Acid Methyl Ester Research Articles

Integrated Metabolomics and Network Pharmacology Study on the Mechanism of Rehmanniae radix Extract for Treating Thrombosis.

Rehmanniae Radix (RR) has received attention for its antithrombotic effect. However, few studies have independently explored the bioactive components responsible for its antithrombotic bioactivity and the potential mechanism. We aimed to reveal the antithrombotic mechanisms of RR by using metabolomics integrated with network pharmacology. A thrombosis model was established by intraperitoneal injection of type I carrageenan in rats, and antithrombotic function was evaluated at different doses of RR. Metabolomics was used to identify the differential metabolites in the serum. Network pharmacology was then applied to identify the potential targets for the antithrombotic activity of the RR. An integrated network of metabolomics and network pharmacology was constructed using Cytoscape. Finally, key targets were verified using molecular docking. RR at 5.4 g/kg significantly alleviated the thrombosis. Thirteen potentially significant metabolites were involved in the therapeutic effects of RR against thrombosis, most of which were regulated for recovery after RR treatment. An integrated analysis of metabolomics and network pharmacology showed that the antithrombosis effect of RR was closely associated with the regulation of PLA2G2A, PTGS1, ALOX5, and CYP2C9. Molecular docking showed high affinity between the key targets and components of RR. We speculated that the components of RR, such as catalpol, ferulic acid methyl ester, and methyl 4-hydroxycinnamate, might act on key proteins, including PLA2G2A, PTGS1, and ALOX5, to exert antithrombosis effects. This study confirmed the antithrombotic effect of high-dose RR, revealed the antithrombotic mechanism and potential material basis, and laid the foundation for the antithrombotic clinical application of RR. Furthermore, it provides a successful case reference for screening natural herbal components and exploring their potential pharmacological mechanisms.

Thermal Conversion of Coral Waste and its Utilization as Low-Cost Catalyst for Biodiesel Production

This study investigates the thermal conversion of waste coral and its utilization as a heterogeneous catalyst for biodiesel production from soybean oil. In this work, waste coral is calcined at varied temperatures of 800, 900, and 1000°C, and the effect of the calcination temperature on the physicochemical character of the solid is evaluated through Fourier-transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, and basicity measurement. The results show that the higher temperature facilitates the conversion of CaCO3 of the aragonite and calcite phases in raw waste coral into CaO, achieving a complete conversion at the temperature of 1000°C. Thermal conversion influences the increased surface basicity of the solid, which is associated with the higher activity for biodiesel production. Further studies on the obtained CaO as a catalyst demonstrate the catalyst dosage and the methanol-to-oil ratio as significant factors for fatty acid methyl ester production. The highest yield of 98.7% is achieved after a 3 hours reaction with 8 wt.% catalyst dosage and 9:1 methanol-to-oil ratio. The catalyst exhibits stability with an insignificantly decreased yield until the fifth usage cycle. The optimum conditions and reusability features of the calcined waste coral suggest that waste coral is a favorable CaO catalyst source for biodiesel production.

Evaluation of high-value bioproducts production by marine endophytic fungus Arthrinium sp. FAKSA 10 under solid state fermentation using agro-industrial wastes

BackgroundTo address public health challenges, there is increasing interest in bioactive metabolites from unconventional sources for targeted cancer and viral treatments with minimal side effects. Endophytic fungi are promising for these therapies. This study focused on maximizing bioactive agent yields from these fungi using a low-cost medium and optimized fermentation system. ResultsForty-three endophytic fungi isolated from Sinularia polydactyla were cultivated on wheat bran medium and evaluated for bioactive metabolites under solid-state fermentation. Strain FAKSA 10, identified as Arthrinium sp. FAKSA 10, exhibited the highest levels of pharmaceutical metabolites, including L-glutaminase, L-methioninase, L-arginase, L-asparaginase, L-tyrosinase, L-lysine α-oxidase, and ribonuclease, with a 79.12% hepatitis C virus knockdown rate. This strain produced 46 metabolites with anticancer, antioxidant, antiviral, and cytotoxic properties, including major compounds like hexadecanoic acid methyl ester; hexadecanoic acid ethyl ester; 9, 12-octadecadienoic acid (Z, Z), methyl ester; 9-octadecenoic acid (Z)-, methyl ester, and 11, 14-eicosadienoic acid, methyl ester. A cost effective strategy using 11 agro-industrial residues was applied, following by optimization of the solid-state fermentation system. This optimization increased enzyme yields and enhanced antiviral and antioxidant activities. The optimal conditions for solid-state fermentation were a 10 d incubation, 1 mm particle size, 60% initial moisture, 28°C temperature, and 2 × 107 CFU/mL inoculum size. ConclusionsThis study exploited Arthrinium sp. FAKSA 10 metabolites as natural pharmaceuticals against cancer and viral diseases, highlighting their significant antioxidant properties. Among various residues, oil cakes emerged as an effective and cost-efficient medium, capable of significantly enhancing the production of valuable bioactive metabolites.

