Abundance Of Microplastics Research Articles

Identification of microplastic content in milkfish ponds in Lontar Village, Serang Regency

Microplastics measuring < 5 mm can easily enter the fish's body through the respiratory system and digestive system. The aim of this research is to calculate the abundance of microplastics and determine the types contained in the bodies of milkfish, water and sediment in the Lontar Village Pond, Serang Regency. There are 6 stations, 4 fish samples were taken from each station, water samples were taken using a plankton net and sediment samples were taken using individual pipes at each station. The number of fish samples was 24 fish, meat, intestine, stomachs and gills were taken. Fish organs were destroyed using 10% KOH. Samples were incubated for 24 hours until the organic material was destroyed. Then filtered using Whattman No 42, and dried using an oven at 60ºC for 1 hour. Likewise, filtering of water and sediment samples is carried out. The types of microplastics found were fragments, fibers and films. The highest abundance was in the gills and intestines with an abundance of 11 per individual. The highest abundance of microplastics in the water in Lontar Village ponds is the fragment type with a total of 5 per/20 mL at station 3 and the film type with a total of 5 per/20 mL at station 6 and in the milkfish pond sediments of Lontar Village the highest abundance of microplastics is 1 per/25 gr. The types of polymers found in the digestive tract of milkfish are Polycarbonate (PC), Acrylonitrile butadiene styrene (ABS), Latex, Polystyrene (PS), Nylon, and Polytetrafluoroethylene (PTFE).Keywords: Aquaculture; Lontar; Microplastics; Milkfish

Assessing the abundance, sources, and potential ecological risk assessment of microplastics using their particle and mass units in Uiam Lake, South Korea

Microplastics (MPs) enter lakes through various pathways, including effluents from wastewater treatment plants (WWTPs), surface runoff, and improperly disposed of plastic waste. In this study, the extent of MPs pollution in Uiam Lake in fall of 2022 and spring of 2023 was assessed by determining both the number (n/m3) and mass concentrations (μg/m3) of MPs. Moreover, the correlation between water quality parameters and MP properties was analyzed, and an ecological risk assessment was conducted. MPs abundance was higher in spring than in fall, probably due to the lifting of coronavirus disease-19 restrictions, melting of ice, higher rainfall, and faster wind speed. Fragment was the dominant shape of the MPs collected, while polyvinyl chloride (PVC) and polyester/polyethylene terephthalate were the frequently detected polymer types of MPs in fall and spring, respectively. There was a moderate positive correlation between the number concentration of MPs and the total nitrogen, total phosphorus (T-P), and total organic carbon levels; in contrast, there was no significant relationship between the mass concentration of MPs and all water quality parameters. However, the abundance (μg/m3) of PVC and polymethyl methacrylate MPs were positively correlated with T-P and electrical conductivity. The pollution load index, polymer hazard index, and potential ecological risk index (PERI) were generally higher when the mass unit of MPs was used due to the presence of large-sized MPs composed of highly hazardous polymers (e.g., polyurethane, PVC, and alkyd). For instance, the PERI value of the WWTP effluent was at the very high level (>1200) in both seasons, regardless of the abundance unit of MPs. Therefore, WWTP effluents may have increased the ecological toxicity of MPs pollution in Uiam Lake.

Metabolomic and biochemical disorders reveal the toxicity of environmental microplastics and benzo[a]pyrene in the marine polychaete Hediste diversicolor

Recently, the abundance of environmental microplastics (MPs) has become a global paramount concern. Besides the danger of MPs for biota due to their tiny size, these minute particles may act as vectors of other pollutants. This study focused on evaluating the toxicity of environmentally relevant concentrations of MPs (10 and 50 mg/kg sediment) and benzo[a]pyrene (B[a]P, 1 µg/kg sediment), alone and in mixture, for 3 and 7 days in marine polychaete Hediste diversicolor, selected as a benthic bioindicator model. The exposure period was sufficient to confirm the bioaccumulation of both contaminants in seaworms, as well as the potential capacity of plastic particles to adsorb and vehiculate the B[a]P. Interestingly, increase of acidic mucus production was observed in seaworm tissues, indicative of a defense response. The activation of oxidative system pathways was demonstrated as a strategy to prevent lipid peroxidation. Furthermore, the comprehensive Nuclear Magnetic Resonance (NMR)-based metabolomics revealed significant disorders in amino acids metabolism, osmoregulatory process, energetic components, and oxidative stress related elements. Overall, these findings proved the possible synergic harmful effect of MPs and B[a]P even in small concentrations, which increases the concern about their long-term presence in marine ecosystems, and consequently their transfer and repercussions on marine fauna.

