Acid Head Groups Research Articles

Modeling compound lipid homeostasis using stable isotope tracing.

Lipids represent the most diverse pool of metabolites found in cells, facilitating compartmentation, signaling, and other functions. Dysregulation of lipid metabolism is linked to disease states such as cancer and neurodegeneration. However, limited tools are available for quantifying metabolic fluxes across the lipidome. To directly measure reaction fluxes encompassing compound lipid homeostasis, we applied stable isotope tracing, high-resolution mass spectrometry, and network-based isotopologue modeling to non-small cell lung cancer (NSCLC) models. Compound lipid metabolic flux analysis (CL-MFA) enables the concurrent quantitation of fatty acid synthesis, elongation, headgroup assembly, and salvage reactions within virtually any biological system. Here, we resolve liver kinase B1 (LKB1)-mediated regulation of sphingolipid recycling in NSCLC cells and precision-cut lung slice cultures. We also demonstrate that widely used tissue culture conditions drive cells to upregulate fatty acid synthase flux to supraphysiological levels. Finally, we identify previously uncharacterized isozyme specificity of ceramide synthase inhibitors, highlighting the molecular detail revealed by CL-MFA.

The effect of perfluoroalkyl chain length and the type of acid group on PFAS adsorption from water

Widespread use of per- and polyfluoroalkyl substances (PFAS) poses significant ecological and health risks due to their non-degradability in the environment and consequent bioaccumulation in humans. In this work, we carried out a systematic computational study to unravel the effect of perfluorinated carbon chain length and the type of acid head group on the adsorption mechanism of PFAS from water. We considered the adsorption of perfluoroalkyl carboxylic acids (PFCA) and perfluoroalkyl sulfonic acids (PFSA) with chain lengths of three to eight perfluorinated carbons in hydrophobic all-silica zeolite Beta. Molecular dynamics (MD) simulations coupled with enhanced sampling calculations showed that adsorption free energies of both PFCA and PFSA decreased with increasing number of perfluorinated carbons. Calculated free energies further showed that PFCA and PFSA, which are anions in water, must overcome substantially large interfacial energy barriers to be adsorbed in hydrophobic pores. Subsequent ab initio MD simulations revealed that PFCA and PFSA gain a proton at the water–zeolite interface and are eventually adsorbed in neutral form. Breakdown of guest–host interaction energies into hydrophobic and polar components showed that hydrophobic interactions dominate PFCA adsorption whereas polar interactions are dominant in PFSA adsorption. This is due to sulfonic acid giving rise to stronger electrostatic interactions and the rearrangement of the electron density distribution in the perfluorinated carbon chain, which render the hydrophobic interactions relatively weaker. Our study reveals that a combination of adsorbents that provide optimized hydrophobic and polar interactions should be used for the capture of diverse PFAS from water.

Adsorption of per- and polyfluoroalkyl substances on biochar derived from municipal sewage sludge

Granular activated carbon (GAC) and ion exchange resin (IXR) are widely used as adsorbents to remove PFAS from drinking water sources and effluent waste streams. However, the high cost associated with GAC and IXR generation has motivated the development of less expensive adsorbents for treatment of PFAS-impacted water. Thus, the objective of this research was to create an economically viable and sustainable PFAS adsorbent from sewage sludge. Stepwise pyrolysis at temperatures from 300 °C to 1000 °C yielded biochars whose specific surface area (SSA) and porosity increased from 41 to 148 m2/g, and from 0.062 to 0.193 cm3/g, respectively. On a per organic char basis, the SSA of the biochar was as high as 1183 m2/g, which is comparable to commercially-available activated carbons. The adsorption of perfluorooctane sulfonic acid (PFOS) on sludge biochar increased with increasing pyrolysis temperature, which was positively correlated with increasing porosity and SSA. When 1000 °C processed biochar was tested with a mixture of eight PFAS, preferential adsorption of longer carbon chain-length species was observed, indicating the importance of PFAS hydrophobic interactions with the biochar and the availability of a wide range of mesopores. The adsorption of each PFAS was dependent upon both chain length and head group, with longer chain-length species exhibiting greater adsorption than shorter chain-length species, along with greater adsorption of species with sulfonic acid head groups compared to their chain length counterparts with carboxylic acid head groups. These findings demonstrate that biochar derived from municipal solid waste can serve as a cost-effective and sustainable adsorbent for the removal of PFOS and PFAS mixtures from source waters. The circular economy benefits and waste reduction potential associated with the use of sewage sludge-derived biochar supports the development of a viable sludge-derived biochar for the removal of PFAS from water.

