Absorption Spectra Research Articles

N-Heterocycle-Substituted Hexa-peri-Hexabenzocoronenes with Windmill Architectures.

We describe the synthesis and computational investigation of N-heterocycle-substituted hexa-peri-hexabenzocoronenes (HBCs). Following our method for the preparation of thioether-substituted HBCs, we prepared pyrrole-, indole-, carbazole-, and 1H-benz[g]indole-substituted HBCs from the corresponding fluorinated precursors under microwave irradiation. A series of polysubstituted benzoindole-HBCs with windmill architectures was also synthesized using the polyfluorinated HBC analogs, and the substituent effects on the electronic properties of the HBC core were investigated. Similar to the thioether substituted HBCs, the nature of the heterocycle does not influence the optoelectronic properties of the HBC core. The attachment of multiple benzoindole substituents leads to a bathochromic shift of the absorption and emission spectra, comparable to our previous studies. Due to the circular arrangement of the benzoindole moiety, the attachment of multiple substituents results in the presence of multiple conformers at room temperature. The rotation barrier can be overcome by heating the compounds to 323-333 K. Additionally, the investigation of the relaxed geometries shows two π-stacking motifs within the conformers.

Computational Characterization of the DAD Photoisomerization: Functionalization, Protonation, and Solvation Effects.

Photoswitches are becoming increasingly popular in pharmacology due to the possibility of modifying their activity with light. Hence, it is crucial to understand the photophysics of these compounds to identify promising light-activated drugs. We focused our study on DAD, an azobenzene derivative that, according to a previous experimental investigation, can restore visual function in blind mice due to trans-cis photoisomerization upon light absorption. With the present computational study, we aim to characterize the absorption spectrum of DAD, and to understand its photoisomerization mechanism by means of conformational search analysis, quantum mechanical (QM) and hybrid QM/continuum calculations, and classical molecular dynamics simulations. Moreover, we explored the effect of the derivation (DAD vs azobenzene), the protonation (DAD vs DADH22+, the two possible protonation states) and the solvation (vacuum vs water) on the photoisomerization. Similarly to azobenzene, we showed that the photoisomerization of both protonation states of DAD begin with the population of the bright S2 state. Then, it crosses to the S1 surface and relaxes along the rotation of the azo dihedral to a S1/S0 crossing point. The latter is close to a transition state that connects the trans and cis geometries on the ground state. Finally, our results suggested that amino derivation, nonprotonation and water solvation could improve the quantum yield of the photoisomerization.

A Universal Interfacial Reconstruction Strategy Based on Converting Residual Alkali for Sodium Layered Oxide Cathodes: Marvelous Air Stability, Reversible Anion Redox, and Practical Full Cell.

Mn-based layered oxide cathodes have attracted widespread attention due to high capacity and low cost, however, poor air stability, irreversible phase transitions, and slow kinetics inhibit their practical application. Here, we propose a universal interfacial reconstruction strategy based on converting residual alkali to tunnel phase Na0.44MnO2 for addressing the above mentioned issue simultaneously, using O3 NaNi0.4Fe0.2Mn0.4O2@2 mol % Na0.44MnO2 (NaNFM@NMO) as the prototype material. The optimized material exhibits an initial capacity and energy density comparable with lithium-ion batteries. The reversible anionic redox behavior and charge compensation mechanism of NaNFM@NMO were analyzed and verified by soft X-ray absorption spectrum and in situ X-ray absorption spectrum. Due to the intrinsic stability of the tunnel structure, excellent air stability and highly reversible structure evolution of the NaNFM@NMO cathode material are achieved, which are confirmed by contact angle test, rigorous aging test, and in situ X-ray diffraction. More importantly, the NaNFM@NMO cathode demonstrates a great match with the nonpresodiated hard carbon anode and shows excellent electrochemical performance of the full cell. Additionally, such a strategy could be also applied to modify P2-type cathodes, showing superior universality and good prospects in industrialized production. Overall, the proposed strategy could improve air stability while remaining interfacial and bulk stable simultaneously and will open up a whole new field for the optimization of other electrode materials.

DFT and Model Hamiltonian Study of Optoelectronic Properties of Some Low-Symmetry Graphene Quantum Dots.

