Acid-soluble Spore Proteins Research Articles

Effect of a Small, Acid-Soluble Spore Protein from Clostridium perfringens on the Resistance Properties of Bacillus subtilis Spores

Alpha/beta-type small, acid-soluble spore proteins (SASP) are essential for the resistance of DNA in spores of Bacillus species to damage. An alpha/beta-type SASP, Ssp2, from Clostridium perfringens was expressed at significant levels in B. subtilis spores lacking one or both major alpha/beta-type SASP (alpha- and alpha- beta- strains, respectively). Ssp2 restored some of the resistance of alpha- beta- spores to UV and nitrous acid and of alpha- spores to dry heat. Ssp2 also restored much of the resistance of alpha- spores to nitrous acid and restored full resistance of alpha- spores to UV and moist heat. These results further indicate the interchangeability of alpha/beta-type SASP in DNA protection in spores.

Crystallization and preliminary X-ray analysis of the complex between aBacillus subtilisα/β-type small acid-soluble spore protein and DNA

An engineered variant of an alpha/beta-type small acid-soluble spore protein (SASP) from Bacillus subtilis was crystallized in a complex with a ten-base-pair double-stranded DNA by the hanging-drop vapor-diffusion method using ammonium sulfate as a precipitating agent. Crystals grew at 281 K using sodium cacodylate buffer pH 5.5 and these crystals diffracted X-rays to beyond 2.4 A resolution using synchrotron radiation. The crystallized complex contains two or three SASP molecules bound to one DNA molecule. The crystals belong to the hexagonal space group P6(1)22 or P6(5)22, with unit-cell parameters a = b = 87.0, c = 145.4 A, alpha = beta = 90.0, gamma = 120.0 degrees. Diffraction data were 96.6% complete to 2.4 A resolution, with an R(sym) of 8.5%. Structure solution by the multiwavelength/single-wavelength anomalous dispersion method using isomorphous crystals of selenomethionine-labeled protein is in progress.

Production of small, acid-soluble spore proteins inClostridium perfringensnonfoodborne gastrointestinal disease isolates

The molecular basis for the differences in heat resistance between spores of Clostridium perfringens food-borne versus nonfoodborne isolates remains unknown. Since a recent study demonstrated the role of small, acid-soluble spore proteins (SASPs) in heat resistance of spores of food-borne isolates, in the current study, we evaluated the expression of SASP-encoding genes (ssp) and the production of SASPs in nonfoodborne isolates. Our results demonstrated the presence of all three ssp genes in five surveyed nonfoodborne isolates. A beta-glucuronidase assay showed that these ssp genes are expressed specifically during sporulation. Furthermore, nonfoodborne isolate F4969 produced SASPs at a level similar to that of food-borne isolate SM101. Collectively, these results suggest that the difference in the levels of heat resistance between spores of food-borne and the nonfoodborne isolates is not the result of impaired expression of ssp genes and (or) decreased production of SASPs in nonfoodborne isolates.

UV-radiation-induced formation of DNA bipyrimidine photoproducts in Bacillus subtilis endospores and their repair during germination.

The spore photoproduct (SP) is the main DNA lesion after UV-C irradiation, and its repair is crucial for the resistance of spores to UV. The aims of the present study were to assess the formation and repair of bipyrimidine photoproducts in spore DNA of various Bacillus subtilis strains using a sensitive HPLC tandem mass spectrometry assay. Strains deficient in nucleotide excision repair, spore photoproduct lyase, homologous recombination (recA), and with wild-type repair capability were investigated. Additionally, one strain deficient in the formation of major small, acid-soluble spore proteins (SASPs) was tested. In all SASP wild-type strains, UV-C irradiation generated almost exclusively SP (>95 %) but also a few by-photoproducts. In the major SASP-deficient strain, SP and by-photoproducts were generated in equal quantities. The status time of 60 min, >75% of the SP was repaired in wild-type strains and in the SASP-deficient strain, while half of the photoinduced SP was removed in the recA-deficient strain. SP-lyase-deficient spores repaired 20% of the SP produced. Thus, SP lyase, with respect to nucleotide excision repair, has a remarkable impact on the removal of SP upon spore germination.

