optimization of key parameters (catalyst amount, time, temperature, solvent), MIP-202(Zr) achieved 99% styrene oxide conversion in 25 min with methanol at room temperature using 5 mg catalyst. In contrast, UiO-66-(CO2H)2 required drastically harsher conditions of 120 min, 60 °C, and four times the catalyst loading to reach 98% conversion. A similar trend was observed for ring-opening with aniline –MIP-202(Zr) gave 93% conversion in one hour at room temperature, while UiO-66-(CO2H)2 needed two hours at 60 °C for 95% conversion. The superior performance of MIP-202(Zr) likely stems from cooperative Brønsted/Lewis acid sites and higher proton conductivity enabling more efficient epoxide activation. Remarkably, MIP-202(Zr) maintained consistent activity over five recycles in the ring-opening of styrene oxide by methanol and over three recycles in the ring-opening of styrene oxide by aniline. Testing various epoxide substrates and nucleophiles revealed trends in reactivity governed by electronic and steric effects. The results provide useful insights into tuning Zr-MOF-based catalysts and highlight the promise of the cost-effective and sustainable MIP-202(Zr) for diverse epoxide ring-opening reactions on an industrial scale.

Bottom-up fabrication of DABCO-based bicationic ionic liquid-grafted MIL-101(Cr): Facilitating simultaneous activation of CO2 and epoxides for cyclic carbonate synthesis

Efficient activation of substrates as an orthogonal pathway for facilitating CO2 fixation into cyclic carbonates, poses ongoing challenges for the ingenious design and development of heterogeneous cooperative catalysts. Herein, a bottom-up strategy was employed to stepwise graft chloromethyl, triethylenediamine (DABCO), and chloroethylamine onto the organic linkers, forming bicationic ionic liquid tethered to MIL-101(Cr). The introduced –NH2 and quaternary ammonium groups dangling within the micro-mesopores ensured the fast enrichment and polarization of CO2 molecules, while the inherent unsaturated Cr3+ sites bonded with the epoxides to promote the simultaneous activation. The ample Cl- counter-anions further nucleophilically attacked to proceed the ring opening process, triggering an upgradation in catalytic performance for cycloaddition. After optimized by the response surface methodology (RSM), a chloropropene carbonate (CPC) yield of 97.8 % with a selectivity of 99.3 % were attained over the developed Cl[TNH2]Cl@MIL-101(Cr) at mild conditions (104.5 °C, 1.07 MPa, 3.75 wt% of catalyst, 1.91 h) in the absence of any solvent or co-catalyst. Furthermore, Cl[TNH2]Cl@MIL-101(Cr) displayed good durability, universality, and recyclability. The synergy of multiple sites was testified by the in-situ DRIFTS spectra and DFT calculations, and thus the potential catalytic mechanism was deduced. The implement of this work could shed some lights on the rational assembling of robust IL@MOFs nanocomposites and offered novel avenues for the fabrication of high-efficiency catalysts for practical CO2 conversion.

Efficacy of tethered Pyridinium-Based ionic liquid immobilized on Zn-MOF-NH2 for effectively converting CO2 into cyclic carbonates under Co-Catalyst-free and solvent-free conditions

A new bifunctional heterogeneous catalyst system was developed by immobilization of pyridinium-based ionic liquid on Zn-MOF-NH2 to produce an IL-supported Zn-MOF-NH2 catalyst. The dual-functional one-component system, including both Lewis acid sites and IL functional sites, showed high catalytic activity for the CO2-epoxide cycloaddition reactions under mild solvent-free conditions. Different techniques such as FE-SEM, EDX, FT-IR, XRD, and BET were applied to characterize of the as-prepared catalyst. This efficient low-leaching catalyst system is separated by centrifugation and can be reused successfully for four successive cycles without altering the catalytic activity in CO2 epoxidation to cyclic carbonates. Due to the wide variety seen in both metal–organic frameworks (MOFs) and ionic liquids (ILs), we believe that this research represents a significant step forward in the potential applications of synthetic modification methods within MOFs.