We have studied the electronic and optical properties of three low-symmetry graphene quantum dots (GQDs), with point-group symmetries C2v and C2h. For the calculations of linear optical absorption spectra, we employed both first-principles time-dependent density-functional theory (TDDFT) and the electron-correlated Pariser-Parr-Pople (PPP) model coupled with the configuration-interaction (CI) approach. In the PPP-CI approach, calculations were performed using both screened and standard parameters, along with efficiently incorporating electron correlation effects using multireference singles-doubles CI for both ground and excited states. We assume that the GQDs are saturated by hydrogen atoms at the edges, making them effectively polycyclic aromatic hydrocarbons (PAHs) dibenzo[bc,ef]coronene (also known as benzo(1,14)bisanthene, C30H14) and two isomeric compounds, dinaphtho[8,1,2abc;2',1',8'klm]coronene and dinaphtho[8,1,2abc;2',1',8'jkl]coronene with the chemical formula C36H16. The two isomers have different point group symmetries; therefore, this study will also help us understand the influence of symmetry on the optical properties. A common feature of the absorption spectra of the three GQDs is that the first peak representing the optical gap is of low to moderate intensity, while the intense peaks appear at higher energies. For each GQD, PPP model calculations performed with the screened parameters agree well with the experimental results of the corresponding PAH and also with the TDDFT calculations. To further quantify the influence of electron-correlation effects, we also computed the singlet-triplet gap (spin gap) of the three GQDs, and we found them to be significant.

Thermal, Optical, and Emission Traits of SM3+-Ion-Doped Fluoride/Chloride/Oxide Glass for Red/Orange Laser Fiber Applications

This study examined spectroscopic, thermal, and other qualities, such as the lasing parameters, of Sm3+-doped glass with the composition 40P2O5–30ZnO–20LiCl–10BaF2. The ellipsometric data were used in a Sellmeier dispersion relation to estimate the refractive index values of the glasses investigated. The measured absorption spectra of the doped glass reveal the presence of various absorption bands assigned to transitions from the 6H5/2 ground state attributed to Sm3+-ion-excited states. We studied the decay of the 4G5/2 level of the Sm3+ ions in the doped glass by analyzing its absorption and emission fluorescence spectra. The Judd–Ofelt hypothesis allowed us to determine that the quantum efficiency of the 4G5/2–6H7/2 transition is high: 96% and 97% for glass doped with 4.05 × 1019 ions/cm−3 and 11 × 1019 ions/cm−3, respectively. Furthermore, this glass exhibits efficient red/orange enhanced spontaneous emission that matches the excitation band of the photosensitizer material used in medical applications.

Minimizing Voltage Deficit in Perovskite Indoor Photovoltaics by Interfacial Engineering.

Metal halide perovskites with bandgap of ≈1.8eV are competitive candidates for indoor photovoltaic (IPV) devices, owing to their superior photovoltaic properties and ideal absorption spectra matched to most indoor light sources. However, these perovskite IPVs suffer from severe trap induced non-radiative recombination, resulting in large open-circuit voltage (VOC) losses, particularly under low light intensity. Herein, an effective approach is developed to minimizing trap density by modifying the buried interface of perovskite layer with bifunctional molecular 2-(4-Fluorophenyl)ethylamine Hydrobromide (F-PEABr). The benzene ring of F-PEABr molecules can firmly anchor at the hole transporting layer by π-π stacking interaction, and the other ends can passivate the defects on the buried interface of perovskite layer. Based on that, the F-PEABr modified perovskite IPVs achieved power conversion efficiency (PCE) of 42.3% with a remarkable VOC of 1.13V under 1000 lux illumination from a 4000K LED lamp. Finally, perovskite IPV mini-modules with area of 10.40cm2 are demonstrated with a PCE of 35.2%. This interface modification strategy paves the way for crafting high-performance perovskite IPVs, holding great potential for self-powered internet of things applications.

Improved conduction and orbital polarization in ultrathin LaNiO3 sublayer by modulating octahedron rotation in LaNiO3/CaTiO3 superlattices.

