Acrylic Patterns Research Articles

Fabrication of Computer-Aided Design and Computer-Aided Manufacturing (CAD/CAM) post and core using indirect digitalisation technique

The advancement of digital technology in dentistry signifies an opportunity for the clinician to explore novel techniques in fabricating post and core. Conventional custom-made post and core is constructed in the laboratory with very limited material either gold, nickel-chromium or cobalt-chromium. Apart from higher modulus elasticity compared to dentin, the colour of the conventional custom-made post and core was also unaesthetic making it inferior to be used with all ceramic crown. This article describes post and core fabrication technique using computer-aided design and computer-aided manufacturing (CAD/CAM) technology with acrylic resin pattern build-up and indirect digitalisation method. The same procedure for custom-made metal post and core was adopted in this case to capture the anatomical shape of the root canal before digital technology was incorporated in the fabrication of post and core manufacture using CAD/CAM. With the CAD/CAM approach, an increased in quality, productivity, workflow efficiency and consistency of prosthetic rehabilitation may be obtained. It also enables clinicians to fabricate post and core using tooth colour material with better physical properties and improved mechanical qualities to achieve the best result in restoring endodontically treated teeth.

COMPARISON OF CORONAL MICROLEAKAGE OF CAST POST AND CORE, CEMENTED WITH CONVENTIONAL GLASS IONOMER CEMENT AND GLASS IONOMER CEMENT INCORPORATED WITH NANO-HYDROXYAPATITE PARTICLES: AN IN VITRO STUDY

Statement of Problem: Microleakage is one of the major factors that determine the longevity of xed restoration. The type of luting agent used for cementation of post plays an important role in preventing bacterial microleakage. Purpose: To evaluate coronal microleakage of teeth restored with cast post and core cemented with conventional glass ionomer cement and nanohydroxyapatite incorporated glass ionomer cement. Materials and Method: 30 extracted single canal premolars were selected and endodontically treated by step-back technique, followed by obturation with gutta percha using zinc oxide eugenol sealer. Post space was prepared leaving 4mm of apical gutta percha and direct acrylic resin pattern of the root canal was made along with a core, with the help of pinjet system. This was then casted using cobalt-chromium alloy. The specimens were divided into 2 groups in which castings will be cemented using: Group 1, Conventional Glass Ionomer Cement; Group 2, Nano Hydroxyapatite incorporated Glass Ionomer Cement (6 wt%) Cemented teeth were stored in distilled water for 7 days and then immersed in silver nitrate dye for 6 hours followed by photochemical developing solution for 12 hours and nally sectioned into two halves mesiodistally. The degree of linear dye penetration into the coronal part of the specimens at dentin/cement interface was measured using a stereomicroscope at 20x magnication. Result: Coronal microleakage of cast post and core at tooth-cement interface, cemented with glass ionomer cement incorporated with 6% by weight of 80-100nm nano-hydroxyapatite particles and conventional glass ionomer cement were statistically signicant different with p = 0.015 by independent t test. The mean ± SD of conventional GIC was 2.47±0.74 and for nano-hydroxyapatite incorporated GIC was 1.73±0.80. Conclusion: Within the limitations of this study, it is concluded that the coronal microleakage of cast post and core at tooth-cement interface, cemented with glass ionomer cement incorporated with 6% by weight of 80-100nm nano-hydroxyapatite particles is less than that of conventional glass ionomer cement

Microleakage of different temporary luting agents used for cementing provisional restorations on custom cast posts and cores

