Acanthamoeba Myosin Research Articles

Direct photoaffinity labeling of gizzard myosin with [3H]uridine diphosphate places Glu185 of the heavy chain at the active site.

The active site of chicken gizzard myosin was labeled by direct photoaffinity labeling with [3H]UDP. [3H] UDP was stably trapped at the active site by addition of vanadate (Vi) and Co2+. The extraordinary stability of the myosin.Co2+.[3H]UDP.Vi complex (t1/2 greater than 5 days at 0 degrees C) allowed it to be purified free of extraneous [3H]UDP before irradiation began. Upon UV irradiation, greater than 60% of the trapped [3H]UDP was photoincorporated into the active site. Only the 200-kDa heavy chain was labeled, confirming earlier results (Maruta, H., and Korn, E. (1981) J. Biol. Chem. 256, 499-502) using [3H]UTP. Extensive tryptic digestion of photolabeled myosin subfragment 1 followed by high performance liquid chromatography separations and removal of nucleotide phosphates by treatment with alkaline phosphatase allowed two labeled peptides to be isolated. Sequencing of the labeled peptides and radioactive counting showed that Glu185 was the residue labeled. Since UDP is a "zero-length" cross-linker, Glu185 is located at the purine-binding pocket of the active site of smooth myosin and adjacent to the glycine-rich loop which binds the polyphosphate portion of ATP. This Glu residue is conserved in smooth and nonmuscle myosins and is the same residue identified previously by [3H]UTP photolabeling in Acanthamoeba myosin II (Atkinson, M. A., Robinson, E. A., Appella, E., and Korn, E. D. (1986) J. Biol. Chem. 261, 1844-1848).

A new Acanthamoeba myosin heavy chain. Cloning of the gene and immunological identification of the polypeptide

An Acanthamoeba myosin heavy chain has been identified whose tail domain amino acid sequence distinguishes it from Acanthamoeba myosins IB, IC, and II. The gene for this novel myosin heavy chain spans approximately 6.8 kilobases, is split by 17 introns, and encodes a 177-kDa polypeptide. While the amino-terminal approximately 90 kDa of this polypeptide is highly similar to the globular head sequences of myosins I and II, its approximately 87-kDa tail domain shows essentially no similarity to the tail sequences of either type of myosin. The only exception to this is the carboxyl-terminal approximately 50-amino acid region of the polypeptide, which is homologous to the carboxyl termini of the myosins I. Interestingly, this approximately 50-residue segment has been shown to exist in a diverse family of cytoskeleton-associated proteins that include nonreceptor tyrosine kinases, phospholipase C gamma, and fodrin (Rodaway, A. R. F., Sternberg, M. J. E., and Bentley, D. L. (1989) Nature 342, 624). Sequence analysis indicates that the tail domain of this new myosin is incapable of forming a myosin II-like coiled-coil structure, implying that the protein is single-headed and nonfilamentous. For this reason we have tentatively classified it as a high molecular weight form of myosin I (HMWMI). To determine if HMWMI exists in cells, antiserum was raised against a bacterially expressed fusion peptide made using a cDNA clone encoding most of the unique HMWMI tail domain. This antiserum does not recognize Acanthamoeba myosins IB, IC, or II but does recognize a single polypeptide in whole cell extracts with the mobility predicted for the HMWMI heavy chain. This protein is precipitated from crude extracts using F-actin and released from the pellet by ATP, supporting its classification as a member of the myosin family of proteins.

Localization of myosin IC and myosin II in Acanthamoeba castellanii by indirect immunofluorescence and immunogold electron microscopy.

Polyclonal antisera have been raised against purified Acanthamoeba myosin II and to a synthetic 26 amino acid peptide that corresponds in sequence to the phosphorylation site of Acanthamoeba myosin IC. These antisera are specific for their respective antigens as determined by immunoblotting after SDS-PAGE of total cell lysates. By using the antisera, localization studies were performed by indirect immunofluorescence and by immunogold electron microscopy. Myosin II occurred in the cell cytoplasm and appeared to be concentrated in the cortex. Immunogold cytochemistry revealed at high resolution that myosin II is organized into rodlike filaments approximately 200 nm long. The antibody raised against the myosin IC synthetic peptide recognized both the plasma membrane and the membrane of the contractile vacuole. The plasma membrane staining was labile to treatment with saponin suggesting an intimate association of the myosin IC with membrane phospholipids. Immunogold cytochemistry with the antimyosin IC synthetic peptide showed that the myosin IC is closely associated with the membrane bilayer.