Comparison of the properties of Bacillus subtilis spores made in liquid or on agar plates

To compare the properties of the spores of Bacillus subtilis prepared in liquid and on plates. The spores of B. subtilis were prepared at 37 degrees C using a nutrient exhaustion medium either in liquid or on agar plates. The levels of core water, dipicolinic acid (DPA) and small, acid-soluble spore proteins (SASP) were essentially identical in spores made in liquid or on plates. Spores prepared in liquid were killed approximately threefold more rapidly at 90 degrees C in water than the spores prepared on plates, and the spores prepared in liquid were more sensitive to nitrous acid and a diluted stable superoxidized water. Spores prepared in liquid also germinated more rapidly with several agents than those prepared on plates. Pellets of spores prepared on plates were darker than spores prepared in liquid, and spores prepared in liquid had more readily extracted coat protein. However, there were no major differences in the relative levels of individual coat proteins or the cross-linking of the coat protein GerQ in the two types of spores, although the inner membrane of spores prepared on plates had a higher ratio of anteiso- to iso-fatty acids. The preparation in liquid yielded spores with some different properties than those made on agar plates. Spores made in liquid had lower resistance to heat and several chemicals, and germinated more readily with several agents. There were also differences in the composition of the inner membrane of spores prepared under these two conditions. However, there were no major differences in the levels of DPA, core water, SASP and individual coat proteins or the cross-linking of a coat protein in spores made in liquid and on plates. This work demonstrates that the preparation method can affect the resistance and germination properties of bacterial spores, even if an identical medium and temperature are used. Evidence was also obtained consistent with the role of the inner membrane in spore resistance and germination, and that some factor in addition to core water, DPA and SASP content plays a role in spore resistance to wet heat.

Antisense-RNA-Mediated Decreased Synthesis of Small, Acid-Soluble Spore Proteins Leads to Decreased Resistance of Clostridium perfringens Spores to Moist Heat and UV Radiation

Previous work has suggested that a group of alpha/beta-type small, acid-soluble spore proteins (SASP) is involved in the resistance of Clostridium perfringens spores to moist heat. However, this suggestion is based on the analysis of C. perfringens spores lacking only one of the three genes encoding alpha/beta-type SASP in this organism. We have now used antisense RNA to decrease levels of alpha/beta-type SASP in C. perfringens spores by approximately 90%. These spores had significantly reduced resistance to both moist heat and UV radiation but not to dry heat. These results clearly demonstrate the important role of alpha/beta-type SASP in the resistance of C. perfringens spores.

Killing of spores of Bacillus subtilis by tert-butyl hydroperoxide plus a TAML�activator

To determine the effectiveness of tert-butyl hydroperoxide (tBHP) plus the cationic surfactant cetyltrimethyl ammonium bromide (CTAB) and a tetra-amido macrocyclic ligand (TAML) activator in killing spores of Bacillus subtilis and the mechanisms of spore resistance to and killing by this reagent. Killing of spores of B. subtilis by tBHP was greatly stimulated by the optimum ratio of concentrations of a TAML activator (1.7 micromol l(-1)) to tBHP (4.4%, vol/vol) plus a low level (270 mg l(-1)) of CTAB. Rates of killing of spores lacking most DNA protective alpha/beta-type small, acid-soluble spore proteins (alpha(-)beta(-) spores) or the major DNA repair protein, RecA, by tBHP plus CTAB and a TAML activator were essentially identical to that of wild-type spore killing. Survivors of wild-type and alpha(-)beta(-) spores treated with tBHP plus CTAB and a TAML activator also exhibited no increase in mutations. Spores lacking much coat protein either because of mutation or chemical decoating were much more sensitive to this reagent than were wild-type spores, but were more resistant than growing cells. Wild-type spores killed with this reagent retained their large pool of dipicolinic acid (DPA), and the survivors of spores treated with this reagent were sensitized to wet heat. The tBHP plus CTAB and TAML activator-killed spores germinated with nutrients, albeit more slowly than untreated spores, but germinated faster than untreated spores with dodecylamine. The killed spores were also germinated by application of 150 and 500 megaPascals of pressure for 15 min and by lysozyme treatment in hypertonic medium, but these spores lysed shortly after their germination. The combination of tBHP plus CTAB and a TAML activator is effective in killing B. subtilis spores. The spore coat is a major factor in spore resistance to this reagent system, which does not kill spores by DNA damage or by inactivating some component needed for spore germination. Rather, this reagent system appears to kill spores by damaging the spore's inner membrane in some fashion. This work demonstrates that tBHP plus CTAB and a TAML activator is an effective and mild decontaminant for spores of Bacillus species. Evidence has also been obtained on the mechanisms of spore resistance to and killing by this reagent system.