This study aimed to compare the effect of four temporary luting agents on preventing the coronal microleakage of teeth restored with custom cast post and core. In this in vitro original study, after removing 9 mm of gutta percha from root canals of 32 single-canaled premolars, the acrylic resin patterns of the post and core were fabricated. Patterns were cast with Ni-Cr metal alloy and then cemented with glass ionomer. Using self-curing acrylic resin, provisional restorations were made. Then, teeth were randomly allocated to four groups for each temporary cement including zinc oxide eugenol (Temp Bond), zinc oxide noneugenol (Temp Bond NE), noneugenol resin-based temporary luting agent (Temp Bond Clear), and noneugenol urethane methacrylate polymer-based temporary luting agent (Dento temp). Teeth were subjected to thermocycling, immersed in silver nitrate for 6 h and then sectioned. The amount of dye penetration in the margin of provisional crown and into the coronal part of the root canals was measured using a stereomicroscope. Data were analyzed using the Kruskal-Wallis and Dunn tests with significance level of 0.05. All the luting agents showed some degree of microleakage (Group 1 showed the most microleakage). According to the pair comparison between the groups, Group 1 revealed a significant difference with others (P < 0.05). Furthermore, Group 2 showed more microleakage as compared to Group 4 (P = 0.037). Temp Bond showed the highest microleakage as compared to other luting agents. Furthermore, Temp Bond NE revealed a weaker sealability as compared to Dento temp.

Marginal Discrepancy of Single Implant-Supported Metal Copings Fabricated by Various CAD/CAM and Conventional Techniques Using Different Materials.

Objective Framework patterns can be formed using various materials such as wax, acrylic resin, or composite. Frameworks can be fabricated using either conventional or computerized techniques, using additive or subtractive method. This study aimed to compare the marginal adaptation of metal copings fabricated by two computerized technologies (milling and rapid prototyping) and additive conventional methods using different materials. Materials and Methods Seventy-two fixture analogs were mounted vertically in acrylic resin. One-piece abutments with 5.5 mm in length and 6 degrees of convergence were secured into the analogs. The experimental frameworks were fabricated using either subtractive CAD/CAM milling (by wax, soft or hard metal), additive rapid prototyping (by wax), or conventional pattern fabrication (by wax [control] or acrylic resin). Wax and acrylic resin patterns were casted in Ni-Cr alloy. Marginal discrepancy was measured in 12 points by video measuring machine. Statistical Analysis One-way ANOVA and posthoc tests were used to detect any significant difference among the groups at α= 0.05. Results There was a statistically significant difference among the marginal discrepancy of six groups ( p = 0.018). The Tukey test indicated a significant difference between CAD/milling of soft metal and conventional wax pattern groups ( p = 0.011); a significant difference was also reported between CAD/milling of wax patterns and control group ( p = 0.046). Conclusions Frameworks fabricated by conventional wax-up showed the largest marginal gaps, while the marginal gap created by frameworks made of soft metal CAD/milling were the smallest. In addition, frameworks fabricated by rapid prototyping showed clinically acceptable adaptations.

The effect of conventional, half-digital, and full-digital fabrication techniques on the retention and apical gap of post and core restorations

Statement of problemConventional cast metal posts and cores are fabricated using direct and indirect techniques, both of which need impression materials and considerable laboratory work. Digital techniques have the capacity to substitute for conventional methods in fabricating the posts and cores. However, the accuracy of restorations resulting from a digital workflow is unknown. PurposeThe purpose of this in vitro study was to compare the retention of posts and cores fabricated using full-digital, half-digital, and conventional techniques and to define the accuracy of each technique in terms of the apical gap. Method and materialsThirty newly extracted mandibular first and second premolar teeth were selected for this in vitro study. Impressions were made using direct acrylic resin patterns (conventional), indirect silicone impressions of the intracanal which scanned with a 3Shape laboratory scanner (half digital), and intracanal scan posts captured with an intraoral 3Shape scanner (full digital). Casting and milling were conducted for the conventional impression and digital scans. The obtained posts were cemented using zinc phosphate cement. A universal pullout test was used to measure retention at a crosshead speed of 0.5 mm/min. The apical gap of each post in the canals was defined with parallel digital radiography. The data were analyzed using the Kruskal-Wallis test (α=.05) and Mann-Whitney test at the adjusted α=.016. ResultsSignificant differences were found among the conventional, full-digital, and half-digital techniques in terms of the apical gap (0.11, 0.29, and 0.66 mm; P<.001) and retention (171.6 ±1.9, 107.1 ±5.6 and 91.8 ±6.6 N; P<.001). The correlation between gap and retention in conventional (P=.43), full-digital (P=.09), and half-digital techniques (P=.06) was not statistically significantly different. ConclusionsThe conventional technique was more accurate and resulted in higher retention than both the full- and half-digital techniques. However, the retention and gap of all the posts fell within clinical guidelines.

