Actinide Ions Research Articles

Iota-carrageenan as a regenerating system for Eu3+ recovery: adsorption/desorption cycles

ABSTRACT Renewable and biodegradable polysaccharides attract attention as environmentally friendly adsorbents for the removal of heavy metals from wastewater. One such group, is carrageenan, of which were recently successfully employed to adsorb representative lanthanide and actinide ions. Herein, iota-carrageenan-based hydrogels were used to adsorb europium ions (Eu3+) from water solutions, followed by desorption of the ions from the hydrogel beads and recycling of the beads three times. It was found that sorption yields from a 500 mg/L Eu3+ ion solution with beads that were prepared with 1 or 2 wt/v% aqueous solution of iota-carrageenan with CaCl2 (0.5 M) reached maximum sorption yield of 50% and 65%, correspondingly, after 1 h. In addition, the sorption kinetics followed the pseudo second-order model controlled by chemisorption. Desorption yields in the first cycle using NaNO3 (1 M) with both preparations were 57% and 74%, respectively. The sorption yields increased during the second and third cycles and were efficient in the overall pH range. Cryo-SEM, SEM, SEM-EDS and TGA analyses verified the adsorption and desorption of Eu3+ ions to and from the iota beads and that the Ca2+ ions that initially crosslinked the hydrogel were replaced during the cycles by Eu3+ or Na+ ions. In addition, the beads were stable and easily reusable for several sorption/desorption cycles. Furthermore, after sorption, the beads were characterised by a porous structure, such that beads prepared with a 2 wt/v% aqueous solution of iota-carrageenan yielded a more porous, ordered structure, and after desorption, the bead textures became even more porous.

6-(6-Methyl-1,2,4,5-Tetrazine-3-yl)-2,2'-Bipyridine: A N-Donor Ligand for the Separation of Lanthanides(III) and Actinides(III).

Here, we report the synthesis of the 6-(6-methyl-1,2,4,5-tetrazine-3-yl)-2,2'-bipyridine (MTB) ligand that has been developed for lanthanide/actinide separation. A multimethod study of the complexation of MTB with trivalent actinide and lanthanide ions is presented. Single-crystal X-ray diffraction measurements reveal the formation of [Ce(MTB)2(NO3)3], [Pr(MTB)(NO3)3H2O], and [Ln(MTB)(NO3)3MeCN] (Ln = Nd, Sm, Eu, Gd). In addition, the complexation of Cm(III) with MTB in solution was studied by time-resolved laser fluorescence spectroscopy. The results show the formation of [Cm(MTB)1-3]3+ complexes, which occur in two different isomers. Quantum chemical calculations reveal an energy difference between these isomers of 12 kJ mol-1, clarifying the initial observations made by time-resolved laser fluorescence spectroscopy (TRLFS). Furthermore, quantum theory of atoms in molecules (QTAIM) analysis of the Cm(III) and Ln(III) complexes was performed, indicating a stronger covalent contribution in the Cm-N interaction compared to the respective Ln-N interaction. These findings align well with extraction data showing a preferred extraction of Am and Cm over lanthanides (e.g., max. SFAm/Eu = 8.3) at nitric acid concentrations <0.1 mol L-1 HNO3.

Newly synthesised diglycolamide functionalised silica gel with terminal 2-ethylhexyl alkyl chain, Silica-DGA (2EH) having high ligand density for adsorption of trivalent actinide and lanthanide from acidic medium