Artificial oxide heterostructures have provided promising platforms for the exploration of emergent quantum phases with extraordinary properties. Here, we demonstrate an approach to stabilize a distinct oxygen octahedron rotation (OOR) characterized by in the ultrathin LaNiO3 sublayers of the LaNiO3/CaTiO3 superlattices. Unlike the OOR in the LaNiO3 bare film, the OOR favors high conductivity, driving the LaNiO3 sublayer to a metallic state of ~100 K even when the layer thickness is as thin as 2 unit cells (u.c.). Simultaneously, strongly preferred occupation of orbital is achieved in LaNiO3 sublayers. The largest change of occupancy is as high as 35%, observed in the 2 u.c.-thick LaNiO3 sublayers sandwiched between 4 u.c.-thick CaTiO3 sublayers. X-ray absorption spectra indicate that the OOR pattern of LaNiO3 achieved in the LaNiO3/CaTiO3 heterostructures has significantly enhanced the Ni-3d/O-2p hybridization, stabilizing the metallic phase in ultrathin LaNiO3 sublayers. The present work demonstrates that modulating the mode of OOR through heteroepitaxial synthesis can modify the orbital-lattice correlations in correlated perovskite oxides, revealing hidden properties of the materials.

TiO2 Surface Hybridisation with Ag and CuO for Solar‐Assisted Environmental Remediation and Sustainable Energy Applications

AbstractIndustrialisation has led to unprecedented levels of outdoor air pollution, posing a significant health risk to human beings. Consequently, there is an urgent need to replace fossil fuels with sustainable energy sources, thereby mitigating these risks and providing a safer outdoor and indoor environment. Titanium dioxide is a versatile transition metal oxide with applications ranging from energy conversion to environmental remediation. However, it faces limitations, particularly in its absorption spectrum and charge separation efficiency, and enhancing these properties remains a significant challenge. In this research work, we have decorated the surface of TiO2 hybridising it with noble‐metal and/or noble‐metal oxides (Ag and/or CuO) to improve the photocatalytic performances (monitoring the removal of nitrogen oxides and benzene, and hydrogen generation from water splitting) under simulated solar‐light irradiation. Our results showed that titania modified with an Ag : Cu molar ratio equal to 1 : 1, not only exhibited the most promising performance in terms of nitrogen oxides and benzene removal, it was the optimum amount for the light‐induced generation of hydrogen from water splitting.

Investigating Excited States and Absorption Spectra of the Poly-cyclopenta-dithiophene-benzothiadiazole Oligomers (Poly-CPDTBT)—A Theoretical Study

Investigating Excited States and Absorption Spectra of the Poly-cyclopenta-dithiophene-benzothiadiazole Oligomers (Poly-CPDTBT)—A Theoretical Study

Biofabrication and Characterisation of Ni‐Doped SnO2 Nanoparticles With Enhanced Cytotoxicity, Antioxidant, Antimicrobial and Photocatalytic Activities

ABSTRACTThe present work focuses on Annona muricata leaf extract–mediated green synthesis of pure and nickel‐doped tin oxide nanoparticles for 3%, 5% and 7% concentrations. The properties of the obtained nanoparticles were investigated through XRD, FTIR, XPS, HRTEM–SAED, SEM–EDX and UV–visible spectroscopy techniques. The XRD pattern reveals all samples have tetragonal structures with high crystallinity. The Sn–O stretching vibration has been confirmed through FTIR spectra. The XPS results demonstrate that Sn0.93Ni0.07O2 nanoparticles have Sn3d, Ni2p and O1s oxidation states. EDX spectra contain Ni, Sn and O elements, which indicate the purity of the samples. UV–visible absorption spectrum shows decreases in optical energy bandgap with increases in nickel dopant concentration. The samples exhibit notable antibacterial activity against P. aeruginosa and S. aureus. Also, Sn0.93Ni0.07O2 nanoparticle has higher antifungal activity against A. niger than against C. albicans. Moreover, SnO2 nanoparticles have considerable antioxidant activity in DPPH scavenging compared to Sn0.93Ni0.07O2 nanoparticles. Furthermore, SnO2 nanoparticles have a better cytotoxic effect for L929 normal fibroblast cell lines with an LD50 value of 146.42 μg/mL. Additionally, the photocatalytic activity of SnO2 and Sn0.93Ni0.07O2 nanoparticles was done against methylene blue dye under direct sunlight irradiation. Overall, environmentally friendly synthetic pure and Ni‐doped SnO2 nanoparticles can be used in wastewater filter technologies as well as in medical aids due to their better cytotoxic, antioxidant and antimicrobial effects.