Substrate specificity of Acanthamoeba myosin I heavy chain kinase as determined with synthetic peptides.

Phosphorylation of a single threonine (myosin IA) or serine (myosins IB and IC) in the heavy chains of the Acanthamoeba myosin I isozymes is required for expression of their actin-activated Mg2(+)-ATPase activities. We now report that the synthetic peptide Gly-Arg-Gly-Arg-Ser-Ser-Val-Tyr-Ser, which corresponds to the phosphorylated region of Acanthamoeba myosin IC, is a good substrate for myosin I heavy chain kinase: Km = 54 microM, and Vmax = 15 mumols/min.mg. The same serine is phosphorylated as in the native substrate (residue 6 in the above sequence), and kinase activity with the synthetic peptide as substrate is also stimulated by phosphatidylserine-enhanced autophosphorylation of the kinase. These results indicate that all of the essential sequence determinants of kinase specificity are contained within this 9-residue peptide. With the peptide as substrate, we found that another acidic phospholipid, phosphatidylinositol, also enhances autophosphorylation of the kinase whereas the neutral phospholipids phosphatidylcholine and phosphatidylethanolamine do not. By comparing the Km and Vmax values for a series of synthetic peptide substrates, we established that 1 basic amino acid is essential on the NH2-terminal side of the phosphorylation site, and two are preferable, and that a tyrosine is essential 2 residues away on the COOH-terminal side. There is a slight preference for arginines over lysines. All of these local sequence specificity determinants are present in the three native substrates, Acanthamoeba myosins IA, IB, and IC, and in two Dictyostelium myosin I isozymes that are putative substrates for the kinase. Similar sequences do not occur in the myosins I from intestinal brush border, which is not a substrate for the Acanthamoeba kinase.

Regulation of the actin-activated ATPase activity of Acanthamoeba myosin II by copolymerization with phosphorylated and dephosphorylated peptides derived from the carboxyl-terminal end of the heavy chain.

Myosin II from Acanthamoeba castellanii is a conventional myosin composed of two heavy chains and two pairs of light chains. The amino-terminal approximately 90 kDa of each heavy chain form a globular head that contains the ATPase site and an ATP-sensitive actin-binding site. The carboxyl-terminal approximately 80 kDa of both heavy chains interact to form a coiled coil, helical rod (through which the molecules self-associate into bipolar filaments) ending in a short nonhelical tailpiece. Phosphorylation of 3 serine residues at the tip of the tail (at positions 11, 16, and 21 from the carboxyl terminus) inactivates the actin-activated Mg2(+)-ATPase activity of myosin II filaments. Previous work had indicated that the activity of each myosin II molecule in a filament reflects the global state of phosphorylation of the filament rather than the phosphorylation state of the molecule itself. We have now purified the approximately 28-kDa carboxyl-terminal region of the heavy chain lacking the last two phosphorylation sites, and we have shown that this peptide copolymerizes with and regulates the actin-activated Mg2(+)-ATPase activities of native dephosphorylated and phosphorylated myosin II. It can be concluded from these studies that the biologically relevant enzymatic activity of myosin II is regulated by a phosphorylation-dependent conformational change in the myosin filaments.

Functional consequences of the proteolytic removal of regulatory serines from the nonhelical tailpiece of Acanthamoeba myosin II

The actin-activated Mg2(+)-ATPase activity of myosin II from Acanthamoeba castellanii is regulated by phosphorylation of 3 serines in its 29-residue, nonhelical, COOH-terminal tailpiece, i.e., serines-1489, -1494, and -1499 or, in reverse order, residues 11, 16, and 21 from the COOH terminus. To investigate the essential requirements for regulation, myosin II filaments in the presence of F-actin were digested by arginine-specific submaxillary gland protease. Two-dimensional peptide mapping of purified, cleaved myosin II showed that the two most terminal phosphorylation sites, serines-1494 and -1499, had been removed. Cleaved dephosphorylated myosin II retained full actin-activated Mg2(+)-ATPase activity (with no change in Vmax or Kapp) and the ability to form filaments similar to those of the native enzyme. However, higher Mg2+ concentrations were required for both filament formation and maximal ATPase activity. The one remaining regulatory serine in the cleaved myosin II was phosphorylatable by myosin II heavy-chain kinase, and phosphorylation inactivated the actin-activated Mg2(+)-ATPase activity, as in the case of the native myosin II. Also as in the case of the native myosin II, phosphorylated cleaved myosin II inhibited the actin-activated Mg2(+)-ATPase activity of dephosphorylated cleaved myosin II when the two were copolymerized. These results suggest that at least 18 of the 29 residues in the nonhelical tailpiece of the heavy chain are not required for either actin-activated Mg2(+)-ATPase activity or filament formation and that phosphorylation of Ser-1489 is sufficient to regulate the actin-activated Mg2(+)-ATPase activity of myosin II.

