AC Electroosmosis Research Articles

High-speed broadband elastic actuator in water using induced-charge electro-osmosis with a skew structure.

An artificial cilium using ac electro-osmosis (ACEO) is attractive because of its large potentiality for innovative microfluidic applications. However, the ACEO cilium has not been probed experimentally and has a shortcoming that the working frequency range is very narrow. Thus, we here propose an ACEO elastic actuator having a skew structure that broadens a working frequency range and experimentally demonstrate that the elastic actuator in water can be driven with a high-speed (∼10 Hz) and a wide frequency range (∼0.1 to ∼10 kHz). Moreover, we propose a simple self-consistent model that explains the broadband characteristic due to the skew structure with other characteristics. By comparing the theoretical results with the experimental results, we find that they agree fairly well. We believe that our ACEO elastic actuator will play an important role in microfluidics in the future.

Review: Electric field driven pumping in microfluidic device.

Pumping of fluids with precise control is one of the key components in a microfluidic device. The electric field has been used as one of the most popular and efficient nonmechanical pumping mechanism to transport fluids in microchannels from the very early stage of microfluidic technology development. This review presents fundamental physics and theories of the different microscale phenomena that arise due to the application of an electric field in fluids, which can be applied for pumping of fluids in microdevices. Specific mechanisms considered in this report are electroosmosis, AC electroosmosis, AC electrothermal, induced charge electroosmosis, traveling wave dielectrophoresis, and liquid dielectrophoresis. Each phenomenon is discussed systematically with theoretical rigor and role of relevant key parameters are identified for pumping in microdevices. We specifically discussed the electric field driven body force term for each phenomenon using generalized Maxwell stress tensor as well as simplified effective dipole moment based method. Both experimental and theoretical works by several researchers are highlighted in this article for each electric field driven pumping mechanism. The detailed understanding of these phenomena and relevant key parameters are critical for better utilization, modulation, and selection of appropriate phenomenon for efficient pumping in a specific microfluidic application.

Recent advances in AC electrokinetic sample enrichment techniques for biosensor development

Abstract Integration of biosensing techniques with microfluidics has enabled less sample consumption and increased sensitivity. In addition, it offers a potential improvement with respect to slow diffusion-limited sensing, as well as the incorporation of several sample handling parts into a single lab-on-a-chip device. One highly efficient technique in microfluidics that can be utilized in pre-sensing sample preparation steps such as sorting, separation, trapping, enrichment, and labelling is electrokinetics. AC electroosmosis, AC electrothermal, and dielectrophoresis are among the highly applicable electrokinetic methods used for pre-sensing sample preparation for enhancing sensitivity, limit-of-detection, and selectivity of biosensing devices. In this review article, we focus on these three electrokinetic techniques used for sample enrichment in the field of biosensing technology. First, the working principals of electrothermal, electroosmosis, and dielectrophoresis are characterized, and then their recent advances and major achievements in sample enrichment for biosensors are discussed

A study on an AC electroosmotic micropump using a square pole – Slit electrode array

The paper presents a novel AC electroosmotic micropump using a square pole – slit electrode array called the SS-ACEO-MP. The AC electroosmosis (ACEO) generates convection flows when AC voltage is applied to a liquid such as water with fixed electrodes. The ACEO flow is stable without electrolysis due to the low AC voltage; however, to realize a micropump for wide applications, a special mechanism for a unidirectional flow is required. For that purpose, conventional devices utilize asymmetric electrodes, induced-charge electroosmosis, and traveling wave voltage. For practical applications, high slip velocity due to ACEO is required. The proposed pump consists of a square pole – slit electrode array, and efficiently generates a total flow by the slip velocity mainly on the slit electrodes. The proposed pump features a simple pillar-shaped structure without moving parts, efficient flow generation, and easy improvements of the pressure and the flow rate due to the arrayed structure. First, 3D FEM (finite element method) simulation of the SS-ACEO-MPs was performed and the characteristics were clarified. The size parameters that maximize the effective slip velocity under no load were clarified. Second, the SS-ACEO-MPs were fabricated by a MEMS (micro electro mechanical systems) fabrication process that included electroforming. Third, experiments on the SS-ACEO-MPs were performed. The characteristics of the SS-ACEO-MPs were clarified. Finally, at the applied voltage of 26Vpp, the maximum effective slip velocity of 1.6mm/s was realized with a unit size of 0.2×0.2×0.05mm3.