Influence of phospholipid structures on volatile organic compounds generation in model systems

To investigate the regularities and differences in oxidation products of phosphatidylcholine (PC) and phosphatidylethanolamine (PE) by gas chromatography-mass spectrometry (GC–MS), and examine the influence of variations in fatty acid compositions and head groups on the kinds and contents of volatile organic compounds (VOCs) generated. A total of 42 VOCs were identified from PE (16:0–18:2), PC (16:0–18:2), and PC (16:0–18:1), with aldehydes and ketones being the main VOCs in three phospholipids (PLs). The content of most VOCs produced by PE (16:0–18:2), PC (16:0–18:2), and PC (16:0–18:1) increases with the increase of oxidation temperature and time. Reached peak at 175 °C for 60 min. The total VOCs contents generated by PE (16:0–18:2) and PC (16:0–18:2) were higher than those produced by PC (16:0–18:1), with PC (16:0–18:2) showing the highest total VOCs contents. PLs exhibited three mass loss processes with increasing temperature, namely stability, reduction, and stabilization. PC (16:0–18:2) experienced the highest mass loss, followed by PE (16:0–18:2), while PC (16:0–18:1) showed the least mass loss. These findings showed that polyunsaturated fatty acids were more susceptible to oxidation and degradation during oxidation, and the presence of choline groups in the form of PE may enhance the oxidative stability of fatty acyl groups compared to PC.

Structural investigation of the complexation between vitamin B12 and per- and polyfluoroalkyl substances: Insights into degradation using density functional theory

Environmental remediation of per- and polyfluoroalkyl substances (PFAS) has become a significant research topic in recent years due to the fact that these materials are omnipresent, resistant to degradation and thus environmentally persistent. Unfortunately, they have also been shown to cause health concerns. PFAS are widely used in industrial applications and consumer products. Vitamin B12 (B12) has been identified as being catalytically active towards a variety of halogenated compounds such as PFAS. It has also been shown to be effective when using sulfide as a reducing agent for B12. This is promising as sulfide is readily available in the environment. However, there are many unknowns with respect to PFAS interactions with B12. These include the reaction mechanism and B12's specificity for PFAS with certain functionalization(s). In order to understand the specificity of B12 towards branched PFAS, we examined the atomistic interactions between B12 and eight different PFAS molecules using Density Functional Theory (B3LYP/cc-pVDZ). The PFAS test set included linear PFAS and their branched analogs, carboxylic acid and sulfonic acid headgroups, and aromatic and non-aromatic cyclic structures. Conformational analyses were carried out to determine the lowest energy configurations. This analysis showed that small chain PFAS such as perfluorobutanoic acid interact with the cobalt center of B12. Bulkier PFAS prefer to interact with the amine and carbonyl groups on the sidechains of the B12 ring system. Furthermore, computed complexation energies determined that, in general, branched PFAS (e.g. perfluoro-5-methylheptane sulfonic acid) interact more strongly than linear molecules (e.g. perfluorooctanesulfonic acid). Our results indicate that it may be possible to alter the interactions between B12 and PFAS by synthetically modifying the sidechains of the ring structure.

