acpcPNA Probes Research Articles

Label free electrochemical DNA biosensor for COVID-19 diagnosis

The COVID-19 pandemic has significantly increased the development of the development of point-of-care (POC) diagnostic tools because they can serve as useful tools for detecting and controlling spread of the disease. Most current methods require sophisticated laboratory instruments and specialists to provide reliable, cost-effective, specific, and sensitive POC testing for COVID-19 diagnosis. Here, a smartphone-assisted Sensit Smart potentiostat (PalmSens) was integrated with a paper-based electrochemical sensor to detect severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). A disposable paper-based device was fabricated, and the working electrode directly modified with a pyrrolidinyl peptide nucleic acid (acpcPNA) as the biological recognition element to capture the target complementary DNA (cDNA). In the presence of the target cDNA, hybridization with acpcPNA probe blocks the redox conversion of a redox reporter, leading to a decrease in electrochemical response correlating to SARS-CoV-2 concentration. Under optimal conditions, a linear range from 0.1 to 200 nM and a detection limit of 1.0 pM were obtained. The PNA-based electrochemical paper-based analytical device (PNA-based ePAD) offers high specificity toward SARS-CoV-2 N gene because of the highly selective PNA-DNA binding. The developed sensor was used for amplification-free SARS-CoV-2 detection in 10 nasopharyngeal swab samples (7 SARS-CoV-2 positive and 3 SARS-CoV-2 negative), giving a 100% agreement result with RT-PCR.

Fluorescent paper-based DNA sensor using pyrrolidinyl peptide nucleic acids for hepatitis C virus detection

A novel fluorescent paper-based DNA sensor employing a highly specific pyrrolidinyl peptide nucleic acid (acpcPNA) probe was developed for the sensitive and selective detection of hepatitis C virus (HCV). The acpcPNA was covalently immobilized onto partially oxidized cellulose paper via reductive alkylation between the amine and the aldehyde groups. The fluorescence-based detection was performed by monitoring the fluorescence signal response of a fluorescent dye that selectively binds to the single-strand region of the DNA target over the PNA probe employing a custom-made portable fluorescent camera gadget in combination with a smartphone camera. Under the optimal conditions, a linear relationship between the fluorescence change in the green channel and the amount of HCV DNA from 5 to 100 pmol with a correlation coefficient of 0.9956, and the limit of detection of 5 pmol were obtained for short synthetic oligonucleotides. The acpcPNA probe exhibited very high selectivity for the complementary oligonucleotides over the single-base-mismatched, two-base-mismatched, and non-complementary DNA targets. Benefitting from the signal amplification achieved through the numerous binding sites for the dye provided by the overhanging tail of long ssDNA target sequences, this system was successfully applied to detect the HCV complementary DNA (cDNA) obtained from clinical samples with satisfactory results. The proposed fluorescent paper-based sensor demonstrated a great potential to be used as a low-cost, simple, label-free, sensitive, and selective DNA sensor for point-of-care applications.

Chemical binding of pyrrolidinyl peptide nucleic acid (acpcPNA-T9) probe with AuNPs toward label-free monitoring of miRNA-21: A novel biosensing platform for biomedical analysis and POC diagnostics.

miRNAs are attractive factors in cancer research studies due to their important roles for regulating of gene expression. Because of miRNA-21 expression surplus in many types of cancers, so accurate identification is important. Increasing efforts have caused different methods to improve the sensitivity and specificity of detection. Present study is an attempt to report a new electrochemical label-free PNA-based bioassay for detection of miRNA-21. In this study, gold electrode was modified by gold nanoparticles to improve a functional PNA-based biosensor. The EDS and field emission scanning electron microscope (FE-SEM) were used to detect fabrication of biosensor. The electrochemical behavior of sensor was evaluated after inserting of acpcPNA probes and miRNA-21 on the stucture of electrode and analyzed essential parameters such as various concentration of target miRNA, hybridization time, reproducibility, stability, and applicability. The results of study demonstrated that engineered biosensor was successfully fabricated. The findings showed the highest amount of current in 5 minutes hybridization time, with suitable reproducibility and stability. This innovative miRNA-based biosensor presents a sensitive and specific method in fast and may be lab-on chip assay in future.