The seasonal variation and ecological risk of microplastics in the Lower Ganges River, Bangladesh.

Microplastic (MP) pollution has gained considerable attention in various ecosystems; however, it has received relatively less attention in freshwater-riverine environments than in other ecosystems. The Ganges River Delta, one of the world's most densely populated areas, is a potential source of MP pollution in the freshwater ecosystem. MPs were identified throughout the year in the lower Ganges River water. Seasonally, the highest abundance was observed during the monsoon (14.66 ± 2.06 MPs/L), followed by the pre-monsoon (13.46 ± 1.75 MPs/L) and post-monsoon (11.50 ± 0.40 MPs/L). Throughout the year, MP discharge was estimated at 4.12 × 1012 to 2.17 × 1013 MPs/year. Fourier transformed infrared spectroscopy identified plastic polymers in the water, like ethylene vinyl acetate, polystyrene, polypropylene, polyethylene, and nylon. Moderate contamination by MPs was assessed throughout the year. Significant correlations between MP abundance and both rainfall and discharge were observed. It is essential to implement preventative measures in the Ganges River Basin to mitigate MP pollution before the situation worsens. PRACTITIONER POINTS: Throughout the year, MP concentration ranged from 10.67 to 20.33 MPs/L The highest MP occurrence was observed in the monsoon season (14.66 ± 2.06 MPs/L) The lowest abundance was detected in the post-monsoon period (11.50 ± 0.40 MPs/L) There was a moderate level of MP contamination in the lower Ganges River water It was shown that discharge and rainfall were correlated with MP abundance.

Analysis of microplastics in the reuse of compost in three agricultural sites (Cádiz, Spain) as a circular economy strategy: detection of micropollutants and incidence of plastic ingestion levels by annelids

The system of fertilizing agricultural soils with sludge or compost from wastewater treatment processes, as one of the principles of the circular economy, can lead to microplastic (MP) contamination. The existing technical standards for fertilization are very recent and do not consider this problem, although there is scientific evidence of their existence. Therefore, this study, on the one hand, evaluates the presence of MPs in agricultural soils, previously treated with sludge or compost from wastewater treatment plants for fertilization, and on the second hand, it studies the effect of these MPs on earthworms in three different locations in the south of Spain. For the study, selected composts deriving from the different stages of the composting process and three fertilized soils with increasing MP doses were followed. Samples were taken from different sections in depth (0–5, 5–10, and 10–20 cm) to study the shape, size, type, and abundance of MPs using infrared spectroscopy (FTIR). The results showed that the most abundant shape was fiber, followed by fragment and finally bulk, for both composts and soils. Regarding size distribution, 100 µm was the predominant size in composts (64.3% ± 9.8), while in the case of soils, the predominant range was from 100 to 500 µm. The prevalent polymers in both, composts and soils, were PTFE, TPE, PP, and PET, with four times higher amounts in composts than in soils. Ingestion of common MPs were also verified in two earthworm species, which ingested concentrations higher than 2.1% w/w. PP was the most ingested MP and Eisenia fetida was more voracious compared with Lumbricus terrestris. Therefore, it can be considered a suitable bioindicator for monitoring microplastic contamination in agricultural soil.Graphical

An Investigation on the Presence and Risk Assessment of Microplastics in Quilon Beach, South West Coast of India

Microplastics (MPs) are the most serious emerging pollutant around the globe. Anthropogenic activities are the major contributor of MPs in beach sediments. MPs are widely distributed along beaches and pose a serious threat to the marine food chain including human health. The present study aims to investigate, for the first time, the occurrence, quantification of abundance and risk assessment of MPs in Quilon beach, India and also identifies the potential sources along with the assessment of degree of MPs contamination using Pollution load index (PLI) and Pollution Hazard index (PHI) parameters. Sampling was conducted in dry season in the beach. A total of thirty-three samples were collected establishing a 20m grid pattern along the study area. MPs of size range 5mm - < 0.25mm were considered. The average abundance of MPs in the study area is 3145±2515 MPs/kg of sand. Polyester (PES), Acrylonitrile butadiene styrene (ABS) are the major polymer types in the study area. Fibre was the most dominant shapes. The frequent colours found were white and transparent. MPs of size <0.25mm were the most common of all the samples. Anthropogenic activities including sewage effluents, fishing and tourism activities might be the main sources of MPs pollution in this area.

