Accumulation Of By-products Research Articles

Intrinsic Screening Descriptor for Organic Proton Donors to Enable Long Lifespan Aqueous Zinc||Polyaniline Batteries

AbstractThe incorporation of additives into aqueous electrolytes provides substantial opportunities to mitigate dendrite formation and side reactions on zinc anodes. However, there is a lack of an effective guideline for selecting suitable electrolyte additives based on critical performance‐limiting factors. Herein, the use of the acid dissociation constant (pKa) as an intrinsic descriptor for screening suitable organic proton donors is proposed to achieve highly reversible Zn||polyaniline (PANI) batteries. Experimental results and theoretical calculations reveal that L‐malic acid (L‐MA) with a low pKa can supply constant protons to effectively reduce the accumulation of nonconductive alkaline byproducts and address the deprotonation issue of the PANI cathode. Meanwhile, the deprotonated malate anions form bidentate coordination with Zn2+, thereby reconfiguring a water‐deficient solvation structure of hydrated Zn2+ and facilitating the formation of ZnCO3‐rich solid electrolyte interphase. Taking L‐MA as a demonstration, Zn||Zn symmetric cells can stably cycle for over 460 h at a high depth of discharge of 80%. Additionally, the L‐MA additive enables Zn||PANI full cells to retain 89% capacity after 5000 cycles. The screening principle of organic proton‐donors that can simultaneously stabilize Zn anode and cathode of aqueous batteries is highlighted here.

Synergistic Regulation of Anode and Cathode Interphases via an Alum Electrolyte Additive for High‐Performance Aqueous Zinc‐Vanadium Batteries

AbstractA zinc (Zn) metal anode paired with a vanadium oxide (VOx) cathode is a promising system for aqueous Zn–ion batteries (AZIBs); however, side reactions proliferating on the Zn anode surface and the infinite dissolution of the VOx cathode destabilise the battery system. Here, we introduce a multi‐functional additive into the ZnSO4 (ZS) electrolyte, KAl(SO4)2 (KASO), to synchronise the in situ construction of the protective layer on the surface of the Zn anode and the VOx cathode. Theoretical calculations and synchrotron radiation have verified that the high‐valence Al3+ plays dual roles of competing with Zn2+ for solvation and forming a Zn−Al alloy layer with a homogeneous electric field on the anode surface to mitigate the side reactions and dendrite generation. The Al‐containing cathode–electrolyte interface (CEI) considerably alleviates the irreversible dissolution of the VOx cathode and the accumulation of byproducts. Consequently, the Zn||Zn cell with KASO exhibits an ultra‐long cycle of 6000 h at 2 mA cm−2. Importantly, the VOx cathodes (VO2, V2O5 and NH4V4O10) in the ZS−KASO electrolyte showed excellent cycling stability, including Zn powder||VO2 cells and Zn||VO2 pouch cells. Even better, the full cell exhibits excellent cycling stability at low negative/positive (N/P) ratio of 2.83 and high mass loading (~16 mg cm−2). This study offers a straightforward and practical reference for concurrently addressing challenges at the anode and cathode of AZIBs.

Synergistic Regulation of Anode and Cathode Interphases via an Alum Electrolyte Additive for High-Performance Aqueous Zinc-Vanadium Batteries.

A zinc (Zn) metal anode paired with a vanadium oxide (VOx) cathode is a promising system for aqueous Zn-ion batteries (AZIBs); however, side reactions proliferating on the Zn anode surface and the infinite dissolution of the VOx cathode destabilise the battery system. Here, we introduce a multi-functional additive into the ZnSO4 (ZS) electrolyte, KAl(SO4)2 (KASO), to synchronise the in situ construction of the protective layer on the surface of the Zn anode and the VOx cathode. Theoretical calculations and synchrotron radiation have verified that the high-valence Al3+ plays dual roles of competing with Zn2+ for solvation and forming a Zn-Al alloy layer with a homogeneous electric field on the anode surface to mitigate the side reactions and dendrite generation. The Al-containing cathode-electrolyte interface (CEI) considerably alleviates the irreversible dissolution of the VOx cathode and the accumulation of byproducts. Consequently, the Zn||Zn cell with KASO exhibits an ultra-long cycle of 6000 h at 2 mA cm-2. Importantly, the VOx cathodes (VO2, V2O5 and NH4V4O10) in the ZS-KASO electrolyte showed excellent cycling stability, including Zn powder||VO2 cells and Zn||VO2 pouch cells. Even better, the full cell exhibits excellent cycling stability at low negative/positive (N/P) ratio of 2.83 and high mass loading (~16 mg cm-2). This study offers a straightforward and practical reference for concurrently addressing challenges at the anode and cathode of AZIBs.