Electrochemical impedance-based DNA sensor using pyrrolidinyl peptide nucleic acids for tuberculosis detection

A label-free electrochemical DNA sensor based on pyrrolidinyl peptide nucleic acid (acpcPNA)-immobilized on a paper-based analytical device (PAD) was developed. Unlike previous PNA-based electrochemical PAD (ePAD) sensors where the capture element was placed directly on the electrode, acpcPNA was covalently immobilized onto partially oxidized cellulose paper allowing regeneration by simple PAD replacement. As an example application, a sensor probe was designed for Mycobacterium tuberculosis (MTB) detection. The ePAD DNA sensor was used to determine a synthetic 15-base oligonucleotide of MTB by measuring the fractional change in the charge transfer resistance (Rct) obtained from electrochemical impedance spectroscopy (EIS). The Rct of [Fe(CN)6]3-/4- before and after hybridization with the target DNA could be clearly distinguished. Cyclic voltammetry (CV) was used to verify the EIS results, and showed an increase in peak potential splitting in a similar stepwise manner for each immobilization step. Under optimal conditions, a linear calibration curve in the range of 2–200 nM and the limit of detection 1.24 nM were measured. The acpcPNA probe exhibited very high selectivity for complementary oligonucleotides over single-base-mismatch, two-base-mismatch and non-complementary DNA targets due to the conformationally constrained structure of the acpcPNA. Moreover, the ePAD DNA sensor platform was successfully applied to detect PCR-amplified MTB DNA extracted from clinical samples. The proposed paper-based electrochemical DNA sensor has potential to be an alternative device for low-cost, simple, label-free, sensitive and selective DNA sensor.

Multiplex Paper-Based Colorimetric DNA Sensor Using Pyrrolidinyl Peptide Nucleic Acid-Induced AgNPs Aggregation for Detecting MERS-CoV, MTB, and HPV Oligonucleotides.

The development of simple fluorescent and colorimetric assays that enable point-of-care DNA and RNA detection has been a topic of significant research because of the utility of such assays in resource limited settings. The most common motifs utilize hybridization to a complementary detection strand coupled with a sensitive reporter molecule. Here, a paper-based colorimetric assay for DNA detection based on pyrrolidinyl peptide nucleic acid (acpcPNA)-induced nanoparticle aggregation is reported as an alternative to traditional colorimetric approaches. PNA probes are an attractive alternative to DNA and RNA probes because they are chemically and biologically stable, easily synthesized, and hybridize efficiently with the complementary DNA strands. The acpcPNA probe contains a single positive charge from the lysine at C-terminus and causes aggregation of citrate anion-stabilized silver nanoparticles (AgNPs) in the absence of complementary DNA. In the presence of target DNA, formation of the anionic DNA-acpcPNA duplex results in dispersion of the AgNPs as a result of electrostatic repulsion, giving rise to a detectable color change. Factors affecting the sensitivity and selectivity of this assay were investigated, including ionic strength, AgNP concentration, PNA concentration, and DNA strand mismatches. The method was used for screening of synthetic Middle East respiratory syndrome coronavirus (MERS-CoV), Mycobacterium tuberculosis (MTB), and human papillomavirus (HPV) DNA based on a colorimetric paper-based analytical device developed using the aforementioned principle. The oligonucleotide targets were detected by measuring the color change of AgNPs, giving detection limits of 1.53 (MERS-CoV), 1.27 (MTB), and 1.03 nM (HPV). The acpcPNA probe exhibited high selectivity for the complementary oligonucleotides over single-base-mismatch, two-base-mismatch, and noncomplementary DNA targets. The proposed paper-based colorimetric DNA sensor has potential to be an alternative approach for simple, rapid, sensitive, and selective DNA detection.

