Acrylic Plate Research Articles

MoMa: An assistive mobile manipulator with a webcam-based gaze control system

Mobile Manipulators (MoMa) is a category of mobile robots designed to assist people with motor disabilities to perform object retrieval tasks using a webcam-based gaze control system. Using off-the-shelf components such as reproducible acrylic and 3D-printed plates, and a webcam for eye tracking, MoMa serves as an inexpensive, open-source, and customizable solution in assistive robotics. The robotic system consists of a mobile base that can move forward and backward, as well as turn in place; and a 2-axis cartesian arm equipped with a claw gripper that opens and closes. The simple movement of the robot also allows for a simple control method and graphical user interface (GUI). The user receives information about what is in front of the robot through a mounted camera, and, by looking at parts of the screen that correspond to controls, has their gaze predicted by a convolutional neural network and sends commands wirelessly. The performance of the entire system has been validated through testing of the gaze prediction model, the integration of the control system, as well as its task completion capabilities. All the design, construction and software files are freely available online under the CC BY 4.0 license at https://doi.org/10.17632/k7yfn6wdv7.2.

A simple method for insulating sidewalls of the cathode tool to enhance precision in ECDM

Conventional micro-turning of metal materials with low rigidity and hardness is highly challenging. Electrochemical Discharge Machining (ECDM) offers an alternative approach for fabricating micro shafts. However, micro-turning by ECDM often leads to severe flaring at the shaft shoulder due to stray corrosion. To mitigate this issue, we propose two novel methods for insulating the sidewalls of the cathode tool: applying insulating tape to the sides of a rectangular cathode tool or attaching aluminum foil along the bottom edge of a rectangular acrylic plate. We evaluated the machining performance of these cathode tools on the 3 mm diameter copper rods. Experimental results demonstrate that using an acrylic plate with attached aluminum foil as the cathode tool significantly enhances machining accuracy in the transition area of the shaft shoulder. Additionally, the simplicity and reliability of this method highlight its advantages.

Failure Prediction of an Airfoil-Type Crack in Thermoelectric Coupling Materials

Airfoil-type cracks with curved surfaces and sharp tips are frequently encountered in modern engineering applications and the aerospace industry. However, such cracks significantly threaten structures due to stress concentration and further cause damage. This study investigates the theoretical analysis and failure prediction of airfoil-type cracks within thermoelectric coupling materials under the interaction of remote mechanical loads, heat flux and electric current density. By employing complex variable theory, conformal mapping methods, and the analytic continuation theorem, the full-field stress and stress intensity factors of an airfoil-type crack were determined under three different loading conditions. The results indicate that when the airfoil-shaped crack tip is subjected to horizontal compression, vertical tensile mechanical load, and both heat flux and current density parallel to the crack, the crack tip would reach a dangerous state. Additionally, the full-field stress distribution reveals stress concentration around the crack tip, which explains variations in SIFs under different external forces and shape factors. Four critical situations suppressing crack propagation under mixed loading conditions are proposed. Furthermore, using an acrylic plate and bismuth telluride alloy as examples, the critical values of external loading for the mixed-mode fracture are determined based on the strain energy density criterion. These critical values can be used to predict failure initiation, thus reducing the risk of structural failure due to airfoil cracks within thermoelectric coupling materials.

Survey - Based Study For Common Retention Practices Among Orthodontists In North Macedonia

Background: Orthodontic therapy always ends with retention to prevent the return of the final occlusal outcome and to maintain the teeth in the correct position after the end of orthodontic therapy. This research aimed to survey retention practices, factors affecting retention protocol and differences regarding retention among orthodontists in North Macedonia. Material and methods: 150 questionnaire copies were distributed by mail or personally to orthodontics in North Macedonia. The survey included 24 single or multiple-answer questions, about retention system, frequently used fixed and removable retainers in certain malocclusions, the duration of the retention period, retainer supervision, instructions for patients, and the need for retention guidelines in order to determine habits and knowledge, and reasons for choosing a particular retention regime. Results : Out of 150 questionnaires, 93 were appropriately filled out and returned, so response rate was 62%. 90% give oral information about retention, only 25% informed their patients both oral and written. The most preferred retainer in maxilla (54%) was vacuum-formed appliance, than removable acrylic plate appliance (41%) and only 9% bonded retainer. In mandible, mostly used are VFR (45%), then acrylic plate appliance (29%), bonded retainers (20%). Dual retention was used more in upper jaw. The retention period was 4 to 5 years or lifelong; the choice of retention device in 77% depended on malocclusion. The reason for the choice of VFR are availability (50,5%), quality (36,56%), low-cost (33,3%). Protocol was influenced by clinical experience (75%), knowledge from residency (58%), courses (56%) and from colleagues (40%). 83% made changes in retention protocol in past years, in appliance time (20%) or in retention period (19%). 95,7% of the surveyed orthodontists believe that general guidelines for retention are needed. Conclusions: The most preferred retainers in North Macedonia were vacuum-formed appliance, than removable acrylic plate appliance and at least bonded retainer. Combination of fixed and removable appliance in mandible were used less than in upper jaw. Reason for choosing was malocclusion. Retention protocols are influenced mostly by the clinical experience. Common retention guidelines are required for most orthodontists.