Acanthamoeba myosin I heavy chain kinase is activated by phosphatidylserine-enhanced phosphorylation.

The actin-activated Mg2(+)-ATPase activities of myosins I from Acanthamoeba castellanii are fully expressed only when a single amino acid on their heavy chain is phosphorylated by myosin I heavy chain kinase. Here we show that kinase isolated by a procedure designed to minimize its phosphorylation during purification can incorporate up to 7.5 mol of phosphate/mol of enzyme when incubated with ATP, possibly by autophosphorylation. The rate of phosphorylation is enhanced about 20-fold by phosphatidylserine but is unaffected by calcium ions. Phosphorylation increases the rate at which the kinase phosphorylates the regulatory site of myosin I by about 50-fold. These results suggest that (auto?)phosphorylation may regulate the activity of myosin I heavy chain kinase in vivo. The stimulation of kinase phosphorylation by phosphatidylserine (other phospholipids have not yet been tested) is of particular interest because myosin I has been shown to be tightly associated with membranes, especially the plasma membrane.

Multiple actin-based motor genes in Dictyostelium.

Dictyostelium cells, devoid of conventional myosin, display a variety of motile activities, consistent with the presence of other molecular motors. The Dictyostelium genome was probed at low stringency with a gene fragment containing the conserved conventional myosin head domain sequences to identify other actin-based motors that may play a role in the observed motility of these mutant cells. One gene (abmA) has been characterized and encodes a polypeptide of approximately 135 kDa with a head region homologous to other myosin head sequences and a tail region that is not predicted to form either an alpha-helical structure of coiled-coil interactions. Comparisons of the amino acid sequences of the tail regions of abmA, Dictyostelium myosin I, and Acanthamoeba myosins IB and IL reveal an area of sequence similarity in the amino terminal half of the tail that may be a membrane-binding domain. The abmA gene, however, does not contain an unusual Gly, Pro, Ala stretch typical of many of the previously described myosin Is. Two additional genes (abmB and abmC) were identified using this approach and also found to contain sequences that encode proteins with typical conserved myosin head sequences. The abm genes may be part of a large family of actin-based motors that play various roles in diverse aspects of cellular motility.

The localization and sequence of the phosphorylation sites of Acanthamoeba myosins I: An improved method for locating the phosphorylated amino acid

The actin-activated Mg2+-ATPase activities of Acanthamoeba myosins IA, IB, and IC are expressed only when a single site in their heavy chains is phosphorylated by a myosin I heavy chain-specific kinase. We show that phosphorylation occurs at Ser-315 in the myosin IB heavy chain, Ser-311 in myosin IC, and a threonine residue at a corresponding position in myosin IA whose amino acid sequence is as yet unknown. The most obvious feature common to the three substrates is a basic amino acid(s) 2 or 3 residues before the site of phosphorylation. The phosphorylation site is located between the ATP- and actin-binding sites, which corresponds to the middle of the 50-kDa domain of skeletal muscle myosin subfragment 1. The sequence similarity between the region surrounding the phosphorylation site of myosin I and subfragment 1 is much lower than the average sequence similarity between myosin I and subfragment 1. This is consistent with the hypothesis that the conformation of this region of myosin I differs from that of the corresponding region in skeletal muscle myosin and that phosphorylation converts the conformation of the actomyosin I complex into a conformation comparable to that present in actosubfragment 1 without phosphorylation. The protein sequences obtained in the course of this work led to the conclusion that the myosin I genes previously identified as myosin IB and IL (myosin-like) heavy chains actually are the myosin IC and IB heavy chains, respectively. Finally, we report a modification of the method for monitoring the appearance of 32Pi during sequencing of 32P-labeled peptides that results in almost complete recovery of the radioactivity, thus allowing unequivocal assignment of the position of the phosphorylated residue.

