Terrane Research Articles

New results of the U/Pb dating of cretaceous igneous rocks of the Komsomolsk ore district (Middle Amur River area)

The Komsomolsk tin ore district is located at the Miaochan Ridge in the Middle Amur River area (Khabarovsk territory) within the Badzhal accretionary terrane of the Sikhote-Alin orogenic belt. The paper presents new results of U-Pb zircon dating of tonalite of the Miaochan complex of the Silinka granitic pluton (99.7±1.1 Ma) and two rhyolites of the lower part of the Kholdami Formation (98.4±1.0 and 98.7±1.2 Ma) from the north-eastern part of the Komsomolsk district. The geochemical characteristics of rocks were also studied, which show that granitoids of the Miaochan complex are I-type granites, and coeval rhyolites of the Kholdami Formation are very peraluminous S-type rocks. New data on the geochemistry and early Cenomanian age of the igneous rocks allows us to consider the ore-magmatic system of the Komsomolsk ore district as part of the previously identified Albian-Cenomanian igneous province of Pacific Asia.

Growth of the Central Orogenic Belt, North China Craton through accretion of different Neoarchean arc terranes: Perspective from the Linshan complex

The onset of plate tectonics and crustal growth processes in the early Earth have been controversial scientific issues in the geoscience. The North China Craton (NCC) preserves widespread 3.8–2.5 Ga rocks, providing an ideal place to understand early continent formation and evolution. The Linshan complex located in the southern segment of the Central Orogenic Belt (COB) of the NCC, is mainly composed of TTG (tonalite-trondhjemite-granodiorite)-diorite gneisses and metamorphic volcanic-sedimentary units dominated by gabbro, basalt, basaltic andesite and biotite-plagioclase gneiss. Detailed mapping on the scale of 1:100 of a structural transect shows that the Linshan complex has mainly experienced two major deformation events including top-to-the-SE thrust faults and late NE-trending high-angle normal faults. Detailed zircon U-Pb dating shows that gabbro, basaltic andesite, and TTG gneiss mainly formed at ca. 2.52–2.50 Ga. Gabbros and basalts display enrichment of LREE and negative Nb and Ta anomalies, and basaltic andesites display mixed MORB-IAT geochemical affinities. Basalts and basaltic andesites are members of the Nb-enriched basalt series with high absolute Nb contents (>6 ppm). TTG gneisses are geochemically divided into high-pressure and low-pressure TTGs. High-pressure TTGs are characterized by high ratios of La/Ybcn (26.29–45.73) and fall into the adakitic region in the La/Ybcn-Ybcn diagram. Considering the close contact with Nb-enriched basaltic series, it is proposed that high-pressure TTGs may have formed by partial melting of a subducting oceanic slab with garnet and amphibole and/or rutile as residues. Low-pressure TTGs are characterized by low ratios of La/Ybcn and Sr/Y with marked negative Eu anomalies, indicating partial melting at shallow crustal levels. Regional tectonic relations have defined the Neoarchean Dengfeng island arc-forearc accretionary complex to the east of the Linshan complex. Thus, we propose that the gabbros-basalts-basaltic andesites in the Linshan complex mostly formed in a Neoarchean suprasubduction back-arc basin by rifting of a TTG-dominated island arc terrane. The final closure of the back-arc basin resulted in their tectonic juxtaposition forming thrust-imbricated structures. There may have been several Neoarchean “forearc-island-arc-backarc” systems in the NCC that are similar to modern accretionary tectonic orogens, indicating that plate tectonics has been in operation since at least 2.55–2.50 Ga.

THE CRUSTAL THICKNESS AND Vp/Vs RATIO IN MONGOLIA

Crustal thickness beneath Mongolia was determined using the teleseismic receiver function H-k stacking method, which employed waveform data from broadband seismic stations in Mongolia. The findings reveal that the crust of Mongolia thickens from east to west, with the thickness reaching 63 km in west Mongolia and 35.9 km in east Mongolia. In the central part of Mongolia, the average thickness of the crust is approximately 45 km. The characteristics of P-to-S converted phases and negative amplitudes in stacked receiver functions, may be attributed to regional tectonostratigraphic terranes in Mongolia. Subsequently, a general map of the crustal thickness of Mongolia was generated by combining the results of this study with those of other seismological studies and the CRUST1.0 model of the Earth’s crust.

