Α-hemolysin Nanopore Research Articles

Nanopore Event-Transduction Signal Stabilization for Wide pH Range under Extreme Chaotrope Conditions.

Operation of an α-hemolysin nanopore transduction detector is found to be surprisingly robust over a critical range of pH (6–9), including physiological pH = 7.4 and polymerase chain reaction (PCR) pH = 8.4, and extreme chaotrope concentration, including 5 M urea. The engineered transducer molecule that is captured in the standard α-hemolysin nanopore detector, to transform it into a transduction detector, appears to play a central role in this stabilization process by stabilizing the channel against gating during its capture. This enables the nanopore transduction detector to operate as a single molecule “nanoscope” in a wide range of conditions, where tracking on molecular state is possible in a variety of different environmental conditions. In the case of streptavidin biosensing, results are shown for detector operation when in the presence of extreme (5 M) urea concentration. Complications involving degenerate states are encountered at higher chaotrope concentrations, but since the degeneracy is only of order two, this is easily absorbed into the classification task as in prior work. This allows useful detector operation over a wide range of conditions relevant to biochemistry, biomedical engineering, and biotechnology.

Single-molecule analysis of lead(II)-binding aptamer conformational changes in an α-hemolysin nanopore, and sensitive detection of lead(II)

The α-hemolysin (αHL) nanopore is capable of analyzing DNA duplex and DNA aptamer as they can be electrophoretically driven into the vestibule from the cis entrance. The current study describes the competitive interaction induced by Pb2+ that changes the secondary structure of DNA duplex in asymmetrical electrolyte solution. DNA duplex formed by the partial complementary DNA and DNA aptamer sequence produced unzipping blockages with the dwell unzipping time lasting 2.84 ± 0.7 ms. By cation-DNA interaction with Pb2+, the DNA duplex will unwind and then form Pb2+-stabilized-DNA aptamer, which will be captured and unfolded in vestibule. The pore conductance were reduced to 54 % and 94 % with mean dwell unfolding times of 165 ± 12 ms. The competitive behavior between Pb2+ and single-strand DNA was further utilized to detect Pb2+ in solution with a detection limit of 0.5 nM. This nanopore platform also provides a powerful tool for studying the cation-DNA interactions in DNA aptamer conformational changes. Thus, the results drawn from these studies provide insights into the applications of α-hemolysin nanopore as a molecular sieve to different DNA secondary structure in future application of nanopore analysis.

Single pyrimidine discrimination during voltage-driven translocation of osmylated oligodeoxynucleotides via the α-hemolysin nanopore.

The influence of an electric field on an isolated channel or nanopore separating two compartments filled with electrolytes produces a constant ion flux through the pore. Nucleic acids added to one compartment traverse the pore, and modulate the current in a sequence-dependent manner. While translocation is faster than detection, the α-hemolysin nanopore (α-HL) successfully senses base modifications in ssDNA immobilized within the pore. With the assistance of a processing enzyme to slow down translocation, nanopore-based DNA sequencing is now a commercially available platform. However, accurate base calling is challenging because α-HL senses a sequence, and not a single nucleotide. Osmylated DNA was recently proposed as a surrogate for nanopore-based sequencing. Osmylation is the addition of osmium tetroxide 2,2’-bipyridine (OsBp) to the C5–C6 pyrimidine double bond. The process is simple, selective for deoxythymidine (dT) over deoxycytidine (dC), unreactive towards the purines, practically 100% effective, and strikingly independent of length, sequence, and composition. Translocation of an oligodeoxynucleotide (oligo) dA10XdA9 via α-HL is relatively slow, and exhibits distinct duration as well as distinct residual current when X = dA, dT(OsBp), or dC(OsBp). The data indicate that the α-HL constriction zone/β-barrel interacts strongly with both OsBp and the base. A 23 nucleotide long oligo with four dT(OsBp) traverses 18-times slower, and the same oligo with nine (dT+dC)(OsBp) moieties traverses 84-times slower compared to dA20, suggesting an average rate of 40 or 180 μs/base, respectively. These translocation speeds are well above detection limits, may be further optimized, and clear the way for nanopore-based sequencing using osmylated DNA.

Alkyl detection facilitated by a DNA conjugate with an α-hemolysin nanopore

A novel α-hemolysin nanopore (α-HL) based strategy for the detection of an alkyl linker at the single-molecule level.