(Invited) Molecular Insights into Water Structure and Proton Transfer at the Interfaces in Bipolar AEM/PEM Membranes

Bipolar membranes (BPMs) are polymeric membranes composed of an acidic proton exchange membrane (PEM) and an alkaline anion exchange membrane (AEM). Bipolar membranes are operated in two different configurations, forward bias and reverse bias, based on the orientation of membranes and electrodes, when the cathode faces the PEM, it is operated in a reverse bias configuration. In reverse bias BPMs facilitates the dissociation of water at the interface of its junction. This unique feature makes it attractive to many industrial applications, including chemical industries, energy conversion and storage, environmental protection, and food processing. It was determined that the rate of water dissociation at the interface of a bipolar membrane increases with the addition of a weak acidic head group material, which acts as the catalyst for the water dissociation reaction and thus referred as the catalyst layer. BPMs have a better ion transport framework because of the amphiphilic nature of all three layers, resulting in well-connected water channels. Hence it is crucial to understand the interaction of water molecules with the functional groups at the molecular level and the morphology at mesoscale to understand the water aggregation and phase separation which helps in the asymmetric transport of proton and hydroxide ions through PEM and AEM respectively.This talk will communicate our efforts to undertake a multiscale approach involving both electronic structure calculations and mesoscale simulations to elucidate: (1) water interaction of water with the headgroups; proton transfer, and (2) connectivity of a TMA AEM, a PFSA PEM, and a phosphonic acid-based catalyst.

Coupled Simulation of Chemical Membrane Degradation and Oxygen Crossover in PEM Water Electrolysis

The membrane of polymer electrolyte membrane water electrolysis (PEMWE), as one of the lifetime limiting components, does not only have an impact on performance, but also plays an important role for safety issues over time. Membrane thinning is a key phenomenon caused by chemical membrane degradation and directly affects the conductivity and gas crossover. Therefore, a chemical membrane degradation model based on Fenton equations [1,2] coupled with a gas crossover model [3] is presented in this work. The presence of Oxygen at cathode side is considered by oxygen crossover, which is strongly enforced by supersaturation effects. Specifically, this cathode-side oxygen is conducive to hydrogen peroxide formation. In interaction with metal ions, e.g. iron, from the feed water, which partially migrate through the membrane, hydroxyl radicals can be formed. These attack the polyfluorinated sulfonicacid (PFSA) membrane at different points, releasing sulfon acid head groups (SO3H-) and fluride ions (F-), which can be measured as sulfur release rates (SRR) and fluride release rates (FRR) in the effluent water, respectively. The degradation model provides concentration profiles for the relevant species involved in the process, which, e.g., influence the thickness and conductivity of the membrane via structure-function relations. In particular, the changed thickness again influences the crossover effect, which itself represents an input for the degradation model. Through this coupling, both models can be updated at specific times. Implications of the model-based analysis on the mechanistic understanding of chemical membrane degradation by radical attack in PEMWE are discussed. Furthermore, the model results can be verified and calibrated by experimental data in combination with adapted accelerated stress tests (AST) and also encourage their enhancement.

Calcite Surfaces Modified with Carboxylic Acids (C2 to C18): Layer Organization, Wettability, Stability, and Molecular Structural Properties.

A fundamental understanding of the interactions between mineral surfaces and amphiphilic surface modification agents is needed for better control over the production and uses of mineral fillers. Here, we controlled the carboxylic acid layer formation conditions on calcite surfaces with high precision via vapor deposition. The properties of the resulting carboxylic acid layers were analyzed using surface-sensitive techniques, such as atomic force microscopy (AFM), contact angle measurements, angle resolved X-ray photoelectron spectroscopy (XPS), and vibrational sum-frequency spectroscopy. A low wettability was achieved with long hydrocarbon chain carboxylic acids such as stearic acid. The stearic acid layer formed by vapor deposition is initially patchy, but with increasing vapor exposure time, the patches grow and condense into a homogeneous layer with a thickness close to that expected for a monolayer as evaluated by AFM and XPS. The build-up process of the layer occurs more rapidly at higher temperatures due to the higher vapor pressure. The stability of the deposited fatty acid layer in the presence of a water droplet increases with the chain length and packing density in the adsorbed layer. Vibrational sum frequency spectroscopy data demonstrate that the stearic acid monolayers on calcite have their alkyl chains in an all-trans conformation and are anisotropically distributed on the plane of the surface, forming epitaxial monolayers. Vibrational spectra also show that the stearic acid molecules interact with the calcite surface through the carboxylic acid headgroup in both its protonated and deprotonated forms. The results presented provide new molecular insights into the properties of adsorbed carboxylic acid layers on calcite.