A novel diglycolamide resin with 2-ethylhexyl terminal alkyl chain functionalised to silica gel was synthesised and characterised by ATR-FTIR, SEM, TG/DSC, &13C (CP/MAS) solid state NMR techniques. Effective functionalization of the organic ligand upon silica gel was confirmed from the two carbonyl stretching frequencies at 1735 cm−1 and 1619 cm−1 in the FTIR spectrum and carbonyl carbon atom signal at 170 ppm in 13C (CP/MAS) solid state NMR spectrum. Thermo gravimetric measurement showed 17.3 ± 0.2 % (W/W) weight loss corresponding to the ligand loading value of 425 µmol/g. The resin showed very high uptake of trivalent lanthanide and actinide ions from 4.0 M HNO3 medium and very low distribution of Cs & Sr; Kd ∼ 1.1×103 mL/g for Am(III), ∼ 1.41×103 mL/g for Eu(III), ∼2.5 mL/g for Sr and 1.53 mL/g for Cs. FTIR spectroscopic study of the Eu3+ adsorbed resin showed single carbonyl stretching frequency at 1654 cm−1, instead of the two carbonyl stretching frequencies in fresh silica-DGA(2EH) resin indicating complexation through carbonyl oxygen. Very low Kd of ∼1.2–5.1 mL/g for lanthanides/actinides from 4.0 M HNO3 containing water soluble DGA namely N, N, N, N, Tetraethyldiglycolamide (TEDGA) in the concentration range 0.3–0.1 M indicates 99 % back adsorption feasibility.

Covalency-Driven Differences in the Hydrogenation Chemistry of Lanthanide- and Actinide-Based Frustrated Lewis Pairs.

The electronic organization of Frustrated Lewis Pairs (FLPs) allows them to activate strong bonds in mechanisms that are usually free of redox events at the Lewis acidic site. The unique 6d/5f manifold of uranium could serve as an interesting FLP acceptor site, but to date FLP-like catalysis with actinide ions is unknown. In this paper, the catalytic, FLP-like hydrogenation reactivity of trivalent uranium complexes is explored in the presence of base-stabilized silylenes. Comparison to isoelectronic, isostructural lanthanide and thorium complexes lends insight into the electronic factors governing dihydrogen activation. Mechanistic studies of the uranium- and lanthanide-catalyzed hydrogenations are presented, including discussion of likely intermediates. Computational modeling of the f-element complexes, combined with experimental comparison to p-block Lewis acids, elucidates the relevance of steric hindrance to productive reactivity with dihydrogen. Consideration of the complete experimental and theoretical evidence provides a clear picture of the electronic and steric factors governing dihydrogen activation by these FLPs.

Highly charged ions of heavy actinides as sensitive probes for time variation of the fine-structure constant

Highly charged ions of heavy actinides as sensitive probes for time variation of the fine-structure constant

Understanding the separation of trivalent lanthanides and actinides using multiple diglycolamide-containing ligands: a review

Abstract The complexation and separation behaviour of trivalent actinides and lanthanides with various multiple diglycolamide (DGA) group-containing ligands are compiled in the present review. The DGA arms are anchored on various scaffolds, viz., C- and N-pivot tripodal backbones, benzene-centred tripodal backbones, calix[4]arene, pillar[5]arene and azamacrocycle scaffolds. Dendrimers of different generations having DGA arms were also evaluated for the extraction and complexation studies of trivalent actinide and lanthanide ions. The extraction efficiency of the DGA units increases significantly when they are grouped together on a single backbone/scaffold. Furthermore, the selectivity was found to improve in many cases, particularly with respect to the UO2 2+ ion. This is very important for the development of suitable ligands for the extraction/separation of the actinide and lanthanide ions. Combined experimental, luminescence and DFT studies on the complexation of trivalent actinides and lanthanides with these DGA-based ligands are quite useful to understand their extraction and separation behaviour and this review article gives a critical analysis of the results available in the literature.

Spectroscopic Study on the Complexation of trivalent Actinide and Lanthanide ions with TEDGA in Solution

AbstractNMR spectroscopy studies on the complexation of La(III), Sm(III), Lu(III), Y(III) and Am(III) with N,N,N′,N′‐tetraethyldiglycolamide (TEDGA) have been performed. Initial studies concerning the stoichiometry of the complexes prove the formation of [M(TEDGA)3]3+ in D2O and [M(TEDGA)1‐3]3+ in CD3CN. Decreasing the solvent polarity translates to an increase of the complex stability as shown by complementary TRLFS studies with Cm(III). Due to delocalization of the lone electron pair of the amide nitrogen atom, the M(III)−O interaction has been studied indirectly by collecting 13C and 15N NMR data. The observed chemical shifts prove that the interaction of the trivalent ions, An(III) and Ln(III), and TEDGA is almost identical.