Myosin I heavy-chain genes of Acanthamoeba castellanii: cloning of a second gene and evidence for the existence of a third isoform

We have determined the complete sequence and structure of a second myosin I heavy-chain gene from Acanthamoeba castellanii. This gene, which we have named MIL, spans approx. 6 kb, is split by 17 introns, encodes a 1147-aa polypeptide, and is transcribed in log-phase cells. The positions of six of the introns are conserved relative to a vertebrate muscle myosin gene. Similar to the previously characterized MIB heavy-chain gene, the deduced MIL heavy-chain aa sequence reveals a 125-kDa protein composed of a myosin globular head domain joined to a novel, approx. 50-kDa C-terminal domain that is rich in glycine, proline and alanine residues. There are differences, however, between MIL and MIB in the sequence organization of their unconventional C-terminal domains. We conclude from this and other data that Acanthamoeba express at least three myosin I heavy-chain isoforms: MIL, plus MIA and MIB, whose purifications have been published previously. Amoeba genomic DNA blots probed with a short, highly conserved sequence whose position is transposed between MIB and MIL indicate that the Acanthamoeba myosin I heavy-chain gene family may actually contain as many as six genes. Finally, we compared the myosin I sequences with those of two related proteins, Drosophila NinaC and the bovine myosin I-like protein, and found that a portion of the unconventional C-terminal domains of the amoeba myosins I and the bovine protein appear to be related.

Dictyostelium discoideum contains a gene encoding a myosin I heavy chain.

We have cloned and completely sequenced a gene encoding the heavy chain of Dictyostelium myosin I. Like the myosin I molecules from Acanthamoeba, the Dictyostelium myosin I heavy chain is composed of a globular head domain fused to a 45-kDa glycine-, proline-, and alanine-rich carboxyl-terminal domain, rather than the coiled-coil rod domain of conventional myosins. Comparisons of the Dictyostelium myosin I heavy-chain amino acid sequence with those of the Acanthamoeba myosins I reveal that they are highly similar throughout, including the unconventional carboxyl-terminal domains. The Dictyostelium myosin I gene is expressed in growing cells as a 3600-nucleotide mRNA. Measurements of the steady-state level of this mRNA at different times during starvation-induced aggregation and development are consistent with a role for myosin I in chemotaxis and aggregation. Generation of Dictyostelium cells lacking myosin I by gene disruption and/or antisense RNA production should provide a way to test directly the role of this nonfilamentous myosin in cell motility. These experiments will be simplified by the fact that Southern blot analyses of Dictyostelium genomic DNA are consistent with there being a single myosin I heavy-chain gene.

Purification and characterization of an Acanthamoeba nuclear actin-binding protein.

Immunolocalization of monoclonal antibodies to Acanthamoeba myosin I showed a cross-reactive protein in nuclei (Hagen, S. J., D. P. Kiehart, D. A. Kaiser, and T. D. Pollard. 1986. J. Cell Biol. 103:2121-2128). This protein is antigenically related to myosin I in that nine monoclonal antibodies and three polyclonal antibodies are cross-reactive. However, studies with affinity-purified antibodies and two-dimensional peptide maps show that the protein is not a proteolytic product of myosin I. We have used cell fractionation and column chromatography to purify this protein. It is a dimer of 34-kD polypeptides with a Stokes' radius of 4 nm. A polyclonal antisera generated against the purified protein confirms the nuclear localization seen with the cross-reactive monoclonal antibodies. The 34-kD protein binds actin filaments in an ATP-insensitive manner with a Kd of approximately 0.25 microM without cross-linking, severing, or capping. No ATPase activity was detected in the presence or absence of actin. It also binds to DNA. These unique properties suggest we have discovered a new class of actin-binding protein. We have given this protein the name NAB for "nuclear actin-binding" protein.

Sequence similarities between chicken intestinal 110-kDa ATPase and myosin I-like enzymes

We report the partial amino acid sequence of chicken intestinal microvillar 110-kDa protein that, as a complex with calmodulin, has previously been shown to exhibit myosin-like ATPase and actin-binding activities. The sequence shows a high degree of similarity to the sequence of a novel vertebrate myosin I-like heavy chain encoded by a cDNA isolated from bovine intestine. This confirms that the bovine and chicken proteins are the first examples of Acanthamoeba myosin I-like proteins from higher eukaryotes. Comparison of available structural and functional data leads us to postulate that the myosin I family of proteins result from the fusion of a conserved myosin headlike motor domain, with variable COOH-terminal domains responsible for binding to specific intracellular structures.