AC Electroosmosis-Enhanced Nanoplasmofluidic Detection of Ultralow-Concentration Cytokine.

Label-free, nanoparticle-based plasmonic optical biosensing, combined with device miniaturization and microarray integration, has emerged as a promising approach for rapid, multiplexed biomolecular analysis. However, limited sensitivity prevents the wide use of such integrated label-free nanoplasmonic biosensors in clinical and life science applications where low-abundance biomolecule detection is needed. Here, we present a nanoplasmofluidic device integrated with microelectrodes for rapid, label-free analysis of a low-abundance cell signaling protein, detected by AC electroosmosis-enhanced localized surface plasmon resonance (ACE-LSPR) biofunctional nanoparticle imaging. The ACE-LSPR device is constructed using both bottom-up and top-down sensor fabrication methods, allowing the seamless integration of antibody-conjugated gold nanorod (AuNR) biosensor arrays with microelectrodes on the same microfluidic platform. Applying an AC voltage to microelectrodes while scanning the scattering light intensity variation of the AuNR biosensors results in significantly enhanced biosensing performance. The AC electroosmosis (ACEO) based enhancement of the biosensor performance enables rapid (5-15 min) quantification of IL-1β, a pro-inflammatory cytokine biomarker, with a sensitivity down to 158.5 fg/mL (9.1 fM) for spiked samples in PBS and 1 pg/mL (58 fM) for diluted human serum. Together with the optimized detection sensitivity and speed, our study presents the first critical step toward the application of nanoplasmonic biosensing technology to immune status monitoring guided by low-abundance cytokine measurement.

Electrokinetic Phenomena in Pencil Lead-Based Microfluidics.

Fabrication of microchannels and associated electrodes to generate electrokinetic phenomena often involves costly materials and considerable effort. In this study, we used graphite pencil-leads as low cost, disposable 3D electrodes to investigate various electrokinetic phenomena in straight cylindrical microchannels, which were themselves fabricated by using a graphite rod as the microchannel mold. Individual pencil-leads were employed as the micro-electrodes arranged along the side walls of the microchannel. Efficient electrokinetic phenomena provided by the 3D electrodes, including alternating current electroosmosis (ACEO), induced-charge electroosmosis (ICEO), and dielectrophoresis (DEP), were demonstrated by the introduced pencil-lead based microfluidic devices. The electrokinetic phenomena were characterized by micro-particle image velocimetry (micro-PIV) measurements and microscopy imaging. Highly efficient electrokinetic phenomena using 3D pencil-lead electrodes showed the affordability and ease of this technique to fabricate microfluidic devices embedded with electrodes for electrokinetic fluid and particle manipulations.

Contact-Free Templating of 3-D Colloidal Structures Using Spatially Nonuniform AC Electric Fields.

The formation of ordered and regularly shaped structures of colloidal particles with the aid of spatially nonuniform electric fields is a modern research area of great interest. This work illustrates how alternating current (AC) electrokinetic effects (dielectrophoresis, electroosmosis) can serve as contact-free templates, inside which colloidal microspheres can assemble into a variety of shapes and sizes. We show how three-dimensional colloidal structures of square, circular, and diamond shape of many tens of micrometers in size can be reproducibly formed with a single set of quadrupolar microelectrodes. Numerical simulations performed help to explain the role of AC electroosmosis and AC dielectrophoresis on the shaping of these structures as a function of applied voltage and frequency. We also demonstrate how the templating repertoire is further enhanced with the simultaneous application of a second, individually controlled AC electric field, which enables a variety of asymmetric colloidal structures to be produced using the same set of quadrupolar microelectrodes. As the preservation of shape and size of such electric-field templated structures after medium evaporation still remains a big challenge, here we also report on a novel method that permits the stabilization and isolation of these particle assemblies through medium gelation and subsequent hydrogel removal with a UV/ozone treatment.

Induced-charge electrokinetics, bipolar current, and concentration polarization in a microchannel-Nafion-membrane system.

The presence of a floating electrode array located within the depletion layer formed due to concentration polarization across a microchannel-membrane interface device may produce not only induced-charge electro-osmosis (ICEO) but also bipolar current resulting from the induced Faradaic reaction. It has been shown that there exists an optimal thickness of a thin dielectric coating that is sufficient to suppress bipolar currents but still enables ICEO vortices that stir the depletion layer, thereby affecting the system's current-voltage response. In addition, the use of alternating-current electro-osmosis by activating electrodes results in further enhancement of the fluid stirring and opens new routes for on-demand spatiotemporal control of the depletion layer length.