Highly efficient aerobic epoxidation of styrene using mesoporous Co-Ni catalysts

This work reports the synthesis and characterization of mesoporous cobalt-nickel mixed metal oxide catalysts with varying Co:Ni ratios using an inverse micelle template self-assembly method. Their structural and morphological properties and catalytic performance in styrene epoxidation were evaluated. Among them, the 73CoNi-250 catalyst (Co: Ni70:30 mol/mol%, calcined 250°C) exhibited a unique flower-like morphology and the highest surface area, which XPS analysis linked to a higher concentration of oxygen vacancies. Notably,73CoNi-250 demonstrated exceptional catalytic activity for styrene epoxidation, achieving near-complete styrene conversion (>99 %) and high selectivity (94 %) for styrene epoxide under mild reaction conditions without the need for oxidants such as peroxides. Furthermore, the catalyst exhibited excellent reusability (≥ 4 cycles) without significant activity loss or changes in mesoporosity. Kinetic studies revealed a first-order reaction profile and a significantly enhanced rate constant compared to the best-reported values (fivefold) in the literature, further underlining the catalyst's efficiency, and emphasizing the environmentally friendly approaches in chemical synthesis.

New mixed ligand oxido-vanadium(V) complexes with O,O-donor and diimine ligands: Synthesis, crystal structure and catalytic activity in eco-friendly oxidation of olefins and phenol

The facile synthesis and structural characterization of a set of three new oxidovanadium(V) complexes of general formula [VO2(L)(diimine)], where L is ethyl-maltol(emal) (1), deferiprone(def) (2) or, maltol(mal) (3), and diimine is 5,6-dimethyl-1,10-phenanthroline(5,6-DMP) are described. The neutral complexes 1–3 have been comprehensively characterized by employing various analytical and spectroscopic techniques including single crystal X-ray diffraction analysis. The coordination geometry around the V(V) in each of the complexes was indicated by XRD-analysis to be distorted octahedral with equatorial plane being occupied by the deprotonated O,O-donor ligands. The complexes 1–3 could be successfully implemented in organic oxidations viz., hydroxylation of phenol (PH) and olefin epoxidation under environmentally clean organic-solvent-free conditions with aqueous H2O2 as oxidant. Phenol was selectively converted into dihydroxybenzene (DHB) products, catechol (CT) and hydroquinone (HQ) (HQ/CT=1.3:1) with aqueous H2O2 as oxidant at room temperature, with a TON value of 266. Moreover, the catalysts showed impressive activity in epoxidation of styrene and a range of cyclic olefins such as cyclohexene, cyclooctene, and norbornene in absence of organic solvent, to provide high conversion (up to 100 %) with excellent epoxide selectivity and good TON values. The catalysts are stable and afford recyclability for multiple cycles of epoxidation with virtually unaltered catalytic activity.

Functionally enhanced polyether-bridged amidopyridinium dicationic ionic liquids for highly efficient and sustainable fixation of CO2 to cyclic carbonates

Task-specific ionic liquids integrated with multi-active sites display promising potential for use in the cycloaddition reaction of CO2 and epoxides. Utilizing the functional enhancement strategy, we successfully synthesized a novel range of polyether-bridged amidopyridinium dicationic ionic liquids (PE-PyDILs) via efficient bisamidation and biquaternization reactions. Under relatively mild reaction conditions, PE-PyDILs can catalyze the coupling of CO2 with various epoxides to produce cyclic carbonates in quantitative yields, demonstrating an enhanced effectiveness and a longer service life compared to previous DILs. At a very low loading of 0.01 mol%, the TON value is as high as 7700. The excellent catalytic performance can be attributed to the intramolecular cooperative activation of epoxides with two amidopyridinium cations bridged by polyether, as supported by the spectroscopic analysis and kinetic studies. This mechanism led to a reduction in activation energy and improved the efficiency of the cycloaddition reaction.

Synthesis of titanium silicalite-1 supported zinc catalysts for efficient and clean epoxidation of 1-hexene and methyl oleate

To improve the catalytic epoxidation activity of conventional TS-1 zeolite under acid-free conditions, a series of TS-1-supported zinc (xZn/TS-1) catalysts were prepared and evaluated in the epoxidation of 1-hexene and methyl oleate (MO) with H2O2 oxidant. The microstructure of xZn/TS-1 was investigated using various characterization techniques, and the results showed that the introduction of Zn species was not only well dispersed on the surface of TS-1 but also did not disrupt the crystal structure of TS-1 and tetrahedral framework titanium. Furthermore, the Ti-O-Zn structure can be formed between Zn and Ti species through O-atomic coordination, which improves the vulnerability of the Ti-O bond to attack the H2O2 molecule, and ultimately facilitates the epoxidation reaction between 1-hexene and MO. In addition, the 2% Zn/TS-1 catalysts showed optimal conversions of 45.7 % and 75.41 % for 1-hexene and MO, respectively, and exhibited good catalytic stability and regeneration during the epoxidation process.