Tectonic structures of the Dome Fuji region, East Antarctica, based on new magnetic data

The Oldest Ice Reconnaissance (OIR) airborne geophysical survey in East Antarctica was flown over approximately 170,000 km2 of the Dome Fuji region in 2016/17. The survey’s results support new insights into the subglacial geology and its meaning for the tectonic histories of the supercontinents Rodinia and Gondwana. The new magnetic and radar-derived bed topography data are integrated with previously acquired magnetic and gravity data, allowing the mapping of crustal domains within and beyond the survey’s limits. The magnetic data reveal three distinct domains within the survey region, delineated by N–S oriented boundaries, partly aligned with gravity domains following upward continuation transformations for both datasets. Additionally, four primary sets of magnetic lineaments were identified, exhibiting correlations with topographic and gravity patterns. These correlations indicate the continuation of the Tonian Oceanic Arc Super Terrane (TOAST) southward of its previously known southern limit. Moreover, an E–W-trending magnetic anomaly, the Elbert magnetic anomaly, suggests the suture between the recently-proposed subglacial Valkyrie craton and the TOAST. Furthermore, the analysis reveals a broad scale shear zone, named here the OIR shear zone, which formed as a result of oblique collision of the Ruker and Valkyrie cratons during the amalgamation of Gondwana.

Tectonostratigraphic evolution of a marginal basin during the transition from arc collision to subduction: The case of the northern Pacific forearc of Colombia

The forearc of the northern Pacific region of Colombia (Atrato basin) initially formed in an intra-oceanic setting related to the Central American arc, and its sedimentary record provides a unique opportunity to study the evolution of source-to-sink systems during the transition from arc collision to subduction. Intracrustal weaknesses, and the highly oblique approach to the continental South American paleomargin, favored an initial soft collision of the island arc and associated marginal basins during the Early Miocene. This is suggested by the lack of widespread deformation in the collisional front and the accumulation of hemipelagic rocks with little terrestrial input, sourced by the colliding arc and the continental paleomargin. A regional unconformity associated with a shift toward terrigenous deposition is attributed to a harder collision and subsequent buoyancy-driven uplift of the oceanic terrane ca. 15−13 Ma. The final docking of the oceanic arc and related basins to the continent and coeval surface uplift near the suture zone ca. 12−7 Ma marked the transition from collision to subduction and the establishment of the Atrato basin as a continental forearc. This was accompanied by postcollisional arc magmatism, shallowing of accumulation depths to nearshore conditions, and a dramatic decrease in the sediment contribution of the continental paleomargin. Subsequent shallow subduction of the Coiba microplate caused the Late Miocene uplift of the coastal Baudó Range and the fragmentation of the Atrato basin into inner and outer (coastal) segments. This episode drove a shift from predominantly transverse to longitudinal drainage systems and the final transition from marine to terrestrial settings in northwestern Colombia.

Seismic and Potential Field Constraints on Upper Crustal Architecture of Inner Bering Shelf, Offshore Southwestern Alaska

Southwestern Alaska encompasses a group of fault-bounded tectonostratigraphic terranes that were accreted to North America during the Mesozoic and Paleogene. To characterize the offshore extension of these terranes and several significant faults identified onshore, we reprocessed three intersecting multichannel deep seismic reflection profiles totaling ∼750 line-km that were shot by the R/V Ewing across part of the inner Bering continental shelf in 1994. Since the uppermost seismic section is often contaminated by high amplitude water layer multiples from the hard and shallow seafloor, the migrated reflection images are supplemented with high-resolution P wave velocity models derived by traveltime tomography of the recorded first-arrivals to depths of up to 2000 m. Additionally, other geophysical datasets such as seismicity, well logs, high resolution satellite-altimetry gravity, air-borne magnetics, ship-board gravity and magnetics, are also incorporated into an integrated regional interpretation. We delineate the offshore extension of the major mapped geological elements, including the Togiak fault (TGF), East Kulukak fault (EKF), Chilchitna fault (CF), Lake Clark fault (LCF), Togiak terrane (TT), Goodnews terrane (GT), Peninsular terrane (PT), Northern Kahiltna flysch (NKF) and Southern Kahiltna flysch (SKF) deposits, and the regional suture zone. The geophysical evidence from this study suggest that the major faults and terrane boundaries of southwestern Alaska, excluding the LCF, not only extend beneath the Bering shelf offshore but also appear to rotate, forming a trend parallel to the inactive Beringian margin. The LCF extends offshore but likely terminates in the northeastern part of the Bristol Bay basin. Additionally, the constraints from seismicity data indicates that while the major faults in southwestern Alaska exihibit some activity onshore, they remain dormant in the offshore region. These new findings will contribute to a better understanding of terrane accretion processes and existing fault models of southwestern Alaska.