Mechanisms of killing of spores of Bacillus subtilis by dimethyldioxirane

To determine the mechanisms of Bacillus subtilis spore resistance to and killing by a novel sporicide, dimethyldioxirane (DMDO) that was generated in situ from acetone and potassium peroxymonosulfate at neutral pH. Spores of B. subtilis were effectively killed by DMDO. Rates of killing by DMDO of spores lacking most DNA protective alpha/beta-type small, acid-soluble spore proteins (alpha- beta- spores) or the major DNA repair protein, RecA, were very similar to that of wild-type spore killing. Survivors of wild-type and alpha- beta- spores treated with DMDO also exhibited no increase in mutations. Spores lacking much coat protein due either to mutation or chemical decoating were much more sensitive to DMDO than were wild-type spores, but were more resistant than growing cells. Wild-type spores killed with this reagent retained their large pool of dipicolinic acid (DPA), and the survivors of spores treated with DMDO were sensitized to wet heat. The DMDO-killed spores germinated with nutrients, albeit more slowly than untreated spores, but germinated faster than untreated spores with dodecylamine. The killed spores were also germinated by very high pressures and by lysozyme treatment in hypertonic medium, but many of these spores lysed shortly after their germination, and none of these treatments were able to revive the DMDO-killed spores. DMDO is an effective reagent for killing B. subtilis spores. The spore coat is a major factor in spore resistance to DMDO, which does not kill spores by DNA damage or by inactivating some component needed for spore germination. Rather, this reagent appears to kill spores by damaging the spore's inner membrane in some fashion. This work demonstrates that DMDO is an effective decontaminant for spores of Bacillus species that can work under mild conditions, and the killed spores cannot be revived. Evidence has also been obtained on the mechanisms of spore resistance to and killing by this reagent.

The impact of functional genomics on microbiological food quality and safety

In the food processing industry, unwanted occurrence and growth of spoilage and pathogenic microorganisms is a key concern. A prime example is the extremely heat resistant bacterial endospores, microbial survival structures, that create problems due to their ability to survive classical thermal treatments and their ability to subsequently germinate and form actively growing vegetative cells. Research on food spoilage Bacillus subtilis isolates using the Amplified Fragment Length Polymorphism (AFLP) technology and micro-array technology has identified a number of genomic factors correlated to the level of spore heat resistance. Strains could be classified according to these genomic markers. In addition, it was shown with the sequenced B. subtilis laboratory strain that sporulation in the presence of in particular calcium ions in a cocktail of calcium, magnesium, iron, manganese and potassium promotes thermal resistance of developing spores. This physiological observation correlated with an increased expression during sporulation of genes encoding small acid soluble spore proteins. Screening of ingredients using DNA-chip based techniques identifying the above indicated molecular markers, should allow in the future the identification of the occurrence of spoilage and pathogenic bacteria and prediction of their thermal preservation stress resistance. Currently various projects aiming at the integration of genomics data and micro(nano)-technology, a prerequisite if the alluded to ingredient Quality Control is going to succeed, are running or are being set-up. Information from these projects will be used together with the requirements of product organoleptic quality to derive robust integrated food safety and food quality processing parameters. Such parameters should form the basis of future food Quality Assurance systems.