The Effect of Ethanol Treatment of PEDOT:PSS Hole Transport Layer on the Performance of P3HT: PCBM-Based Solar Cells

The Poly (3,4-ethylenedioxythiophene):poly (styrene sulfonate) (PEDOT:PSS) hole transport layer was treated with ethanol to optimize the performance of poly(3-hexylthiophene) (P3HT): [6,6]-phenyl-C61-butyric acid methyl ester (PCBM) based organic polymer solar cells. Washing out of the insulating PSS from the PEDOT:PSS film by ethanol promoted the formation of a conducting PEDOT chain network so that both the conductivity of PEDOT:PSS film and the properties of P3HT: PCBM-based solar cells were improved significantly.

Heteropolyacid and Lithium Infused Calcium Oxide Catalyst for Biodiesel Production from Food Waste

The advancement of mixed metal oxide catalysts has attracted considerable attention among various workers. Supported MoOx catalyst materials possess more Lewis and Brønsted acid functionalities which assist in the efficient biodiesel production. In this study, ammonium molybdate and Li+ were loaded over eggshells-derived calcium oxide to transesterify the frying oil/waste cooking oil (WCO) to produce biodiesel/fatty acid methyl ester (FAME). Characterization techniques i.e., X-ray diffraction (XRD), scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) analysis were employed to confirm the material. The surface modelling predicted the transesterification reaction parameters. The optimal condition to transesterify WCO with synthesized Mo/Li/CaO catalyst was 6 wt.% catalyst dose, 13.70:1 ratio of methanol:oil (m/o), time of 1 h and 60 ºC temperature. The optimum FAME yield of 97% was observed. The gas chromatography-mass spectroscopy (GC-MS) and other spectroscopic techniques were used to analyze produced FAME. The reusability of catalyst was good and the catalyst can be reutilized effectively up to a limit of 5 runs. By leveraging this innovative catalyst derived from eggshells, this study contribute to a more sustainable and cost-effective biodiesel production process.

Phycoremediation of Domestic Waste Water and Biodiesel Extraction from Fresh-Water Microalgae

ABSTRACT: Microalgae have recently drawn attention as a potential source for the sustainable production of biotechnologically valuable resources and improving the environment in various ways. They are widely distributed and can thrive even under extreme circumstances like high temperatures or high salinity. However, producing microalgae takes a lot of nutrients, which may have an adverse impact on the environment and the economy. The use of wastewater, particularly those from agro-industrial facilities, domestic waste waters, and industrial discharges, which often contain high nutrient concentrations, can serve as an alternative to synthetic culture media. Because the composition of wastewater and usual culture media is relatively similar, wastewater can be utilized to both clean itself and culture microalgae at the same time. Utilizing microalgae as wastewater bioremediation agents can efficiently remove N and P from domestic wastewater, maintain dissolved oxygen concentration, and reduce the various disease-causing pathogens and fecal bacteria that are present in domestic wastewater. The potential of microalgae to be used as a feedstock is increased by their ability to change the composition of their biomass under stress and accumulate lipids or carbohydrates that might be used to produce biodiesel. Methyl or ethyl esters of fatty acids produced from triglycerides by transesterification process by using renewable feedstocks are known as biodiesel. The microalgal biomass is considered as the next generation of feedstock for biofuel production. The Dual function of microalgae in domestic wastewater treatment and biomass growth for biodiesel production is outlined and discussed in detail in this review paper.