Evaluation of Soldered Joints of Two Base Metal Ceramic Alloys: Supercast and Minalux

Background: Different soldering techniques have a variety of applications in dentistry. One of the most important uses of soldering is to join multiple-unit fixed partial dentures together. In this Study, two base metal alloys (Supercast and Minalux) were soldered and their tensile, compressive and flexural strengths were measured and compared to each other. Materials and methods: In this in-vitro study, an aluminum pattern was made by a milling machine according to ASTM (American Society for Testing Material). Eighteen acrylic resin Patterns were duplicated by flasking using putty indices according to the original aluminum pattern. Acrylic resin patterns were divided into two groups of nine and each group was cast with two different alloys named Supercast and Minalux. All eighteen metal rods were separated by 0.008-inch disc and soldered with Vera-solder by means of gas-oxygen torch. Three patterns of each alloy were selected for each of the compression, tensile and flexural tests. Tensile strength was measured by Instron a universal machine and flexural and compression strengths were measured by Dartec machine. Statistical analysis was done by Mann - Whitney test. Results: The mean tensile, flexural and compressive strengths for supercast alloy was 347.6, 44.01 and 1014.8MPa respectively and the mean for tensile, flexural and compressive strengths for Minalux alloy was 350.03, 51.70 and 938.17 MPa respectively. Statistical analysis showed no significant differences between the two alloys in all the three mentioned tests. (p>0.05) Conclusion: Tensile, flexural and compressive strengths of the two soldered alloys, Minalux and supercast, showed no significant differences. Minalux is an alloy manufactured in Iran with the advantage of not including Beryllium, a cariogenic element, as one of the ingredients of the alloy; therefore, it is suggested that Minalux be used instead of supercast in soldering procedures in fixed prosthodontics.

Coronal Microleakage of Teeth Restored with Cast Posts and Cores Cemented with Four Different Luting Agents after Thermocycling.

The apical seal provided by a root canal filling may be breached via coronal leakage. This study aimed to compare the teeth restored with custom-made cast metal posts and cores cemented with different luting agents in terms of coronal microleakage after thermocycling. This in vitro study was conducted on 32 extracted single-canal teeth. Root canals were prepared by step-back technique and filled with gutta percha and sealer. The coronal 7mm of gutta percha was removed, and post space was prepared using peeso reamers #2 and #3 consecutively. After fabricating the acrylic resin patterns of the posts and cores, they were cast using Ni-Cr metal alloy. The specimens were divided into 4 groups in which the castings were cemented using one of the following luting agents: zinc phosphate (ZP), glass ionomer (GI), Panavia F 2.0, and Speed CEM. After cementation, the teeth were immersed in distilled water and incubated for 7days. Then, the teeth were subjected to thermocycling, immersed in silver nitrate for 6hours, and finally sectioned. The degree of dye penetration into the coronal part of the specimens was measured using a stereomicroscope. Data were analyzed using Kruskal-Wallis and Mann-Whitey U tests with significance level of 0.05. The median microleakage in ZP, Speed CEM, GI, and Panavia were 171.89, 114.76, 26.51, and 20.02μm, respectively. Pairwise comparisons among GI and ZP, GI, and Speed CEM, ZP and Panavia, ZP and Speed CEM, and Panavia and Speed CEM groups yielded significant differences (p<0.05). Complete coronal seal was not achieved with any of the luting agents. The highest and the lowest degree of microleakage was yielded by ZP and Panavia luting agents, respectively.

The Effect of Storage Environment on Dimensional Changes of Acrylic Resin Post Patterns