The The Effect of Immersing Basil Leaves Infusion (Ocimum Sanctum L) on The Surface Roughness of Heat Cured Acrylic Resin Plates

The The Effect of Immersing Basil Leaves Infusion (Ocimum Sanctum L) on The Surface Roughness of Heat Cured Acrylic Resin Plates

Analysing the reasons why patients with complete missing teeth seek re-prosthodontics

Basic construction material of such dental constructions is not without well-known disadvantages. Identification of the main reasons for the replacement of complete removable acrylic plate dentures will make it possible to find the most relevant area for development in the field of improvement of this type of prosthetics.AIMS: To assess the reasons for patients' requests for replacement of complete removable acrylic dentures.METHODS: In the period from 2021 to 2022, a comprehensive dental examination of patients with complete absence of teeth who sought dental prosthetic care to replace previously used full removable plate prostheses was carried out, the reasons for the need for a new dental structure of this type and the frequency of their occurrence in the near and distant future were determined. Statistical differences between the indicators were assessed using the nonparametric method of analysis - the χ2 test. In order to assess the risk of a particular cause of referral, relative risk was calculated at 95% confidence interval.RESULTS: The main reason for the patients with complete absence of teeth to replace the operated full removable plate prosthesis in the period up to 3 years is one or another mechanical breakage. After three years of use of this type of dental structure, risk of mechanical failure and functional deficiencies statistically significantly increases by 1.8 and 1.6 times respectively. When prostheses are used for more than 6 years, referrals due to various functional deficiencies begin to dominate the percentage with 58.3%.CONCLUSIONS: The increasing risk of functional defects in the form of impaired fixation and stabilisation makes it necessary to develop a set of measures to prevent the development of atrophic processes in the alveolar bone tissue of the upper and lower jaw alveolar processes, as well as dystrophic changes in the mucous membrane of the denture bed.

Application of acrylic plates as load cell for detecting strain and force in structures

This study presents the use of two superimposed transparent acrylic plates as a load cell for strain and force measurement. The gap between the plates behaves like an interferometer. When a monochromatic light beam is incident upon the gap, it interacts with the two air-acrylic interfaces, causing constructive and destructive interference. This phenomenon results in the formation of an interference pattern. Interferometers are devices used for high-precision measurements. In this work, the strain and force applied to an aluminum bar were precisely measured using two acrylic plates fixed to the bar. The experiments showed that the proposed method has a measurement range of 0–60[Formula: see text] and a resolution of 0.27[Formula: see text]. It is demonstrated that the proposed method offers a low-cost strain measurement technique with a wider measurement range compared to fiber optic sensors

An improved DFD method for three-dimensional displacement measurement of vision-based tactile sensor

Currently, traditional tactile sensors based on the principles of capacitance or piezoelectricity have complex structures and difficulty in obtaining tactile information. A vision-based tactile sensor is introduced which can realize visual measurement of three-dimensional displacement in this paper. The vision-based tactile sensor is mainly composed of an elastomer embedded with marker point array, a transparent acrylic plate, 8 LED lights and a micro monocular camera. The elastomer deforms when the tactile sensor contacts an object, and the micro monocular camera is used to capture the elastomer deformation and transmit it to the computer in the form of image, and then the three-dimensional displacement information is obtained by processing the image. In order to more accurately recover the missing dimensional information in the three-dimensional displacement detection of monocular camera, an improved DFD (Depth from Defocus) method based on finite element theory is proposed in this paper. It is verified by experiments that the improved DFD method proposed in this paper can measure the three-dimensional displacement information more accurately compared with the DFD method. In addition, an experiment is conducted to prove the robustness of the improved DFD method on the robotic gripper. The experimental results demonstrate that the three-dimensional displacement measurement method proposed in this paper can provide technical support for the design and development of vision-based tactile sensors.