Microbial oil from R. opacus: Sustainable biodiesel production

Generating additional and efficient biodiesel routes will rely heavily on advancements in clean energy technologies along with the creation of novel fermentation tactics and analyses. To create biofuels of the second generation from alternative carbon sources other than food, oleaginous microbes with the capacity to accumulate methyl esters of fatty acids (FAMEs), such as Rhodococcus species, can be utilised. These "micro biorefineries" offer a technique to convert waste streams from industry and agriculture into fungible fuels or compounds that can be used as building blocks for other substances and chemicals. Due to their similar content to typical raw materials like plant-based oils, oils from bacteria have become a feasible substitute to create biodiesel from raw material. The fact that they do not compete for arable land or with food for people or animals is another benefit of them. Using hydrolysate as the only source of carbon, a carbon and energy balance for the model species R. opacus was assessed in this study. A favourable energy balance was shown by the method. The viability of bacterial oil as a biofuel substrate was also assessed by measuring the lipid fatty acid profile and cetane number. Also, an analysis of the oil yields from bacterial, microalgae and plant-based oils is shown in terms of how much land each uses. The findings revealed that R. opacus oil production is significantly more than plant-based oils (650 times) and microalgae (30 times).

Decoding organic compounds in lava tube sulfates to understand potential biomarkers in the Martian subsurface

Exploring molecular biomarkers in lava tube speleothems offers insights into environmental dynamics, biogeochemical processes, and subsurface life, with implications for astrobiology, particularly in Martian analog environments. Despite extensive biomarker research in marine and terrestrial settings, lava tube studies are limited. This study employed molecular, isotope and mineralogical characterization to analyze sulfate speleothems from six lava tubes of Lanzarote (Canary Islands), considered analog for the Moon and Mars. The combination of mass spectrometry, thermogravimetry, and mineralogical techniques, revealed geological processes, biomarkers and their biological sources. The identified minerals were primarily calcium and sodium sulfates. Sulfur isotope analyses indicated volcanic and oceanic origins, while carbon isotope composition and pyrolysis analyses suggested influences from vegetation and microbial activity. Lipidic profiles highlighted branched and n-alkanes, as well as palmitic and stearic acid methyl esters, suggesting microbial origins. These findings contribute to understanding geological and environmental dynamics in lava tubes and recognizing potential biosignatures on Earth and other planets.

Transesterification catalyst strength as observed by solution-based oxygen-17 nuclear magnetic resonance spectroscopy

Natural abundance oxygen-17 nuclear magnetic resonance spectroscopy (17O-NMR) was applied to study homogeneous transesterification catalysts for fatty acid methyl ester production. Alkoxide catalysts were made with selected permutations of lithium, sodium, magnesium, and potassium hydroxides with ethanol, methanol, isopropanol, and glycerol. Pilot scale transesterification reactions of Canola oil were completed and the 17O-NMR spectra were collected from the reaction products. The alkoxide solutions showed the downfield shifts relative to the reagent alcohol, in a linear relationship with the concentration of catalyst ion. The electron deshielding of the oxygen of the alkoxide catalyst is observed directly by 17O-NMR, and the fastest catalyst has the largest downfield (high frequency) shift. This effect is most pronounced in potassium methoxide and less pronounced for less polar solvents such as isopropanol.

Nematicidal and Insecticidal Compounds from the Laurel Forest Endophytic Fungus Phyllosticta sp.