Energetics of base flipping at a DNA mismatch site confined at the latch constriction of α-hemolysin.

Unique, two-state modulating current signatures are observed when a cytosine-cytosine mismatch pair is confined at the 2.4 nm latch constriction of the α-hemolysin (αHL) nanopore. We have previously speculated that the modulation is due to base flipping at the mismatch site. Base flipping is a biologically significant mechanism in which a single base is rotated out of the DNA helical stack by 180°. It is the mechanism by which enzymes are able to access bases for repair operations without disturbing the global structure of the helix. Here, temperature dependent ion channel recordings of individual double-stranded DNA duplexes inside αHL are used to derive thermodynamic (ΔH, ΔS) and kinetic (EA) parameters for base flipping of a cytosine at an unstable cytosine-cytosine mismatch site. The measured activation energy for flipping a cytosine located at the latch of αHL out of the helix (18 ± 1 kcal mol-1) is comparable to that previously reported for base flipping at mismatch sites from NMR measurements and potential mean force calculations. We propose that the αHL nanopore is a useful tool for measuring conformational changes in dsDNA at the single molecule level.

Single molecule study of initial structural features on the amyloidosis process.

We employed an α-hemolysin (α-HL) nanopore as a single-molecule tool to investigate the effects of initial structure on the amyloidosis process. The differences in the initial structure of two β-amyloid (Aβ) peptides (Aβ25-35 and Aβ35-25) could be distinguished in real-time due to their characteristic blockades. More importantly, the distinct aggregate dynamics for these two kinds of Aβ fragments can be readily analyzed by monitoring the blockade frequency over time.

Unzipping of A-Form DNA-RNA, A-Form DNA-PNA, and B-Form DNA-DNA in the α-Hemolysin Nanopore

Unzipping of double-stranded nucleic acids by an electric field applied across a wild-type α-hemolysin (αHL) nanopore provides structural information about different duplex forms. In this work, comparative studies on A-form DNA-RNA duplexes and B-form DNA-DNA duplexes with a single-stranded tail identified significant differences in the blockage current and the unzipping duration between the two helical forms. We observed that the B-form duplex blocks the channel 1.9 ± 0.2 pA more and unzips ∼15-fold more slowly than an A-form duplex at 120 mV. We developed a model to describe the dependence of duplex unzipping on structure. We demonstrate that the wider A-form duplex (d = 2.4 nm) is unable to enter the vestibule opening of αHL on the cis side, leading to unzipping outside of the nanopore with higher residual current and faster unzipping times. In contrast, the smaller B-form duplexes (d = 2.0 nm) enter the vestibule of αHL, resulting in decreased current blockages and slower unzipping. We investigated the effects of varying the length of the single-stranded overhang, and studied A-form DNA-PNA duplexes to provide additional support for the proposed model. This study identifies key differences between A- and B-form duplex unzipping that will be important in the design of future probe-based methods for detecting DNA or RNA.

Selective Detection of 8-Oxo-2'-deoxyguanosine in Single-Stranded DNA via Nanopore Sensing Approach.

We have developed a nanopore sensing approach for the selective detection of 8-oxo-2'-deoxyguanosine (8-oxoG) in single-stranded DNA. First, 1,12-dodecanediamine is coupled with 8-oxoG-containing DNA molecules in high yield which leaves a free amine group for subsequent attaching of an adamantane moiety. After incubation with cucurbit[7]uril, the host-guest complex-modified DNA hybrid is translocated through an α-hemolysin nanopore. Highly characteristic events can be recorded and used to quantify the 8-oxoG-DNA content in a DNA mixture. Compared with the existing methods, this study provides a reliable, quick, and low-cost approach for the detection of 8-oxoG site in single-stranded DNA at the single-molecule level, particularly suitable for high-throughput screening of a massive number of samples.