Investigating the role of small, acid-soluble spore proteins (SASPs) in the resistance of Clostridium perfringens spores to heat

BackgroundClostridium perfringens type A food poisoning is caused by enterotoxigenic C. perfringens type A isolates that typically possess high spore heat-resistance. The molecular basis for C. perfringens spore heat-resistance remains unknown. In the current study, we investigated the role of small, acid-soluble spore proteins (SASPs) in heat-resistance of spores produced by C. perfringens food poisoning isolates.ResultsOur current study demonstrated the presence of all three SASP-encoding genes (ssp1, 2 and 3) in five surveyed C. perfringens clinical food poisoning isolates. β-Glucuronidase assay showed that these ssp genes are expressed specifically during sporulation. Consistent with these expression results, our study also demonstrated the production of SASPs by C. perfringens food poisoning isolates. When the heat sensitivities of spores produced by a ssp3 knock-out mutant of a C. perfringens food poisoning isolate was compared with that of spores of the wild-type strain, spores of the ssp3 mutant were found to exhibit a lower decimal reduction value (D value) at 100°C than exhibited by the spores of wild-type strain. This effect was restored by complementing the ssp3 mutant with a recombinant plasmid carrying wild-type ssp3, suggesting that the observed differences in D values between spores of wild-type versus ssp3 mutant was due to the specific inactivation of ssp3. Furthermore, our DNA protection assay demonstrated that C. perfringens SASPs can protect DNA from DNase I digestion.ConclusionThe results from our current study provide evidences that SASPs produced by C. perfringens food poisoning isolates play a role in protecting their spores from heat-damage, which is highly significant and relevant from a food safety perspective. Further detailed studies on mechanism of action of SASPs from C. perfringens should help in understanding the mechanism of protection of C. perfringens spores from heat-damage.

Role of Dipicolinic Acid in Resistance and Stability of Spores of Bacillus subtilis with or without DNA-Protective α/β-Type Small Acid-Soluble Proteins

Dipicolinic acid (DPA) comprises approximately 10% of the dry weight of spores of Bacillus species. Although DPA has long been implicated in spore resistance to wet heat and spore stability, definitive evidence on the role of this abundant molecule in spore properties has generally been lacking. Bacillus subtilis strain FB122 (sleB spoVF) produced very stable spores that lacked DPA, and sporulation of this strain with DPA yielded spores with nearly normal DPA levels. DPA-replete and DPA-less FB122 spores had similar levels of the DNA protective alpha/beta-type small acid-soluble spore proteins (SASP), but the DPA-less spores lacked SASP-gamma. The DPA-less FB122 spores exhibited similar UV resistance to the DPA-replete spores but had lower resistance to wet heat, dry heat, hydrogen peroxide, and desiccation. Neither wet heat nor hydrogen peroxide killed the DPA-less spores by DNA damage, but desiccation did. The inability to synthesize both DPA and most alpha/beta-type SASP in strain PS3664 (sspA sspB sleB spoVF) resulted in spores that lost viability during sporulation, at least in part due to DNA damage. DPA-less PS3664 spores were more sensitive to wet heat than either DPA-less FB122 spores or DPA-replete PS3664 spores, and the latter also retained viability during sporulation. These and previous results indicate that, in addition to alpha/beta-type SASP, DPA also is extremely important in spore resistance and stability and, further, that DPA has some specific role(s) in protecting spore DNA from damage. Specific roles for DPA in protecting spore DNA against damage may well have been a major driving force for the spore's accumulation of the high levels of this small molecule.

Spores of Bacillus subtilis: their resistance to and killing by radiation, heat and chemicals