The effect of actin and phosphorylation on the tryptic cleavage pattern of Acanthamoeba myosin IA

The Mg2+-ATPase activity of Acanthamoeba myosin IA is activated by F-actin only when the myosin heavy chain is phosphorylated at a single residue. In order to gain insight into the conformational changes that may be responsible for the effects of F-actin and phosphorylation on myosin I ATPase, we have studied their effects on the proteolysis of the myosin IA heavy chain by trypsin. Trypsin initially cleaves the unphosphorylated, 140-kDa heavy chain of Acanthamoeba myosin IA at sites 38 and 112 kDa from its NH2 terminus and secondarily at sites 64 and 91 kDa from the NH2 terminus. F-actin has no effect on tryptic cleavage at the 91- and 112-kDa sites, but does protect the 38-kDa site and the 64-kDa site. Phosphorylation (which occurs very near the 38-kDa site) has no detectable effect on the tryptic cleavage pattern in the absence of F-actin or on F-actin protection of the 64-kDa site, but significantly enhances F-actin protection of the 38-kDa site. Protection of the 64-kDa site is probably due to direct steric blocking because F-actin binds to this region of the heavy chain. The protection of the 38-kDa site by F-actin may be the result of conformational changes in this region of the heavy chain induced by F-actin binding near the 64-kDa site and by phosphorylation. The conformational changes in the heavy chain of myosin IA that are detected by alterations in its susceptibility to proteolysis are likely to be related to the conformational changes that are involved in the phosphorylation-regulated actin-activated Mg2+-ATPase activities of Acanthamoeba myosins IA and IB.

New plasmid vectors for high level synthesis of eukaryotic fusion proteins in Escherichia coli

Production of eukaryotic proteins in Escherichia coli has become rather simple since commercially available bacteriophage and plasmid vector systems allow investigators to select the optimal system for their particular problem. A common question is which system to use to produce the largest quantity of soluble recombinant protein with minimal, if any, bacterial protein fused to it. We have constructed a new set of plasmid vectors that produce large amounts of a fusion proteins that contain less than 25 amino acids of bacterial protein. We started with pATH-1, a plasmid expression vector comprised of the trpEp promoter and 37 kDa of the TrpE protein followed by a M13mp13 multiple cloning site for insertion of sequences to be expressed. We deleted the majority of the eukaryotic trpE sequence to produce a multiple frame, multiple enzyme cloning site, plasmid expression vector set called pRX. Transformation of E. coli CAG-456 (Baker et al., 1984) with this vector with an Acanthamoeba myosin tail sequence inserted in the correct frame yields a fusion protein that represents 45 % of the total soluble protein. We have produced and purified 100 mg of this Acanthamoeba myosin-II fusion protein per liter of cell suspension.

Structural and immunological characterization of the myosin-like 110-kD subunit of the intestinal microvillar 110K-calmodulin complex: evidence for discrete myosin head and calmodulin-binding domains.

The actin bundle within each microvillus of the intestinal brush border is tethered laterally to the membrane by spirally arranged bridges. These bridges are thought to be composed of a protein complex consisting of a 110-kD subunit and multiple molecules of bound calmodulin (CM). Recent studies indicate that this complex, termed 110K-CM, is myosin-like with respect to its actin binding and ATPase properties. In this study, possible structural similarity between the 110-kD subunit and myosin was examined using two sets of mAbs; one was generated against Acanthamoeba myosin II and the other against the 110-kD subunit of avian 110K-CM. The myosin II mAbs had been shown previously to be cross-reactive with skeletal muscle myosin, with the epitope(s) localized to the 50-kD tryptic fragment of the subfragment-1 (S1) domain. The 110K mAbs (CX 1-5) reacted with the 110-kD subunit as well as with the heavy chain of skeletal but not with that of smooth or brush border myosin. All five of these 110K mAbs reacted with the 25-kD, NH2-terminal tryptic fragment of chicken skeletal S1, which contains the ATP-binding site of myosin. Similar tryptic digestion of 110K-CM revealed that these five mAbs all reacted with a 36-kD fragment of 110K (as well as larger 90- and 54-kD fragments) which by photoaffinity labeling was shown to contain the ATP-binding site(s) of the 110K subunit. CM binding to these same tryptic digests of 110K-CM revealed that only the 90-kD fragment retained both ATP- and CM-binding domains. CM binding was observed to several tryptic fragments of 60, 40, 29, and 18 kD, none of which contain the myosin head epitopes. These results suggest structural similarity between the 110K and myosin S1, including those domains involved in ATP- and actin binding, and provide additional evidence that 110K-CM is a myosin. These studies also support the results of Coluccio and Bretscher (1988. J. Cell Biol. 106:367-373) that the calmodulin-binding site(s) and the myosin head region of the 110-kD subunit lie in discrete functional domains of the molecule.