The search for natural product-based biopesticides from endophytic fungi is an effective tool to find new solutions. In this study, we studied a pre-selected fungal endophyte, isolate YCC4, from the paleoendemism Persea indica, along with compounds present in the extract and the identification of the insect antifeedant and nematicidal ones. The endophyte YCC4 was identified as Phyllosticta sp. by molecular analysis. The insect antifeedant activity was tested by choice bioassays against Spodoptera littoralis, Myzus persicae, and Rhopalosiphum padi, and the in vitro and in vivo mortality was tested against the root-knot nematode Meloidogyne javanica. Since the extract was an effective insect antifeedant, a strong nematicidal, and lacked phytotoxicity on tomato plants, a comprehensive chemical study was carried out. Two new metabolites, metguignardic acid (4) and (-)-epi-guignardone I (14), were identified along the known dioxolanones guignardic acid (1), ethyl guignardate (3), guignardianones A (5), C (2), D (7), and E (6), phenguignardic acid methyl ester (8), the meroterpenes guignardone A (9) and B (10), guignarenone B (11) and C (12), (-)-guignardone I (13), and phyllomeroterpenoid B (15). Among these compounds, 1 and 4 were effective antifeedants against S. littoralis and M. persicae, while 2 was only active on the aphid M. persicae. The nematicidal compounds were 4, 7, and 8. This is the first report on the insect antifeedant or nematicidal effects of these dioxolanone-type compounds. Since the insect antifeedant and nematicidal activity of the Phyllosticta sp. extract depend on the presence of dioxolanone components, future fermentation optimizations are needed to promote the biosynthesis of these compounds instead of meroterpenes.

Production and optimization of biofuels from locally isolated algal biomass: Strategies for circular economy integration

In the present study, we investigated the potential of locally isolated algal strains as alternative energy sources for sustainable biofuel production. The focus of this study was to identify algal strains that are capable of accumulating oils rich in essential fatty acids. Algal samples were collected from different areas and 14 isolates were obtained. Among the various pretreatment methods tested, hydrothermal pretreatment using sulfuric acid at 95 °C yielded the best results, with sample IIB-14 containing more than 2% reducing sugars. These sugars were then used for fermentation with the S. cerevisiae strain, resulting in an ethanol concentration of 3.52% ± 0.2%. This holistic approach contributes to the development of low-cost and environmentally friendly alternatives to traditional energy sources. While algal biofuels offer a promising substitute for fossil fuels, further advancements are needed before they can be widely adopted in the fuel market. Among these, isolates IIB-8 and IIB-9 showed the highest oil yields of 22.84% and 24.69% (w/w), respectively. The specific environmental settings for optimal growth of these strains were determined, and the physicochemical parameters of the oils, including iodine value, viscosity, density, acid value, saponification value, unsaponifiable mass, and peroxide value, were analyzed. The transesterification of oils into fatty acid methyl esters (FAMEs) revealed the presence of significant amounts of fatty acids, including EPA, DHA, and linoleic acid. Moreover, the study also explored the potential of algal biomass for bioethanol production, addressing the sustainability concerns of renewable energy supplies. Hydrothermal pretreatment using sulfuric acid at 95 °C yielded the highest concentration of reducing sugars (>2%) in IIB-14. Sugar extracted from algal biomass was used for fermentation. The Saccharomyces cerevisiae strain used for the fermentation process yielded an ethanol concentration of 3.52% ± 0.2%. This holistic approach contributes to the development of low-cost and environment-friendly alternatives to renewable energy sources. Algal biofuels may offer a practical substitute for fossil fuels, but there is still a long way to go before they can enter the fuel market and are widely used.

Fabrication of heterogeneous catalyst for production of biodiesel form municipal sludge

Sewage sludge, a semi-solid byproducts of municipal wastewater treatment processes, offers a sustainable and cost-effective feedstock for biodiesel production through the synthesis of catalytic heterogeneous catalysts. In this study, we developed a novel heterogeneous catalyst by impregnating aluminum nitrate and calcite, obtained from carbon dioxide-sequestering bacteria, onto DigSBiochar (Biochar derived from digested sewage sludge). The produced catalyst was subsequently immobilized with the lipase enzyme isolated from Bacillus sp., creating a bioactive material for the transesterification of lipids in sewage sludge. Comprehensive characterization of the biocatalysts was conducted using Energy Dispersive Spectroscopy (EDS), Fourier Transform Infrared Spectroscopy (FTIR), and Field Emission Scanning Electron Microscopy (FE-SEM). Gas Chromatography-Mass Spectrometry (GC-MS) analysis of the resulting fatty acid methyl esters (FAMEs) demonstrated that the highest yield was achieved with the enzyme immobilized on the activated heterogeneous catalyst using methanol (99 %), followed by the activated heterogeneous catalyst with methanol (96 %), and methanol with Sulfuric acid (82 %). This study underscores the potential of utilizing municipal sewage sludge as a valuable resource for producing efficient heterogeneous catalysts, thereby advancing sustainable waste management practices and promoting renewable energy production.

