Α-helical Secondary Structure Research Articles

Ribbon α-Conotoxin KTM Exhibits Potent Inhibition of Nicotinic Acetylcholine Receptors.

KTM is a 16 amino acid peptide with the sequence WCCSYPGCYWSSSKWC. Here, we present the nuclear magnetic resonance (NMR) structure and bioactivity of this rationally designed α-conotoxin (α-CTx) that demonstrates potent inhibition of rat α3β2-nicotinic acetylcholine receptors (rα3β2-nAChRs). Two bioassays were used to test the efficacy of KTM. First, a qualitative PC12 cell-based assay confirmed that KTM acts as a nAChR antagonist. Second, bioactivity evaluation by two-electrode voltage clamp electrophysiology was used to measure the inhibition of rα3β2-nAChRs by KTM (IC50 = 0.19 ± 0.02 nM), and inhibition of the same nAChR isoform by α-CTx MII (IC50 = 0.35 ± 0.8 nM). The three-dimensional structure of KTM was determined by NMR spectroscopy, and the final set of 20 structures derived from 32 distance restraints, four dihedral angle constraints, and two disulfide bond constraints overlapped with a mean global backbone root-mean-square deviation (RMSD) of 1.7 ± 0.5 Å. The structure of KTM did not adopt the disulfide fold of α-CTx MII for which it was designed, but instead adopted a flexible ribbon backbone and disulfide connectivity of C2–C16 and C3–C8 with an estimated 12.5% α-helical content. In contrast, α-CTx MII, which has a native fold of C2–C8 and C3–C16, has an estimated 38.1% α-helical secondary structure. KTM is the first reported instance of a Framework I (CC-C-C) α-CTx with ribbon connectivity to display sub-nanomolar inhibitory potency of rα3β2-nAChR subtypes.

Combining Molecular and Spin Dynamics Simulations with Solid-State NMR: A Case Study of Amphiphilic Lysine-Leucine Repeat Peptide Aggregates.

Interpreting dynamics in solid-state molecular systems requires characterization of the potentially heterogeneous environmental contexts of molecules. In particular, the analysis of solid-state nuclear magnetic resonance (ssNMR) data to elucidate molecular dynamics (MD) involves modeling the restriction to overall tumbling by neighbors, as well as the concentrations of water and buffer. In this exploration of the factors that influence motion, we utilize atomistic MD trajectories of peptide aggregates with varying hydration to mimic an amorphous solid-state environment and predict ssNMR relaxation rates. We also account for spin diffusion in multiply spin-labeled (up to 19 nuclei) residues, with several models of dipolar-coupling networks. The framework serves as a general approach to determine essential spin couplings affecting relaxation, benchmark MD force fields, and reveal the hydration dependence of dynamics in a crowded environment. We demonstrate the methodology on a previously characterized amphiphilic 14-residue lysine-leucine repeat peptide, LKα14 (Ac-LKKLLKLLKKLLKL-c), which has an α-helical secondary structure and putatively forms leucine-burying tetramers in the solid state. We measure the R1 relaxation rates of uniformly 13C-labeled and site-specific 2H-labeled leucines in the hydrophobic core of LKα14 at multiple hydration levels. Studies of 9 and 18 tetramer bundles reveal the following: (a) for the incoherent component of 13C relaxation, the nearest-neighbor spin interactions dominate, while the 1H-1H interactions have minimal impact; (b) the AMBER ff14SB dihedral barriers for the leucine Cγ-Cδ bond ("methyl rotation barriers") must be lowered by a factor of 0.7 to better match the 2H data; (c) proton-driven spin diffusion explains some of the discrepancy between experimental and simulated rates for the Cβ and Cα nuclei; and (d) 13C relaxation rates are mostly underestimated in the MD simulations at all hydrations, and the discrepancies identify likely motions missing in the 50 ns MD trajectories.

Chemical and Biological Characteristics of Antimicrobial α-Helical Peptides Found in Solitary Wasp Venoms and Their Interactions with Model Membranes.