F-Element heavy pnictogen chemistry.

The coordination and organometallic chemistry of the f-elements, that is group 3, lanthanide, and actinide ions, supported by nitrogen ligands, e.g. amides, imides, and nitrides, has become well developed over many decades. In contrast, the corresponding f-element chemisty with the heavier pnictogen analogues phosphorus, arsenic, antimony, and bismuth has remained significantly underdeveloped, due largely to a lack of suitable synthetic methodologies and also the inherent hard(f-element)-soft(heavier pnictogen) acid-base mismatch, but has begun to flourish in recent years. Here, we review complexes containing chemical bonds between the f-elements and heavy pnictogens from phosphorus to bismuth that spans five decades of endeavour. We focus on complexes whose identity has been unambiguously established by structural authentication by single-crystal X-ray diffraction with respect to their synthesis, characterisation, bonding, and reactivity, in order to provide a representative overview of this burgeoning area. By highlighting that much has been achieved but that there is still much to do this review aims to inspire, focus and guide future efforts in this area.

Extension of the D3 and D4 London dispersion corrections to the full actinides series.

Efficient dispersion corrections are an indispensable component of modern density functional theory, semi-empirical quantum mechanical, and even force field methods. In this work, we extend the well established D3 and D4 London dispersion corrections to the full actinides series, francium, and radium. To keep consistency with the existing versions, the original parameterization strategy of the D4 model was only slightly modified. This includes improved reference Hirshfeld atomic partial charges at the ωB97M-V/ma-def-TZVP level to fit the required electronegativity equilibration charge (EEQ) model. In this context, we developed a new actinide data set called AcQM, which covers the most common molecular actinide compound space. Furthermore, the efficient calculation of dynamic polarizabilities that are needed to construct CAB6 dispersion coefficients was implemented into the ORCA program package. The extended models are assessed for the computation of dissociation curves of actinide atoms and ions, geometry optimizations of crystal structure cutouts, gas-phase structures of small uranium compounds, and an example extracted from a small actinide complex protein assembly. We found that the novel parameterizations perform on par with the computationally more demanding density-dependent VV10 dispersion correction. With the presented extension, the excellent cost-accuracy ratio of the D3 and D4 models can now be utilized in various fields of computational actinide chemistry and, e.g., in efficient composite DFT methods such as r2SCAN-3c. They are implemented in our freely available standalone codes (dftd4, s-dftd3) and the D4 version will be also available in the upcoming ORCA 6.0 program package.

Dynamic dissolution of Cm3+ ions incorporated at the calcite-water interface: an ab initio molecular dynamics simulation study.

The stability of actinide-mineral solid solution in a water environment is critical for assessing the safety of nuclear-waste geological repositories and studying actinide migration in natural systems. However, the dissolution behavior of actinide ions incorporated at the mineral-water interface is still unclear at the atomic level. Herein, we present metadynamics simulations of the reaction pathways, thermodynamics and kinetics of trivalent curium ions (Cm3+) dissolving from calcite surfaces. Cm3+ ions incorporated in different calcite surfaces (i.e., terrace and stepped surfaces) with distinct coordination environments have different reaction pathways, free energy barriers and free energy changes. We found that Cm dissolution from a stepped surface is more favorable than that from a terrace surface, both thermodynamically and kinetically. In addition, water molecules seem to promote the detachment of curium ions from the surface by exerting a pulling force via water coordination with Cm3+ and a pushing force via proton migration to the surface layer and water diffusion in the vacant Cm site. Thus, the findings from this work prove to be a milestone in revealing the dynamic dissolution mechanism of trivalent actinides from minerals and would also help predict the dissolution behaviors of other metal ions at the solid-water interface in chemical and environmental sciences.

Th@C2(14)-C86 and Th@C3(18)-C86: two missing C86 isomers stabilized by the encapsulation of thorium

Two missing C86 isomers, C2(14)-C86 and C3(18)-C86, were successfully stabilized by the encapsulation of thorium.