The interplay of detrital modes and depositional facies on diagenesis and petrophysics of deep-marine Miocene sandstones (Cilento Group), Southern Apennines, Italy

The Cilento Group (Langhian-to-Tortonian) is a thick turbiditic succession of the Southern Apennines foreland region that unconformably overlain the Lucanian oceanic terranes. The San Mauro Formation (SMF) form the uppermost portions of the Cilento Group, and consists of 1400–1600 m thick turbiditic succession including quartzolithic, volcanolithic, and quartzofeldspathic sandstones with several carbonatoclastic layers interbedded, passing upward from distal-to proximal-facies associations. Here, based on the vertical changes of texture and petrology in the succession, the SMF was divided in two main sections. The key depositional features and the main post-depositional processes, of lower- and upper-part of SMF, are compared with the most significant petrophysical properties with the purpose to elucidate the major controls on the porosity and permeability evolution during burial. With this aim, fifty-four thin sections were petrographically investigated, while mercury intrusion analysis was performed on twenty-four samples. Compaction, cementation, dissolution and fracturing occurred in the SMF, altering porosity and permeability. The main authigenic minerals are: 1) carbonates, mainly calcite and less dolomite, dominantly occurring as replacement of framework grains; 2) Phyllosilicates, mainly developing in the upper part of SMF as pore-filling cement or as small and incomplete grain coatings; 3) Fe-oxides occurring as coatings or localized crystals. The relationship between the compactional porosity loss (COPL) and the cementational porosity loss (CEPL) testifies the primary role of compaction in decreasing porosity, reducing the intergranular volume (IGV) to 11.1% in the lower SMF and to 16.7 % in the upper SMF. The coarse upper SMF samples exhibit lower mean porosity and permeability (6 % and 215 mD, respectively) than the fine lower SMF samples (9.2 % and 774.2 mD, respectively). In the upper section of SMF, a comparatively more widespread pore-filling cementation and the abundant detrital matrix affect depositional intergranular porosity, reducing the pore size and interconnectivity. Moreover, the higher amount of rigid grains (petrofacies dependent) and their brittle deformation produce an intricate fragmentation and micro-fracturing system, altering pores geometry and affecting permeability. On the contrary in the lower SMF, ductile components suffer compaction more than rigid ones, leading the lowest IGV. In addition, a higher volume of authigenic carbonates occur as replacement on framework components, hence playing a minor occluding role and less affecting the pore system. Composition and tectonics rule the effects of diagenetic processes in the San Mauro turbiditic succession, following the vertical evolution of depositional facies association and petrology.

Constraints on Growth and Stabilization of the Western Superior Craton From Inversion of Magnetotelluric Data

AbstractA data set consisting of 376 broadband and long‐period MT measurements was used to generate the first ever 3D resistivity model of the Archean western Superior Craton. The modeled resistivity structure is compared to coincident seismic reflection data. The observed geophysical signatures are interpreted within the context of the late stages of crustal growth and cratonization of the region via the progressive accretion of terranes against the initial cratonic core. The northern‐most terranes comprising the cratonic core exhibit a nearly homogenous highly resistive crust. The lower crust of the southern terranes contains largely continuous low resistivity bands which run subparallel to major terrane boundaries and corresponding fault systems. In some cases, low resistivity features are coincident with dense packages of sub‐horizontal to listric reflections within the mid‐ to lower crust. These resistivity structures are inferred to represent preserved geoelectric signatures of late to post‐orogenic magmatic pulses likely related to delamination of locally overthickened crust. Increased mantle heat flow resulted in partial melting of the lower crust and upper mantle and upward migration of CO2‐rich melts and fluids through crustal weak zones corresponding to shear and/or suture zones formed during terrane amalgamation. Thermal softening of the mid‐ to lower crust led to orogenic collapse and reactivation of the crustal shear zones, resulting in formation and interconnection of graphitic films which were preserved within the stable craton. These results have implications for the tectono‐magmatic history of the western Superior Craton, as well toward the understanding of the geodynamic regime of the Archean Earth.