Microplastic abundance and heavy metal contamination in agricultural soil with the wastewater treatment plants effluent; Tehran, Iran

Microplastic abundance and heavy metal contamination in agricultural soil with the wastewater treatment plants effluent; Tehran, Iran

Quantification and characterization of microplastics ingested by mangrove oysters across West Africa

Microplastic ingestion by marine organisms presents a challenge to both ecosystem functioning and human health. We characterized microplastic abundance, shape, size, and polymer types ingested by the West African mangrove oyster, Crassostrea tulipa (Lamarck, 1819) sampled from estuaries and lagoons from the Gambia, Sierra Leone, Ghana, Benin, and Nigeria using optical microscopy and Fourier transform infrared (FTIR) techniques. A total of 780 microplastics were isolated in the whole tissues of the 250 oysters (n = 50 oysters per country). The abundance and distribution of microplastics in the oysters followed the pattern: the Gambia > Ghana > Sierra Leone > Nigeria > Benin. The Tanbi wetlands in the Gambia recorded the highest average of 10.50 ± 6.69 per oyster while the Ouidah lagoon in Benin recorded the lowest average of 1.80 ± 1.90 per oyster. Overall, microplastic numbers varied significantly (p < 0.05) among the five countries. Microfibers, particularly those within 1001–5000 μm size, dominated the total microplastic count with a few fragments and films. No spherical microplastics were isolated in the oysters. In the Sierra Leone and Benin oysters, fragments and films were absent in the samples. Microplastic between the 1001 and 5000 μm size class dominated the counts, followed by 501–1000 μm, 101–500 μm, and 51–100 μm. Five polymer groups namely polyethylene, polyester, nylon, polypropylene, and polyamide were identified across the five countries, with polyethylene occurring in oysters from all five countries and polyester occurring in all but the oysters from Nigeria. This diversity of polymers suggests varied sources of microplastics ingested by the studied oysters. The absence of microspheres across the five supports findings from other studies that they are the least ingested and highly egested by the oysters.Graphical

Short-term microplastic effects on marine meiofauna abundance, diversity and community composition.

Due to the copious disposal of plastics, marine ecosystems receive a large part of this waste. Microplastics (MPs) are solid particles smaller than 5 millimeters in size. Among the plastic polymers, polystyrene (PS) is one of the most commonly used and discarded. Due to its density being greater than that of water, it accumulates in marine sediments, potentially affecting benthic communities. This study investigated the ingestion of MP and their effect on the meiofauna community of a sandy beach. Meiofauna are an important trophic link between the basal and higher trophic levels of sedimentary food webs and may therefore be substantially involved in trophic transfer of MP and their associated compounds. We incubated microcosms without addition of MP (controls) and treatments contaminated with PS MP (1-µm) in marine sediments at three nominal concentrations (103, 105, 107particles/mL), for nine days, and sampled for meiofauna with collections every three days. At each sampling time, meiofauna were collected, quantified and identified to higher-taxon level, and ingestion of MP was quantified under an epifluorescence microscope. Except for Tardigrada, all meiofauna taxa (Nematoda, turbellarians, Copepoda, Nauplii, Acari and Gastrotricha) ingested MP. Absorption was strongly dose dependent, being highest at 107 particles/mL, very low at 105 particles/mL and non-demonstrable at 103 particles/mL. Nematodes accumulated MP mainly in the intestine; MP abundance in the intestine increased with increasing incubation time. The total meiofauna density and species richness were significantly lower at the lowest MP concentration, while at the highest concentration these parameters were very similar to the control. In contrast, Shannon-Wiener diversity and evenness were greater in treatments with low MP concentration. However, these results should be interpreted with caution because of the low meiofauna abundances at the lower two MP concentrations. At the highest MP concentration, abundance, taxonomic diversity and community structure of a beach meiofauna community were not significantly affected, suggesting that MP effects on meiofauna are at most subtle. However, lower MP concentrations did cause substantial declines in abundance and diversity, in line with previous studies at the population and community level. While we can only speculate on the underlying mechanism(s) of this counterintuitive response, results suggest that further research is needed to better understand MP effects on marine benthic communities.