Introduction: The purpose of this study was to compare dimensional changes of two types of auto polymerizing acrylic resin patterns (APARPs) in three different storing environments. Methods: 60 acrylic post and core patterns were made of two types of Duralay acrylic resins (Aria dent, Iran and Reliance, Dental Mfg. Co, USA) using a canine model. Then coronal, apical diameter and coronoapical length of patterns were measured. Afterwards, they were divided into two categories of 30 for each type of Duralay acrylic resin type. Each category was divided into three groups of ten randomly to immerse in three storage environments (Deconex®53plus Borer ChemieAG, Switzerland), Unident ® Impre(USF Healthcare S.A, Sweitzerland) and water. After one hour, three mentioned values were measured again. Data were analyzed by SPSS20 using t-test, paired t-test and ANOVA. Results: Results showed that there were no statistically difference (p value> 0.05) about all dimensions of auto polymerizing acrylic post and core patterns except apical diameter and coronoapical length of Dental Mfg. Co, USA in Deconex®53 plus. Conclusion: The best environment to store Duralay APARPs with minimal changes was water and for disinfection, Deconex®53plus and Unident ® Imprecan showed acceptable properties with both of Duralay types.

Scanning of root canal impression for the fabrication of a resin CAD-CAM-customized post-and-core

Customization of post-and-cores using computer-aided design and computer-aided manufacturing (CAD-CAM) requires the scanning of a pattern and the subsequent digital design. This technique describes a method of fabricating a CAD-CAM-customized post-and-core designed from a scanned polyvinyl siloxane impression and milled from a nanoparticle/nanocluster-filled resin block. The polyvinyl siloxane impression allowed a faster and more efficient customization of the CAD-CAM post-and-core than a conventional acrylic resin pattern. The properties of the nanoparticle/nanocluster filled resin block make the material suitable for chairside CAD-CAM post-and-core fabrication.

A Clinical Comparative Study of 3‐Dimensional Accuracy between Digital and Conventional Implant Impression Techniques

To evaluate the accuracy of a digital implant impression technique using a TRIOS 3Shape intraoral scanner (IOS) compared to conventional implant impression techniques (pick-up and transfer) in clinical situations. Thirty-six patients who had two implants (Implantium, internal connection) ranging in diameter between 3.8 and 4.8 mm in posterior regions participated in this study after signing a consent form. Thirty-six reference models (RM) were fabricated by attaching two impression copings intraorally, splinted with autopolymerizing acrylic resin, verified by sectioning through the middle of the index, and rejoined again with freshly mixed autopolymerizing acrylic resin pattern (Pattern Resin) with the brush bead method. After that, the splinted assemblies were attached to implant analogs (DANSE) and impressed with type III dental stone (Gypsum Microstone) in standard plastic die lock trays. Thirty-six working casts were fabricated for each conventional impression technique (i.e., pick-up and transfer). Thirty-six digital impressions were made with a TRIOS 3Shape IOS. Eight of the digitally scanned files were damaged; 28 digital scan files were retrieved to STL format. A coordinate-measuring machine (CMM) was used to record linear displacement measurements (x, y, and z-coordinates), interimplant distances, and angular displacements for the RMs and conventionally fabricated working casts. CATIA 3D evaluation software was used to assess the digital STL files for the same variables as the CMM measurements. CMM measurements made on the RMs and conventionally fabricated working casts were compared with 3D software measurements made on the digitally scanned files. Data were statistically analyzed using the generalized estimating equation (GEE) with an exchangeable correlation matrix and linear method, followed by the Bonferroni method for pairwise comparisons (α = 0.05). The results showed significant differences between the pick-up and digital groups in all of the measured variables (p < 0.001). Concerning the transfer and digital groups, the results were statistically significant in angular displacement (p < 0.001), distance measurements (p = 0.01), and linear displacement (p = 0.03); however, between the pick-up and transfer groups, there was no statistical significance in all of the measured variables (interimplant distance deviation, linear displacement, and angular displacement deviations). According to the results of this study, the digital implant impression technique had the least accuracy. Based on the study outcomes, distance and angulation errors associated with the intraoral digital implant impressions were too large to fabricate well-fitting restorations for partially edentulous patients. The pick-up implant impression technique was the most accurate, and the transfer technique revealed comparable accuracy to it.