Small field measurements using electronic portal imaging device

Purpose/Objective. Small-field measurement poses challenges. Although many high-resolution detectors are commercially available, the EPID for small-field dosimetry remains underexplored. This study aimed to evaluate the performance of EPID for small-field measurements and to derive tailored correction factors for precise small-field dosimetry verification. Material/Methods. Six high-resolution radiation detectors, including W2 and W1 plastic scintillators, Edge-detector, microSilicon, microDiamond and EPID were utilized. The output factors, depth doses and profiles, were measured for various beam energies (6 MV-FF, 6 MV-FFF, 10 MV-FF, and 10 MV-FFF) and field sizes (10 × 10 cm2, 5 × 5 cm2, 4 × 4 cm2, 3 × 3 cm2, 2 × 2 cm2, 1 × 1 cm2, 0.5 × 0.5 cm2) using a Varian Truebeam linear accelerator. During measurements, acrylic plates of appropriate depth were placed on the EPID, while a 3D water tank was used with five-point detectors. EPID measured data were compared with W2 plastic scintillator and measurements from other high-resolution detectors. The analysis included percentage deviations in output factors, differences in percentage for PDD and for the profiles, FWHM, maximum difference in the flat region, penumbra, and 1D gamma were analyzed. The output factor and depth dose ratios were fitted using exponential functions and fractional polynomial fitting in STATA 16.2, with W2 scintillator as reference, and corresponding formulae were obtained. The established correction factors were validated using two Truebeam machines. Results. When comparing EPID and W2-PSD across all field-sizes and energies, the deviation for output factors ranged from 1% to 15%. Depth doses, the percentage difference beyond dmax ranged from 1% to 19%. For profiles, maximum of 4% was observed in the 100%–80% region. The correction factor formulae were validated with two independent EPIDs and closely matched within 3%. Conclusion. EPID can effectively serve as small-field dosimetry verification tool with appropriate correction factors.

Comparative Assessment of the Adhesion Forces of Soft Silicone Materials to the Denture Base Material (PMMA) Conditioned with Sandblasting.

In patients undergoing surgery for oral cancer, soft support materials are used to minimise trauma to the soft tissues. Silicone-based liners are widely used in prosthetic dentistry. A prerequisite for long-term Adhesion of the liner to the denture base is largely dependent on the surface preparation of the denture material. The aim of the present study was to investigate whether surface preparation of the acrylic material by sandblasting increases the adhesion of the silicone support material to the acrylic denture plate. The study included adhesion testing of four silicone-based soft cushioning materials (Silagum Comfort, Elite Soft Re-lining, Ufi Gel SC, Mucopren Soft) on a total of 270 samples. Each material was tested on 15 samples. Three subgroups with different surfaces were separated: 1 raw-standard surface treatment with a cutter, and 2 sandblasted, with 100 and 350 µm alumina grain at 90°. The samples were subjected to seasoning: 24 h and six weeks. The adhesion force of silicone to acrylic was measured by performing a tensile test using a universal two-column testing machine. The highest bond strength was recorded for Silagum on the surface prepared using 100 µm abrasive and seasoned for 6 weeks (291.5 N). The smallest among the maximum forces was recorded for the Mucopren material (81.1 N). For the Mucopren system with a raw and sand-blasted surface (350 µm), the adhesion strength increased after six weeks. In contrast, the durability of the joint decreased for the 100 µm sandblasted surface. The Elite material exhibited similar values for maximum forces (271.8 N) and minimum forces (21.1 N). The highest strength (226.1 N) was recorded for the sample from the group prepared with 350 µm abrasive and seasoned for 24 h. The lowest value (72.6 N) occurred for the sample from the group with 100 µm abrasive and seasoned for 6 weeks. Sandblasting of acrylic plastic improves adhesion to selected relining silicones. 2. The size of the abrasive employed has an impact on the adhesion between the acrylic plastic and the bedding silicone. 3. In the case of some relining systems (Mucopren), an increase in roughness through sandblasting has the effect of reducing the durability of the bonded joint.

Relations between tactile sensitivity of the finger, arm, and cheek skin over the lifespan showing decline only on the finger.