Dependence of Shape and Geometry of Microelectrodes in Manipulating Polarizable Particles like DNA through Electro-kinetic Effects

<p>Recently electro-kinetics, namely AC electro-osmosis and dielectrophoresis have been judiciously utilised to manipulate movement of polarizable particles like DNA suspended in aqueous solution and placed between electrically fed microelectrodes. Researchers around the globe have tried to fabricate electrodes of different geometries to understand how electric field owing to sharpness of the electrodes has influenced the aforementioned electro-kinetic properties. In this review, we have presented a chronological development indesign of patterned electrodes used to align and trap DNA molecules in and around the electrodes. We have examined the pros and the cons of such geometry of the set of the micro-electrodes and also tried to provide a solution in terms of shape and sharpness of the electrode that would facilitate DNA molecules to bridge between the electrodes for further application of conducting DNA as molecular wire. </p>

Increasing local density and purity of molecules/bacteria on a sensing surface from diluted blood using 3D hybrid electrokinetics.

We present a long-range and selective nanocolloid/molecular/bacteria concentrator based on 3D hybrid AC electrokinetics (ACEK) that includes AC dielectrophoresis (DEP) and biased AC electroosmosis (ACEO). Through a convergency comb-shaped electrode design, this long-range ACEO allows the effective transport of a high number of targets into the centre of the detection zone. In the proposed 3D hybrid electrokinetics model, 3D ACEO provides long-range transportation, and the 3D DEP provides an effective separation mechanism. Thus, detection targets ranging from nanoscale to micrometers could be selectively concentrated long-range from diluted blood. The proposed design was used for selectively concentrating nanocolloids and bacteria in the diluted blood sample, respectively. Compared to a 3D short-range dipolar electrode configuration, the detection limit of long-range 3D convergency tripolar electrode configuration is one order of magnitude higher. The result also shows that the 3D hybrid ACEK demonstrated a higher purity of any plane above the electrode, which compared positively to the same design of a 2D hybrid ACEK. The concentration factor of the proposed 3D hybrid electrokinetics device increased by several orders of local density and raised the local purity at least 6 orders (from 0.05% to greater than 99.9%). The chip is capable of making a DNA/protein/bacterial aggregate characterized by high local density and purity for further molecular and bacteria detection/analysis.

Combined AC electroosmosis and dielectrophoresis for controlled rotation of microparticles.

Electrorotation is widely used for characterization of biological cells and materials using a rotating electric field. Generally, multiphase AC electric fields and quadrupolar electrode configuration are needed to create a rotating electric field for electrorotation. In this study, we demonstrate a simple method to rotate dielectrophoretically trapped microparticles using a stationary AC electric field. Coplanar interdigitated electrodes are used to create a linearly polarized nonuniform AC electric field. This nonuniform electric field is employed for dielectrophoretic trapping of microparticles as well as for generating electroosmotic flow in the vicinity of the electrodes resulting in rotation of microparticles in a microfluidic device. The rotation of barium titanate microparticles is observed in 2-propanol and methanol solvent at a frequency below 1 kHz. A particle rotation rate as high as 240 revolutions per minute is observed. It is demonstrated that precise manipulation (both rotation rate and equilibrium position) of the particles is possible by controlling the frequency of the applied electric field. At low frequency range, the equilibrium positions of the microparticles are observed between the electrode edge and electrode center. This method of particle manipulation is different from electrorotation as it uses induced AC electroosmosis instead of electric torque as in the case of electrorotation. Moreover, it has been shown that a microparticle can be rotated along its own axis without any translational motion.

Optoelectrofluidic enhanced immunoreaction based on optically-induced dynamic AC electroosmosis.