Molybdenum sulphide clusters as redox-active supports for low-valent uranium.

The preparation of an actinide substituted cubane cluster, (Cp*3Mo3S4)Cp*UI2, and its reduced derivatives are reported. Structural and spectroscopic investigations provide insight into the unique interactions between the actinide and its redox-active molybdenum sulphide metalloligand, serving as a model to study atomically-dispersed, low-valent actinide ions on MoS2 surfaces. To probe the ability of the assembly to facilitate multielectron small molecule activation, the reactivity of the fully-reduced cluster, (Cp*3Mo3S4)Cp*U, with azobenzene was investigated. Addition of the substrate results in the formation of a cis-bis-imido cluster, (Cp*3Mo3S4)Cp*U(NPh)2. Cooperative reactivity between the actinide and redox-active support facilitates the 4e--reduction of substrate.

Structures of Th4+ aqueous solutions: insights from AIMD and metadynamics simulations.

Solution chemistry of actinide ions is critical to understanding the solvation behaviors and hydrolysis process. Using tetravalent thorium ion Th4+ as a representative example, we investigate the local structures and dynamic behaviors of hydrated Th4+ ions by ab initio molecular dynamics (AIMD) simulations using the recently developed norm-conserving pseudopotentials and basis sets optimized for actinides (J.-B. Lu et al., J. Chem. Theory Comput. 2021, 17, 3360-3371). AIMD simulations reveal two distinct solvation shells, with the first shell comprising 9 water molecules at approximately rTh-O = 2.50 Å and exhibiting a tricapped trigonal prism geometry. These conclusions are confirmed through metadynamics simulations and further structural analysis. AIMD simulations also show the slight effect of temperature and counterions on the structure of the solution. The structured solvation shells of the highly charged Th4+ ion with the specific geometry, distinct from the structure of liquid water, lead to corresponding structural changes in the hydrogen bond network in water. Additionally, beyond the solvent-shared ion pair (SIP) state observed in the unbiased AIMD simulations, the metadynamics simulations reconstruct a two-dimensional free energy surface that clearly indicates the potential stability of the contact ion pair (CIP) state in the system with Cl- as a counterion. The findings in this work provide insights into the solution chemistry of actinides and serve as a reference for studying other actinide solution systems.

Radionuclide Removal from Aqueous Solutions Using Oxidized Carbon Fabrics

The adsorption of actinide ions (Am(III) and U(VI)) from aqueous solutions using pristine and oxidized carbon fabrics was investigated by means of batch experiments at different pH values (pH 4, 7 and 9) and temperatures (25, 35 and 45 °C) under ambient atmospheric conditions. The experimental results indicated that both the pH and the fabric texture affected the adsorption rate and the relative removal efficiency, which was 70% and 100% for Am(III) and U(VI), respectively. The Kd (L/kg) values for U(VI) were generally found to be higher (2 &lt; log10(Kd)&lt; 3) than the corresponding values for Am(III) adsorption (1.5 &lt; log10(Kd) &lt; 2). The data obtained from the experiments regarding the temperature effect implied that the relative adsorption for both actinides increases with temperature and that adsorption is an endothermic and entropy-driven reaction. The application of the fabrics to remove the two actinides from contaminated seawater samples showed that both the relative removal efficiency and the Kd values decreased significantly due to the presence of competitive cations (e.g., Ca2+ and Fe3+) and complexing anions (CO32−) in the respective waters. Nevertheless, the removal efficiency was still remarkable (50% and 90% for Am(III) and U(VI), respectively), demonstrating that these materials could be attractive candidates for the treatment of radionuclide/actinide-contaminated waters.