Touch sensitivity generally declines with age, contributing to loss of manual dexterity and tactile function. We investigated how touch changes over the lifespan, using different tests and on three body sites. We used a classical test of force detection sensitivity, where calibrated monofilaments were applied passively to the right index finger pad, forearm, and cheek. In addition, at the index, we used an active touch spatial discrimination task, developed by our group. Spatial discrimination was estimated through participants' ability to evaluate the distance between parallel bands printed on acrylic plates. Data were collected from 96 healthy women, aged 20-75 years. Force detection and tactile spatial discrimination on the index deteriorated significantly with age; however, no change was found for tactile detection on the forearm or cheek. Tactile detection on the cheek remained remarkably highly sensitive throughout life. There was a significant positive relationship between force detection and spatial discrimination on the index. Further, force detection on the forearm was significantly associated with detection on the index and cheek. Our results suggest a decrease in touch perception with age on the index finger pad, yet a preservation of tactile sensitivity in hairy skin. This opens discussion about the impact of daily activities upon the glabrous hand skin and on the function of hairs in tactile sensitivity. We highlight the need for new methods in evaluating tactile sensitivity on hairy skin.

Penyusunan Material Produk Hand Craft Di Home Industri

Goods storage is very important in every business. Having proper, good storage will make it easier for a business to run its business. However, storage of goods will not be effective if the arrangement of goods is not arranged properly. Hand craft products are businesses engaged in the field of handicrafts that produce several products such as: plaques, house numbers, key chains, acrylic boxes which are produced on a large scale, for this reason product classification is needed to make it easier for workers in this business. The ABC classification method is the most effective method, dividing items into classes and assigning to each class a set of areas in which the product belongs. From the research results, group A was obtained, namely plaques, name plates and key chains, while group B was acrylic house numbers, anchors, character wall clocks, and acrylic motorbike plates and group C was acrylic boxes, where group A was preferred.

Latent fingerprint visualization with the novel white fluorescent fingerprint powders

Based on carbazole derivatives, a new fluorescent dye G-D was constructed. White fluorescent fingerprint powder was constructed by proportionally blending montmorillonite with G-D and the previously synthesized dyes (B-D and R-D). White fluorescent fingerprint powder is obvious in the dark and can be subjected to minimal fluorescent background interference. The white fluorescent fingerprint powder was successfully used to develop latent fingerprints left on various surfaces, including glass, tin foil, marble, acrylic plate with bright fluorescence, painted wood and coins. Impressively, the white fluorescent fingerprint powder also has excellent applications in developing aged fingerprints and replication. For complex criminal investigation activities, the white fingerprint powder with high resolution, wide applicability and real-time development is a competitive visualization means.

Effectiveness of Pineapple (Ananas comosus (L) Merr) Ethanol Extract in Inhibiting Microbes in Biofilm on Acrylic Resin Denture Plates

Artificial acrylic resin tooth plates can get stained and accumulate plaque with various harmful microorganisms. Hence, a natural ingredient-based denture cleanser is required to prevent or remove extrinsic stains and plaque on the dental plates of acrylic resin dentures. The research objective is to demonstrate the efficacy of pinelapplel elxtract in relmoving or minimizing plaqulel on artificial telelth and to asselss thel elffelct of ulsing pinelapplel elxtract as a clelaning agelnt on thel qulality of lifel of delntulrel welarelrs. This relselarch is a laboratory elxpelrimelnt with a post telst only control groulp delsign. Thel stuldy samplels welrel pulrel culltulrel isolatels of Staphylococculs aulreluls, Elntelrococculs facialis, and Strelptococculs gordonii. This relselarch had six groulps, namelly pinelapplel elthanol elxtract 5%, 10%, 25%, 50%, positivel and nelgativel controls by calcullating thel samplel sizel ulsing thel Feldelrelr formulla and geltting relplication for elach groulp 4 timels. Data welrel elxamineld ulsing onel-way ANOVA and Posthoc LSD statistical melthods. According to thel relselarch findings, it can bel claimeld that pinelapplel elthanol elxtract is elffelctivel in prelvelnting thel growth of Staphylococculs aulreluls, Elntelrococculs faelcalis, and Strelptococculs gordonii bactelria. Thel relselarch conclulsion is that pinelapplel elthanol elxtract can elliminatel or minimizel plaqulel-caulsing microbels on artificial acrylic relsin tooth platels to elnhancel thel qulality of lifel of delntulrel welarelrs

Comparison of different maxillary advancement protocols in patients with unilateral cleft lip and palate: a finite element analysis.