Enhanced Glycerolysis of Fatty Acid Methyl Ester by Static Mixer Reactor.

This study investigates the synthesis of monoglycerides (MGs) and diglycerides (DGs) from glycerol (G) and fatty acid methyl ester (FAME) using a static mixer reactor (SMR), which combines a static mixer (SM) with a reactor tank. The SMR integrates Kenics static mixers (KSM) and low-pressure drop static mixers (LPDSM) with varying length-to-diameter ratios (L/D = 1.0 and 1.5). Keys glycerolysis parameters, including the G:FAME molar ratio of 2:1-3:1, 2-3 wt % potassium hydroxide (KOH), and reaction time of 30-90 min at 150 °C were systematically explored. The SMR design allows precise control over the reaction time without altering the feed flow rate or tube length and avoiding agitator leakage. The optimal operating conditions, determined through a face-centered central composite design, resulted in 71.35% MGs and 14.20% DGs at a 3:1 molar ratio of G to FAME, 3 wt % KOH, 60 min, and 150 °C using an LPDSM with an L/D of 1.5. In comparison, an LPDSM with an L/D of 1 achieved 79.28% MGs and 10.17% DGs under the same conditions. When applied to purified crude glycerol, these conditions yielded 61.09% MGs and 23.44% DGs. The study found that a lower L/D ratio improved the mixing efficiency but increased the pressure drop. The SMR demonstrated superior performance in glycerolysis compared with conventional stirred tank reactors and ultrasonic probe reactors, indicating its potential for enhanced industrial application.

Karakteristik Pembakaran Droplet Campuran Metil Oleat – Etanol dengan Penambahan Multi -Walled Carbon Nanotubes

This research intended to investigate the combustion characteristics of methyl oleic – ethanol blend with OH functionalized multi-walled carbon nanotubes (MWCNT-OH) addition. Methyl oleic is an unsaturated fatty acid methyl ester, which is a constituent of various biodiesels. The observed fuel was a mixture of Methyl oleic with 20% vol of ethanol. MWCNT-OH content was varied by 100 ppm, 200 ppm, 300 ppm, 400 ppm, and 500 ppm (wt based). The presence of ethanol in the droplets is intended to promote the microexplosion phenomenon, generating smaller droplets and a shorter burning time. The experimental results show that the MWCNT-OH addition on the droplet of Methyl oleic – ethanol blend decreased the ignition delay and droplet burning time, while the constant burning rate and droplet temperature (and flame temperature) were increased. Reducing ignition delay time due to the higher thermal conductivity of nanofluid droplets results in more effective heat absorption from the environment and better heat transport inside the droplet. Hence, droplet vaporization, flammable mixture formation and ignition occur in a shorter time. Furthermore, this condition encourages a higher burning rate and a lower droplet burning time. The higher droplet and flame temperatures are related to the higher heating value of the methyl oleic – ethanol – MWCNT-OH mixture and higher droplet burning rate, which results in a higher heat release rate.

Comparison between Traditional and Novel NMR Methods for the Analysis of Sicilian Monovarietal Extra Virgin Olive Oils: Metabolic Profile Is Influenced by Micro-Pedoclimatic Zones.

Nuclear magnetic resonance (NMR) metabolomic analysis was applied to investigate the differences within nineteen Sicilian Nocellara del Belice monovarietal extra virgin olive oils (EVOOs), grown in two zones that are different in altitude and soil composition. Several classes of endogenous olive oil metabolites were quantified through a nuclear magnetic resonance (NMR) three-experiment protocol coupled with a yet-developed data-processing called MARA-NMR (Multiple Assignment Recovered Analysis by Nuclear Magnetic Resonance). This method, taking around one-hour of experimental time per sample, faces the possible quantification of different class of compounds at different concentration ranges, which would require at least three alternative traditional methods. NMR results were compared with the data of traditional analytical methods to quantify free fatty acidity (FFA), fatty acid methyl esters (FAMEs), and total phenol content. The presented NMR methodology is compared with traditional analytical practices, and its consistency is also tested through slightly different data treatment. Despite the rich literature about the NMR of EVOOs, the paper points out that there are still several advances potentially improving this general analysis and overcoming the other cumbersome and multi-device analytical strategies. Monovarietal EVOO's composition is mainly affected by pedoclimatic conditions, in turn relying upon the nutritional properties, quality, and authenticity. Data collection, analysis, and statistical processing are discussed, touching on the important issues related to the climate changes in Sicily and to the specific influence of pedoclimatic conditions.