Early Paleozoic accretionary history of the Pearya terrane: New insights from igneous and detrital zircon signatures of the Kulutingwak Formation, Ellesmere Island, Nunavut, Canada

The juxtaposition of the composite Pearya terrane and the northern Laurentian margin at Ellesmere Island, Nunavut, Canada, has significant ramifications for the Paleozoic tectonic history of the circum-Arctic region. Published tectonic models rely upon interpretation of the subduction-related Kulutingwak Formation as an indicator of Ordovician and/or Silurian accretion (Trettin, 1998). New igneous and detrital zircon U-Pb and Lu-Hf isotopic data from 16 samples collected in the Yelverton Inlet–Kulutingwak Fiord region of northern Ellesmere Island suggest that the Kulutingwak Formation of Trettin (1998) contains structural blocks derived from both the Pearya terrane and Silurian strata associated with the ancestral Laurentian margin. Data from this study demonstrate a complex provenance history for rocks within the Petersen Bay, Kulutingwak Fiord, and Emma Fiord fault zones, with age probability peaks of ca. 470 Ma, 650 Ma, and 960–980 Ma that suggest affinity with the Pearya terrane, and age probability peaks of ca. 1800 Ma and 2700 Ma that indicate connections to the Laurentian margin. The combination of these signatures in Kulutingwak Formation rocks suggests that the Pearya terrane was proximal to the northern Laurentian margin by Late Ordovician time. Silurian and younger strike-slip displacement on the major fault zones resulted in the incorporation of blocks derived from the Pearya terrane basement and Silurian clastic rocks into the Kulutingwak Formation. Silurian displacement along these strike-slip faults, which are integral components of the Canadian Arctic transform system, is recorded by syndepositional deformation structures in the Danish River Formation and prevented the transition from soft to hard collision of the Pearya terrane. The two-stage model for the Pearya terrane—accretion followed by significant translation—provides a process for developing complex steep terrane boundaries with contentious displacement histories that are common in accretionary orogens.

Systematics and biogeography of a Sunda-Papuan snake lineage (Natricidae: Tropidonophis Jan 1863)

Abstract Sunda-Papuan keelback snakes (Serpentes: Natricidae: Tropidonophis Jan 1863) include 20 species distributed from the Philippines south-east through the Moluccas to New Guinea and Australia. Diversity of this insular snake lineage peaks on the island of New Guinea. Previous phylogenetic studies incorporating Tropidonophis have been limited to multi-locus Sanger-sequenced datasets with broad squamate or family-level focus. We used a targeted-sequence capture approach to sequence thousands of nuclear ultraconserved elements (UCEs) to construct the most comprehensive sequence-based phylogenetic hypothesis for this genus and estimate ancestral biogeography. Phylogenies indicate the genus is monophyletic given recent taxonomic reassignment of Rhabdophis spilogaster to Tropidonophis. All UCE phylogenies recovered a monophyletic Tropidonophis with reciprocally monophyletic Philippine and New Guinean clades. Divergence dating and ancestral range estimation suggest dispersal to New Guinea from the Philippines to have occurred during the Mid-Miocene via the Oceanic Arc Terranes. From Late Miocene into the Pliocene the genus experienced rapid diversification from orogeny of the New Guinean Central Cordillera from Oceanic Arc Terrane accretion on the northern boundary of the Sahul Shelf. Future collecting of missing taxa from the Moluccas and Indonesian Papua will better the understanding of non-volant faunal biogeography and diversification in this tectonically complex Pacific arena.