Optimizing Fermentation Strategies for Enhanced Tryptophan Production in Escherichia coli: Integrating Genetic and Environmental Controls for Industrial Applications

Tryptophan is an essential aromatic amino acid widely used in the pharmaceutical, agricultural, and feed industries. Microbial fermentation, mainly using Escherichia coli, has become the preferred method for its production due to sustainability and lower costs. Optimizing tryptophan production requires careful control of various fermentation parameters, including nutrients, pH, temperature, and dissolved oxygen (DO) levels. Glucose, as the primary carbon source, must be fed at controlled rates to avoid metabolic overflow, which leads to by-product accumulation and reduced production efficiency. Nitrogen sources, both organic (such as yeast extract) and inorganic (like ammonium), influence biomass growth and tryptophan yield, with ammonium levels requiring careful regulation to avoid toxic accumulation. Phosphate enhances growth but can lead to by-product formation if used excessively. pH is another critical factor, with an optimal range between 6.5 and 7.2, where enzyme activity is maximized. Temperature control promotes growth and production, particularly between 30 °C and 37 °C. High DO levels increase tryptophan titers by boosting the pentose phosphate pathway and reducing by-products like acetate. Furthermore, surfactants and supplements such as betaine monohydrate and citrate help alleviate osmotic stress and enhance precursor availability, improving production efficiency. Careful manipulation of these parameters allows for high-density cell cultures and significant tryptophan accumulation, making microbial fermentation competitive for large-scale production.

Breath inspired multifunctional low-cost inorganic colloidal electrolyte for stable zinc metal anode

The practical application of aqueous zinc-ion batteries (AZIBs) is primarily constrained by issues such as corrosion, zinc dendrite formation, and the hydrogen evolution reaction occurring at the zinc metal anode. To overcome these challenges, strategies for optimizing the electrolyte are crucial for enhancing the stability of the zinc anode. Inspired by the role of hemoglobin in blood cells, which facilitates oxygen transport during human respiration, an innovative inorganic colloidal electrolyte has been developed: calcium silicate-ZnSO4 (denoted as CS-ZSO). This electrolyte operates in weak acidic environment and releases calcium ions, which participate in homotopic substitution with zinc ions, while the solvation environment of hydrated zinc ions in the electrolyte is regulated. The reduced energy barrier for the transfer of zinc ions and the energy barrier for the desolvation of hydrated ions imply faster ion transfer kinetics and accelerated desolvation processes, thus favoring the mass transfer process. Furthermore, the silicate colloidal particles act as lubricants, improving the transfer of zinc ions. Together, these factors contribute to the more uniform concentration of zinc ions at the electrode/electrolyte interface, effectively inhibiting zinc dendrite formation and reducing by-product accumulation. The Zn//CS-ZSO//Zn symmetric cell demonstrates stable operation for over 5000 h at 1 mA cm−2, representing 29-fold improvement compared to the Zn//ZSO//Zn symmetric cell, which lasts only 170 h. Additionally, the Zn//CS-ZSO//Cu asymmetric cell shows stable average Coulombic efficiency (CE) exceeding 99.6% over 2400 cycles, significantly surpassing the performance of the ZSO electrolyte. This modification strategy for electrolytes not only addresses key limitations associated with zinc anodes but also provides valuable insights into stabilizing anodes for the advancement of high-performance aqueous zinc-ion energy storage systems.