Enhancing capacitive DNA biosensor performance by target overhang with application on screening test of HLA-B*58:01 and HLA-B*57:01 genes

A highly sensitive label-free DNA biosensor based on PNA probes immobilized on a gold electrode was used to detect a hybridization event. The effect of a target DNA overhang on the hybridization efficiency was shown to enhance the detected signal and allowed detection at a very low concentration. The sensors performances were investigated with a complementary target that had the same length as the probe, and the signal was compared to the target DNAs with different lengths and overhangs. A longer target DNA overhang was found to provide a better response. When the overhang was on the electrode side the signal enhancement was greater than when the overhang was on the solution side due to the increased thickness of the sensing surface, hence produced a larger capacitance change. Using conformationally constrained acpcPNA probes, double stranded DNA was detected sensitively and specifically without any denaturing step. When two acpcPNA probes were applied for the screening test for the double stranded HLA-B*58:01 and HLA-B*57:01 genes that are highly similar, the method differentiated the two genes in all samples. Both purified and unpurified PCR products gave comparable results. This method would be potentially useful as a rapid screening test without the need for purification and denaturation of the PCR products.

Electrochemical detection of human papillomavirus DNA type 16 using a pyrrolidinyl peptide nucleic acid probe immobilized on screen-printed carbon electrodes

An electrochemical biosensor based on an immobilized anthraquinone-labeled pyrrolidinyl peptide nucleic acid (acpcPNA) probe was successfully developed for the selective detection of human papillomavirus (HPV) type 16 DNA. A 14-mer acpcPNA capture probe was designed to recognize a specific 14 nucleotide region of HPV type 16 L1 gene. The redox-active label anthraquinone (AQ) was covalently attached to the N-terminus of the acpcPNA probe through an amide bond. The probe was immobilized onto a chitosan-modified disposable screen-printed carbon electrode via a C-terminal lysine residue using glutaraldehyde as a cross-linking agent. Hybridization with the target DNA was studied by measuring the electrochemical signal response of the AQ label using square-wave voltammetric analysis. The calibration curve exhibited a linear range between 0.02 and 12.0µM with a limit of detection and limit of quantitation of 4 and 14nM, respectively. This DNA sensing platform was successfully applied to detect the HPV type 16 DNA from a PCR amplified (240bp fragment of the L1 gene) sample derived from the HPV type 16 positive human cancer cell line (SiHa), and failed to detect the HPV-negative c33a cell line. The sensor probe exhibited very high selectivity for the complementary 14 base oligonucleotide over the non-complementary oligonucleotides with sequences derived from HPV types 18, 31 and 33. The proposed sensor provides an inexpensive tool for the early stage detection of HPV type 16, which is an important biomarker for cervical cancer.

Anion-exchanged nanosolid support of magnetic nanoparticle in combination with PNA probes for DNA sequence analysis

Poly((2-diethylamino)ethyl methacrylate) (poly(DEAEMA))-grafted magnetite nanoparticle (MNP) with a positively charged surface was used as an anion exchanger for detection of deoxyribonucleic acid (DNA) sequences by employing peptide nucleic acid (PNA) as a probe. The cationic MNP with a size ranging between 6 and 10 nm in diameter can electrostatically adsorb DNA with a capacity of 171 nmol nucleotide/g MNP. The electrostatically neutral pyrrolidinyl PNA-bearing prolyl-2-aminocyclopentane carboxylic acid backbone (acpcPNA) can be adsorbed by the cationic MNP only when the sequence of the PNA and DNA is complementary, and the presence of adsorbed PNA could be examined by matrix-assisted laser desorption ionization time-of-flight mass spectrometry. Two DNA sequences, the sequence stimulating Kirsten Rat Sarcoma (K-ras) gene and the sequence having 5′ methylated CpG site, were used in this study. It was found that the particles can be used as nanosolid support to differentiate between complementary and single-base mismatched DNA sequences using both single and two acpcPNA probes. This polymer-grafted MNP might be applicable for use as a magnetically guidable tool for detection of real DNA samples in the future.

Dual pyrene-labeled pyrrolidinyl peptide nucleic acid as an excimer-to-monomer switching probe for DNA sequence detection

The unique ability of pyrene to form excimers with distinct emission characteristic from monomer offers an attractive means to signal the interactions between biomolecules. In this work, dual pyrene-labeled pyrrolidinyl peptide nucleic acid probe with a d-prolyl-2-aminocyclopetanecarboxylic acid α,β-dipeptide backbone (acpcPNA) was designed as an excimer-to-monomer switching probe for DNA sequence detection. In single stranded state, the excimer emission at 470 nm was mainly observed in the fluorescence spectrum. In the presence of DNA target, the hybridization resulted in separation of the two pyrene units, therefore the spectrum displayed increased monomer emission at 380 nm with concomitant decreased excimer emission. Switching ratio, which is defined as the ratio of the monomer to excimer in the double stranded form [F380/F470(ds)] divided by the same value obtained from the single stranded form [F380/F470(ss)], was used to describe the performance of the probes. Switching ratios in the range of 5–30 were observed with various dual pyrene-labeled acpcPNA probes bearing pyrenebutyryl label attached five-base apart. Practically no excimer-to-monomer switching behavior was observed with DNA targets carrying a single mismatched base as shown by the small switching ratios of ∼1.