Sedimentary protolith and high-P metamorphism of oxidized manganiferous quartzite from the Lanterman Range, northern Victoria Land, Antarctica

Abstract. We investigated the mineral assemblage, mineral and bulk-rock chemistry, and zircon U–Pb age of a manganiferous quartzite layer in the Lanterman Range, northern Victoria Land, Antarctica. The mineral assemblage consists primarily of phengite and quartz, along with spessartine-rich garnet, Mn3+ and rare earth element–yttrium (REY)-zoned epidote-group minerals, and titanohematite. Mineral inclusions such as tephroite, rutile and pyrophanite are hosted in porphyroblasts of the latter three minerals and suggest prograde blueschist-facies to low-T eclogite-facies metamorphism (M1). Epidote-group minerals commonly exhibit multiple growth zones of piemontite and/or epidote (M1), REY-rich piemontite (M2), REY-rich epidote (M3), and epidote (M4) from core to rim. Pseudobinary fO2–X diagrams at constant P–T support the stability of an epidote-group mineral-bearing assemblage under highly oxidized conditions during prograde M2 to peak M3 metamorphism. In marked contrast, tephroite-bearing assemblages (M1) are limited to relatively reduced environments and Mn-rich, silica-deficient bulk-rock compositions. Mn nodules have such characteristics, and the contribution of this hydrogenous component is inferred from bulk-rock chemical features such as a strong positive Ce anomaly. The major-element composition of the manganiferous quartzite suggests a protolith primarily consisting of a mixture of chert and pelagic clay. The presence of rare detrital zircons supports terrigenous input from a craton and constrains the maximum time of deposition to be ca. 546 Ma. The lack of arc-derived detrital zircons in the quartzite and the predominance of siliciclastic metasedimentary rocks among the surrounding rocks suggest that the deep-sea protolith was most likely deposited in an arc/back-arc setting at a continental margin. High-P metamorphism associated with terrane accretion during the Ross orogeny took place in the middle Cambrian (ca. 506 Ma), broadly coeval with the metamorphic peak recorded in the associated high-P rocks such as mafic eclogites. Finally, it is noteworthy that the high-P manganiferous quartzite was amenable to exhumation because the paleo-position of the protolith was likely distal from the leading edge of the downgoing slab.

Late Jurassic to early Cretaceous radiolarian faunas from Changku, Gyangze, southern Tibet: Implications for the evolution of the Neo-Tethys

Radiolarians found in siliceous sediments within the Yarlung-Tsangpo Suture Zone in southern Tibet contain valuable geochronological and tectonic information for the evolution of the Neo-Tethys. Radiolarians, as the main microfossils contained in radiolarian cherts, are commonly used to determine the age of the chert. The study of radiolarian biostratigraphy is crucial in interpreting the tectonic nature of associated oceanic terranes, which can aid in restoring the evolution of the Neo-Tethys. A large number of poorly to well-preserved radiolarian fossils were recovered from a chert block near Changku, Gyangze, in southern Tibet. A total of 57 species attributed to 36 genera have been identified from eight productive samples. Four radiolarian assemblages have been identified by comparison with established radiolarian zones of the Neo-Tethyan realm and have been precisely dated to the late Kimmeridgian to earliest Hauterivian. The origin of the exotic blocks in the Zongzhuo Formation has been subject to different interpretations, and the chert block near Changku should be of tectonic origin.

Constraining the exhumation history of the northwestern margin of Tibet with a comparison to the adjacent Pamir

Regional variations in the evolution of the Tibetan Plateau have important implications for our understanding of crustal deformation processes. There have been few studies of the evolution of the NW margin of the plateau and its transition to the Pamir Mountains to the west. We focus on this region with a multi-technique detrital study of two sedimentary sections in the Tarim Basin. Our provenance data show that an appreciable component of the detrital material in the sedimentary sections was derived from the Songpan-Ganzi–Tianshuihai composite terrane, with some contribution from the Karakoram and/or West Qiangtang. Given the proximity of the West Kunlun terrane to the sedimentary sections under study, and its long history of exhumation, this terrane in all likelihood also contributed to the studied successions. Our thermochronological data record phases of exhumation in the hinterland in the Triassic, Early Cretaceous and Oligo-Miocene. Similar to the Pamir Mountains, the Triassic and Oligo-Miocene periods of exhumation are attributed to the Cimmerian and Himalayan orogenies, respectively. The Early Cretaceous signal may reflect the distal effects of the Lhasa–Qiangtang collision. Coevality with deformation in the Pamir Mountains suggests a coupled geodynamic system, with retro-arc deformation associated with Neotethyan subduction in the west and terrane accretion in the east. Supplementary material: Detailed analytical method, sample information, petrographic, geochronological and low-temperature thermochronological data are available at https://doi.org/10.6084/m9.figshare.c.7040686

