Solar energy is among the cleanest and most sustainable ways to enhance electrical supply's resiliency and reliability for domestic and industrial use. A Photovoltaic (PV) system is the most effective way of capturing solar energy. Long-term warranty, low-cost maintenance, and vast resource availability, solar power generation has an advantage over other approaches. Thin-film technology PV cells are a new kind of solar cell that offers an efficient technique of generating electricity from sunlight. The thin-film PV technology (FFMAT-10, Renovagen, UK) used in this study can supply 0.9 to 1.6 kW of energy to the fast-fold energy hub. The hub’s system status and configuration display battery power input, battery’s state of charge, thin-film PV power and AC power output. Two fast-fold mats (with a surface area of 25.3 m2) were connected to the energy hub. Increasing energy demand coupled with frequent power outages, and inaccessibility of electricity in rural areas necessitates the usage of PV systems at their best performance level. The study objective, therefore, sought to assess the effect of tilt angle on the performance of the thin-film PV system. The study was conducted at Kimicha in Kirinyaga County Kenya, and Juja, Kenya at tilt angles between 0o to 30o. The results indicated that the mean peak PV power for Kimicha was 347.8±231.9 W at 5o and 517.7± 131.3 W at 15ofor Juja. The maximum solar radiation during the study period was 1086.4 ±211.4 W/m2 for Juja and 973.5±219.93 W/m2 for Kimicha. From the study, it was realized that an optimal tilt angle yields optimum solar radiation that translates to maximum power production. Even though the study was conducted in two different regions, it may be applied to any other geographical location. The outcome of the study aids in acquiring self-sustaining power in the most remote locations where electricity is scarce as well as improving energy security.