Human Telomere G-Quadruplexes with Five Repeats Accommodate 8-Oxo-7,8-dihydroguanine by Looping out the DNA Damage

Inflammation and oxidative stress generate free radicals that oxidize guanine (G) in DNA to 8-oxo-7,8-dihydroguanine (OG), and this reaction is prominent in the G-rich telomere sequence. In telomeres, OG is not efficiently removed by repair pathways allowing its concentration to build, surprisingly without any immediate negative consequences to stability. Herein, OG was synthesized in five repeats of the human telomere sequence (TTAGGG)n, at the 5'-G of the 5'-most, middle, and 3'-most G tracks, representing hotspots for oxidation. These synthetic oligomers were folded in relevant amounts of K(+)/Na(+) to adopt hybrid G-quadruplex folds. The structural impact of OG was assayed by circular dichroism, thermal melting, (1)H NMR, and single-molecule profiling by the α-hemolysin nanopore. On the basis of these results, OG was well accommodated in the five-repeat sequences by looping out the damaged G track to allow the other four tracks to adopt a hybrid G-quadruplex. These results run counter to previous studies with OG in four-repeat telomere sequences that found OG to be highly destabilizing and causing significant reorientation of the fold. When taking a wider view of the human telomere sequence and considering additional repeats, we found OG to cause minimal impact on the structure. The plasticity of this repeat sequence addresses how OG concentrations can increase in telomeres without immediate telomere instability or attrition.

Fluctuating bottleneck model studies on kinetics of DNA escape from α-hemolysin nanopores.

We have proposed a fluctuation bottleneck (FB) model to investigate the non-exponential kinetics of DNA escape from nanometer-scale pores. The basic idea is that the escape rate is proportional to the fluctuating cross-sectional area of DNA escape channel, the radius r of which undergoes a subdiffusion dynamics subjected to fractional Gaussian noise with power-law memory kernel. Such a FB model facilitates us to obtain the analytical result of the averaged survival probability as a function of time, which can be directly compared to experimental results. Particularly, we have applied our theory to address the escape kinetics of DNA through α-hemolysin nanopores. We find that our theoretical framework can reproduce the experimental results very well in the whole time range with quite reasonable estimation for the intrinsic parameters of the kinetics processes. We believe that FB model has caught some key features regarding the long time kinetics of DNA escape through a nanopore and it might provide a sound starting point to study much wider problems involving anomalous dynamics in confined fluctuating channels.

Identification of DNA lesions using a third base pair for amplification and nanopore sequencing

Damage to the genome is implicated in the progression of cancer and stress-induced diseases. DNA lesions exist in low levels, and cannot be amplified by standard PCR because they are frequently strong blocks to polymerases. Here, we describe a method for PCR amplification of lesion-containing DNA in which the site and identity could be marked, copied and sequenced. Critical for this method is installation of either the dNaM or d5SICS nucleotides at the lesion site after processing via the base excision repair process. These marker nucleotides constitute an unnatural base pair, allowing large quantities of marked DNA to be made by PCR amplification. Sanger sequencing confirms the potential for this method to locate lesions by marking, amplifying and sequencing a lesion in the KRAS gene. Detection using the α-hemolysin nanopore is also developed to analyse the markers in individual DNA strands with the potential to identify multiple lesions per strand.

Differentiation of G:C vs A:T and G:C vs G:mC Base Pairs in the Latch Zone of α-Hemolysin.

The α-hemolysin (α-HL) nanopore can detect DNA strands under an electrophoretic force via many regions of the channel. Our laboratories previously demonstrated that trapping duplex DNA in the vestibule of wild-type α-HL under force could distinguish the presence of an abasic site compared to a G:C base pair positioned in the latch zone at the top of the vestibule. Herein, a series of duplexes were probed in the latch zone to establish if this region can detect more subtle features of base pairs beyond the complete absence of a base. The results of these studies demonstrate that the most sensitive region of the latch can readily discriminate duplexes in which one G:C base pair is replaced by an A:T. Additional experiments determined that while neither 8-oxo-7,8-dihydroguanine nor 7-deazaguanine opposite C could be differentiated from a G:C base pair, in contrast, the epigenetic marker 5-methylcytosine, when present in both strands of the duplex, yielded new blocking currents when compared to strands with unmodified cytosine. The results are discussed with respect to experimental design for utilization of the latch zone of α-HL to probe specific regions of genomic samples.

Click Addition of a DNA Thread to the N-Termini of Peptides for Their Translocation through Solid-State Nanopores.