Tectono-Metamorphic Evolution of the Cretaceous Kluane Schist, Southwest Yukon

Abstract A wealth of information regarding the Mesozoic evolution of the Northern Canadian and Alaskan Cordillera is held within a series of variably metamorphosed and deformed rocks that formed in Jura-Cretaceous basins. Located at the interface between the pericratonic Intermontane and exotic Insular terranes, these basinal rocks are key to understanding the timing and tectonic style of Insular terrane accretion, a topic of longstanding debate. This study unravels the structural and metamorphic evolution of one of these basins, the Kluane Basin, within southwest Yukon Territory. The Kluane Schist is the primary assemblage of the Kluane Basin. It consists of metamorphosed and deformed low-Al pelites that were intruded by granodioritic plutons of the Paleocene Ruby Range batholith. Previous workers have suggested the variable metamorphic character of the Kluane Schist represents an extensive and static thermal aureole related to Ruby Range batholith emplacement. Our work, however, indicates that the Kluane Schist experienced Buchan-style metamorphism coeval with protracted deformation and can be divided into seven distinct petrologic zones, which, based on their unique combination of mineral assemblage and structure, are incompatible with static thermal metamorphism. Instead, we propose the Kluane Schist experienced two distinct metamorphic phases: (1) an early greenschist-facies phase that resulted in the development of a bedding-parallel chlorite-muscovite-titanite fabric, preserved by its lowest-grade units, and (2) a later amphibolite-facies phase that manifests as the progressive transposition of the earlier chlorite-muscovite-titanite fabric into a penetrative biotite-rich schistosity that transitions upgrade into a segregated gneissic fabric comprised of biotite-cordierite and plagioclase-quartz (± sillimanite-K-feldspar-melt). By integrating the results of detailed petrography and petrological modeling, we demonstrate that the second main metamorphic phase experienced by the Kluane Schist preserves a record of pressures and temperatures that align with other Buchan-style terranes worldwide. Our data defines a field gradient across the Kluane Schist ranging from 3.0–3.5 kbar at 375–400 °C to 4–4.5 kbar at 700–750 °C. This record of a coupled Buchan-style metamorphic-deformational evolution and tops-to-the SW non-coaxial shear structures is consistent with the override of the thermally mature Yukon-Tanana terrane as the principal driver of Kluane Schist metamorphism, with some limited heat likely contributed by the late-syn- to post-tectonic intrusion of the Ruby Range batholith.

Correlations on the southern Kaapvaal Craton Margin, 1: Ventersdorp lavas transgressed the Doornberg lineament

Abstract Two small exposures of quartz-porphyritic rocks occur on the farm Zoutpekel 98 in the Marydale Terrane between the Doornberg Fault and Brakbos Shear Zone, apparently overlying Kaapvaal basement granite but lacking clear field relationships due to sand and Dwyka tillite cover. They are lavas and tuffs, metamorphosed in lower amphibolite facies. They contain quartz phenocrysts with a distinctive blue colour, due to metamorphic exsolution of rutile. Microbeam U-Pb zircon dating gives a combined 207Pb/206Pb age of 2 722 ± 3 Ma (seven determinations on four samples), interpreted as the age of extrusion. Three of these samples give the same discordia upper intercept age, but one sample gives discordia intercepts of 2 688 ± 15 and 1 223 ± 120 Ma, thought to reflect metamorphic lead loss related to the ~1 210 Ma Namaqua terrane assembly collisions. The Zoutpekel exposures are coeval with the 2 720 ± 2 Ma Makwassie Formation of the Platberg Group, Ventersdorp Supergroup. They also correspond geochemically to the Makwassie Formation and no other unit of the supergroup. A sample from the T’kuip Formation of the nearest Ventersdorp Supergroup inlier on the Kaapvaal Craton (east of the Doornberg Fault), gives an age of 2 716 ± 8 Ma, also confirming its lithostratigraphic and geochemical correlation with the Makwassie Formation. The Zoutpekel exposures show that not only the Kaapvaal basement granites, but also the supracrustal cover rocks of the Ventersdorp Supergroup, extend southwards across the Doornberg Fault, The Marydale Terrane is thus not an exotic terrane, but probably represents a passive continental margin developed at the beginning of the 1 300 to 1 000 Ma Namaqua-Natal Wilson cycle. The age range of the Ventersdorp Supergroup and the age and stratigraphic correlation of the Marydale Group thrust complex, which straddles the Zoutpekel exposures, will be investigated in two companion papers.