A Hydrophobic Deep Eutectic Solvent for Nuclear Fuel Cycle: Extraction of Actinides and Dissolution of Uranium Oxide

AbstractHydrophobic Deep Eutectic Solvents (DESs) have been attracting attention for metal ion extraction in solvent extraction process due to their favorable properties. A Trioctyl phosphine oxide (TOPO) and Thenoyl trifluoroacetone (HTTA) based hydrophobic DES was synthesized and characterized by FTIR and NMR spectroscopy. Actinide ions ( UO22+, Pu4+ and Am3+) and Eu3+ ion extraction was carried out using the DES which shows that it extracts these metal ions from aqueous nitric acid medium depending upon the molarity of nitric acid. At higher molarity of nitric acid (&gt;5 M) the extraction becomes insignificant only for trivalent metal ions and open up the possibility to selectively strip trivalent metal ions from tetravalent and hexavalent ions. This DES was also used for dissolution of uranium oxide (UO3). The dissolution kinetics was studied and it was shown that oxide was dissolved within an hour at 80 °C. The maximum solubility of UO3 in DES was measured and found to be 130±5 mg/mL which is one of the highest reported solubility of UO3 in ILs and DES. The species of uranium which is formed in situ in DES was ascertained to be UO2(TTA)2.TOPO after dissolution of UO3 as supported by FTIR and NMR (1H and 31P) investigations.

Bispidine Chelators for Radiopharmaceutical Applications with Lanthanide, Actinide, and Main Group Metal Ions.

Octadentate and specifically nonadentate ligands with a bispidine scaffold (3,7-diazabicyclo[3.3.1]nonane) are known to be efficiently coordinated to a range of metal ions of interest in radiopharmaceutical chemistry and lead to exceedingly stable and inert complexes. Nonadentate bispidine L2 (with a tridentate bipyridine acetate appended to N3 and a picolinate at N7) has been shown before to be an ideal chelator for 111In3+, 177Lu3+, and 225Ac3+, nuclides of interest for diagnosis and therapy, and a proof-of-principle study with an SSTR2-specific octreotate has shown potential for theranostic applications. We now have extended these studies in two directions. First, we present ligand derivative L3, in which the bipyridine acetate is substituted with terpyridine, a softer donor for metal ions with a preference for more covalency. L3 did not fulfill the hopes because complexation is much less efficient. While for Bi3+ and Pb2+ the ligand is an excellent chelator with properties similar to those of L2, Lu3+ and La3+ show very slow and inefficient complexation with L3 in contrast to L2, and 225Ac3+ is not fully coordinated, even at an increased temperature (92% radiochemical yield at 80 °C, 60 min, [L3] = 10-4 M). These observations have led to a hypothesis for the complexation pathway that is in line with all of the experimental data and supported by a preliminary density functional theory analysis, which is important for the design of further optimized bispidine chelators. Second, the coordination chemistry of L2 has been extended to Bi3+, La3+, and Pb2+, including solid state and solution structural work, complex stabilities, radiolabeling, and radiostability studies. All complexes of this ligand (La3+, Ac3+, Lu3+, Bi3+, In3+, and Pb2+), including nuclides for targeted α therapy (TAT), single-photon emission computed tomography, and positron emission tomography, are formed efficiently under physiological conditions, i.e., suitable for the labeling of delicate biological vectors such as antibodies, and the complexes are very stable and inert. Importantly, for TAT with 225Ac, the daughter nuclides 213Bi and 209Pb also form stable complexes, and this is important for reducing damage to healthy tissue.

Theoretical study on the bonding and extraction properties of actinide (III) ions by 3,3′-sulfonyldithiophene, an O-donor ligand based on tetrahedral bonding S center

Theoretical study on the bonding and extraction properties of actinide (III) ions by 3,3′-sulfonyldithiophene, an O-donor ligand based on tetrahedral bonding S center

Actinide Ion (Americium-241 and Uranium-232) Interaction with Hybrid Silica-Hyperbranched Poly(ethylene imine) Nanoparticles and Xerogels.