Behavior of coastal communities in dealing with microplastic pollution in salt ponds in Cirebon Regency

Background: Cirebon Regency, as one of the national salt-producing centers located on the coast of the North Coast of Java is vulnerable to plastic waste pollution originating from rivers and marine debris that washes up on the beach. The purpose of this study was to analyze an assessment of the correlation between aspects of knowledge and attitudes towards the behavior of coastal communities in domestic plastic waste was also carried out to be used as a basis for preparing strategies for managing domestic plastic waste in coastal communities. Methods: The research method used is a combination of quantitative and qualitative methods consisting of a shoreline survey methodology, river waste abundance, laboratory analysis, statistical analysis, questionnaires, semi-structured interviews, and descriptive analysis. Findings: Pearson's correlation analysis showed that there was a strong (r=0.664) and significant (0.000) positive relationship between aspects of knowledge and behavior, then aspects of attitude and behavior had a very weak positive relationship (r=0.183) and significant (0.028). Conclusion: The community has not been pro-environmental due to the uneven distribution of available cleaning facilities. The conclusion of this study is that education, community empowerment, collaboration between village and local officials, and additional cleaning facilities are needed to reduce the problem of domestic plastic waste. Novelty/Originality of this Study: The originality of this study lies in its examination of microplastic contamination in salt ponds, directly assessing the sources of contamination from raw materials and domestic waste in Cirebon Regency, a primary salt production area in Indonesia. This focus on the direct assessment of microplastic abundance in production units, rather than commercial products, provides novel insights into the impacts of plastic pollution on food safety and local salt quality.

Microplastics and heavy metal contamination along a land-use gradient in a Himalayan foothill river: Prevalence and controlling factors

The co-occurrence of microplastics (MPs) and heavy metals in aquatic systems has raised significant concerns, yet their relationship in freshwater ecosystems remains poorly understood. This study aims to evaluate the prevalence of MPs and factors controlling their distribution in both water and sediment in the Markanda River, Northwest India. MPs were extracted from sediment and water samples using density separation and classified through fluorescence microscopy and Raman spectroscopy. Metal concentrations in river water samples were analyzed using ICP-MS, and their correlation with MP abundance was explored. The results indicated the widespread occurrence of MP pollution across the Markanda River basin, with particle concentrations ranging from 10 to 530 particles L−1 in surface water and 1330–4330 particles kg−1 dry weight (dw) in sediment samples. The variability in MP abundance at sampling sites along the Markanda River courses results from factors such as the proximity of industrial establishments and human habitation, while the influence of grain size on MP distribution appears to be limited. Pellets (88.5 %) and fragments (8.5 %) were the most abundant types of MPs, with polyethylene (45.45 %) and polystyrene (30.9 %) being the dominant forms in water samples. The ICP-MS analysis of heavy metals in water samples indicated elevated levels of As (1.67 to 32.31 ppb) in downstream areas of the river system, influenced by human activities. While metals exhibited correlation with each other, there was a weak association, except for As, with the levels of MPs in the Markanda River. The SEM-EDX analyses to characterize chemical elements absorbed onto the surface of MP showed distinct variations in upstream and downstream sites, with the presence of elements such as Mn, Ni, Cr, Zn, As, Se, and Cu found in downstream areas. We conclude that MPs contaminated with heavy metals potentially threaten the ecological security of freshwater aquatic systems and highlight the importance of management action to reduce plastic pollution worldwide.