Lithospheric mantle as a metal storage reservoir for orogenic gold deposits in active continental margins: Evidence from Hg isotopes

Abstract The subcontinental lithospheric mantle (SCLM) is now suggested by many workers to play a role in the formation of orogenic gold deposits in active continental margins, given that the gold and volatiles may be introduced into the SCLM during plate subduction. The giant Cretaceous Jiaodong gold province within the North China block occurs in a convergent margin setting where there is no terrane accretion, thus eliminating from consideration the commonly accepted metal and fluid source reservoir for orogenic gold—the metamorphosed upper crust of an active orogenic belt. Thus, the auriferous fluids were released below the high-grade Archean cratonic rocks from either enriched SCLM or directly from the subducted oceanic slab. Mercury (Hg) isotopes allow fingerprinting of isotopically distinct reservoirs, discriminating between the two possibilities. We present Hg isotope data for a set of pyrite grains, native gold, and lamprophyres from six main gold districts in the Jiaodong gold province. These samples dominantly yielded near-zero Δ199Hg (0‰ ± 0.1‰), within uncertainty of the mantle Δ199Hg value. The results provide novel evidence that the SCLM predominantly controlled the Hg budget of the Jiaodong gold deposits, implying that the SCLM acted as a buffer for the crustal mass-independent fractionation Hg signatures and a storage reservoir for gold and volatiles. Consequently, during slab subduction, gold and volatiles were recycled and stored within the SCLM and were later released from the mantle during uplift and relaxation of compressional tectonics.

Tectonic Evolution of the Condrey Mountain Schist: An Intact Record of Late Jurassic to Early Cretaceous Franciscan Subduction and Underplating

AbstractThe Klamath Mountains in northern California and southern Oregon are thought to record 200+ m.y. of subduction and terrane accretion, whereas the outboard Franciscan Complex records ocean‐continent subduction along the North American margin. Unraveling the Klamath Mountains' Late Jurassic history could help constrain this transition in subduction style. Key is the Mesozoic Condrey Mountain Schist (CMS), comprising, in part, a subduction complex that occupies a structural window through older, overlying central Klamath thrust sheets but with otherwise uncertain relationships to more outboard Klamath or Franciscan terranes. The CMS consists of two units (upper and lower), which could be correlated with (a) other Klamath terranes, (b) the Franciscan, or (c) neither based on regional structures and limited extant age data. Upper CMS protolith and metamorphic dates overlap with other Klamath terranes, but the lower CMS remains enigmatic. We used multiple geochronometers to constrain the timing of lower CMS deposition and metamorphism. Maximum depositional ages (MDAs) derived from detrital zircon geochronology of metasedimentary rocks are 153–135 Ma. Metamorphic ages from white mica K‐Ar and Rb‐Sr multi‐mineral isochrons from intercalated and coherently deformed metamafic lenses are 133–116 Ma. Lower CMS MDAs (<153 Ma) predominantly postdate other Klamath terrane ages, but subduction metamorphism appears to start before the earliest coherent Franciscan underplating (ca. 123 Ma). The lower CMS thus occupies a spatial and temporal position between the Klamath Mountains and Franciscan and preserves a non‐retrogressed record of the Franciscan Complex's early history (>123 Ma), otherwise only partially preserved in retrogressed Franciscan high grade blocks.

Terrane Collision‐Induced Subduction Initiation: Mode Selection and Implications for Western Pacific Subduction System