Marginal discrepancy of noble metal-ceramic fixed dental prosthesis frameworks fabricated by conventional and digital technologies

Statement of problemStudies evaluating the marginal adaptation of available computer-aided design and computer-aided manufacturing (CAD-CAM) noble alloys for metal-ceramic prostheses are lacking. PurposeThe purpose of this in vitro study was to evaluate the vertical marginal adaptation of cast, milled, and direct metal laser sintered (DMLS) noble metal-ceramic 3-unit fixed partial denture (FDP) frameworks before and after fit adjustments. Material and methodsTwo typodont teeth were prepared for metal-ceramic FDP abutments. An acrylic resin pattern of the prepared teeth was fabricated and cast in nickel-chromium (Ni-Cr) alloy. Each specimen group (cast, milled, DMLS) was composed of 12 casts made from 12 impressions (n=12). A single design for the FDP substructure was created on a laboratory scanner and used for designing the specimens in the 3 groups. Each specimen was fitted to its corresponding cast by using up to 5 adjustment cycles, and marginal discrepancies were measured on the master Ni-Cr model before and after laboratory fit adjustments. ResultsThe milled and DMLS groups had smaller marginal discrepancy measurements than those of the cast group (P<.001). Significant differences were found in the number of adjustments among the groups, with the milled group requiring the minimum number of adjustments, followed by the DMLS and cast groups (F=30.643, P<.001). ConclusionsMetal–ceramic noble alloy frameworks fabricated by using a CAD-CAM workflow had significantly smaller marginal discrepancies compared with those with a traditional cast workflow, with the milled group demonstrating the best marginal fit among the 3 test groups. Manual refining significantly enhanced the marginal fit of all groups. All 3 groups demonstrated marginal discrepancies within the range of clinical acceptability.

The effect of time and storage environment on dimensional changes of acrylic resin post patterns.

Introduction : Post and core are needed to regain retentions and functions after endodontic therapies. Also, risk of cross contamination from dental prosthesis is so high. The aim of this study was to compare dimensional changes of acrylic resin patterns (ARP) in three different storing environments. Materials and methods : conventional root canal therapy was done on one first premolar tooth and the canal filled with Guttapercha. 2/3 of the filling was expelled and 30 direct APRs were prepared by Duralay. The samples were divided into 3 groups based on storing environments: water, NaOCl 5% and air. Finally dimensional changes in coronoapical length (CAL), coronal (CD) and apical diameter (AD) of APRs were measured in 7 consecutive times (immediately after polymerization, 1, 2, 4, 8, 24, 48 hours later). All the data were analyzed by Paired T-test and Duncon test using SPSS software ver.13 at significant level of 0.05. Results : After 24 hours, the ARPs, which were stored in air, contracted 0.07, 0.06 and 0.12 mm in AD, CD and CAL; the ARPs, which were stored in water, showed 0.03, 0.06 and 0.12 mm decrease in AD, CD and CAL; But the ARPs, which were stored in NaOCl 5%, showed significant expansion in AD, CD and CAL (0.03, 0.06 and 0.10 mm) (all P values < 0.01). Conclusion : It is better not to use NaOCl for disinfecting; also the best time for storing APRs is 8 hours for water and 2 hours for air environments after setting time.

A technique to ensure the reproducibility of a cast post and core

The post-and-core pattern duplication technique is a simple, cost-effective, and accurate method of ensuring the reproducibility of a cast post and core. An acrylic resin pattern is fabricated for an endodontically treated tooth. The post portion of the pattern is duplicated with a polyvinyl siloxane impression material in the lower compartment of a container. The core portion is then duplicated with a polyether impression material in the upper compartment. After the original pattern has been retrieved, the duplicate resin pattern is fabricated in the provided space. This technique will improve efficiency if damage or loss of the pattern or the actual cast post and core occurs.

A technique to remove a fractured acrylic resin pattern from the post space

A post and core is indicated to restore endodontically treated teeth when most tooth structure has been lost. Various techniques for the fabrication of single and multiple post and cores have been described. An acrylic resin pattern for the post is normally fabricated directly in the post space with an autopolymerizing acrylic resin and plastic pin and a brush-on technique. The difficulties of this technique include creating voids in the pattern, locking the pattern into

Improvement to the marginal coping fit of commercially pure titanium cast in phosphate-bonded investment by using a simple pattern coating technique