Synthesis and surface activity of novel amino acid surfactants

AbstractAmino acid surfactants (AASs) based on environmentally friendly biomasses have the characteristics of renewable, easy biodegradation, antibacterial and low toxicity, and have been widely used in daily chemicals, pharmaceuticals, and other fields. This study concerned the use of octanal and amino acids as raw materials. In addition, seven types of amino acid‐based surfactants, through Collins reagents, Wittig‐Hornor reaction, and aza‐Micheal addition reaction, and amino acid head groups were connected with the alkyl chain by the CN bond. The structures were confirmed by infrared spectroscopy (FT‐IR) and nuclear magnetic resonance spectroscopy (1HNMR). Its surface activity and adsorption properties are evaluated. The physical properties of amino acid‐based surfactants were tested by surface tension and dynamic contact angle. The results demonstrated that histidine‐based amino acid surfactant (C8His) has the lowest critical micelle concentration (CMC) and surface tension at CMC (γCMC), 0.39 mmol L−1 and 28.79 mN L−1, respectively. Amino acid residues contribute to reducing the critical micelle concentration of surfactant. The interfacial adsorption of glycine‐based amino acid surfactant (C8Gly) significantly improved with the increase in temperature, so the surface tension decreased significantly. In addition, sodium chloride could effectively enhance the interfacial adsorption, and the gas–liquid interfacial tension and contact angle of AASs decrease.

Dynamic Variation of Rectification Observed in Supramolecular Mixed Mercaptoalkanoic Acid.

Functionality in molecular electronics relies on inclusion of molecular orbital energy level within a transmission window. This can be achieved by designing the active molecule with accessible energy levels or by widening the window. While many studies have adopted the first approach, the latter is challenging because defects in the active molecular component cause low breakdown voltages. Here, it is shown that control over the packing structure of monolayer via supramolecular mixing transforms an inert molecule into a highly tunable rectifier. Binary mixed monolayer composed of alkanethiolates with and without carboxylic acid head group as a proof of concept is formed via a surface-exchange reaction. The monolayer withstands high voltages up to |4.5 V| and shows a dynamic rectification-external bias relationship in magnitude and polarity. Sub-highest occupied molecular orbital (HOMO) levels activated by the widened transmission window account for these observations. This work demonstrates that simple supramolecular mixing can imbue new electrical properties in electro-inactive organic molecules.

Folding and Unfolding of a Fully Synthetic Transmembrane Receptor for ON/OFF Signal Transduction.

Signal transduction processes in living organisms are mainly transmitted through conformational changes in transmembrane protein receptors. So far, the development of signal transduction models induced by artificial simulation of conformational changes remains limited. We herein report a new artificial receptor that achieves controllable "ON/OFF" signal transduction through conformational changes between the folding and unfolding of a transmembrane foldamer moiety. The receptor contains three functional modules: a lipid-anchored cholic acid headgroup, a foldamer transmembrane moiety, and a precatalyst tailgroup. After inserting in the lipid membrane, the addition of Zn2+ induces unfolding of the foldamer, which changes the molecular conformation and activates the tailgroup to enter the cavity to perform its catalytic task, resulting in signal transduction in an "ON" state. By further adding a competitive ligand to bind Zn2+, the transduction can be turned "OFF". External signals can be used to reversibly switch intravesicular catalysis on and off, which provides a new model for constructing artificial signal transduction systems.

Aerobic Biotransformation and Defluorination of Fluoroalkylether Substances (ether PFAS): Substrate Specificity, Pathways, and Applications.