Fine-Regulating the Carbon Flux of l-Isoleucine Producing Corynebacterium glutamicum WM001 for Efficient l-Threonine Production.

l-Threonine, an essential amino acid, is widely used in various industries, with an annually growing demand. However, the present Corynebacterium glutamicum strains are difficult to achieve industrialization of l-threonine due to low yield and purity. In this study, we engineered an l-isoleucine-producing C. glutamicum WM001 to efficiently produce l-threonine by finely regulating the carbon flux. First, the threonine dehydratase in WM001 was mutated to lower the level of l-isoleucine production, then the homoserine dehydrogenase and aspartate kinase were mutated to release the feedback inhibition of l-threonine, and the resulting strain TWZ006 produced 14.2 g/L l-threonine. Subsequently, aspartate ammonia-lyase and aspartate transaminase were overexpressed to accumulate the precursor l-aspartate. Next, phosphoenolpyruvate carboxylase, pyruvate carboxylase and pyruvate kinase were overexpressed, and phosphoenolpyruvate carboxykinase, oxaloacetate decarboxylase were inactivated to fine-regulate the carbon flux among oxaloacetate, pyruvate and phosphoenolpyruvate. The resulting strain TWZ017 produced 21.5 g/L l-threonine. Finally, dihydrodipicolinate synthase was mutated with strong allosteric inhibition from l-lysine to significantly decrease byproducts accumulation, l-threonine export was optimized, and the final engineered strain TWZ024/pXTuf-thrE produced 78.3 g/L of l-threonine with the yield of 0.33 g/g glucose and the productivity of 0.82 g/L/h in a 7 L bioreactor. To the best of our knowledge, this represents the highest l-threonine production in C. glutamicum, providing possibilities for industrial-scale production.

Comprehensive stable-isotope tracing of glucose and amino acids identifies metabolic by-products and their sources in CHO cell culture

Mammalian cell culture processes are widely utilized for biotherapeutics production, disease diagnostics, and biosensors, and hence, should be optimized to support robust cell growth and viability. However, toxic by-products accumulate in cultures due to inefficiencies in metabolic activities and nutrient utilization. In this study, we applied comprehensive 13C stable-isotope tracing of amino acids and glucose to two Immunoglobulin G (IgG) producing Chinese Hamster Ovary (CHO) cell lines to identify secreted by-products and trace their origins. CHO cells were cultured in media formulations missing a single amino acid or glucose supplemented with a 13C-tracer of the missing substrate, followed by gas chromatography-mass spectrometry (GC-MS) analysis to track labeled carbon flows and identify by-products. We tracked the sources of all secreted by-products and verified the identity of 45 by-products, majority of which were derived from glucose, leucine, isoleucine, valine, tyrosine, tryptophan, methionine, and phenylalanine. In addition to by-products identified previously, we identified several metabolites including 2-hydroxyisovaleric acid, 2-aminobutyric acid, L-alloisoleucine, ketoisoleucine, 2-hydroxy-3-methylvaleric acid, desmeninol, and 2-aminobutyric acid. When added to CHO cell cultures at different concentrations, certain metabolites inhibited cell growth while others including 2-hydroxy acids, surprisingly, reduced lactate accumulation. In vitro enzymatic analysis indicated that 2-hydroxy acids were metabolized by lactate dehydrogenase suggesting a possible mechanism for lowered lactate accumulation, e.g., competitive substrate inhibition. The 13C-labeling assisted metabolomics pipeline developed and the metabolites identified will serve as a springboard to reduce undesirable by-products accumulation and alleviate inefficient substrate utilization in mammalian cultures used for biomanufacturing and other applications through altered media formulations and pathway engineering strategies.

Transcriptional Downregulation of Methanol Metabolism Key Genes During Yeast Death in Engineered Pichia pastoris.

Pichia pastoris possesses the unique ability to utilize methanol as its sole carbon source, which makes it a proper host for producing various high-value-added products via metabolic engineering. Nevertheless, cell death has been observed during the fermentation of modified P. pastoris, with limited literature elucidating the underlying causes and mechanisms. Understanding the death mechanisms during methanol-based fermentation is crucial for optimizing fermentation strategies, enhancing the accumulation of target products, and reducing production costs. Here, we first sought to eliminate the potential causes of cell death during fermentation, such as inadequate inorganic salts and toxic by-product accumulation. The elimination of these potential causes was achieved efficiently utilizing the high-throughput fermentation equipment. Subsequently, we established a correlation between yeast cell death and the duration of the methanol metabolism period by monitoring the growth of the yeast at different fermentation stages. A critical revelation from this work came from analyzing the yeast's transcriptomic data at various stages of methanol metabolism. It was observed that a significant characteristic of yeast cell death during fermentation was the marked down-regulation of transcript levels of key enzymes involved in the methanol assimilation pathway and genes related to their biosynthesis process. The findings of this work are crucial for better understanding the causes and mechanisms of cell death for engineered P. pastoris during methanol-utilized fermentation.