Effect of parasitic infection on microplastic ingestion in a native leuciscid hybrid species (Alburnus derjugini x Squalius orientalis) from Kürtün Dam Lake, Türkiye

Microplastic (MP) pollution is currently one of the most serious environmental issues. MPs were investigated in the Kürtün Dam Lake in healthy individuals of the native leuciscid hybrid (Alburnus derjugini x Squalius orientalis) species and individuals infected with the Ligula intestinalis parasite. Although MP abundance appeared to be higher in non-infected fish (NIF) than in L. intestinalis (L) and infected fish (IF), the MP abundance in IF was higher, because the parasite theoretically belongs to IF. In addition to the observation of MPs in the gastrointestinal tract (GIT) of fish, the diffusion of MPs by parasites settled in the body cavity indicates that MPs are not only present in the GIT. Therefore, predation on existing fish by birds causes MP dispersion. In the present study, the most common MP shape was fiber (100% for NIF and IF, 85.7% for L), the MP color was black (57.1% for IF and L) and orange (50% for NIF), and the polymer type was polyamide (57.1% for IF, 50% for NIF) and polyethylene terephthalate (28.5% for L). These MP compositions led us to believe that textile effluents and aquaculture operations in dam lakes could be sources of pollution. Therefore, this study provides insights for future research to elucidate the connection between MP consumption and parasite infection.

Rose or Red, but Still under Threat: Comparing Microplastics Ingestion between Two Sympatric Marine Crustacean Species (Aristaeomorpha foliacea and Parapenaeus longirostris).

Increasing plastic contamination poses a serious threat to marine organisms. Microplastics (MPs) ingestion can represent a risk for the organism itself and for the ultimate consumer. Through the analysis of the gastrointestinal tract, coupled with stable isotope analysis on the muscle tissue, this study provides insights into the relationship between MPs pollution and ecology in two commercial marine species caught in the Central Tyrrhenian Sea: Aristaeomorpha foliacea and Parapenaeus longirostris. Stable isotope analysis was conducted to determine the trophic position and the trophic niche width. The gastrointestinal tracts were processed, and the resultant MPs were analysed under FT-IR spectroscopy to estimate the occurrence, abundance, and typology of the ingested MPs. The trophic level of the species was similar (P. longirostris TP = 3 ± 0.10 and A. foliacea TP = 3.1 ± 0.08), with an important trophic niche overlap, where 38% and 52% of P. longirostris and A. foliacea has ingested MPs, respectively. Though species-level differences may not be evident regarding MP's abundance per individual, a high degree of dissimilarity was noted in the typologies of ingested particles. This research provides valuable insights into how MPs enter marine trophic webs, stressing that isotopic niche analysis should be combined with other methods to explain in detail the differences in MPs ingestion.

Microplastic abundance in the semi-enclosed Osaka Bay, Japan.

Anthropogenic particles in sea surface water of the semi-enclosed Osaka Bay were identified using stereomicroscopy, classified according to polymer type using Fourier-transform infrared spectroscopy (FTIR), and categorized according to their physical characteristics. A total of 565.1 particles were detected in the water samples. However, plastic particles accounted for only 22.4% of the particles. Microplastic abundance in Osaka Bay showed seasonal variance from 8.9 ± 1.4 (in May) to 22.8 ± 6.5 particles/L (in July), which is consistent with previous reports in other semi-enclosed bays. Microplastics were mainly fragmented and fiber shaped, with gray and colorless/white coloration. The dominant polymer types were polypropylene, poly(methylmethacrylate), polyester, polyethylene, and polyethylene terephthalate. Generally, there were considerably higher abundances of microplastics at offshore sites compared with nearshore sites. The results of this study suggest that local river effluents and marine-related activities are probable sources of microplastics in Osaka Bay.

Characteristics, sources and potential ecological risk of atmospheric microplastics in Lhasa city