Air-Stable Cobalt(III) and Chromium(III) Complexes as Single-Component Catalysts for the Activation of Carbon Dioxide and Epoxides.

Cobalt(III) and chromium(III) salophen chloride complexes were synthesized and tested for the cycloaddition of carbon dioxide (CO2) with epoxides to obtain cyclic carbonates. The cat1, cat2, cat4, and cat5 complexes presented high catalytic activity without cocatalysts and are solvent-free at 100 °C, 8 bar, and 9 h. At these conditions, the terminal epoxides (1a-1k) were successfully converted into the corresponding cyclic carbonates with a maximum conversion of ∼99%. Moreover, cat5 was highlighted due to its capability of opening internal epoxides such as limonene oxide (1l) with a 36% conversion to limonene carbonate (2l), and from cyclohexene oxide (1m), cyclic trans-cyclohexene carbonate (2m) and poly(cyclohexene carbonate) were obtained with 15% and 85% selectivity, respectively. A study of the coupling reaction mechanism was proposed with the aid of electrospray ionization mass spectrometry (ESI-MS) analysis, confirming the single-component behavior of the complexes through their ionization due to epoxide coordination. In addition, crystallographic analysis of cat1 single crystals grown in a saturated solution of pyridine helped to demonstrate that the substitution of chloride ion by pyridine ligands to form an octahedral coordination occurs (Py-cat1), supporting the proposed mechanism. Also, a recyclability study was performed for cat5, and a total turnover number of 952 was obtained with only minor losses in catalytic activity after five cycles.

Nanoparticles as an antidote for poisoned gold single-atom catalysts in sustainable propylene epoxidation

The development of sustainable and anti-poisoning single-atom catalysts (SACs) is essential for advancing their research from laboratory to industry. Here, we present a proof-of-concept study on the poisoning of Au SACs, and the antidote of Au nanoparticles (NPs), with trace addition shown to reinforce and sustain propylene epoxidation. Multiple characterizations, kinetics investigations, and multiscale simulations reveal that Au SACs display remarkable epoxidation activity at a low propylene coverage, but become poisoned at higher coverages. Interestingly, Au NPs can synergistically cooperate with Au SACs by providing distinct active sites required for H2/O2 and C3H6 activations, as well as hydroperoxyl radical to restore poisoned SACs. The difference in reaction order between C3H6 and H2 (nC3H6-nH2) is identified as the descriptor for establishing the volcano curves, which can be fine-tuned by the intimacy and composition of SACs and NPs to achieve a rate-matching scenario for the formation, transfer, and consumption of hydroperoxyl. Consequently, only trace addition of Au NPs antidote (0.3% ratio of SACs) stimulates significant improvements in propylene oxide formation rate, selectivity, and H2 efficiency compared to SACs alone, offering a 56-fold, 3-fold, and 22-fold increase, respectively, whose performances can be maintained for 150 h.

Novel pH-sensitive triptolide-loaded micelles: a potential approach to increase anti-tumor activity of the diterpenoid epoxide

Tripterygium wilfordii Hook F, a traditional medicine in China has bioactive but toxic triptolide (TP, a diterpenoid triepoxide) as its main active constituents. The applications of TP are hampered by its prominent toxicity and low solubility in water. In this study, a safe pH-sensitive material [methoxy polyethylene glycol (mPEG)- adipic dihydrazide (ADH)] was synthesized and loaded with TP to form pH-sensitive polymeric micelles, thereby improving the safety and solubility of TP, as well as providing a theoretical basis for the wide application of TP. The mPEG-ADH/TP micelles were characterized by a series of indicators [namely entrapment efficiency (EE), critical micellar concentration (CMC), electrokinetic potential, stability, polydispersed index (PDI), and particle size]. Also, we ascertained the in vitro release of TP from mPEG-ADH/TP micelles along with pharmacokinetic investigations in vivo. Besides, we evaluated the cytotoxicity of mPEG-ADH/TP micelles against A549 cells, HCT116 cells, and HaCat cells and further conducted in vivo toxicity studies in rats. The TP-loaded mPEG-ADH micelles had smaller sized particles (48.3 nm), excellent PDI (0.142), stable property and higher EE (89.87%). Importantly, the TP in the mPEG-ADH/TP micelles was almost completely released at acidic pH (pH 5.0), while the drug was released slowly and sparingly at physiological pH (pH 7.4). The results suggest the release of TP from mPEG-ADH/TP micelles was sensitive to pH, which could facilitate targeting of the drug into intra-cellularly low pH endosomes and lysosomes as well as enhance cytotoxicity in cancer tissues. Moreover, mPEG-ADH/TP micelles exhibited excellent proliferation inhibition on tumor cells. In addition, the liver injury of rats in the 1 mg/kg dose of mPEG-ADH/TP micelles group was significantly reduced by Hematoxylin–eosin (HE) staining. Taken together, mPEG-ADH/TP micelles could act as a promising alternative to enhance the efficacy of oncologic treatments.