Foremost among the challenges facing single molecule sequencing of proteins by nanopores is the lack of a universal method for driving proteins or peptides into nanopores. In contrast to nucleic acids, the backbones of which are uniformly negatively charged nucleotides, proteins carry positive, negative and neutral side chains that are randomly distributed. Recombinant proteins carrying a negatively charged oligonucleotide or polypeptide at the C-termini can be translocated through a α-hemolysin (α-HL) nanopore, but the required genetic engineering limits the generality of these approaches. In this present study, we have developed a chemical approach for addition of a charged oligomer to peptides so that they can be translocated through nanopores. As an example, an oligonucleotide PolyT20 was tethered to peptides through first selectively functionalizing their N-termini with azide followed by a click reaction. The data show that the peptide-PolyT20 conjugates translocated through nanopores, whereas the unmodified peptides did not. Surprisingly, the conjugates with their peptides tethered at the 5'-end of PolyT20 passed the nanopores more rapidly than the PolyT20 alone. The PolyT20 also yielded a wider distribution of blockade currents. The same broad distribution was found for a conjugate with its peptide tethered at the 3'-end of PolyT20, suggesting that the larger blockades (and longer translocation times) are associated with events in which the 5'-end of the PolyT20 enters the pore first.

The effect of secondary structures on the generation of characteristic events during the translocation of DNA hybrid through α-hemolysin

Nanopore has been developed to be a powerful, single-molecule analytical tool for sensing ions, small organic molecules and biomacromolecules such as proteins and DNAs. Generally, the identity of the analyte can be revealed by current amplitude changes and mean dwell time of the analyte binding events. In some cases, generation of highly characteristic current events affords an alternative way of analyte determination with high confidence level. However, we found that secondary structures in DNA/RNA hybrids might severely hinder the generation of signature events during their translocation through α-hemolysin nanopore. In this report, we propose a strategy to add a certain concentration of urea in the buffer solution for single channel recordings and validate that low concentration of urea can effectively denature the secondary structures in DNA hybrids and recover the generation of signature events. This finding might be useful in other secondary structure-related nanopore sensing activities. © 2015 Science China Press and Springer-Verlag Berlin Heidelberg

Concentration Gradient Effect on the Capturing Ratio of Nanopore for DNA

As the single molecules detection tool, nanopore is applied in more and more fields, such as medicine controlled delivery, ion conductance microscopes, nanosensors and DNA sequencing. When molecules pass through a nanopore, they will physically block the pore and produce measurable changes in ionic currents under an external electrical potential. Based on analyzing the resultant electrical signals, it is possible to detect various bio-molecules.Generally, the capturing ratio of nanopre for molecules is dependent on the intensity of electrical potential, to which the duration time of event is inversely proportional. It is difficult to analyze the too short duration time. Therefore, we investigate the study on concentration gradient of ionic solution effect on the capturing ratio of nanopore for DNA, which is in order to get the higher capturing ratio with the invariant duration time.In the experiments, we add different concentration solution in trans and cis parts of naopore separately to form the concentration gradient. We use three different types nanopore (α-hemolysin nanopore, Si3N4 membrane nanopore, glass capillary nanopore) to compare and get the similar results. The events of DNA translocating through nanopore are observed more compressed during the fixed time under the higher concentration gradient and there is no change to the duration time of DNA passing through the nanopore. It is demonstrated that concentration gradient could increase the capturing ratio of nanopore for DNA.

All-Atom Molecular Dynamics Simulation of Protein Translocation through an α-Hemolysin Nanopore.

Nanopore sensing is attracting the attention of a large and varied scientific community. One of the main issues in nanopore sensing is how to associate the measured current signals to specific features of the molecule under investigation. This is particularly relevant when the translocating molecule is a protein and the pore is sufficiently narrow to necessarily involve unfolding of the translocating protein. Recent experimental results characterized the cotranslocational unfolding of Thioredoxin (Trx) passing through an α-hemolisin pore, providing evidence for the existence of a multistep process. In this study we report the results of all-atom molecular dynamics simulations of the same system. Our data indicate that Trx translocation involves two main barriers. The first one is an unfolding barrier associated with a translocation intermediate where the N-terminal region of Trx is stuck at the pore entrance in a conformation that strongly resembles the native one. After the abrupt unfolding of the N-terminal region, the Trx enters the α-hemolisin vestibule. During this stage, the constriction is occupied not only by the translocating residue but also by a hairpin-like structure forming a tangle in the constriction. The second barrier is associated with the disentangling of this region.

Unfolding Kinetics of the Human Telomere i-Motif Under a 10 pN Force Imposed by the α-Hemolysin Nanopore Identify Transient Folded-State Lifetimes at Physiological pH.