Atmospheric microplastics are important contributors to environmental contamination in aquatic and terrestrial systems and pose potential ecological risks. However, studies on atmospheric microplastics are still limited in urban regions of the Tibetan Plateau, a sentinel region for climate and environmental change under a warming climate. In this study, the occurrence and potential ecological risk of atmospheric microplastics were investigated in samples of suspended atmospheric microplastics collected in Lhasa city during the Tibetan New Year in February 2023. The results show that the average abundance of atmospheric microplastics in Lhasa was 7.15 ± 2.46 MPs m−3. The sizes of the detected microplastics ranged from 20.34 to 297.18 μm, approximately 87% of which were smaller than 100 μm. Fragmented microplastics (95.76%) were the dominant shape, followed by fibres (3.75%) and pellets (0.49%). The primary polymer chemical components identified were polyamide (68.73%) and polystyrene (16.61%). The analysis of meteorological data and the backwards trajectory model indicated the air mass in Lhasa mainly controlled by westwards, and the atmospheric microplastics mainly originated from long-distance atmospheric transport. The potential ecological risk index assessment revealed that the atmospheric microplastic pollution in Lhasa was relatively low. This study provides valuable insights and a scientific foundation for future research on the prevention and control of atmospheric microplastic pollution in Lhasa and other ecologically sensitive cities.

Abundance and seasonal variation of microplastics in the effluents of a wastewater treatment plant: A case study in Greece

Microplastics (MPs) have been detected in numerous ecosystems worldwide. To better understand their distribution and establish a foundation for risk assessment protocols, detailed information on MP concentrations and polymer compositions is essential. This study assessed the presence and chemical composition of MPs, ranging from 5 mm to 125 µm, in the effluents of a Greek wastewater treatment plant (WWTP) over a one-year period to understand the temporal variation in MP input into the receiving water fidentification and mass data were obtained through pyrolysis coupled with gas chromatography/mass spectrometry (Py-GC/MS) analysis. The study found that fibers (50–78 %) were the predominant form of MPs compared to particles, with the most common size range being 125–200 μm for fibers and 200–2000 μm for particles. Py-GC/MS analysis indicated a clear dominance of polyolefins among the polymers analyzed, with MP mass concentrations ranging from 4.5 to 69.29 μg/L. Increased concentrations of MP items and mass were observed following rainfall events (due to elevated discharge and altered hydraulic parameters) and during windy conditions. This underscores the need for improved assessment of background parameters in future MP monitoring strategies. By providing data on MP input in WWTP effluents over a one-year period, this study enhances our understanding of seasonal MP dynamics and can serve as a crucial reference for future measurements.

Microplastics in the commercially available branded milk in Bangladesh: An emerging threat for human health

Microplastics (MPs) are polymer-based particles commonly found in diverse foods that pose serious human health impacts throughout the food chain. Assessment of MPs in different food products is a prime measure to combat MP-related food contamination. Therefore, this study first investigated the identification, characterization, and potential risks of MPs in the commercially available milk brands (19 dry powders and 06 liquid brands) in Bangladesh. The presence of MPs in milk samples was 279.47 ± 134.26 particles/kg and 182.27 ± 55.13 particles/L for powder and liquid milk, respectively, with a significant variety. Study findings displayed miscellaneous colors, fiber shapes (powder=78 %; liquid=81 %), > 0.1 mm sizes (powder=69 %; liquid=65 %), and polyethylene (powder=48 %; liquid=44 %) dominating MPs categories. The pollution load index indicated significant pollution due to the high abundance of MPs. Further, other risk-evaluating indices including contamination factor and Nemerow pollution index represent moderate to high MP-induced pollution for both milk samples. Low to moderate polymeric risks are exhibited by powder and liquid milk samples. Children could be exposed to 3.43 times higher MPs than adults through daily oral ingestion, which has significant health effects. This study found that powder milk was the most severely MPs induced risk than liquid milk. Consequently, this study finding established a reference point for MP contamination in milk, so special attention must be taken during production, storage, and packaging stages to reduce MP contamination.

Characteristics of microplastics and their abundance impacts on microbial structure and function in agricultural soils of remote areas in west China