The aim of this study was to evaluate the stress distributions and possible amount of movement in the maxillofacial region resulting from different maxillary advancement protocols in patients with unilateral cleft lip and palate. A unilateral cleft lip and palate model (CLP model) with Goslon score 4 was created for finite element analysis. Three different protocols were compared: Group 1: usage of a face mask with elastics placed at a 30? angle to the occlusal plane over a conventional acrylic plate; Group 2: usage of a face mask with elastics placed at a 30? angle to the occlusal plane over miniplates placed in the infrazygomatic crest region; Group 3: usage of elastic from the menton plate placed in the mandible to the infrazygomatic plates in the maxilla. Dental effects were greater in the maxillary protraction protocol with a face mask over a conventional acrylic plate (Von Misses Stress Values; Group 1?=?cleft side:0.076, non-cleft side:0.077; Group 2?=?cleft side:0.004, non-cleft side: 0.003; Group 3?=?cleft side:0.0025; non-cleft side:0.0015), whereas skeletal effects were greater in maxillary protraction protocols with face mask using skeletal anchorage (Von Misses Stress Values; Group 1:0.008; Group 2:0.02; Group 3:0.0025). The maximum amount of counterclockwise rotation of the maxilla as a result of protraction was observed in traditional acrylic plate face mask protocol, and the minimum amount was observed by using elastics between infrazygomatic plates and menton plate. In individuals with unilateral cleft lip and palate with Goslon score 4, it was observed that the skeletally anchored face mask caused more skeletal impact and displacement than both the traditional acrylic plate face mask model and the pure skeletally supported maxillary protraction model. When planning maxillary protraction treatment in patients with cleft lip and palate, it should be considered that more movement in the sagittal plane might be expected on the cleft side than the non-cleft side, and miniplate and screws on the cleft side are exposed to more stress when using infrazygomatic plates as skeletal anchorage.

Effectiveness biduri leaf extract (Calotropis gigantea) as a denture cleanser in acrylic immersion against the growth of Candida albicans: an experimental laboratory

ABSTRACTIntroduction: The high number of cases of tooth loss in Indonesia has led to the emergence of dentures. Dentures not appropriately kept clean can trigger cases of denture stomatitis due to Candida albicans. C. albicans is often detected on denture plates and causes denture stomatitis. Cleaning the dentures can prevent denture stomatitis, and chemical cleaning often uses synthetic materials such as alkaline peroxide. However, alkaline peroxide can cause side effects in the form of increased porosity on the surface of the acrylic plate, so an alternative natural ingredient, namely biduri leaves (Calotropis gigantea), is needed because it has various active compounds such as alkaloids, flavonoids, phenols, saponins, terpenoids and tannins which have antifungal effects. This study aimed to determine the effective inhibitory power of biduri leaf extract as a denture cleanser in acrylic immersion against the growth of C. albicans. Methods: Biduri leaves were extracted using the maceration method with 70% ethanol solvent to produce varying concentrations of 20, 30, 40, and 50%. The sample used in this research was an acrylic plate measuring 10x10x1 mm, soaked in artificial sterile saliva for 1 hour, then soaked in each sample group for 8 hours, after that it was placed in 10 ml of Sabouraud Dextrose Broth (SDB) media, and vibrated for 30 seconds using a mixing vortex, spreading 0,1ml SDB on Saboraud Dextrose Agar (SDA) and incubated for 48 hours. The growth of C. albicans was observed and counted using the colony counting method. Result: This research showed an inhibitory power of biduri leaf extract in concentrations of 20, 30, 40, and 50% on the growth of C. albicans, with a concentration of 50%, having the most significant inhibitory power. Conclusion: Biduri leaf extract as a denture cleanser has an inhibitory power on the growth of C. albicans.KEYWORDS Biduri leaves, Calotropis gigantea, heat cured acrylic, Candida albicans

Construction of an innovative system for isolating and transporting people with infectious diseases

Objective: To propose the construction of an innovative system to isolate and transport people with infectious and contagious diseases with total safety to the physical integrity of both the health professionals involved in this activity and the patient himself. Material and Methods: The product was designed in TopSolid parametric design software, and its structure was manufactured with metallic plates, metalon, acrylic plates and a control system. Every automation system through pneumatics was made using pressure and flow controllers through the use of a PLC (programmable logic controller), thus allowing the insertion of medical protocols. The system allows air to exit the hermetic chamber (whether atmospheric and/or oxygen) sanitized, thus allowing a continuous flow with pressure and flow control without risk of infecting the external environment. Results: The results showed a great innovation that consisted of creating a proof of concept for use in hospitals, SAMUs, ambulances and aircraft, allowing safe isolation and transport for all involved. Conclusion: The innovative system for isolating and transporting people with infectious and contagious diseases proves to be effective for what was proposed, promoting technological innovations in the face of what already exists worldwide.