AbstractIn the regime of plate tectonics, the subduction of an oceanic plate generally terminates with the collision and accretion of continental terranes. Then, a new subduction zone may form in the neighboring oceanic plates, which is defined as the terrane collision‐induced subduction initiation (SI). Based on the analyses of the western Pacific subduction system in the Cenozoic, three types of collision‐induced SI have been observed: subduction polarity reversal, subduction transference and far‐field subduction. However, the dynamics and controlling factors of SI mode selection after terrane collision are not clear. In this study, a multi‐terrane collision model has been conducted with variable rheological strength of continental terranes and different convergence velocities. The model results indicate that the relative strength of the terranes controls the SI mode selection, with the new subduction zone tending to form beneath weaker terranes. In addition, the higher convergence velocity can facilitate the collision‐induced SI. An analytical study of force balance has been further conducted, which provides a mechanical explanation for the numerical prediction of a weak overriding terrane as a favorable SI site. The numerical models and force balance analyses are further compared with the natural cases in the western Pacific subduction system. This indicates that subduction polarity reversal is the most favorable mode after terrane collision in the western Pacific, possibly due to the weakness of overriding plate during the preceding subduction‐induced fluid/melt activity. This comprehensive study provides systematic constraints for the dynamics of collision‐induced subduction jump, especially for the western Pacific subduction zones in the Cenozoic.

A contribution to the understanding of the origin of the Ginebra Gold District mineralizations, Colombia

Ginebra´s gold mineralization is hosted by the Ginebra Ophiolitic Massif and the Buga Batholith, in the western flank of the Central Cordillera of Colombia. Gold occurs as disseminations, quartz-carbonate stockwork veinlets and quartz lodes with a strong structural control and are composed by small amounts of sulfides, mostly pyrite, with galena, sphalerite and chalcopyrite in at least two different deposition events and related to strong sericite-chlorite-epidote haloes, indicative of near-neutral and reduced fluids. Petrography and Raman spectroscopy allowed to identify two main fluid inclusions assemblages primary to pseudo-secondary in origin, both of them aqueous and CO2-rich, with variable N2. Microthermometric analysis indicates the hydrothermal fluids associated with the gold were low saline (0.75-6.22 wt% NaCl equiv.) and presented a minimum trapping temperature ranging from 237.4 to 301.6°C. Petrography and microthermometric results suggest an isothermal fluid mixing and/or H2S loss as the main mechanisms related to gold bi-sulfide/thio-sulfide complexes destabilization and precipitation. Sulfur isotopes indicates a close to zero range (-8.2-+4.8‰), suggesting a restricted fluid circulation through the magmatic rocks of the Buga Batholith and the Ginebra Ophiolitic Massif. Besides, the oxygen and deuterium isotopes from hydrothermal sericite and chlorite accompanying to gold events, indicates a metamorphic origin for the hydrothermal fluids. 40Ar-39Ar dating of the hydrothermal alteration haloes, from El Retiro and La Esperanza, indicates a late Cretaceous-Paleocene age, between 67 and 65 Ma, contemporaneous with a regional strong dextral transpressive deformation related to subduction to obduction and exotic terrane accretion against the north-western part of the South American Plate. Although the hydrothermal fluid characteristics of the Ginebra Gold Disctrict are compatible with both the Intrusion-Related and Orogenic Gold deposit types, the metamorphic nature of the hydrothermal fluids and the tectonic regime at the time of mineralization event, allow us to propose they are compatible with an Orogenic Gold deposit.

Evolution, Modification, and Deformation of Continental Lithosphere: Insights from the Eastern Margin of North America

Continental lithosphere is deformed, destroyed, or otherwise modified in several ways. Processes that modify the lithosphere include subduction, terrane accretion, orogenesis, rifting, volcanism/magmatism, lithospheric loss or delamination, small-scale or edge-driven convection, and plume-lithosphere interaction. The eastern North American margin (ENAM) provides an exceptional locale to study this broad suite of processes, having undergone multiple complete Wilson cycles of supercontinent formation and dispersal, along with ∼200 Ma of postrift evolution. Moreover, recent data collection efforts associated with EarthScope, GeoPRISMS, and related projects have led to a wealth of new observations in eastern North America. Here I highlight recent advances in our understanding of the structure of the continental lithosphere beneath eastern North America and the processes that have modified it through geologic time, with a focus on recent geophysical imaging that has illuminated the lithosphere in unprecedented detail. ▪Eastern North America experienced a range of processes that deform, destroy, or modify continental lithosphere, providing new insights into how lithosphere evolves through time.▪Subduction and terrane accretion, continental rifting, and postrift evolution have all played a role in shaping lithospheric structure beneath eastern North America.▪Relict structures from past tectonic events are well-preserved in ENAM lithosphere; however, lithospheric modification that postdates the breakup of Pangea has also been significant.