The binding of actinide ions (Am(III) and U(VI)) in aqueous solutions by hybrid silica-hyperbranched poly(ethylene imine) nanoparticles (NPs) and xerogels (XGs) has been studied by means of batch experiments at different pH values (4, 7, and 9) under ambient atmospheric conditions. Both materials present relatively high removal efficiency at pH 4 and pH 7 (>70%) for Am(III) and U(VI). The lower removal efficiency for the nanoparticles is basically associated with the compact structure of the nanoparticles and the lower permeability and access to active amine groups compared to xerogels, and the negative charge of the radionuclide species is formed under alkaline conditions (e.g., UO2(CO3)34- and Am(CO3)2-). Generally, the adsorption process is relatively slow due to the very low radionuclide concentrations used in the study and is basically governed by the actinide diffusion from the aqueous phase to the solid surface. On the other hand, adsorption is favored with increasing temperature, assuming that the reaction is endothermic and entropy-driven, which is associated with increasing randomness at the solid-liquid interphase upon actinide adsorption. To the best of our knowledge, this is the first study on hybrid silica-hyperbranched poly(ethylene imine) nanoparticle and xerogel materials used as adsorbents for americium and uranium at ultra-trace levels. Compared to other adsorbent materials used for binding americium and uranium ions, both materials show far higher binding efficiency. Xerogels could remove both actinides even from seawater by almost 90%, whereas nanoparticles could remove uranium by 80% and americium by 70%. The above, along with their simple derivatization to increase the selectivity towards a specific radionuclide and their easy processing to be included in separation technologies, could make these materials attractive candidates for the treatment of radionuclide/actinide-contaminated water.

Theoretical insight on Cm(III) and Eu(III) competing with Am(III) for binding to N‐donor extractants with different dentate numbers

AbstractThe separation of actinides (An) from lanthanides (Ln) is crucial for nuclear resource recovery and reducing long‐term radiotoxicity. While numerous N‐donor ligands have been examined for the extraction separation of An and Ln, few studies have investigated the effect of the number of ligand dentate on bonding and extraction separation. To address this issue, we designed six pyridine‐based ligands with different numbers of coordination dentate. We employed density functional methods to investigate their bonding properties with Am(III), Cm(III), and Eu(III), as well as the thermodynamic differences in extracting and separating these metal ions. The NBO and QTAIM analyses indicate that the metal–ligand bonds are predominantly ionic. However, the Am‐N bond exhibits higher covalency compared to the Cm‐N and Eu‐N bonds, and it is also stronger than the latter two. This difference in bonding can be attributed to the greater involvement of the 5f orbitals of Am in coordination with the ligands, in contrast to the involvement of the Cm 5f and Eu 4f orbitals. Thermodynamic analysis reveals that the coordination ability of the ligands with metals does increase with the number of coordination teeth. However, the extraction separation effect of the ligand for Am/Cm and Am/Eu does not show a strong correlation with the number of coordination dentate. We hope that this study can offer valuable theoretical support for the design of ligands aimed at the separation of actinide(III) and lanthanide(III) ions.

Competitive Distribution of Europium and Samarium Based on Reaction Rate-Limiting Process in Nitrilotriacetamide Extractant-Impregnated Polymer-Coated Silica Particles

Abstract Since in the nuclear fuel cycle, multiple lanthanide and actinide ions are separated by chromatography, understanding the mass transfer mechanism in the solution with multiple ions, which is generally difficult, is important for effective separation. In the present study, we have elucidated the mass transfer mechanism of Eu(III) and Sm(III) in a solution with these ions in single nitrilotriacetamide (NTA) extractant-impregnated polymer-coated silica particles. The rate-limiting process of mass transfer was the reaction of ions with NTA molecules, in which the NO3− ions were not involved, which was consistent with that obtained in a single ion distribution system. In a two-ion distribution system, the competitive reaction of Eu(III) and Sm(III) with NTA molecules was observed. The forward and backward reaction rate constants of Eu(III) and Sm(III) were determined to be $k_{1}^{\text{Eu}}$ = (1.8 ± 0.7) × 102 M−2 s−1 and $k_{ - 1}^{\text{Eu}}$ = (6.1 ± 5.3) × 10−4 s−1, and $k_{1}^{\text{Sm}}$ = (1.9 ± 0.5) × 102 M−2 s−1 and $k_{ - 1}^{\text{Sm}}$ = (5.8 ± 4.6) × 10−4 s−1. The obtained result indicates that in the near future the mass transfers of several ions in the particle can be analyzed with the present method.