Halogenated melamine formaldehyde polymers: Efficient, robust and cost-effective bifunctional catalysts for continuous production of cyclic carbonates via. CO2-epoxide cycloaddition

Halogenated porous melamine polymers were demonstrated to be efficient catalysts for CO2-epoxide cycloaddition, selectively (>99%) producing C3-C12 cyclic carbonates in excellent yields (upto 99%) under solvent and co-catalyst free conditions. The halogenated polymers outperformed benchmark catalysts incorporating only basic (N-doped carbon, ZIF-8, N-rich melamine polymer) or nucleophilic (TBAB, KI) sites. The superior catalytic performance of these inexpensive polymers was attributed to their unique surface chemistry incorporating abundant, stable basic N sites (amine N and protonated N) and nucleophilic (Cl-, Br- or I-) that enabled simultaneous activation of both epoxide and CO2 molecule (supported by kinetic and DFT studies). Further, among halogenated polymers a Br- containing material (PMFBr) presented highest activity owing to its balanced CO2-philicity and strong nucleophilicity. Most importantly, PMFBr was robust, reusable and maintained stable performance for continuous production of C3-C4 cyclic carbonate (120 °C, 0.3–0.83 h-1 WHSVepoxide and 15 bar) in a fixed-bed reactor during 60–190 h TOS.

Noncrystalline Zeolitic Imidazolate Frameworks Tethered with Ionic Liquids as Catalysts for CO2 Conversion into Cyclic Carbonates.

Noncrystalline zeolitic imidazolate frameworks (ZIFs) tethered with ionic liquids (ILs) were successfully employed as catalysts for mild CO2 conversion into cyclic carbonates for the first time. Notably, noncrystalline ZIFs exhibit outstanding catalytic performance in terms of activity, stability, and substrate suitability. Z3 was obtained through the simultaneous incorporation of a boronic acid group and ILs into its ZIF framework and exhibited a superior catalytic activity. A reaction mechanism for the propylene oxide-CO2 cycloaddition has been proposed, which integrates experimental findings with density functional theory calculations. The results indicate that zinc, ILs, and boronic acid play crucial roles in achieving high activity. Zinc and ILs are identified as key contributors to epoxide activation and ring opening, while boronic acid plays a crucial role in stabilizing the turnover frequency-determining transition states. The simplicity of this ZIF synthesis approach, combined with the high activity, stability, and versatility of the products, facilitates practical and efficient conversion of CO2 and epoxides into cyclic carbonates.

Nickel‐Catalyzed Stereospecific Deoxygenation of trans‐ Aromatic Epoxides to (Z)‐Alkenes: An Efficient Route to Access (Z)‐Cinnamic Acid Derivatives

A stereospecific deoxygenation of trans‐epoxy cinnamic acid derivatives to access (Z)‐cinnamamides, (Z)cinnamyl alcohol and (Z)‐cinnamyl amines using a catalytic system based on nickel triflate and triphenylphosphine has been developed. The desired products were obtained in good to excellent yield (up to 92% isolated yield) and excellent stereospecificity (Z:E ratio up to > 99:1). The transformation has a broad functional group tolerance including amides, amines, alcohols and esters. The power of the methodology was demonstrated in the key step of the total synthesis of biologically active natural product, N‐cis‐feruloyl tyramine from readily available ferulic acid. A reaction mechanism involving activation of epoxide via coordination of the oxygen atom and the neighboring O‐ or N‐atoms to the nickel catalyst and formation of Ph3P‐carbon bond is proposed. This method is important for synthesis of highly desirable functionalized (Z)‐alkenes from readily available (E)‐alkenes.