As an emergent pollutant, microplastics (MPs) are becoming prevalent in the soil environment. However, the characteristics of MPs and the response of microbial communities to the abundance of MPs in agricultural soils in West China still need to be elucidated in detail. This study utilized the Agilent 8700 Laser Direct Infrared (LDIR) to analyze the characteristics of small-sized MPs (20–1000 μm) in soils from un-mulched and mulched agricultural fields in West China, and illustrated their correlation with microbial diversity. The results revealed a higher abundance of MPs in mulched soil ((4.12 ± 2.13) × 105 items kg−1) than that in un-mulched soil ((1.04 ± 0.26) × 105 items kg−1). The detected MPs were dominated by fragments, 20–50 μm and Polyamide (PA). High-throughput sequencing analysis indicated that alpha diversity (Chao1 and Shannon indices) in the plastisphere was lower compared to that in soil, and varied significantly with MPs abundance in soil. As the abundance of MPs increased, the proportion of soil about the degradation of organic matte and photoautotrophic taxa increased, which showed enrichment in the plastisphere. Functional predictions further indicated that MPs abundance affected potential soil functions, such as metabolic pathways associated with the C and N cycling. The plastisphere showed higher functional abundance associated with organic matter degradation, indicating higher potential health risks compared to soil environments. Based on the RDA analyses, it was determined that environmental physicochemical properties and MPs abundance had a greater impact on fungal communities than on bacterial communities. In general, the abundance of MPs affected the microbial diversity composition and potentially influenced the overall performance of soil ecosystems. This study offers empirical data on the abundance of MPs in long-term mulched agricultural fields and new insights for exploring the ecological risk issues associated with MPs.

First identification of microplastics in human uterine fibroids and myometrium

Microplastics (MPs) pollution has received widespread attention in recent years as the use of plastics continues to increase. However, currently no studies have reported the finding of MPs in human uterine fibroids (UFs) and myometrium tissues. In this study, UFs tissues (n = 48) and myometrium tissues (n = 40) from 48 patients and myometrium tissues (n = 8) from healthy population were collected. Following digestion of the samples by 10% KOH and 30% H2O2, MPs were analyzed qualitatively and quantitatively using Raman spectroscopy. The 16 UFs and myometrium tissue samples contained an average of 1.5 ± 1.17 MP particles per gram of tissue. Notably, the abundance of MPs in the UFs tissues (2.13 ± 1.17 particles per gram) was higher than in the myometrium tissues (0.88 ± 0.78 particles per gram). In the same cohort of individuals with UFs, the quantities of MPs detected in the affected UFs tissue (2.63 ± 1.77 particles per gram) exceeded those detected in healthy tissue (1.08 ± 0.93 particles per gram), particularly in elderly patients. A correlation was observed between elevated MP levels and frequent consumption of takeout meals and bottled water among patients, indicating that MP ingestion through food sources might have contributed to the increased abundance and variety of MPs within UFs. Furthermore, UFs increased in size with higher concentrations of MPs, which may have been related to elevated levels of MPs-induced hormones. This study provides new insights into the assessment of the relationship between exposure to MPs and human disease risk.

Appraisal of microplastic pollution and its related risks for urban indoor environment in Bangladesh using machine learning and diverse risk evolution indices

The widespread presence of Microplastics (MPs) is increasing in the indoor environment due to increasing annual plastic usage, which is becoming a global threat to human health. Therefore, this is the first research in Bangladesh to identify, and characterize, MP pollution and its allied threats to human health in the indoor urban environment, where 80 household dust samples were collected from the whole study area. The presence of MPs in household dust of the urban indoor environment was 25.8 ± 6.43 particles/g with a significant variety, whereas the fiber shape (73%), 0.5–1.00 mm ranged MPs size (58%), blue color (21%), and polystyrene polymer (34%) was the most ubiquitous MPs category. The pollution load index (1.61–2.96) indicated significant pollution due to the high abundance of MPs. Besides, other risks evaluating indices including contamination factor (1.00–3.51), and Nemerow pollution index (1.60–3.51) represent moderate to high MP-induced pollution. The polymer hazard index (119.54 ± 70.34) indicated significant risks for the selected polymers to the indoor environment living inhabitants. Machine learning approaches, especially random forest and support random vector machine were effective in predicting the number of MPs, where EC, salinity, pH, OC, and texture classes acted as controlling factors. Children and adults might be ingesting 4.12 ± 1.01 and 2.27 ± 0.57 particles/day through the ingestion exposure route, which has significant health effects. Polymer-associated lifetime cancer risk assessment results show that there are moderate risks for both adults and children, but children tend to be more susceptible to MP risks. The overall study found that Dhaka was the most severely MPs induced risky division among the others. This study reveals that high quantities of MPs in indoor environments could pose a serious health hazard' to different exposure groups.