A number of mechanisms are responsible for the resistance of spores of Bacillus species to heat, radiation and chemicals and for spore killing by these agents. Spore resistance to wet heat is determined largely by the water content of spore core, which is much lower than that in the growing cell protoplast. A lower core water content generally gives more wet heat-resistant spores. The level and type of spore core mineral ions and the intrinsic stability of total spore proteins also play a role in spore wet heat resistance, and the saturation of spore DNA with alpha/beta-type small, acid-soluble spore proteins (SASP) protects DNA against wet heat damage. However, how wet heat kills spores is not clear, although it is not through DNA damage. The alpha/beta-type SASP are also important in spore resistance to dry heat, as is DNA repair in spore outgrowth, as Bacillus subtilis spores are killed by dry heat via DNA damage. Both UV and gamma-radiation also kill spores via DNA damage. The mechanism of spore resistance to gamma-radiation is not well understood, although the alpha/beta-type SASP are not involved. In contrast, spore UV resistance is due largely to an alteration in spore DNA photochemistry caused by the binding of alpha/beta-type SASP to the DNA, and to a lesser extent to the photosensitizing action of the spore core's large pool of dipicolinic acid. UV irradiation of spores at 254 nm does not generate the cyclobutane dimers (CPDs) and (6-4)-photoproducts (64PPs) formed between adjacent pyrimidines in growing cells, but rather a thymidyl-thymidine adduct termed spore photoproduct (SP). While SP is formed in spores with approximately the same quantum efficiency as that for generation of CPDs and 64PPs in growing cells, SP is repaired rapidly and efficiently in spore outgrowth by a number of repair systems, at least one of which is specific for SP. Some chemicals (e.g. nitrous acid, formaldehyde) again kill spores by DNA damage, while others, in particular oxidizing agents, appear to damage the spore's inner membrane so that this membrane ruptures upon spore germination and outgrowth. There are also other agents such as glutaraldehyde for which the mechanism of spore killing is unclear. Factors important in spore chemical resistance vary with the chemical, but include: (i) the spore coat proteins that likely react with and detoxify chemical agents; (ii) the relative impermeability of the spore's inner membrane that restricts access of exogenous chemicals to the spore core; (iii) the protection of spore DNA by its saturation with alpha/beta-type SASP; and (iv) DNA repair for agents that kill spores via DNA damage. Given the importance of the killing of spores of Bacillus species in the food and medical products industry, a deeper understanding of the mechanisms of spore resistance and killing may lead to improved methods for spore destruction.

Levels of Glycine Betaine in Growing Cells and Spores of Bacillus Species and Lack of Effect of Glycine Betaine on Dormant Spore Resistance

Bacteria of various Bacillus species are able to grow in media with very high osmotic strength in part due to the accumulation of low-molecular-weight osmolytes such as glycine betaine (GB). Cells of Bacillus species grown in rich and minimal media contained low levels of GB, but GB levels were 4- to 60-fold higher in cells grown in media with high salt. GB levels in Bacillus subtilis cells grown in minimal medium were increased approximately 7-fold by GB in the medium and 60-fold by GB plus high salt. GB was present in spores of Bacillus species prepared in media with or without high salt but at lower levels than in comparable growing cells. With spores prepared in media with high salt, GB levels were highest in B. subtilis spores and > or =20-fold lower in B. cereus and B. megaterium spores. Although GB levels in B. subtilis spores were elevated 15- to 30-fold by GB plus high salt in sporulation media, GB levels did not affect spore resistance. GB levels were similar in wild-type B. subtilis spores and spores that lacked major small, acid-soluble spore proteins but were much lower in spores that lacked dipicolinic acid.

Mechanisms of Bacillus subtilis spore killing by and resistance to an acidic Fe3+-EDTA-iodide-ethanol formulation

To determine the mechanisms of Bacillus subtilis spore killing by and resistance to an acidic solution containing Fe(3+), EDTA, KI and ethanol termed the KMT reagent. Wild-type B. subtilis spores were not mutagenized by the KMT reagent but the wild-type and recA spores were killed at the same rate. Spores (alpha(-)beta(-)) lacking most DNA-protective alpha/beta-type small, acid-soluble spore proteins were less resistant to the KMT reagent than wild-type spores but were also not mutagenized, and alpha(-)beta(-) and alpha(-)beta(-)recA spores exhibited nearly identical resistance. Spore resistance to the KMT reagent was greatly decreased if spores had defective coats. However, the level of unsaturated fatty acids in the inner membrane did not determine spore sensitivity to the KMT reagent. Survivors in spore populations killed by the KMT reagent were sensitized to killing by wet heat or nitrous acid and to high salt in plating medium. KMT reagent-killed spores had not released their dipicolinic acid (DPA), although these killed spores released their DPA more readily when germinated with dodecylamine than did untreated spores. However, KMT reagent-killed spores did not germinate with nutrients or Ca(2+)-DPA and were recovered only poorly by lysozyme treatment in a hypertonic medium. The KMT reagent does not kill spores by DNA damage and a major factor in spore resistance to this reagent is the spore coat. KMT reagent treatment damages the spore's ability to germinate, perhaps by damaging the spore's inner membrane. However, this damage is not oxidation of unsaturated fatty acids. These results provide information on the mechanism of spore resistance to and killing by the KMT reagent developed for killing Bacillus spores.