Fabrication of 0.6 eV Bandgap In0.69Ga0.31As Thermophotovoltaic Cells and Its System Demonstration

Thermophotovoltaic (TPV) is a promising energy conversion technology that can absorb the heat from a thermal radiator and transfer it into power. As the most significant energy converter, TPV cells need a narrower bandgap to realize a wider absorption spectrum range. In this work, the fabrication and characterization of single‐junction In0.69Ga0.31As TPV cells with a bandgap of 0.6 eV are presented. The main structure is grown on an InP substrate through metal‐organic chemical vapor deposition. Step‐graded InAsyP1−y buffer layers are used to mitigate the dislocations by relaxing the stress induced by lattice mismatch completely. Analysis of the composition, strain relaxation, layer tilt, and crystalline quality of each layer is demonstrated using triple‐axis X‐ray reciprocal space mapping and transmission electron microscopy. According to the tested results, each layer is found to be nearly fully relaxed and the InGaAs active layer grown on the buffer displays a high crystal quality. External quantum efficiency achieves 90% at 1100–1500 nm. Additionally, a TPV test platform is constructed to evaluate the cell performance. The maximum efficiency of the lattice‐mismatched TPV cell reaches 21.92% operating at a power density of 267.4 mW cm−2 and an emitter temperature of 1200 °C.

Creating Spin Channels in SrCoO3 through Trigonal‐to‐Cubic Structural Transformation for Enhanced Oxygen Evolution/Reduction Reactions

AbstractOxygen evolution and reduction reactions (OER and ORR) play crucial roles in energy conversion processes such as water splitting and air batteries, where spin dynamics inherently influence their efficiency. However, the specific contribution of spin has yet to be fully understood. In this study, we intentionally introduce a spin channel through the transformation of trigonal antiferromagnetic SrCoO2.5 into cubic ferromagnetic SrCoO3, aiming to deepen our understanding of spin dynamics in catalytic reactions. Based on the results from spherical‐aberration‐corrected microscopy, synchrotron absorption spectra, magnetic characterizations, and density functional theory calculations, it is revealed that surface electron transfer is predominantly governed by local geometric structures, while the presence of the spin channel significantly enhances the bulk transport of spin‐polarized electrons, particularly under high current densities where surface electron transfer is no longer the limiting factor. The overpotential for OER is reduced by at least 70 mV at 150 mA cm−2 due to the enhanced conductivity from spin‐polarized electrons facilitated by spin channels, with an expectation of even more significant reductions at higher current densities. This work provides a clearer picture of the role of spin in oxygen‐involved electrocatalysis, providing critical insights for the design of more efficient catalytic systems in practical applications.

Approximation of the Absorption Spectrum of Indium Phosphide in the Context of Simulation of the Process of Sensitivity Enhancement

Examines the fundamental rights of Phosphide of India, legitimized by Tellur and, in the last resort, compensated for. Data on the composition of four high-quality images of the InP: Cu photoelectronic spectrum are presented in the individual layers. The work is characterized by the semi-empiric approach to photoconduction of InP: Cu oxide films. It is concluded that the photoresistance Iph (α(ћω)) was analytically approximated as the function of the experimental-complete spectral distribution of the coefficiency phosphorus india. It is proposed to use five approximating functions with the aim of analyzing the coefficient of absorption of Indian phosphorus α(ћω). Completed 5 locations with different signs of median isolation. On the basis of analytical amplitudes, the complete analytical amplitude Iph(α(ћω)) is modelled. Analogously, five conclusions were drawn that indicate a sign of median isolation. Five non-stationary measures of IF photometry have been taken (as two functions: co-efficiency of exposure, as photo energy functions, and time-consuming observations) in normal situations. The answer to the question is the most mathematical and physical solution of the proximate function α(ћω). Obviously, it shows that this the degree of variance is optimal for its implementation (inclusion of this degree of variance in the structure Iph = f(α) and α = f(ћω)) of the complete analytical description of the process photoconductivity. It should be noted that subsequent research may be based on the establishment of physical bases of photoconductivity in the short wave of fundamental transfers of phosphorus from India, as well as research into the properties of air on the high InP: Cu layer, with its stability and stability.

Saturated absorption spectroscopy of 87Rb atoms using structured light: Observation of narrow hyperfine and crossover resonances

Abstract An experiment on the saturated absorption spectroscopy (SAS) of 87Rb-D2 line is performed using the Laguerre-Gaussian (LG) beam as structured light. The theoretical simulation of which is done by considering a four-level atom-laser coupled system. The theoretically simulated spectra fairly match with the experimentally observed spectra. The line-width narrowing behavior of both the observed hyperfine and crossover resonances in the Doppler-broadened probe absorption spectra is attributed by the spatially dependent Rabi frequency of the pump LG beam irrespective of the characteristics of the probe beam. The results also illustrated that the narrowing behavior of the line shapes of the hyperfine structure using the LG beam is universal in nature, i.e. irrespective of hyperfine or crossover transitions. This structured light-induced narrowing of line-width of the sub Doppler hyperfine and crossover resonances can be utilized for high-precision laser frequency locking at a particular hyperfine or crossover transition. Moreover, a significant narrowing of hyperfine and crossover resonances with the variation of the orbital angular momentum (OAM) number of the LG beam shows that the generated SAS signal can be manipulated by using the OAM of the structured light as a control knob.