The Ultimate Fate of Reactive Dyes Absorbed onto Polymer Beads: Feasibility and Optimization of Sorbent Bio-Regeneration under Alternated Anaerobic–Aerobic Phases

Dyes employed in many production cycles are characterized by high toxicity and persistence in the environment, and conventional wastewater treatments often fail to reach high removal efficiencies. Consequently, there is an increasing research demand aimed at the development of more efficient and sustainable technologies. A two-step strategy consisting of dye sorption followed by sorbent bio-regeneration is proposed here, with a special focus on the regeneration step. The objective of this study was to establish the best operating conditions to achieve regeneration of dye-loaded polymers and concurrently the ultimate removal of the dyes. To this aim, the bio-regeneration of the Hytrel 8206 polymer, used as a sorbent material to remove Remazol Red dye from textile wastewater, was investigated in a two-phase partitioning bioreactor (TPPB) under alternated anaerobic–aerobic conditions. Comprehensive analysis of operational parameters, including sorbent load and initial contamination levels, was conducted to optimize bio-regeneration efficiency. Experimental data demonstrated high regeneration efficiencies (91–98%) with biodegradation efficiencies up to 89%. This study also examines the biodegradation process to investigate the fate of biodegradation intermediates; results confirmed the successful degradation of the dye without significant by-product accumulation. This research underscores the potential of TPPB-based bio-regeneration of polymeric sorbent material for sustainable wastewater treatment, offering a promising solution to the global challenge of dye pollution in water resources.

Effect of Fe2O3 on CeO2 films in the photocatalytic evaluation towards the degradation of brilliant green and oxytetracycline

This paper presents a photochemical synthesis method for producing pure CeO2 deposits and CeO2 deposits loaded with varying proportions of Fe2O3. The deposits were calcined at 950 °C and characterized structurally, compositionally, and morphologically using XRD, XPS, SEM, FT-IR, and Raman spectroscopy techniques. Cerianite and hematite phases were identified in CeO2/Fe2O3 samples, indicating heterogeneous surface deposits. Photocatalytic testing under UV–Vis illumination for 5 h demonstrated promising results. For the degradation of bright green dye, efficiencies of 78.9 % and 90.1 % were achieved for pure CeO2 and CeO2 samples loaded with 1.0 mol% Fe2O3, respectively. Similarly, for oxytetracycline drug degradation, performance rates of 35.3 % and 67.0 % were observed for CeO2 and CeO2 samples loaded with 1.0 mol% Fe2O3, respectively. Recyclability tests showed a gradual decline in photocatalytic performance over successive cycles due to by-product accumulation contaminating the catalyst.

Metabolism and transcriptional response mechanisms insight into the Lacticaseibacillus paracasei under the intervention of milk powder storage by-products

To explore the influence of milk powder storage by-products on the probiotic activity, Lacticaseibacillus paracasei JY025 fortified milk powder was used to evaluate the change of bacterial activity and the accumulation of Maillard and lipid oxidation by-products during long-term storage. Based on the above results, this study further clarifies the effect mechanism of milk powder by-products on the metabolism and transcriptional response of Lacticaseibacillus paracasei JY025. The results of the strain JY025 growth ability and its metabolic ability of various carbon sources under different by-product interventions indicated that the Maillard by-products (higher concentrations) and the lipid oxidation by-products inhibit the growth metabolic of Lactobacillus. The transcriptomic analysis of strains under different interventions further suggested the intervention of Maillard by-products with a specific concentration improve the ability of Lactobacillus to utilize carbohydrates, which helps to provide additional energy and improve the tolerance of Lactobacillus to lipid oxidation by-product stress.

Emerging Therapeutic Approaches and Genetic Insights in Stargardt Disease: A Comprehensive Review.