Fluoroalkylether substances (ether PFAS) constitute a large group of emerging PFAS with uncertain environmental fate. Among them, GenX is the well-known alternative to perfluorooctanoic acid and one of the six proposed PFAS to be regulated by the U.S. Environmental Protection Agency. This study investigated the structure-biodegradability relationship for 12 different ether PFAS with a carboxylic acid headgroup in activated sludge communities. Only polyfluorinated ethers with at least one -CH2- moiety adjacent to or a C=C bond in the proximity of the ether bond underwent active biotransformation via oxidative and hydrolytic O-dealkylation. The bioreactions at ether bonds led to the formation of unstable fluoroalcohol intermediates subject to spontaneous defluorination. We further demonstrated that this aerobic biotransformation/defluorination could complement the advanced reduction process in a treatment train system to achieve more cost-effective treatment for GenX and other recalcitrant perfluorinated ether PFAS. These findings provide essential insights into the environmental fate of ether PFAS, the design of biodegradable alternative PFAS, and the development of cost-effective ether PFAS treatment strategies.

Discovery of NXT-10796, an orally active, intestinally restricted EP4 agonist prodrug for the treatment of inflammatory bowel disease

A property-focused optimization strategy was employed to modify the carboxylic acid head group of a class of EP4 agonists in order to minimize its absorption upon oral administration. The resulting oxalic acid monohydrazide-derived carboxylate isostere demonstrated utility as a class of prodrug showing colon-targeted delivery of parent agonist 2, with minimal exposure observed in the plasma. Oral administration of NXT-10796 demonstrated tissue specific activation of the EP4 receptor through modulation of immune genes in the colon, without modulation of EP4 driven biomarkers in the plasma compartment. Although further in depth understanding of the conversion of NXT-10796 is required for further assessment of the developability of this series of prodrugs, using NXT-10796 as a tool molecule has allowed us to confirm that tissue-specific modulation of an EP4-modulated gene signature is possible, which allows for further evaluation of this therapeutic modality in rodent models of human disease.

Oxidation of Per- and Polyfluoroalkyl Ether Acids and Other Per- and Polyfluoroalkyl Substances by Sulfate and Hydroxyl Radicals: Kinetic Insights from Experiments and Models.

Per- and polyfluoroalkyl substances (PFAS) are widely used anthropogenic chemicals. Because of the strength of the carbon-fluorine bond, PFAS are not destroyed in typical water treatment processes. Sulfate (SO4•-) and hydroxyl (•OH) radicals can oxidize some PFAS, but the behavior of per- and polyfluoroalkyl ether acids (PFEAs) in processes involving SO4•- and •OH is poorly understood. In this study, we determined second-order rate constants (k) describing the oxidation of 18 PFAS, including 15 novel PFEAs, by SO4•- and •OH. Among the studied PFAS, 6:2 fluorotelomer sulfonate reacted most readily with •OH [k•OH = (1.1-1.2) × 107 M-1 s-1], while polyfluoroalkyl ether acids containing an -O-CFH- moiety reacted more slowly [k•OH = (0.5-1.0) × 106 M-1 s-1]. In the presence of SO4•-, polyfluoroalkyl ether acids with an -O-CFH- moiety reacted more rapidly [kSO4•- = (0.89-4.6) × 106 M-1 s-1] than perfluoroalkyl ether carboxylic acids (PFECAs) and a chloro-perfluoro-polyether carboxylic acid (ClPFPECA) [kSO4•- = (0.85-9.5) × 104 M-1 s-1]. For homologous series of perfluoroalkyl carboxylic acids, linear and branched monoether PFECAs, and multiether PFECAs, PFAS chain length had little impact on second-order rate constants. SO4•- reacted with the carboxylic acid headgroup of perfluoroalkyl carboxylic acids and PFECAs. In contrast, for polyfluoroalkyl ether carboxylic and sulfonic acids with an -O-CFH- moiety, the site of SO4•- attack was the -O-CFH- moiety. Perfluoroalkyl ether sulfonic acids were not oxidized by SO4•- and •OH under the conditions evaluated in this study.

Design, Synthesis, and Structure-Activity Relationships of Biaryl Anilines as Subtype-Selective PPAR-alpha Agonists.