Tunable diode laser absorption spectroscopy monitoring of the water vapor condensation process in the high-speed flow

Abstract In this work, non-invasive high-precision quantitative measurements of the water vapor condensation process have been carried out using tunable diode laser absorption spectroscopy(TDLAS) at the sub-millisecond level. The high-speed condensation of water vapor is achieved by a self-designed rarefaction wave reflection system. Combined with different sizes of experimental cavities, the condensation process is realised at various time scales of sub-milliseconds (0.2-0.66 ms). The processes of temperature and water vapor content during the high-speed condensation are measured using the water vapor absorption spectra near 7168.437 cm-1 and 7185.597 cm^-1. The experimental results show that the hypervelocity expansion flow field generated by the experimental system demonstrates good uniformity and reaches a cooling rate of 10^5 K/s, which has the same order as that of the supersonic nozzle. The condensation process is similar on different sub-millisecond timescales and the normalised temperature change curves are approximately the same. Moreover, the higher the water vapor content, the shorter the condensation time.

Novel Syntheses of Wide-Band Gap Semiconducting CdxZnx−1Co2O4 of Spinel Nanostructure: Characterization and Optical Properties

AbstractCadmium doped zinc cobaltite spinel structure in the form of CdxZnx-1Co2O4 (0 ≤ x ≤ 1) are synthesized by sol-gel method. The energy dispersive X-ray spectra confirm the synthesis of pure ZnCo2O4 and Cd doped samples nanoparticles. Scanning and transmission electron microscopes images of Cd ZnCo2O4 samples show the cubic crystal structure of the nanoparticles. A good crystallinity of the ZnCo2O4 and its dopants samples are indicated by the sharpness and strong peaks of X-ray diffraction patterns. The particle size is independent of the ratio of incorporated Cd into the ZnCo2O4 matrix. The FT-IR transmission spectrum of each Cdx Zn1-xCo2O4 complex shows two strong vibration peaks that are ascribed to the spinel structure’s octahedral and tetrahedral. The absorption spectra reveal three distinct absorption characteristics for Cdx Znx-1Co2O4 peaking at 268, 532 and 778 nm due to the photoexcitation of electrons from O 2p to Co 3d transitions and d-d transition of Co 3d. N2 adsorption–desorption isotherms for Cdx Znx-1Co2O4 indicate are carried out.

Creating Spin Channels in SrCoO3 through Trigonal-to-Cubic Structural Transformation for Enhanced Oxygen Evolution/Reduction Reactions.

Oxygen evolution and reduction reactions (OER and ORR) play crucial roles in energy conversion processes such as water splitting and air batteries, where spin dynamics inherently influence their efficiency. However, the specific contribution of spin has yet to be fully understood. In this study, we intentionally introduce a spin channel through the transformation of trigonal antiferromagnetic SrCoO2.5 into cubic ferromagnetic SrCoO3, aiming to deepen our understanding of spin dynamics in catalytic reactions. Based on the results from spherical-aberration-corrected microscopy, synchrotron absorption spectra, magnetic characterizations, and density functional theory calculations, it is revealed that surface electron transfer is predominantly governed by local geometric structures, while the presence of the spin channel significantly enhances the bulk transport of spin-polarized electrons, particularly under high current densities where surface electron transfer is no longer the limiting factor. The overpotential for OER is reduced by at least 70 mV at 150 mA cm-2 due to the enhanced conductivity from spin-polarized electrons facilitated by spin channels, with an expectation of even more significant reductions at higher current densities. This work provides a clearer picture of the role of spin in oxygen-involved electrocatalysis, providing critical insights for the design of more efficient catalytic systems in practical applications.