Solitary wasps use their stinging venoms for paralyzing insect or spider prey and feeding them to their larvae. We have surveyed bioactive substances in solitary wasp venoms, and found antimicrobial peptides together with some other bioactive peptides. Eumenine mastoparan-AF (EMP-AF) was the first to be found from the venom of the solitary eumenine wasp Anterhynchium flavomarginatum micado, showing antimicrobial, histamine-releasing, and hemolytic activities, and adopting an α-helical secondary structure under appropriate conditions. Further survey of solitary wasp venom components revealed that eumenine wasp venoms contained such antimicrobial α-helical peptides as the major peptide component. This review summarizes the results obtained from the studies of these peptides in solitary wasp venoms and some analogs from the viewpoint of (1) chemical and biological characterization; (2) physicochemical properties and secondary structure; and (3) channel-like pore-forming properties.

Unfolding and partial refolding of a cellulase from the SDS-denatured state: From β-sheet to α-helix and back

Globular proteins are typically unfolded by SDS to form protein-decorated micelle-like structures. Several proteins have been shown subsequently to refold by addition of the nonionic surfactant octaethylene glycol monododecyl ether (C12E8). Thus SDS converts β-lactoglobulin, which has mainly β-sheet secondary structure, into a state rich in α-helicality, while addition of C12E8 leads to refolding and recovery of the original β-sheet structure. Here we extend these studies to the large β-sheet-rich cellulase Cel7b from Humicola insolens whose enzymatic activity provides a very sensitive refolding parameter. The enzymes widespread usage in the detergent industry makes it an obvious model system for protein-surfactant interactions. SDS-unfolding and subsequent refolding using C12E8 were investigated at pH 4.2 using near- and far-UV circular dichroism (CD), small-angle X-ray scattering (SAXS), isothermal titration calorimetry (ITC), size-exclusion chromatography (SEC) and activity measurements. The Cel7b:SDS complex can be described as a random configuration of 3–4 connected core-shell structures in which the protein is converted to a mainly α-helical secondary structure. Addition of C12E8 recovers almost all the secondary structure, part of the tertiary structure, about 50% of the activity and dissociates part of the protein population completely from detergent micelles. The lack of complete refolding may be due to charge neutralisation of Cel7b by SDS, kinetically trapping the enzyme into aggregated structures. In support of this, aggregates did not form when C12E8 was first mixed with Cel7b followed by addition of SDS. Formation of such aggregates may be a general phenomenon hampering quantitative refolding from the SDS-denatured state.

Self-assembled polyelectrolyte complex nanoparticles as a potential carrier in protein delivery systems

BSA as a protein model was encapsulated in the alginate-based self-assembled polyelectrolyte complex nanoparticles using two distinct approaches. In the first approach, a mixture of bovine serum albumin (BSA) and alginate (ALG) solutions was added to the synthesized poly(2-(acryloyloxyethyl) trimethylammonium chloride) p(AETMACl) cationic polyelectrolyte, and the resulting polyelectrolyte complex was named as p(AETMACl)@BSA/ALG. In the second approach, the mixture of BSA and Ca2+ was added to the ALG solution. The pre-gel was formed rapidly through physical crosslinking followed by complexing with p(AETMACl) cationic polyelectrolyte and named as p(AETMACl)@BSA/ALG-Ca2+. To achieve the maximum encapsulation efficiency (EE%) for BSA, the interactions between different polymeric pairs including BSA/ALG, p(AETMACl)/BSA, and p(AETMACl)/ALG have been studied by UV–Vis spectroscopy. Maximum EE% of BSA was obtained around 100% for both approaches. Analyzing the BSA circular dichroism spectra showed a similar α-helical secondary structure for both free and released BSA after 24 h. The presence of Ca2+ in the formulations led to a decrease in the particle size from 400 to 300 nm for p(AETMACl)@ALG-Ca2+, and 1 μm to 800 nm for p(AETMACl)@BSA/ALG-Ca2+. Analyzing the release results from the Korsmeyer-Peppas kinetic model showed that the release mechanism of BSA was non-Fickian with calcium and Fickian without calcium.

Identification, expression analysis, and antibacterial activity of Apolipoprotein A-I from amphioxus (Branchiostoma belcheri).