Coatings of zirconite, Y(2)O(3) or ZrO(2) on wax patterns before investing in phosphate-bonded investments have been recommended to reduce the reaction layer in titanium castings, but they are not easily obtainable. Spinel-based investments are relatively stable with molten titanium and could be used as coatings to improve the quality of castings made with those investments. The purpose of this study was to evaluate the effect of pattern coating with a commercial spinel-based investment before investing in 1 of 3 phosphate-bonded inves tments on the marginal coping fit and surface roughness of commercially pure titanium castings. Ten square acrylic resin patterns (12 × 12 × 2 mm) per group were invested in the phosphate-bonded investments Rematitan Plus (RP), Rema Exakt (RE), and Castorit Super C (CA) with or without a coating of the spinel-based investment, Rematitan Ultra (RU). After casting, the specimens were cleaned and the surface roughness was measured with a profilometer. Copings for dental implants with conical abutment were invested, eliminated, and cast as previously described. The copings were cleaned and misfit was measured with a profile projector (n=10). For both tests, the difference between the mean value of RU only and each value of the phosphate-bonded investment was calculated, and the data were analyzed by 2-way ANOVA and Tukey's HSD test (α=.05). In addition, the investment roughness was measured in bar specimens (30 × 10 × 10 mm), and the data (n=10) were analyzed by 1-way ANOVA and Tukey's HSD post hoc test (α=.05). Two-way ANOVA for casting surface roughness was significant because of the investment, the coating technique, and the interaction between variables. One-way ANOVA was performed to prove the interaction term, and Tukey's post hoc test showed that RP with coating had the lowest mean, while RP had the highest. CA with coating was not different from RP with coating or CA without coating. RE with coating was similar to CA, while RE was different from all groups. For coping marginal fit, the 2-way ANOVA was significant for the investment, the coating technique, and the interaction between variables. The interaction was analyzed by1-way ANOVA and Tukey's HSD test that showed no significant difference among the coated groups, which had better marginal fit than the groups without coating. Among the groups without coating, CA had significant lower marginal misfit than RP, while RE was not different from CA and RP. For the investment surface roughness, the 1-way ANOVA was significant. CA and RU were smoother than RE and RP (P<.001). The coating technique improved the quality of castings fabricated with phosphate-bonded investments.

An accelerated clinical chairside technique for casting overdenture attachment copings

An accelerated technique for casting a direct-pattern post and core restoration for use in fixed prosthodontics has been previously described. Similar techniques for use in removable prosthodontics show potential for clinical use, specifically for the fabrication of radicular stud overdenture attachments and their corresponding copings. The procedure uses a chairside technique and readily available components to fabricate a direct, acrylic resin pattern combining the elements of a cast coping with a fixed radicular attachment. This pattern can subsequently be invested, cast, finished and polished, luted, and attached to the removable prosthesis in a single clinical appointment.

Evaluation of a one-piece milled zirconia post and core with different post-and-core systems: An in vitro study

One-piece milled zirconia posts and cores present an esthetic option as foundation restorations for ceramic crowns. To date, dimensional fit and load capacity of 1-piece zirconia posts and cores have not been determined. The purpose of this study was to evaluate the accuracy of fit of milled zirconia posts and cores and to compare the shear strength with other post-and-core systems. Eighty-five maxillary central incisors and canines received endodontic treatment and were divided into 5 groups (n=17) as follows: cast gold post and core (Au) as control, 1-piece milled zirconia post and core (Zr), prefabricated zirconia post with heat-pressed ceramic core (Zr/Cer), titanium post and composite resin core (Ti), and combined fiber/zirconia post with composite resin core (Fiber/Zr). The posts and cores were cemented with dual-polymerized composite resin cement (Multilink). Zirconia copings were made for each specimen, cemented, and loaded to failure. Fracture loads and modes of failure were recorded. Fracture loads were compared with a linear model. Differences in the mean marginal gap distance between the post-and-core patterns and the adjusted milled zirconia posts and cores were analyzed with a paired t test (alpha=.05). A significant difference was found in the marginal gap distance of group Zr (P<.001), compared with the marginal gap distance of the acrylic resin patterns. Mean loads to failure were highest for the Fiber/Zr group in comparison with custom-made milled zirconia posts and cores (P<.001). All systems evaluated presented sufficient mean load-to-failure values for anterior tooth restorations, including the recently developed 1-piece milled zirconia post and core.