Proteins and dipicolinic acid released during heat shock activation of Bacillus subtilis spores probed by optical spectroscopy

UV fluorescence and absorption spectroscopy from Bacillus subtilis spores detected proteins and dipicolinic acid (DPA) released into the supernatant after heat treatments ranging from 20 degrees to 90 degrees C. The protein and DPA concentration in the supernatant was greater with higher heat treatment temperatures, undergoing a substantial increase for T > or = 60 degrees C, and supporting the theory that spores undergo a phase transition from a glassylike to a rubberylike state at 56 degrees C. Gel electrophoresis detected several small proteins with molecular weights between 6 and 11 kDa. These proteins may be small acid-soluble spore proteins that are present in spores but break down during germination. A 30 kDa protein extracted above 60 degrees C is related to the rubber-glass phase transition.

Rapid Chemical Digestion of Small Acid-Soluble Spore Proteins for Analysis of Bacillus Spores

A method for the rapid identification of Bacillus spores is proposed, based on the selective release and chemical digestion of small, acid-soluble spore proteins (SASPs). Microwave-assisted acid hydrolysis of SASPs from B. anthracis str. Sterne and B. subtilis str. 168 was accomplished in a single step requiring only 90 s of heating. The peptide products of the chemical digestion were identified by postsource decay sequencing with a MALDI-TOF-MS equipped with a curved-field reflectron. The specificity of the observed SASP peptides was evaluated using a cross-species sequence search. The incomplete nature of the acid digestion under these conditions allowed detection of the digest products along with the proteins from which they originated, which increased species identification confidence. The feasibility of this approach for the rapid identification of Bacillus species was further demonstrated by analyzing a mixture of B. subtilis str. 168 and B. anthracis str. Sterne spores.

Top-Down Proteomics for Rapid Identification of Intact Microorganisms

We apply MALDI-TOF/TOF mass spectrometry for the rapid and high-confidence identification of intact Bacillus spore species. In this method, fragment ion spectra of whole (undigested) protein biomarkers are obtained without the need for biomarker prefractionation, digestion, separation, and cleanup. Laser-induced dissociation (unimolecular decay) of higher mass (>5 kDa) precursor ions in the first TOF analyzer is followed by reacceleration and subsequent high-resolution mass analysis of the resulting sequence-specific fragments in a reflectron TOF analyzer. In-house-developed software compares an experimental MS/MS spectrum with in silico-generated tandem mass spectra from all protein sequences, contained in a proteome database, with masses within a preset range around the precursor ion mass. A p-value, the probability that the observed matches between experimental and in silico-generated fragments occur by chance, is computed and used to rank the database proteins to identify the most plausible precursor protein. By inference, the source microorganism is then identified on the basis of the identification of individual, unique protein biomarker(s). As an example, intact Bacillus atrophaeus and Bacillus cereus spores, either pure or in mixtures, were unambiguously identified by this method after fragmenting and identifying individual small, acid-soluble spore proteins that are specific for each species. Factors such as experimental mass accuracy and number of detected fragment ions, precursor ion charge state, and sequence-specific fragmentation have been evaluated with the objective of extending the approach to other microorganisms. MALDI-TOF/TOF-MS in a lab setting is an efficient tool for in situ confirmation/verification of initial microorganism identification.