The role of peroxisome proliferator-activated receptor alpha (PPARα) in retinal biology is clarifying, and evidence demonstrates that novel PPARα agonists hold promising therapeutic utility for diseases like diabetic retinopathy and age-related macular degeneration. Herein, we disclose the design and initial structure-activity relationships for a new biaryl aniline PPARα agonistic chemotype. Notably, this series exhibits subtype selectivity for PPARα over other isoforms, a phenomenon postulated to be due to the unique benzoic acid headgroup. This biphenyl aniline series is sensitive to B-ring functionalization but allows isosteric replacement, and provides an opportunity for C-ring extension. From this series, 3g, 6j, and 6d were identified as leads with <90 nM potency in a cell-based luciferase assay cell and exhibited efficacy in various disease-relevant cell contexts, thereby setting the stage for further characterization in more advanced in vitro and in vivo models.

NTA-Cholesterol Analogue for the Nongenetic Liquid-Ordered Phase-Specific Functionalization of Lipid Membranes with Proteins.

The nongenetic modification of cell membranes with proteins is a straightforward way of cellular engineering. In these processes, it is important to specifically address the proteins to liquid-ordered (Lo) or liquid-disordered (Ld) domains as this can largely affect their biological functions. Herein, we report a cholesterol analogue (CHIM) with a nitrilotriacetic acid (NTA) headgroup, named CHIM-NTA. CHIM-NTA integrates into lipid membranes similar to the widely used phospholipid-derived DGS-NTA and, when loaded with Ni2+, allows for specific membrane immobilization of any polyhistidine-tagged proteins of choice. Yet, unlike DGS-NTA, it localizes to the Lo phase in phase-separated giant unilamellar vesicles (GUVs) and allows addressing His-tagged proteins to Lo domains. Furthermore, CHIM-NTA readily integrates into the membranes of live cells and thus enables the nongenetic modification of the cell surface with proteins. Overall, CHIM-NTA provides a facile and flexible way to modify biological membranes, in particular Lo domains, with His-tagged proteins and can serve as a broadly applicable molecular tool for cell surface engineering.

Hepatocyte Nuclear Factor 4α (HNF4α) Plays a Controlling Role in Expression of the Retinoic Acid Receptor β (RARβ) Gene in Hepatocytes.

HNF4α, a member of the nuclear receptor superfamily, regulates the genes involved in lipid and glucose metabolism. The expression of the RARβ gene in the liver of HNF4α knock-out mice was higher versus wildtype controls, whereas oppositely, RARβ promoter activity was 50% reduced by the overexpression of HNF4α in HepG2 cells, and treatment with retinoic acid (RA), a major metabolite of vitamin A, increased RARβ promoter activity 15-fold. The human RARβ2 promoter contains two DR5 and one DR8 binding motifs, as RA response elements (RARE) proximal to the transcription start site. While DR5 RARE1 was previously reported to be responsive to RARs but not to other nuclear receptors, we show here that mutation in DR5 RARE2 suppresses the promoter response to HNF4α and RARα/RXRα. Mutational analysis of ligand-binding pocket amino acids shown to be critical for fatty acid (FA) binding indicated that RA may interfere with interactions of FA carboxylic acid headgroups with side chains of S190 and R235, and the aliphatic group with I355. These results could explain the partial suppression of HNF4α transcriptional activation toward gene promoters that lack RARE, including APOC3 and CYP2C9, while conversely, HNF4α may bind to RARE sequences in the promoter of the genes such as CYP26A1 and RARβ, activating these genes in the presence of RA. Thus, RA could act as either an antagonist towards HNF4α in genes lacking RAREs, or as an agonist for RARE-containing genes. Overall, RA may interfere with the function of HNF4α and deregulate HNF4α targets genes, including the genes important for lipid and glucose metabolism.