Enhancing Single-Plane Fluoroscopy: A Self-Calibrating Bundle Adjustment for Distortion Modeling.

Single-plane fluoroscopy systems with image intensifiers remain commonly employed in a clinical setting. The imagery they capture is vulnerable to several types of geometric distortions introduced by the system's components and their assembly as well as interactions with the local and global magnetic fields. In this study, the application of a self-calibrating bundle adjustment is investigated as a method to correct geometric distortions in single-plane fluoroscopic imaging systems. The resulting calibrated imagery is then applied in the quantitative analysis of diaphragmatic motion and potential diagnostic applications to hemidiaphragm paralysis. The calibrated imagery is further explored and discussed in its potential impact on areas of surgical navigation. This work was accomplished through the application of a controlled experiment with three separate Philips Easy Diagnost R/F Systems. A highly redundant (~2500 to 3500 degrees-of-freedom) and geometrically strong network of 18 to 22 images of a low-cost target field was collected. The target field comprised 121 pre-surveyed tantalum beads embedded on a 25.4 mm × 25.4 mm acrylic base plate. The modeling process resulted in the estimation of five to eight distortion coefficients, depending on the system. The addition of these terms resulted in 83-85% improvement in terms of image point precision (model fit) and 85-95% improvement in 3D object reconstruction accuracy after calibration. This study demonstrates significant potential in enhancing the accuracy and reliability of fluoroscopic imaging, thereby improving the overall quality and effectiveness of medical diagnostics and treatments.

Demonstration of nonlinear tuning curve vibration response using a homemade analog sweep spectrum analyzer

A super-heterodyne sweep spectrum analyzer has been designed (using analog circuitry), built and tested to cover the 5 to 1000 Hz range. The analyzer employs a linear ramp voltage versus time, driving a voltage-controlled oscillator VCO that generates a sweep from 32.768 kHz to 33.768 kHz in 70 s. An analog AD734 multiplies the VCO signal by a sinusoidal signal (generated by a watch crystal 32.768 kHz oscillator). The “mixer” signal is low-pass filtered and amplified to generate a 5-1000 Hz swept tone using a 2-in. speaker. The accelerometer (mounted on a thin circular clamped acrylic plate) vibration response involves multiplying this signal by the VCO, then filtering this “mixer” signal using a 4-stage watch crystal ladder filter with a 1 Hz bandwidth. This signal is squared and low-pass filtered to generate the time (converted to frequency) vs. mean-squared voltage response on an oscilloscope. In the demonstration, 300 g of 6 mm diameter glass beads are supported by the 11.4 cm diam, 3.2 mm thick plate and upper rigid cylindrical wall column. The nonlinear tuning curve vibration response is recorded for various incremental drive amplitudes to demonstrate that the tuning curve resonant frequency significantly decreases with increasing drive amplitude.

The impact of soaking heat-cured acrylic resin’s surface roughness in turmeric tamarind solution

Background: Dentures are a solution for the issue of tooth loss. Heat-cured acrylic resin is a common base material for dentures in dentistry. When exposed to acids frequently, the acrylic plate's surface becomes rough. Because of their health advantages, turmeric tamarind herb is commonly taken. Turmeric rhizomes and tamarind fruit are used to make herbal turmeric tamarind. The citric acid in tamarind fruit reduces the surface tension of acrylic resin that has undergone heat curing, increasing porosity and roughness. Materials and Method: 24 heat-cured acrylic resin plates that were pretested and divided into two groups of packed and unpackaged tamarind turmeric herbs were used in the laboratory experiment. The pH value of each group was measured. Each group's 12 samples were soaked for 1, 3, 5, or 7 days before the roughness was gauged and examined. Result: An analysis of the data using the two-way ANOVA test revealed a significant difference between the length of the immersion and the surface roughness of the heat-cured acrylic resin of 0.023 (0.005). However, the difference between the packaged and unpackaged turmeric tamarind groups was just 0.131 (> 0.005). Conclusion: The harshness of the heat-cured acrylic resin was altered by the soaked time in the tamarind turmeric herb. The development of roughness can be affected by some factors, including the presence of acids, especially citric acid, liquid absorption, pH, the breaking down of polymer bonds, the level of hydrogen ions, and improper packing methods.