Cytosine (C)-rich DNA can adopt i-motif folds under acidic conditions, with the human telomere i-motif providing a well-studied example. The dimensions of this i-motif are appropriate for capture in the nanocavity of the α-hemolysin (α-HL) protein pore under an electrophoretic force. Interrogation of the current vs time (i–t) traces when the i-motif interacts with α-HL identified characteristic signals that were pH dependent. These features were evaluated from pH 5.0 to 7.2, a region surrounding the transition pH of the i-motif (6.1). When the i-motif without polynucleotide tails was studied at pH 5.0, the folded structure entered the nanocavity of α-HL from either the top or bottom face to yield characteristic current patterns. Addition of a 5′ 25-mer poly-2′-deoxyadensosine tail allowed capture of the i-motif from the unfolded terminus, and this was used to analyze the pH dependency of unfolding. At pH values below the transition point, only folded strands were observed, and when the pH was increased above the transition pH, the number of folded events decreased, while the unfolded events increased. At pH 6.8 and 7.2 4% and 2% of the strands were still folded, respectively. The lifetimes for the folded states at pH 6.8 and 7.2 were 21 and 9 ms, respectively, at 160 mV electrophoretic force. These lifetimes are sufficiently long to affect enzymes operating on DNA. Furthermore, these transient lifetimes are readily obtained using the α-HL nanopore, a feature that is not easily achievable by other methods.

Capture, Unfolding, and Detection of Individual tRNA Molecules Using a Nanopore Device.

Transfer RNAs (tRNA) are the most common RNA molecules in cells and have critical roles as both translators of the genetic code and regulators of protein synthesis. As such, numerous methods have focused on studying tRNA abundance and regulation, with the most widely used methods being RNA-seq and microarrays. Though revolutionary to transcriptomics, these assays are limited by an inability to encode tRNA modifications in the requisite cDNA. These modifications are abundant in tRNA and critical to their function. Here, we describe proof-of-concept experiments where individual tRNA molecules are examined as linear strands using a biological nanopore. This method utilizes an enzymatically ligated synthetic DNA adapter to concentrate tRNA at the lipid bilayer of the nanopore device and efficiently denature individual tRNA molecules, as they are pulled through the α-hemolysin (α-HL) nanopore. Additionally, the DNA adapter provides a loading site for ϕ29 DNA polymerase (ϕ29 DNAP), which acts as a brake on the translocating tRNA. This increases the dwell time of adapted tRNA in the nanopore, allowing us to identify the region of the nanopore signal that is produced by the translocating tRNA itself. Using adapter-modified Escherichia coli tRNAfMet and tRNALys, we show that the nanopore signal during controlled translocation is dependent on the identity of the tRNA. This confirms that adapter-modified tRNA can translocate end-to-end through nanopores and provide the foundation for future work in direct sequencing of individual transfer RNA with a nanopore-based device.

Label-free nanopore proximity bioassay for platelet-derived growth factor detection.

Rapid and sensitive detection of biomarkers with ultralow concentrations remains a great challenge in disease diagnostics. Herein, we present a label-free α-hemolysin (α-HL) nanopore proximity bioassay for protein biomarker detection by a binding-induced DNA strand displacement strategy. In this bioassay, an individual target protein, platelet-derived growth factor B-chain (PDGF-BB), was selectively recognized by two oligonucleotide affinity ligands in which an output DNA was released and translocated through α-HL nanopore with a spikelike short current block. The frequency of the current block events had a linear relationship with the concentration of PDGF-BB with a wide linear dynamic range of 5 orders of magnitude and a detection limit at 500 fM. The selectivity and anti-interference capability of this bioassay show great potential for biomarker detection in bioanalytical chemistry.

A universal strategy for aptamer-based nanopore sensing through host-guest interactions inside α-hemolysin.

Nanopore emerged as a powerful single-molecule technique over the past two decades, and has shown applications in the stochastic sensing and biophysical studies of individual molecules. Here, we report a versatile strategy for nanopore sensing by employing the combination of aptamers and host-guest interactions. An aptamer is first hybridized with a DNA probe which is modified with a ferrocene⊂cucurbit[7]uril complex. The presence of analytes causes the aptamer-probe duplex to unwind and release the DNA probe which can quantitatively produce signature current events when translocated through an α-hemolysin nanopore. The integrated use of magnetic beads can further lower the detection limit by approximately two to three orders of magnitude. Because aptamers have shown robust binding affinities with a wide variety of target molecules, our proposed strategy should be universally applicable for sensing different types of analytes with nanopore sensors.