Stargardt disease, one of the most common forms of inherited retinal diseases, affects individuals worldwide. The primary cause is mutations in the ABCA4 gene, leading to the accumulation of toxic byproducts in the retinal pigment epithelium (RPE) and subsequent photoreceptor cell degeneration. Over the past few years, research on Stargardt disease has advanced significantly, focusing on clinical and molecular genetics. Recent studies have explored various innovative therapeutic approaches, including gene therapy, stem cell therapy, and pharmacological interventions. Gene therapy has shown promise, particularly with adeno-associated viral (AAV) vectors capable of delivering the ABCA4 gene to retinal cells. However, challenges remain due to the gene's large size. Stem cell therapy aims to replace degenerated RPE and photoreceptor cells, with several clinical trials demonstrating safety and preliminary efficacy. Pharmacological approaches focus on reducing toxic byproduct accumulation and modulating the visual cycle. Precision medicine, targeting specific genetic mutations and pathways, is becoming increasingly important. Novel techniques such as clustered regularly interspaced palindromic repeats (CRISPR)/Cas9 offer potential for directly correcting genetic defects. This review aims to synthesize recent advancements in understanding and treating Stargardt disease. By highlighting breakthroughs in genetic therapies, stem cell treatments, and novel pharmacological strategies, it provides a comprehensive overview of emerging therapeutic options.

Auto-inducible synthetic pathway in E. coli enhanced sustainable indigo production from glucose

Indigo is widely used in textile industries for denim garments dyeing and is mainly produced by chemical synthesis which, however, raises environmental sustainability issues. Bio-indigo may be produced by fermentation of metabolically engineering bacteria, but current methods are economically incompetent due to low titer and the need for an inducer. To address these problems, we first characterized several synthetic promoters in E. coli and demonstrated the feasibility of inducer-free indigo production from tryptophan using the inducer-free promoter. We next coupled the tryptophan-to-indigo and glucose-to-tryptophan pathways to generate a de novo glucose-to-indigo pathway. By rational design and combinatorial screening, we identified the optimal promoter-gene combinations, which underscored the importance of promoter choice and expression levels of pathway genes. We thus created a new E. coli strain that exploited an indole pathway to enhance the indigo titer to 123 mg/L. We further assessed a panel of heterologous tryptophan synthase homologs and identified a plant indole lyase (TaIGL), which along with modified pathway design, improved the indigo titer to 235 mg/L while reducing the tryptophan byproduct accumulation. The optimal E. coli strain expressed 8 genes essential for rewiring carbon flux from glucose to indole and then to indigo: mFMO, ppsA, tktA, trpD, trpC, TaIGL and feedback-resistant aroG and trpE. Fed-batch fermentation in a 3-L bioreactor with glucose feeding further increased the indigo titer (≈965 mg/L) and total quantity (≈2183 mg) at 72 h. This new synthetic glucose-to-indigo pathway enables high-titer indigo production without the need of inducer and holds promise for bio-indigo production.

Optimizing sorbitol double dehydration: A Box-Behnken design approach with commercial sulfonic acid resin

In this study, double dehydration of sorbitol into isosorbide using commercial sulfonic acid resin as a catalyst was carried out under vacuum conditions generated by water ejection. To improve the efficiency and selectivity of the process, optimum reaction conditions prescribed by temperature, catalyst loading, and reaction time were investigated using the Box-Behnken design (BBD) together with Response Surface Methodology (RSM). The results showed that using the water ejection system could increase reaction activity. Statistically, all the reaction parameters were found to significantly affect the double dehydration reaction response, including sorbitol conversion, 1,4-sorbitant yield, and isosorbide yield. Furthermore, accurate predictive equations for all the reaction responses displayed R2 > 95 %, with no significant errors observed. The optimized conditions resulted in the complete conversion of sorbitol with 6.42 % 1,4-sorbitant yield and 67.55 % isosorbide yield. The equations yielded predicted values of the responses with minor variances being lower than 1 % when compared with the experimental values. However, the efficiency of the catalyst decreased steadily over recycling cycle due to reduced active sites and textural properties, likely caused by structural collapse and by-product accumulation. This work contributes to biomass valorization by optimizing the effective process for the production of isosorbide via commercial catalysts under vacuum conditions.

The Effects of Different Doses of Canthaxanthin in the Diet of Laying Hens on Egg Quality, Physical Characteristics, Metabolic Mechanism, and Offspring Health.