Reductive Alkylation and Sequential Reductive Alkylation-Click Chemistry for On-Solid-Support Modification of Pyrrolidinyl Peptide Nucleic Acid

A methodology for the site-specific attachment of fluorophores to the backbone of pyrrolidinyl peptide nucleic acids (PNAs) with an α/β-backbone derived from D-prolyl-(1S,2S)-2-aminocyclopentanecarboxylic acid (acpcPNA) has been developed. The strategy involves a postsynthetic reductive alkylation of the aldehyde-containing labels onto the acpcPNA that was previously modified with (3R,4S)-3-aminopyrrolidine-4-carboxylic acid on the solid support. The reductive alkylation reaction is remarkably efficient and compatible with a range of reactive functional groups including Fmoc-protected amino, azide, and alkynes. This allows further attachment of readily accessible carboxyl-, alkyne-, or azide-containing labels via amide bond formation or Cu-catalyzed azide-alkyne cycloaddition (CuAAC, also known as click chemistry). The label attached in this way does not negatively affect the affinity and specificity of the pairing of the acpcPNA to its DNA target. Applications of this methodology in creating self-reporting pyrene- and thiazole orange-labeled acpcPNA probes that can yield a change in fluorescence in response to the presence of the correct DNA target have also been explored. A strong fluorescence enhancement was observed with thiazole orange-labeled acpcPNA in the presence of DNA. The specificity could be further improved by enzymatic digestion with S1 nuclease, providing a 9- to 60-fold fluorescence enhancement with fully complementary DNA and a less than 3.5-fold enhancement with mismatched DNA targets.

Magnetite Nanoparticle with Positively Charged Surface for Immobilization of Peptide Nucleic Acid and Deoxyribonucleic Acid

We herein report the surface modification of magnetite nanoparticle (MNP) with the (co)polymer of poly(ethylene glycol) methyl ether methacrylate (PEGMA) and/or diethylamino ethyl methacrylate (DEAEMA) via atom transfer radical polymerization (ATRP) for use as anion exchanger solid support for detection of DNA sequence using peptide nucleic acid (PNA) probe. Molar ratio of the PEGMA:DEAEMA (co)polymer was systematically varied to tune the positive charges on the particle surface. Kinetic studies of the (co)polymerizations were investigated via 1HNMR to disclose the relative reactivity of the (co)polymers in the reaction. Zeta potential of the (co)polymer-grafted MNP was analyzed by photo correlation spectroscopy (PCS). Transmission electron microscopy (TEM) and PCS indicated an improvement in the particle dispersibility in water upon quaternization of the DEAEMA entities grafted on the particle surface. From the preliminary results, these (co)polymer-grafted MNPs can be used as a nanosolid support to differentiate between full match and single-base mismatch DNA sequences using an acpcPNA probe. These novel cationic MNPs might be efficiently applicable for use as a magnetically guidable tool for detection of DNA sequences.

A comparative study of a label-free DNA capacitive sensor using a pyrrolidinyl peptide nucleic acid probe immobilized through polyphenylenediamine and polytyramine non-conducting polymers