Tensile bond strength of cast commercially pure titanium dowel and cores cemented with three luting agents

The purpose of this study was to compare the tensile strength of commercially pure titanium dowels and cores cemented with zinc phosphate or resin cements. Twenty-one extracted human canines were endodontically treated. The root preparations were accomplished using Largo reamers (10mm in depth and 1.7 mm in diameter). Acrylic resin patterns for the dowel and cores were made, and specimens were cast in commercially pure titanium (n=7) and divided in three groups: TZ-CP Ti dowels luted with zinc phosphate luting agent, TP-CP Ti dowels luted with Panavia F and TR-CP Ti dowels luted with RelyX U100. Tensile strengths were measured in a universal testing machine at a crosshead speed of 0.5mm/min. The results (N) were statistically analyzed by ANOVA and Tukey tests (α=0.01). The ANOVA indicated that there were significant differences among the groups tested. A Tukey multiple comparison procedure was performed and revealed statistically significant higher retention values for the dowel luted with RelyX U100 when compared with zinc phosphate or Panavia F. Cast commercially pure titanium dowels and cores fixed with RelyX U100 cement presented superior bond strength retention when compared to zinc phosphate and Panavia F.

Effect of casting atmosphere on the shear bond strength of a ceramic to Ni-Cr and Ni-Cr-Be alloys

The success of metal-ceramic restorations depends on an optimal bond between metal and ceramic. This study evaluated the effect of 3 casting atmospheres on the metal-ceramic bond strength (MCBS) of 2 Ni-Cr alloys, with beryllium (Fit Cast V) and without beryllium (Fit Cast SB). Sixty acrylic resin patterns (8 mm long and 5 mm diameter) were obtained using a fluorocarbon resin matrix. Wax was used to refine the surface of acrylic resin patterns that were invested and cast in an induction casting machine under normal, vacuum, and argon atmospheres at a temperature of 1340 degrees C. The castings were divested manually and airborne-particle abraded with 100-microm aluminum-oxide. Ten castings were obtained for each group. The IPS Classic V ceramic was applied (2 mm high and 5 mm diameter). The shear bond strength was tested in a mechanical testing machine with a crosshead speed of 2.0 mm/min. The MCBS data (MPa) were subjected to 2-way analysis of variance (alpha=0.05). There was no statistically significant difference (p>0.05) between the alloys or among the casting atmospheres. Within the limitations of this study, it may be concluded that the presence of beryllium and the casting atmosphere did not interfere in the MCBS of the evaluated metal-ceramic combinations.

Tensile bond strength of cast commercially pure titanium and cast gold-alloy posts and cores cemented with two luting agents

In vitro studies on the retentive strengths of various cements used to retain posts have reported conflicting results. The purpose of this study was to compare the tensile strength of commercially pure titanium and type III cast gold-alloy posts and cores cemented with zinc phosphate or resin cement. Forty-two extracted human canines were endodontically treated. The root preparations were accomplished using Largo reamers (10 mm in depth and 1.7 mm in diameter). Acrylic resin patterns for the posts and cores were made, and specimens were cast in commercially pure titanium and in type III gold alloy (n=7). Fourteen titanium cast posts and cores were submitted to surface treatment with Kroll acid solution and to scanning electron microscopy (SEM), before and after acid etching. The groups (n=7) were cemented with zinc phosphate cement or resin cement (Panavia F). Tensile strengths were measured in a universal testing machine at a crosshead speed of 0.5 mm/min. The results (Kgf) were statistically analyzed by 2-way ANOVA (alpha=.05). The 2-way ANOVA indicated that there were no significant differences among the groups tested. Retentive means for zinc phosphate and Panavia F cements were statistically similar. The bond strength was not influenced by the alloy, the luting material, or the etching treatment. SEM analysis indicated that the etched surfaces were smoother than those that did not receive surface treatment, but this fact did not influence the results. Commercially pure titanium cast posts and cores cemented with zinc phosphate and resin cements demonstrated similar mean tensile retentive values. Retentive values were also similar to mean values recorded for cast gold-alloy posts and cores cemented with zinc phosphate cement and resin cements.