Role of the Nfo (YqfS) and ExoA Apurinic/Apyrimidinic Endonucleases in Protecting Bacillus subtilis Spores from DNA Damage

The Bacillus subtilis enzymes ExoA and Nfo (originally termed YqfS) are endonucleases that can repair apurinic/apyrimidinic (AP) sites and strand breaks in DNA. We have analyzed how the lack of ExoA and Nfo affects the resistance of growing cells and dormant spores of B. subtilis to a variety of treatments, some of which generate AP sites and DNA strand breaks. The lack of ExoA and Nfo sensitized spores (termed alpha-beta-) lacking the majority of their DNA-protective alpha/beta-type small, acid-soluble spore proteins (SASP) to wet heat. However, the lack of these enzymes had no effect on the wet-heat resistance of spores that retained alpha/beta-type SASP. The lack of either ExoA or Nfo sensitized wild-type spores to dry heat, but loss of both proteins was necessary to sensitize alpha-beta- spores to dry heat. The lack of ExoA and Nfo also sensitized alpha-beta-, but not wild-type, spores to desiccation. In contrast, loss of ExoA and Nfo did not sensitize growing cells or wild-type or alpha-beta- spores to hydrogen peroxide or t-butylhydroperoxide. Loss of ExoA and Nfo also did not increase the spontaneous mutation frequency of growing cells. exoA expression took place not only in growing cells, but also in the forespore compartment of the sporulating cell. These results, together with those from previous work, suggest that ExoA and Nfo are additional factors that protect B. subtilis spores from DNA damage accumulated during spore dormancy.

Site-Directed Mutagenesis and Structural Studies Suggest that the Germination Protease, GPR, in Spores ofBacillusSpecies Is an Atypical Aspartic Acid Protease

Germination protease (GPR) initiates the degradation of small, acid-soluble spore proteins (SASP) during germination of spores of Bacillus and Clostridium species. The GPR amino acid sequence is not homologous to members of the major protease families, and previous work has not identified residues involved in GPR catalysis. The current work has focused on identifying catalytically essential amino acids by mutagenesis of Bacillus megaterium gpr. A residue was selected for alteration if it (i) was conserved among spore-forming bacteria, (ii) was a potential nucleophile, and (iii) had not been ruled out as inessential for catalysis. GPR variants were overexpressed in Escherichia coli, and the active form (P41) was assayed for activity against SASP and the zymogen form (P46) was assayed for the ability to autoprocess to P41. Variants inactive against SASP and unable to autoprocess were analyzed by circular dichroism spectroscopy and multi-angle laser light scattering to determine whether the variant's inactivity was due to loss of secondary or quaternary structure, respectively. Variation of D127 and D193, but no other residues, resulted in inactive P46 and P41, while variants of each form were well structured and tetrameric, suggesting that D127 and D193 are essential for activity and autoprocessing. Mapping these two aspartate residues and a highly conserved lysine onto the B. megaterium P46 crystal structure revealed a striking similarity to the catalytic residues and propeptide lysine of aspartic acid proteases. These data indicate that GPR is an atypical aspartic acid protease.

Identification of marker proteins for Bacillus anthracis using MALDI‐TOF MS and ion trap MS/MS after direct extraction or electrophoretic separation

Direct extraction of bacterial vegetative cells or spores followed by matrix-assisted laser desorption ionization/time of flight mass spectrometry (MALDI TOF MS) has become popular for bacterial identification, since it is simple to perform and mass spectra are readily interpreted. However, only high-abundance proteins that are of low mass and ionize readily are observed. In the case of B. anthracis spores, small acid-soluble spore proteins (SASPs) have been the most widely studied. Additional information can be obtained using tandem mass spectrometry (MS-MS) to confirm the identity of proteins by sequencing. This is most readily accomplished using ion trap (IT) MS-MS. However, enzymatic digestion of these proteins is needed to generate peptides that are within the mass range of the ion trap. The use of sodium dodecyl sulfate polyacrylamide gel electrophoresis (SDS-PAGE), or other forms of electrophoresis, allows one to focus on specific proteins of interest (e.g. the high mass exosporium glycoproteins BcIA and BcIB) that provide additional species- and strain-specific discrimination.