This work has, for the first time, reported a comparative study on the performances of a label-free capacitive DNA sensor based on an immobilized pyrrolidinyl peptide nucleic acid with a d-prolyl-2-aminocyclopentanecarboxylic acid backbone (acpcPNA) attached to three easy to prepare non-conducting polymers. Two phenylenediamine (PD) isomers (ortho- and para-) and one tyramine monomer were electropolymerized to form polymer films. The hybridization between the acpcPNA probes, immobilized on the polymer layer, and the target DNA was detected directly by measuring the capacitance change. Using the optimal electropolymerized conditions, the highest sensitivity of 20.9 ± 0.6-nF cm−2 (log M)−1 was obtained from poly-para-PD (PpPD) with a lowest detection limit of 0.2 pM. A wide linear range, 1.0 × 10−12 to 1.0 × 10−8 M, was obtained for both the PpPD and polytyramine (Pty). A narrower linear range of 1.0 × 10−11 to 1.0 × 10−8 M was obtained from the poly-ortho-PD (PoPD). The surface morphology was observed using scanning electron microscopy and atomic force microscopy. The polymer with the better surface morphology, i.e., smoother, denser and more homogeneous was the one with more immobilized probes and a better overall performance. All modified polymers gave a high % signal suppression (%SS) for both the single and double mismatched target DNAs, and indicated its high specificity. The electrodes can be reused for at least 68 analytical cycles. The effects of the target length and probe concentrations were also investigated. Under the operating conditions of this work the system would be very useful for the cost-effective analysis of ultra-trace levels of DNA in samples.

Label-free capacitive DNA sensor using immobilized pyrrolidinyl PNA probe: Effect of the length and terminating head group of the blocking thiols

This paper reports, for the first time, the influence of the length and the terminating head group of blocking thiols on the sensitivity and specificity of a label-free capacitive DNA detection system using immobilized pyrrolidinyl peptide nucleic acid (acpcPNA) probes. A C-terminal lysine-modified acpcPNA was immobilized through four different alkanethiol self-assembled monolayers (SAMs), i.e., 3-mercaptopropionic acid (MPA), thioctic acid (TA), thiourea (TU) and mercaptosuccinic acid (MSA). The hybridization between the acpcPNA probes and the target DNA was directly measured using the capacitive system. Five blocking thiols of various lengths (C=3, 6, 8, 9 and 11), with the –OH terminating head group, i.e., 3-mercapto-1-propanol (3-MPL), 6-mercapto-1-hexanol (6-MHL), 8-mercapto-1-octanol (8-MOL), 9-mercapto-1-nonanol (9-MNL), 11-mercapto-1-undecanol (11-MUL) and another blocking thiol (C=11) with a –CH3 terminating head group, and 1-dodecanethiol (1-DDT) were investigated. The blocking thiol with the same length as the total spacer of the immobilized acpcPNA gave the highest sensitivity and specificity with the –OH terminating head group providing a slightly better signal than the –CH3 group. Under the optimized conditions, the immobilized acpcPNA probes provided a wide linear range for DNA detection (1.0×10–11–1.0×10−8M) with a very low detection limit in the picomolar range. The modified acpcPNA electrode could be reused through at least 58 cycles. The high sensitivity and very low detection limits are potentially useful for the analysis of ultra-trace levels of DNA in samples. Preliminary studies were also performed to see the effect of probe concentration and target length.

Comparison of DNA, aminoethylglycyl PNA and pyrrolidinyl PNA as probes for detection of DNA hybridization using surface plasmon resonance technique

Pyrrolidinyl peptide nucleic acid bearing a d-prolyl-2-aminocyclopentanecarboxylic acid backbone (acpcPNA) has been evaluated as a new sensing probe for detection of DNA hybridization. In this study, the biotinylated acpcPNA was immobilized on surface plasmon resonance (SPR) sensor chips via biotin–streptavidin interactions for solid-phase DNA hybridization. A critical comparison between acpcPNA, DNA and conventional peptide nucleic acid (aegPNA) probes of the same sequence was made by means of SPR on various important aspects. These include the effect of ionic strength on hybridization efficiency, the specificity to detect the mismatch(es) in target DNAs, the direction of binding (parallel or antiparallel) to target DNAs, and the effect of target DNA concentration on hybridization efficiency. Results indicated that the immobilized acpcPNA probe possesses distinct hybridization properties relative to aegPNA (and/or DNA) counterparts, including a higher single-base mismatch sensitivity, antiparallel selectivity and low ionic strength dependence of target hybridization. These properties substantiate the acpcPNA applicability as sensor probes for clinical and diagnostic applications. With a proper selection of regeneration conditions (10 mM NaOH, 2 min exposure), the sensor can be reused for multiple cycles of hybridization with as little as 1.3% loss in hybridization activity per regeneration cycle.