We report a novel optoelectrofluidic immunoreaction system based on electroosmotic flow for enhancing antibody-analyte binding efficiency on a surface-based sensing system. Two conventional indium tin oxide glass slides are assembled to provide a reaction chamber for a tiny volume of sample droplet (∼5 μL), in which the top layer is employed as an antibody-immobilized substrate and the bottom layer acts as a photoconductive layer of an optoelectrofluidic device. Under the application of an AC voltage, an illuminated light pattern on the photoconductive layer causes strong counter-rotating vortices to transport analytes from the bulk solution to the vicinity of the assay spot on the glass substrate. This configuration overcomes the slow immunoreaction problem of a diffusion-based sensing system, resulting in the enhancement of binding efficiency via an optoelectrofluidic method. Furthermore, we investigate the effect of optically-induced dynamic AC electroosmotic flow on optoelectrofluidic enhancement for surface-based immunoreaction with a mathematical simulation study and real experiments using immunoglobulin G (IgG) and anti-IgG. As a result, dynamic light patterns provided better immunoreaction efficiency than static light patterns due to effective mass transport of the target analyte, resulting in an achievement of 2.18-fold enhancement under a growing circular light pattern compared to the passive mode.

2G24 交流電場下の先鋭電極に形成される電場・流動場を用いた細胞操作手法

A cell manipulation is important technology to develop novel medical therapy and medical applications. AC electrokinetics is useful for the cell manipulation. The applied electric field in the cell dispersion generates forces on cells with dielectrophoresis (DEP) and flows caused by the AC electrokinetics. The system of sharp tip electrode with AC electrokinetics is one of the optimal combinations to manipulate cells for biological and medical applications. In this study, hepatocytes motion and the fluid flow were investigated using the sharp tip electrode under several applied voltage conditions, applied frequency conditions, the particle size and liquid conductivity. The characteristics of the cell manipulation and the generating mechanism of the electric induced flow with AC electroosmosis were investigated.

Fast and sensitive detection of bacteria from a water droplet by means of electric field effects and micro-Raman spectroscopy

A surface-based method that can provide early and label-free detection of target microorganisms in water is presented. The method combines three key features, namely, (a) accelerated transportation to, and focusing of bacteria on, the detection surface by means of alternating current (AC) electrokinetic effects, (b) selective capture of the target microorganism using surface-immobilized antibodies, and (c) sensitive detection of target bacteria with micro-Raman spectroscopy. The non-uniform electric field is created by an AC signal-driven planar, quadrupolar, gold microelectrode array that is deposited on the detection surface (oxidized silicon wafer). AC electroosmosis and dielectrophoresis combine to produce the desired concentration amplification of bacteria on the capture surface within a few minutes. Bacterial detection is, subsequently, accomplished through Raman spectra acquired at pre-determined locations near the electrodes after sample removal and rinsing of the capture surface. Using this technique, detection of Escherichia coli K12 (target microorganism) at concentrations as low as 102 bacteria per mL was reproducibly achieved from 50μL sample droplets. This method also permits the selective retention of a target microorganism from polymicrobial mixtures, as demonstrated here with the capture of E. coli K12 from their mixtures with Micrococcus luteus.

Electrokinetics of scalable, electric-field-assisted fabrication of vertically aligned carbon-nanotube/polymer composites

Composite thin films incorporating vertically aligned carbon nanotubes (VACNTs) offer promise for a variety of applications where the vertical alignment of the CNTs is critical to meet performance requirements, e.g., highly permeable membranes, thermal interfaces, dry adhesives, and films with anisotropic electrical conductivity. However, current VACNT fabrication techniques are complex and difficult to scale up. Here, we describe a solution-based, electric-field-assisted approach as a cost-effective and scalable method to produce large-area VACNT composites. Multiwall-carbon nanotubes are dispersed in a polymeric matrix, aligned with an alternating-current (AC) electric field, and electrophoretically concentrated to one side of the thin film with a direct-current (DC) component to the electric field. This approach enables the fabrication of highly concentrated, individually aligned nanotube composites from suspensions of very dilute (ϕ=4×10−4) volume fraction. We experimentally investigate the basic electrokinetics of nanotube alignment under AC electric fields, and show that simple models can adequately predict the rate and degree of nanotube alignment using classical expressions for the induced dipole moment, hydrodynamic drag, and the effects of Brownian motion. The composite AC + DC field also introduces complex fluid motion associated with AC electro-osmosis and the electrochemistry of the fluid/electrode interface. We experimentally probe the electric-field parameters behind these electrokinetic phenomena, and demonstrate, with suitable choices of processing parameters, the ability to scalably produce large-area composites containing VACNTs at number densities up to 1010 nanotubes/cm2. This VACNT number density exceeds that of previous electric-field-fabricated composites by an order of magnitude, and the surface-area coverage of the 40 nm VACNTs is comparable to that of chemical-vapor-deposition-grown arrays of smaller-diameter nanotubes.