Apolipoprotein A-I (ApoA-I) plays an important role in lipid transport and performs an antimicrobial activity in vertebrates. However, the role of ApoA-I in invertebrates remains largely unexplored. In this study, an ApoA-I gene named BbApoA-I having an open reading frame of 1466 bp and encoding a polypeptide of 345 amino acids was cloned from a cephalochordate (Branchiostoma belcheri). The predicted polypeptide revealed conserved features, including α-helical secondary structures and coiled-coil regions in known vertebrate ApoA-I sequences. Quantitative real-time PCR analysis indicated that BbApoA-I was detected in all of the tested tissues, and the highest expression was found in the hepatic cecum. The BbApoA-I expression was upregulated after the specimens were injected with lipopolysaccharide. Recombinant BbApoA-I produced in an E. coli expression system was able to bind to a wide range of Gram-positive and Gram-negative bacteria as well as lipopolysaccharide and lipoteichoic acid. In addition, rBbApoA-I exhibited in vitro antibacterial activity against Gram-negative bacteria. These results indicated that BbApoA-I performed a protective function against bacterial infection in amphioxus.

Structural and Aggregation Features of a Human κ-Casein Fragment with Antitumor and Cell-Penetrating Properties.

Intrinsically disordered proteins play a central role in dynamic regulatory and assembly processes in the cell. Recently, a human κ-casein proteolytic fragment called lactaptin (8.6 kDa) was found to induce apoptosis of human breast adenocarcinoma MCF-7 and MDA-MB-231 cells with no cytotoxic activity toward normal cells. Earlier, we had designed some recombinant analogs of lactaptin and compared their biological activity. Among these analogs, RL2 has the highest antitumor activity, but the amino acid residues and secondary structures that are responsible for RL2′s activity remain unclear. To elucidate the structure–activity relations of RL2, we studied the structural and aggregation features of this fairly large intrinsically disordered fragment of human milk κ-casein by a combination of physicochemical methods: NMR, paramagnetic relaxation enhancement (PRE), Electron Paramagnetic Resonance (EPR), circular dichroism, dynamic light scattering, atomic force microscopy, and a cytotoxic activity assay. It was found that in solution, RL2 exists as stand-alone monomeric particles and large aggregates. Whereas the disulfide-bonded homodimer turned out to be more prone to assembly into large aggregates, the monomer predominantly forms single particles. NMR relaxation analysis of spin-labeled RL2 showed that the RL2 N-terminal region, which is essential not only for multimerization of the peptide but also for its proapoptotic action on cancer cells, is more ordered than its C-terminal counterpart and contains a site with a propensity for α-helical secondary structure.

The Kinetics of Amyloid Fibrillar Aggregation of Uperin 3.5 Is Directed by the Peptide's Secondary Structure.

Many peptides aggregate into insoluble β-sheet rich amyloid fibrils. Some of these aggregation processes are linked to age-related diseases, such as Alzheimer's disease and type 2 diabetes. Here, we show that the secondary structure of the peptide uperin 3.5 directs the kinetics and mechanism of amyloid fibrillar aggregation. Uperin3.5 variants were investigated using thioflavin T fluorescence assays, circular dichroism spectroscopy, and structure prediction methods. Our results suggest that those peptide variants with a strong propensity to form an α-helical secondary structure under physiological conditions are more likely to aggregate into amyloid fibrils than peptides in an unstructured or "random coil" conformation. This conclusion is in good agreement with the hypothesis that an α-helical transition state is required for peptide aggregation into amyloid fibrils. Specifically, uperin 3.5 variants in which charged amino acids were replaced by alanine were richer in α-helical content, leading to enhanced aggregation compared to that of wild type uperin 3.5. However, the addition of 2,2,2-trifluoroethanol as a major co-solute or membrane-mimicking phospholipid environments locked uperin 3.5 to the α-helical conformation preventing amyloid aggregation. Strategies for stabilizing peptides into their α-helical conformation could provide therapeutic approaches for overcoming peptide aggregation-related diseases. The impact of the physiological environment on peptide secondary structure could explain aggregation processes in a cellular environment.

Molecular architecture of bacterial amyloids in Bacillus biofilms.