Currently, there is a dearth of in-depth analysis and research on the impact of canthaxanthin on the production performance, egg quality, physical characteristics, and offspring health of laying hens. Furthermore, the metabolic mechanism of cantharidin in the body remains unclear. Therefore, to solve the above issues in detail, our study was conducted with a control group (C group), a low-dose canthaxanthin group (L group), and a high-dose canthaxanthin group (H group), each fed for a period of 40 days. Production performance was monitored during the experiment, in which L and H groups showed a significant increase in ADFI. Eggs were collected for quality analysis, revealing no significant differences in qualities except for yolk color (YC). The YC of the C group almost did not change, ranging from 6.08 to 6.20; however, the trend in YC change in other groups showed an initial intense increase, followed by a decrease, and eventually reached dynamic equilibrium. By detecting the content of canthaxanthin in the yolk, the YC change trend was found to be correlated with canthaxanthin levels in the yolk. The content of unsaturated fatty acid increased slightly in L and H groups. Following the incubation period, the physical characteristics and blood biochemical indices of chicks were evaluated. It was observed that the shank color of chicks in the L and H groups was significantly higher than that in the C group at birth. However, by the 35th day, there were no significant differences in shank color among the three groups. Further investigation into the metabolic mechanism involving canthaxanthin revealed that the substance underwent incomplete metabolism upon entering the body, resulting in its accumulation as well as metabolic by-product accumulation in the yolk. In summary, this study highlighted the importance of understanding canthaxanthin's role in production performance, egg quality, and offspring health, providing valuable insights for breeders to optimize feeding strategies.

A Plastic-Crystal Electrolyte Layer Promotes Interfacial Stability of Ni-Rich Oxide Cathode in Li6PS5Cl-Based All-Solid-State Rechargeable Li Batteries.

Unfavorable parasitic reactions between the Ni-rich layered oxide cathode and the sulfide solid electrolyte have plagued the realization of all-solid-state rechargeable Li batteries. The accumulation of inactive by-products (P2Sx, S, POx n- and SOx n-) at the cathode-sulfide interface impedes fast Li-ion transfer, which accounts for sluggish reaction kinetics and significant loss of cathode capacity. Herein, we proposed an easily scalable approach to stabilize the cathode electrochemistry via coating the cathode particles by a uniform, Li+-conductive plastic-crystal electrolyte nanolayer on their surface. The electrolyte, which simply consists of succinonitrile and Li bis(trifluoromethanesulphonyl)imide, serves as an interfacial buffer to effectively suppress the adverse phase transition in highly delithiated cathode materials, and the loss of lattice oxygen and generation of inactive oxygenated by-products at the cathode-sulfide interface. Consequently, an all-solid-state rechargeable Li battery with the modified cathode delivers high specific capacities of 168 mAh g-1 at 0.1 C and a high capacity retention >80 % after 100 cycles. Our work sheds new light on rational design of electrode-electrolyte interface for the next-generation high-energy batteries.

The Role of Microbiota-Related Co-Metabolites in MASLD Progression: A Narrative Review.

Metabolic dysfunction-associated steatotic liver disease (MASLD) represents a growing health concern due to its increasing prevalence worldwide. Metabolic homeostasis encompasses the stable internal conditions vital for efficient metabolism. This equilibrium extends to the intestinal microbiota, whose metabolic activities profoundly influence overall metabolic balance and organ health. The metabolites derived from the gut microbiota metabolism can be defined as microbiota-related co-metabolites. They serve as mediators between the gut microbiota and the host, influencing various physiological processes. The recent redefinition of the term MASLD has highlighted the metabolic dysfunction that characterize the disease. Metabolic dysfunction encompasses a spectrum of abnormalities, including impaired glucose regulation, dyslipidemia, mitochondrial dysfunction, inflammation, and accumulation of toxic byproducts. In addition, MASLD progression has been linked to dysregulation in the gut microbiota and associated co-metabolites. Short-chain fatty acids (SCFAs), hippurate, indole derivatives, branched-chain amino acids (BCAAs), and bile acids (BAs) are among the key co-metabolites implicated in MASLD progression. In this review, we will unravel the relationship between the microbiota-related metabolites which have been associated with MASLD and that could play an important role for developing effective therapeutic interventions for MASLD and related metabolic disorders.