Enzymatic activity and filament assembly of Acanthamoeba myosin II are regulated by adjacent domains at the end of the tail

Polyclonal antibodies raised against a synthetic peptide consisting of the last 19 amino acids at the end of the coiled-coil region of the heavy chains inhibited the actin-activated Mg 2+-ATPase activity of myosin II and its ability to form filaments. Antibodies against a synthetic peptide corresponding to the 21 adjacent amino acids at the beginning of the non-helical tailpiece, which include the three regulatory phosphorylatable serines, had no effect on either activity.

Identification of two phosphorylated threonines in the tail region of Dictyostelium myosin II.

We have previously purified and characterized a Dictyostelium myosin II heavy chain kinase which phosphorylates threonine residues (Côté, G. P., and Bukiejko, U. (1987) J. Biol. Chem. 262, 1065-1072). The phosphorylated threonines are located within a 34-kDa fragment which can be selectively cleaved from the carboxyl terminal end of the Dictyostelium myosin II tail. Tryptic and chymotryptic digests of the 34-kDa fragment phosphorylated with the kinase have now been performed and the resulting phosphopeptides isolated and sequenced. Two phosphorylated threonine residues have been identified, corresponding to residues 1833 and 2029 in the complete amino acid sequence of the Dictyostelium myosin II heavy chain. These amino acids are 87 and 283 residues, respectively, distant from the carboxyl terminus of the Dictyostelium myosin II heavy chain and are present in sections of the tail which seem to be alpha-helical coiled coils. In contrast, the three Acanthamoeba myosin II heavy chain phosphorylation sites are located within 10 residues of each other in a small globular domain at the carboxyl terminal tip of the tail (Côté, G. P., Robinson, E. A., Appella, E., and Korn, E. D. (1984) J. Biol. Chem. 259, 12781-12787). This suggests that the mechanism by which heavy chain phosphorylation inhibits the actin-activated ATPase activity and filament-forming properties of the two myosins may be quite different.

Localization of the actin-binding sites of Acanthamoeba myosin IB and effect of limited proteolysis on its actin-activated Mg2+-ATPase activity.

Acanthamoeba myosin IB contains a 125-kDa heavy chain that has high actin-activated Mg2+-ATPase activity when 1 serine residue is phosphorylated. The heavy chain contains two F-actin-binding sites, one associated with the catalytic site and a second which allows myosin IB to cross-link actin filaments but has no direct effect on catalytic activity. Tryptic digestion of the heavy chain initially produces an NH2-terminal 62-kDa peptide that contains the ATP-binding site and the regulatory phosphorylation site, and a COOH-terminal 68-kDa peptide. F-actin, in the absence of ATP, protects this site and tryptic cleavage then produces an NH2-terminal 80-kDa peptide. Both the 62- and the 80-kDa peptides retain the (NH+4,EDTA)-ATPase activity of native myosin IB and both bind to F-actin in an ATP-sensitive manner. However, only the 80-kDa peptide retains a major portion of the actin-activated Mg2+-ATPase activity. This activity requires phosphorylation of the 80-kDa peptide by myosin I heavy chain kinase but, in contrast to the activity of intact myosin IB, it has a simple, hyperbolic dependence on the concentration of F-actin. Also unlike myosin IB, the 80-kDa peptide cannot cross-link F-actin filaments indicating the presence of only a single actin-binding site. These results allow the assignment of the actin-binding site involved in catalytic activity to the region near, and possibly on both sides of, the tryptic cleavage site 62 kDa from the NH2 terminus, and the second actin-binding site to the COOH-terminal 45-kDa domain. Thus, the NH2-terminal 80 kDa of the myosin IB heavy chain is functionally similar to the 93-kDa subfragment 1 of muscle myosin and most likely has a similar organization of functional domains.

A model for the polymerization of Acanthamoeba myosin II and the regulation of its actin-activated Mg2+-ATPase activity.

A model for the polymerization of Acanthamoeba myosin II and the regulation of its actin-activated Mg2+-ATPase activity.