The formation of biofilms provides structural and adaptive bacterial response to the environment. In Bacillus species, the biofilm extracellular matrix is composed of exopolysaccharides, hydrophobins, and several functional amyloid proteins. We report, using multiscale approaches such as solid-state NMR (SSNMR), electron microscopy, X-ray diffraction, dynamic light scattering, attenuated total reflection Fourier transform infrared (FTIR), and immune-gold labeling, the molecular architecture of B. subtilis and pathogenic B. cereus functional amyloids. SSNMR data reveal that the major amyloid component TasA in its fibrillar amyloid form contain β-sheet and α-helical secondary structure, suggesting a nontypical amyloid architecture in B. subtilis. Proteinase K digestion experiments indicate the amyloid moiety is ∼100 aa long, and subsequent SSNMR and FTIR signatures for B. subtilis and B. cereus TasA filaments highlight a conserved amyloid fold, albeit with substantial differences in structural polymorphism and secondary structure composition. Structural analysis and coassembly data on the accessory protein TapA in B. subtilis and its counterpart camelysin in B. cereus reveal a catalyzing effect between the functional amyloid proteins and a common structural architecture, suggesting a coassembly in the context of biofilm formation. Our findings highlight nontypical amyloid behavior of these bacterial functional amyloids, underlining structural variations between biofilms even in closely related bacterial species.-El Mammeri, N., Hierrezuelo, J., Tolchard, J., Cámara-Almirón, J., Caro-Astorga, J., Álvarez-Mena, A., Dutour, A., Berbon, M., Shenoy, J., Morvan, E., Grélard, A., Kauffmann, B., Lecomte, S., de Vicente, A., Habenstein, B., Romero, D., Loquet, A. Molecular architecture of bacterial amyloids in Bacillus biofilms.

Use of a Stereochemical Strategy To Probe the Mechanism of Phenol-Soluble Modulin α3 Toxicity.

Phenol-soluble modulin α3 (PSMα3) is a cytotoxic peptide secreted by virulent strains of Staphylococcus aureus. We used a stereochemical strategy to examine the mechanism of PSMα3-mediated toxicity. One hypothesis is that PSMα3 toxicity requires fibril formation; an alternative is that toxicity is caused by soluble forms of PSMα3, possibly oligomeric. We find that the unnatural enantiomer (D residues) displays cytotoxicity comparable to that of L-PSMα3. Racemic PSMα3 is similarly toxic to enantiopure PSMα3 (L or D) under some conditions, but the toxicity is lost under conditions that cause racemic PSMα3 to aggregate. A crystal structure of racemic PSMα3-NH2 displays an α-helical secondary structure and a packing pattern that is reminiscent of the cross-α arrangement recently discovered in crystals of L-PSMα3. Our data suggest that the cytotoxicity of PSMα3 does not depend on stereospecific engagement of a target protein or other chiral macromolecule, an observation that supports a mechanism based on membrane disruption. In addition, our data support the hypothesis that toxicity is exerted by a soluble form rather than an insoluble fibrillar form.

Identification of a α-helical molten globule intermediate and structural characterization of β-cardiotoxin, an all β-sheet protein isolated from the venom of Ophiophagus hannah (king cobra).

β-Cardiotoxin is a novel member of the snake venom three-finger toxin (3FTX) family. This is the first exogenous protein to antagonize β-adrenergic receptors and thereby causing reduction in heart rates (bradycardia) when administered into animals, unlike the conventional cardiotoxins as reported earlier. 3FTXs are stable all β-sheet peptides with 60-80 amino acid residues. Here, we describe the three-dimensional crystal structure of β-cardiotoxin together with the identification of a molten globule intermediate in the unfolding pathway of this protein. In spite of the overall structural similarity of this protein with conventional cardiotoxins, there are notable differences observed at the loop region and in the charge distribution on the surface, which are known to be critical for cytolytic activity of cardiotoxins. The molten globule intermediate state present in the thermal unfolding pathway of β-cardiotoxin was however not observed during the chemical denaturation of the protein. Interestingly, circular dichroism (CD) and NMR studies revealed the presence of α-helical secondary structure in the molten globule intermediate. These results point to substantial conformational plasticity of β-cardiotoxin, which might aid the protein in responding to the sometimes conflicting demands of structure, stability, and function during its biological lifetime.