Investigating the association between blood oxidative stress markers and dementia in Egyptian elderly women

BackgroundThe predicted increase in the senior population will have a substantial impact on mental health and dementia development, emphasizing the need to study the biochemical components related to the pathogenesis of dementia. Oxidative stress is caused by an imbalance between the production of reactive oxygen species and the antioxidant balance of the body. The brain is particularly vulnerable to oxidative stress because of the relatively low levels of antioxidants in the brain, high levels of polyunsaturated fatty acids, and increased oxygen needs. The increase of reactive oxygen species leads to the accumulation of protein oxidation by-products which has a key role in dementia pathogenesis. The aim of the study is to investigate the link between oxidative stress and dementia in Egyptian older women and its possible effect on dementia severity and types. A case–control study was conducted involving 40 elderly women with dementia, and another 40 cognitively intact controls. All participants were subjected to a comprehensive geriatric evaluation, which included cognitive assessment, depression screening, and functional assessment. Blood levels of malondialdehyde (an oxidative stress marker), glutathione peroxidase enzyme and total antioxidant capacity (an antioxidant markers) were measured.ResultsMalondialdehyde’s blood level was significantly higher in dementia cases (p < 0.001), indicating a higher oxidative stress status in dementia cases. While blood levels of both glutathione peroxidase enzyme and total antioxidant capacity were significantly lower in dementia cases (p < 0.001), indicating a lower antioxidant activity in dementia cases. We found that glutathione peroxidase enzyme at a cutoff point ≤ 122 mu/ml, total antioxidant capacity at a cutoff point ≤ 39.1 mm/l, and malondialdehyde at a cutoff point > 95 nmol/ml had perfect diagnostic value for identifying patients with dementia.ConclusionOxidative stress showed a significant role in the pathogenesis of dementia, with the presence of higher levels of oxidative damage by-products and lower levels of antioxidant status. So, the role of oxidative stress in dementia should not be neglected, and more effort should be directed to prevent unnecessary exposure to oxidative stress in older adults to contribute towards dementia prevention.

Hydrophobic Two-Dimensional Layered Superstructure of a Polyoxometalate Cluster as the Cathode Material for Aqueous Zinc-Ion Batteries.

Aqueous zinc-ion batteries hold promise for sustainable energy storage, yet challenges in finding high-performance cathode materials persist. Polyoxovanadates (POVs) are emerging as potential candidates due to their structural diversity and robust redox activity. Despite their potential, issues like dissolution in electrolytes, structural degradation, and byproduct accumulation persist. This work introduces a POV-based hydrophobic two-dimensional (2D) layered superstructure that addresses these challenges. The hydrophobic nature minimizes POV dissolution, enhancing structural stability and inhibiting phase transitions during cycling. The 2D arrangement ensures a larger surface area and improved electronic conductivity, resulting in faster kinetics and higher specific capacity. The superstructure demonstrates improved cycle life and an increased operating voltage, marking a significant advancement in POV-based cathode materials for aqueous zinc-ion batteries.

Effect of nonsense-mediated mRNA decay factor SMG9 deficiency on premature aging in zebrafish

SMG9 is an essential component of the nonsense-mediated mRNA decay (NMD) machinery, a quality control mechanism that selectively degrades aberrant transcripts. Mutations in SMG9 are associated with heart and brain malformation syndrome (HBMS). However, the molecular mechanism underlying HBMS remains unclear. We generated smg9 mutant zebrafish (smg9oi7/oi7) that have a lifespan of approximately 6 months or longer, allowing for analysis of the in vivo function of Smg9 in adults in more detail. smg9oi7/oi7 zebrafish display congenital brain abnormalities and reduced cardiac contraction. Additionally, smg9oi7/oi7 zebrafish exhibit a premature aging phenotype. Analysis of NMD target mRNAs shows a trend toward increased mRNA levels in smg9oi7/oi7 zebrafish. Spermidine oxidase (Smox) is increased in smg9oi7/oi7 zebrafish, resulting in the accumulation of byproducts, reactive oxygen species, and acrolein. The accumulation of smox mRNA due to NMD dysregulation caused by Smg9 deficiency leads to increased oxidative stress, resulting in premature aging.