Combination of ac electroosmosis and dielectrophoresis for particle manipulation on electrically-induced microscale wave structures

This work presents a simple method to fabricate controllable microscale wave structures on the top of regular interdigitated electrode (IDE) arrays using electrically-assisted lithography techniques. Smooth wave structures are extremely difficult, if not impossible, to fabricate using traditional multilayer photolithography technology. The fabricated wave structures were carefully measured using an optical profiler and the measured wave profiles were used in the numerical simulation of electrical field and for evaluating the parameters influencing the fabricated wave structure. It is demonstrated that the combined smooth wave structure and IDE array offer unique capability for particle manipulation including particle concentration, aggregation and separation. Particle motion manipulated via the combined wave structure and IDE array is governed by ac electroosmosis (ACEO), dielectrophoresis (DEP) or a combination of both depending on the applied frequency. At lower frequencies (~30 kHz), ACEO dominates and particles are driven to move along the valleys of the wave structures; while at higher frequencies (~200 kHz), DEP force dominates which concentrates particles at the peaks of the wave structures. In addition, varying the ac waveform from sine-wave to square-wave allows for dynamic control of particle motion. Size-dependent particle separation over the wave structure is also demonstrated for a mixture of 0.5 µm and 2 µm particles that are separated into two populations by the joint effects of drag and DEP forces when being pumped to flow via ACEO.

Resonant dielectrophoresis and electrohydrodynamics for high-sensitivity impedance detection of whole-cell bacteria.

We present the co-integration of CMOS-compatible Al/Al2O3 interdigitated microelectrodes (IDEs) with an electrokinetic-driven macroelectrode for sensitive detection of whole-cell bacteria in a microfluidic channel. Two frequency ranges applied to the macroelectrode were identified to notably increase the bacterial coverage of the impedimetric sensor per unit time. Around 10 kHz, the bacterial cells were directed towards the IDE center thanks to AC electroosmosis (AC-EO) and the sensor capacitance linearly increased, achieving a limit of detection (LoD) of 3.5 × 10(5) CFU mL(-1) after an incubation time of 20 min with Staphylococcus epidermidis. At 63 MHz precisely, a resonance effect due to the device was found to dramatically increase the trapping of S. epidermidis on the sensor periphery, due to the combined actions of short-range contactless dielectrophoresis (cDEP) and long-range Joule heating electrothermal (J-ET) flow. Thanks to a flow-based method, the bacterial cells were redirected towards the sensor center and an LoD of 10(5) CFU mL(-1) was achieved within 20 min of incubation, which is almost two orders of magnitude better than the impedimetric sensor alone. Analytical models and 2D simulations using the Maxwell stress tensor (MST) provide a comprehensive analysis of the experimental results, especially about the spectral balance between cDEP, AC-EO and J-ET accounting for the 33-nm thick insulating layer atop the electrodes. Electrode CMOS compatibility confers portability, miniaturization and affordability capabilities for building point-of-care (PoC) diagnostic tests in a lab-on-a-chip (LoC).

Effect of Curvature of Tip and Convexity of Electrode on Localization of Particles

We investigate the effect of curvature of the tip and the convexity of an electrode on the localization of suspended particles under the combined effect of dielectrophoresis and AC electroosmosis through simulations using COMSOL Multiphysics. A systematic analysis of the parameters defining the convexity of the electrode—the radius of the tip and the apex angle shows that suspended particles can be trapped closely to the electrode edges for comparatively larger tip radii and apex angles. This in turn should favour the trapping of polarizable molecules between the electrodes only if the fluid velocities at the vortices are not very strong.

Continuous detection of trace level concentration of oil droplets in water using microfluidic AC electroosmosis (ACEO)

A novel design for high throughput detection of oil micro-droplets in water which is important to environmental oil spill monitoring agencies.

The influence of flow intensity and field frequency on continuous-flow dielectrophoretic trapping

We examine the combined influence of the intensity of pressure driven background flow and the frequency of the applied field on the continuous-flow dielectrophoretic trapping behavior of micro-particles within a micro-channel. Using an embedded interdigitated electrode array, we find that the measured trapping percentage over a continuous frequency range exhibits several curious effects which are strongly dependent on the flow intensity, including an apparent shift of the cross-over frequency and low-frequency dispersion. A numerical and theoretical model accounting for the combined effects of pressure-driven flow, dielectrophoresis and alternating-current electro-osmosis on the equation of motion for the particle is used to qualitatively describe the main experimental results.