Recombinant flagellins with deletions in domains D1, D2, and D3: Characterization as novel immunoadjuvants

Bacterial flagellin activates the innate immune system and ultimately the adaptive immune system through a Toll-like receptor 5 (TLR5)-dependent signaling mechanism. Given that TLR5 is widely distributed in epithelia, flagellin is currently being developed as a mucosal adjuvant. Flagellin FliC from Salmonella enterica has four domains: the conserved D0 and D1 domains and the hypervariable D2 and D3 domains. The deletion of D3 and partial deletion of D2 in the recombinant FliCΔ174-400 strongly impairs flagellin’s intrinsic antigenicity but does not affect the TLR5-dependent immunostimulation activity, i.e., the capacity to promote innate responses and adaptive responses to co-administered antigens. Here, we describe the development of novel recombinant flagellins with various deletions encompassing all of D2 and D3, and part of D1. Most of the recombinant molecules conserved an α-helical secondary structure that was as resistant to heat denaturation as the native protein. Whereas the recombinant flagellins’ ability to trigger TLR5 varied markedly in vitro, most gave equivalent in vivo TLR5-dependent innate immune responses following intranasal administration of 2 μg of flagellin to mice. Concordantly, the recombinant flagellins were also valuable respiratory adjuvants for eliciting antibody responses to the foreign antigen ovalbumin, although their intrinsic antigenicity was decreased compared to the native flagellin and not increased compared to FliCΔ174-400. Our results show that the additional deletions of D2 and the distal part of D1 of FliCΔ174-400 does not impact on antigenicity and does not significantly modify the immunostimulatory adjuvant activity. Altogether, this study generated a novel set of recombinant flagellin that constitutes a portfolio of TLR5-dependent candidate adjuvants for vaccination.

Sequence and length optimization of membrane active coiled coils for triggered liposome release

Defined and tunable peptide-lipid membrane interactions that trigger the release of liposome encapsulated drugs may offer a route to improving the efficiency and specificity of liposome-based drug delivery systems, but this require means to tailor the performance of the membrane active peptides. In this paper, the membrane activity of a de novo designed coiled coil peptide has been optimized with respect to sequence and size to improve release efficiency of liposome encapsulated cargo. The peptides were only membrane active when covalently conjugated to the liposomes. Two amino acid substitutions were made to enhance the amphipathic characteristics of the peptide, which increased the release by a factor of five at 1 μM. Moreover, the effect of peptide length was investigated by varying the number of heptad repeats from 2 to 5, yielding the peptides KVC2-KVC5. The shortest peptide (KVC2) showed the least interaction with the membrane and proved less efficient than the longer peptides in releasing the liposomal cargo. The peptide with three heptads (KVC3) caused liposome aggregation whereas KVC4 proved to effectively release the liposomal cargo without causing aggregation. The longest peptide (KVC5) demonstrated the most defined α-helical secondary structure and the highest liposome surface concentration but showed slower release kinetics than KVC4. The four heptad peptide KVC4 consequently displayed optimal properties for triggering the release and is an interesting candidate for further development of bioresponsive and tunable liposomal drug delivery systems.

Circular permutation of a bacterial tyrosinase enables efficient polyphenol-specific oxidation and quantitative preparation of orobol.

Tyrosinase is a type 3 copper oxygenase that catalyzes a phenol moiety into ortho-diphenol, and subsequently to ortho-quinone. Diverse tyrosinases have been observed across the kingdom including Animalia, Bacteria, Plantae, and Fungi. Among the tyrosinases, bacterial, and mushroom tyrosinases have been extensively exploited to prepare melanin, ortho-hydroxy-polyphenols, or novel plant secondary metabolites during the past decade. And their use as a biocatalyst to prepare various functional biocompounds have drawn great attention worldwide. Herein, we tailored a bacterial tyrosinase from Bacillus megaterium (BmTy) using circular permutation (CP) engineering technique which is a novel enzyme engineering technique to covalently link original N and C termini and create new termini on the middle of its polypeptide. To construct a smart rationally-designed CP library, we introduced 18 new termini at the edge of each nine loops that link α-helical secondary structure in BmTy. Among the small library, seven functional CP variants were successfully identified and they represented dramatic change in their enzyme characteristics including kinetic properties and substrate specificity. Especially, cp48, 102, and 245 showed dramatically decreased tyrosine hydroxylase activity, behaving like a catechol oxidase. Exploiting the dramatic increased polyphenol oxidation activity of cp48, orobol (3'-hydroxy-genistein) was quantitatively synthesized with 1.48 g/L, which was a 6-fold higher yield of truncated wild-type. We examined their kinetic characters through structural speculation, and suggest a strategy to solubilize the insoluble artificial variants effectively.