Green integrative large scale treatment of tannery effluent, CO2 sequestration, and biofuel production using oleaginous green microalga Nannochloropsis oculata TSD05: An ecotechnological approach

In this present investigation, the freshwater microalga Nannochloropsis oculata TSD05 was used to demonstrate multiforius environmental applications viz., bioremediation of tannery effluent, carbon sequestration, and green renewable biodiesel production from treated microalgal biomass. The microalga Nannochloropsis oculata TSD05 was exhibited unique heavy metal reduction capabilities and reduced significant amount of heavy metals viz., 96.62% of copper (Cu2+), 99.9% of chromium (Cr3+), 98.36% of zinc (Zn2+), 98.71% of cadmium (Cd2+), 97.96% of lead (Pb2+), 98.88% of Cobalt (Co2+), and 98.76% of nickel (Ni2+). The biosorption capacity rate (qmax) of heavy metals reduction and highest R2 of 97.84% exhibited at 12 days of effluent treatment by Langmuir and Freundlich isotherm models. The phytotoxicity analysis was tested againt treated tannery effluent using Vigna radiate, Sapindus muukorossi seeds and 98.45%, 99.05% seeds were germinated. The Nannochloropsis oculata TSD05 microalga was utilized 98.45% of CO2 by biofixation kinetics, 372 mg g−1 of lipid, 3.65 mg mL−1 of biomass and 4.64 mLg−1 of biodiesel were produced. The produced biodiesel was confirmed and identification of 18 fatty acid methyl ester (biodiesel) compounds using GCMS. The recognition of 17 functional groups was identified using FTIR analysis and the microalga Nannochloropsis oculata TSD05 potential for sustainable and renewable green energy production. The potential future application of Nannochloropsis oculata TSD05 is to increase lipid production and biodiesel yield. Scaling up the bioremediation process can also validate these microalga's feasibility for use in wastewater treament. Enhancing heavy metal biosorption and carbon sequestration efficiency through genetic engineering could also maximize environmental benefits.

Novel Feruloyl Esterase for the Degradation of Polyethylene Terephthalate (PET) Screened from the Gut Microbiome of Plastic-Degrading Mealworms (Tenebrio Molitor Larvae).

Mealworms (Tenebrio molitor) larvae can degrade both plastics and lignocellulose through synergistic biological activities of their gut microbiota because they share similarities in chemical and physical properties. Here, a total of 428 genes encoding lignocellulose-degrading enzymes were screened from the gut microbiome of T. molitor larvae to identify poly(ethylene terephthalate) (PET)-degrading activities. Five genes were successfully expressed in E. coli, among which a feruloyl esterase-like enzyme named TmFae-PETase demonstrated the highest PET degradation activity, converting PET into MHET (0.7 mgMHETeq ·h-1·mgenzyme-1) and TPA (0.2 mgTPAeq ·h-1·mgenzyme-1) at 50 °C. TmFae-PETase showed a preference for the hydrolysis of ferulic acid methyl ester (MFA) in the presence of both PET and MFA. Site-directed mutagenesis and molecular dynamics simulations of TmFae-PETase revealed similar catalytic mechanisms for both PET and MFA. TmFae-PETase effectively depolymerized commercial PET, making it a promising candidate for application. Additionally, the known PET hydrolases IsPETase, FsC, and LCC also hydrolyzed MFA, indicating a potential origin of PET hydrolytic activity from its lignocellulosic-degrading abilities. This study provides an innovative strategy for screening PET-degrading enzymes identified from lignocellulose degradation-related enzymes within the gut microbiome of plastic-degrading mealworms. This discovery expands the existing pool of plastic-degrading enzymes available for resource recovery and bioremediation applications.