Triple-junction Dion-Jacobson perovskite tandem solar cells: advancing efficiency via interface optimization and broadened light absorption spectrum

Abstract Dion-Jacobson (DJ) perovskites have emerged as game-changers in the world of photovoltaics due to their unique combination of advantages like cost-effective fabrication, tailorable bandgap, and exceptional efficiency. Further, in this study, MXene contacts have been utilized with 2D-perovskites solar cells to leverage the advantages of both, leading to improved stability, superior charge transport, and adjustable energy bandgap without the occurrence of pinhole effects. To further tap into the immense potential of perovskites, this study explores the power of a triple-junction All DJ perovskite tandem solar cell (ADJT-PSC) architecture. This design captures a broader spectrum of sunlight, maximizing energy harvesting and unlocking new possibilities for photovoltaic devices. In this symphony of light and power, 1.5-pentamethylenediamine (PeDA) methylammonium lead iodide (PeDAMAPb2I7) (1.98 eV), PeDAMA5Pb6I19 (1.6 eV), CsLaTa2Se7 (1.1 eV) take as the absorber layers in the top, middle, and bottom subcells, respectively. Moreover, optimizing the thickness of each perovskite layer is crucial for maximizing efficiency. This study conducted a thorough analysis and identified the ideal 350 nm/550 nm/200 nm thicknesses for the top/middle/bottom layers, respectively. Furthermore, the study explored the art of doping variation in the electron and hole transport layers. By meticulously adjusting the doping levels, ADJT-PSC can achieve a maximum efficiency of 35%.

Cu2O/TiO2 Heterostructure‐Based Photoelectrochemical Photodetector with Enhanced Performance and Stability

Cu2O/TiO2 heterostructure is prepared by electrodepositing Cu2O on rutile phase TiO2 particles. The morphology, structural, and optical properties of Cu2O/TiO2 heterostructure are determined by scanning electron microscopy, Raman spectroscopy, X‐ray diffractometer, and UV–vis absorption spectrum. The Cu2O/TiO2 heterostructure photoelectrochemical‐type photodetector is constructed based on this heterostructure. Experimental results show that the photoresponsivity and visible light absorption of the Cu2O/TiO2 heterostructure are significantly enhanced compared to those of TiO2 and Cu2O which demonstrate that the Cu2O/TiO2 heterostructure with a special interfacial structure is conducive to accelerating the separation and transfer of photogenerated carriers. The photoresponsivity and photocurrent density of Cu2O/TiO2 can reach 154 μA W−1 and 15.6 μA cm−2 at 0 V. In addition, the photocurrent density of the Cu2O/TiO2 heterostructure steadily increases with the enhancement of irradiation power density. Moreover, no significant attenuation of the photocurrent density is observed in the prepared Cu2O/TiO2 heterostructure after 1800 s of photo‐on/off cycles. These results suggest that the Cu2O/TiO2 heterostructure‐based photodetector holds great potential in the photodetection field.

A Review on Pyridine Based Colorimetric and Fluorometric Chemosensor for Detection of Hg2+ ion.

Pyridine, N-containing heterocyclic organic compound, displays strong coordination capabilities with various metal ions. It can be synthesized through various methods, such as Friedlander synthesis, heterocumulene synthesis, cross-coupling reactions, the Radziszewski reaction, Bonnemann cyclization, as well as cobalt-catalyzed synthesis. Experimental and spectroscopic analyses have demonstrated a strong binding affinity between pyridine and several heavy metal ions, including Pb2+, Hg2+, and Cd2+ ions. The escalating environmental pollution caused by the disposal of heavy metal ions in rivers, open air, and water reservoirs poses a significant threat to both ecosystem and human health. To address these environmental challenges, a cost-effective and easily synthesized chemosensor has been prepared for identifying toxic heavy metal ions in various samples. Pyridine's photophysical properties make it an effective sensor for detecting Hg2+ ions, displaying fluorescence quenching or enhancement in their presence. The coordination between pyridine and Hg2+ ions lead to shifts in the absorption spectra. The pyridine-based sensor has been evaluated for its sensitivity, selectivity, and detection limits under different experimental conditions. Pyridine's solubility and environmental stability make it applicable for real-time detection, making pyridine probes valuable tool for monitoring toxic Hg2+ ions in the environment. The results demonstrate that the pyridine-based chemosensor exhibits good selectivity and sensitivity for targeting Hg2+ ions, with detection limits within acceptable ranges. This review (from years 2011 to 2023) emphasizes the preparation of various substituted pyridine compounds as selective, sensitive, and specific sensors for real-time detection of Hg2+ ions.