Structural, kinetic and thermodynamic characterizations of SDS-induced molten globule state of a highly negatively charged cytochrome c.

This study presents the structural, kinetic and thermodynamic characterizations of previously unknown submicellar concentrations of SDS-induced molten globule (MGSDS) state of a highly negatively charged base-denatured ferricytochrome c (UB-state) at pH ∼12.8 (±0.2). The far-UV CD, near-UV CD, ANS-fluorescence data of UB-state in the presence of different concentrations of SDS indicate that the submicellar concentrations of SDS (≤0.4 mM) transform the UB-state to MGSDS-state. The MGSDS-state has native-like α-helical secondary structure but lacks tertiary structure. The free energy change (ΔG°D) for UB→ MGSDS transition determined by far-UV CD (∼2.7 kcal mol-1) is slightly higher than those determined by fluorescence (∼2.0 kcal mol-1) at 25°C. At very low SDS and NaCl concentrations, the MGSDS-state undergoes cold denaturation. As SDS concentration is increased, the thermal denaturation temperature increases and the cold denaturation temperature decrease. Kinetic experiments involving the measurement of the CO-association rate to the base-denatured ferrocytochrome c at pH ≈12.8 (±0.2), 25°C indicate that the submicellar concentrations of SDS restrict the internal dynamics of base-denatured protein.

Cell-selectivity of tryptophan and tyrosine in amphiphilic α-helical antimicrobial peptides against drug-resistant bacteria

The increasing emergence of drug-resistant bacteria creates a requirement for new antibiotics and various types of antibiotic materials such as proteins, peptides, polymers, and chemical compounds. Among these, antimicrobial peptides (AMPs) are considered to be promising antibiotic candidates for clinical treatments. In this study, we have designed a novel series of peptides with repeated sequences of minimum membrane-active motif, ‘XWZX’ basic sequence (X: lysine or arginine, Z: leucine, tyrosine, valine, or glycine), and an α-helical secondary structure. Some peptides displayed a potent antibacterial activity via membranolytic action and high therapeutic index (toxic dose/minimum inhibitory concentration) in vitro. Furthermore, in vivo experiments using bacterial ear-skin infection models verified that these peptides have the potential to be powerful and safe antibiotics. The present study provides a lead sequence for designing peptide antibiotics against bacterial membranes and information for cell-selectivity of hydrophobic amino acids with aromatic side chains such as Trp and Tyr.

Nonfunctional Missense Mutants in Two Well Characterized Cytosolic Enzymes Reveal Important Information About Protein Structure and Function.

The isolation and characterization of 42 unique nonfunctional missense mutants in the bacterial cytosolic β-galactosidase and catechol 2,3-dioxygenase enzymes allowed us to examine some of the basic general trends regarding protein structure and function. A total of 6 out of the 42, or 14.29% of the missense mutants were in α-helices, 17 out of the 42, or 40.48%, of the missense mutants were in β-sheets and 19 out of the 42, or 45.24% of the missense mutants were in unstructured coil, turn or loop regions. While α-helices and β-sheets are undeniably important in protein structure, our results clearly indicate that the unstructured regions are just as important. A total of 21 out of the 42, or 50.00% of the missense mutants caused either amino acids located on the surface of the protein to shift from hydrophilic to hydrophobic or buried amino acids to shift from hydrophobic to hydrophilic and resulted in drastic changes in hydropathy that would not be preferable. There was generally good consensus amongst the widely used algorithms, Chou-Fasman, GOR, Qian-Sejnowski, JPred, PSIPRED, Porter and SPIDER, in their ability to predict the presence of the secondary structures that were affected by the missense mutants and most of the algorithms predicted that the majority of the 42 inactive missense mutants would impact the α-helical and β-sheet secondary structures or the unstructured coil, turn or loop regions that they altered.