CYP4F2 is a human-specific determinant of circulating N-acyl amino acid levels

N-acyl amino acids are a large family of circulating lipid metabolites that modulate energy expenditure and fat mass in rodents. However, little is known about the regulation and potential cardiometabolic functions of N-acyl amino acids in humans. Here, we analyze the cardiometabolic phenotype associations and genomic associations of four plasma N-acyl amino acids (N-oleoyl-leucine, N-oleoyl-phenylalanine, N-oleoyl-serine, and N-oleoyl-glycine) in 2,351 individuals from the Jackson Heart Study. We find that plasma levels of specific N-acyl amino acids are associated with cardiometabolic disease endpoints independent of free amino acid plasma levels and in patterns according to the amino acid head group. By integrating whole genome sequencing data with N-acyl amino acid levels, we identify that the genetic determinants of N-acyl amino acid levels also cluster according to amino acid head group. Furthermore, we identify the CYP4F2 locus as a genetic determinant of plasma N-oleoyl-leucine and N-oleoyl-phenylalanine levels in human plasma. In experimental studies, we demonstrate that CYP4F2-mediated hydroxylation of N-oleoyl-leucine and N-oleoyl-phenylalanine results in metabolic diversification and production of many previously unknown lipid metabolites with varying characteristics of the fatty acid tail group, including several that structurally resemble fatty acid hydroxy fatty acids (FAHFAs). These studies provide a structural framework for understanding the regulation and disease-associations of N-acyl amino acids in humans and identify that the diversity of this lipid signaling family can be significantly expanded through CYP4F-mediated ω-hydroxylation.

DEHP- extractant binding to trivalent lanthanide Er3+: Fast binding accompanied by concerted angular motions of hydration water.

Solvent extraction of trivalent rare earth metal ions by organophosphorus extractants proceeds via binding of phosphoric acid headgroups to the metal ion. Water molecules in the tightly bound first hydration shell of the metal ions must be displaced by oxygen atoms from phosphoric acid headgroups. Here, we use classical molecular dynamics simulations to explore the event in which a fully hydrated Er3+ binds to its first phosphoric acid headgroup. Approach of the headgroup into the region between the first and second hydration shells leads to a fast ejection of a water molecule that is accompanied by reordering of the hydration water molecules, including discretization of their angular positions and collective rotation about the metal ion. The water molecule ejected from the first shell is located diametrically opposite from the binding oxygen. Headgroup binding places a headgroup oxygen closer to Er3+ than its first hydration shell and creates a loosely bound water that subsequently exchanges between the first shell and its environment. This second exchange of water also occurs at discrete angular positions. This geometrical aspect of binding may be of relevance to understanding the binding and transport of ion-extractant complexes that are expected to occur at the organic-aqueous liquid-liquid interface used in solvent extraction processes.

Lipid-Specific Direct Translocation of the Cell-Penetrating Peptide NAF-144-67 across Bilayer Membranes.

The cell-penetrating peptide NAF-1 has recently emerged as a promising candidate for selective penetration and destruction of cancer cells. It displays numerous membrane-selective behaviors including cell-specific uptake and organelle-specific degradation. In this work, we explore membrane penetration and translocation of NAF-1 in model lipid bilayer vesicles as a function of lipid identity in zwitterionic phosphatidylcholine lipids mixed with anionic phosphatidylserine, phosphatidylglycerol, and phosphatidic acid lipids. By monitoring the digestion of NAF-1 using the protease trypsin located inside but not outside the vesicles, we determined that the translocation of NAF-1 was significantly enhanced by the presence of phosphatidic acid in the membrane compared to the other three anionic or zwitterionic lipids. These findings were correlated to fluorescence measurements of dansyl-labeled NAF-1, which revealed whether noncovalent interactions between NAF-1 and the bilayer were most stable either at the membrane/solution interface or within the membrane interior. Phosphatidic acid promoted interactions with fatty acid tails, while phosphatidylcholine, phosphatidylserine, and phosphatidylglycerol stabilized interactions with polar lipid headgroups. Interfacial vibrational sum frequency spectroscopy experiments revealed that the phosphate moiety on phosphatidic acid headgroups was better hydrated than on the other three lipids, which helped to shuttle NAF-1 into the hydrophobic region. Our findings demonstrate that permeation does not depend on the net charge on phospholipid lipid headgroups in these model vesicles and suggest a model wherein NAF-1 crosses membranes selectively due to lipid-specific interactions at bilayer surfaces.