Repellent Effects of Coconut Fatty Acid Methyl Esters and Their Blends with Bioactive Volatiles on Winged Myzus persicae (Sulzer) Aphids (Hemiptera: Aphididae).

Myzus persicae (Sulzer) (Hemiptera: Aphididae) is one of the most important aphid crop pests, due to its direct damage and its ability to transmit viral diseases in crops. The objective is to test whether spraying nanoemulsions of botanical products repels winged individuals of M. persicae in a bioassay in culture chambers. The bioactive volatiles were applied on pepper plants at a dose of 0.2% alone or at 0.1% of each component in blends. A treated plant and a control plant were placed at each side of an entomological cage inside a growth chamber. The winged individuals were released between the plants, in a black-painted Petri dish suspended by wires in the upper half of the cage. The most repellent products were farnesol (repellency index, RI = 40.24%), (E)-anethole (RI = 30.85%) and coconut fatty acid methyl ester (coconut FAME) (RI = 28.93%), alone or in the following blends: farnesol + (E)-anethole + distilled lemon oil (RI = 36.55%) or (E)-anethole + distilled lemon oil + coconut FAME (RI = 30.63%). The observed effect of coconut FAME on aphids is the first report of this product having a repellent effect on a crop pest. Repellent substances for viral disease vectors should be further investigated to develop new strategies for plant protection.

Evaluation of Cobalt, Nickel, and Palladium Complexes as Catalysts for the Hydrogenation and Improvement of Oxidative Stability of Biodiesel

Developing effective catalysts that can selectively hydrogenate C=C bonds in biodiesel samples is vital as it tackles the major problem of oxidative stability, which greatly limits the utilization of biodiesel as an alternative fuel. In this work, Co, Ni, and Pd catalysts stabilized with the bidentate nitrogen ligands N-(3-(triethoxysilyl)propyl)pyridin-2-ylmethylimine and N-(3-(triethoxysilyl)propyl)picolinamide were synthesized, characterized, and used as pre-catalysts in the transfer hydrogenation of C=C bonds in fatty acid methyl esters. The active catalysts from the Co, Ni, and Pd complexes sequentially hydrogenate the C18:2 chains to C18:1, which is further converted to C18:0 in the FAMEs of both methyl linoleate and jatropha biodiesel. The hydrogenation process was kinetically controlled, and after 3 h it yielded a biodiesel sample that contained 25.83% C16:0, 12.52% C18:2, 41.54% C18:1, 14.47% C18:0 and 3.0% C18:2 isomers. The un-hydrogenated jatropha diesel, hydrogenated jatropha diesel, and a B20 blend of jatropha were tested for susceptibility to oxidation reactions using the Rancimat method and FTIR spectroscopy, and the partial hydrogenation had improved the induction period by 3 h.

Bioassay-Guided Isolation and Identification of Xanthine Oxidase Inhibitory Constituents from the Fruits of Chaenomeles speciosa (Sweet) Nakai.

Chaenomeles speciosa (Sweet) Nakai (C. speciosa) is a traditional Chinese herbal medicine that possesses not only abundant nutritional value but also significant medicinal properties. The extracts of C. speciosa fruits effectively reduce urate levels, but the specific chemical constituents responsible for this effect in C. speciosa fruits are still unknown. Therefore, this study aims to investigate and analyze the structure-activity relationships of these constituents to better understand their ability to lower uric acid. Activity-guided fractionation and purification processes were used to isolate compounds with xanthine oxidase (XO) inhibitory activity from C. speciosa fruits, resulting in three extracts: petroleum ether, ethyl acetate, and n-butanol. The ethyl acetate and n-butanol fractions showed strong activity and underwent further separation and purification using chromatographic techniques. Twenty-four compounds were isolated and identified, with nine showing potent activity, including chlorogenic acid, methyl chlorogenate, butyl chlorogenate, ethyl chlorogenate, cryptochlorogenic acid methyl ester, caffeic acid, p-coumaric acid, benzoic acid and protocatechuic acid. The docking analysis showed that these compounds interacted with amino acid residues in the active site of XO through hydrogen bonding and hydrophobic interactions. These findings suggest that these compounds help reduce uric acid in C. speciosa, supporting further investigation into their mechanism of action.