Investigating Polyoxometalate-Protein Interactions at Chemically Distinct Binding Sites.

In this study, a combined molecular docking (rigid and flexible) and all-atom molecular dynamics simulations technique have been employed to investigate interactions of 1:1 Zr-containing Keggin polyoxometalate (ZrK) with four chemically distinct cleavage sites [Arg114-Leu115 (site 1), Ala257-Asp258 (site 2), Lys313-Asp314 (site 3), and Cys392-Glu393 (site 4)] of human serum albumin (HSA). The ZrK-HSA complexations were analyzed using electrostatic potentials, the chemical nature of amino acid residues, binding free energies, and secondary structures as parameters. They suggested that ZrK binds in a rather distinct manner to different cleavage sites, and its association was dominated by hydrogen bonding, both direct and solvent mediated, and electrostatic interactions, as suggested experimentally. The computed binding free interaction energies (-57.5, -24.2, -50.8, and -91.2 kJ/mol for sites 1, 2, 3, and 4, respectively) predicted the existence of one major binding site (site 4) and three minor binding sites (site 1, site 2, and site 3). The strong exothermicity of the binding was also supported by isothermal calorimetry experiments. Additionally, the binding of ZrK did not alter the overall α-helical secondary structure of HSA, which was in line with experimental observation. Furthermore, hydrolysis of the peptide bonds of the substrate was found to retain its overall structure. These results have provided a deeper understanding of the complex ZrK interactions with proteins, and they will lead to the design of the next generation of catalytically active polyoxometalates with improved hydrolytic activities.

Graphene Oxide-Assisted Accumulation and Layer-by-Layer Assembly of Antibacterial Peptide for Sustained Release Applications.

Fabrication of antibacterial materials with sustained release of active components is of great importance for long-term antibacterial applications. Graphene oxide (GO) has been found to be an excellent carrier for accumulating the antibacterial peptide of G(IIKK)4I-NH2 and mediating its loading into the layer-by-layer (LBL) films for sustained release applications. G(IIKK)4I-NH2 takes random coiled conformation in monomeric state below 0.17 mM but self-assembles into supramolecular aggregates with α-helical secondary structure at higher concentrations. It can bind onto GO surface in both monomeric and aggregate states to form stable GO@G(IIKK)4I-NH2 composites. Upon binding, the local amphiphilic environment of GO surface induces a conformational transition of G(IIKK)4I-NH2 monomers from random coils to α-helix. The aggregate binding enhances the loading amount greatly. GO (1 mg) can load as high as 1.7 mg of peptide at saturation. This enables the GO@G(IIKK)4I-NH2 composites to serve as reservoirs for sustained release of active G(IIKK)4I-NH2 monomers. Moreover, G(IIKK)4I-NH2 itself shows low efficiency in LBL assembly, whereas the GO@G(IIKK)4I-NH2 composites are ideal LBL assembling units with highly enhanced loading efficiency of G(IIKK)4I-NH2. The LBL films involving degradable poly(β-amino esters) can realize sustained release of G(IIKK)4I-NH2 for bacteria killing in a well-controlled manner. This study demonstrates an efficient strategy for fabrication of long-durable antibacterial materials and surface coatings by using GO as the carrier for drug accumulation and loading.

Interaction of the Fungicide Tebuconazole with Human Serum Albumin: A Preliminary Study

Abstract The interactions between the fungicide tebuconazole and human serum albumin were investigated using fluorescence and circular dichroism spectroscopies. The experimental results showed that the fluorescence quenching of the protein by the tebuconazole molecule was a result of the formation of a ligand-protein complex with a binding constant of 8.51×103 l.mol−1 and the number of binding sites in the macromolecule was close to 1. These findings demonstrated the fact that although the binding affinity of tebuconazole to the protein may be slight, it was very similar to other triazole fungicides. In addition, tebuconazole stabilized the α-helical secondary structure of the human serum albumin due to the increase of the α-content in the protein macromolecule.